This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Role: Electrical Engineer

Permanent Position

Location: Central, Singapore (Outram)

Key Responsibilities:

· Perform daily, weekly, and monthly maintenance on the system, including testing, inspection, adjustment, and calibration tasks, both at heights and within equipment enclosures.

· Maintain, test, and troubleshoot key systems, including:

o Accelerator systems

o Irradiation devices

o Patient alignment systems

o Safety interlock systems

· Monitor the operation of the system and identify areas for performance improvement.

· Adopt and integrate new technology, products, and processes to enhance system functionality.

· Respond promptly to service calls, ensuring timely resolution and customer satisfaction.

· Fulfill work orders, submit reports (including timecards, working reports, and expense reports), and adhere to company and customer procedures.

· Assist with troubleshooting and commissioning activities when necessary.

· Ensure compliance with regulatory standards, including radiation safety regulations, company policies, and applicable laws.

· Work with high-voltage equipment, magnetic fields, and in radiation-prone environments.

· Rotating shift work is required. (First Shift: 05:00 – 14:00 / Second Shift: 13:00 – 22:00)

Requirements:

· Diploma or higher in engineering or related disciplines.

· Experience in maintenance or field service.

· Proficient in reading and interpreting engineering documents (e.g., schematics, circuit diagrams, piping diagrams).

· Experience using electronic test and measurement instruments such as DVM, oscilloscopes, and micrometers.

· Capable of working independently as well as collaboratively within cross-functional teams.

· Excellent communication, problem-solving skills, and attention to detail.

· Ability to understand and troubleshoot complex equipment and systems.

· Familiarity with Microsoft Word and Excel.

· Comfortable with working at heights and lifting up to 20 kg repeatedly.

· A customer-focused mindset with a strong sense of teamwork.

Our Client:

Our client is one of the Japanese global leaders providing Fluid and Precision Machinery to the various industries. They are actively seeking for a Field Service Engineer (Chiller) to join their team in Singapore.

The Responsibilities:

• Schedule maintenance activities for chillers system, keeping track of maintenance works with follow up actions for chillers
• Ensure all maintenance works are carried out according to prescribed checklist and schedule
• Responsible for testing & commissioning/fine tuning of new chiller with minimal guidance, such as coordinate project execution at site, witness FAT and conduct SAT to ensure the chiller operating conditions according to target performance
• Ability to interpret as-built documents, schematic drawings, technical documents as well as analyse operating data from chillers and know how to identify and repair any issues that arise
• Responsible for on-site management of the chiller overhaul/repair works, and supervise subcontractor work; effectively control the service quality and progress
• Preparation of service report for each service assignment
• Assuage dissatisfied customers on service issues such as provide prompt and effective resolution to technical problems on chiller and recommend preventive measures
• Preparation of risk assessments prior and ensure safety procedures and conduct during service or repairs
• To ensure all works carried out safely and/or in accordance with safety procedures
• Any other tasks, when required by Department Manager

The Requirements:

• Minimum ITE certificate with Merit or diploma in Mechanical Engineering with 3 years of relevant chiller experiences
• Able to troubleshoot HVAC faults especially modular screw chillers, centrifugal chillers and absorption chillers
• Good communication skills both verbal and written as well as preparing service reports
• Good safety and WSH habits
• Short term overseas assignments may be required

RGF Privacy Policy – https://www.singapore.rgf-professional.com/privacy-policy

Disclaimer: The Company complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of their age, race, religion, nationality, marital status, or family responsibilities. A more detailed discussion of the TGFEP is available on the Tripartite Alliance for Fair and Progressive Employment Practices (TAFEP) website at https://www.tal.sg/tafep.

JO Reference: 107047

• Be part of advanced technologies and solutions for power solutions.
• Be exposed to cutting-edge technologies and solutions.

About Our Client

The company provides cutting-edge tools such as battery monitoring systems, power grid monitoring solutions, and maintenance technologies designed to enhance the reliability, efficiency, and performance of utility grids and backup power systems. Serving industries such as data centers, utilities, telecommunications, transportation, and healthcare, the company enables customers to implement condition-based maintenance, ensure regulatory compliance, and extend asset lifespans.

Job Description

Key Responsibilities

• Provide technical service and support for products.
• Perform testing and commissioning, including site acceptance tests in collaboration with consultants and end-users.
• Diagnose and troubleshoot issues in customer installations and products.
• Maintain and execute service agreements with customers, ensuring adherence to contractual service levels.
• Provide guidance and expertise during new product installations and represent the company at on-site installation meetings to resolve field issues promptly.
• Conduct technical seminars for customers and channel partners, and represent the company at trade shows and special events.
• Offer feedback to Product Management regarding market conditions, product enhancements, and necessary upgrades.
• Prepare and submit weekly reports highlighting site-specific issues, customer concerns, or product performance challenges.
• Assist customers during the initial design phase and ensure proper application of Grid Solutions products.
• Deliver specialized training and operational documentation to customers to support their needs.
• Provide on-call support for customer installations and maintenance, including after-hours and weekend support as required.
• Undertake overseas travel within the Asia region for installations and maintenance projects.
• Perform other related duties as assigned.

The Successful Applicant

Requirements

• Bachelor's Degree in Electrical Engineering or a related field, or a Diploma in Electrical Engineering with relevant experience.
• At least 3 years of technical, sales, or related experience in Grid systems or the electrical industry.
• In-depth understanding of critical asset monitoring systems, including Battery Systems, UPS, and Battery Monitoring Systems, with experience in data center battery management and maintenance preferred.
• Excellent interpersonal, presentation, and communication skills to build strong relationships with customers, consultants, and end-users.
• Ability to work independently with exceptional organizational and problem-solving skills.
• Self-motivated, energetic personality with a customer-oriented approach.
• Proven ability to interpret technical instructions in mathematical or diagram form and resolve issues involving multiple variables.
• Demonstrated ability to plan and prioritize tasks effectively, including occasional support for team planning.
• Previous sales or service experience is an advantage.
• Maintains confidentiality and exercises discretion with sensitive business information.

What's on Offer

The client offers candidates an exciting opportunity to be part of a globally recognized leader in critical power grid technologies. Joining the team means working with cutting-edge solutions that drive innovation in power reliability and asset management for diverse industries like data centers, utilities, and telecommunications. Employees benefit from a dynamic, collaborative work environment with opportunities for professional growth, regional exposure across the Asia Pacific and Middle East, and hands-on experience with advanced technologies. The company provides comprehensive training, a competitive compensation package, and opportunities to represent the brand at high-profile events, trade shows, and seminars. For individuals passionate about technical excellence and customer satisfaction, the client offers a rewarding career path with significant impact on the future of energy and power systems.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-012025-6632825

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N

Job Scope:

• Install, maintain, and repair equipment and systems at customer sites
• Conduct regular inspections and preventive maintenance on equipment
• Troubleshoot and diagnose technical issues in the field
• Provide training and support to customers on equipment usage
• Prepare and maintain service reports and documentation
• Collaborate with internal teams to resolve customer issues
• Ensure compliance with safety and quality standards
• Manage inventory of spare parts and tools for on-site work
• Communicate effectively with clients to understand their needs and provide solutions

Requirements:

• Nitec/Higher Nitec in Mechatronics/Mechanical Engineering or Diploma in Mechanical/Electrical Engineering
• At least 2 years of hands-on experience in equipment servicing and repair
• More experienced candidates may qualify for higher positions
• Good command of written and spoken
• Ability to write simple reports
• Responsible, hardworking, and able to work independently
• Positive work attitude and eagerness to learn new skills
• Capable of working under tight schedules

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities

• Install, configure, and upgrade computer hardware and software
• Troubleshoot and resolve a wide range of IT issues, including network connectivity, printer problems, and software malfunctions
• Audio and Video equipment Support including Health Checks
• Implement effective troubleshooting strategies to resolve issues promptly and efficiently
• Support for network issues including setup, installation and supporting the configuration as needed, testing circuits, connectivity, and validation of network equipment.
• Image and install software on Windows, and Apple laptops/desktops including IMAC (installations, moves, additions, and changes) and Remote support

Requirements

• Degree in Computer Science or related field
• Minimum 3 years of hands-on experience providing IT support in deskside, remote desktop, or field environments
• Skilled in efficient Windows OS imaging processes
• Proficiency in troubleshooting network connectivity issues
• Knowledge of networking protocols, such as TCP/IP, DNS, DHCP, and routing protocols
• Prior experience in Telcom industry as Field Services Technician will be added advantage

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Job Description & Major Responsibilities

Service Engineers install, service, support, upgrade and maintain SCREEN equipment. Training is provided to support multiple equipment types. They perform a variety of moderate to complex assignments, diagnose equipment problems and make repairs or adjustments. Understand system parameters and interactions to allow process development and extensive electronic-mechanical troubleshooting on the equipment.

Being a Service Engineer, this person is to support the team in meeting customers’ expectations and company’s expectations. This person must be able to support machines and technically inclined. He is the direct support on machines at customers’ fab and the workforce to ensure customer satisfaction amongst our customers.

· To attend weekly meeting and presentation

· To write technical report

· To handle specific jigs during service jobs

· Assist senior colleagues to perform higher-level job like robot teaching & sub-units

· To perform 24x7 standby duties based on roster

· To perform ad-hoc shift work when needed when required.

· To perform ad-hoc delivery work

Desired Qualifications / Requirements / Competencies:

· Diploma in Electronics/Electrical /Microelectronics Engineering. Might consider ITE with experience

· Cleanroom working experience preferable but not a must

· Machine setup/installation/modification/servicing/trouble shooting/repair

· Willing to travel occasionally

· Able to work irregular hours when required

· Fresh graduates will be considered

· Proficient in Microsoft Office programs

· Demonstrate ability to work effectively with team members and customers

· Excellent troubleshooting and repair skills

· Require good communication skills, documentation and customer service skills

Responsible for providing on-site technical support, troubleshooting, and maintenance for IT systems, hardware, and software. This role involves frequent travel to client or company sites to ensure systems are operational and optimized. The engineer will also assist in deploying new technologies, conducting system upgrades, and providing end-user training where required.

• Provide on-site support for hardware and software issues, including desktops, laptops, printers, and network devices.
• Diagnose and resolve technical problems promptly, minimizing downtime for end users.
• Install, configure, and test IT hardware and software as per company or client standards.
• Assist with the setup and installation of servers, routers, switches, and other network equipment.
• Conduct on-site rollouts for new IT projects, including device imaging, software deployment, and system upgrades.
• Conduct routine checks on IT infrastructure, ensuring optimal performance and identifying potential issues.
• Document common user issues and solutions for knowledge-sharing purposes.
• Maintain accurate records of on-site visits, tasks performed, and issues resolved.

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Field Application Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Field Application Engineer:

• Provide technical support to customers and contractors, addressing product and application-related queries.
• Perform on-site measurements and system evaluations to identify opportunities for improvement and optimization.
• Conduct technical training sessions for stakeholders.
• Assist in product quality control through thorough testing and analysis.
• Handle additional assignments as required, showcasing flexibility and adaptability.

Requirements:

• Diploma or Degree in Engineering Discipline or similar field
• Relevent experience
• Experience with Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Responsibilities

• Installing and configuring computer hardware, software, systems, networks, printers and scanners

• Investigating, diagnosing and solving computer software and hardware faults

• Repairing equipment and replacing parts

• Managing inventory records of hardware, equipment, software

• Managing stocks of equipment, consumables and other supplies

• Trouble shooting PC Hardware, Notebook, PDA, Printer/Print Server, MS Win 2K-Vista, Internet Browser, Standard Microsoft, Lotus Notes Client and other in-house application problems.

Requirements

• Degree / Diploma in Electronics / IT or equivalent.

• Have 1 -2 yeas of relevant experience in supporting PC/Network Hardware, Network, Printer

• Field Engineers are expected to be able to interact well with users and work co-operatively with IT colleagues in other disciplines to successfully support end-users.

Licence no: 12C6060

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Field Application Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Field Application Engineer:

• Provide technical support to customers and contractors, addressing product and application-related queries.
• Perform on-site measurements and system evaluations to identify opportunities for improvement and optimization.
• Conduct technical training sessions for stakeholders.
• Assist in product quality control through thorough testing and analysis.
• Handle additional assignments as required, showcasing flexibility and adaptability.

Requirements:

• Diploma or Degree in Engineering Discipline or similar field
• Relevent experience
• Experience with Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Field Application Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Field Application Engineer:

• Provide technical support to customers and contractors, addressing product and application-related queries.
• Perform on-site measurements and system evaluations to identify opportunities for improvement and optimization.
• Conduct technical training sessions for stakeholders.
• Assist in product quality control through thorough testing and analysis.
• Handle additional assignments as required, showcasing flexibility and adaptability.

Requirements:

• Diploma or Degree in Engineering Discipline or similar field
• Relevent experience
• Experience with Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Field Application Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Field Application Engineer:

• Provide technical support to customers and contractors, addressing product and application-related queries.
• Perform on-site measurements and system evaluations to identify opportunities for improvement and optimization.
• Conduct technical training sessions for stakeholders.
• Assist in product quality control through thorough testing and analysis.
• Handle additional assignments as required, showcasing flexibility and adaptability.

Requirements:

• Diploma or Degree in Engineering Discipline or similar field
• Relevent experience
• Experience with Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Field Application Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Field Application Engineer:

• Provide technical support to customers and contractors, addressing product and application-related queries.
• Perform on-site measurements and system evaluations to identify opportunities for improvement and optimization.
• Conduct technical training sessions for stakeholders.
• Assist in product quality control through thorough testing and analysis.
• Handle additional assignments as required, showcasing flexibility and adaptability.

Requirements:

• Diploma or Degree in Engineering Discipline or similar field
• Relevent experience
• Experience with Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Field Application Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Field Application Engineer:

• Provide technical support to customers and contractors, addressing product and application-related queries.
• Perform on-site measurements and system evaluations to identify opportunities for improvement and optimization.
• Conduct technical training sessions for stakeholders.
• Assist in product quality control through thorough testing and analysis.
• Handle additional assignments as required, showcasing flexibility and adaptability.

Requirements:

• Diploma or Degree in Engineering Discipline or similar field
• Relevent experience
• Experience with Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Field Application Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Field Application Engineer:

• Provide technical support to customers and contractors, addressing product and application-related queries.
• Perform on-site measurements and system evaluations to identify opportunities for improvement and optimization.
• Conduct technical training sessions for stakeholders.
• Assist in product quality control through thorough testing and analysis.
• Handle additional assignments as required, showcasing flexibility and adaptability.

Requirements:

• Diploma or Degree in Engineering Discipline or similar field
• Relevent experience
• Experience with Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Description

Responsibilities

• Provide customer support and build relationships with customers during field visits.
• Manage on-site installation, repairs, maintenance and diagnose errors and technical problems and finding solutions for the installed equipment.
• Produce service reports.
• To be an active team player.

Requirements

• 3 years' experience in field servicing.
• Experience preferably in the repair and servicing of refrigeration systems and compressed air related equipment.
• Being familiar with hands-on installation and removal of valve and pipe fittings is an advantage.
• Ability to troubleshoot, test repair and service equipment.
• English literacy.
• Minimum qualification professional certificate (NiTEC) / technical diploma in mechanical / electrical / mechatronic engineering.

JOB SCOPE:

• Provide technical support and solutions to customers, ensuring successful application of products.
• Collaborate with sales teams to understand customer requirements and recommend appropriate solutions.
• Conduct product demonstrations, presentations, and training sessions for customers.
• Assist in product integration and customization to meet specific customer needs.
• Troubleshoot and resolve technical issues related to product applications.
• Prepare technical documentation, including user manuals and application notes.
• Participate in product testing and validation to ensure compatibility with customer systems.
• Act as the main point of contact for technical inquiries during pre-sales and post-sales.
• Work closely with R&D and engineering teams to provide feedback on customer requirements and product improvements.
• Stay updated on industry trends and emerging technologies to provide cutting-edge solutions.

REQUIREMENTS:

• Degree/Diploma in Engineering with 1-3 years of experience.
• Knowledge of Vision/Optical Inspection systems and semiconductor manufacturing processes.
• Experience with semiconductor optical inspection equipment is a plus.
• Familiarity with programming languages (C++, C#, Python) is beneficial.
• Ability to troubleshoot electronics/PC hardware systems.
• Knowledge of statistical data analysis is a plus.
• Willingness to travel.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

JOB DUTIES

• Work in a team on scheduled projects.
• Support local and overseas project/attachment.
• Overseas project attachment and support up to 12 months.
• Report to Team Leader/Supervisor
• Install, de-install, relocation and preventive maintenance of semiconductor equipment.
• Commissioning/decommissioning of semiconductor equipment.
• Weekly Service Report update
• Monthly Progress Report assessment

EDUCATIONAL QUALIFICATIONS

Possesses Diploma or above in Engineering or a related field

CRITICAL SKILLS/KNOWLEDGE

On-the-job training by OEM for the first two months

WORKING EXPERIENCE

At least 2 or more years experience working in semiconductor industry.

PERSONALITY TRAITS

• Team worker
• Industrious
• Proactive
• Positive mindset
• Disciplined
• Physically fit

OTHER ABILITIES/APTITUDES

• Ready-to-go for overseas job attachment/support up to 12 months.
• Work at different sites depending on the project.
• Monthly online team meeting on a Saturday morning

BENEFITS/INCENTIVES

• 5 days work week
• 14 days annual leave
• Additional 1 day annual leave every 2 years with the company, up to 20 days

Transport allowance upon probation completion

1. $600 for car owners
2. $300 for other modes of transport including public transport

Job Description:

Technical Tasks:

• Performs installation & provides basic technical training when neccessary (Mainly Workplace infrastructure - WPI products: Medical Pendents & Lights / Gas Management solutions)
• Perform related upgrades / Technical Service Bulletin from factory instructions to ensure devices / equipment are up to date.

Service Operational Tasks:

• Escalate quality-related situation, market dynamics and issues from field to the Service management in his country
• Monitor and drive completion of monthly maintenance tasks and paperwork for assigned customers’ accounts

Service Commercial-related Tasks:

• Makes constant efforts for contract development and implementation of Service programs
• Any other additional duties deemed appropriate by Service Manager

Job Requirements:

• Minimum Nitec in Engineering/Electronics or Equivalent
• 2-3 years of technical experience preferable in after sales support in medical industry, or Workplace Infrastructure related sector

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

As a Field Service Engineer, you are accountable for:

• Field Support. To carry out Corrective Maintenance (CM) as a result of failure of the hardware and software related to SIMPLE. To restore the system to its operational condition. To monitor and maintain the records of the overall system operational availability and reliability, including Mean Time Between Failure (MTBF), Mean Time to Repair (MTTR), system downtime duration and the types of hardware defects as well as all related software versions, patches.

• Field Testing. To carry out software testing on the system whenever there is a new software bug fixes. To ensure the correct configuration of the system is loaded for software / system testing and before the system is used for production.

• Spares Services. To manage the spares provisioning, support and test equipment and other tools that are stored at Authority site. To undertake store keeping functions in respect of receipt, issue and disposal. To carry out serviceability check on the spares and to ensure prompt and appropriate action is taken to rectify any fault on the spares. To monitor the end-of-life and end-of-support status of the spares and installed hardware.

• Preventive Maintenance (PM). To carry out PM on the hardware to retain the system in the specified operational condition in accordance to the planned maintenance schedule. In carrying out the PM, to follow the approved PM checklists to perform calibration, servicing and verification of system configurations. To submit the PM report after each PM.

• Calibration Services. To liaise with vendor to perform calibration services on the test equipment that are used for the preventive maintenance.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

• Must be flexible to work in 12 hours shifts

• Able to cope in a highly pressured fast-paced environment

• Prior working experience in any Server / Network / Uninterruptible Power System / Security products such as Firewall, PIM and PAM and Server Virtualization will be an added advantage

• Customer orientated with high level of service attitude

• Good listening and analytical skills

• Hardworking, outgoing and enthusiastic

• Positive working attitude

• Team player, and also able to work independently and with little supervision

• Able to thrive in a dynamic environment

• Able to understand the system and architecture diagrams

• Able to understand the user operation environment

• Willingness to pick up new technologies

• Perform other job responsibilities as and when assigned

Education

Diploma / Bachelor’s Degree in IT/Engineering discipline

CCNA certified

Experience

Minimally 1-2 years of experience in supporting network, security, server and UPS

Minimally 1-2 years of experience in supporting mission critical systems with a stringent SLA of 99.9%

Well-versed in IT Service Management (ITSM) standards, processes, guidelines and best practices will be an added advantage

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Electrical Engineer/Field Service Engineer (Marine/Electrical)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 8 am – 5.30 pm (One Saturday per month, 8 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Carry out testing and commissioning related to marine propulsion systems, power generation systems (Marine and Land), deck machinery, etc.
• Conduct hands-on fault diagnosis, troubleshooting, and maintenance of marine systems/components in workshops and on-board vessels.
• Perform hands-on work in mechanical repairs, installation, and removals.
• Provide support to the project team on the implementation of new projects.
• Provide technical support to customers.

APPLY NOW!!!

• Minimum 2 years of related experience.
• Minimum Higher Nitec in Electrical Engineering, preferably Major in Power.
• Proficient in Microsoft Office.
• Candidates with experience in Electrical Control Systems are preferred.
• Comfortable with traveling (Anchorage/Local/Overseas) on short notice and at odd hours.
• Comfortable with working outdoors and onboard.
• Inexperienced candidates are welcome to apply, as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65623 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114