As Sr/Engineer for PDE Technology Development Process Integration, you will be responsible for developing advanced packaging process solution and ensure New Process, New Equipment, New Material and Path finding activities success for NAND, mNAND and DRAM, Controller in Micron. To lead new Technode process readiness and improving the yield, quality and reliability with process characterization and optimization and new materials, machines & technologies introduction. You will need to have understanding of Frontend Process, packaging requirements, chip/package interaction, equipment capability and process technology in the industry and the ability to enable best technology for New Technode & Product Introduction with assembly packaging requirements. You will also be required to drive & collaborate with multi-functional teams to resolve assembly process related problems.

Key Responsibilities

Ensure smooth transition from new process development, 1st qualification success to small volume production launch

• Development and Qualification of new packaging process, material, equipment and technology solutions to meet new Technode (NPI) requirements and schedule
• Perform process TRA, risk mitigation execution and process recipe readiness prior Silicon arrives and ensure 1st pass rate.
• Lead/partner with cross function team/site, to ensure successful transfer to CEM for LVM.
• Qualify new process/technology/equipment/materials
  Implement PDE TD PMI (Product Maturity Index) methodology & provide proper Documentation for product transfer CEM & HVM

Identify path finding opportunities for continuous yield improvement and cost reduction activities

• To understand and be able to integrate process knowledge between upstream and downstream across Si and assembly/packaging process
• Understand the future trend, technology and capabilities required for future packaging solutions, work with teams to put in place new capabilities to enhance process performance.

Provide new solutions on time to meet company and customer needs

• Define, develop and establish process capabilities, strategy and roadmap
  To develop & engage creative solutions for new capabilities or to overcome the identified process constraints, ahead product requirements.

Job Requirements:

• PhD/Masters/Bachelor’s in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• At least 2 years' experience in semiconductor industry
• Experience in Frontend fab Process integration or Module process with technical knowledge on wafer and die level process technology
• Understanding of Micron’s silicon and how it interacts at backend process & package level through CPI is a plus
• Strong project management skills to ensure execution to timelines
• Strong communication and presentation skills
• Understanding of business needs and customers’ requirement
• Ability to integrate & partner with people from cross function teams

Keen on the role? Apply now!

Summary

We are looking for an enthusiastic and skilled AI Researcher to join our dynamic research team. The ideal candidate should have a strong foundation in artificial intelligence and machine learning, coupled with the passion to innovate and improve the capabilities of existing solutions. You will work on cutting-edge research projects, develop new algorithms, and contribute to the advancement of our AI initiatives, via both independent and collaborative research efforts. The role involves leveraging AI/ML algorithm framework, such as TensorFlow and PyTorch, to develop cutting-edge generative AI/ML solutions. Responsibilities include designing and conducting scientific experiments, utilizing core AI/ML knowledge to develop novel AI solutions in cloud or on-premises environments. The candidate will also be expected to collaborate with the team, participate in code reviews, architecture discussions, and create comprehensive documentation. The ideal candidate should possess a strong foundation in statistical analysis, machine learning, deep learning, generative AI, and text representation techniques. Additionally, the candidate should also have excellent communication skills, a strong work ethic, and a passion for delivering highquality, innovative solutions.

Responsibilities:

• Conduct novel and cutting-edge research in AI and machine learning. Research areas include but are not limited to computer vision (CV), natural language processing (NLP), automatic speech recognition (ASR), etc.
• Design, implement, and optimize algorithms and models for various applications employing supervised, self-supervised, semi-supervised, or unsupervised learning.
• Collaborate with our partners and engineers to apply research findings to real-world problems and product development.
• Communicating regularly with supervisor and Research leads on scientifical progress, insight and research direction.
• While publishing research papers in reputable journals and conferences is valued, it is not a strict requirement for this role.
• Contribute to other program-related projects.
• Collaborate with engineering team to translate researched technology (low TRL) to engineering (high TRL).
• Candidates applying for senior staff positions are expected to mentor and support team members (or cross-team members) in technical advising.
• Adhere to ethical research and coding best practices with timely documentation and updates.

Requirement:

• PhD or Master degree in Computer Science, Computer Engineering, Statistics, Engineering, or related technical field.
• 2-4 years of experience in research and development, specifically in one or more of the following areas:

1. Computer vision.
2. Natural language processing, specifically in large language model (LLM) core component, e.g., joint entity relation, information retrieval, prompt engineering, reasoning, sentiment analysis, guardrail, etc....
3. Generative AI, specifically in generating synthetic data.
4. Audio analytics.
5. Large vision language model (LVLM),
6. Embodied AI.

• Proficiency in programming languages such as Python and/or C/C++. Experience with deep learning frameworks like TensorFlow, Keras, and/ or PyTorch.
• Demonstrate an analytical mindset with adept problem-solving skills.
• Stay abreast of the latest research developments in AI through literature review, attending conferences, and tech-sharing sessions with fellow team members.
• Exhibit a strong drive to deliver optimal solutions within tight timelines.
• Excellent analytical, critical thinking, and problem-solving skills.
• Strong communication and organizational skills. Mentoring experience and skills are a plus.
• Comprehensive documentation of technical specifications, architectural designs, and best practices.

Requirements: Minimum 3 years experience in installation ACMV system and installation of ducting, fresh-air fan, exhaust fan, commercial Kitchen hood including control panel. Knowledge of electrical control circuit and should be very hard working

Job Description

You will help to design and develop Guidance, Navigation and Control (GNC) systems and algorithms for our drone systems and be part of a tight-knit team that provides safe, reliable drone systems and quality services to our distinguished customers in Singapore and around the region.

Your responsibilities will include:
• Design, develop and modify guidance, navigation, and flight control systems and algorithms for our unmanned aircraft systems.
• Develop and modify 6-DOF and hardware-in-the-loop (HIL) simulation environments. • Select, test, evaluate and integrate new sensors or navigation systems onto our drone systems.
• Write, modify, and test firmware and flight code that runs on the flight control computers of our drone systems (in C or C++).
• Analyze flight data to verify flight performance and to help to troubleshoot issues that are found during the flights of our drone systems.
• Generate documentation on the specifications, design, test procedures and test results of the GNC systems and algorithms that were developed.
• Participate in design and code reviews.
• Support ground and flight test activities.
• Work in a collaborative manner with staff in other engineering (e.g. system, software, safety, flight test, etc.) and business groups.

Requirements

• Bachelor’s/ Master’s Degree in Mechanical, Electrical, Aerospace, Controls, Mechatronics Engineering, or a field related to GNC.
• Good to have 3+ years of industry or other relevant experience in GNC
• Strong background in system modelling, system identification, parameter estimation, frequency response analysis, classical and modern control theory.
• Experience in system modelling and control, analysis, and simulation in aircraft applications.

• Experience in developing model-based design and analyses using MATLAB/Simulink.
• Knowledge in inertial and other type of sensors for navigation (e.g. accelerometers, gyroscopes, magnetometers, GNSS receivers, pressure sensors, ranging sensors, etc.)
• Knowledge in Kalman filtering, digital signal processing and sensor data fusion.
• Proficient in C/C++ programming language.
• Proficient in software and development tools such as Linux, ROS and Git.

General Admin Responsibilities:

• Answering incoming phone calls and attending to visitors
• Handling general admin duties including replenishments of stationery and office supplies, tools and equipment loans and calibrations, documentation control & etc
• Issuance of purchase orders and draft contract

HR Admin Responsibilities:

• Handling recruitment and selection activities including arrangement for interviews
• Assist in staff training and development activities
• Keeping, maintaining and updating of personal file / records of employees, job descriptions, increment and renewal of employment contract
• Drafting letters as and when requires

Other Duties as assigned by The Management

• Candidates should possess at least a Diploma in related field
• Minimum 1 years of experience required
• Able to multi task and work independently
• Knowledge in MS Office
• Good working attitude, good communication and interpersonal skills, team work, initiative and good time management

Job Description

• Oversees all general project administration.
• Provide administrative support for project managers and engineers. Preparation of quotations, OMM, Testing and commission report required by project team.
• Capture minutes of meeting accurately and on time.
• Other adhoc duties assigned

Requirement

• Must be able to communicate in bother English and Mandarin
• Good interpersonal with communication & written skills
• Pro-active, well-organized and able to work with minimal supervision
• Proficient in MS Excel/ Powerpoint/ Word

• Must completed Bachelor Degree in Civil engineering or equilant.
• Preparing site reports and completing other site documentation
• Conducting preliminary site inspections of potential construction sites to determine essential tasks
• Developing labor and material cost estimates for a project
• Advising construction team on operational enhancements to lower costs and enhance efficiency
• Ensuring the construction team follows health and safety standards
• Resolving technical difficulties that occur during a construction project
• Connecting and negotiating with clients, subcontractors and other professional staff

• Atleast complted Bechelor of Civl Engineer or equilant.
• Preparing site reports and completing other site documentation
• Conducting preliminary site inspections of potential construction sites to determine essential tasks
• Developing labor and material cost estimates for a project
• Advising construction team on operational enhancements to lower costs and enhance efficiency
• Ensuring the construction team follows health and safety standards
• Resolving technical difficulties that occur during a construction project
• Connecting and negotiating with clients, subcontractors and other professional staff

• Must completed Bachelor Degree in Civil engineering or equilant.
• Preparing site reports and completing other site documentation
• Conducting preliminary site inspections of potential construction sites to determine essential tasks
• Developing labor and material cost estimates for a project
• Advising construction team on operational enhancements to lower costs and enhance efficiency
• Ensuring the construction team follows health and safety standards
• Resolving technical difficulties that occur during a construction project
• Connecting and negotiating with clients, subcontractors and other professional staff

JOB DESCRIPTION

The responsibility of this position is to drive and manage the Keppel submarine cable infrastructure projects which includes the following activities.

• Work with the Joint build partners, customers and internal business/commercial teams and plan for new subsea cable projects through diverse, secure and practical routes that meet all stakeholders needs and where there is a customer demand.
• Convert the business requirements into detailed engineering specifications by evaluating the industry trends, proven state of art technology, cost optimization, future proofing, optimum fiber pair count, etc.
• To evaluate the optimum cable route through desktop study by engaging with relevant vendors, drive Invitation to Tender process by capturing the Cable owners/Joint Build Partners’ requirements, evaluation of bids, adjudication and selection of vendors by forming various metrics of evaluation.
• Development and finalization of supply contract with the subsea cable vendors by close coordination with the Joint build partners, internal legal team and various stakeholders.
• Work with the submarine cable vendors & partners and drive the implementation of the submarine cable system including design, manufacturing and installation activities.
• Collaborate with the landing service providers, vendors, partners and various internal teams and ensure that the purchasers’ deliverable items (say permits, cable landing station, fronthaul route, wayleave/lease for the land, etc.) are made ready on or before the target timelines, which also includes the formulation and execution of agreements from the technical aspects.
• Work closely with the customers, partners and suppliers on project implementation activities like site survey, design/build of CLS, installation, testing and commissioning of submarine cable and terminal equipment and follow up regularly to get all activities completed on time.
• Ensure that the customers obtain their relevant statutory permits in their respective countries for initial installation with regular follow-up and providing necessary support to them as well as coordination with the supplier.
• Ownership and management of the customer experience and relationship management;
• This position serves as a subject matter expert and a point of contact for the customers and partners on the implementation of the subsea cable cable projects.
• Conduct periodic review meetings with partners/customers/stakeholders and various vendors/providers to discuss about performance, issues and related action items.
• Travel may be required within the region or other regions to assist at various sites. Must have good communications skills.
• Project and Operations activities can often require after-hours coordinated activity and/or unplanned after-hours accessibility involving customer specific.
• Ability to multi-task and work independently with minimal supervision in a non-structured environment. Superior interpersonal skills required to work with suppliers, partners, customers and internal departments for managing the life cycle activities of the submarine cable operation.

JOB REQUIREMENTS

Knowledge and Skill requirements

Education and Experience

• Degree in Engineering. (Electrical, Electronics or Telecommunication Engineering)
• At least 7 to 10 years + relevant experience in submarine cable operations or submarine cable projects

Knowledge, Skills and Abilities

• Experience in driving submarine cable projects especially on the conceptualization, design, vendor selection, contract forming and Project implementation stages.
• Experience in working with submarine cable equipment like PFE, monitoring equipment, OADM, SLTE, OTDR/COTDR, Spectrum analyzer, etc.
• Experience in handling customer service delivery, assurance or partnership management.
• Well-developed analytical and problem-solving skills, with the ability to set priorities, recognize basic causes, and recommend problem solutions that meet the practical needs of the business
• Good communication skills (both written and verbal)
• Balanced interpersonal style; a team player able to work effectively with employees at all levels
• Self-starter, able to take initiative and work with minimum direction in a fast-paced environment
• Ability to work under severe time pressure

* Responsible to analyze, review and approve customer ECO (Engineering Change Orders) and Implement ECO for

Engineering related.

* Responsible to develop and maintain (review and approve) Bill of Material, Work Instructions and Validation / Verification

protocol & report etc.

* Responsible to provide training to production personnel on Work Instructions.

* Attend Line quality issues and trouble shoot Engineering related issues.

* Responsible to review and approve Incident Reports, if any.

* Maintain Consigned/In-house Tooling, Jig and Fixtures and conduct PM (Preventive Maintenance) and repair support as

required.

* Coordinate with FA engineer and perform First Article qualification of parts.

* Participate in periodic Validation/Calibration activities to ensure smooth running of production line.

* Participate in LEAN activities pertaining to Cycle Time, Process, Safety and Yield improvements for Line balancing.

* Responsible for Line set-up and providing the design and method of handling, labeling and storage of KTE box and Milk-Run

Trolley.

* Other tasks as and when required and directed by Engineer.

* Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering

to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and

targets through participation of EHS programs

* Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

* Technical knowledge of Test Trouble-shooting and / or System box build Assembly

* PC Literate: Word, Excel, PowerPoint etc.

* Good technical and commercial communication skills. Excellent verbal and written communication skills.

* Good team player

Report to the Project Manager

· Overall in charge of site coordination.

· Lead a team of operation staff in daily operations.

· Manage and oversee the day-to-day construction activities of the project.

· Monitor and control the general workers' deployment on-site.

· Maintain and manage site storage areas for building materials and equipment.

· Maintain site access throughout the construction period.

· Planning ahead to prevent the problem on-site before it occurs, planning the delivery and storage of equipment and materials.

· Ensure progress of work is within budget and timelines as well as quality and safety objectives.

· Control and monitor work progress and resources.

· Monitor and control material wastage.

· In-depth understanding of project specifications, technical details, and construction drawings.

· Carry out work scheduling, material requisition planning, project coordination, and documentation.

· Ensure timely completion and good quality of works & carried out safely and WSHE regulations are complied with.

· Provide proper guidance and training to junior staff.

· Other ad-hoc duties as assigned by the Immediate Supervisor/ Management.

Job role

· The Construction Manager should be capable of managing the site, executing construction operations, timely completion of project within allowable costing or budget

· The candidate also assesses compliance with the relevant regulatory and legislative requirements.

· The candidate is meticulous and highly detail-orientated, possesses good communication, problem-solving, and interpersonal skills, and works on-site.

Job description

· In-charge of project implementation, efficient use of resources till successful projects completion within contractual schedule and budgeted cost,

· Able in planning and creating schedules and project timelines

· Track schedule, control subcontractors and suppliers to meet schedule, safety and quality objectives

· Ensuring all works carried out to meet the company’s quality standards and contractual requirements

· Co-ordinate with clients, sub-contractors and consultants on the projects matters

· Ensure engineers, supervisors & foremen meet clients & regulatory requirements, as well as environmental, safety and health practices, are carried out at all times

· Planning of daily activity by coordinating responsibilities of site engineers/site supervisors and sub-contractors

· Other ad-hoc duties by Management assigned from time to time

Job requirements

· Recognized Degree in Civil and/or Structural Engineering) or equivalent

· Minimum 3-4 years of practical working experience

· Computer literate such as project management, excel, power points, words, etc,

· Certificate in Construction Safety Course for Project Managers

· Excellent leadership, time management, analytical, communication, presentation, and interpersonal skills

· Organised, meticulous with positive work attitude

· Good team player with strong leadership skills

· Skilled in managing and motivating diverse, multi-functional, multi-cultural project teams.

Supervise Service Technician

Troubleshooting all technicial repair if service technician encounter issue

Handle customer enquiry

Planning schedule for appointment

Must posses Class 3 driving licence to attend client repair

Must fleunt in English and posses high level customer service skill

Must have knowledge in air con / fridge / washer / home appliances repair

Job Responsibilities

• Project coordination and Supervision of ACMV site progress
• Attend site meetings
• Coordination with sub-contractors
• Reporting Project Progress
• any other duties assigned

Job Requirements

• Fresh Graduate Welcome
• Degree in Engineering / Materials
• Working days per week: 6
• Working hours : 0830 - 1730hrs

· Possess in-depth product knowledge and able to conduct presentations to Electrical , and end users.

· Achieve sales targets by assessing current client needs; Meet key performance metrics established

· Reach out to potential clients on a cyclical basis to promote our latest collections and services

· Coordination and supervision work, communicate with other departments cordially to ensure standards and service levels are met

· Perform market research, regular competitor monitoring and create brand awareness in industry.

· Assist tender manager to manage tender processes and project development phase, work with key Contractors

· Gather market information including change of regulations, competitors and customers’ activities development.

· Identify new market trends, market players, technologies and latest industry development relevant to our business.

· Creating positive, long-lasting relationships with current and potential clients

· Running outbound campaigns (phone calls, emails, etc.) to create sales opportunities

· Maintaining client activities.

· Monitor and report on the performance of business development initiatives, adjusting strategies as needed to achieve targets.

· Work closely with cross-functional teams including marketing, product development, and operations to ensure alignment and support for business initiatives.

Job Responsibilities

1. Handling general admin paperworks & matters.

2. Preparing monthly reports.

3. Perform other duties as assigned.

Job Requirements

Min 2 years working experience

N level or equivalent

Other Requirements:

Working days per week: 5.5

Working Hours:

Mon-Fri : 0830hrs-1730hrs

Sat : 0830hrs-1230hrs

We are looking to employ a dedicated and experienced Site Supervisor to oversee construction projects and supervise the construction team. The Site Supervisor's responsibilities include ordering building supplies, scheduling equipment maintenance as needed, and training new construction employees. You should also be able to perform first aid in emergencies. To be successful as a Site Supervisor, you should be detail-oriented and knowledgeable of building codes and construction safety regulations. Ultimately, an outstanding Site Supervisor should be able to interpret building plans as well as demonstrate exceptional leadership, communication, and problem-solving skills. Site Supervisor Responsibilities: Inspecting construction sites regularly to identify and eliminate potential safety hazards. Supervising and instructing the construction team as well as subcontractors. Educating site workers on construction safety regulations and accident protocol. Enforcing site safety rules to minimize work-related accidents and injuries. Handling site accidents in accordance with established accident protocol. Maintaining an accurate record of construction employee attendance. Evaluating the performance of construction employees and instituting disciplinary measures as needed. Analyzing blueprints to ensure that construction projects meet design, safety, and budget specifications. Recommending changes to construction operations or procedures to increase efficiency.Inspecting construction work. Ensuring workplace safety is in place. Inspecting on construction drawing plan. Discussing with vendor on project. Discussing on project details. Inspecting construction work. Ensuring workplace safety is in place.

Responsibilities

· To carry out works as assigned and ensuring that the works are carried out to schedule and in accordance to relevant regulations.

· Coordinate and supervise site workers, identify operating problems and perform trouble shooting and emergency repair.

· Perform routine maintenance work on TBM equipment.

· Responsible for the installation of TBM parts including repair and replace damaged/worn out parts.

· Testing of TBM equipment to ensure smooth running.

· Assist the daily activities at work site to meet project progress and the main contractor’s program and requirements.

· Preparation and submission of site daily progress reports.

· To attend the project meetings.

· To perform testing and commissioning at work site.

· Assisting the Project Manager in the management of the site on a daily basis.

Requirements

· Diploma or Degree in Electrical Engineering or equivalent.

· Minimum 5-10 years of experience in the tunnelling industry.

· Relevant project experience in the field of tunnelling project in Singapore.

· Good interpersonal and communication skills.

· A team player with strong passion in project management, marketing.

· Self-motivated and able to leverage on team.

· Resourceful, meticulous, able to multi-task and handle pressure well.

· Responsible and positive working attitude.

Responsibilities:

· Understand and be familiar with professional practice and contract administration processes. Technical knowledge in contracts terms and law.

· Review on the supplier/contractor quotation or proposal and make sure that all requirements are complied with.

· Able to provide budget cost or estimates as per instruction.

· Able to communicate with other Departments in dealing with various documents and issues.

· Coordinate with the supplier/contractor regarding follow up on bills and quantities.

· Prepare and submit monthly payment claim to client.

· To source supplier locally/overseas for items required by client and follow up the necessary accordingly.

· To evaluate and tabulate monthly /quarterly for material and labour cost. Finalization of project final accounts.

· Tendering process and tender evaluation report. To reply tender clarification, preparation for tender interview and presentation etc.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey, Engineering (Mechatronic/Electromechanical) or equivalent.
• Required language(s): English/Mandarin (to coordinate with the Chinese speaking supplier/contractor regarding follow up on bills and quantities).
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): Contracts Management, Cost Management, accurate, analysis, team player.
• Preferably Senior Executive specialized in Quantity Surveying or equivalent.

Responsibilities

· To carry out works as assigned and ensuring that the works are carried out to schedule and in accordance to relevant regulations.

· Coordinate and supervise site workers, identify operating problems and perform trouble shooting and emergency repair.

· Perform routine maintenance work on TBM equipment.

· Responsible for the installation of TBM parts including repair and replace damaged/worn out parts.

· Testing of TBM equipment to ensure smooth running.

· Assist the daily activities at work site to meet project progress and the main contractor’s program and requirements.

· Preparation and submission of site daily progress reports.

· To attend the project meetings.

· To perform testing and commissioning at work site.

· Assisting the Project Manager in the management of the site on a daily basis.

· Any other task as assigned by management.

Requirements

· Diploma or Degree in Mechanical Engineering or equivalent.

· Minimum 5-10 years of experience in the tunnelling industry.

· Relevant project experience in the field of tunnelling project in Singapore.

· Good interpersonal and communication skills.

· A team player with strong passion in project management, marketing.

· Self-motivated and able to leverage on team.

· Resourceful, meticulous, able to multi-task and handle pressure well.

· Responsible and positive working attitude.

Job Description

•Assist the PM in taking over project awarded via kick-off meetings,

•Organize resources and work out the allocation of tasks to work teams and sub-contractors,

•Assist the PM with on and off site meetings pertaining to technical issues,

•Ensuring that project management tools are updated daily and documentation properly done,

•Inspect all installations and carry out inspections with Clients and Consultant's representatives,

•Conduct Testing and Commissioning (T&C) and preparing T&C reports,

•Design corrective actions to mitigate scope ad schedule creeps, and

•Assist the PM in demobilizing and handling over of projects to customer.

•Other duties as assigned.

Requirements

•Preferably with Degree in M&E Coordination / Building Services Engineering / Mechanical / Electrical;

• Candidates without the necessary academic qualification will also be considered based on project references;

•Preferably with 5 years' experience in the construction of M&E or ACMV projects.;

• Required skill(s): MS Office, MS Project, Autocad.;

Interested candidates are invited to apply online with a comprehensive resume, via the APPLY NOW button below or send the resume to [email protected]

Job Description & Requirements

•Prepare tender submission including Bills of Quantities.

•Preparation of tender quotations including taking-off, materials / subcontractors outsourcing and costing.

•Competent to interpret the specification and contract documents.

•Sourcing of new suppliers and subcontractors.

•Analyzing and negotiating costs in preparation of tender BQ and ensuring cost control.

•Responsible for measurement of quantities and cost estimation.

•Prepare Pre an Post Bid Tender clarfication with Consultants.

•Performs other duties as assigned

Requirements

•Degree/ Diploma in Quantity Surveying/ Mechanical/ Electrical Engineering.

•Min 2 years of relevant experience in similar industry will be an added advantage.

•Proficient in MS office applications.

•Strong analytical, communication and interpersonal skills.

•Good know how of M&E works and costing.

Interested candidates are invited to apply online with a comprehensive resume, via the APPLY NOW button below or send the resume to [email protected]

• Plan, conceptualize, and create mechanical designs for new products
• Develop testing processes, and perform testing and validation of new designs
• Generate working prototypes for beta testing and customer demonstration
• Perform engineering calculations to support design work
• Create and review technical drawings, plans, and specifications using computer software
• Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors
• Perform detailed documentation to track project development and design process
• Ensure project timeline is met and project stays within budget

Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Assist in Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Assistants in monitoring projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Other ad hoc projects assigned

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 1-2 years relevant experience (open to entry level)
• Proficient in MS Office, AutoCAD, and BIM
• A team player and with a positive working attitude