• Handle sustainable energy projects & determine the right technologies for a particular application to meet the requirement of clients. Sustainable energy projects such as PV, BESS & EV Charging System
• Evaluate & propose alternative solution & system integration for the overall project plan
• Ensure system compliance with regulatory bodies & standards such as SCDF, BCA, EMA, etc
• Knowledge of relevant IEC & UL standards
• Manage project scope, cost, schedule & quality of work from site preparation stage till project completion & handover to clients
• Work with agencies, clients & contractors on any technical issues
• Ensure work is carried out according to approved plans, quality standard procedure, safety requirements & in a timely manner
• Provide regular progress update reports
• Perform planning, scheduling & implementing project maintenance works
• Carry out troubleshooting, test, repair & installation works as & when required
• Planning, cost control, work measurement & collection of performance data
• Ad-hoc matters as assigned by the Project Manager which is necessary for the execution of the project
• Ensure project technical issues are monitored, resolved & escalated where appropriate

Job Requirement:

• Degree or Bachelor in Engineering (Power / Electrical / Clean Energy or related discipline preferred)
• At least 4 years in PV system design & engineering and project management
• Knowledge of codes such as the IEC, Singapore Standards and construction practices
• Working knowledge of standard electrical calculations, basic structural & mechanical calculation
• Competence in AutoCAD is a must
• Well versed in Microsoft Office (Word, Excel, Powerpoint)
• Good documentation & report writing skills
• Must be able to apply new technologies such as ESS, EV Charging etc
• Able to work independently and able to lead a team
• Knowledge of PVsyst
• Able to communicate with Chinese speaking customers and contractors

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Assist the workshop manager to oversee, coordinate & prioritize all service work performed in the workshop, including:-

• Servicing, repairs, diagnostic and testing of motors, transformer & generators as well as welding, sand blasting and painting
• Assist in managing day to day operations, trouble shooting decisions and actions
• Monitor ongoing time-and-material costs for each job
• Provide technical support for customers when necessary, including confirming technical or engineering modifications & ensuring service satisfaction
• Observe and ensure all service personnel comply with all safety procedures and use proper protective gear
• Provide support to service personnel & ensure compliance to Risk Assessment as outlined and commitment to all OH&S activities
• Ensure that testing/diagnostic activities are conducted in a safe manner
• Ensure that service personnel are well trained to perform their tasks and including the safe use of any equipment
• Coordinate the repair and maintenance of all workshop equipment
• Carry out disciplinary actions for non-compliance in accordance with company policy

Requirements

• Possess Degree in Electrical/Mechanical Engineering
• 5 years of relevant experience in marine or oil/gas industry and those with servicing experience of motor or transformer or generator or supervising mechanical work will be an added advantage
• Effective interpersonal/communication/presentation skills
• Independent, good team player, leadership and result oriented
• IT savvy
• Require to travelling when needed
• Possess own vehicle

• Modification, testing and commissioning of main switchbords (MV, LV), MCCs & control panels
• Repair, test and prepare of report for circuit breakers (GE Power Break, Merlin Gerlin, Schneider & ABB)
• Design, install, test and fabricate of starters and control panels
• Generators protective relay testing (Basler, GE, Deif)
• Current Transformer Testing
• Surge test, Hi-pot & Polarity Index Test, function test and load test for generators, motors & transformers
• Repair and troubleshoot for AVR and Main Switchboard Control System
• Design, test and commission of generator, protective relay, synchronization, load sharing, parallel operation of generators, main switchboard function test for survey approval
• Design and fabricate of variable AC or DC Speed Drives Control Systems
• Design, troubleshoot, install and commission of AC drives up to 690V, 1000KW
• Troubleshoot, install and commission of drilling SCR System and AC generator control system

Requirement

• Diploma/Degree in Electrical/Power/Marine/Industrial Engineering or equivalent
• 5 years of experience
• Offshore electrical Installation and instrumentation experience preferred
• Experience in marine equipment control and systems integration preferred
• Experience in testing and commissioning of switchboards, power management, transformer and other electrical equipment preferred
• Competency in automation design of control system (Hardware & Software) for VFD drive, PLC system, HMI system utility power system
• Knowledge of AC/DC motors, computer-based system and generator
• Able to travel overseas onboard vessels when required

Job Description

- Dismantling of goods and materials.

- Sorting of goods and materials.

- Receive incoming goods and materials.

- Prepare outgoing goods and materials.

- Ensure cleanliness and tidiness of premises.

- Assist in delivery / collection / warehousing duties when required.

- Other job tasks when allocated by supervisor

- Assist in the installation, maintenance, and repair of machinery.

- Operate tools in order to aid in the manufacturing process.

- Perform periodic checks on equipment and solve problems as detected.

- Work with others in order to ensure that equipment is in proper working order.

- Observe and follow company safety rules and regulations.

Requirements

- Able to handle heavy loads ( up to 25kg per item ).

- Able to work in non-air-conditioned environment.

- Able to operate material handling equipment ( i.e. Forklift )

- Positive working attitude, hardworking and able to work independently

- Able to communicate in basic English

- Experience in metal works ( i.e. welding ) will be advantage.

Interested candidate, please send your resume to Email : [email protected]

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

• Assist in planning and managing resources effectively to achieve objectives.
• Support accurate tracking of project costs to meet budget targets.
• Develop and manage detailed project schedules and work plans.
• Ensure contractual obligations are fulfilled with customers during project execution.
• Manage quality control and health and safety activities during project execution.
• Provide regular project updates to stakeholders on financial status, execution strategy, adjustments, and progress.
• Maintain relationships with customers and vendors, including regular site visits and oversight during work execution.
• Participate in discussions about project/service strategy development and deployment.

• Assist in planning and managing resources effectively to achieve objectives.
• Support accurate tracking of project costs to meet budget targets.
• Develop and manage detailed project schedules and work plans.
• Ensure contractual obligations are fulfilled with customers during project execution.
• Manage quality control and health and safety activities during project execution.
• Provide regular project updates to stakeholders on financial status, execution strategy, adjustments, and progress.
• Maintain relationships with customers and vendors, including regular site visits and oversight during work execution.
• Participate in discussions about project/service strategy development and deployment.

• Preparing and following a general maintenance schedule.
• Advising managers on cost-effective ways to perform maintenance and repairs.
• Keeping a maintenance record and filing documents, invoices, and instruction manuals.
• Keeping an inventory of maintenance tools, materials, and parts.
• Reporting urgent maintenance and repair tasks to management for approval.
• Proactively performing structural maintenance and keeping grounds neat.
• Diagnosing equipment malfunctions and performing repairs.
• Obtaining approval for purchasing maintenance tools, materials, or replacement parts.
• Supervising the maintenance team.
• Following prescribed safety regulations at all times.

Human Resources Admin Support:

· To assist maintaining personnel records, updates databases, and creates guidelines and FAQ documents about company policies.

· Publish job ads, schedule interviews, and prepare HR-related reports, when needed.

· Respond to employee inquiries about benefits.

General Administration

· Provide efficient administrative support to the entire office, including scheduling meetings, travel arrangements, and expense management.

· Manage office logistics and facilities, ensuring a comfortable and productive work environment.

· Oversee office supplies and procurement.

· Maintain accurate records and documentation for all administrative tasks.

Accounts Administration Support

· Handle daily accounts payable and receivable activities.

· Process invoices and payments.

· Prepare financial reports for management.

· Knowledge in GST/CPF/Levy and government taxes

· Assist with budgeting and forecasting.

· Maintain compliance with accounting regulations.

· Perform full set of Accounting: Balance Sheet, P & L, cash flow, etc.

Qualifications

· Dip/Adv Dip or degree in business administration, Human Resources, Accounting

· Minimum 5 years of experience in a similar role (preferably within the consulting or training industry).

· Strong organizational and time-management skills.

· Excellent communication, interpersonal, and customer service skills.

· Proficiency in Microsoft Office, HR software and accounting software like SQL, Xero, Quickbooks or SAP is an advantage

· Ability to work independently and as part of a team.

· Attention to detail and accuracy are essential.

· Willing to work in Jurong Area

Benefits

· Competitive salary and benefits package.

· Dynamic and collaborative work environment.

· Continuous learning and development opportunities.

· The chance to make a real impact on the success of the company.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

• Preparing and following a general maintenance schedule.
• Advising managers on cost-effective ways to perform maintenance and repairs.
• Keeping a maintenance record and filing documents, invoices, and instruction manuals.
• Keeping an inventory of maintenance tools, materials, and parts.
• Reporting urgent maintenance and repair tasks to management for approval.
• Proactively performing structural maintenance and keeping grounds neat.
• Diagnosing equipment malfunctions and performing repairs.
• Obtaining approval for purchasing maintenance tools, materials, or replacement parts.
• Supervising the maintenance team.
• Following prescribed safety regulations at all times.

• Responsibility for and performance of general maintenance tasks such as carpentry, plumbing, painting and interior finishes/fixtures (lighting, carpeting, walls, ceilings, doors) related to the general maintenance and aesthetics of the building, including but not limited to, work generated from Preventative Maintenance system, Work Order system, and Unscheduled Maintenance system (Corrective Maintenance)
• Carry out first line maintenance of a range building engineering services plant and equipment
• Administer the permit to work system
• Carry out emergency repairs so as to ensure the continued operation of all plant and equipment
• Complete a daily log report on activities within the section
• Operate the building management system and adjust as required to ensure an energy efficient operation
• Carry out other infrastructure or building repairs so as to ensure continued operation
• To utilise Preventative Planned Maintenance software to monitor plant performance and identify fault incident’s

• Responsibility for and performance of general maintenance tasks such as carpentry, plumbing, painting and interior finishes/fixtures (lighting, carpeting, walls, ceilings, doors) related to the general maintenance and aesthetics of the building, including but not limited to, work generated from Preventative Maintenance system, Work Order system, and Unscheduled Maintenance system (Corrective Maintenance)
• Carry out first line maintenance of a range building engineering services plant and equipment
• Administer the permit to work system
• Carry out emergency repairs so as to ensure the continued operation of all plant and equipment
• Complete a daily log report on activities within the section
• Operate the building management system and adjust as required to ensure an energy efficient operation
• Carry out other infrastructure or building repairs so as to ensure continued operation
• To utilise Preventative Planned Maintenance software to monitor plant performance and identify fault incident’s

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Job Description & Requirements

1. Clean designated facility areas (dusting, sweeping, vacuuming, mopping etc.)

2. Clearing of waste and rubbish bags to garbage area.

3. Perform and document routine inspection and maintenance activities.

4. Notify Superior of deficiencies or needs for repairs.

5. Perform minor repairs.

6. Maintain sufficient cleaning materials and supply.

7. To provide and maintain all designated working areas, house-keeping -5S and ensure all general cleaning practices are in accordance to A & One Precision best practices and other practices which the Company may introduce from time to time.

8. To maintain good workplace health and safety rules and regulations compliances at all time in store/workplace.

Education level:

Min. Primary education.

Experience level:

1. Two (2) years in relevant experience in cleaning Factory environment.

Result oriented, resourceful and independent with minimum supervision.

Responsibilities:

1. To assist/ in-charge in HR activities/duties covering recruitment & selection, staff administration process on all leaves (MC, AL, NPL, etc.), work permit/pass admin etc. include new hire orientation and resignation clearance.
2. To assist in coordinating all leaves applications approval from Tuas HOD, training and development programs (if any) to submitting to HQ for record compliance to HQ practice.
3. To involve and in charge all administrative data up-date in production, purchase input collaboration duties, secretarial matter and work etc at Tuas both plants inclusive of Navision system promptly.
4. In-charge with all staff requisition and coordination on staff uniform, office stationeries, medical check, training aspect etc and be involved in periodical ISO and customer audit and any Tuas Management/Superior as and when ad-hoc duties.
5. Assist Safety Officer as and when required.
6. To assist to ensure all HQ and Tuas HR and production administration documentation recording and updating from time to time.
7. To co-ordinate and have human relation working attitude with HR team and others department pro-actively and team-work at all-time meeting targets and timely update/delivery.
8. To develop continuous HR improvement and etc.
9. To assist to provide in following up good communication and even secretarial support to staff, HOD, superior for continuously improvement.
10. To assist and ensure all HR and production administration and support on all relevant update and proper quality, quantities performance at all time.

Requirement:

1. ITE graduate in Human resource or its relevant with computer literacy (Microsoft office & excel).
2. Min. three (3) years in relevant experience in relevant field and in mfg. environment.
3. Proficient in payroll systems.
4. Good knowledge in HR local compliance & Regulation.
5. Good mind-set, have a can do attitude and meticulous analysis.

WORK EXPERIENCE

·
Operated and set up CNC machines to produce precision parts.

· Interpreted technical blueprints and designs to understand the specifications and requirements of a part.

· Programmed the CNC machine, inputting the design specifications and ensuring the machine performs as required.

· Conducted regular maintenance and troubleshooting on CNC machines, ensuring they operate smoothly and efficiently.

· Measured and examined completed parts to verify conformance to specifications using precision tools like micrometers,height gauges and calipers.

· Selected, cutting tools, and materials onto machines.

· Adjusted machine settings to optimize production while maintaining quality.

· Kept a detailed record of processes, tool usage, and production output.

· Adhered to safety protocols and procedures to ensure a safe working environment.

· Collaborated with engineers or designers for custom jobs or to refine manufacturing processes.

REQUIRMENT

· High school diploma or equivalent.

· Hands on experience on CNC Faunc Control(turning).

· Programming and setting must know.

· Able to do all kinds of threading (ACME,STUB ACME etc…).

· Oil and gas job experience must.

· Technical training in CNC machining or a related field.

Responsibilies:

1. Provide Technical support and update customers on project development timely.
2. Communicate and coordinate with customers and relevant parties pertaining to technical requirements and engineering aspect of the assigned projects.
3. Plan, monitor and control all assigned projects are delivered within the given schedule.
4. Work with inter-departments to ensure commited schedules are met.
5. Assist to prepare and compile contractual quotation for existing and new products as per customers' enquires.
6. Prepare and release job orders/purchase requisition to various departments.
7. Prepare and generate shipment documents for delivery.
8. Provide regular updates on project development timely.

Requirement:

• Minimum NITEC in Mechanical Engineering or related.
• 2 years of relevant experience
• Able to interpret technical drawing and computer literate.
• Must be result oriented, resourceful and independent.

Job Description & Requirements

1. Formulate business planning, management strategy program in optimizing current and potential market opportunities and business performance.
2. Lead and oversee a team of Sales Engineers in achieving sales target and goals.
3. Resourceful in developing new customer's base and secure improving sales target on existing customers.
4. Analyze Profit / Loss of projects and providing cost control and cost effectiveness strategy.
5. Ensure effective control of resources in providing quality / cost efficiency and on time delivery service for customers.
6. Respond to customers' enquiries, follow-up and provide technical solutions to clients.
7. Compiling and review contractual quotation for existing and new products as per customer's enquiries.
8. Provide regular update to customers on project development in a timely manner.
9. Prepare monthly sales input / output and making use of data to make sound analysis and decision.
10. Initiate and develop good customer service and rapport with customer and always ready to serve customer better.
11. Perform risk assessment for all new enquiries.
12. Ensure compliance with any applicable regulatory requirements as defined by customer.
13. Manage the configuration management including subsequent engineering change.
14. Oversee the control of documents/drawings.
15. Participate in the implementation of risk assessment and risk control of medical devices.

• Preferred to have Diploma in mechanical / precision engineering field or equivalent.
• At least 5 years of working experience in Sales position in the precision engineering inductry and with proven track record of sales performance.
• Good presentation skills.
• Self-starter and result orientated.
• Able to work independently and deal with organizations that is diverse in size ownership, sophisticated and cultural point of view.
• Outgoing, charismatic personality and good social skills.
• Must possess class 3 driving license and own vehicle.

Job Description:

- Assist Engineering Dept and Plant, plan and execute development activities at plants to meet the required schedule and quality

- Work closely with stakeholders to ensure smooth transition from development to production

- Actively explore modernisation of the plants’ production processes/ facilities so as to fine-tune, optimise and streamline production operations to achieve throughput and quality, while reducing manpower requirement

- Develop technical drawings and work with production to develop process drawings.

- Design tooling and gauges during product development phase.

Job Requirements:

- Degree in Mechanical, Mechatronics, Electrical/Electronic, Aerospace Engineering

- Experience in managing production operations

- Comfortable to work with energetics, prior experience working with energetics-related products is a plus

- Team player, independent, self-motivated and ability to work under stress

Job Description:

- Provide great customer service by assisting customers with product selection and answering queries

- Provide product demonstrations and educate customers on the features and benefits of our products

- Assist in store operations such as generating quotations/invoices, arranging delivery schedule, maintaining showroom tidiness

- Assist in online e-commerce operations such as processing online orders, monitoring and responding to customer inquiries and reviews

- Build and maintain relationships with customers to promote business sustainability

- Meet monthly sales goals by providing customer service and product knowledge

- Perform other ad-hoc duties

1. Provides administrative support to the Department in implementing and administration of the Company’s HR policies (Recruitment & Selection, Compensation & Benefits, Performance Management, Learning & Development, Talent Management, and Manpower Planning).

2. Assists in preparing Employment Contracts for HR Manager’s approval before submitting to MD’s / GM’s signature.

3. Administers and processes foreign workers’ immigration matters, Work Permit, S Pass and Employment Pass application, renewal and cancellation, foreign workers’ insurance matters, home leave, etc.

4. Assists in the administration of Work Injuries Compensation Act and Retirement and Re-employment Act.

5. Provides administrative assistance in the implementation of Company’s HR policies so that overtime, work on rest days and public holidays are properly implemented.

6. Monitors the utilization and administration of employee benefits e.g. medical, leave, staff insurance and highlights discrepancies to HR Officer / HR Manager for corrective actions.

7. Assists HR Officer in the research to update the Employee Handbook so that it reflects changes in policies government and Company policies.

8. Assists HR Officer to carry out regular research on changes in MOM advisories on employment matters and updates HR Manager, HODs and Directors.

9. Assists in maintaining and updating employees’ personnel files accurately.

The Project Engineer is responsible for the day-to-day supervision of projects and installation activities. He is responsible to ensure that designs and equipment are organized in a timely manner to ensure customer / end-user requirements are met. He shall also manage and control costs on the projects to maximize margins under his charge. He shall monitor the progress and ensure customer billings are done at various agreed milestones and when the project is complete.

He will also need to liaise closely with the other sales teams, purchaser, warehouse supervisor and project admin coordinator on material procurement and delivery.

Roles & Responsibilities

Establish and maintain contacts with existing and new customers

To prepare vendor document submission

To prepare project costing

Coordinate delivery schedules with suppliers / manufacturers.

Liaise with EPC’s engineer for inspection / attend progress / technical meeting with EPC/ client representative.

Carry out inspection checks for the equipment according to the project requirements / supervise fabrication work by fabricators.

Attend and supervise FAT (Factory Acceptance Test) in workshop for Firefighting system.

Prepare final documentation.

Able to travel for overseas for testing & commissioning work at client’s yard.

Meet regularly with other staff to develop strategies to improve productivity and increase margins

Maintain up-to-date computer database of customers, projects and progress/status

Performs any other duties as required by the New Business Unit Manager

Requirements

Min 3 to 5 years’ experience in firefighting system, lifesaving appliances and rescue & safety equipment

Min Diploma in mechanical / marine offshore engineering

Knowledge and hands on of AutoCAD software for 2D & 3D drawings

Outgoing personality

Interpersonal and negotiating skills

Computer literacy

Good written and verbal communication skills

Self-presentation

Independent and self-motivated