· Prepares and submit shop drawings / As Built Drawings.

· Attend all coordination meeting regards to technical issues.

· To support Marketing, QS / Project Departments in technical enquiries.

· Able to manage the process from sample submission, production such as cutting list or fabrication drawings etc.

· Able to manage & liaise with sub-contractors, Main-contractors and client’s engineers.

· Project filing or drawings in Soft Copy and Hard Copy is required

· Create any freehand drawings / sketches to initiate preliminary drawings, including of cutting list

· Studies and examines drawings and specification of tender requirement.

· To attend on going site meeting and liaise with contractors, suppliers and clients to meet the requirements of the ongoing tender/project works

· To oversee the design department and give support to junior drafter

· Any other tasks assigned by superior

*Coordinate, monitor and issuing of engineering document, making of prototype and implementation of new products effectively and efficiently so as to ensure that quality, delivery and cost of prototype and new products are competitive at all time.

1. Coordinate, administration and issuing of engineering documents.

a. Process and issuing of ORF based on the requirement of Parts / Products Manufacturing Specification (PMS) - TERRA.

b. Convert the ORF into electronic copies

c. Periodic review of all engineering documents issued and the status of implementation for the purpose of traceability.

*Provide Engineering base management analysis such as Failure Mode Evaluation Analysis, FMEA, (Potential Failure Mode Analysis) on all cost factors at the time of prototype stage to Product Production, so as to ensure that new product’s Factory Cost (FC) are competitive in the market.

1. Administration and collaborate Prototype making and controls.

a. Coordinate the Prototype making by supporting on all the Engineering aspect.

b. Provide in sourcing of new parts as per prototype requirement.

c. Execute Supplier / Vendor audits and verification for the decision of selecting suppliers / vendors.

d. Verify material lists, drawings before providing to suppliers / vendors for quotation.

e. Made plans, schedules and information sharing to all related department so as to ensure that prototype is made on time.

f. Conduct periodic reviews of all prototype making so as to ensure systematic approaches had been made based QDC.

g. Provide solution for any prototypes that required to be mass production so as to keep the prototype cost competitive at all time.

Salary: $2500-$2800+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

• Assist the Manager to oversee and manage the Engineering Department.
• Technical review on new project orders and order assignments to Technical engineer & Drafter team.
• Ensure timely submission of engineering documents (Control Schematic Drawing, General Assembly Drawing, Wiring Diagram, Nameplate Drawing, Test Procedure, Data Sheet etc).
• To review project engineering documents prepared by Technical Engineer & Drafter team before submitting them to client.
• Provide advice and guidance to Technical Engineer & Drafter team for any technical queries and to support other ops team on various aspects of technical/engineering matters.
• To check and make recommendations based on common industrial engineering practice.
• To provide and implement cost effective and best engineering solutions for project to stay competitive.
• To provide sound engineering practice and engineering calculation where applicable in a timely manner to meet project timeline.
• To review international standards and/or project specifications for product compliance. i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards etc related to Valve Automation and/or instrumentation.
• Providing field support for customers to resolve after-sales technical issues or technical clarifications.
• To attend internal/external kick off Meeting (KOM) when required.
• Travel with technicians to installation base and sites if the need arises.
• To assist manager to lead the department’s improvement programs and/or process efficiency initiatives.
• To assist manager in maintaining and updating the department's Standard Operating Procedures.
• To carry out Engineering personnel annual performance review to ensure competency and give counselling when required.
• Support new employee orientation by providing brief engineering department process flow training.
• Support and guide the Operations department in resolving aftermarket technical issues such as Product Design changes / Fault Finding / Supplier Discrepancies.

Requirements:

• Bachelor’s Degree / Diploma in Mechanical/Instrumentation or equivalent
• Minimum 6 to 8 years supervisory experience in Valve Automation and/or instrumentation background, preferably in the Valves & Actuators field for Oil & Gas Market.
• Conversant with ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation.
• Possess a strong knowledge of pneumatic and hydraulic circuits.
• Must be able to read and interpret drawings, specifications, and technical documents.
• Knowledge of AutoCAD 2D/3D or drafting software & SAP will be an added advantage.
• Familiar and possess intermediate knowledge in Microsoft Office and Microsoft 365
• Very self-driven and able to drive the team. Possess strong interpersonal skills and can work as a team.
• Strong verbal and written communication skills

Salary: $2500-$2800+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

First 3 months probation basic $2600, after confirmation is $2700!

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Descriptions

• Work closely with Technical Engineer to translate customers' requirements into detailed drawings for tender submission, projects, etc.
• Ensure drawings meet relevant code and compliance requirements
• Rectify and update latest drawings accordance to changes
• Maintain good document control - ensuring drafting list record is always up to date
• On site measurement if required

​ Job Requirements :-

• Min. 3 years of experiences in Aluminium / Construction / Architectural or relevant industry
• ITE / Diploma in Civil Engineering / Structural / any other relevance qualification
• Proficient in AutoCAD
• Strong sense of accountability and ability to quickly prioritize tasks based on urgency in a fast paced environment
• Excellence analytical, communication, organizing and interpersonal skills
• Independent but also a team player

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The School plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The School’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

For more details, please view School of Civil and Environmental Engineering | NTU Singapore.

We are looking for a Research Fellow to work on a project ‘Innovative structure systems for next-generation construction’. The role will focus on conducting experimental and numerical studies on novel joints for modular structures and developing new design methods.

Key Responsibilities:

• Conduct experiments on modular structures
• Conduct numerical modelling
• Assess existing design codes
• Propose new improved design methods

Job Requirements:

• PhD degree in Structural Engineering from reputable universities or related field
• Familiarity with Eurocodes on steel and composite structures
• Good written and oral communication skills
• Proficiency in hard skills / job-specific abilities acquired through training e.g. specific programming languages, numeric and analytical skill
• Competent in soft skills / general personality traits: Information visualization, interaction design
• Interpersonal skill: Ability to work independently / develop solutions under strict timelines, meticulous and eye for details / excellent organizational / time management skills)
• Entry level candidates are welcome to apply

We regret to inform that only shortlisted candidates will be notified.

• Up to $2500
• 5.5 day work per week
• Tuas

Responsibilities:

• Perform maintenance and repairs on crane and hoist systems to ensure optimal performance.
• Diagnose and repair mechanical and electrical issues efficiently.
• Assist with the installation of new crane and hoist systems per safety standards.
• Conduct load testing to verify system safety and document results.
• Ensure all work complies with safety regulations and company policies.

Additional Information:

• Candidate possess with electrical and crane/hoist servicing basic knowledge will be added advantage
• Required to WORK AT HEIGHT.
• Willing to learn, positive work attitude and good team player.
• Willing to work overtime when required. OT available.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

The School of Materials Science and Engineering (MSE) provides a vibrant and nurturing environment for staff and students to carry out inter-disciplinary research in key areas such as Computational Materials Science, Characterisation Materials Science, Defence Composite Materials, Functional Composite Materials, Energy, Nanomaterials, Low Dimensional Materials, Biomaterials Materials, Biological Materials, Bioinspired Materials and Sustainable Materials.

For more details, please view https://www.ntu.edu.sg/mse/research.

We are seeking a highly motivated research fellow to join our dynamic team at the School of Materials and Science Engineering at Nanyang Technological University, Singapore. The successful candidate will contribute to cutting-edge research at the intersection of materials science, advanced manufacturing, robotics, and sensing.

Key Responsibilities:

• Conduct independent research in areas related to material science and engineering in soft robotics/self-healing / soft interfaces
• Develop and implement robotic control systems
• Optimization of formulation for UV 3D printing / direct ink writing 3D printing
• Contribute to ongoing soft robotics research
• Design and prototype using CAD software and 3D printing technologies
• Collaborate with faculty and other researchers on interdisciplinary projects
• Publish research findings in peer-reviewed journals and present at conferences
• Assist in mentoring students

Job Requirements:

• Ph.D. in Material Science, Engineering, Robotics, Sensors, or a closely related field
• Strong background in formulations for 3D printing
• Experience in soft robotics applications
• Proficiency in CAD software and 3D printing technologies
• Strong programming skills (e.g., Python, C++, MATLAB)
• Excellent written and verbal communication skills
• Ability to work independently and as part of a team
• Experience with machine learning and AI applications in engineering is advantageous

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Salary: $2500-$2800+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Salary: $2400-$2800+allowances+OT=>$3300

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities:

Design & Details of Civil Structural Engineering Works

So-Ordination with clients' Representatives, Project Managers, Consultant Team and architech from inception to completion of projects.

Attend meetings during course of construction of projects

Responsible for timely submission of reports and completion of projects for tender/submission with target dates.

Responsible for on-site technical/engineering /administrative matters.

To provide all relevant endorsements required by the relevant authorities.

Supervise all civil, structural and geotechnical building works both permanent and temporary.

To ensure that contractor had obtained all necessary permits and clearance to work.

To conduct site inspection and ensure that contractor(s) implejment corrective actions and timely preventive/mitigation measures to protect surrounding structures.

To cooridnate with contractor,AC,QP(D), relevant agencies, including interfacing contractors and consultants etc. for the works.

To review, evaluate and assess all fromwork structure, formwork support systems of RC structures and submit evaluation report endorsed by a PE.

To review and supervise safety, environmental and health matters.

To supervise the installation of instrumentation.

To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations.

to review Contractor's design and supervise all works associated to underground works below 6m.

Requirements:

Degree in Civil & Structural Engineering

Qualified candidates please submit in your updated resume in MS Word format with your latest RTO cert or RE cert attached.

At least 4 years' of experience, of which 3 years' experience in substructure & superstructure works or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

Possess a valid RTO or RE by JAC of IES/ACES as QSS Singapore.

Possess BCSS and d/or confined space certificate.

Should be willing to work 56hours/weeks

Candidate to be able to work shift workds due to the demands of the project.

Candidate expected to work in a team those who possess team work spirit is welcom to join.

Centre for Urban Solutions is a research centre in innovative solutions and technologies for urban centres and built environment. The key objective is to support efforts to provide leadership in research and development in innovative solutions for sustainable living and infrastructures for future cities.

The Coastal Protection and Flood Management Research Programme (CFRP) aims to advance knowledge in coastal and flood resilience and spur the growth of a vibrant research and development ecosystem for coastal and flood resilience in Singapore.

The (CFRP) research framework consists of four vertical programmes in which applied research is conducted to generate new knowledge and develop novel, effective, smart solutions for coastal protection and flood management. The framework has three horizontal programmes of broad outcomes that inform and support the verticals. The CFRP will develop innovative multi-functional coastal protection and flood management solutions and will: Catalyse the growth of a local R&D ecosystem to support long-term national agenda; Drive the development and application of effective and smart solutions; Facilitate translation and commercialisation of solutions.

As part of this programme, Vertical 1 Innovative Engineering Solutions, Project 4: Eco-cement enhanced methods for beach erosion control and beach land restoration through soil accumulation in Singapore, will explore eco-friendly and sustainable solutions for coastal protection and land reclamation over beach land inundated by sea level rise.

We are looking for a Research Fellow, based in School of Civil and Environmental Engineering (CEE), to work effectively for advancing the engineering solutions to develop a new Eco-cement enhanced method to form a barrier for coastal protection and land restoration for Singapore and beyond. The role will focus on performing independent and collaborative research to meet the project objectives, developing new solutions, and publishing high-quality journal papers to promote the international reputation of the Centre and the University.

Key Responsibilities:

• Conduct in-depth research on advanced environmentally friendly materials suitable for coastal barrier design and construction, considering durability, environmental impact, and cost-effectiveness.
• Design and oversee laboratory experiments with research team to test the performance and durability of materials under simulated coastal environmental conditions.
• Perform numerical study of the model test. Analyze and interpret data to make informed recommendations for costal protection system design and optimization
• Writing and publication of results in peer-reviewed journals
• Assist in securing external funding through grant applications and proposals

Job Requirements:

• PhD in Coastal Engineering, Biogeotechnical Engineering, Civil Engineering or related discipline
• At least 1-year research experience in related areas.
• Strong background in materials testing, analysis, and selection.
• Experience in ground improvement, geotechnical foundation design, finite element analysis.
• Excellent analytical and problem-solving skills.
• Ability to work collaboratively in a multidisciplinary team.
• Publication track record is an advantage
• Good written and oral communication skills in English - essential for data analysis and communication with stakeholders

Interested applicants are invited to submit a cover letter/full CV/ statement of research interests in one document. Enquiries about this position can be made to Dr. WU Shifan ([email protected]).

We regret to inform that only shortlisted candidates will be notified.

Job Responsibilities

• Act as the primary point of contact for all matters related to the E-house components of the FPSO project. Coordinate with engineering interdisciplinary teams, contractors, and stakeholders to ensure seamless integration of E-house systems.
• Be the first point of contact for any E-house related engineering issue.
• Lead a team of engineers, topside design contractor, and E-house module EPC contractors to conduct engineering design, support the integration, construction, and commissioning activities until project delivery.
• Review and approve design specifications for E-houses, ensuring they meet project requirements and industry standards. Collaborate with project stakeholders to address any design issues or modifications.
• Oversee the engineering design, construction and assembly of E-houses, ensuring adherence to project timelines, specification requirements, budget constraints, and quality standards. Conduct regular site inspections and progress meetings to monitor work and resolve any issues.
• Attend FATs, and any oversea technical clarification meetings as required.
• Involve in technical discussions and technical review for electrical studies.
• Implement and monitor quality control processes to ensure the E-house systems are built to specification. Conduct design review, technical clarification meetings, and validation of E-house system design.
• Work with E-house contractor and topside design houses to maintain accurate and comprehensive documentation related to E-house engineering design.
• Prepare and present reports on project status, issues, and achievements.
• Identify and resolve any technical, or project management issues that arise during the E-house design, construction and commissioning phases. Implement corrective actions as needed.

Job Requirements

• Minimum Bachelor’s degree in Electrical Engineering is mandatory. Mechanical Engineering, or a related field, or any advanced certifications (e.g. PMP) or degrees are a plus.
• Minimum of 8 years of experience in engineering coordination, with a focus on electrical systems and E-houses, preferably in FPSO or offshore projects.
• Strong knowledge of E-house design, construction, and commissioning. Proficiency in project management software and tools. Excellent communication, leadership, and problem-solving skills.
• Ability to work in a fast-paced environment and adapt to changing project requirements. Willingness to travel to project sites as needed.

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

1. To coordinate with Head office and customers for all sales & service-related matters.

2.To handle the following sales activities:

• Clarification of queries from customers, if needed
• Prepare price proposal to customers / conduct price negotiation when needed.
• Prepare Purchase order to Tokyo office / Generate sales order.
• Follow up delivery.
• Coordinate & arrange shipment.
• Generate Invoice / prepare delivery order (if applicable)
• Follow up payment schedule.

3. Other non-standard works such as assisting in applying Export License, Issuance of BG, submission of documents for LC payment etc.

4. Assist in traveling arrangement for sales staff / supervisors

• Flight arrangement
• Hotel-rooms reservation
• Airport Pickup and transport arrangement

5. General administrative works (such as filing, BizSafe activity, etc.)

Requirements

• Diploma (in any discipline), or higher.
• At least 5 years’ work experience in export and import goods handling by sea and air shipment (Experience working in import/export departments of machinery manufacturers or machinery trading companies preferred)

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Associate. The selected candidate will innovate technologies on metalens and other related devices and products.

Key Responsibilities:

• Development of microfabrication process for metalens and related devices using cleanroom facilities,
• Working in cleanroom environment and usage of facilities such as SEM, EBL, etc.
• Characterization of metalens and related devices
• Project planning and progress reporting

Job Requirements:

• Masters degree in relevant Engineering or Science discipline.
• At least 3 years of working experience in microfabrication (processing).
• Familiarity with cleanroom facilities and processing
• Basic knowledge on device characterization
• Good interpersonal skills with ability to work independently and also in a team environment.

We regret that only shortlisted candidates will be notified.

Create detailed technical drawings and plans for civil engineering projects. Work closely with engineers and surveyors to ensure accuracy and consistency in project plans. Use CAD software to produce 2D and 3D drawings. Review and modify drawings as required to meet project specifications and standards.

Main scope: -

• Handle general clients’ enquiries, quotations, order processing, and fulfillment
• Accounts Payable ( Invoices and Payments )
• Updating of suppliers/ vendors list
• In-charge in office administration work for Finance / Operation / HR department
• Workers injured insurance claim
• Follow up on company vehicles for inspection/Road Tax/Vehicle Insurance
• Handle in maintaining of workers timesheets to process and manage monthly payroll
• Documents controlling and filing
• Perform any ad hoc assignments as and when required

Secondary scope: -

• Sort and process staff claims
• Perform any ad hoc assignments as and when required

You are assisting the in-house IT Engineer in managing and resolving the day-to-day IT requests from employees. These tasks may include, but are not limited to the responsibilities as follow:

Responsibilities:

· Installing and configuring computer hardware, software, systems, networks, printers and scanners.

· Maintain and monitor the list of e-mail address in the company.

· Create login credential and the access rights to the new employees and deactivate all the access when employees leave the company.

· Ensure the security of data, network access and backup systems are kept up to date.

· Providing technical support across the company, including repairing and replacing equipment when necessary.

· Manage and update IT infrastructure list for the whole company.

· Raise Purchase requisition by identifying and selecting the appropriate equipment that align with the requirements of management.

· Support overseas office user from remote connection.

· Any other ad-hoc duties as assigned by IT lead/Management.

Requirements:

· Only Singaporeans may apply

· Part-timers are welcome

· Diploma or Degree holder with 2-3 years of relevant working experience.

· Extensive knowledge of computer hardware systems

· Familiarity with general OS systems, Enterprise, programming languages, and Office software

· Knowledge of LAN and wireless networks

· Good communication skills

· Ability to troubleshoot complex software and hardware issues

· Knowledge of database and networking security systems

• Cost Planning and Preparing Feasibility Studies
• Prepare Preliminary Cost Estimate Prior to Construction
• Advice on Appropriate Procurement Strategies
• Taking-off Measurements & Prepare Bills of Quantities
• Evaluate Tenders and Tender Negotiations
• Monitoring Project Budget and Cash Flow
• Certification of Payment Invoices/Interim Payment Certification

Job Requirements

• Leading a Team of Tankage Design Engineers to execute the Tankage Design Engineering of the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650, Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII & Cryogenic Double Wall Tanks as per API 620 & API 625.
• Review & Checking of Tankage Design Documents such as Design Calculation for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification, Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME Sec VIII, AP 2000 and all Applicable Codes & Standards.
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies.
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay / approvals / resolution of open issues.
• Review and ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Coordination with PMC and Construction Coordination.
• Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works.
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Preparation of Technical Specification for Works and Technical Bid Evaluation
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Preparation of Foundation Loading Data.
• Generate 2D construction drawings and data sheet.
• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system, aluminium dome roof & etc. Preparing technical bid evaluation for item purchased. Checking vendor’s calculation & construction drawings.
• Checking of construction drawings. Preparation of bill of material for purchasing.
• Preparation of technical queries to client base on design deviation.
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Minimum 15 years of experience

Software Requirements

1) Autocad

2) Good proficiency in MS Excel, MS word

Code Knowledge

1) API 650/ API 620

2) ASME Section VIII D1 & D2

3) ASME Section II Part A & D

4) ASTM

5) NFPA

• Assisting in the recruitment and onboarding of new hires
• Ensuring compliance with safety and professional standards within a facility
• Organizing, monitoring, and prioritizing tasks to meet production goals
• Evaluating various stations of the production operation to ensure optimum efficiency
• Maintaining communication between employees and senior executives to ensure procedures and policies are well-understood
• Ensuring the flow of raw materials and other resources.
• Supervising operations within a facility to achieve higher output.