Mon to Fri: 8:15am to 5:30pm

Responsibilities:

- Leads new product design, development activities of connectors, wire harness and electronic packages.

- Responsible for managing pre-engineering, product design development of new products.

- Performs value analysis, value engineering and troubleshooting.

- Manage a team of Product Design engineers and responsible for products’ lifecycle.

- Guide team in performing data analysis, yield enhancement, product cost reduction and device reliability improvement.

- Develop market-specific connector products and optimizing product designs and yields.

- Initiate and implement improvement processes to improve efficiency and sustainability in productions.

- Communicate technical information to non-technical stakeholders, and building relationships with suppliers and customers.

- Ensure processes meet quality standards and safety compliance requirements.

Requirements:

- Degree / Diploma in Mechanical Engineering/ Electrical Engineering and or other related certifications.

- Possess relevant connectors industry knowledge and expertise

- At least 8 years of experience involved with product engineering (design and development)

- Experienced in leading a team

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Engineering Assistant / Assistant QA Engineer
• Working Location: Pioneer (Nearby MRT station)
• Working Hours: 5 days (Monday to Friday, 7.45 AM – 4.45 PM)
• Salary Package: Basic Salary up to $3,000 + Transport Allowance + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain all lab equipment.
• Perform daily analysis of plating chemicals.
• Calculate the required top-up amounts for plating chemicals.
• Update control charts and ensure all analysis results are accurately recorded.
• Calibrate lab and wastewater treatment plant’s ORP meters in-house.
• Review and update work instructions for the lab and wastewater treatment plant as needed.
• Ensure smooth operation of auto-analyzers for treated effluents.
• Monitor and maintain inventory for "Quick Test Kits" used for daily effluent checks.
• Keep the plating laboratory clean and organized following 5S housekeeping principles.
• Complete other tasks assigned by the supervisor.
• Manage product/process Control Plan, FMEA, and Process Flow.
• Assist with internal and external audits when required.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Engineering or relevant
• Has minimum of 3 years' relevant working experience in a manufacturing environment
• Proficient in Microsoft Office software applications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67166 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The Manager will be responsible for overseeing automotive maintenance projects and supporting the Engineering and Operations Control team through innovation and data analysis. The role requires expertise in project execution, optimizing maintenance processes, and leveraging data analytics to drive operational efficiency. The Manager will also play a key role in implementing technological advancements and continuous improvement initiatives to support business objectives.

Key Responsibilities:

1. Project Management for Corporate Fleet:

• Oversee projects, from planning and execution to monitoring and closure.
• Ensure all maintenance activities align with safety standards, quality control, and regulatory compliance.
• Coordinate with cross-functional teams to ensure timely and cost-effective project delivery.
• Manage project timelines, budgets, and resources effectively.
• Track and report project progress to senior management and key stakeholders.

2. Support Engineering & Operations Control:

• Collaborate with workshop operations teams to drive improvements in fleet maintenance operations.
• Develop and implement data-driven strategies to enhance operational performance, including efficiency, productivity, and resource utilization.
• Use data analytics and KPIs to monitor and evaluate the performance of maintenance processes.
• Assist in the development of dashboards and reporting tools to provide real-time insights into maintenance performance and equipment health.

3. Innovation & Continuous Improvement:

• Identify opportunities for innovation and process improvement in automotive maintenance operations.
• Stay up-to-date with the latest trends in automotive engineering and operations control to ensure the company remains competitive.

4. Stakeholder Collaboration:

• Work closely with internal teams (Engineering, Operations, IT, etc.) and external partners (vendors, subcontractors, etc.) to ensure alignment on project goals and execution.
• Engage with senior management to align project outcomes with business strategy.
• Provide technical guidance and support to the maintenance and operations teams.

5. Resource & Team Management:

• Lead training initiatives to ensure that teams are proficient in the latest tools and technologies related to automotive maintenance.

Key Qualifications:

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or related field.
• Minimum of 5-7 years of experience in automotive maintenance, project management, or engineering operations control, with at least 2 years in a managerial or supervisory role.
• Proven experience managing complex automotive maintenance projects. PMP or similar certification is advantageous.
• In-depth knowledge of automotive systems, fleet maintenance, and data analytics.
• Strong analytical skills and experience with data analysis tools to optimize operations.
• Experience implementing new technologies, driving process improvements, and promoting innovation.
• Strong written and verbal communication skills, with the ability to influence stakeholders and present data-driven insights.

Competencies:

• Strong problem-solving and critical thinking skills.
• Proactive approach to identifying and implementing solutions.
• Ability to manage multiple priorities and projects simultaneously.
• Ability to work effectively in a fast-paced and dynamic environment.

Working Conditions:

• Office-based with regular visits to automotive maintenance sites and operations centers.
• Occasional travel may be required to meet with external vendors and stakeholders.

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire Engineer, System Engineering . This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Type: One-year Renewable Contract

Roles and Responsibilities:

· Plan, execute, monitor and control the various technical aspect of the project.

· Manage or participate in new setup or upgrade of system/network infrastructure projects.

· Responsible for supporting operational systems satisfying contractual Service Level Agreement

· Perform and manage routine preventive maintenance and operational activities

· Provide project documentation and reports

· Diagnose and rectify technical issue

· Managing and Operating Red Hat Linux, Windows VM Infrastructure

· Installation/Configuration/Hardening/Maintenance/Patching

· Maintain System Security

· Advanced Troubleshooting

· Performance Tuning

· Capacity Management

· Preventive/Proactive Support

· Incident/Change/Problem Management

· Provide system administration support and guidance for development team’s app configuration tasks

· Veritas Clustering Setup on RHEL VM would be added advantage

· Chef Automation would be added advantage

· AWS EC2 maintenance

· Managing and Operating VMware vSphere IT infrastructure

Other IT Infrastructure Related Tasks

· Red Hat Enterprise Linux (RHEL) and Windows Administration

· Professional understanding of networking related to RHEL and Windows

· Professional understanding of SAN Storage related to RHEL and Windows

· AWS Certified Solution Architect will be an advantage

· Good understanding of large Data Center Facilities operation

· Hands-On experience supporting various Infrastructure agents like NetBackup

· (Mid-Level) vSphere 7.x.

· Cross-team collaboration with storage, network, security and application delivery

· Technical leadership quality to handle technical challenge and sensitive situations

· Integrate the server automation process either by custom scripts or via third-party solutions(Ansible)

· Candidate should have the drive and intellectual horsepower to resolve

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Deepa Shivakoti

Reg No: R1765546

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

Responsibilities:

Design, detailing, specification preparation and construction oversight for the full range of Mechanical packages for design and build of advanced technology and life science projects
Determining and defining sustainability targets;
Review of the design of Mechanical systems, produced by other team members, for technical compliance with specified and contracted client/customer requirements;
Formulating and driving any necessary recovery plans relating to Design,Cost &Schedule
Representing Mechanical Department in monthly HOD Meetings;
Performs monthly department meetings and provides a status update on development of projects and business development;
Informs and updates on latest technical developments and codes/ standards updates in the industry in regards to Mechanical engineering
Attend monthly HOD Meeting
Mentoring of the Lead Engineers with the intent of securing properly trained personnel to ensure the continual expansion of the company.
Establishes and updates individual competency profile for each team member;
Creates development and training plan for each direct report;
Actively manages performance (goals, action plans and key performance factors);
Establishes succession management planning;

Requirements:

Degree in Mechanical Engineering
At least 10 years of Design and Construction experience in a high-tech industry or other multiple discipline orientated construction business
Experience in implementing change strategies internally
Experience in strategic and operational planning and implementation
Experience in process and project management

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

• Identify, source, and procure spare parts and components for port equipment, machinery, and systems (e.g., cranes, container handling equipment, conveyor systems, etc.), ensuring availability when required.
• Establish and maintain relationships with suppliers, manufacturers, and service providers for spare parts. Negotiate contracts, prices, lead times, and terms of delivery to ensure the best value and timely delivery.
• Manage and optimize spare parts inventory, ensuring the right balance between stock levels and operational needs. This includes maintaining an inventory of critical spare parts for emergency repairs and routine maintenance.
• Develop and manage budgets for spare parts procurement, ensuring cost-effective purchasing while maintaining the required quality and reliability of parts.
• Ensure that all procured spare parts meet quality standards and regulatory requirements. This may involve working closely with engineers and technical teams to assess the specifications and compatibility of parts.
• Provide technical advice and support to maintenance teams, engineers, and other stakeholders on spare parts selection, technical specifications, and troubleshooting issues related to equipment and machinery.
• Maintain accurate records of procurement transactions, including purchase orders, invoices, delivery schedules, and warranty information. Generate reports on procurement activity, stock levels, and cost analysis for management review.
• Coordinate the logistics of spare parts delivery, ensuring timely arrival of parts, resolving any delays or issues with shipping, and ensuring parts are delivered to the appropriate locations (on-site or warehouses).
• Work closely with maintenance and engineering teams to forecast future spare parts needs based on equipment lifecycle, maintenance schedules, and operational demands. Develop long-term plans for parts procurement.
• Monitor supplier performance to ensure that they consistently meet company's requirements for lead time, quality, and service. Address any issues related to supplier delays, quality concerns, or failures to meet specifications.

Requirements:

• Higher NITEC / NITEC in Mechanical Technology or equivalent
• Minimum 3 years' experience in NDT works
• Possess NDT Level 2 Certificate in MPT
• Those with NDT Level 2 Certificate in UT and PT or welding experience will have an added advantage

Queenie Chua

R24125459

Royal IHC is currently recruiting a MARINE MECHANICAL ENGINEERING TECHNICIAN for our Singapore office.

Roles & Responsibilities:

• Maintenance and Repair: Perform routine maintenance and repairs on dredging equipment, including pumps and hydraulic systems, ensuring optimal performance and minimal downtime.
• Assembly and Disassembly: Assist in the assembly and disassembly of dredger components, adhering to safety and quality standards to ensure efficient operations.
• Troubleshooting and Diagnostics: Conduct thorough troubleshooting and diagnostic assessments on various dredger systems to identify and resolve mechanical issues promptly.
• Collaboration: Work closely with engineers and operators to develop and implement effective maintenance schedules and procedures.
• Workshop Maintenance: Maintain a clean and organized workshop environment, ensuring all tools and equipment are in proper working condition and readily available. Ensure the accuracy of the inventory stored in the workshop. Conduct safety inspections and ensure all maintenance activities comply with safety standards and regulations.
• Procurement Support: Support the procurement of spare parts and materials, maintaining inventory records and ensuring timely availability for repairs. Maintain accurate records of inventory and procurement activities.
• Documentation: Accurately document maintenance activities and repairs in accordance with company protocols and regulatory requirements.

Job Requirements:

• Proven Mi. 5 years of experience in marine mechanical engineering or Marine-Shipyard field.
• Strong troubleshooting and diagnostic skills.
• Ability to work collaboratively in a team environment.
• Excellent organizational and documentation skills.
• Positive mindset with a proactive, “sure I’ll get that done” attitude.

What We Offer:

• A dynamic and supportive work environment where your contributions matter.
• Opportunities for professional growth and development.
• Competitive salary and benefits package.

• Completing all types of tasks with speed and efficiency.
• Also the work should be explained clearly to the employees on site.
• If there is a delay in work at the workplace, the reasons should be identified and rectified immediately.
• Materials and equipment needed for work should be kept ready in advance.

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and Computer Science by US News Best Global Universities; and #8 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the College aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting place to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

We are looking for a highly motivated candidate to join our team as a Research Associate.

The Research Associate will work on a funded interdisciplinary grant at the intersection of graph data management, cognitive psychology, and data visualization to support the University’s research in data science. The project seeks to develop a novel data-driven framework for user-friendly visualization of property graph schemas that is informed by theories from cognitive psychology. The successful candidate will be responsible for developing it.

Key Responsibilities:

• Plan and develop effective abstraction and algorithms for visualisation of property graph schema.
• Assist in development of user-friendly and interactive interface for visualisation of property graphs.
• Liaise with various stakeholders.
• Contribute to the production of research reports.
• Contribute to the dissemination of research findings.
• Perform other tasks as required by the Principal Investigators.

Job Requirements:

• Preferably Master in computer engineering, Computer Science, Electronics Engineering or equivalent.
• Strong analytical and programming skills.
• Strong background in algorithms and data management.
• Experience using programming language such as JavaScript, TypeScript and Python
• Excellent organizational skills and able to work within given deadlines.
• Self-directed learner who effectively picks up relevant skills as needed.
• Excellent teamwork and verbal, written communication skills
• In-depth knowledge relevant to the project domain.
• Demonstrated capability to conduct innovative research.
• The ability and willingness to adapt and incorporate novel ideas and approaches in scientific industry.
• Ability to initiate collaboration research in multidisciplinary team.
• Oversee and report project progress.
• Ability and willingness to work some flexible hours.

We regret that only shortlisted candidates will be notified.

Job Highlights

• Career Development and Opportunities
• Duty Meals, Birthday Leave & Flexible benefits
• Complimentary Room Nights & Discounted Room Rates

We are looking for a Director of Engineering

Director of Engineering is overall in charge of maintenance operations of hotel facilities, electrical systems, kitchen equipment, emergency power system, and other related equipment in accordance with guest service, preventive maintenance and energy conservation standards and programs.

As a Director of Engineering, we rely on you to:

• Manages departmental operations expenses and prepare for annual budget & Capex,
• Ensure hotel ‘s facilities are MEP system in good working condition to support daily operation,
• Establish andimplement preventive maintenance program to achieve higher reliability and serviceability of hotel facilities,
• Plan and implement projects to improve plantefficiencyand reduce other operating & maintenance costs,
• Ensures systematic and cost-effective process ofoperating, maintaining,and upgrading ofassets,
• Identifies hazards& potential safetyconcerns and be accountable for Fire Life Safety in hotel,
• Ensures compliance with international standards and local authority requirement,
• To conduct training programs for team members in accordance with the requirement of Engineering Services Manual and Fire Life Safety Manual,
• Conduct Engineering and Fire Life Safety audits
• Perform other duties and responsibilities as outlined in the Engineering Services Manual and Fire Life Safety Manual or as directed by General Manager

We are looking for someone who:

• Degree in Engineering or relevant
• Minimum of five (5) years with advanced knowledge of building management/engineering experience in hospitality industry
• Hands on experience in hotel operations, repair and maintenance;
• Strong understanding of building life safety system and energy management systems.
• Strong Leadership qualities
• High levels of flexibility, adaptability to changes

If you are the right person, what are you waiting for? Click the APPLY button now!

The College of Computing & Data Science (CCDS) invites applications for the position of Research Assistant.

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and #6 for Computer Science by US News Best Global Universities; and #8 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the College aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting place to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

Key Responsibilities:

• To conduct research into the WebAssembly programming language.
• To produce publications in top conferences and journals.
• To offer assistance to any students involved in the project.
• To collaborate with industrial and academic partners.
• To perform any other duties related to the research program.

Job Requirements:

• Preferably Bachelor’s degree in Computer Engineering, Computer Science, Electronics Engineering or equivalent.
• Preferably have experience in interactive theorem proving and/or Web programming.
• Capable of handling multiple tasks across projects and research activities.
• Independent, highly analytical, proactive and a team player
• Excellent teamwork and verbal, written communication skills
• Proven research ability as evidenced through a portfolio of publications and/or conference papers and/or patents.
• In-depth knowledge relevant to the project domain.
• Demonstrated capability to conduct innovative research.
• The ability and willingness to adapt and incorporate novel ideas and approaches in scientific industry.
• Demonstrated ability to formulate hypothesis and design effective experimental plans.
• Ability to design and implement new experimental methods.
• High-level expertise in the required experiment or modelling methods.
• Good knowledge in laboratory works as well as engineering of prototype system.
• Ability to initiate collaboration research in multidisciplinary team.
• Oversee and report project progress.
• Ability and willingness to work some flexible hours.

We regret that only shortlisted candidates will be notified.

What you will do

• CPU Testing Binning Strategy & Realization
• Production volume ramp-up support which includes fast-turn-around test program delivery/optimization and cost reduction through yield optimization and test time reduction
• Cross collaboration with Design/DFT/DV/TE team to enable efficient test-case simulation and (mini)ATE bring-up

What you will bring

• Bachelor/Masters Degree in Electrical/Computer Engineering
• Min 7 years of CPU related Chip Mass Production Experience is a MUST.
• Software+Hardware Testing PCB built
• Familiarity with CPU Testing (ARM/MIPS/SNPS etc)
• Cross-site working experience is a MUST.
• Experience with Foundry, Post-Silicon, FPGA, DVT, SLT debug is a PLUS.
• Smart-Phone Adv. ASIC consumer product HW design experience is a PLUS.

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Key Responsibilities:

1. Installation, corrective maintenance, and fault finding of all equipment and systems carried out by the company.

2. Attending to service calls, developing sales of security systems and equipment, quoting, and securing projects.

3. Coordinating and assisting with projects secured by the company.

4. Performing any other work assigned by the management consistent with the company's objectives.

Requirements:

* Bachelor of Engineering in Electrical and Electronic Engineering.

* Strong problem-solving skills.

* Flexibility to work outside official hours if necessary.

Responsibilities

As an Engineering & Business Development Intern, you will be responsible for designing and presenting customised engineering systems to the company’s prospective clients and ensuring deliverables of the system. You will be contributing to the Engineering team in the following key areas:

Engineering:

• Understand the process of microtunneling and pipe jacking, and its supporting equipment supply scope, such as the automatic bentonite lubrication system, slurry management system, gyro navigation and more.

• Understand customers’ project requirements and assist in designing and proposing suitable systems/solutions.

• Support the engineering team in providing technical information to potential clients.

• Support the engineering team in ensuring all deliverables of the system are achieved during and after setup.

Business Development:

• Source new products that will help to enhance our product offerings and value-add (e.g. chemicals, new equipment or parts for relevant industries).

• Research on relevant engineering systems/solutions across the world and present applicable solutions for construction projects in Singapore and Southeast Asia.

Learning Outcomes and Objectives

• You will have the opportunity to learn and grow with an established SME with over 30 years of track record in microtunneling and a growing supply scope.

• You will enjoy the flexibility of working in a close-knit team of entrepreneurial individuals where everyone is empowered to share, implement and see the fruition of our ideas.

• Apart from applying engineering concepts in real life, you will also get practical hands-on experience in designing and engineering a system that will be put to good use.

• More importantly, with Business Development as part of the internship, you will also get to hone your leadership, communication and negotiation skills – which are essential skillsets for navigating today’s business world.

• Last but not least, we are looking for a self-motivated and entrepreneurial individual who is keen to learn and grow with an SME. Full-time position may be offered at the end of the internship.

Skills & Qualifications

• Students currently pursuing a Degree in Engineering (or related studies).

• Excellent command of written and spoken English and Mandarin.

• Resourceful, analytical and creative in problem solving.

• Strong engineering and technical knowledge.

• Team player with good leadership and organisational skills.

• Good interpersonal and communication skills.

• Able to handle outdoor environment.

• Class 3 driving licence will be useful.

The School of Chemistry, Chemical Engineeri​ng and Biotechnology (CCEB) invites applications for the position of Research Associate.

The Research Associate will take on a significant role in development of prototype optics/imaging system prototypes, under the SERI-NTU ADVANCED OCULAR ENGINEERING (STANCE) Program.

Key Responsibilities:

• Developing machine learning and deep learning models to address clinical challenges in ophthalmology.
• Conducting research on medical image processing and multimodal imaging using clinical systems and novel prototypes.
• Collaborating with NTU and SNEC/SERI researchers to align with research strategy and goals.
• Managing research projects and supervising students and research assistants.
• Publishing research outcomes in top-tier journals and presenting findings at academic conferences.
• Drafting reports and contributing to research management under the guidance of Principal Investigators.
• Ensuring compliance with health and safety protocols.

Job Requirements:

• Master’s degree in Computer Science, Computer Engineering, Electrical or Information Engineering, Biomedical Engineering, or related disciplines.
• Experience in Optical Coherence Tomography (OCT), software development, and OCT signal analysis is an advantage.
• Proficiency in programming and image processing tools (e.g., LabVIEW, MATLAB, Python).
• Ability to work independently and in a collaborative, cross-functional research team.

We regret that only shortlisted candidates will be notified.

The College of Computing & Data Science (CCDS) invites applications for the position of Research Associate.

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and #6 for Computer Science by US News Best Global Universities; and #8 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the College aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting place to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

Key Responsibilities:

• Responsible for maintaining git repositories
• Develop cloud systems
• Do experiments to measure and evaluate performance of cloud systems
• Read and write related academic papers

Job Requirements:

• Preferably Master in Computer Engineering, Computer Science, Electronics Engineering or equivalent.
• Independent, highly analytical, proactive and a team player
• Excellent teamwork and verbal, written communication skills
• Proven research ability as evidenced through a portfolio of publications and/or conference papers and/or patents.
• Preferably with programming skills of Python, Go and C++
• Demonstrated capability to conduct innovative research.
• The ability and willingness to adapt and incorporate novel ideas and approaches in scientific industry.
• Demonstrated ability to formulate hypothesis and design effective experimental plans.
• Ability to design and implement new experimental methods.
• High-level expertise in the required experiment or modelling methods.
• Good knowledge in laboratory works as well as engineering of prototype system.
• Ability to initiate collaboration research in multidisciplinary team.
• Oversee and report project progress.
• Ability and willingness to work some flexible hours.

We regret that only shortlisted candidates will be notified.

We are seeking a dynamic and experienced Sales Engineering Director to lead our team of sales engineers across the APAC region (8-10 team members). The person will be responsible for managing all facets of the sales engineering function.  These include leading the most important sales cycles, ensuring technical plus professional excellence along with the recruiting, development and leadership of a team of Sales Engineers.

In this role, you will drive the technical sales process, ensuring our sales engineers deliver exceptional support and demonstrate the value of our SaaS business intelligence solutions to prospective clients. You will collaborate closely with sales, product management, and customer success teams to maximize our impact in these regional markets and support our global growth strategy.

Your Focus

• Manage, mentor, and develop a high-performing team of sales engineers across the APAC region.

• Foster a culture of collaboration, innovation, and continuous learning.

• Partner with the sales team to understand customer needs and provide technical expertise during the sales cycle.

• Lead product demonstrations, proof of concepts, and technical presentations that effectively communicate the value of our solutions.

• Sales cycle leadership means personal involvement in the most important sales cycles in their assigned region to ensure the highest possibility of success. This may include individual contribution. 

• Stay updated on industry trends, competitive landscape, and our product capabilities to provide valuable insights and guidance.

• Assist in the creation of technical documentation, FAQs, and training materials for internal teams and customers.

• Work closely with product management and engineering teams to relay customer feedback and influence product roadmap decisions.

• Coordinate with marketing to ensure that technical materials are aligned with sales campaigns.

• Establish and monitor key performance indicators for the sales engineering team.

• Report on team performance, sales opportunities, and customer feedback to senior management.

• Engage with key customers and prospects to build relationships and understand their technical requirements.

• Support customer onboarding and implementation efforts as needed to ensure successful product adoption.

• Support Partners of MicroStrategy to identify and define joint opportunities. The individual will provide functional and technical advice, sales training and other in-person support to Partners on an as-needed basis.

• Advance the product knowledge of MicroStrategy Partners through education, training, skills transfer, and best practices.

Required Experience and Skills

• Demonstrable experience in a sales engineering management position with proven ability to lead and motivate a high-performing team in a fast-paced environment (8-10 team members).

• Strong previous experience in a Sales Engineering (Pre-sales) position, supporting sales cycles selling Business Intelligence or other high-value business solutions.

• Experience with BI tools (e.g., MicroStrategy, Tableau, PowerBI, Qlik, SAP Analytics Cloud, Quicksight, Business Objects, Cognos, Looker).

• Training in value-based selling (MEDDICC, Force Management, Demo to Win, etc.)

• Demonstrated sales success.

• SaaS and Cloud based selling with Hyperscalers and other partners (AWS, GCP, Azure).

• Excellent communication, presentation, and interpersonal skills.

• Strong problem-solving skills and the ability to think strategically.

• General knowledge of AI and prompt engineering.

• General knowledge of the BI and analytics market.

• Specific experience with MicroStrategy is a major plus.

• Experience with data modeling, data warehousing, data engineering, data integration

• SaaS and Cloud based selling with the main Hyperscalers (AWS, GCP, Azure).

• Familiarity with APAC markets and cultures, with fluency in English; additional languages are a plus.

• Ability to travel as required.

• Degree educated or equivalent (Computer Science or Information Technology).

About our group:

Our Facility team is dedicated to the operation and maintenance of various utility systems crucial for the round-the-clock operation of our high-tech manufacturing plant. We manage systems such as Chiller, Cooling Tower, Compressed Dried Air, Vacuum, Process Cooling Water, UPW, and HT/LT Electrical Installations, along with Cleanroom HVAC equipment. As a vital part of the organization, we contribute to the efficiency, reliability, sustainability, and innovation of our plant.

About the role - you will:

• Learn and contribute to the operation and control of various facility equipment/systems through the Facility Control Center using SCADA computer.
• Perform daily logging, update checklists, and engage in in-house preventive maintenance (PM) activities.
• Supervise vendor PM/repair work, ensuring adherence to Standard Operating Procedures.
• Schedule and track weekly/monthly PM activities and close computerized work orders upon completion.
• Respond promptly to facility system/equipment breakdowns, production-related issues and effectively to minimize downtime
• Monitor and evaluate equipment/system performance and capacity usage, providing regular reports to superiors for further review.
• Record and optimize the plant's water consumption.
• Track Cooling Tower water quality and water parameters for compliance with regulatory standards.
• Maintain records of equipment service reports for audit purposes.

About you:

• Self-initiative, positive attitude, and the ability to work well as a team member.
• Proactive, independent, and capable of working with minimal supervision and under pressure.
• Strong interpersonal and communication skills.
• Willingness to learn and contribute actively.
• Availability for rotating 12-hour shifts.
• Qualification: NITEC/Diploma in Mechanical/Electrical/I&C Engineering.

Your experience includes:

• Minimum 3 years of experience in Facility Operation and Maintenance in a semiconductor/wafer fab/electronic manufacturing plant.
• Hands-on experience and good knowledge of troubleshooting Electrical Distribution, Motor Control Center, VSD, ACMV systems, and Building Services.
• Computer skills in MS Office (Word, Excel, PowerPoint).

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our Recording Media Operations (RMO). Spread over three sites, it is easily accessible by Public Transport (bus/MRT). Ample free on-site parking lots are also available. Here at work, you can enjoy breakfast, lunch, dinner and snacks at our on-site canteen and nearby coffee shops. We offer a range of employee welfare facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities are also available at your choice of interest.

. Design & Details of Civil Structural Engineering Works

. Co-ordination with clients’ Representatives, Project Managers, Consultant Team and architect from inception to completion of projects

. Attend meetings during course of construction of projects

. Responsible for timely submission of reports and completion of projects for tender/submission with target dates.

. Responsible for on-site technical / engineering / administrative matters.

· To provide all relevant endorsements required by the relevant authorities

· Supervise all civil, structural and geotechnical building works, both permanent and temporary

· To ensure that contractor had obtained all necessary permits and clearance to work

· To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures

· To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc. for the works

· To review, evaluate and assess all formwork structure, formwork support systems of RC Structures and submit evaluation report endorsed by a PE.

· To review and supervise safety, environmental and health matters

· To supervise the installation of instrumentation

· To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations

· To review Contractor's design and supervise all works associated to underground works below 6m.

Requirements:

. Degree in Civil & Structural Engineering

· Qualified candidates please submit in your updated resume in MS Word format with your latest RTO cert or RE cert attached.

· At least 5 years’ of experience, of which 3 years’ experience in Substructure & Superstructure works or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

· Possess a valid RTO or RE by JAC of IES/ACES as QSS Singapore.

· Possess BCSS and/or confined space certificate.

· Should be willing to work 56 hours/week.

· Candidate to be able to work shift works due to the demands of the project.

. Candidate expected to work in a team, those who possess team work spirit is welcome to join.

Durapower Group take pride as a Singapore enterprise specialises in the design, manufacturing, and integration of lithium battery systems for automotive and energy storage systems

This role will oversee product management team and directly reporting to Director of Engineering. The person must be able to speak English and Mandarin as he or she will also collaborate closely with the Engineering staff in China.

The person will work closely with key stakeholders from strategic development and sales, engineering and production. This person shall be well versed in communication and coordination, strategic and organized personality, proactive, experienced and skilful in managing a team. Experienced in engineering and equipped with product management skills.

Roles & Responsibilities:

· Secure and confirm customer requirements and operational profiles to communicate effectively with R&D / plant engineers and ensure successful system integration with other vehicle components.

· Offer technical assistance to clients on existing and new projects and products. Ensure customer satisfaction.

· Assign ownership and manage the company Li-Ion battery product portfolio (Commercial EV and Marine) in providing fast technical-commercial proposal (support) to BD & sales team for pre-sales activities, for APAC, EU and US.

· Updated with market competitors’ capability on product benchmarking, working closely with R&D and engineering team in Singapore and China team to achieve strategic goals.

· Working closely with Strategic Development and Engineering Director in market – product penetration, product development roadmap, in securing market leading position with right technology, right cost (ROI) and right timing, through strategic partnership and/or organic growth. Strategize cost reduction efforts with engineering, procurements and all functions to ensure competitive price.

· Achieve product standardization with core segmentation to achieve stronger product brands, better economic of scale and technological improvement.

· As the product manager/owner to manage product brochures, product manual, BOM, Spare Parts and maintenance, and to secure customer testing / certification requirements for their applications/region.

· Liaise with customers (BD/sales manager), work with PMO team and engineering / manufacturing plant to support ongoing projects as gate keeper.

· Communicate design change requests, design issues and potential optimization of battery systems to appropriate product engineering and manufacturing teams.

· Train customers and colleagues on Durapower products and applications where applicable.

· Maintain proper organization and documentation for different projects and product portfolio and ensure proper record keeping.

· Proven leadership in managing and leading product management team of multinational.

· Manage team capability to provide Engineering Field Support (as when needed). Compile field failure from Aftersales to implement CIP.

Requirements:

· Degree/Masters or Phd. in Electrical Electronics, Mechatronics, Automotive or Mechanical Engineering.

· Experienced product manager with total 8 - 13 years’ experience in development or application engineering, or system integration and product management, preferably in the space of mobility or electrification.

· Inclusive 3 – 8 years of experience in product management portfolio in mobility or electrification industry preferably with APAC, EU or US markets.

· Knowledge of Singapore and regional electrical standards, global vehicle standards and basic safety requirements.

· Proficiency in Microsoft Office (Word, Excel, PowerPoint).

· Bilingual in English and Mandarin, as the role requires close collaboration with our engineering team in China.

· Can-do attitude, and high EQ to manage customer relationships, and key stakeholders from strategic BD team, engineering team and PMO team.

· Experience working with technical – sales/BD performance related KPI.

· Work location based in SG, willing to travel on demand basis.

Responsibilities:

• Assembling, evaluating, testing, and maintaining electrical or electronic wiring, equipment, appliances, and apparatus.
• Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus.
• Constructing and fabricating parts, using hand tools and specifications.
• Reading and interpreting electrical and electronic circuit blueprints, diagrams, and schematics.
• Advising management on continued use of unsuitable equipment, appliances, and apparatus.
• Supervising electricians.
• Ordering of electrical supplies and equipment.

Requirements:

• Completion of an electrical apprenticeship.
• At least 2 years' experience as an Electrical Engineering Technician.
• Excellent problem-solving skills.
• Good communication skills.
• Experience operating hand and power tools, soldering and fault-testing equipment.
• Able to work on weekend and public holiday.

Overview:

As a Power BI reporting Lead (Sr Cons, Data Engineering), you will spearhead our efforts to transform and elevate our data visualization and reporting capabilities. Your expertise in Power BI, coupled with your experience in report migration, will be instrumental in guiding our organization through the transition from various platforms to Power BI. You will lead a team dedicated to creating insightful, dynamic reports and dashboards that empower decision-makers with real-time data.

Key Responsibilities:

• Design, develop, and maintain advanced Power BI reports and dashboards.
• Lead the migration of reports from other BI tools (such as Tableau, Qlik, Excel, etc.) to Power BI, ensuring accuracy, efficiency, and minimal disruption to business operations.
• Work closely with business stakeholders to understand their data visualization needs and translate business requirements into technical specifications.
• Establish and enforce best practices for Power BI report development, including data modeling, data blending, and visualizations.
• Provide technical leadership and guidance to the Power BI team, including training and mentorship.
• Collaborate with IT and data management teams to ensure seamless data integration and compliance with data governance standards.
• Stay abreast of the latest Power BI features and updates, evaluating and implementing them to enhance our reporting capabilities.
• Manage the Power BI service, including workspace administration, report publishing, and user access management.
• Conduct performance tuning and optimization of Power BI reports to ensure fast load times and a smooth user experience.
• Document all report migration processes and develop guidelines for future migrations.

Required Skills and Qualifications:

• Bachelor’s degree in computer science, Information Technology, Data Analytics, or a related field.
• Minimum of 8 years of experience in data analysis and report development, with at least 5 years focused on Power BI.
• Proven experience in migrating reports from other BI platforms to Power BI, including knowledge of different migration tools and techniques.
• Strong understanding of data modeling, SQL, and DAX.
• Excellent analytical and problem-solving skills, with the ability to work on complex issues where analysis of situations or data requires an in-depth evaluation of variable factors.
• Demonstrated ability to lead and mentor a team of analysts or developers.
• Excellent communication and interpersonal skills, with the ability to interact effectively with all levels of the organization.
• Experience with data governance and compliance requirements.
• Familiarity with Power BI administration and workspace management.

Preferred Skills and Qualifications:

• Certification in Power BI or other relevant BI tools.
• Experience with cloud data platforms (e.g., Azure, AWS, Google Cloud).
• Knowledge of Python or R for data analysis and visualization.

Job Scope:

• Plan, coordinate, and oversee engineering projects from inception to completion
• Collaborate with stakeholders, including clients, architects, and contractors
• Develop project schedules, budgets, and resource allocations
• Conduct feasibility studies and risk assessments
• Prepare and review technical documentation, reports, and specifications
• Monitor project progress and ensure compliance with quality and safety standards
• Troubleshoot issues and implement solutions to keep projects on track
• Facilitate communication between teams and manage project meetings
• Ensure adherence to project timelines and budgets
• Provide technical support and guidance to project teams

Requirements:

• Degree or Diploma in Civil/Structural Engineering
• Minimum 2 years of experience in structural steelwork
• Assist the Project Manager with project scheduling, site coordination, and submissions of method statements and risk assessments

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.