Electrical Engineer (Satellite, Radio Frequency)

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625)

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)

General Description

• Responsible as Operation’s facility engineer for the development of Terminal’s new LNG Trucking facility. Incumbent shall support the Project team, ensure the Operability & Maintainability aspects of the new facility are taken care during engineering, design and construction phases. Incumbent shall also develop and execute “Ready to Operate” plans for the facility;
• Incumbent shall work closely as a team with Production Shift Teams, Maintenance Team and other Process Engineers providing process engineering expertise ensuring the Terminal and Trucking facilities operates safely, reliably and efficiently;
• Incumbent shall liaise closely with Commercial team to ensure the Terminal delivers the required services, inclusive of Jetty Operations, Gas supply and Trucking are incompliance to regulations, procedures and contractual agreements

Roles & Responsibilities

The incumbent roles include but not limited to following scope of tasks and duties:

• Evaluate operations activities, make recommendations and execute continuous process improvements in the areas of operational excellence;
• Recruit, train and supervise the Trucking Technicians assigned for operating the Trucking Facility.
• Lead troubleshooting, inspections, reviews and investigations of equipment or process system to support optimisation, drive root cause analysis and formulate remedial resolution. Incumbent shall also investigate Customer’s complaints related to equipment and process systems;
• Review the adequacy of standard operating procedures(SOP) to ensure safe and reliable operations with operational design limitations, includes commissioning, operations and maintenance phases of facilities;
• Provide specific instructions to Production Shift Teams, Maintenance Team, Trucking Team and Laboratory on LNG transfer operations, trucking, stowage plans and samplings requirements;
• Liaise with stakeholders in ensuring LNG surveyor’s reports, certificates of quality are accurate and consistent as per the procedures;
• Diligently review maintenance plans, method statements and risk assessment on the process safety aspects for the maintenance work related to the assigned equipment and systems;
• Compile data and measure Terminal’s performance including service availability and efficiency;
• Undertake alarm management for assigned area and proactively drive alarms analysis to ensure robust operations;
• Take lead role for Management of Change(MOC) for facilities modification, as required;
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, 3D models, Safety Integrity Level, RAM analysis, design layout and process safety requirement in alignment with regulatory and business objectives;
• Report HSSE near miss/violation. Take an active role in HSSE activities and green initiatives;
• Assigned specific role and responsibility in emergency response;

Work Experience

• Minimum of eight (8) years work experience in process engineering function in an oil, gas and petrochemical facilities, complex utility, cryogenic or trucking facilities;
• Conversant with local/international codes, regulations, standards, best practices, equipment inspection and schedule requirements;
• Knowledge of installation, commissioning, start-up, maintenance and troubleshooting of processes system in oil, gas or petrochemical industry;
• Knowledge of Process Safety Management, Electrical, Instrumentation, Controls or Mechanical systems;
• Experience in Process Simulation (e.g. Hysys/Unisim or equivalent), Design Softwares(e.g. Fisher Specification Manager, Hydraulics, PSV sizing) or other related process software an advantage;
• Experience in Engineering design analysis including preliminary design development, heat and mass balance calculation, technology evaluation and equipment selection preferred;
• Experience in dealing with consultants and contractors involved in the Oil & Gas sector, including external agencies, utilities and government organizations;
• Basic knowledge of ship-shore interface and cryogenic transfer operations an advantage;
• Capable of lead and guide technicians ensuring the works are executed safely and effectively;

Education

• Incumbent must possess a Degree in Chemical Engineering from a recognised university.
• Process Engineering background with Mechanical and Instruments knowledge.

Job Descriptions:

- Review and Summarize Enquiry, Identify Scope of Works and Prepare Commercial Proposal

- Quantity Checking and Preliminary Costing including getting Downstream Consultant Price

- Compile Supporting Documents for Tender / Proposal submission

- Follow Up and Negotiate on contract

- Review Terms and Conditions of Contract from client

- Prepare, Submit and Follow Up on Progress Claim, Tax Invoice and Payment Collection

- Closing of Project Account upon Project Completion

- Reporting to Senior QS / Directors

Requirements:

- Candidate must possess at least a Bachelor Degree in Quantity Surveying or Civil Engineering, Building or equivalent from a recognized university

- At least 2 Year (s) of working experience with strong knowledge of Local Construction Practices

- Effective Communication Skills and Enjoy Interacting with people at all levels

- Meticulous, an eye for Details and Sensitive to Figures / Numbers

- Positive Attitudes / Drive for Result and Willing to Learn

- Good Self-Discipline and Ownership of Task

Job Order:625106
Responsibilities:

• Develop targeted marketing plans and initiatives for specific products or product lines to enhance their competitive positioning and market presence.
• Create comprehensive business plans and establish strategic product positioning in the marketplace.
• Conduct market research, monitor competitive activities, and identify customer requirements to inform strategic decisions.
• Develop and implement pricing strategies in collaboration with engineering, manufacturing, and sales teams to introduce new products or enhance existing offerings.
• Prepare pricing quotations, negotiate terms to finalize agreements, and complete necessary documentation for order processing.
• Ensure timely follow-up on accounts receivables to maintain healthy cash flow.
• Deliver compelling presentations on the company's product roadmap and capabilities to customers, while effectively communicating customers' technological needs to internal business units.
• Maintain comprehensive documentation and appropriate account coverage for all assigned customers, including detailed summaries of customer visits and tailored action plans.
• Build and nurture strong customer relationships by identifying current and future service requirements through direct engagement with potential and existing clients.
• Collaborate with internal business units to establish annual sales budgets and ensure alignment with organizational goals.

Requirements:

• Minimum of 2 years of experience as a Sales Engineer within the semiconductor industry.
• Willingness to travel extensively and dedicate extended hours to successfully manage complex sales projects.
• Strong communication and interpersonal skills, with the ability to build lasting relationships.
• Detail-oriented, organized, and resourceful team player with excellent problem-solving skills.
• Self-motivated and capable of working independently with minimal supervision.

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Gabriel
EA Personnel Reg. No.: R22104076
EA Licence No.: 07C5771

An ACMV (Air Conditioning & Mechanical Ventilation) Installation Site Coordinator plays a crucial role in overseeing and coordinating the installation of ACMV. Their duties and responsibilities are focus on ensuring the project is completed efficiently, safely, and within budget. Detailed breakdown of their responsibilities shall be as below and but not limited to:

1. Project Planning & Scheduling

• Work Scheduling: Coordinate and schedule all activities related to the installation of ACMV systems, ensuring that work is carried out according to the project timeline.
• Resource Allocation: Ensure that manpower, materials, and equipment are available as per project needs and schedules.
• Coordination with Contractors: Collaborate with subcontractors, suppliers, and other vendors involved in the installation process to ensure timely delivery and work execution.

2. Site Supervision

• Site Setup: Oversee the setup of the installation site, ensuring that all necessary equipment and materials are in place.
• Installation Supervision: Monitor the installation of ACMV systems such as ducting, piping, chillers, AHUs (Air Handling Units), FCUs (Fan Coil Units), BMS system, ESCS system, Jet Fan system and other components.
• Safety Compliance: Ensure that the installation is carried out according to safety regulations and that all team members are adhering to safety protocols (e.g., wearing PPE, following safety guidelines).
• Quality Control: Supervise the installation process to ensure that the work is completed to the required quality standards and complies with the project specifications and drawings.

3. Technical Support & Problem Solving

• Troubleshooting: Identify and resolve technical /site issues, constraint that arise during installation, working closely with engineers and technicians to provide solutions.
• Technical Assistance: Provide on-site technical support to ensure the correct assembly and installation of ACMV systems as per the design specifications.
• Adjustment & Modification: Recommend and implement necessary adjustments or modifications during the installation process to address unforeseen issues or improve efficiency.

4. Liaison with Stakeholders

• Client Interaction: Act as the main point of contact between the client and the project team, ensuring that the client's requirements and expectations are met.
• Coordination with Engineers: Work closely with Supervisor, Engineers, Designers, BIM team and Project Manager to ensure the installation meets design specifications and standards.
• Reporting: Provide regular progress updates and reports to Project Managers, Site engineers, and other relevant stakeholders.

5. Documentation and Reporting

• Project Documentation: Maintain accurate records of installation activities, including daily site reports, inspection reports, and material usage logs.
• Variation Management: Track and document any changes or variations to the project scope and ensure they are communicated to the relevant stakeholders.
• Site Meetings: Attend regular site meetings to review progress, discuss challenges, and plan the next phase of work.

6. Inspection & Testing

• Inspection of Installation: Ensure all installed systems and equipment are properly inspected for compliance with design and installation standards.
• Pre-commissioning Tests: Coordinate pre-commissioning tests, including leak testing of ductwork and piping, to verify the systems' integrity and performance. ACMV RI and TOP items inspection preparation and check before RI and TOP inspections.
• Final Commissioning: Assist in the commissioning of ACMV systems, ensuring that all testing, balancing, and adjustments are completed before handing over to the client.

7. Health, Safety, and Environmental Compliance

• Safety Training: Conduct safety briefings and ensure all workers are trained in safety practices specific to ACMV installation.
• Environmental Compliance: Ensure that installation practices are environmentally friendly, reducing wastage, managing emissions, and recycling materials where possible.
• Risk Assessment: Conduct risk assessments to identify and mitigate potential hazards on-site.
• Site Attendance: To attend everyday morning exercise and tool box meeting as per main con scheduled timing, conduct site walk to check and monitor site progress and arrange subcon workers and direct workers for necessary work to carry out.
• Permit Application: Apply Permit to Work (PTW) and other necessary permit such as Work at height, hot work, confined space, etc via main con NOVADE application platform.

8. Coordination of Multiple Trades

• Interfacing with Other Trades: Coordinate with other trade contractors (electrical, plumbing, civil) to ensure smooth progress and avoid conflicts between work activities.
• Sequencing Work: Ensure that ACMV installation is sequenced properly in relation to other trades and that all work is integrated effectively within the overall project.

9. Cost Control

• Material Management: Monitor material usage and inventory to avoid wastage and overstocking.

10. Post-Installation Support

• System Handover: Participate in the handover process, ensuring all necessary documentation and manuals are provided to the client.
• Defect Rectification: Oversee the rectification of any defects found after installation, ensuring they are addressed in a timely manner.

11. Training and Mentoring

• Team Training: Ensure the installation team is well-trained in the latest ACMV technologies, tools, and safety procedures.
• Mentorship: Provide guidance to junior staff and technicians on technical aspects and best practices of installation.

In summary, the ACMV Installation Site Coordinator is responsible for overseeing the complete installation process, from planning to execution and final handover, ensuring that everything runs smoothly, safely, and according to specifications. They serve as a central point of coordination between the project management team, contractors, engineers, and clients.

Requirements:

- Diploma or above in mechanical engineering or related qualifications

- Min 2 years on site experience

- Experience in BIM is an added advantage

- Strong independence and good communication in English

- Able to work 5.5 days week

Job Responsibilities:

• Develop and deploy machine learning models: Design, build, and optimize machine learning models and algorithms to solve specific business problems. Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.
• Model training and evaluation: Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance and identify areas for improvement, employing techniques such as cross-validation, hyperparameter optimization, and ensemble methods.
• Model deployment and integration: Collaborate with software engineers and DevOps teams to deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.
• Performance monitoring and maintenance: Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.
• Data analysis and insights: Perform exploratory data analysis, generate insights, and present findings to stakeholders. Use statistical methods and visualization techniques to communicate complex concepts and patterns effectively.
• Stay up-to-date with the latest advancements: Keep abreast of the latest research and trends in machine learning and artificial intelligence. Evaluate and recommend new tools, libraries, and methodologies to enhance the efficiency and effectiveness of the machine learning workflow.

Requirements:

• Bachelor's or Master's degree in Computer Science, Data Science, Machine Learning, or a related field. An equivalent combination of education and experience will also be considered.
• At least 2 years’ experience working in a similar role. Hands-on experience in designing, developing, and deploying machine learning models in real-world applications.
• Solid understanding of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Experience with working on Large Language Models and Generative AI technology is a plus.

Technical skills:

• Strong programming skills in languages such as Python.
• Proficiency in machine learning frameworks such as TensorFlow, PyTorch, or Scikit-Learn etc.
• Solid understanding of Statistical Analysis, Probability Theory, and Hypothesis Testing.
• Familiarity with machine learning tools on cloud platforms (e.g., AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.
• Problem-solving and analytical mindset: Ability to analyze complex problems, break them down into solvable components, and develop innovative machine learning solutions. Strong mathematical and analytical skills are essential.
• Communication and collaboration: Excellent verbal and written communication skills, with the ability to convey technical concepts to both technical and non-technical stakeholders. Proven ability to work collaboratively in a team environment and effectively manage multiple priorities.
• Adaptability and continuous learning: Willingness to adapt to evolving technologies and learn new tools and techniques. Demonstrated commitment to staying updated with the latest advancements in machine learning and artificial intelligence.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Roles & Responsibilities

• Study tender specifications and drawings
• Evaluate tenders and cost estimates
• Sourcing and comparing cost and pricing
• Prepare tender documents, costing, tender evaluation, and contract administration
• Prepare quotations to clients, ensure completeness and timely submission of tender bid
• Responsible for controlling costs, budget management, evaluation of price comparison, and costing summary
• Identify and prepare variation orders (VO), monthly reports for progress payment claims
• Attend tender interviews/meetings and liaise with main contractors, subcontractors and project team
• Attend site show-round to investigate site conditions, engineering and technical matters to achieve higher accuracy in BOQ
• Co-ordinate with clients, quantity surveyors, consultants, subcontractors and suppliers to clarify technical matters to support/assist tendering process
• Ad-hoc duties as assigned.

Skills & experience required

• Diploma in Electrical Engineering / Quantity Surveying
• Experience in QS (Electrical) in Construction industry
• Proficient in MS office applications and AutoCad knowledge
• Positive working attitude
• Meticulous, analytical with excellent problem-solving skills, proactive, good team player, and able to meet tight deadlines

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

DESCRIPTION

As a Electrical Engineer for FPSO (Floating Production, Storage, and Offloading), you will be responsible for providing technical leadership and expertise in the design, installation, and maintenance of electrical systems onboard FPSO vessels. You will lead a team of electrical engineers and technicians, ensuring the safe and reliable operation of electrical equipment and systems in compliance with industry standards and regulatory requirements. Your role will involve overseeing electrical design, integration, commissioning, and troubleshooting activities to support FPSO operations and project execution. The Electrical Engineer’s scope will consist of the following:

DUTIES & RESPONSIBILITIES

• Lead and manage a team of electrical engineers and technicians involved in the design, installation, and maintenance of electrical systems onboard FPSO vessels.
• Plan, coordinate, and oversee electrical engineering activities throughout the project lifecycle, including conceptual design, detailed engineering, construction, and commissioning phases.
• Develop electrical specifications, drawings, and technical documents in accordance with project requirements, class society rules, and regulatory standards (e.g., ABS, DNVGL).
• Review and approve electrical design deliverables, including single-line diagrams, schematics, equipment layouts, cable schedules, and equipment specifications.
• Collaborate with other engineering disciplines, project managers, and vendors to ensure the successful integration of electrical systems with overall FPSO design and project objectives.
• Conduct technical reviews, risk assessments, and feasibility studies for electrical engineering projects, identifying opportunities for optimization and improvement.
• Ensure compliance with applicable regulatory requirements, industry standards, and best practices for electrical safety, performance, and reliability.
• Provide technical support and guidance during procurement activities, including specification of electrical equipment and materials, vendor evaluation, and bid review.
• Lead commissioning, testing, and troubleshooting activities for electrical systems and equipment onboard FPSO vessels, ensuring adherence to project specifications and quality standards.
• Monitor and analyse electrical system performance, reliability, and efficiency, identifying opportunities for optimization, maintenance, and upgrades to support FPSO operations.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Able to relocate to Dubai for minimum 6 months rotation due to project requirements.
• Bachelor’s degree in electrical engineering or related field. A Master’s degree or professional certification (e.g., PE license) is preferred.
• Proven experience (10+ years) in electrical engineering, with a focus on marine and offshore projects, particularly FPSO vessels.
• Strong technical knowledge and expertise in electrical engineering principles, practices, and standards, including marine electrical systems, power distribution, and hazardous area classification.
• Familiarity with class society rules (e.g., ABS, DNVGL), regulatory requirements (e.g., IMO, SOLAS), and industry standards applicable to FPSO electrical systems.
• Proficiency in electrical design software and tools, such as AutoCAD, ETAP, EPLAN, or equivalent programs, for schematic design, calculations, and analysis.
• Experience leading and managing multidisciplinary engineering teams, with demonstrated leadership abilities and effective communication skills.
• In-depth understanding of electrical safety practices, hazard analysis, and risk assessment methodologies applicable to marine and offshore environments.
• Ability to work effectively in a dynamic and challenging offshore environment, with a strong commitment to safety, quality, and environmental protection.
• Excellent problem-solving skills, attention to detail, and ability to manage multiple priorities and deadlines effectively.
• Strong interpersonal skills, with the ability to collaborate effectively with diverse teams, clients, contractors, and regulatory authorities.

We provide Products & Services to the Oil & Gas, Petrol-Chemical, Chemical, Power & Utilities Industries. We are looking to fill up the position of 'Sales & Service Engineer'.

Job Responsibilities:

A. Sales Functions:

• To visit and provide Sales support to all after-market customers in Singapore territories, and West Malaysia if required

B. Service Functions:

• Commissioning of equipment, co-ordinations of installations of equipment, troubleshooting and technical support to customers and in-house executions.
• To write technical reports after service jobs are completed.

Job Requirements:

• Degree / Diploma in Engineering/ Technical Subjects, are preferred or equivalent.
• Salary will be commensurate based on experience and qualification
• Candidates with Sales Experience will be an advantage. Those without Sales Experience and with a good Sales attitude are to be considered.
• Candidates with Project Coordination Skills will be an advantage.
• Applicant MUST hold a valid Class 3 driving license
• Salary Package consisting of Monthly Salary & Sales Commission.
• Candidates who seek to be Professional Sales Engineers, willing to work hard and honest, will be the most suitable person to fill in this position.
• We do not provide Work Pass
• Junior and Senior position levels are available

Job Highlights

• In-house R&D and manufacturer with > 25 years of international track records
• Career development and overseas travel opportunities
• Performance bonus and special benefits
• 5 days work week (8.30 am to 6.00 pm)
• Near to Ubi MRT

Job Description

• Be part of our sales team to market the company's products and services to key CHANNEL partners and CORPORATE customers locally and overseas with some travelling
• Build solid customer relationships with key accounts and/or key channel partners
• Participate in marketing events such as seminars, trade shows, and telemarketing events

Job Requirements

• Candidate must possess at least Diploma/ Advanced/ Graduate Diploma/ Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/ Electronic), Business Studies or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): Access Control, CCTV, Integrated IP Solutions, Selling, Marketing
• Preferably Executive specialized in Sales/Support - Engineering/Technical/IT or equivalent for SALES ENGINEER position

All resumes are treated with the strictest confidence. We regret that only shortlisted candidates will be notified.

Our client is a global MNC in Chemical Manufacturing Industry. Due to business needs, they are now recruiting a Chemical Procurement Specialist to be part of their Procurement Team. They are located in the West - easily accessible (Transportation Provided)

Duties of Procurement/ Sourcing Specialist:

• Source for both Direct and Indirect Material, as well as Equipment categories.
• Prepare and consolidate monthly savings reports and pipeline data in the procurement portal.
• Develop and implement sourcing strategies and cost-saving projects.
• Collaborate with the Regional Category Team on strategy development.
• Engage suppliers and internal stakeholders to meet project milestones.
• Develop alternative suppliers and coordinate their qualification and approval.
• Assemble contracts to ensure supply security and meet procurement goals.
• Work with the Supply Chain team on inventory control, material quality, and process safety.

Requirements:

• Diploma / Degree in related field
• Min 2 - 3 years of experience in similar industry
• Proficient in SAP / Oracle system is highly preferred

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

• Electrical Supply (MNC company)
• Basic $3000 - $3500
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Working location: Tuas
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspect and test incoming and outgoing parts according to established procedures and maintain quality records.
• Report quality issues to the QA Manager and relevant department heads, ensuring non-conforming products are separated.
• Authorize the rejection of unsatisfactory parts and approve the release of conforming parts for delivery.
• Perform routine factory tests on switchboards and oversee testing and commissioning on-site or aboard vessels.
• Assist in achieving quality objectives, recommend solutions for issues, and verify their implementation.
• Ensure safety compliance, proper calibration of instruments, and maintain good housekeeping in the QA Department.

Requirements

• Min ITE/ Diploma in Electrical Engineering

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

• Prepare and provide service and spare parts quotations in response to customer inquiries.
• Carry out service tasks, including in-house repairs and on-site commissioning for various gas and water quality analyzers, CEMS, and AQMS.
• Troubleshoot analyzer issues and offer solutions to customers in line with company’s standard procedures and safety guidelines.
• Develop and nurture strong relationships with customers while delivering excellent service support.
• Collaborate with customers to address service-related concerns and provide technical solutions.
• Assist the project team with conducting Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) for projects.
• Identify new opportunities for preventive maintenance contracts and other service agreements.
• Provide product training and support to end users and distributors.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Job Description

• Provide administrative and contractual support and maintain all required project information throughout each project for claim purposes to ensure that the claim data are up-to-date and comprehensive.
• Verify the accuracy of survey data, including measurements and calculations conducted at survey sites.
• Consult with clients, vendors, personnel in other departments or construction foreman to discuss and formulate estimates and resolve issues.
• Prepare progressive claims and potential variation claims at regular intervals of the project.
• Able to read drawings and take out the quantity , prepare tender
• Maintaining proper documentation of correspondence from contract award to job completion to ensure all relevant claims are lodged accordingly to the client timely.
• Ensure proper closing-out of project account finalization.
• Able to draft letter to client or contractor for contractual issues

Job Responsibilities

• Possess a Civil Engineering Degree or equivalent
• Able to do Tender
• Proficient in using AutoCAD
• Familiar with sketchup and able to make 3D proposal for projects
• Preferably with 2 years of relevant working experience

Mandatory Skills

Job Description:

The suitable candidate will join a team of engineers and operations specialists in the support of DBS’ enterprise privileged access management infrastructure and operations. He/She will be responsible for the end to end design, deployment, operations and development of the bank’s privileged access management framework, infrastructure and processes.

Key responsibilities

• Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.
• Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privileged accounts and passwords.

Requirements

• 5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.
• Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.
• Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.
• Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.
• Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.
• Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.
• Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.
• Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.
• Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

Responsibilities:

• Develop new accounts and manage existing customers
• Evaluating sales potential and actively follow up with customers’ requirements
• Identify customers’ needs and offer technical solutions, training & application support
• Plan, forecast and materialize sales target

Requirements:

• Degree/Diploma in Electrical / Electronic Engineering with preferably 2 years’ of sales experience in the electronics industry.
• Preferably with technical background in areas relating to electrical/electronic equipment.
• Prior experience in Renewable Energy and Battery related applications experience will be a plus.
• Proficient in computer hardware and software
• Able to learn and assimilate new technology quickly
• Dynamic, Independent and able to adapt to multi-tasking environment
• Preferably have a car
• Willing to travel

5 days week (9.00 AM - 6.00 PM)

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

The Process Engineer will be based in Changi South reporting to Engineering section Lead.

In charge of process-engineering capabilities focused on cost, quality, and delivery improvements to hold up a manufacturing organization to build state of the art semiconductor equipment's.

Job Responsibilities

• Recognize the manufacturing process, technologies, techniques, and the product.
• Define, implement, and evaluate proposed designs and processes for manufacturability.
• Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process.
• High level participation in daily production activities and effective problem solving on daily issues.
• Prepare justification, purchase and implement capital equipment for production.
• Hold up and oversee new process equipment production.
• Hold up the raising and introduction of engineering change orders (ECOs).
• Establish robust, repeatable, and reproducible process parameters.
• Develop, implement, and take ownership of process control methodologies.
• Trouble shoot process related issues.
• Participate in activities pertaining to cycle time and process improvements.
• Evaluate and select various engineered materials.
• Implement statistical process research on new and existing products.
• Implement safety, productivity and give in improvements.
• Improve manufacturing techniques and throughput.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Develop and maintain process documentation.
• Review processing methods.
• Interface with production of all activities associated with new process implementation and transfer.
• Assist in the development of training and provide training to production personnel during innovative technology transfer.
• Provide equipment maintenance and repair hold up as required.
• Guide to cost improvement/reduction programs.

Job Requirements

• Typically requires a bachelor's degree in mechanical engineering or manufacturing engineering or relevant field with equivalent experience and training.
• Typically requires 2-3 years of relevant experience.
• Use of the following tools may be required: Electronic Assembly: color code, component, and schematics.
• May require various PCB operations. Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer. Inspection: bare board, systems, components, cable and harness, microscope, measuring tools. Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.
• Those will Electrical & Electronics degree with process / manufacturing experience are welcome to apply.

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 8 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Job Description:

• Provide technical support, propose solutions, and project related queries for all Wired, Wireless network.
• Perform analysis, Plan, Coordinate and Implement all change requests on existing network equipment.
• Maintain records of system details (e.g. configuration, changes, problems, disaster recovery document) for network equipment.
• Manage firewalls like Checkpoint, Cisco FTD, Palo Alto and NEXUS switches; F5 Load balancer
• · Gather business and/or application requirements on the infrastructure to plan, design, install, test & implement systems in accordance with the specifications & service level.
• · Aligned or enhanced ITSM/ITIL methodologies in daily operations e.g. Change, Incident, problem, release management & CMDB.
• · Monitor & measure the performance & availability of systems proactively; implement corrective actions identified to improve performance & service level availability.
• · Respond promptly to incident, root cause analysis & provide temporary and/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• · Implement service continuity measures, i.e., backup/restore procedures & disaster recovery plan, to ensure continuous operation of the business.
• · Create and maintain comprehensive documentation for all implemented networks.
• · Assist in preparation of proposals and solution presentations.
• · Able to lead a team of network engineers (size).
• · Attain key certifications for partnership with key vendors.

Educational Qualification:

• Years of IT Experience: 3 Years
• Work Experience: 3 Years

Responsibilies:

1. Provide Technical support and update customers on project development timely.
2. Communicate and coordinate with customers and relevant parties pertaining to technical requirements and engineering aspect of the assigned projects.
3. Plan, monitor and control all assigned projects are delivered within the given schedule.
4. Work with inter-departments to ensure commited schedules are met.
5. Assist to prepare and compile contractual quotation for existing and new products as per customers' enquires.
6. Prepare and release job orders/purchase requisition to various departments.
7. Prepare and generate shipment documents for delivery.
8. Provide regular updates on project development timely.

Requirement:

• Minimum NITEC in Mechanical Engineering or related.
• 2 years of relevant experience
• Able to interpret technical drawing and computer literate.
• Must be result oriented, resourceful and independent.