finance executive.

account mothly closing.

perform monthly bank reconcililation.

perform coding of accounts.

prepare quarterly GST returns.

handle full cycle of recruitment matters.

manage full spectrum of monthly payroll processing and administration.

perform general HR adminisstrative function such as processing of work pass. preparation of appointment, confirmation letter, insurance claim for hospital, surgical and work injury compensation.

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

5.5 days per week

Mondays to Fridays: 8:00 AM to 5:00 PM

Saturdays: 8:00 AM to 12:00 PM

Work Location: 8 Gul Circle Singapore 629564

Competitive remuneration package

Supportive and collaborative work environment

Opportunity to grow and develop your skills

As a Welder, you will play an important role in ensuring the structural integrity and safety of our buses and trucks.

Your responsibilities will include but not limited to:

Performing cutting & welding jobs on buses & trucks

Carrying out accident repairs on buses & trucks

Fitting and fabricating body repair works on buses & trucks

To be successful in this role:

Minimum of 3 years of hands-on work experience in welding or a related field

A strong passion for delivering high-quality workmanship

Ability to work independently and as part of a team

Familiarity with safety standards and practices

If you meet the above requirements and are eager to take on this exciting and challenging role, we encourage you to apply today! To apply, simply click the "Apply" button.

We look forward to welcoming you on board.

Note: ONLY shortlisted candidates will be contacted for further selection processes.

Are you a skilled mechanic with experience in servicing and repairing buses and heavy vehicles? You just found yourself the right place! We are currently hiring a Workshop Mechanic for Heavy Vehicles and Buses to join our dedicated team. With us, you will have the opportunity to grow professionally and contribute to the success of our workshop.

5.5 days’ work week

Mondays to Fridays: 8:00 AM to 5:00 PM

Saturdays: 8:00 AM to 12:00 PM

Work Location: 8 Gul Circle Singapore 629564

Opportunity to work in a well-ventilated and well-lit repair workshop

Exposure to a wide range of bus and truck models

Continuous learning and skill development

Supportive and collaborative work environment

Competitive salary and benefits package

Your responsibilities will include but not limited to:

Perform servicing and repairs on buses and heavy vehicles

Conduct component overhaul as required

Carry out fault diagnosis to identify and address mechanical issues

To succeed in this role, you should possess the following qualifications and skills:

Minimum of 2 years of hands-on experience in servicing and repairing buses and heavy vehicles

Candidates with proven strong technical and diagnostic skills will be considered for a senior technician position

Possession of a valid Singapore LTA-issued Class 3 driving license will be advantageous

If you are a dedicated individual with a positive attitude, excellent technical skills and a desire to succeed, we would love to hear from you. To apply, click the "Apply" button

Let's drive excellence together.

Note: ONLY shortlisted candidates will be contacted for further selection processes.

Key Roles and Responsibilities

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during office hours and standby duties after office hours in rotating duty roster
• Liaise closely with client representatives on all service/maintenance related issues.
• Manage day-to-day client interactions and expectations for optimal results..
• Familiarize yourself and deliver customer satisfaction base on each client’s business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required

Requirements

• Min Higher Nitec & Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.
• Required to perform standby duties
• Driving License – Preferably if candidate possess own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road
• 5.5 work day

Green Star Engineering Pte Ltd looking for an Energetic Managing Director for the Organisation's upcoming projects.

• Develop and execute the company’s business strategies in order to attain the goals of the board and shareholders
• Provide strategic advice to the board and Chairperson so that they will have accurate view of the market and the company’s future
• Prepare and implement comprehensive business plans to facilitate achievement by planning cost-effective operations and market development activities
• Ensure company policies and legal guidelines are communicated all the way from the top down in the company and that they are followed at all times
• Communicate and maintain trust relationships with shareholders, business partners and authorities
• Oversee the company’s financial performance, investments and other business ventures
• Delegate responsibilities and supervise the work of executives providing guidance and motivation to drive maximum performance
• Read all submitted reports by lower rank managers to reward performance, prevent issues and resolve problems
• Act as the public speaker and public relations representative of the company in ways that strengthen its profile
• Analyze problematic situations and occurrences and provide solutions to ensure company survival and growth

Requirements and skills

• Proven experience as Managing Director or other managerial position
• Demonstrable experience in developing strategic and business plans
• Thorough knowledge of market changes and forces that influence the company
• Strong understanding of corporate finance and measures of performance
• Familiarity with corporate law and management best practices
• Excellent organisational and leadership skills
• Excellent communication, interpersonal and presentation skills
• Outstanding analytical and problem-solving abilities
• Diploma holders are also welcome

Greenstar Engineering is looking for a skilled professional to supervise the organization’s administration systems. The administration manager will be responsible for planning, streamlining, and executing administrative workflows and procedures. They will oversee a team that focuses on new personnel recruiting and training, and allocate responsibilities and office space to all staffers. The administration manager will also assess personnel performance, provide guidance, and implement process changes to enhance overall efficiency.

Objectives of this role
Recruit and onboard high-quality personnel that can advance Greenstar Engineering ’s goals
Establish conduct and workflow standards across the organization
Remove productivity roadblocks as they emerge
Ensure processes and procedures comply with relevant policies and regulations
Streamline business operations to keep costs within established budgets
Drive smooth organizational operations throughout the workday
Responsibilities
Direct personnel recruitment and training processes
Plan and streamline all administrative procedures
Assess team performance to identify opportunities for coaching and guidance
Manage personnel scheduling and project deadlines
Monitor office inventory and organizational costs
Encourage effective communication across the organization
Skills and qualifications
Highly analytical with excellent problem-solving skills
Empathetic leadership style
Capable of clearly communicating with others
Superb organizational and time-management abilities
An understanding of basic arithmetic
Competent computer literacy
Preferred qualifications
Managerial experience in an office setting
Deep understanding of budgeting best practices
In-depth knowledge of Microsoft Office or Google Suite
Outstanding strategic planning abilities
Comprehensive understanding of office management processes
Demonstrable resourcefulness in high-stress situations

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

Intro to GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Introduction:

We are expanding our Fab Operations and are looking for Process Engineers, in this role you will sustain and improve process / SPC to meet quality, cost, productivity requirements. Process improvement to eliminate inherent process weakness to achieve company goals.

Your Job:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance.
• Do proper annotation to maintain quality troubleshooting rate for SPC OOC.
• Understand Cp and Cpk indices.
• Monitor critical SPC charts daily.
• Perform process window study and provide improvement plan to reduce OOC and improve CPK.
• Review ESPC charts using SPACE.
• Know all the rules for ESPC.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Raise PCRB and understand the requirement for PCRB opening, follow through with qual plan, analyze data using required software and CR closure.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues.
• Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline.
• Work closely with Equipment Engineer on new equipment acceptance.

Required Qualifications:

• Degree in electrical / electronic / Mechanical / Microelectronics / Chemical process Engineering / Chemistry / Physics
• 2 years of working experience in electrical / electronics industry
• Team Player
• Good ownership and accountability
• Good verbal and written communication skills
• Flexible and able to support overtime
• Self motivated, meticulous, and discipline
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are hiring a Project Officer to support the research related work for engineering research project titled: Harnessing Randomness and Chaos in Complex Disordered Photonic Systems - WP3 Miniaturized disorder-scattering based spectrometer in the mid-infrared and Terahertz.

Key Responsibilities:

The Project Officer will work on engineering based research projects. The roles of this position include:

• System integration for the spectrometer and imaging systems
• Build up optical characterization setup and perform device characterization
• Perform the measurement of optoelectronic device
• Prepare research project reports.
• Prepare research materials/equipment purchase requisition.
• Collect and analyze research data.
• Other ad hoc duties pertaining to the research project.

Job Requirements:

• Bachelor degree in Electronic Science and Technology, Optical Engineering, or other related Engineering background.
• Preferred to have more than two-years of relevant research experience.
• A desire to work in a fast paced, collaborative environment.
• Self-motivated and good tasks initiative.
• Strong command of office software such as Excel, power point, word etc. and be capable to plot complicated data into graphs.
• Strong team-work spirit.
• Excellent communication and writing skills.

We regret to inform that only shortlisted candidates will be notified.

JOB PURPOSE

The Project & Engineering Coordinator has to oversee and manage, planning and execution of assigned engineering projects and working alongside other engineers in the planning, design, development, and evaluation of projects.

JOB RESPONSIBILITIES

· Foster a safety culture in all P&E project execution and ensure 100% compliance safety requirement, including contractors and visitors.

· Assist for creating detailed project plan, timeline and schedule to ensure that all tasks are completed on time and within budget.

· Assist Project Engineer to develop new project scope of work.

· Work with compounding and Polymer plant engineers to generate new projects

· Coordinate project execution - Coordinate internal resources, 3rd party vendors/ contractors during projects installation to ensure flawless execution of the project.

· All the engineering activities to execute in compliance with company guidelines i.e. mechanical integrity, SABIC Engineering Standards & EHSS requirements.

· Create the instructions necessary for systems to function. This includes manufacturing maintenance procedures, trainings and system handover to operation.

· Quality Control - Project Coordinate ensure that all work meets the required quality standards and specifications

· Verify and audit the project quality documents with vendor to align engineering standard.

· Documentation - Maintain Engineering deliverables (drawings and documents),Producing CAD drawings according to specifications and changes.

· Reporting- Provide regular progress report to the stakeholders.

EDUCATION/EXPERIENCE REQUIREMENTS

· Minimum NITEC/ Technical certificate/ Diploma in Electrical or Mechanical Engineering or equivalent.

· Preferably with min. 3-5 years’ relevant work experience in chemical industry.

· Knowledge about project management.

· Projects planning & coordination skills.

· Good knowledge about auto CAD and practical experience using CAD software may be required.

· Good knowledge about Design and analytical skills.

· Good knowledge about pneumatic and hydraulic system.

· Good knowledge of office software.

· Strong communication and interpersonal skills.

· Ability to follow instructions and to collaborate with others.

· EHSS knowledge and understanding for Project execution.

· Knowledgeable in Maintenance Theory & Principles; Work processes - Project scheduling and execution

Responsibilities

• Must have experience in aluminium & Glass industry work
• Able to work independently with Main Contractor, Architect to resolve site issues
• Prepare tender submission;handle progress claims and progress payment, VO & finalization of accounts
• To attend site meeting whenever is required
• Materials ordering for sites.
• Any ad-hoc duties assign.
• Estimate the overall cost of the project

Requirements:

• Degree/ Diploma in Building/Quantity Surveying
• At least 5 years QS experience in alum windows & doors
• Meticulous, Independent with good communication skills
• Proficient in AutoCAD and Microsoft Office programs (Excel, Word, e.g.)
• Familar with alum profiles
• Able to work under pressure and tight deadline;

Responsibilities:

• Manages and coordinates a team of drafting and detailing engineers, cost estimators, fabrication and project team

• Ensures proper planning and execution of projects to meet or exceed performance indicators in terms of quality and timeframe

• Oversees the planning of project operations and resolves technical and scheduling issues on-site

• Main point of contact and liaison between project teams and the client's representatives, consultants, and relevant authorities

• Review contract, design drawings, specifications, and bid documents

• Implement effective contract and claim management to increase the contractual margin and protect the Company against liability claims

• Site visits to review the progress of your job

• Monitor compliance of work with workplace safety and health regulations

• This job description is not all-inclusive and may include other duties as assigned

• Candidates should be able to manage multiple projects of various sizes and levels of complexity.

Requirements

• Minimum 5 years of Project Management experience.

• Diploma or equivalent Bachelor's Degree in Construction Management, Structural/Civil Engineering

• Experience with fabrication and installation of structural steel and miscellaneous metals

• Strong analytical, written, and verbal skills.

• Strong computer skills, including AutoCAD, Microsoft Office Suite Project setup

Kindly provide your expected salary, last drawn salary, and reason for leaving in your CV/Resume

Project Management

• To resolve all technical and non-technical issues.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Reduce material wastages on site and maximise usage of machineries/equipment.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Meet targeted progress of works so as to achieve the intended cash flow.

Technical Understanding

• Understands the drawings and scope of works
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Job Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Experience in leading a team or subcontractors would be advantageous.
• Strong communication skills.
• Highly committed and motivated individual.
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
• Candidate with comparable qualification will be considered for Project Manager post.
• Fresh graduates are also welcome to apply.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Responsibilities:

• To be lead engineer or assistant lead engineer in new shipbuilding or ship repair/retrofit projects
• Provide specialist technical advice and information to internal and external parties
• Prepare detailed design drawing using 3D modelling tools, such detailed design drawing could include ducting design and necessary design document to enable production of prototype for product development
• Review and approve detailed design drawings and documents e.g., piping isometrics, piping layout, ducting arrangement, equipment foundation, equipment installation, machinery room layout, bill of materials and various mechanical outfitting drawings, and ensure that the deliverables meet contractual technical specification and Classification Society’s requirements
• Ensure the detailed design drawings and documents have met the standards set by the department and provide further input for improvement
• Update 3D software database on a regular basis to ensure correctness and consistency of component’s engineering attribute.
• Manage external consultants in engineering integration and deliverables
• Coordinate and lead a team of engineers to ensure timely and accurate engineering deliverables
• Participate in tests and sea trials, where required
• Liaise with ship owners and Classification Societies to obtain approval on engineering deliverables.
• Resolve technical issues raised by ship owners and Classification Societies
  

Requirements:

• Bachelor’s Degree with Honours in Mechanical/Marine/Offshore/Naval Architecture
• At least 5-8 years experience in engineering design on HVAC (Heating Ventilation and Air Conditioning) system
• Good working experience with HVAC turnkey contractor, HVAC equipment supplier, Shipyard HVAC related department
• Well-articulated in presentations to both clients and senior management, with good command of English, both spoken and written
• Strong leadership with project management and interpersonal skills

Knowledge and Skills:

• Strong knowledge of HVAC marine international design codes, Classification/Statutory Rules and Regulations.
• Engineering and design project management skills.
• Software (preferred): AVEVA Marine, AutoCAD or similar functions
• Software (need basis): VA One, Star CCM+, Aveva PID, Pipeflow Expert

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Responsibilities:

• To cover design aspects for systems such as Radars, Navigation Comms, Integrated Comms, Integrated Combat Systems and Layout designs
• Work with other trades on integration design between Platform and Systems
• To prepare the General Arrangement Plan (GAP)
• Preparation of tender proposal and technical specifications for tender submission
• Establish Major Equipment Specifications and Selections
• To check and ensure equipment specification, technical information, functional description document, installation control document and interface design specification are correct and properly maintained, disseminate and use for the preparation of design work activities
• Planning and control of Basic design document schedule to support project milestone
• To develop of new designs and design concepts;
• To source for new design tools;
• To provide specialist technical assessment and analysis other in-house departments and external parties
• To continue updating the developing and expanding of the design database
• To participate in tests and sea trials, including HAT and SAT, where required
• Perform detail design calculation where necessary
• To follow up and resolve all the design issues raised by Owner, Classification and Statutory Authorities on all design documents promptly and timely to support the schedule, including on site checking and discussions
• To generate 2D arrangement drawings for major equipment
• To generate list of design drawing / document specific to each project
• To check working drawings and ensure that they conform to contractual technical specification, installation control documents, Classification and Statutory Rules/Regulations
• To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities.

Requirements:

• Degree in Electrical & Electronics Engineering
• 3 to 5 years of relevant experience in Marine related projects on Navigation Communications Systems and Radars (Fire Contol & Surveillance) will be advantageous
• Possess both project management and man management experience
• Ability to manage external and internal stakeholders will be critical for this role
• Proficiency in AutoCAD
• Only Singaporeans will be considered for this role

Additional Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

CLASS 4 DRIVERS

Driver Responsibilities

1. Deliveries of goods to client premises

2. Conduct inspection of the vehicle before departing to deliver goods

3. Loading, transporting and delivering items to clients or businesses in a safe and timely manner

4. Ensure daily delivery fulfilment

5. Assisting with loading and unloading items from vehicles

6. Responsible for the clean linessand working condition of company'svehicle

7. Any other ad-hoc duties assigned

Knowledge and relevant experience

• Possess valid Singapore Class4License (Experience in driving a truck for more than 3years)
• Willingness to adhere to assigned routes,schedules, safety procedures,and transportation laws
• Strong time management and customer service skills
• Attention to detail
• Represent the company in a professional manner
• Possess good attitude and polite

Qualifications to apply for job

• High school or diploma or other technical certificates, such as courses for qualified technicians or specialists is preferred.
• Valid class 4 driving license. Cleandriving record.
• Sound knowledge of road safetyregulations.
• Working knowledge of local roads and routes
• The ability to utilize maps, GPSsystems,and car manuals.
• Effectivecommunicationskills.Punctual andreliable.
• Providing accurate time records ofthecompany vehicle’s coming andgoings.
• Reporting any accidents, injuries,andvehicle damage to management

To start a new Electrical Motors, Generators repair services.

Looking for experience Engineers, Service Oriented, Electrical Workshop Managers, to take charge of a new project. Experience with Marine, Oil & Gas, Explosion-proof equipment.

To make full planning, to recruit, train and build up the team. Setting up full repair and testing requirements.

Pls whatsApp: 9832-1639

Responsibilities:

• Responsible for day to day on-site project supervision for conversion/repair of commercial/repair vessels
• Ensure works daily assigned jobs are carry out effectively and productively in order to meet customer specification and requirements.
• To ensure quality assurance on works completed to achieve delivery deadline, target and no safety incident.
• Accountable for Safety for all workers and men under his charge.
• Ensure and enforce safety regulation and requirement are complied with
• Constantly seek improvement in productivity and processes in the course of work

Requirements:

• Diploma or NTC in Mechanical or Marine related fields
• Preferably 3 – 5 years of relevant working experience in marine industry for piping works
• Able to read piping diagrams
• Understanding of machinery equipment and its functionalities
• Understanding of marine classification requirements.
• Knowledge on piping material requirements for both repair and new construction
• Possess man-management experience in workshops and onboard vessels
• Able to work on weekends based on project needs
• Able to work under outdoor conditions - heat, grease and dust

Other Information:

• Location: Tuas Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

We are seeking a skilled Observability Engineer with at least 2-3 years of experience in observability to join our dynamic team. In this role, you will be responsible for implementing, managing, and optimizing observability tools. You will work closely with cross-functional teams to ensure that our systems are monitored effectively, and issues are identified and resolved proactively.

Key Responsibilities:

• Design, implement, and maintain observability frameworks using tools such as Prometheus, Grafana, ELK Stack, tableau or similar.
• Design, implement, and maintain Monitoring tools such as BMC, CA, SolarWinds, SCOM, Dynatrace, Datadog or similar.
• Create and manage dashboards, visualizations, and reports to communicate system health and performance metrics.
• Collaborate with the sales team to understand client requirements and demonstrate how our observability solutions can address their specific needs.
• Prepare and deliver presentations, demos, and workshops to potential clients showcasing the capabilities and benefits of our observability tools.
• Troubleshoot and resolve tools-related issues in a timely manner.
• Assist in the training and mentoring of team members on observability and monitoring tools and practices.

Job Requirements:

• 2-3 years of experience in software development, Implementation, operations, or a related field with a focus on observability tools.
• Proficiency in implementing and managing observability tools.
• Solid understanding of cloud platforms (AWS, Azure, GCP) and containerization technologies (Docker, Kubernetes).
• Experience with scripting languages (Python, Bash, etc.) for automation tasks.
• Knowledge of best practices in monitoring, logging, and incident management.
• Strong analytical skills with the ability to diagnose issues and propose effective solutions.
• Excellent communication and collaboration skills, with a proactive approach to problem-solving.
• Technical experience in Enterprise Monitoring tools such as Dynatrace, Grafana, BMC,
• Knowledge of Automation tools, Cloud Technologies and DevOps Concepts, Open systems and Networking Technologies
• Good knowledge in various monitoring tools e.g. BMC, SolarWinds, CloudWatch and Azure.
• Experience with configuration management tools (Ansible, Terraform, etc.).
• Familiarity with APM (Application Performance Management) tools such as New Relic, Dynatrace, or similar.
• Understanding of network protocols and architectures.
• Experience with orchestration tools (e.g., BMC, Kubernetes, Apache Airflow, Jenkins) to create and manage automated workflows for deploying, monitoring, and scaling observability solutions.

Preferred Qualifications:

• Proficiency in observability tools (e.g., Grafana, ELK Stack, Datadog, Prometheus etc).
• Proficiency in ITOM tools (e.g., BMC, Dynatrace, CA, SCOM, IBM, SolarWinds etc).
• Strong understanding of monitoring and logging frameworks.
• Experience with distributed systems and microservices architecture
• Ability to write scripts for automation and data analysis.
• Experienced in cloud platforms (AWS, Azure, GCP) and their monitoring services.
• Experience with CI/CD pipelines and infrastructure as code (IaC) tools like Terraform or Ansible
• Relevant certifications in cloud computing, DevOps, or observability tools can be a plus.

Work location: Jurong East

Job Summary:

We are seeking a reliable and highly organized Personal Assistant to provide comprehensive support to the CEO. The ideal candidate will be a proactive problem-solver with exceptional communication and time-management skills, ensuring the smooth execution of daily tasks and activities.

Key Responsibilities:

1. Administrative and Office Support:Manage the principal’s calendar, schedule meetings, and coordinate appointments.
   Organize correspondence, emails, and documents, responding on behalf of the principal as required.
   Prepare reports, presentations, and meeting agendas.
   
2. Personal Tasks:Handle personal errands, including shopping, reservations, and managing household needs.
   Assist with family or personal commitments, including event planning or travel arrangements.
   
3. Travel Coordination:Plan and organize domestic and international travel itineraries, including flights, accommodations, and transportation.
   Ensure all travel-related documents and arrangements are accurate and up to date.
   
4. Event Management:Assist in planning and organizing professional and personal events.
   Coordinate with vendors, service providers, and other stakeholders as needed.
   
5. Liaison and Communication:Act as a point of contact between the principal and internal/external parties.
   Maintain a high level of professionalism and confidentiality in all communications.
   
6. Task Prioritization and Execution:Anticipate the principal’s needs and proactively manage priorities.
   Maintain a task list and ensure timely completion of deliverables.
   

Qualifications:

• Education: High school diploma or equivalent (Bachelor’s degree preferred).
• Experience: Minimum 3 years of experience as a Personal Assistant, Executive Assistant, or in a similar role.
• Skills:Proficiency in Microsoft Office Suite and other productivity tools.
  Strong organizational and multitasking abilities.
  Excellent verbal and written communication skills.
  Ability to work under pressure and meet tight deadlines.
  

Responsibilities:

• To ensure daily smooth operations for warehouse and diesel and resolve any arising issue
• To manage overall diesel inventory, such as trucks and stations etc, weekly/ad-hoc ordering for adblue and diesel and ensure availability at all times
• To liaise with buyer/supplier/project sites for diesel operations issues, including diesel supply
• To liaise with SCDF and related parties for inspection and licensing matters and ensure diesel license are up-to-date and renewed promptly
• To plan daily road routes for diesel drivers and perform daily submission of Hazardous Material Transportation notification to SCDF
• To ensure all vehicles and equipment have proper maintenance, service regularly, certified and safe to use
• To ensure inventory accuracy, proper goods movement record, stock reconciliation, First in First Out (FIFO) system is in place and highlight discrepancy if any
• To plan and optimize storage capacity for inventory and replenished in timely manner
• To propose cost savings ideas and improvement to process and ensure compliance with internal quality standards and external regulations
• To be involved in manpower planning and deployment & guide / lead new staffs and workers
• To lead the annual stock-take activity and cycle count and organize/conduct toolbox meeting
• Ensure safety practices and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Requirements

• Certificate / Diploma in Logistics / Supply Chain Management or equivalent
• Computer skills and Microsoft Office
• Location in Sungei Kadut Workshop until the workshop in Jalan Papan is ready

Job Summary:

We are seeking a highly organized and proactive Administrative Assistant to support our team and ensure smooth day-to-day operations. The ideal candidate will provide administrative and clerical support, manage schedules, and contribute to the efficiency of our workplace.

Key Responsibilities:

1. Administrative Support:Manage and organize office files, documents, and correspondence.
   Prepare reports, presentations, and meeting minutes as required.
   Handle incoming calls, emails, and other communications promptly and professionally.
   
2. Scheduling and Coordination:Maintain calendars, schedule meetings, and coordinate appointments.
   Organize travel arrangements, including booking flights, accommodations, and transportation.
   Assist in planning and coordinating company events, meetings, or training sessions.
   
3. Office Management:Order and maintain office supplies and equipment inventory.
   Ensure the office environment is tidy, well-organized, and functional.
   Liaise with vendors and service providers for office-related needs.
   
4. Data Management:Input and maintain accurate records in company databases.
   Conduct research and compile data for reports and presentations.
   
5. Team Collaboration:Act as a point of contact between departments, clients, and external partners.
   Assist in onboarding new employees by preparing necessary documentation and resources.
   

Qualifications:

• Education: High school diploma or equivalent (Bachelor’s degree preferred).
• Experience: Minimum 2 years of experience in an administrative or office support role.
• Skills:Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook).
  Excellent verbal and written communication skills.
  Strong organizational and multitasking abilities.
  Attention to detail and problem-solving skills.
  

Personal Attributes:

• A proactive and adaptable mindset.
• Professional demeanor and ability to handle confidential information.
• Ability to work independently and collaboratively within a team.

Responsibilities

• OperationsTo process order from Workshop and Warehouse Department
• To manage goods receiving process and ensure proper checking & inspection of goods are done
• To report discrepancy issues arising from Goods Receiving
• To update Order Tracking Report and Goods Receiving Report and ensure on the accuracy
• To assist Warehouse Executive in diesel ordering, deployment and coordination with site personnel
• Project & DepartmentsTo process order from project sites and internal departments
• To manage end-to-end order fulfillment from the order to goods delivery
• To manage returned goods from project sites and internal departments
  Responsible for assets creation and disposal e.g. container, ECM plant, weight bridge & etc
• To update Assets Master List and Mobile Web Apps for rental items
• In-charge of logistics arrangement related to assets deployment and movement
• To ensure all assets are calibrated and serviced according to schedule
• To conduct site inspection half-yearly for rented assets
• Responsible to raise Purchase Requisition
• To ensure proper storage of items on timely manner
• To manage the received feedback forms and responsible to close it
• To support Warehouse operations when required which includes pick, pack, receiving, putaway, loading, unloading and/or operate forklift / stacker
• To assist with Warehouse's Annual Stock-Take Activity and cycle count
• To ensure timely updating of data into system and accuracy of data
• Maintain the proper filling and document control for all processes
• Ensure safety practices and housekeeping is to maintained to the highest standard
• To perform ad-hoc duties as per assigned

Requirements

1. Certificate / Diploma in Logistics / Supply Chain Management or equivalent
2. Computer skills and Microsoft Office
3. Location in Sungei Kadut Workshop until the workshop in Jalan Papan is ready