Project Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

• Required load and unload material etc
• Maintain material movement record.
• To comply with LTA road safety and traffic regulation and site safety.
• To conduct daily check to ensure vehicle is in good and safe condition/upkeeping of vehicle.
• Valid class 4 driving license and lorry crane operator.
• Prefer ably to start work within short notice.

Roles & Responsibilities:

To ensure the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To coordinate with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To manage project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience / Knowledge in in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA will be an added advantage

More than 3 years of site experience in the construction sector, preferably in the superstructure crosshead/ precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS Certification

Job Description:

· Responsible for full spectrum of payroll function

· Process payroll via Info Tech Payroll system

· Prepare and maintain and maintain employee payroll records

· Preparation and submission of Form IR21, IR8A, IR8S, Appendix 8A and Appendix 8B

· Filing of all government paid leave and claims

· Handle and assist staff queries on benefit and payroll matters

· To undertake other HR functions, ad hoc projects and other duties as and when assigned

Job Requirement:

· Familiar with Employment, CPF/Foreign workers Levy Acts

· Diploma in Admin/HRM

· At least 2 years relevant experience, handling large headcounts

· Independent, hands-on individual with strong time management skills

· Proficient in MS Excel

Roles & Responsibilities:

Involved in all aspects relating to the design and construction management of all types of civil and structural system

To lead the engineering team, carry out civil and structural engineering jobs in front end engineering design, detail engineering design

To generate project specification, design philosophy, calculation template to comply with clients’ requirements and the local authority’s requirements

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

Coordinate with sub-contractors and attend to clients' queries to ensure timely work arrangements

Involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standards

To manage project documentation and maintain accurate records

To ensure compliance with all health and safety regulations

Requirements:

Bachelor Degree in Civil Engineering/Building Construction or any equivalent qualification

Site experience on Super structure works for reinforce concrete, Steel structures and Precast structures

Experience / Knowledge in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA will be an added advantage

Minimum 5 years of relevant working experience in local construction industry will be an added advantage

Good team player and able to work independently

BCSS Certification

Familiar with the local authorities’ requirements for civil and structural submissions

Possesses strong leadership qualities and analytical and reasoning abilities

Possesses the ability to read, analyses, and interpret common technical information, contracts reports and instructions

Job Description :

• Plan, manage and maintain the BIM data in compliance with project requirements
• Create and maintain the project template files to assure standards.
• Coordinate with other discipline and engineers to manage and resolve the clashes.
• Prepare Transmittal on drawings for submission or issuance to sub-contractors
• Supersede and updated the current revision status
• Compile of As-built drawing upon project completion
• Minor coordination of Architectural / Structural / M&E drawings
• Detailing and documentation of working drawing
• Any other duties assigned
• Work with clients/designers on M&E system requirement/design construction
• Liaising with technicians on construction drawings
• Site inspection and update drawings
• Prepare submission drawings and AS-Built drawings
• AutoCAD drafting

Job Description :

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and co-workers about analysis results
• Conducting research and applying new knowledge.
• Designing processes, materials, tools, and systems.
• Making improvements to existing processes, materials, etc.
• Implementing solutions and designs.
• Training other engineering personnel.

To manage and coordinate the production of quality shop drawings and BIM models in all projects assigned with minimal supervision. He/ She must be able to carry out HVAC/piping-related drawings.

• To produce 2D drawings from BIM models with accuracy ensuring drawings produced are according to the Project or the Client’s Drafting Standards and Procedures, and that the drawing submission schedule is achieved.
• Maintain proper records of all issued & received models/drawings, Clash Reports, RFIs, etc.
• BIM Register following the company’s ISO Standards and Procedures and ensuring all the drawings are completed on schedule or promptly.
• Perform regular drawing backups and housekeeping work in the directory
• The secondary role includes developing technical plans, sections, details, and 2D/3D schematic diagrams using AutoCAD and in-house software.
• Accountable for the fluent/organized presentation, content correctness/accuracy of shop drawings production in form, fit, and function through thorough coordinates with other trades and services in 2D/ 3D submission.
• Responsible for ensuring full compliance with the company’s Shop Drawings Standard Operation Procedure, including adherence to design provision/scope of work according to contractual obligations.
• Generate a clash report based on the Matrix provided
• Work under the supervision of the Project Manager and perform the work tasks assigned.

Experience / Skills

• Degree/ Diploma in Mechanical Engineering or other relevant disciplines.
• Preferably with a minimum of 2 years of working experience in space planning, and design coordination, preferably on different scales of projects within engineering design consulting business.
• Having good knowledge of software such as Revit, and AutoCAD.
• Knowledge in Isometric drawings, LOD 350, and Plant 3D will be added advantages
• Good planning skills in managing modeling and drafting work.
• Possess strong initiative, and ability to work independently and within a team environment when required.
• Good interpersonal, written and verbal communication skills.

We regret that only shortlisted candidates will be notified.

Job Description

• Responsible for content planning and creation of marketing collaterals and assets, including copywriting and editing for newsletters, electronic direct mails, brochures, fact sheets, blog articles, case studies, videos, and website.
• Plan and implement integrated marketing campaigns for solutions, events and exhibitions.
• Generate content for digital marketing channels and social media platforms.
• Collaborate with agencies, external vendors and internal stakeholders to develop and ensure the timely delivery of social media campaigns and optimise performance metrics.
• Identify new marketing channels, platforms and media that better achieve marketing and business objectives.
• Assist in ad hoc marketing tasks and activities.

Job Requirements

• Experience in marketing communications and related fields.
• At least 5 years of experience in marketing or corporate communications.
• B2B experience preferred but not mandatory.
• Excellent command of the English language and storytelling skills.
• Independent self-starter with attention to detail.
• Strong project management skills.
• Excellent interpersonal and communication skills.

Job Description

• Prepare project management plan and its sub-plans, such as: work scope statement,
schedule plan, manpower plan, tools and equipment plan, procurement plan
• Provide engineering support in project or plant maintenance
• Coordinate internal and external audit review
• Engineering calculations associated with current carrying capacity of cables, wires,
fuses and other circuit protective devices.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Description

• Establish and maintain processes for managing scope during the project lifecycle, setting quality and performance standards and assessing risks
• Structure and manage integrated, multitrack performance databases for digital, print, social, broadcast, and experiential projects
• Develop and maintain partnerships with third-party resources, including vendors and researchers
• Assign and monitor resources to ensure project efficiency and maximize deliverables
• Report project outcomes and/or risks to the appropriate management channels and escalate issues, as necessary, according to project work plan
• Lead projects from requirements definition through deployment, identifying schedules, scopes, budget estimations, and implementation plans, including risk mitigation
• Coordinate internal and external resources to ensure that projects adhere to scope, schedule, and budget
• Analyze project status and, when necessary, revise the scope, schedule, or budget to ensure that project requirements can be met
• Establish and maintain relationships with relevant client stakeholders, providing day-to-day contact on project status and changes

Roles:

-Interpretation and analyze of production drawings & documents. -Implementing best fabrication / machining practices and techniques to develop and maintain efficient processes to achieve productivity, quality and safety.

-Planning of project and management of the project team to keep project on schedule and budget.

-Handle all day-to-day issues and troubleshooting problems as they arises finding efficient and effective solutions.

-Estimate costs for quotation preparation.

-Coordinate and work closely with management, customers, contractors and suppliers.

-Maintain good customer relationship.

-Perform other duties as assigned to ensure success of project and company objectives.

Requirements:

-NItec / Diploma in Mechanical / Manufacturing Engineering or related.

-At least 5 years experience in metal fabrication and machine shop activities.

-Self-motivated and result-driven mindset

-Great communication and interpersonal skills

Job Description & Requirements

· Inspecting electrical components during and after the product installation

· The Engineer will ensure clarity and alignment for all team members

• Testing IED NUMERICAL Relays for problems and proposing solutions.
• Familiar in Goose configuration
• IEC61850 Configuration in siemens, ABB, Alstom and Schneider relays.
• Modbus RTU, TCP Communication verification.
• Overall commissioning knowledge in Power system and SAS
• Test equipment such as SFRA, Omicron CPC, CTA, CMC and Transformer testing kits.
• Knowledge in Insulation Oil DGA, BDV.

· Conducts tests and experiments requiring modifications in test setups or procedures subjective judgments in measurement

· Assesses requirements and develops new measurement techniques and approaches related to electrical, electronic and microwave measurement areas

· Establishes test and performance criteria and prescribes calibration approaches, tests, equipment and servicing requirements necessary to ensure measurement traceability

. Must be known of Testing and commissioning Electrical equipment, Switchgear equipment and power transformer. Proficient in testing and commissioning electrical substation, Steel plant and power plant. Set up trouble shooting control and protection circuits like Transformer, Circuit Breaker, CT, PT and switchgear wiring. Sometimes need to work overnight for shutdown maintenance job.

1. Must have Min-7 years experience in testing of CT, PT, relay and transformers

2. Must have knowledge in power system Schematics and SLD`s

3. Must have experience in Testing of GIS panels/ Breakers

4. Coordination with OEM for testing and troubleshooting the equipments.

5. knowledge in Basic configuration and testing of Relays.

6. Experience in handling testing equipment like primary and secondary test sets.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We work with organizations to protect them from cyber threats. We help detect new unknown cyber threats through research, fortify networks, and defend critical information infrastructures. Our team consists of cybersecurity experts who use the advanced techniques and technologies to deliver cutting-edge solutions and services.

Responsibilities:

• Develop, refine, and implement cutting-edge algorithms for product research and development or solutions utilizing ensemble or artificial intelligence model workflows.
• Construct APIs to deploy models as microservices/containers.
• Lead architectural and technical design, prototyping, development, and reviews of complex data and algorithmic pipelines.
• Engage in communication and negotiation of technical and analytical solutions, as well as architectural designs, with a diverse range of stakeholders.
• Stay updated on advancements in data science.
• Produce comprehensive technical documentation.

Requirements:

• Strong understanding of machine learning, deep learning, and data science with some hands on experience.
• Proficiency in Python programming language and frameworks such as PyTorch and TensorFlow.
• Excellent problem-solving skills and ability to work in a fast-paced environment.
• Strong communication skills and ability to collaborate effectively with cross-functional teams.
• Proven ability to adapt to new technologies and learn quickly.
• Work location: near Jurong East MRT

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description :

· Document Control support for QA / QC records & documents

· Involved in Non-conformance investigation and follow through Corrective Action Reports

· Provide assistance to the quality team for Client and Internal reports.

· Monitor and update calibration register for all measuring equipment, and arrange recalibration as required

· Verification of Calibration Certificates

· Conduct compliance reviews to ascertain the level of compliance with relevant policies and procedures

· Generate and compile FA reports & documents for Customers

· Any other ad-hoc duties as assigned

Job Requirement :

· NITEC / Diploma holder with at least 2 years of experience in manufacturing / metal fabrication environment

· Able to multi-task and work independently in a fast-paced environment

· Demonstrate initiative, good planning and organizing skills, and attention to detail

· Possess good interpersonal and communication skills

· Understanding of QMS, EMS & OHASA system is an advantage

Other Information :

· Company transport at Gul Circle MRT & Choa Chu Kang MRT

Job Description:

• Develop a Non-Routine Lifting program and advise the Construction Manager accordingly.
• Develop specific Lift Plans.
• Liaise with the Engineering Department for engineering calculations and drawings as required to develop specific Lift Plans according to his Lifting program.
• Prepares procedure in coordination with vendors for internal shifting and load out operations.
• Wart management for project cargo loading and offloading operation active projects, load out operations by floating crane and Roll on load outs.
• Attend JSA meeting and client RA meeting for the assigned project and report to Section Head/Lifting Superintendent/Production Manager/GMO.
• Assist Engineer in preparing yard layout drawing for module location as per construction and load out sequence by confirmed projects and assisting tender department in lifting and load out feasibility check.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Liaise with Lifting / Rigging Superintendent on a day-to-day basis for work progress.
• Liaise with client representatives, classification society surveyors and others to comply with inspection requirements.
• Resolve any technical problems or issues faced at the work site
• Ensuring that the ground conditions are safe for any lifting operation to be performed by mobile cranes

Job Requirements:

• At least 8 years of experience as a lifting supervisor.
• Experience and knowledge in heavy lifting.
• Obtained Lifting Supervisors Safety Course and Work-At-Height Certificate

Job Responsibilities:

· Assist the management to oversee HR Department & manage the full spectrum of HR functions

· Assist in payroll related matters

· Manage and handle employee’s records using E-payroll system

· Responsible for work pass administration such as work pass applications, renewal, cancellation and issuance

· Perform daily HR duties

· Coordinate with all departments on hiring plans, resignations, confirmation and all HR related matters

· Manage E-leave & E-attendance via E-payroll system, including leave type entry, entitlement, application, certificate collection & approval and daily employee’s attendance

· Administer training related matters including coordination or enrolment of internal & external courses, update & maintain training and individual staffs HR records etc.

· Ensure timely & accurate submissions in all government and related claims, e.g. CPF, Childcare Leave, Maternity/Paternity Leave, NS makeup claims, income tax (IR8A & IR21) matters etc.

· Prepare weekly/monthly reports in a timely and accurate manner

· Provide advice and handle all employee inquiries on HR-related matters

· Undertake any ad-hoc projects assigned by the superior/management team from time to time

Job Requirements:

· Possess a Diploma in Human Resources or Administrative / Business Studies or equivalent

· Minimum of 3 years of relevant working experience. Working experience on worker management will be an added advantage

· At least 2-3 years of payroll related experience & familiar with E-payroll System

· 5 days/week

· Familiar with MOM regulations and HR practices

· Good communication, writing and interpersonal skills

· Proficient in Microsoft Office Applications

· A team player with a strong sense of responsibility & self-motivation to get tasks done independently

Job Description:

• Develop system safety program plan, hazard analyses and risk assessment documents, safety assessment report and hazard logs based on contracted system safety and project requirements
• Facilitate system safety reviews and assessment with project system safety working groups and to facilitate and seek technical endorsement for safety assessment report with company and customer safety review boards
• Ensure system safety requirements and implementation are complied with company process and contracted requirements for projects and in-house products
• Submit monthly project status report and updates to Project Manager, System Safety Leads and Department Manager
• Support safety related administrative functions
• Conduct failure investigation and prepares reports for problems or issues based on findings from facts, research, studies and makes necessary recommendations and submits to relevant authority for approval
• Prepare and studies technical drawings, specifications of mechanical systems inclusive of engine, transmission, powerpack and driveline, and scopes of work to ensure (Maintenance, Repair and Overhaul) MRO operations conform to standards and customer requirements
• Document work procedures based on technical requirements for the MRO components
• Analyse and interpret test information to resolve repaired related problems
• Design, maintain, service and implement components so to be able to integrate into in-service systems, and interpret specifications and mechanical drawings for any re-engineering work required
• Responsible include training technicians; planning, assigning, and directing work to a group of technicians; appraising addressing complaints and resolving problems
• Appoint to be lead for a Platform to ensure the MRO Component serviceability is met at all times
• Perform literature searches on the subject area for MRO in Mechanical System especially in engine and transmission
• Assist in providing technology solutions to overcome more complex MRO systems so to allow work focuses upon the effective integration of people, processes, tools and technology in order to improve the MRO into the next level

Job Requirements:

• Degree/ Diploma in Mechanical Engineering with 2 year of working experience related to Automotive fields or MRO Services
• Certified Reliability Engineer will be an added advantage
• Able to read and understand mechanical drawings
• Possess good interpersonal skills and strong ability to work within a team
• Good interpersonal & communication skills
• Ability to present ideas, approach and objectives clearly
• Work under pressure, independent and self-motivated
• Good listener, and able to understand customers problem or question and help them solve it
• Customer orientated
• Good analytical and problem solving skills
• Good communication skills and a strong team player
• Independent, highly motivated, meticulous, resourceful and possess a positive attitude

Job Responsibilities:

• To develop E&I shop drawings based on client given information, specifications, calculations
• Able to make revisions and incorporate comments made by clients
• Make the drawings in keeping with Company standards
• To provide MTO based on drawing details
• Required to maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Head/Leads
• Explain drawings to production or construction teams and provide adjustments as necessary
• Must be able to work in an environment with schedules and priorities
• Hands on knowledge on Auto-cad is essential

Job Requirements:

• Diploma/Bachelor Degree in Electrical Engineering or equivalent
• Hands on AutoCAD knowledge
• Able to work in an environment with tight schedules and priorities

Responsibilities:

• Coordinate with BIM team to get the CSD model ready for approval and construction by the consultant/client’s representatives
• Study, coordinate and review BIM model are in compliance with all necessary standards, code of practice and safety regulations
• Carry out drawing review and coordination among various disciplines within the purview of MEP incorporating into the civil / structural and architectural.
• Prepare and manage the documentation and submittals related to CSD
• Understand of subcontractor's contract drawings/documents and have clear understanding of scope of works as per contract requirement.
• Review and align M&E design drawings to ensure compliance with specification and guidelines
• Manage M&E sub-contractors work progress, drawings submission and approval
• Attend site walk when required to resolve M&E coordination issues on site.
• Facilitate drawings for MEP inspections if required
• Take lead in as-built drawings and submission of O&M.
• To attend sub-con meetings and technical meetings for MEP related matters when required
• Other ad-hoc duties as assigned by the Immediate Supervisor/ Management.

Job Requirements:

• Degree/Diploma in Electrical & Mechanical Engineering/ Building Service. Specialist Diploma in M&E Coordination and BIM/VDC will be an advantage.
• Willing to work at West Area.
• Familiar with Autocad & Revit with min 7 years or more experience as M&E

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

You will hunt, qualify and acquire new businesses with new accounts for the Singapore Public Sector domain. You will work closely with stakeholders from the solutions and project teams in response to RFQ/RFI. We are looking for a candidate with a can-do attitude, strong sense of ownership and desire to succeed in a role with significant growth opportunities in Singapore and regionally.

Be Part of Our Success

• Prospect, build, develop and manage relationships with potential new clients
• Possess good prospects qualification
• Able to collaborate with key stakeholders to develop winning proposals that creates value for the client and respond to RFI/RFQ
• Participate as a key stakeholder in pricing strategy
• Pitch at key events such as trade exhibitions and conferences and solicit feedback and information on market trends, as well as prospect for new clients
• Organise technology demonstration events to showcase capabilities and engage potential customers
• Handle sales cadence where required

Qualities We Value

• Degree in Engineering or Business
• More than 5 years’ experience in Sales and leading a team
• Prior experience in Government sector will be an added advantage
• Good working knowledge of MS Office
• Aptitude in articulating business proposals and plans to key stakeholders
• Hands-on experience with Salesforce software is a plus
• Experience in the homeland borders control, maritime and/or aviation hubs would be ideal
• Working location is in Jurong East
• Singaporeans Only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working location is in Jurong East

1.Min. 10 years experience in engineering, maintenance and project execution in controls, electrical and instrumentation in Oil & Gas and Petrochemical Industries.Knowledgeable in DCS, SCADA, IPS, PLC, Interlock Logic Diagrams, Instrumentation Loop Drawings, Electrical Drawings, P&IDs.Competent in handling Honeywell (EPKS) Experion PKS (including back-up restore, HMI Web Builder, PAS Plant State Suite Alarm Management System, Corworx Software and Maximo/SAP.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job Responsibilities:

• Liaise with the construction team to prepare documents for Request for Quotation (RFQ) or Open Tender.
• Source potential tenderers/subcontractors and send out invitations for RFQs.
• Assist on management of materials and equipment at the construction site.
• Coordinate queries and clarifications between tenderers and construction team during RFQ stage.
• Coordinate post-tender interviews between tenderers, construction team, QS team and contracts team.
• Assist QS manager and contracts manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.
• Assist contracts team in administration of subcontracts.
• Handle payment requests received from subcontractors and suppliers.
• Responsible for quantity calculation of construction drawings, preliminary material research and market survey.
• Assist to evaluate and process vendor claims as needed.
• Any other adhoc tasks assigned by QS Manager / Contracts Manager.

Job Requirements:

• Min. Bachelor’s Degree in Engineering or related field of studies.
• At least 3 years of experience, preferably in Quantity Surveying.
• At least 5 years of Site Experience
• Willing work at West area
• Exprerience in Marine Project is prefered
• Able to work under pressure and work under minimal supervision.

Job Summary:

The Process Safety Engineer is responsible for ensuring that all processes within the facility comply with safety regulations and standards. This role involves identifying, evaluating, and mitigating risks associated with hazardous processes to protect personnel, assets, and the environment. The engineer works closely with multidisciplinary teams to implement safety systems, conduct hazard analyses, and ensure compliance with industry best practices and regulatory requirements.

Key Responsibilities:

1. Process Safety Management (PSM):Develop, implement, and maintain the facility’s PSM program in line with local and international standards (e.g., OSHA PSM, API, IEC 61511).
   Perform regular audits and reviews of safety management systems.
   
2. Risk Assessment and Hazard Analysis:Conduct and facilitate risk assessments such as HAZID, HAZOP, LOPA, and SIL assessments.
   Analyze process safety incidents and near misses to identify root causes and corrective actions.
   Implement and maintain risk control measures.
   
3. Safety Design and Systems:Ensure the design and operation of safety-critical equipment meet safety requirements.
   Specify, evaluate, and test safety instrumented systems (SIS) and emergency shutdown systems (ESD).
   Provide input on process design reviews to ensure inherent safety principles are applied.
   
4. Compliance and Standards:Ensure compliance with applicable safety standards, codes, and regulations.
   Prepare and submit required safety documentation and reports to regulatory bodies.
   Liaise with government agencies, certification bodies, and auditors as needed.
   
5. Emergency Response Planning:Support the development of emergency response plans and procedures.
   Conduct process safety drills and training sessions for staff.
   
6. Training and Development:Provide training to operations and maintenance personnel on process safety concepts and best practices.
   Promote a strong safety culture within the organization.
   
7. Incident Investigation:Lead or support investigations into process-related incidents.
   Develop and implement corrective and preventive actions to mitigate future risks.
   
8. Collaboration and Communication:Work closely with operations, maintenance, engineering, and project teams to ensure process safety is integrated into all activities.
   Provide technical guidance on process safety issues.
   

Key Requirements:

Qualifications:

• Bachelor's degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Advanced certifications in process safety (e.g., CCPS Process Safety Professional Certification, NEBOSH Process Safety Management) are a plus.

Experience:

• Minimum 10 years of experience in process safety engineering within the oil and gas industry, ideally with FPSO, refinery, or petrochemical exposure.
• Proven track record of implementing process safety programs and conducting risk assessments.

Technical Skills:

• Strong knowledge of process safety management frameworks and standards (e.g., OSHA PSM, API, IEC 61508/61511).
• Proficiency in process hazard analysis tools such as PHAST, PHA-Pro, or BowTie XP.
• Familiarity with safety design concepts, such as flare systems, relief valves, and blowdown systems.
• Understanding of fire and gas detection systems, ESD, and SIL verification.

Soft Skills:

• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills for cross-functional collaboration.
• Attention to detail and ability to manage multiple priorities effectively.

Preferred:

• Experience working on offshore or FPSO projects.
• Familiarity with environmental regulations and sustainability practices in the oil and gas sector.