Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 2 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Responsibilities:

• Manage and oversee the day-to-day construction management of the project
• Ensure smooth completion of the project
• Ensure that all civil works are carried out in accordance with contractual requirements and completed on schedule
• Review job specifications and analyse technical drawings
• Plan, arrange and supervise civil and building work activities
• Coordinate work activities with sub-contractors and consultants
• Prepare progress reports, work method statements and forecasts
• Responsible for all aspects of quality procedures, standards and specification
• Develop method statement for the activity including risk assessment, job safety environmental analysis and inspection test plan and checklist based on specifications of the materials.
• Any other duties to be assigned from time to time

Requirements:

• Degree in Civil Engineering
• Possess strong communication, management and organizational skills
• Strong commitment to safety
• Those without relevant working experience training will be provided
• Remuneration will be paid according to experience
• Working location at Jurong Island

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Degree in Civil Engineering/ M&E Engineering

- Mininum 2 - 5 years' experience working in construction industry

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 3 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Primary Objectives of Position

· Lead teams of Senior/Assistant Engineers and Senior/Technicians to carry out overhaul/repair/servicing/testing of Rolling Stock components to meet the daily production requirement.

· Ensure teams comply with all overhaul/repair/servicing/testing requirements and related tasks with approved work instructions, quality procedures, safety and operational procedures, and good maintenance standards.

· Plan and coordinate within teams and other departments/sections to complete the assigned maintenance tasks within an established standard time.

· Ensure the teams have the necessary qualifications and authorization to carry out daily tasks and any assigned tasks.

· Attend necessary skills courses to be able to carry out maintenance and assigned tasks.

· Responsible for the safety, welfare and discipline of the teams.

· Responsible for the upkeep of the teams’ equipment/tools and working environment.

Major Responsibilities

· Responsible for the teams’ quality and standards of the maintenance works within the established standard time and in accordance with the Work Instructions and related procedures to meet the daily production.

· Develop, maintain and update Work Instruction, Risk Assessment, Procedures, Competency Management, Repair Compliance Checklist and Technical Documents relevant to the section.

· Forecast and plan the resources needed by the teams to complete maintenance tasks and assigned tasks timely.

· Conduct regular engagement sessions with the teams to understand the teams better and to feedback on their performance.

· Be familiar with the training, qualifications and authorization to ensure all staff are adequately trained and authorized to support production requirement such as overhead crane operator, forklift driver etc.

The above activities are no means exhaustive and are subjected to amendment whenever is needed

Specific Safety Responsibilities

· To comply with SBST’s Safety, Health and Security Policies

· To ensure technical staff and contractor are competent trained and certified to perform the servicing works.

· To implement and conduct of periodic safety inspection and safety to ensure compliance with the specific standards.

· To ensure that the maintenance and modifications work performed on the equipment and repairable by the workshop is compliance with the safety standards and operating specifications.

· Responsible for the ensuring of the implementation Safety within the team.

Job Specifications

Minimum Education / Qualifications

· Recognized Bachelor's degree in electrical/Electronics/Mechanical/Mechatronics Engineering from a reputable university.

Minimum Years of Relevant Experience

· Preferably at least 3 years of of relevant working experience in systems maintenance/repair/overhaul.

Knowledge/Skills

· Good knowledge in electrical, electronic, mechanical and pneumatic systems of electric train.

· Good fault-finding skills.

· Knowledge on Diagnostic Software packages.

Attributes (functional & leadership competencies)

· Strong troubleshooting and analytic skills.

· Good interpersonal, management and communication skills.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Description:

Responsible for substrate technology roadmap development and substrate technology integration with a focus towards Package Technology Development, Advanced Package Technology, and Package NPI execution. The engineering position works closely with Substrate Suppliers, Assembly Technology Development, and Assembly NPI teams to develop Micron's specifications ensuring a successful launch of new substrate technology. The Substrate Team resides in the Global Design Simulation and Substrate (GDSS) group of the Package Development Engineering organization that is responsible for the design, development, and assembly of Micron's product portfolio; MCP, UFS, SSD BGA, NAND, DRAM, GDDR, LPDDR, and ASIC products. This position will be based in Singapore with primary support to NPI's launched in Singapore, Malaysia, and India.

Candidate must have extensive experience in substrate development and substrate fabrication processes with a working knowledge of packaging assembly and technology, and finally proven customer support skillset. This position requires global support resulting in work hours that support Asia time zone and reports to leadership in the US.

Qualifications:

• The applicant should have a Bachelor of Science degree or higher in Material Engineering, Mechanical Engineering, Chemical Engineering, Electrical or Electronics Engineering or related field with 15+ years of relevant experience.
• Strong influencing and stakeholder management skills - excellent executive communication skills
• Solid track record of collaboration and building and strengthening partnerships
• Excellent analytical and problem-solving skills with the ability to lead and work effectively with a team
• Good english communication skills are required

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 5 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 5 years of ASIC design experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 8 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

• Co-lead with the Program Manager and manage project from NPI to mass production transfer.
• To ensure NPI project is successfully completed by meeting all specification and requirement.
• Design project plan, execute and completer all tasks within the stipulated time frame and budget.
• Attend tool trial, part evaluation, technical problem analysis and problem solving.
• Liaising internally with project team members and externally with customers on technical matters.

We specialize in providing innovative solutions for the implementation, installation, commissioning and maintenance of IoT, SCADA, Remote Monitoring, Security and Process Control Systems

Responsibilities

• Use designer tools to define delightful, animated, user-friendly SCADA screens, so that information is shown correctly, easy to read and find
• Use of configuration tools to configure IO points to interface with field controllers
• Plan and perform in-house/on-site software testing activities, retrieve and analyze log files, as well as assist in implementing technical fixes, patches and upgrades
• Timely report of work progress, issues to direct supervisor
• Any ad-hoc task as assigned by manager

Prerequisites

• Diploma in Engineering or any other similar disciplines
• Work or internship experience in any of the 3rd party SCADA system (such as Wonderware, iFix, Citect, Ignition)
• Able to work independently, meticulously and outcome driven with good eye for details
• Take ownership of UI design work is a must
• Able to interact and communicate effectively with people of different levels and cultures, and provide timely delivery of assigned work

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Company Summary:
Since 2002, DVI Solutions has been a leading provider of audio-visual setups to help our clients communicate and collaborate better--whether it's with colleagues across the office, or partners on the other side of the world. We have presence across Singapore, Thailand, Shanghai, Hong Kong, Philippines, Vietnam, India, Malaysia and Indonesia. Our satisfied clients include corporations, government agencies, schools, retail stores, hotels and many more.

Position Summary:

This role would focus on our Workplace Technology Solutions (WTS), a brand-new vertical at DVI Solutions. It focuses on the deployment of IoT systems and solutions within Corporate Real Estate (CRE) projects to collect, aggregate and compute data that is presented on a customized dashboard to provide data-driven actionable insights for various corporate stakeholders.

Responsibilities:

Project

· Regular site visits to ensure quality service and smooth operations for clients.

· Pre-sales solution design and quotation generation

· On-site work such as installation supervision (cabling, mounts, sensors/devices) and configuration of local IoT/networking system

· Liaison with vendors, clients, contractors and overseas DVI project teams

· Remote access work such as configuration of WTS system and client onboarding

· Execution of UAT

· End to end project documentation such as Requirements Gathering, Sensor Master List, Sensor Deployment Plan, Functional Sign-Off, UAT, Operation and Maintenance Manual.

Maintenance

· L2 client support (remote and on-site)

· L3 client support (liaison with vendor to fix bugs within vendor's system and/or activation of device RMA to vendor)

Product Testing

· In-depth testing of WTS vendor product functions/features to uncover bugs to be fixed

· Setup of test IoT system and environment in DVI Office (WTS hardware and software - cloud/on-prem backend and/or frontend)

Required Education/Experience:

· Diploma in Electrical & Electronic, IT, IoT, Infocom, Computer Engineering, Robotics or related

· 2 years of working experience in IoT Systems, Access Control, Surveillance, Building Management System, Cloud (Azure/AWS), Computer Networking or related

· Prior experience as a project engineer with the construction industry (main contractor or M&E sub-contractor) would be advantageous

DVI Solutions is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status.

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 5 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

• Aid the Project Manager in overseeing Quality-related concerns.
• Evaluate consultant drawings and specifications.
• Review QA/QC plans, create checklists, inspections, and procedures.
• Verify that the tasks are executed in alignment with Contract specifications, drawings, and all contractual documents, adhering to regulatory authorities and technical department prerequisites.
• Assist in project tasks at the construction site.
• Contribute to achieving ISO Certification.

Requirements

• Possess a Civil Engineering degree or a related field of study.
• Hold at least 3 years of on-site experience, preferably with LTA.
• Demonstrate proficiency in quality management procedures for construction and building works.

Reg no. R1659970

Role and responsibilities

· Execute projects within their emplaced practice to ensure service delivery and support to meet the intended availability, continuity, and capacity requirements.

· Work with service providers to design, develop, deploy and configure infrastructure to meet resiliency, availability and data integrity needs.

· In charge in ensuring the compliance to Authority’s Technical Architecture.

· Conduct Infrastructure projects and services to support application systems environments.

Skills and experience

· Minimum of Diploma or Degree in Information Technology or any related field.

· At least 5 years of hands-on experience in relevant fields such as Windows, Linux RHEL and AIX OS, OS virtualisation technologies, SAN storage and/or databases.

· Capability to take a broad, strategic perspective as well as drill deep to understand business needs and challenges.

· Capacity to analyse and identify comprehensive solutions considering all functional implications while developing a workable solution.

HOW TO APPLY:

We would like to invite interested applicants to email detailed resume in MS Word format to: [email protected]

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

We regret to inform you that only shortlisted candidates will be notified. All applications will be treated with the strictest confidence.

Joane Carrido
Registration number: R1770751

EA Licence No: 12C6253

· Ensure that standards and safety regulations are observed

· Address and discuss issues and proposed solutions with superiors

· Document quality assurance activities and create audit reports

· Make recommendations for improvement

· Create training materials and operating manuals

· Preparing and implementing quality assurance policies and procedures

· Performing routine inspections and quality tests

· Identifying and resolving workflow and productions issues.

· Prepare ISO9000 for yearly audits

· Some technical background on electronics or mechanicals

· Polytechnics diploma or equivalent