• Reports to the Safety Manager
• Implement and monitor site HSE management system
• Support management in safety-related matters
• Ensuring compliance to regulatory and corporate HSE policy and requirements by conducting regular inspection and internal audits
• Pro-active to lead incident investigation, address the control measures and ensure that all incidents report is made in a timely manner.
• Oversee of all general activities with regards to HSE and Implementation of Health, Safety and Environment (HSE) rules, regulations and procedures of the company.
• Ensure that relevant HSE documents, reports, communications and other requirements of HSE are kept properly in place.
• Ensure HSE is in compliance to ISO
• Compile reports and presentation slide for management reporting

Job requirements:

• Minimum NITEC Certificate, candidates with Engineering studies would be an added advantage
• Minimum 2 years’ experience in similar role, preferably in LTA projects
• Experience in Civil road works and heavy lifting matters is a must
• Attained Advance Certificate in WSH Level B
• Attained Manage Work at Height
• Attained Confine Space Assessor Course
• Proficient in MS office, IT savvy (Google forms etc)
• Location : Woodlands
• Project : Viaducts

• Report to Precast yard Manager
• Responsible for All Precast segments casting work
• Responsible Precast Mould Assembly
• Profiling of Precast Segment Rebar and Post Tensioning Duct
• Preparation of Pre and Post Tensioning Calculation
• Ensure the quality of work as per the approved standard
• Assure that work is done according to safety work practices
• Post Tensioning Duct Layout and Profile works
• Coordinate with site Engineer and supervisor
• Assist with Senior Engineer and attend internal meetings

Job Requirements:

• Degree in Civil Engineering or equivalent
• At least 2 years of experience in civil engineering projects, inclusive of relevant experience in precast yard or fabrication yard
• Experienced in the fabrication of segmental box girder for viaduct, precast mould assembly & repair, and/or similar projects is preferred
• Knowledgeable on the applicable standards for the casting works
• Location :Woodlands
• Project : Viaducts

Responsibilities:

• Managed MOM EPOL and WPOL Systems - Handled all workers' Work Permit, Skilled and Employment Pass applications, renewals and cancellations in a timely manner.
• Follows up on purchase or cancellation of workers’ bond guarantees; Updating and maintaining PCP (Primary Care Plan System) data system
• Administration for : renewal of Foreign Worker Medical Insurance and Work Injury Compensation Insurance, checking premium rates and furnishing documentations, passport renewals for all workers, Prepare Employment Contract for all work permit holders
• Administers MYE application and related matters;
• Handle home leave and new application of foreign workers (Eg, seeks the necessary approvals, purchasing of air ticket for workers, Submission of ICA SG Arrival Card and Health Declaration etc)
• Submission of foreign worker levy waiver to MOM, Filing of IRAS Tax Clearance
• Maintains and updates workers records in Database, HR and personal files;
• Assists in workers’ sick leave and medical claims matters (Eg, verification of bills, follow up with hospitals on charges, etc)
• Handles worker dormitory matters (Eg, Dormitory Licence, Liaison with MOM Offices, Safe@ Dorm System etc)
• Handled CET Training and Training courses registration and administrations for all workers, transport arrangement, always remind workers to attend training
• BCA CWRS - Handled all workers Coretrade renewals / application for Direct R1 Lower Levy Scheme
• submit documentations for renewal of RE, RTO, REO, RES, etc.
• Performs any other duties as assigned.

Requirements

• At least a Diploma Qualification with minimum 2 years of HR experience.
• Able to start immediately or with short notice period is preferred.
• Good knowledge of Singapore Employment Act and Statutory rules and regulations.
• Experienced working in the Construction sector is an added advantage.

Job Summary: As an Assistant Enigneering Manager in our organisation, you will play a crucial leading role in the product development process. You need to lead team for designing and developing new products, improving existing ones, and ensuring that our products meet the highest quality standards. This position offers an exciting opportunity to work on cutting-edge projects and contribute to the growth and success of our company.

Key Responsibilities:

1. Product Design: Collaborate with cross-functional teams to conceptualize and design new products or product improvements, taking into account functionality, manufacturability, and cost-effectiveness.

2. CAD Modelling: Utilize computer-aided design (CAD) software to create detailed 2D and 3D models of product designs, ensuring precision and accuracy.

3. Prototyping: Oversee the development of prototypes and conduct testing and analysis to validate design concepts and make necessary adjustments.

4. Material Selection: Evaluate and select appropriate materials for product components, considering factors such as durability, cost, and performance.

5. Quality Assurance: Work closely with quality control teams to establish and maintain quality standards for products, ensuring they meet industry regulations and customer requirements.

6. Cost Optimization: Continuously seek opportunities to reduce production costs while maintaining product quality and performance.

7. Documentation: Prepare comprehensive design documentation, including drawings, specifications, and reports, to facilitate the manufacturing process.

8. Collaboration: Collaborate with other engineers, project managers, and stakeholders to ensure effective communication and coordination throughout the product development lifecycle.

Qualifications:

• Bachelor's degree in Mechanical Engineering or a related field.

• At least 5 to 8 years of proven experience as a Design Engineer in a manufacturing environment.

• Proficiency in CAD software (e.g., SolidWorks, AutoCAD).

• Strong analytical and problem-solving skills.

• Knowledge of materials, manufacturing processes, and quality standards.

• Excellent communication and teamwork abilities.

• Ability to manage multiple projects and prioritize tasks effectively.

About our group:

MDW – Automation Servo writer team is responsible for maintaining product downtime & quality, and manufacturing uptime. You will be working with some of the world-class technologies and equipment to certify the recording media for any physical and magnetic defects before being assembled into hard disk.

About the role – you will:

• Maintain the robot downtime ,safety hazards reduction and cost saving projects
• Provide support to Maintenance and Manufacturing for smooth running of production lines
• Monitor product performance status,5S and monthly PM
• Support the product engineers on engineering experiment and software evaluations
• Duties also include monitoring line issue and yield

About you:

• A good team player with positive attitude and self-initiative
• Good interpersonal, analytical, problem-solving and communication skills
• Able and willing to work in Shift Type: 12-hour Night Shift

Your experience includes:

• Working in electronic industry

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass transportation to work. Here at work, you can enjoy breakfast, lunch, dinner, and snacks at our onsite canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound.

About Our Group:

Sputter Control Build Operation is a function that Service/Deliver Control Build Assemblies for sputter machines usage. It has fixed team employees running 12 hrs shift pattern. Each Team has one leader & several IDLS performing Controller Build Assemble disassemble/Cleaning/Reassemble/QA buy off/Delivery to line.

About the Role - You will

• Perform sputter assembly rebuild according to procedures to support line operations
• Perform sputter assembly overhaul maintenance to prevent assembly premature failures
• Perform inventory check for all components used in sputter assembly
• Perform failure analysis together with equipment engineers to improve assembly robustness, reduce failure rate and maintain quality
• Responsible for proper tracking of failure components and compliance of procedure
• Involving in projects with relevant parties

About You

• A good team player with positive attitude and self-initiative
• Willing to work in a Cleanroom Environment
• Able and willing to work in Shift Type: 12-hour Shift

Your Experience Includes

• Troubleshooting & failure analysis
• Rebuild & assembly compliance to procedures or standards
• Tracking of evaluations, failures, and phase-in

Location

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass transportation to work. Here at work, you can enjoy breakfast, lunch, dinner, and snacks at our onsite canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound.

We are a manufacturer of fasteners catering to the Construction, Industrial, and Oil & Gas industries. Founded in 2000, we are the only fastener manufacturer from Asia that provides premium fastening solutions globally.

As our Business Development Manager, you will be responsible for the success of this company’s business development department. You will set goals for the team and produce regular forecast reports on how well your team is doing in achieving targets and budgets. You will be a high-performing manager to help us meet our customer acquisition and revenue growth targets by maintaining competitiveness and adopting innovative approaches to achieve targets. You will be responsible for maximising your department’s sales potential, crafting sales plans and justifying these plans to the management.

You and your team will be responsible for the recruitment and establishment of strategic distribution partners in line with the company’s vision for growth. Your task will be to find, select, and develop new strategic partners across designated territories and industries globally. Also, managing and developing current export wholesale sales while also identifying and developing new business opportunities within a global marketplace to expand the distribution business. This position will require you and the team to adopt an immersive proactive approach to maintaining an excellent working relationship with customers/distributors and finding new growth opportunities. You must have excellent organizational and communication skills with a high level of motivation not only to achieve the sales growth targets of the company's products but also to motivate your team to achieve of targets. Experience in distributor management and influencing demand growth is essential to generate new opportunities while being the primary point of call for your customers. You should be able to demonstrate a proven successful track record in sales and business development and account management.

As a Business Development Manager, you and your team will be the Company’s face to the international market and will represent the Company to end-users, distributors, and specifying consultants. The primary task of the team you will be managing is the acquisition, growth, and expansion of sales revenue and profitability. You and your team will maximize the Company’s accounts (target, new & existing) by partnering with them in assigned territories to direct clients towards the Company’s solutions. This includes all product lines to increase sales and market share. In addition, you will be responsible for developing and strengthening primary and secondary relationships at all levels to establish our brands as the first choice for clients and influencers resulting in an overall increase in sales and market share. You will lead and train your team with persuasive steps in the sales process including qualifying, specifying, relationship building, evaluation, solution development, presentation, and strong closing.

The Business Development Manager is expected to leverage materials, training, and support available from the company to achieve its objectives. A Business Development Manager is also expected to implement sales and marketing programs for his team and distributors by developing field sales action plans while he continuously updates himself with supply, demand, changing trends, economic indicators, and competitors. He shall manage his team and his distributors by providing them with the appropriate directions such that, as a team, the Company’s growth targets are achieved.

Responsibilities

· Plan, establish, communicate, and transmit sales objectives to your team or distributors by forecasting and developing annual sales quotas for territories

· Projecting expected sales volume and profit for existing and new products & markets

· Achieving and exceeding sales and profit targets, and reaching targets and goals set for assigned territories with your team

· Strategise, plan, execute, control and review team sales activities by developing field sales action plan for your team members or distributors

· Establish, evaluate, and adjust selling prices by monitoring costs, competition, supply and demand

· Manage your team or distributors by planning, scheduling and assigning them on all sales and marketing-related activities

· Recruit, select, orientate, train, counsel, discipline, monitor and appraise your team on their job performance

· Maintain professional and technical knowledge by attending educational workshops, reviewing professional publications, carrying out own research and study, establishing personal networks and participating in professional networks

· Establishing, maintaining and expanding the customer base while servicing the needs of your existing customers

· Contribute to team effort by achieving other corporate targets and objectives

Requirements

· Analytical Ability

o The Business Development Manager will receive all kinds of information – from verifiable facts to rumours. It is important that he can see the relevance of these bits of information, draw conclusions that fit the facts, and analyse a problem to understand its root causes.

· Judgement

o Having analysed the available information, he must then judicially weigh the evidence to decide on the best course of action. Most decisions involve a balance of advantages and disadvantages.

· Communication

o What is clear to the Business Development Manager must be made clear to others. A Business Development Manager should ask himself what each individual needs to know and why, and what reaction he expects from them.

· Ability to Attain Targets

o A Business Development Manager ought to be able to reach goals within the given timeline. He must know what to do when performance deviates from plan, and how he should execute corrective measures.

· Ability to Get Things Done

o A Business Development Manager should be a good objective setter, planner, controller and most importantly an excellent executor. Instead of leaving loose ends hanging, they always finish what they started.

· Cooperation

o A Business Development Manager should work with others in a friendly, cooperative manner, and inspire others to collaborate.

· Initiative

o A self-starter who is able to work with minimum direction is a necessary attribute of a Business Development Manager. In addition, he is expected to possess the desire and ability to develop constructive ideas.

· Dependability

o Strong Business Development Manager is dependable, thorough, and precise in everything they undertake.

· Smart Selection of People

o While establishing a relevant network helps with the job, he is also expected to be selective in choosing those networks and who he recruits; such that he surrounds himself with good people who may directly or indirectly bring good to the business.

· Delegation

o Possess the ability to produce results through others, as well as by himself, but definitely not trying to do it all by himself.

· Planning & Organising

o A strong Business Development Manager writes objectives and plans in detail about how they will be attained. They also anticipate problems and outline how they will be overcome.

· Vision

o He must be able to look well ahead be a good forecaster and consider future opportunities and problems.

· Creativity

o A Business Development Manager generates ideas frequently and is always working out ways and means of “doing it better”.

· Embodying the Company

o Absolute loyalty under all conditions. “Sell” the Company’s value, rather than “tell” them.

· Human Relations

o Possess the desire to develop from a boss of a team to a genuine leader and ensure that people enjoy working for/with them and demonstrate good team building skills.

· Ability to Develop Subordinates

o He shall always practice what he preaches and lead charismatically with such an example that his teams are fully convinced and motivated to follow him.

· Problem Solving

o He should be a positive thinker who can swiftly pinpoint problems, come up with solutions, and get the action going.

· Technical Knowledge

o He should possess exceptional understanding in his area of products and markets, and he should continuously strive to improve that knowledge and keep up to date.

· Common Sense

o A strong Business Development Manager approaches situations maturely and demonstrates a great deal of common sense.

· Enthusiasm

o He should possess a zest for the job – smiles easily and has a positive, eager, and responsive attitude.

· Ability to Work Under Pressure

o The best Business Development Manager maintains a positive attitude and zeal even when the going is tough. This is a must for this job, especially when he is required to lead a team with high-pressure quotas.

Sounds like a lot, but we are also a fun bunch and a growing family operating in a niche yet profitable market.

Salary Range: S$ 60,000 to S$ 72,000 per annum

Vehicle: S$ 350.00 max. fuel claims (where applicable)

Probation: Max. 6 months

Max. +10% of basic salary upon confirmation

Leave: Annual leave of 12 days (Max. 14 days)

Outpatient leave, max. 14 days /annum

Hospitalisation leave, max. of 60 days /annum

Benefits: S$ 200.00 /annum outpatient claims

S$ 200.00 /annum dental claims

Additional hospital and injury insurance

Travel Insurance

Bonus:

ASA – Annual Salary Adjustment subject to appraisal results

AWS - Not eligible

VBP - Variable Bonus Payout (VBP) will be calculated against your prevailing per annum salary.

JOB DESCRIPTIONS:

• Prepare project tender submission including bills of quantities, check tender drawing, material specifications, prepare and submit the P&S plan, shop drawing, & other required documents.
• Liaise with Managers, Team Members, Customers, Sub-Contractors and Suppliers. 
• Perform other duties as assigned.

REQUIREMENTS:

• NiTEC / Diploma and above in Electrical Engineering or equivalent.
• Minimum 1 years of working experience in related construction field. 
• Able to work independently with minimum guidance and under pressure to meet tight schedules.  Good team player with strong interpersonal and communication skills. 
• Proficiency in AutoCAD. 
• Able to start work immediately is an advantage.

• Reports to Planning Manager
• Responsible for planning the overall project schedule
• Review and monitor the progress of the project in production, delivery, and installation of Precast Segmental/Method bridge/Advance works associated with Road Diversion/Utility Diversion
• Manage overall program, review, report, and monitor the schedule to identify risks and control project
• Coordinate with clients & report the reason for delay, potential risks, and mitigation measures in consideration of understanding the overall work sequence with planned resources

Job requirements:

• Degree in Civil Engineering or equivalent
• Minimum 5 years of relevant experience for infrastructure projects
• Experience in design & construction of At-grade road widening including all associated junction improvements and realignment/reconstruction of its associated slip and service roads
• Experience in design & construction of new vehicular viaduct structures, ramps & other road bridge-related works.
• Familiar with all stages of the development cycle for LTA Design and Build projects.
• Proficient in Primavera P6 (mandatory), Ms Office, Autocad
• Location : Woodlands
• Project : Viaducts

Job Description

We are looking for a reliable Office Admin Executive, and the ideal candidate will be competent in prioritizing and working with little supervision, resourceful, reliable, dependable and trustworthy.

Responsibilities

1. Provide administrative support to Director and colleagues as required in a timely, proactive and diligent manner.
2. Coordinate office activities and operations to secure efficiency and compliance to company processes and procedures.
3. Manage filing system, phone calls and correspondences.
4. Support in HR, bookkeeping and invoicing.
5. Perform and maintain office & project records and databases.
6. Manage inventory and procurement of office supplies.
7. Assist colleagues where necessary, and other general administrative duties/tasks.

Skills

1. Proven experience as office administrator or relevant role.
2. Outstanding communication and interpersonal abilities.
3. Excellent organizational and leadership skills.
4. Familiar with office management procedures and basic accounting principles.
5. Excellent knowledge of MS Office and office management software.
6. Qualifications in secretarial and office administration studies is preferred.
7. Experience in construction industry will be an advantage.

Job Responsibilities:

• Coordinate and Monitor progress, quality of worksmanship and compliance with contract requirements.
• Ensure proper housekeeping and safety provision at site working area for workers to carry out tasks.
• Assist in manpower and resource scheduling and deployment, daily man-hours returns and coordinate in all aspects of site issues.
• Co-ordinate and monitor the availability and on time delivery of materials / equipment to complete the construction work within schedule.
• Supervision of work and ensure work done in accordance with specification and quality requirements.
• Full-Time position

Job Requirement:

• Preferred relevant working experience in Singapore (others relevant experience can be discussed )
• 2-5 years of working experience in related works
• Experience with Project Management, Safety and Health Management, and Risk Management Manager is added advantage
• Abe to work independently, and manage a team of workers.
• Must be hands-on, daily inspect the site works, and ensure projects completion on time
• Class 3 driving license preferred
• Good project management skills, excellent communication and coordination skills and great conceptualization and presentation skills will be helpful though not necessary.

About the job

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add a Quality Engineer (QMS) in Singapore. The position is based in our Univac Site at Woodlands.

As a Quality Engineer (QMS), you will:

Support the Quality Manager to establish & maintain an effective and best-in-class quality management system & processes in compliance to 21CFR Part 820 QSR, ISO 13485 & ISO 9001 Quality Management System standards, and meeting customers as well as relevant statutory & medical device regulatory requirements.

The key roles and responsibilities are as below:

• Establish, implement, and maintain quality systems in accordance with ISO standards such as ISO 13485, ISO 9001, ISO 14001, and FDA 21 CFR Part 820.
• Develop and manage internal audits and audit schedules; lead a team of auditors to ensure compliance with FDA 21 CFR Part 820 and ISO 13485.
• Promote continuous improvement in all aspects of quality matters.
• Optimize site processes to ensure high performance.
• Oversee document control functions.
• Manage operational efficiency through proactive oversight of the CAPA process.
• Initiate programs to standardize training and increase efficiency.
• Manage external audits conducted by certification bodies, regulatory agencies, or customers.
• Prepare executive presentations for management review.
• Perform any other tasks as assigned.

What skills and experiences are we looking for?

• Diploma and/or Degree in any technical disciplines with at least 3 years of QA/QC working experience in a medical related industry.
• Familiar with the Quality Management Systems requirements such as ISO9001, ISO13485, and 21CFR Part 820 QSR preferred.
• Knowledge in IATF16949 will be an advantage.
• Excellent analytical, presentation, written and verbal communication abilities.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Venture Family.

---- Communication will be extended to candidates who have successfully advanced in the selection process ----

About the job

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Alliance Manager in Singapore. The position is based in our Univac Site at Woodlands.

As an Alliance Manager, you will:

Responsible for developing and managing strategic partnerships with external organizations. This role will require collaboration with cross-functional teams, including sales, marketing, product development, and legal, to drive joint initiatives that result in revenue growth and expanded market reach.

The key roles and responsibilities are as below:

• Identify and evaluate potential alliance partners that align with the company's strategic goals and objectives.
• Develop and maintain relationships with key stakeholders at partner organizations, including executive-level contacts, to drive successful collaborations.
• Negotiate partnership agreements and contracts that define the terms and scope of the alliance.
• Facilitate communication and collaboration between internal teams and external partners to execute joint initiatives.
• Track and report on the progress and success of partnerships, including metrics such as revenue growth, market share, and customer acquisition.
• Ensure compliance with legal and regulatory requirements related to partnerships.
• Continuously assess and improve partnership programs and processes to drive better outcomes and greater efficiencies.
• Keep abreast of industry trends, competitive landscape, and emerging technologies that may impact the company's partnerships.
• Participate in customers request for information (RFI), request for quote (RFQ), and request for proposal (RFP) activities.
• Work with internal and external parties to gather necessary information required for RFQ process and analyse the data to ensure accurate quotes are provided meeting company targets.

What skills and experiences are we looking for?

• Degree in Business Administration, Marketing, and/or any equivalent faculty.
• Minimum 5 years of experience in alliance management and business development.
• Demonstrated ability to establish and maintain successful partnerships with external organizations.
• Good negotiation and contract management skills.
• Excellent communication and interpersonal skills, with the ability to build rapport and influence at all levels of an organization.
• Analytical and strategic thinking skills, with the ability to identify and evaluate opportunities and make data-driven decisions.
• Knowledge of industry trends, competitive landscape, and emerging technologies.
• Experience working in a fast-paced, dynamic environment with competing priorities and deadlines.
• Ability to travel domestically and internationally as needed.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Venture Family.

---- Communication will be extended to candidates who have successfully advanced in the selection process ----

Job Description & Requirements

We are looking for a Driver to transport our workers and materials in a comfortable, safe and timely manner.

Driver responsibilities include arranging regular cleaning and maintenance services for the vehicle, planning each route based on road and traffic conditions and managing payments.

To be considered for this role, you should have a valid driver’s license and a clean driving record with no traffic violations.

Driver responsibilities include:

• Transport contrsuction materials in a safe and efficient matters to destinations around singapore
• Maintaining the vehicle safe and clean
• Using navigation apps to determine the best route

Responsibilities

• Map out driving routes ahead of time to determine the most expedient trip
• Collect payments and issue receipts
• Listen to traffic and weather reports to stay up-to-date on road conditions
• Adjust the route to avoid heavy traffic or road constructions, as needed
• 
  

Requirements and skills

• Proven experience as a Driver
• A valid driver’s license
• Class 4 driving license
• A clean driving record
• Familiarity with GPS devices
• Knowledge of area roads and neighborhoods
• Availability to occasionally take weekend and night shifts
• Ability to remain calm in stressful driving situations (e.g. at rush hour)

Job Description

• Update the records to process account payable and petty cash.
• Review AP aging, report of exception matter (if any).
• Reconcile vendors’ SOA to our accounting record (at least for major suppliers.
• Update records of account receivables.
• Prepare general ledger in time for audit schedule assigned.
• Small entities monthly and yearly closing.
• Handling the full set of accounts for small entities.
• Assist in preparation for GST return, corporate income tax return, ECI.
• Assist in quarterly or half yearly and financial year end stock take conducted by finance dept.
• Assist to prepare stock take variance report for superior to review.

Requirement

• At least 3 years of relevant experience of related field.

1. Testing and Evaluation: Conducting tests on automotive components, systems, and vehicles to evaluate performance, efficiency, and safety.
2. Diagnosis and Troubleshooting: Identifying and diagnosing mechanical and electrical problems in vehicles using diagnostic equipment and tools.
3. Maintenance and Repair: Performing routine maintenance tasks such as oil changes, tire rotations, and brake inspections, as well as repairing or replacing faulty parts.
4. Prototype Development: Assisting in the development and testing of prototype vehicles, components, or systems.
5. Data Analysis: Analyzing test data and performance metrics to identify trends, patterns, and areas for improvement.
6. Documentation: Maintaining accurate records of tests, repairs, and maintenance activities, as well as creating reports and documentation for internal and external stakeholders.
7. Collaboration: Working closely with engineers, designers, and other technicians to develop, implement, and improve automotive systems and technologies.
8. Compliance and Regulation: Ensuring that vehicles and components meet regulatory standards and safety requirements set by government agencies and industry organizations.
9. Equipment Maintenance: Calibrating and maintaining test equipment, tools, and machinery to ensure accuracy and reliability.
10. Safety Procedures: Adhering to safety protocols and guidelines to prevent accidents and injuries in the workplace.
11. Continuous Learning: Staying updated on advancements in automotive technology, industry trends, and best practices through training, workshops, and self-directed learning.
12. Customer Service: Providing assistance and support to customers, dealerships, and service centers by addressing inquiries, explaining repairs, and offering recommendations.

Jod Description

• Coordinate and follow up on outstanding purchase order, delivery schedule and supplier payments.
• Maintain accurate suppliers list, record of purchase and product prices.
• Liaise with suppliers and internal staff for procurement and related matters.
• Any other ad-hoc or administration matters assigned.

Job Requirement

• At least 1 year of experience in admin or related functions.
• Meticulous and good communication skill.
• Good negotiation skill.

• Reports to Construction Manager
• Preparation of detailed schedule and monitoring the progress closely to ensure on-time completion
• Prepare detailed method statements and relevant documents
• Coordinate between client, sub-contractor(vendors), suppliers and internal team
• Attend the meeting with the stakeholders
• Generate and handle company reports, meetings, and documents required
• Propose alternative work method or other way to increase productivity
• Handle technical and engineering issue
• Ensure the activities comply with the quality, environment, health & safety requirements

Job requirements:

• Bachelor’s Degree in Civil engineering or equivalent
• At least 2 years’ experience in the construction & supervision of vehicular structures and road projects preferably with LTA infrastructure projects
• Should have technical expertise and knowledge in Civil Engineering Construction especially in foundation, structural, ERSS and viaduct
• Proficient in Microsoft Office and AutoCAD
• Attained CSCPM/BCSS, Work At Height, confined space certification would be an advantage
• Good interpersonal skills
• Hardworking and willing to learn
• Project : Viaducts
• Location : Woodlands

• Report to Construction Manager and lead the team/site works during his absence.
• Prepare & review detailed schedule for the site team to follow accordingly and for on-time completion
• Prepare & review detailed method statements and work instructions.
• Coordinate all related construction matters with subcontractor/consultant/client.
• Prepare & review company reports and documents
• Responsible & resolve technical and claim issues
• Assess subcontractors’ work activities against performance expectation
• Ensure compliance with quality, environment, health & safety requirements.

Job requirements:

• Degree in Civil Engineering or equivalent
• Minimum 6 years of relevant experience, inclusive of at least 3 years as Deputy Construction manager level, managing construction teams for complex vehicular structures and road projects of similar scale and complexity
• Candidate with LTA viaduct experience is preferred
• Well experienced in Bored piling, CBP, ERSS, RCBC Drain Box, Grouting, etc.
• Knowledgeable with various Utilities, M&E works
• Proficient in MS Office and knowledge on AutoCAD is at an advantage
• Attained trade certificate such as CSCPM/BCSS/Confined Space/Work at height
• Good interpersonal skills
• Self-motivated, independent individual and possesses great initiatives
• A team leader
• Location : Woodlands
• Project : Viaduct

Summary of the Job:

· To increase Contract Management Services Group (CMSG) revenue

year on year

· To foster profitable long-term relationships with customer.

· A problem solver for clients to roll out RFQ and SO successfully

Job Responsibilities:

· Responsible for researching and developing marketing opportunities

and planning and implementing new sales plans to increase CMSG

Sales revenue.

· Seek new project opportunities with existing customers

· Prepare & lead Company presentation and RFQ presentation on

Concept, Cost, Price

· Manage customer expectations comprising Bill of materials changes

such as additional or removal of parts request, unclear specification,

quick turn rework, assessing ECN implementation, KPI measurements

and erractic changes to PO such as push-out, cancellation & pull-in.

· Manage Customer Master Agreement for Management approval with

cross-functional input gathered

· Lead & drive RFQ roll-up by NPI and coordinate with Customer Service

to release official RFQ

· Oversee direct communications with Customers

· Manage SO trigger and communication by initiating kick-off meeting

with internal and customer

· Lead and drive for FA approval and final product costing after FA

approval

· Support delivery and quality escalation

· Manage material price up request from purchasing or/and production

or/and NPI to ensure margin is maintained.

· Drive NPI, Purchasing, Manufaturing and Production on Cost

reduction based on selected basket of goods.

· Achieve Management objectives and key performance indexes set

· Perform additional duties as assigned.

Job Requirements:

· More than 10 years experiences in Sales and Marketing

· Degree/Diploma in Mechanical /Manufacturing Engineering field or

any professional qualification related to Sales and Business

developments

· Preferably minumum more than 5 years in contract manufacturing

and 3 to 5 years in metal machining industry.

· Ability to analyse and solve technical problems, make technical

proposals.

· Strong leadership qualities with good communication, written and

interpersonal skills

· Customer-focused and results-driven.

· Able to work independently or with the team.

· Able to operate in a fast-paced and changing market environment

· Basic MS Office proficiency.

· Able to accomplish sales-related reports and presentations

ASM is a leading global supplier of products, services, and materials for semiconductor processing. For more than half a century, innovation has been at the core of everything we do. Our smart, ambitious people are dedicated to creating cutting-edge solutions for the world’s leading semiconductor providers. Every day we push the development of next-generation computer-chip technology, always staying a few steps ahead of what’s next.
The talented, enthusiastic people at ASM are just like you: dedicated to improving people’s lives and unlocking new potential. With our collaborative approach to R&D, we advance key semiconductor technologies and platforms like ALD, epitaxy, PEALD, PECVD, and vertical furnaces. And we have recently entered the promising high-growth market: silicon carbide epitaxy. Year after year, our innovations help to make chips smaller, faster, and more powerful. In fact, you will find our technology in every aspect of modern life: in AI, medical equipment, 5G, smartphones, autonomous driving, and more.

Job Description

• Partner with the Global Operations (GOPS) team (Manufacturing, Production Planning, Procurement, and Quality Engineering) with emphasis on manufacturing processes, cycle time, assembly & test sequence, and quality.
• Provide first line engineering support in resolving daily operation issues in semiconductor equipment manufacturing, through collaboration with a team of multidisciplined manufacturing engineers, manufacturing supervisors and technicians.
• Achieve daily targets on product delivery to global customers in alignment with manufacturing engineering strategies, production schedules, quality and safety standards.
• Perform systematic troubleshooting and root cause analysis of manufacturing issues and deviations, provide immediate containment actions, and pursue long term corrective solutions.
• Define and create manufacturing procedures, build & test sequence, methods, and quality documentation (i.e. work instructions, test procedures, inspection checklists, etc.) according to material and assembly specifications.
• Drive timely solutions for the suppliers, contract manufacturing, and internal manufacturing by liaising with cross functional teams in GOPS and Business Units (BU).
• Lead the execution of continuous improvement projects on quality, cost, capacity, and efficiency enhancement (e.g. test fixtures, test automation) with cross functional teams in GOPS and BU.
• Deliver tooling and test equipment according to product requirements, with innovations in meeting manufacturing efficiency and customer quality.

Job Requirements

• Minimum a Bachelor’s Degree in Electrical or Electronics Engineering
• Minimum 2 years of experience working in a manufacturing or engineering environment with hands-on engagement on manufacturing and productivity activities.
• Experience within the Semiconductor/Capital Equipment industry in Manufacturing, Quality and/or engineering roles in equipment assembly and test
• Experience in implementing Modular testing, System level integrated testing and automated testing.
• Knowledge to handle PLC software codes, System software scripts etc.
• Understanding on Bill of Material structure (Product structure, Generic vs. Customization, Options and Kits) and revision changes
• Experience in working and interfacing with cross functional teams. Demonstrated ability to influence cross functional organization and drive changes.
• Knowledge in the following operational excellence tools but not limited to: Lean Manufacturing, FMEA, 8D, PDCA, DMAIC, 6-sigma, Cpk, GR&R or SPC.
• Experience with SAP and/or major ERP/MRP systems and processes at user level.
• Demonstrated leadership skills with proven track record to drive changes and implement changes to benefit the organization.

At ASM we are committed to supporting our people, enabling them to develop their talents and perform at their best. We actively promote an inclusive and diverse culture that fosters trust and transparency. Our people are our power, and we value the differences between everyone because it is what make us better as a team. By embracing a wide range of perspectives, we enable a culture of continuous exploration and adoption of new ideas. At every step, we know that it is our valued people who enable us to deliver excellent products and service to our clients – and to make a meaningful difference in society.

So join us on our journey and unleash the power of an open mind. Discover how you can be part of our exciting future and apply today! To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram and YouTube.

Responsibilities :

• You will be responsible for defining business strategy, developing and executing sales plans, managing marketing budgets and implementing action plans to meet revenue growth and commercial targets through establishing strategic business relationships with customers, espeically China, Europe and Russia Market.
• You will work closely with distributors, building strategic alliances and seeking opportunities to collaborate, with the objective of meeting sales and revenue targets. Spearheading the entire sales process from business development, sales presentation, pricing strategy and negotiation.
• Brand building is a priority and you will seek to increase brand visibility and recognition.

Requirements:

• Degree in Business Administrative with at least 10 years' of relevant sales experience.
• Currently holding a similar senior level role in the industry, has a strong existing network in the related industry and an in depth understanding of industry and market trends.
• Sales experience in technical or competitive products, coupled with well pronounced business acumen and successful sales track record will have an added advantage.

Job Description

1. Prepare and analyse cost comparison.
   1. Obtaining quotations, liaising and negotiate with sub-contractors and suppliers.
   2. Responsible for measuring quantities and taking off.
   3. Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments.
   4. Pre contract administration e.g. tender preparation.
   5. All other QS related job.

Requirements

1. 3 yrs and above experience as QS with Main Contractor and preferably relevant to government or HDB BTO project.
   1. Familiar with PSSCOC contracts.
   2. Degree / Diploma in Building or Quantity Surveyor or its equivalent.
   3. Proven ability in contract negotiation, contract administration & variation orders.
   4. Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines.

Job Responsibilities

• Assist in documentation filling
• Maintain proper filing and documentation of records
• Retrieve and resend invoices, credit notes and statement of accounts
• Handling and keeping track of customer's enquiry and order
• Perform ad-hoc and other administrative duties

Job Requirement

• At least a Higher Nitec in Accounting/ Admin or related fields
• Entry level/ 1 year of relevant experience
• Team Player
• Able to communicate effectively

We are looking for Operation Administrator. Whose main responsibilities:-

· Payroll process base on timesheet; Project Manpower claim

· Laise with supply for material purchase

· Assist for WP/PP renewal, update biodata

· Coordinate with project team for Training arrange, Document submission

· Other duties in administration matters and ad hoc as per request

· Proactive and able to work independent

Requirement:

Prefer candidate with relevant experience.

In additional, understand of work pass process.