Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Role:

Process Engineer (Chemical Engineering / Operations)

• Singapore Based (Tuas // Company Transport / Transport Allowance if candidate travel to work by themselves (S$120)
• 5 Days work per week (Mon to Fri 8am to 5pm)
• Basic: $3800 to $4300 + site allowances
• At least a Bachelor in Chemical Engineering + Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Career Progression Opportunities

Job scope

Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)

Perform risk assessments

Research, design, and develop processes to optimize productivity and workflow

Oversee operations and maintenance of facility processes

Determine the organization and setup of operations

Oversee implementation of new processes and procedures

Investigate and troubleshoot any problems that arise with processes, procedures, and operations

Develop best practices, routines and innovative solutions to improve throughput and quality of output

Manage cost and time constraints

Provide process documentation and operating instructions

Involve and perform PSM and Hazop study

Become turnkey manager to plan and execute plant shutdown

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Your Impact

Site Reliability Engineering (SRE) is an engineering discipline that combines software and systems engineering to build and run large-scale, massively distributed, fault-tolerant systems. At Goldman Sachs, SRE is responsible for improving the availability and reliability of some of the firm’s most critical platform services, and ensures they meet the requirements of our internal and external users. We are looking for engineers who are motivated to collaborate with our businesses to build and run sustainable production systems, which can evolve and adapt to changes in our fast-paced, global business environment.

The SRE team develops and maintains platforms and tools which help other engineering teams in Goldman Sachs to build and operate reliable and resilient systems. The platforms we offer range from central logging and tracing to monitoring and alerting and we provide tools to drive adoption and improvements to capacity planning, operational readiness assessments, production incident postmortems, SLIs / SLOs, and deployment automation including canary releases.

The products and services we provide to our internal customers are used by thousands of engineers every day. We believe that reliability is the most important feature of any system, and we are devoted to giving our engineers the platforms and tools they need to build and operate reliable products.

How You Will Fulfil Your Potential

As a developer in the SRE team, you will work with internal customers, product owners, and SREs to design, develop, and support the platforms and tools we provide to other engineering teams to enable them to run reliable large scale production systems spanning cloud and on-prem datacenters.

Responsibilities

• Design, develop, and support SRE platforms and tools
• Create and support automation solutions and build out monitoring and alerting to improve the reliability of the platforms and tools we operate
• Collaborate with other teams to onboard them onto SRE owned platforms and tools and help them implement SRE best practices
• Adhere to and drive SRE disciplines and processes across the global team

Basic Qualifications

• Degree in computer science or engineering with at least 3 years industry experience
• Proficiency in at least one major programming language, preferably in Java or Go and JavaScript / Typescript
• Excellent programming skills including debugging, testing, and optimizing code
• Strong problem solving / analytical skills
• Experience with algorithms, data structures as well as software and system design
• Experience automating operational tasks
• Comfortable with technical ownership, managing multiple stakeholders, and working as part of a global team

Preferred Experience

• Experience with distributed systems design, maintenance, and troubleshooting
• Experience with databases / data stores like PostgreSQL, MongoDB, and Elasticsearch
• Proficiency in using Terraform for Infrastructure deployment and management
• Knowledge of cloud native solutions in AWS or GCP
• Systems experience in Linux and networking, especially in scaling for performance and debugging complex distributed systems
• Experience with monitoring and alerting systems

ABOUT GOLDMAN SACHS

At Goldman Sachs, we commit our people, capital and ideas to help our clients, shareholders and the communities we serve to grow. Founded in 1869, we are a leading global investment banking, securities and investment management firm. Headquartered in New York, we maintain offices around the world.

We believe who you are makes you better at what you do. We're committed to fostering and advancing diversity and inclusion in our own workplace and beyond by ensuring every individual within our firm has a number of opportunities to grow professionally and personally, from our training and development opportunities and firmwide networks to benefits, wellness and personal finance offerings and mindfulness programs. Learn more about our culture, benefits, and people at GS.com/careers.

We’re committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: https://www.goldmansachs.com/careers/footer/disability-statement.html

© The Goldman Sachs Group, Inc., 2024. All rights reserved.

Goldman Sachs is an equal employment/affirmative action employer Female/Minority/Disability/Veteran/Sexual Orientation/Gender Identity

Client: Engineering Industry

Location: AMK (Working onsite), 8.30am - 6pm / 5 Days (Weekend Standby)

Salary: $2500 - $4000 (Based on experience and capability)

• Diploma / Degree in Mechanical/Electrical Engineering or ACMV related discipline.
• Experience in checking and diagnosing fault in the Chilled water Fan Coil (CHWFCU) and Air Handling Units (AHU) installed in various sites.
• Examination of critical components, inspection of electrical connections and analysis of operation parameters, such as, temperatures, pressures, noises and vibrations.
• Able to communicate effectively with customers to resolve complaints.
• Coordinate with factory and contractors to ensure efficient job execution.
• Assist in schedule planning and prepare reports for management review.

TO APPLY:

Please send in a detailed resume to [email protected] / Whatsapp 89101675.

Subject: Chiller Service Engineer / Eng Asst > IMMED

• State your last drawn salary and Expected salary (With current & previous employers)
• The notice required and availability date
• Reason for leaving each employment

NOTE: ** Our Consultants will contact you if shortlisted.

Take Care, Stay Safe & God Bless.

MOM Certified: R 1103510

First 3 months probation basic $2600, after confirmation is $2700!

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Salary: $2500-$2800+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Position Summary:

The Manager will be responsible for overseeing automotive maintenance projects and supporting the Engineering and Operations Control team through innovation and data analysis. The role requires expertise in project execution, optimizing maintenance processes, and leveraging data analytics to drive operational efficiency. The Manager will also play a key role in implementing technological advancements and continuous improvement initiatives to support business objectives.

Key Responsibilities:

1. Project Management for Corporate Fleet:

• Oversee projects, from planning and execution to monitoring and closure.
• Ensure all maintenance activities align with safety standards, quality control, and regulatory compliance.
• Coordinate with cross-functional teams to ensure timely and cost-effective project delivery.
• Manage project timelines, budgets, and resources effectively.
• Track and report project progress to senior management and key stakeholders.

2. Support Engineering & Operations Control:

• Collaborate with workshop operations teams to drive improvements in fleet maintenance operations.
• Develop and implement data-driven strategies to enhance operational performance, including efficiency, productivity, and resource utilization.
• Use data analytics and KPIs to monitor and evaluate the performance of maintenance processes.
• Assist in the development of dashboards and reporting tools to provide real-time insights into maintenance performance and equipment health.

3. Innovation & Continuous Improvement:

• Identify opportunities for innovation and process improvement in automotive maintenance operations.
• Stay up-to-date with the latest trends in automotive engineering and operations control to ensure the company remains competitive.

4. Stakeholder Collaboration:

• Work closely with internal teams (Engineering, Operations, IT, etc.) and external partners (vendors, subcontractors, etc.) to ensure alignment on project goals and execution.
• Engage with senior management to align project outcomes with business strategy.
• Provide technical guidance and support to the maintenance and operations teams.

5. Resource & Team Management:

• Lead training initiatives to ensure that teams are proficient in the latest tools and technologies related to automotive maintenance.

Key Qualifications:

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or related field.
• Minimum of 5-7 years of experience in automotive maintenance, project management, or engineering operations control, with at least 2 years in a managerial or supervisory role.
• Proven experience managing complex automotive maintenance projects. PMP or similar certification is advantageous.
• In-depth knowledge of automotive systems, fleet maintenance, and data analytics.
• Strong analytical skills and experience with data analysis tools to optimize operations.
• Experience implementing new technologies, driving process improvements, and promoting innovation.
• Strong written and verbal communication skills, with the ability to influence stakeholders and present data-driven insights.

Competencies:

• Strong problem-solving and critical thinking skills.
• Proactive approach to identifying and implementing solutions.
• Ability to manage multiple priorities and projects simultaneously.
• Ability to work effectively in a fast-paced and dynamic environment.

Working Conditions:

• Office-based with regular visits to automotive maintenance sites and operations centers.
• Occasional travel may be required to meet with external vendors and stakeholders.

An established organisation in the Healthcare industry is looking for a passionate and suitable candidate to join their team as a Facilities Management & Engineering executive!

• Certified Fire Safety Manager

• Mondays to Fridays, Office Hours

• Walkable distance from One-north MRT (Relocation to Novena in 2025)

• Salary: $3500-4500

Job Responsibilities:

• Oversee facilities in assigned clinics

• Collaborate with contractors and vendors in compliance of rules and regulations

• Ensure maintenance works are up to organisation’s standards

• Conduct routine checks and contractor performance reviews

• Provide assistance in new clinic developments

• Consolidate user requirements for projects

• Ensure facility management and security pass the ESS and OHSAS certifications

• Respond to alarm or critical faults

• Perform ad-hoc duties as assigned

Job Requirements:

• Minimum Degree in Estate Management/ Facility Management/ Building/ Engineering or equivalent

• Preferrable to be a Certified Fire Safety Manager

• Minimum 1-2 years of relevant work experience in healthcare facilities management

Interested and suitable candidates, please email your CV in MS Word to

[email protected]

Ammerline Lam Sze Yi (Ms)

Division Manager

CEI Registration No.: R1104463

Celecti Pte Ltd.

EA License: 16C8045

Personal Data Protection

“By submitting your curriculum vitae or disclosing your personal information in connection with your job application, you are deemed to have read and agreed to the terms of our Privacy Policy, and consented to the collection, use and disclosure of your personal data by us, in accordance with our Privacy Policy. Please access our website at www.celecti.com.sg for a copy of our Privacy Policy.”

Our client is a well-established MNC, market leader in the Engineering industry. They are looking for a Senior HR Executive to assist their team for the next phase of their business. They are located in the West area – easily accessible.

Responsibilities:

• HR functions and general admin support
• Process monthly payroll
• Recruitment and Selection
• Follow strict compliance with data protection regulations.
• Adhere to all Personal Data Protection Act (PDPA) guidelines, ensuring compliance company requirements.
• Manage employment benefits in a sustainable manner by utilizing government support programs where appropriate, balancing employee expectations with organizational needs.
• Collaboration with Managers address manpower requirements
• Support HR policies and provide training initiatives to enhance skills and workforce development.
• Promote a culture of continuous improvement by sustaining the 5S methodology in daily operations.
• All other ad hoc duties as assigned

Requirements:

• Minimum Diploma in HR or other relevant field of studies
• Minimum 4 years of relevant experiences

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R23115674 (Chong Jia Jia)

Description:

• You will be responsible for providing sterile and serviceable surgical instruments and equipment.
• You will be involved in the decontamination, inspection, preparation, packaging, sterilization, storage and distribution of the sterile devices to operating theatres and procedural rooms.
• You will also be involved in projects involving work-process improvements as you gain experience in the department.

Requirements:

• Min Diploma in any Engineering
• Able to commit to rotating day & night shift work
• No exp needed, training provided

Location: Outram

Working hours: 3 rotating shifts (8am to 4.35pm; 1pm to 9.35pm; 9pm to 7.30am)

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Skills and experiences required

· Able to do AUTOCAD

· MS Office at least to intermediate level

· Able to work independently with minimal supervision

· Able to work under tight deadlines and schedules

· Good technical and communication skills

· Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking site workers, subcons/vendors

Duties & Responsibilities

· Coordinate piping design with other engineering disciplines

· Prepare piping layouts, general specifications and documents according to project standards.

· Analyze and interpret stress/vibration results, offering recommendations for piping system designs.

· Develop piping layouts for critical equipment like compressors and reactors, in 3D CAD if possible

· Review project documentation such as scope of work, schedules, and design basis.

· Assist in planning and organizing piping engineering activities, including manpower requirements and schedules, ensuring alignment with project scope and budget.

· Able to do material take-off (MTO) and ensure conformance with company design standards and compliance with project specifications, codes, and industry practices.

· Participate in inter-department coordination on all project-related issues

· Support field engineering during construction and advise on installation and testing.

· Conduct site visits

· Any other relevant tasks as assigned by Project Manager

Qualifications & Other requirements

· Diploma/Degree in relevant industry. Safety certifications an added advantage

· Min. 3-year working experience in a construction firm

· Ability to work well in high volume, fast-paced environment as a member of a collaborative team

· Singaporean or Singapore PR preferred

Job Responsibilities:

1) Conceptualize all aspects of mechanical & electrial design and engineering, basis of design, scope of work, development of construction documents and execute the project with the detailed designs.

2) Assist and support the Project Manager in handling and monitoring the progress of projects to ensure that work on site is on schedule.

3) Liaise and coordinate project site works with consultants, vendors, suppliers and sub-contractors.

4) Ensure that all works carried out exceeds industry standards and are in compliance with local legislations, QHSE requirements and other regulations.

5) Arrange timely and consistent communication sessions with internal and external stakeholders.

6) Manage the detailed mechanical design of municipal scale wastewater treatment systems (if needed).

7) Assist in proposal preparation; contract preparation and negotiation; coordination with regulatory agencies; project planning, budgeting, and scheduling.

8) Able to interpret Mechanical and Electrical schematic drawings issued by the Consultant and prepare the tender proposal.

Job Requirements:

1) Degree in Mechanical or Electrical Engineering or any equivalent qualification recognized by PEB.

2) Minimum 3 to 5 years of relevant working experiences.

3) Preferable infrastructure, building services, possess Environment, Water or Waste Water Engineering experiences.

4) Able to communicate clearly with people at all levels about goals, responsibility, performance, expectations, and feedbacks.

5) Manage various sub-contractors for Building services.

Skills and experiences required

· Minimum 5 years of hands-on experience in the construction industry in Singapore

· Demonstrated experience in managing and co-ordinating large-scale construction projects effectively, within budget and timeline, performing as a Project Manager role

· Willing to work extended hours and/or on weekends & public holidays when urgently required

· A team player with initiative, drive and a positive attitude

· Possess Construction Safety Course for Project Manager Certificate (CSCPM)

· Singaporean / Singapore PR preferred

· Preferably able to commence immediately

Duties & Responsibilities

· Able to plan, oversee and manage all phases of company construction projects

· Develop and maintain project schedule, ensuring projects are delivered on time, within budget and to the highest quality standards while adhering to local building regulations and safety requirements.

· Provide the direction in construction planning to ensure overall construction progress is based on schedule of works.

· Manage Client relationship and expectations throughout the project lifecycle.

· Manage all coordination and communications with Consultants, Architects, Subcontractors and authorities (BCA, URA, etc) to ensure smooth project execution

· Monitor project costs and implement effective cost control measures

· Oversee project documentation including Temporary Occupation Permit (TOP) and Certificate of Statutory Completion (CSC)

· Lead and motivate project teams

Qualifications & Other requirements

• Degree in Civil Engineering, Construction Management or its equivalent
• At least 6 years of relevant experience
• Knowledge of LTA regulations and BCA standards.
• MS Office at least to intermediate level

Skills and experiences required

· Proficient in AUTOCAD & REVIT

· Knowledge of BIM (Building Information Management) will be an added advantage

· Minimum 3 – 5 years of relevant experience working in M&E construction or similar capacity

· Able to work under tight deadlines and schedules

· Meticulous and strong in construction detailing

· MS Office at least to intermediate level

Duties & Responsibilities

· Prepare contract documentation drawings for preliminary, construction and as-built status

· To work with Project Managers, Project Engineers and to co-ordinate with consultants as well as main and sub contractors on interpretation of drawings

· Prepare shop drawings for Mechanical system

· Ensure drawings are compliant with the regulatory specifications

· Ensures qualitative and timely delivery of all drawings and maintain soft copy of archive drawings

· Attend weekly meetings

Qualifications & Other requirements

· Diploma in Mechanical/Electrical / Higher NITEC holders or its equivalent

· Willing to work extended hours and/or on weekends & public holidays when urgently required

· A team player with initiative, drive and a positive attitude

· Singaporean / Singapore PR preferred

· Preferably able to commence immediately

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of relevant working experience
• Able to work from 7am - 7pm

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

To support Finance Lead in the payment workstream, to review and approve payment transactions for the College of Design & Engineering and providing advisory support and ensuring compliance with University’s Financial Policies and Procedures.

Duties & Responsibilities

• Counter-check invoices and Request for Payments (RFP)
• Approve the invoices and RFPs in the system
• Provide advisory on payment policies and procedures
• Other administrative tasks assigned

Qualifications

• O-level or Polytechnic Diploma in any field;
• Preferably with 3-5 years of relevant working experience;
• Meticulous with great attention to details
• A good team player with positive attitude;
• Customer centric mindset and Good communications skill;
• Familiar with MS Office applications;
• Good written and spoken English

Position: Engineering Manager
Location: Singapore
Employment Type: Full-time

Company Overview:
We are a dynamic organization in Singapore, looking for an experienced and motivated Engineering Manager to join our team. We are seeking a highly skilled professional with extensive engineering and management experience to oversee and lead our engineering projects effectively.

Position Requirements

• Minimum Education: Diploma in Engineering (any major)
• Experience:Engineering Experience: Minimum 10 years of working experience in any Singapore-based company
  Management Experience: At least 5 years in a managerial or supervisory role
  

Key Responsibilities

• Lead and manage engineering projects from planning to completion
• Coordinate with cross-functional teams to ensure project timelines, quality, and efficiency
• Implement best practices in engineering management, promoting productivity and safety
• Evaluate team performance and provide guidance and support for professional development
• Ensure compliance with industry standards and company policies

Terms and Conditions

1. Accommodation: Candidate must stay in the company-provided lodge.
2. Availability: Candidate must be willing to work beyond regular working hours as needed.
3. Probation Period: This position has an initial three-month probation period, after which the candidate's performance will be evaluated to confirm permanent placement.

Skills and Competencies

• Strong leadership and team management skills
• Excellent problem-solving and decision-making abilities
• Proficiency in engineering tools, project management software, and regulatory standards
• Adaptability to work in a dynamic environment and manage multiple projects simultaneously

Position: Engineering Manager
Location: Singapore
Employment Type: Full-time

Company Overview:
We are a dynamic organization in Singapore, looking for an experienced and motivated Engineering Manager to join our team. We are seeking a highly skilled professional with extensive engineering and management experience to oversee and lead our engineering projects effectively.

Position Requirements

• Minimum Education: Diploma in Engineering (any major)
• Experience:Engineering Experience: Minimum 10 years of working experience in any Singapore-based company
  Management Experience: At least 3 years in a managerial or supervisory role
  

Key Responsibilities

• Lead and manage engineering projects from planning to completion
• Coordinate with cross-functional teams to ensure project timelines, quality, and efficiency
• Implement best practices in engineering management, promoting productivity and safety
• Evaluate team performance and provide guidance and support for professional development
• Ensure compliance with industry standards and company policies

Terms and Conditions

1. Accommodation: Candidate must stay in the company-provided lodge.
2. Availability: Candidate must be willing to work beyond regular working hours as needed.
3. Probation Period: This position has an initial three-month probation period, after which the candidate's performance will be evaluated to confirm permanent placement.

Skills and Competencies

• Strong leadership and team management skills
• Excellent problem-solving and decision-making abilities
• Proficiency in engineering tools, project management software, and regulatory standards
• Adaptability to work in a dynamic environment and manage multiple projects simultaneously

Job Description

Join our dynamic team as an Engineering Technician, this attachment offers a unique opportunity to gain hands-on experience and technical skills in a fast-growing company serving both the Ministry of Education and multinational corporations. As an Engineering Technician, you will play a vital role in supporting our operations, ensuring the smooth functioning of our supply operations and photocopier services.

Responsibilities

• Assist in the installation and setup of new equipment, including testing and calibration procedures

• Provide training and support to end-users on proper equipment usage and maintenance procedures.

• Troubleshoot technical issues and provide timely solutions to ensure minimal disruption to operations.

• Perform routine maintenance and repairs on photocopiers and printing equipment.

• Collaborate with cross-functional teams to identify areas for improvement and implement process enhancements.

• Maintain accurate records of maintenance activities, equipment inventory and service history.

Skill & Competencies

• Proficiency in troubleshooting and repairing photocopiers and printing equipment.

• Knowledge of electrical systems, mechanical components and digital imaging technology.

• Familiarity with diagnostic tools and software for equipment maintenance.

• Ability to interpret technical manuals, schematics and diagrams.

• Strong attention to detail and problem-solving skills.

• Excellent communication and interpersonal abilities for interacting with colleagues and clients.

• Willingness to learn and adapt to new technologies and processes.

My company are looking for a Civil Engineer who can preparation of highlighted drawing and documents for ongoing project. Draw shop drawing plan sections & elevations from tender drawings of all civil work. Prepare and collate architectural, structural shop drawing including as-build drawing. Preparation of DLP maintenance schedule. Attend on-site meeting , discuss the project requirements and highlight to client & consultant as necessary, attend site inspection with RTO.

And can independent and self-motivation work.

The candidates need to have construction working experience.

Major of study and degree- Bachelor of Science in Civil Engineering

Ensure installation is carried out as per construction drawings;

To monitor the progress and quality of work being performed by workers;

Ensure that works are executed within an acceptable standard of workmanship;

Attend the daily tool-box meeting and convey clear instruction accordingly;

Understand and ensure compliance in project requirement and scope of work.

Prepare Daily Reports and Production Report;

application of design software in planning and designing hydraulic and transportation systems, and structures following;

To work closely with other site operations staff to meet the project schedule;

To supervise the work of sub-contractors and in-house workers;

• Apply mortar to tile back, position the tile, press and tap with trowel handle to affix tile to base.
• Assist the mechanics in the installation of ceramic tiles by preparing mortar and cutting tiles.
• Prepare and apply mortar or other adhesives to install tile and marble in a plan area.
• Ordering stock supplies and gathering tiling equipment.
• Applying tiling cement and arranging tiles or marble according to design plans.
• Applying tiling grout.