Job Responsibilities: -

1. Supervise motor inspection and overhaul service work to ensure efficient and effective maintenance work, compliance with safety regulations and quality standards.

2. Conducting motor assembly, testing, and problem solving. Determine the motor status based on test results and issue motor test reports.

3. Improve work method, quality management systems, and workflow to enhance maintenance processes.

4. Provide technical support for motor pre/post-sales activities, including technical knowledge training for customers, ensuring customer satisfaction.

5. Develop and implement motor inspection, maintenance, and diagnostic plans for products, providing field technical guidance and process supervision.

6. Perform motor fault diagnosis, including vibration analysis, temperature monitoring, electrical testing, and insulation checks, etc.

7. Analyze and resolve motor-related problems to ensure optimal performance and reliability.

8. Train and upgrade the skills of workers in motor maintenance processes, including testing, assembly, insulation, repair, etc.

Requirements:-

1. Degree in Electrical Engineering or related field (preferred). Hands-on experiences in motor overhaul maintenance and technical support.
2. Possess years of experiences in motor repair and testing, diagnostics and troubleshooting.
3. Familiar with the maintenance, overhaul and testing of various high-voltage and low-voltage motors.
4. Preferably with class-3 driving license.

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Job Responsibilities:-

1. Primarily responsible for the development of wireless vibration temperature data acquiring solutions for industrial enterprises and rotating equipment ends, managing the entire process from pre-sales solution design to project delivery for major client projects. This includes PHM requirement analysis, technical solution design, and product development.
2. Responsible for the on-site delivery management of industrial IoT projects, including on-site engineering design, network setup, system upgrades, equipment IoT integration and debugging, performance testing, and configuration of SaaS software functions on the cloud.
3. Conduct vibration analysis for rotating equipment using Vibration Analyzer. Analyse vibration data to identify potential issues and recommend appropriate corrective actions.
4. Communicate effectively with suppliers and customers regarding technical solutions.
5. Responsible for training and knowledge transfer to customers to ensure they can effectively use the PHM platform. Additionally, tasked with identifying new functional requirements from customers and providing feedback to product development for adjustments, maintenance, and optimization of existing features.

Requirements:-

1. Possess minimum 3 years of experiences in vibration condition monitoring-related fields, with familiarity in IoT, big data, artificial intelligence, cloud computing, and other industrial internet domains.
2. Experience in implementing vibration condition monitoring projects for industrial enterprises and system integration, with a background in rotating equipment diagnosis & maintenance, and industrial IoT project implementation.
3. Understanding of the IT/software integration industry, basic knowledge of IoT, and the product architecture of platform+SaaS applications.
4. Preferably have a Bachelor’s degree or above in engineering, with strong business communication and pre-sales solution development skills. Must have a self-driven business approach, be outgoing, diligent, and possess a rigorous professional demeanor.
5. Possess valid SG class-3 driving license

Job Responsibilities

• Prepares Primavera P6, to monitor the progress and substantiate time and cost entitlements.
• Prepares preliminary master schedule for pre-tender, tender and contract programmes.
• Prepares and maintains an intergrated schedule of drawings, procurement, construction, test & trials, integrated logistic plan using Primavera P6.
• Prepares baseline schedule which includes resource loading using Primavera P6.
• Identify descrepancies, delay and provide recovery schedule to Project Manager.
• Assist with the preparation of Extension of Time (EOT) claims, including presentations to clients.
• Prepares progress reports and progress audits, inclusing S-Curves, progress trackers and programming health checks.
• Prepares receovery programmes and presentations summarising key recovery strategies.
• Prepares detailed commissioning programmes
• Prepares baseline schedule which includes resource loading and cost loading.
• Provides advise on post-contract claims, reviews, disputes and litigation on programming.
• Any other ad-hoc duties as assigned by superior.

Job Requirements
• Degree in Civil Engineering or equivalent
• Min. 2 -3 years experience in the same field or equivalent
• Must have Primavera P6 Certificate
• Good team player and ability to work in a fast-paced environment
• Hands-on experience with Primavera for (2 to 4 years experience)

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

We are looking for an L1+L2 App Support Engineer to join our dynamic team! You will play a crucial role in ensuring the smooth operation of applications and providing technical support to end users.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Be part of a collaborative and supportive team that encourages growth.

Responsibilities:

• Provide assistance to users, addressing inquiries, troubleshooting issues, and quickly implementing solutions to restore systems to full functionality.
• Keep detailed documentation of user interactions, reported problems, solutions applied, and any further actions needed by management or tier 2 support.
• Create user manuals and troubleshooting guides to aid both support teams and users in effectively interacting with the system.
• Work closely with L3 Technical staff and the project manager to set objectives and plan system upgrades and improvements.
• Develop and implement new procedures to boost efficiency, enhance customer satisfaction, and reduce operational costs.

Job Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Prior experience with some programming languages (HTML, JAVA) will be an added advantage.
• Good writing and communication skills.
• Strong troubleshooting and problem-solving skills with experience in identifying and resolving complex technical issues.
• Experience with ticketing systems (e.g., JIRA, ServiceNow) and version control tools (e.g., Git) is a plus.
• Prior experience in supporting mobile or web applications is an added advantage.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Research Engineer/ Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges.

We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will work closely with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

• Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.
• Implement MLOps best practices to automate model training, deployment, and monitoring processes.
• Implement and optimize machine learning algorithms and deep learning architectures.
• Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.
• Optimize AI pipelines for scalability, reliability, and performance.
• Conduct performance analysis and optimization to improve model efficiency and accuracy.
• Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

• Bachelor or Master Degree in Computer Science/Engineering or relevant disciplines
• Must have a minimum of 8 years of experience as a Software Developer/Engineer
• Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerisation Technologies
• Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular
• A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)
• Can do attitude and happy to interface with multiple stakeholders
• Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail
• Excellent verbal and written communication skills
• Hands-on experience with machine learning frameworks/libraries
• Understanding of machine learning algorithms and techniques
• Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

ABOUT THE ROLE

We are seeking a highly motivated Research or Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. If you are independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges, this is the role for you.

JOB DESCRIPTION

• Develop, test, and maintain enterprise planning systems and applications.
• Analyze complex problems related to resource planning and scheduling, identifying potential solutions, and implementing the most effective one.
• Collaborate with other developers and stakeholders to deliver high-quality software products.
• Deploy software to production environments and provide ongoing maintenance and support to customers.
• Take responsibility for documenting code with technical specifications, user manuals, and other documentation to facilitate understanding and maintenance by other team members.
• Identify and address bottlenecks, inefficiencies, and scalability issues to ensure optimal performance of the software system.

JOB REQUIREMENT

• Bachelor's or Master's Degree in Computer Science or Engineering or relevant disciplines.
• Minimum of 5 years of working experience as a Software Developer/Engineer

We value the following technical skills:

• Hands-on experience in Cloud Native Technologies such as microservices, DevSecOps, and Container Platforms
• Proficiency in designing and developing microservices using at least one programming language, preferably C# .NET.
• Good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)

We also value the following soft skills:

• Can-do attitude and willingness to interface with multiple stakeholders.
• Excellent troubleshooting, follow-through, and problem-solving skills, with attention to detail.
• Excellent verbal and written communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hours: Monday - Friday (8:30am - 5:30pm)
• Location: Woodlands North MRT

Job Scope:

• Design, test, troubleshoot, and commission company products, including jigs, fixtures, and both semi-automatic and fully automatic custom machines
• Participate in customer meetings to discuss project requirements and proposals for new initiatives
• Conduct research and develop innovative ideas to improve the company’s performance and competitiveness in industrial automation
• Assist in or manage the procurement of required materials and equipment to support the execution of these tasks

Requirements:

• Minimum ITE, Diploma, or Degree in Mechanical Engineering
• At least two years of experience in customized automation machine design
• Experience in customized semi-conductor, connector, or machine design is preferred
• Knowledge of Solidworks is preferred; familiarity with Pro-E and Inventor is an added advantage
• Strong intuition for mechanical movement, function, and performance. Good understanding of 2D and 3D objects
• Strong understanding of machining processes
• Intrinsic desire and passion for designing high-performance machines
• Able to communicate technical concepts well in English
• Able to work effectively in a relatively stressful environment

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Ensure operational excellence and regulatory compliance in the centre.

Responsibilities:

• Provide operational support in the centre day-to-day and during center events
• Support the organization operations and research need through the workshops/laboratories, offices, building infrastructure and premise security management
• Conduct daily walkabout in the centre to ensure the centre is in good operational condition, uncompromised security and safety compliance
• Ensure a safe working environment within the centre
• Track, maintain and order the operational inventories and maintain a systematic filing system
• Work closely with in-house contractors for facilities feedback to keep the centre in a daily operational state
• Assist in liaising and sourcing of vendor for quotation, equipment, service and monitor the contractor work?s quality, schedule and ensure safety during the execution
• Handle requests and queries from staff and management
• Work together with internal stakeholders/partners to support the entity in center operations
• Assist in executing corporate facilities related projects
• Investigate, check and analyze reported on any workshop and laboratory breakdown
• Facilitate in the facilities related SOPs, Forms and presentation materials
• Perform essential handyman work when needed
• Assist in statutory audit and internal audit
• Any other duties assigned by supervisor

Job requirements

• At least diploma in related field (Facilities / Safety / Operations)
• Minimum 5 years of relevant experience in operations for workshop, laboratory, facility, building services, electrical and mechanical
• Willing to be scheduled to occasionally work off shift hours in support of operations
• Able to breakdown the assigned work into deliverable tasks and provide realistic timeline for their completion
• Competency in Microsoft Office, AV system. Experience in office outfitting/ relocation projects is added advantage.
• Experience in supervising contractors, facility management and their sub-contractors
• Some understanding in the HS&E requirement
• A self-driven and meticulous individual who has the strong ability to multi-task

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Research Engineer/ Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges.

We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will work closely with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

• Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.
• Implement MLOps best practices to automate model training, deployment, and monitoring processes.
• Implement and optimize machine learning algorithms and deep learning architectures.
• Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.
• Optimize AI pipelines for scalability, reliability, and performance.
• Conduct performance analysis and optimization to improve model efficiency and accuracy.
• Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

• Bachelor or Master Degree in Computer Science/Engineering or relevant disciplines
• Must have a minimum of 5 years of experience as a Software Developer/Engineer
• Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerisation Technologies
• Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular
• A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)
• Can do attitude and happy to interface with multiple stakeholders
• Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail
• Excellent verbal and written communication skills
• Hands-on experience with machine learning frameworks/libraries
• Understanding of machine learning algorithms and techniques
• Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

ABOUT THE ROLE

We are seeking a highly motivated Research or Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. If you are independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges, this is the role for you.

JOB DESCRIPTION

• Develop, test, and maintain enterprise planning systems and applications.
• Analyze complex problems related to resource planning and scheduling, identifying potential solutions, and implementing the most effective one.
• Collaborate with other developers and stakeholders to deliver high-quality software products.
• Deploy software to production environments and provide ongoing maintenance and support to customers.
• Take responsibility for documenting code with technical specifications, user manuals, and other documentation to facilitate understanding and maintenance by other team members.
• Identify and address bottlenecks, inefficiencies, and scalability issues to ensure optimal performance of the software system.

JOB REQUIREMENT

• Bachelor's or Master's Degree in Computer Science or Engineering or relevant disciplines.
• Minimum of 2 years of working experience as a Software Developer/Engineer

We value the following technical skills:

• Hands-on experience in Cloud Native Technologies such as microservices, DevSecOps, and Container Platforms
• Proficiency in designing and developing microservices using at least one programming language, preferably C# .NET.
• Good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)

We also value the following soft skills:

• Can-do attitude and willingness to interface with multiple stakeholders.
• Excellent troubleshooting, follow-through, and problem-solving skills, with attention to detail.
• Excellent verbal and written communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

As a Project Engineer specializing in structural steel construction, you will play a pivotal role in the planning, execution, and completion of our projects. Working closely with our project managers, you will oversee all aspects of construction, ensuring adherence to timelines, budgets, and quality standards. This is an excellent opportunity for a talented individual to make a significant impact in the dynamic field of construction engineering.

Key Responsibilities:

• Collaborate with project managers to develop project plans, schedules, and budgets for structural steel construction projects.
• Conduct thorough site assessments and surveys to identify potential challenges and ensure compliance with regulatory requirements.
• Coordinate with architects, engineers, subcontractors, and suppliers to facilitate the timely procurement of materials and resources.
• Manage day-to-day construction activities, including site logistics, safety protocols, and quality control measures.
• Monitor project progress and performance, identifying and addressing deviations from plans and specifications.
• Provide technical expertise and problem-solving support to resolve construction-related issues effectively.
• Prepare and review engineering drawings, specifications, and documentation to ensure accuracy and completeness.
• Foster a culture of teamwork, innovation, and continuous improvement among project team members.

Qualifications:

• Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.
• Minimum of 2 years of experience in project engineering, preferably in the structural steel construction industry.
• Proficiency in Tekla software.
• Strong understanding of construction principles, practices, and techniques.
• Excellent communication, leadership, and interpersonal skills.
• Ability to manage multiple priorities in a fast-paced environment.
• Familiarity with Singapore building codes, regulations, and industry standards.
• Immediate availability will be preferred

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are a growing engineering consulting company based in Singapore, seeking for a high performing professional to join us as an Executive Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Under the supervision of Senior Engineers, to perform initial engineering task on the mechanical services detailed design for building projects
• To prepare submission to authorities for approval of design
• To attend to project meeting with Client, PM and Consultants from other disciplines
• To attend site project meeting and site inspection and respond to technical queries
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• Handle client liaison and reporting
• Liaise with authorities on plans submission and compliance

Key Requirements

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore will be an advantage
• Minimum 3 years’ experience in the design & supervision of building service projects (Those with 5 years’ experience and/or Certified Professional Engineers will be considered for a senior position).
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Reporting to Technical & Planning Department Manager, this position will provide technical and process safety support for the manufacturing process to ensure production complies strictly with Company’s quality & safety standards and environmental regulations. This role will also be in charge of performing investigation to identify root causes for plant troubles and implement countermeasures and driving plant optimization initiatives.

Responsibilities:

• Oversee plant performance, issue operating instructions, conduct root cause analysis, investigate process failures, and recommend appropriate solutions or corrective actions.
• Coordinate Safety Case activities and liaise with other departments to ensure completion of all follow up actions.
• Lead HAZOP studies and other process safety assessments
• Handle raw materials and utility consumption analysis and efficiency improvement drive, which include managing evaluation meetings and following up on action plans and other operational tasks.
• Plan and conduct trial production for new products or raw materials, and initiate optimization ideas for process and process safety improvements
• Perform technical and process safety studies and share knowledge with other team members
• Conduct training for Plant members and in-house contractors
• Coordinate Management of Change and support plant investment projects such as budget planning, monitoring project progression and scheduling project meetings
• Maintain and improve Integrated Management System such as developing standard operating procedures and maintaining proper certification and documentation.
• Anticipate potential operational issues and recommend appropriate corrective actions.
• Promote continuous development and implementation of improvement ideas to enhance manufacturing competitiveness level

Requirements:

• Master’s Degree in Chemical Engineering or Polymer with 7 to 12 years or Bachelor’s Degree in the same discipline with 9 to 14 years of relevant working experience in Chemical Engineering in a polymer plant
• Strong leadership and communication skills and effective team player
• Self-motivated, independent and resourceful
• Proficient in Microsoft Office applications
• Knowledge in HAZOP, Risk Assessment, DCS, ISO standards would be advantageous
• Proficient in Japanese language as the role is required to liaise with counterparts and understand the Company policy and standards from Japan Headquarters
• Able to perform overtime work when required
• Willing to work in Jurong Island
• Overseas travelling is required

Job Description& Responsibilities:

· Responsible for advanced optical module/ethernet product hardware system and circuit design, provide design reviews, drive system/product design trade-offs, make data driven design choices to define product architecture

· Responsible for new product design verification and characterization, conduct high- speed link simulation, failure analysis and debugging in NPI stages to optimize design and ensure performance.

· Work with cross-functional teams to develop new products that are time to market and superior in performance, quality and cost.

· Contribute to optical transceiver module/ethernet product architecture and engineering specifications based on product and customer requirements.

· Perform system performance validation and DVT test plans, debug and analyze test results.

· Provide design documentation and technical reports.

Qualification:

· Bachelor/Master degree or above in electrical or electronics engineering or related fields.

· More than 7 years of working experience in optical module/networking switch or relevant products design and development.

· Sound knowledge of optical transceiver standards, architectures and applications, well understanding of design & trade-offs with respect to size, power consumption, thermal management and manufacturing complexity.

· Solid understanding of high speed signal integrity and power integrity analysis and optimization on PCB/system channel link analysis, well versed in modeling and simulation using tools such as HFSS, ADS, SIWAVE, LTSPICE etc.

· Familiar with high speed digital and analog ICs (CDRs, DSPs, SerDes, TIAs, DC-DC Converters, LDOs).

· Knowledge in IEEE 802.3 Ethernet and PCIe spec will be a plus.

· Extensive experience with lab equipment such as Sampling Scope, RealTime Scope, Protocol Analyzer, BERT, PNA/VNA.

· A solid team player with strong leadership and inter-personal skills, able to take proactive, collaborative and creative approaches to innovate and influence for optimal results.

· Strong written and verbal communication skills.

· Willing to travel as require.

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job details

Salary

$3,000 - $6,000 a month

Job type

Full-time

Responsibilities: -

• Provide technical support to Operating Plants for safe & smooth plant operations
• In charge of daily chemical & mechanical processes.
• Initiate and implement plans for performance improvement and economic / capacity optimization
• Perform plant simulation to identify high return opportunities to business team
• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to Plant instability, Safety or Quality issues.
• Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.
• To in charge of equipment calibrations.
• To update production output regularly.
• All other ad-hoc duties as assigned

Requirements: -

• Min Diploma or with min 3 years relevant working experience can be considered as well.
• Competency in Microsoft applications including Word, Excel and Outlook.
• Able to liaise with English and Mandarin speaking customers
• 5.5-days work week.
• Location: Tuas South
• Able to start work immediately
• PR/Singaporean

Please note that only shortlisted candidates will be notified.