Requirement

• Valid Singapore Driver's License
• Valid Building safety course BCSS
• Minimum 2-5 years of lorry driving experience Clean driving record
• Defensive driving techniques
• Basic vehicle maintenance and inspection
• Ability to work independently and as part of a team
• Physical fitness for long hours of driving
• Good eyesight and hearing
• Reliable and punctual
• Strong attention to detail
• Ability to manage stress and fatigue
• Flexibility and adaptability
• Honesty and integrity

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Job Responsibilities

- To perform both on site recovery as well as workshop repair of electro optics products.

- To perform Preventative and Corrective Maintenance and simple routine checks and servicing.

Job Requirements

- Diploma in Mechatronic or Mechanical or Electrical & Electronics Engineering or Computer Engineering

- Skills in identifying and resolving technical issues, including fault isolation techniques.

- Hands-on experience with repairing or replacing defective components

- Prefer ability to accurately calibrate optical instruments and sensors to ensure optimal performance.

- Posses class 3 driving license.

- ⁠Able to commit to be on standby 24 X 7

⁠- Training will be provided

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

- supervise Plumbing & Sanitary installation works

- Liaising with authorities

- licensing

- resolve engineering issues

- attend meetings with supplier, sub contractor, main contractor, consultant, and authority

- submit reports

- attend inspections with supplier, sub contractor, main contractor, consultant, and authority

Our client is from Construction Industry. They are looking for a WSH Officer to assist their Engineer team for the next phrase of their business. They are located Islandwide of Singapore– easily accessible. The WSH Officer is responsible for:

Duties

• Effectively lead the safety team and ensure the implementation of Workplace Safety & Health (WSH) Management Systems to minimize risks and accidents.
• Review and update all risk assessments to maintain compliance with WSH regulations and legal standards.
• Investigate on-site incidents and implement corrective measures to prevent recurrence.
• Ensure adherence to WSH Act provisions, enforce safety measures, and conduct regular inspections to ensure compliance among staff and subcontractors.
• Ensure the effectiveness of fire protection systems and emergency response management for the office and factory.
• Promote a strong safety culture through training, awareness campaigns, and employee engagement activities like drills and competitions.
• Liaise with statutory bodies, keep up to date on WSH regulations, and ensure compliance with waste management and licensing requirements.

Requirements

• Registered as WSHO with MOM
• Min 3 years of experience performing as a WSHO
• Relevant Qualification in Workplace, Safety and Health / Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Purchasing / Procurement Assistant / Executive

• S$ 2,300 to 3,000
• Location: Jurong
• Monday to Friday 9am – 6pm (Friday off at 5:30pm)

Job Overview:

The Purchaser/Procurement Specialist will be responsible for sourcing materials, equipment. The role involves working with suppliers, negotiating contracts, and ensuring timely delivery, using SAP or IFS systems to manage procurement processes.

Key Responsibilities:

• Source and select suppliers.
• Negotiate prices and contracts.
• Manage purchase orders using SAP or IFS.
• Coordinate with suppliers for on-time deliveries.
• Ensure procurement costs are within budget.
• Maintain records of purchases and supplier interactions.

Skills & Qualifications:

• Experience with SAP or IFS
• Experience in procurement, preferably in engineering field.
• Proficiency in Microsoft Office.
• Training provided

Apply now for Interview arrangement

Daniel Wong Reg No: R2095781

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Our client is from Construction Industry. They are looking for a Assistant Contract Manager to assist their Contract team for the next phrase of their business. They are located at North of Singapore– easily accessible. The Assistant Contract Manager is responsible for:

Duties

• Assist in preparing tenders and commercial bids to attract new business.
• Develop and present project proposals; meet with clients to understand their needs.
• Draft, review, and negotiate business contract terms, and resolve any contractual disputes.
• Create plans, estimate costs and timelines, and oversee construction schedules while managing unexpected costs.
• Act as the primary contact between clients, site teams, project managers, and third parties, ensuring all roles are clear.
• Attend site meetings, track progress, analyze outcomes, and prepare detailed reports, including cost analyses and variations.
• Oversee project execution, optimize resources, and address disputes or complaints as needed.

Requirements

• Degree / Diploma in Quantity Surveying / Building or equivalent
• Minimum 5 years of related working experience in residential and industrial projects.
• Good working knowledge in Mechanical and Electrical.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Description:

• You will be responsible for providing sterile and serviceable surgical instruments and equipment.
• You will be involved in the decontamination, inspection, preparation, packaging, sterilization, storage and distribution of the sterile devices to operating theatres and procedural rooms.
• You will also be involved in projects involving work-process improvements as you gain experience in the department.

Requirements:

• Min Diploma in any Engineering
• Able to commit to rotating day & night shift work
• No exp needed, training provided

Location: Outram

Working hours: 3 rotating shifts (8am to 4.35pm; 1pm to 9.35pm; 9pm to 7.30am)

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

-Taking charge liaising with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality

-In Charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all related government agencies, aviation authorities and customers’ requirements and regulations

n Charge of reviewing and revising quality procedures and quality control instructions and performing of internal audits to evaluate quality system, products, and processes

We're looking for a personnel who would be a specialist for marine electrical practical knowledge to handle/control & monitor & expart to solve problem for all the project site. He/she must know to design and plan for the project & save the overall production cost. He/she must prove his/her capability by the performance. He/she should have a proper knowledge to maintain of job responsibility & punctuality. He/she must respect & follow every rules_regulation & restriction Of the organization.

Above all we're looking for someone who has a capability to perform high productivity with lower salary.

Job Description
• Industry/ Organization Type: Manufacturing/Production
• Position Title: CNC Programmer
• Working Location: Ubi
• Working Hours: Monday – Friday, 8.30 am – 5:30 pm
• Salary Package: $2500 -$4000


Key Responsibilities
• Develop programs based on drawing details, customer specifications, and requirements.
• Prepare setup sheets, including tool lists and cutting parameters, to support the production team in meeting quality and safety standards.
• Regularly update programs and generate setup sheets for each part as necessary.
• Assist in reviewing and approving program sheets.
• Perform other duties as required.

• Proficiency with CAD/CAM Software, SolidWorks, and PLC Programming.
• Strong knowledge of milling tooling and machining processes.
• At least 3 years of experience in CNC milling manufacturing

Job Description:

The person will be working with site personnel, site activities and be highly involved in the following aspects of the business but not limited to the below:

· Project management, site meeting and coordination.

· Technical study, identify variation works and submit accurate cost implication.

· Able to schedule, supervise and control sub-contractors to carry out their works accurately and timely in accordance to the contract drawings and specifications.

· Experience in managing a technical project, documentation and have an established network of vendors, suppliers & contractors will be an advantage.

· Undertake ad-hoc duties as assigned.

Job Requirements:

· NITEC / Diploma in Electrical Engineering

· Minimum 1 to 3 years of working experience in the related field is required for this position.

· Possess relevant safety certificates (BCSS) will be an advantage

· Willing to travel base on project site.

· Ability to communicate in English to liaise with suppliers

· Ability to work independently and meet tight project schedules

· Highly communicative and self-motivated individual personality

Interested candidates who wish to apply for the advertised position, please submit your application.

Please state your

· Last drawn & Expected salary

· Notice Period / Availability

(We regret to inform that only shortlisted candidates would be notified)

Prepare service reports for all equipment.

• Hands-on Experience In Servicing Air Compressors, Vacuum Systems,

Thermal Spray Machines, Blasting Pots, Spray Pumps, And Power Tools.

• Basic knowledge of electrical applications and circuitry.

• Able to read and interpret electrical diagrams.

• Responsible for the installation, setup, testing, and commissioning of equipment.

• Provide day-to-day production support to troubleshoot issues with thermal spray

equipment.

• Perform preventive maintenance, troubleshooting, and repairs.

• Provide direction on proper routine and preventative maintenance for spray/coating

equipment.

• Troubleshoot and rectify system faults on equipment.

• Conduct root cause analysis for machine failures.

• Execute equipment improvement projects and modifications.

• Maintain logs and records of work performed, including materials and equipment used.

• Replace worn components before mechanical or electrical breakdowns occur.

• Ensure all repairs and installations comply with safety standards.

• Maintain a clean, organized, and safe work area, including clear access ways and proper

safety signage.

• Work closely with the Project Team and Client to ensure smooth operations.

• Develop and maintain work instructions for proper maintenance of equipment.

• Perform ad-hoc duties as assigned.

• Training will be provided.

Job Requirements

• A minimum of a Degree in an Engineering-related field.

• At least 3 years of experience in electrical work.

• Strong interpersonal and communication skills.

• Proficiency in spoken and written English is a must.

• Self-motivated and results oriented.

• Solid background in troubleshooting and hands-on repair work.

• Willing to work rotating shifts and weekends as needed.

• Ability to travel overseas.

• Flexible and capable of multitasking in a dynamic environment.

• Must be hands-on and willing to work on shifts

Responsibilities:

• Perform preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensure all preventive and corrective maintenance, including service report from vendors are documented
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usage
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involve in internal and external audits when required
• Any other duties as assigned

Requirements:

• Higher Nitec / Diploma in Electrical/Mechanical/Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands on in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Able to work at height with MEWP
• Able to support after office hours and weekend when needed
• Well verse in Microsoft office applications
• Able to read and interpret schematics

Key Responsibilities and Accountabilities :

1. To work and co-ordinate with design/construction teams for all M&E installation and system requirement matters

2. To attend E&M Co-ordination Meetings and write Minutes of Meeting

3. To co-ordinate with Civil/BIM teams & all SWC for station and viaduct CCSM/SEM drawings and submissions

4. Review project specifications, technical clarifications and construction drawings

5. Manage in-house E&M sub-contractors’ work to ensure shop drawing and services are well co-ordinated to suit sequence and installation

6. Supervise and lead an installation team on E&M services installation in construction environment

Requirements :

1. Degree / Diploma in Mechanical/Electrical Engineering and/or Specialist Diploma in M&E co-ordination will be an advantage

2. At least 5 years experience in LTA projects M&E Coordination in local construction firm/LTA-MRT Project

3. Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential

4. Good knowledge of local standards & requirements

5. Understanding of a Design & Build contract/project

6. Independent, self-motivated, proactive with a positive attitude

Job Responsibilities:

1. Oversee the development, maintenance and improvement QA/QC system in the project

2. Maintain and implement quality control system and tracking records

3. Conduct site inspection to ensure quality works, and done in accordance to shop drawings/work instructions

4. Ensure compliance with statutory requirements and ISO standards

5. Liaise with suppliers and subcontractors to ensure quality control and adherence to standards

6. Conduct quarterly internal audit and follow through the action plan established for closure

7. Monitor workmanship quality compliance with requirements

8. Report to Project Director/Manager on non-conforming product or services

Job Requirements:

• Bachelor’s degree or its equivalent
• At least 3 years of related working experience
• Possess ISO Internal auditor certificate (added advantage)
• Safety Conscious Mindset
• Able to work in a team

* 12 hours rotating shift

* Location: Bedok

* Basic + Shift Allowance + OT pay

* Permanent

Our client is a Semiconductor testing services to Major Semicon related MNCs. Our client is also one of the Top Ten Semiconductor in globally.

Engineering Technician Job Description :

• Assisting engineering teams in setting up the test equipment for engineering and production.
• Manage all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.
• Perform Test program correlations and reject verifications.
• Prepare Test hardware for remote testing, ability to load and do sanity check on test program.
• Carry out characterization or sample screening based on internal team request.

Requirements:

• Diploma in Electronic / Electrical /Mechatronic/IT/ Biochemical/Mechanical/computer/Architecture Engineering / Higher Nitec/Nitec in Electronics/Electrical / Mechatronic/ IT/Biochemical/ Mechanical/ computer/ Architecture
• Day shift to start with ; 3 days work on ODD workweek, 4 days work on EVEN workweek. will need to be flexible to work in staggered or night shifts as required by business needs.
• Experience in HTOL support
• Experience with ATE Tester. Experience with 93K will be added advantage
• Hands on experience with Handlers, Probers, thermo stream testing equipment or bench test equipment.
• Experience in working at production/engineering semiconductor test facilities
• Ability to use Microsoft Words, Excel and PowerPoint

HOW TO APPLY:
Interested applicants, please click on “Apply Now” or email to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Jason Bong Wee Kiat
EA Personnel Reg. No.: R23116067

- Review and verify all the project documents, maintain and update the records of engineering and site works

- Coordinate and supervise M&E onsite works and projects

- Attend MEP meetings and site inspection to follow up the site progress

- Ensure the site work in order and comply with the authorities and contract requirement

- Manage and arrange RTO in performing the inspection and supervision of MEP works, ensure the quality of works

Job Requirement

1) Degree in M&E Engineering from a university accredited by the Singapore Professional Engineers Board (PEB)
2) Registered Resident Engineer (M&E) with IES/ACES

3) Initiative, can work and solve issues independently

4) Prefer those minimum 2 years experiences in supervisory position and 3 years experiences in construction industry (Entry/Junior level may considered)

5) Project Location: Tuas

• Oversee all architectural works on site.
• Attend meetings with client’s representative, consultants and main contractor.
• Feedback to drafting and design teams on updates and developments during meetings.
• Review project specifications, technical clarifications and construction drawings.
• Carry out architectural work scheduling, material requisition, cost control, project supervision and documentation.
• Ensure work activities are carried out in safe working environment Coordinate with Architect, Structural and M&E staff members and sub-contractors to resolve related issues.
• Prepare, interpret and coordinate all types of drawings in relation to the project (construction, shop drawings, as-built etc)
• Ensure prompt circulation and proper drawing control to be used or as reference.
• To check, coordinate and develop drawings to ensure quality drawing to avoid conflicts win the Consultant and Contractor drawings.
• To consolidate and coordinate all type of documents used for approval process to relevant parties and ensure proper searchable records.
• Identify the elements of project design and construction likely to give rise in disputes and claims.

Job Description:

• Responsible for accomplishing the project objectives within the constraints such as project scope, time, cost and qualityInterpret technical designs and drawings for construction on-site
• Ensure the project complies with regulations and clients’ specifications
• Coordinate M&E services and prepare CSD/SEM drawings for submission
• Coordinate the integration of Civil, Architectural and M&E works on site with clients, consultations and subcontractors
• Plan, develop and monitor work schedules to ensure timely completion of allocated tasks and schedules
• Prepare reports to clients and project manager on progress, delays, defects and rectification measures for the M&E works
• Provide technical advice and resolve M&E technical issues
• Reporting the progress of M&E works and arranging site inspections with system-wide contractors, sub-contractors and clerk-of-works

Requirement:

• Degree in Mechanical or Electrical Engineering
• Minimum 5 years of relevant experience

Job Responsibilities:

• Coordinate maintenance activities for facilities and equipment to ensure optimal performance and reduce downtime.
• Ensure machinery and equipment (e.g., generators, excavators) function properly to support production and operational needs.
• Coordinate tasks and resources across the machinery & equipment maintenance team and the logistics & operations team to meet goals and deadlines.
• Oversee and ensure safety protocols are followed by the Operations and Logistics teams during activities.
• Address operational challenges, implementing solutions to maintain efficiency and productivity.
• Lead daily tasks, including completing daily reporting.

Job Requirements:

• Diploma in maintenance or mechanical engineering (minimum requirement).
• 2-5 years of experience in the machinery and equipment field.
• Knowledge of equipment and machinery maintenance procedures.
• Familiarity with logistics and operations is an advantage.
• Basic proficiency with IT and software operation.
• Valid Class 3 driving license (optional).
• People-oriented, task-focused, with a positive work attitude.
• Strong organizational and communication skills.
• Ability to multitask, prioritize effectively, and manage time well.
• Strong problem-solving skills and attention to detail.
• Willingness to travel to various project sites as needed.

Working Hours: 8am-8pm (Mon-Sat), Project based.

Wecruit Pte Ltd | 20C0270

Tew Jie Wei | R22106822

To provide workplace safety & health (WSH) enforcement support, ensure safe work procedures are implemented. enforce site safety practices, organize site safety & health awareness program, conduct audit, meeting and reports for relevant parties. maintain the iso standards in ISO140001 and ohsas45001.

• Degree/Diploma in Engineering or equivalent
• Minimum 3 years of experience
• Good communication skills
• Good Interpersonal skills

Role and Responsibilities:-

• Coordinate and assist in daily operation of the M&E services, such as carrying out all planned maintenance schedules and periodic inspection, and up-keep of the estate's common area
• To perform weekly check on the estate's M&E system, including minor troubleshooting on failure of systems
• To carry out minor troubleshoot on any failure on the M&E systems
• To maintain a proper stock control for all mechanical/electrical accessories and materials purchase
• To respond to ad-hoc complaints received from the Management office from time to time
• To respond and attend to all emergency calls, and for reinforcement of manpower during major breakdown of M&E equipment within the estate's common area
• To ensure that service contractor conduct the servicing properly and in accordance to the service contract
• To follow external contractors that is at site to carry out routine servicing
• To attend to any other job function on M&E related issues that may be assigned from time to time
• To carry out minor items of repair and handyman job, such as repair of fixtures / fittings and touch up painting

Requirements:-

• GCE O Level / NTC 2/3 or Nitec / HigherNitec in Mechanical / Electrical / Building
• At least 1 year of experience in maintenance of M&E systems and building facilities

Candidates who are able to start immediately will be prioritized.

Interested candidates kindly WhatsApp resume and below details to 9855 1978:-

• Notice to current employer
• Earliest start date
• Stay location
• Expected salary

Job Description:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering