RESPONSIBILITIES

• Be part of the site team to perform engineering design, project management and oversee drawing management, and control of technical documentation;
• Good knowledge of Singapore Building Regulations and codes, design development & detailing;
• To assist Project Manager for site planning, coordination, supervision, monitoring and inspections
• To ensure site activities are executed in full compliance with technical specification and approved drawings within project budget and schedule;
• To liaise with authorities, consultants and subcontractors for technical submittal and approval;
• To adhere to construction procedures and safe work practices;
• To ensure efficient control and use of manpower, equipment and materials onsite without wastage;
• Others ad-hoc related duties as assigned.

Requirements:

• Possess a Bachelor Degree in Civil Engineering duly recognised by Professional Engineer Board of Singapore and accepted universities within the BCA listing.
• At least 3 years in relevant working experience in local construction industry;
• Self-motivated, independent and good interpersonal & communication skills

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

• Take instruction from/assist reporting to superior.
• Produce sketch drawings.
• Set design criteria , check design calculation and drawings.
• Assist in technical proposals.
• Check documentation complies with design criteria/Client brief/Approved concept/Standard.
• Liaise/attend clients, architects and site meetings.
• Maintain and check for completeness record, etc.
• Resolve any technical problems faced during the project design and/or construction stages.
• Other ad-hoc assigned by Director.
• At least 5 years of working experience in the construction industry.
• Candidate must possess a least bachelor's degree/post graduate diplima/professional degree in Engineering Mechanical or equvalent.
• Relevant project experience in HVAC/ACMV/MEP system both in design and project management.
• Strong knowledge of M&E installation, current practices, code and authorities requirement.
• Knowledge in ACMV product R&D preferred.
• Knowledge in Auto Cad and BIM preferred.

Key Accountabilities:

• Undertake independently the commissioning, installation, maintenance and repair/overhaul of MTU products and its associated equipment at MTU workshop or at site in accordance with MTU manuals and/or specific given instructions.
• Capable in resolving the technical matters and completing the services according to the works order and to the acceptance of the Customers and Supervisors, thereafter, provide the service/investigation reports where applicable.
• Liaise with Supervisors and in-house Technical Specialist for technical assistance, if required.
• Develop and update own skills and knowledge to meet the job requirements through training and self - learning.
• Advise, instruct and train the team members in carrying out the assigned tasks, in using of MTU documentations, tools, customers' drawings, etc.
• Observe the safety regulations of WSHA and guidelines/risk assessment from the company's WHS Committee when performing work at-site or at customer's premises.
• Work assigned from time to time

Qualifications:

• Diploma in Mechanical or Electrical Engineering
• Preferably with working experience on diesel engine.
• Good communication and interpersonal skill, resourceful, team player
• Willing to travel overseas on job assignments

Job Description

• Attend site meetings with consultants.
• Study M&E drawings and coordinate M&E works with the consultants and sub-contractors.
• To resolve any technical or site issues.
• Ensure M&E works are carried out according to specifications and drawings.
• Report to Project Director or Project Manager on any technical or site problems relating to M&E works.
• Coordination of sub-contractor's M&E work and ensuring the work is on schedule.

Job Requirement

• Degree in Mechanical Engineering or equivalent.
• Minimum 5 years of practical working experience in local building construction industry (Preferably in HDB Projects).
• Independent, positive attitude, self-motivated and responsible.
• Good communication and interpersonal skills.

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field
• 5+ years of experience in instrumentation and control system design, analysis, and implementation
• Proficiency in using CAD software for control system design
• Experience with control system programming and software tools such as PLC programming, DCS programming, or SCADA systems
• Knowledge of codes, standards, and regulations related to instrumentation and control systems, such as ISA, IEC, and NEC
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Experience with industrial processes and equipment, such as pumps, motors, and valves, is a plus
• Professional Engineering (PE) license is preferred

• Instrumentation and control systems for industrial processes should be designed, developed, and tested.
• Choose and specify instrumentation parts, such as controllers, transmitters, and sensors.
• Using CAD software, create schematics, diagrams, and layouts for control systems.
• Using software tools like PLC programming, DCS programming, or SCADA systems, develop and put into practice control plans.
• For planned initiatives, carry out cost-benefit evaluations and feasibility studies.
• Ensure that projects are finished on schedule and under budget by working together with project managers, other engineers, and clients.
• Review and approve instrumentation and control system design documents, including specifications, drawings, and calculations.
• Prepare and present technical reports and presentations to clients and other stakeholders.
• Ensure that instrumentation and control systems are designed and installed in compliance with applicable codes, standards, and regulations.
• Provide technical guidance and support to other team members.
• Keep abreast on new developments in the field of instrumentation and control systems as well as market trends.

About Seagate Technology:

Seagate is the leader of mass data storage solution that helps the world store more data and harness its potential with breakthrough cloud storage services, systems, hard drives, solid state drives and many more.

About our group:

Equipment Development Engineering group, EDE in short, is an automated equipment development team that design and develop high precision automated machines that incorporate vision guidance capabilities and inspection. Our vision is to deliver intelligent automated manufacturing equipment solutions to factories through continuous innovation and challenging the impossible mindset. We strive to include IOT, AI, machine learning, data harvesting and data analytics solutions in our development roadmap with the goal of realizing smart manufacturing plant in the near future.

EDE has managed to win a wide spectrum of innovation awards and patents on international and internal corporate scene through best-in-class design. Our team consists of aspiring individuals who specialize in mechanical, embedded system, electrical, software, vision, or multiple disciplines and the good news is we are expanding! We are seeking awesome control engineer to join and thrive in our family. We embrace motivated individual who is a team player and able to work independently. When you join Seagate, you become a vital part of our mission to help safeguard humanity’s prized data. You will learn and help us develop new technologies as part of this quest. Your professional growth is our priority.

About the role:

• Develop control software for precision and high-throughput automated equipment.
• Develop electrical design for automated machine with the assistance of draftsman in creating schematic drawings and BOM creation.
• Collaborate with cross-functional teams to gather requirements, design system architectures, and implement software solutions.
• Implement best practices for software development, including code reviews, testing, and documentation.
• Support and troubleshoot existing automation systems, identifying and resolving technical issues in a timely manner.
• Stay updated on industry trends and emerging technologies to drive innovation and continuous improvement in automation software solutions.
• Perform continuous improvement and enhancement to the existing equipment software toward Smart Autonomous Manufacturing.

About you:

• Self-motivated and eagerness to learn more.
• A positive mindset with a can-do attitude to challenge the impossible.
• A good team player with the ability to work independently.
• Good organizational and time management skills.
• Able to work remotely in an effective manner.
• Might need to travel.

Your Qualification:

• Bachelor’s or Master’s Degree in Electrical and Electronics Engineering, Computer Engineering, or other equivalent disciplines.

Your experience includes:

• VB6, C# and/or C++ OOP and multi-threading PC based software programming.
• Experience in electrical design for machine automation in Class100 cleanroom environment will be very much preferred though not compulsory.
• Knowledge and/or experience in machine vision technology, AI technology, SolidWorks 3D or control automation will be an added advantage.

We are seeking an exceptionally skilled and detail-oriented NDT

Systems Engineer to join our team. This role demands extensive

expertise in advanced NDT methods, system design, programmin

and hands-on testing. The ideal candidate will have a proven trac

record in operating and programming advanced NDT equipment,

including PAUT, ToFD, DRT, ECT, and ACFM, and will possess

advanced skills in software and mechanical design.

1. Advanced NDT Equipment Handling:

Phased Array Ultrasonic Testing (PAUT): Operate PAU

systems, including setting up and calibrating equipment

configuring probe arrays, and conducting complex

inspections on various materials.

Direct Radiography Testing (DRT): Execute DRT

procedures, including optimizing exposure parameters,

interpreting radiographic images, and ensuring complia

with safety and quality standards.

Eddy Current Testing (ECT): Perform ECT for detecting

surface and near-surface flaws, including setting up test

parameters and analyzing signals.

Alternating Current Field Measurement (ACFM): Utili

ACFM to detect and size surface-breaking defects, includ

setting up equipment and interpreting measurement da

2. System Design and Programming:

Automatic Immersion Systems: Design, program, and

implement automated immersion systems for ultrasoni

testing. This includes developing custom software soluti

and integrating with hardware components.

Software Simulation: Use CIVA software to simulate an

model NDT scenarios, optimizing test setups and predic

inspection outcomes.

Equipment Programming: Develop and troubleshoot

custom programming for ultrasonic testing equipment,

including creating scripts for specific test procedures an

automating test sequences.

3.Technical Skills:

CIVA Software:

Advanced knowledge of CIVA software fNDT simulation and modeling.

SolidWorks and AutoCAD:

Proficient in SolidWorks formechanical design and AutoCAD for technical drawing.

Programming Skills:

Experienced in programmingultrasonic testing equipment, including creating customscripts and automation solutions.

4.Personal Qualities:

Initiative and Hardworking:

Self-driven with a strong wethic, capable of working independently and managing pressures.

Analytical Skills:

Excellent analytical and problem-solviabilities, with a keen eye for detail and precision.

5.Consulting and Solutions:

Offer expert consulting services to addresscomplex NDT challenges, providing tailored solutions baon client requirements and industry standards.

Problem Solving:

Analyze and resolve technical issuesrelated to NDT processes, equipment, and systemintegration.

6.Travel Requirements:

Regional Travel:

Travel to various international locationincluding the Middle East (Saudi Arabia, UAE, Oman, Qaand Asia (Singapore, Malaysia, Indonesia, Thailand,Bangladesh, India) for project assignments.

Adaptability:

Adapt to diverse working environments,including offshore and onshore sites, and handle projecdemands with flexibility.

Application Instructions:

Interested candidates should submit a detailed resume outlitheir qualifications, experience, and relevant certifications.

Please include a cover letter addressing how your skills andexperiences align with the responsibilities and requirementsoutlined above.

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Summary of the Job:

· Responsible for mechanical design tasks of given project and ensure delivery of the machine according to customer requirements.

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 2 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Responsibilities:

• Arranges necessary facilities and instruments for jobs such as meters, test kits, temporary preparations, shore generators, and load banks
• Performs testing and commissioning activities and ensures that proper documentations are approved and signed
• Supervises and deploys manpower to execute the operational tasks
• Ensures that electrical equipment and switchboards meet the purchase specifications, and arranges for protection and maintenance of the electrical system
• Reviews commissioning work processes to enhance efficiency and productivity
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department and vendors
• Plans and schedules the testing and commissioning requirements based on project basis, and organises all logistics requirements for major operations
• Performs any other assigned duties and responsibilities

Requirement

• Diploma in Electrical Engineering or related Engineering Disciplines
• Min. 4 years of related work experience working on FPSOs
• Possess working experience related to testing of LV/ MV Switchboards, power generators, DCS / ICSS interface for PMS system
• Capable of testing and calibration of Electrical switchboard and its components, troubleshooting and clear understanding of system specification and class requirements
• Familiar with the testing procedures and applicable rules and regulations of regulatory bodies
• Familiar with test memos and manuals

Our Addresses:

Seatrium - Admiralty Yard

Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Seatrium Limited - Tuas Yard

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Our Working Hours:

Mon - Thu: 8:00 am - 5:15 pm

Fri: 8:00 am - 4:30 pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

OB DESCRIPTION

Job Title

Quality & HSE Engineer

Occupation

QUALITY CONTROL ENGINEER

Job Description & Requirements

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Purpose:

Responsible for performing the final inspection of assembly products to meet Customer's quality standards.

Key Area of Responsibilities:

· Perform In-process and Final Inspection for assembly tools and loose assembly modules to meet the requirement as defined on drawing, WI and any related documents.

· Initiate Material Review Board (MRB) review when part or assembly is not according to requirement as defined on drawing, WI and any related documents during in-process inspection.

· Update outgoing inspection record after Final Inspection to allow monitoring of the internal quality.

· Raise Non-Conformance Report (NCR) for non-conformance found to ensure reject is recorded.

· Support and participate in company continuous improvement program.

Qualification & Experiences:

· Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course

· Preferably with Workplace safety & health in Metal work certification

· Knowledge on quality inspection and buyoff

· No experience are welcome

Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

C&S Resident Engineer

Institution Project

Job Description:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• Report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timely completion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must have the strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements especially to comply with CA's criteria for buildability and safety assurance system.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Manage the site supervisors with respect to C&S engineering works, architectural and M&E engineering works.
• Implement and sustain the site supervision quality & safety assurance system
• Ensure that proper site documentation for on-going works, site meetings, safety records, method statements, shopdrawings, as built submissions, etc are well managed.
• To attend site progress, technical, client-consultant, variation and coordination meetings
• Interpret drawings and contract documents on works to be carried
• Any other task assigned from time to time.
• Estimated commencement of work in January 2025.

Job Requirement:

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore
• Accredited with IES/ACES with a valid Resident Engineer Practicing Certificate
• Minimum 8 years C&S work experience with strong knowledge in construction of building structures.
• Knowledge in BIM and VDC capabilities will have an added advantage
• A good team player with effective communication skills and able to interact with people at all levels.
• Preferably with experiences in Institution projects.
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements
• Good supervisory and leadership skills, with experience in leading a team of Resident Technical Officers

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

As a Technical Sales Engineer, you will be the technical expert on SESTO Robotics' products, helping customers, partners, and integrators effectively integrate our Autonomous Mobile Robots (AMRs) into their specific applications.

Working closely with the engineering teams, your role will involve addressing customer challenges by offering tailored solutions that showcase the value of our products. You'll guide customers through the adoption process, ensuring seamless integration while providing technical know-how and driving successful implementations.

Specific Responsibilities:

1. Identify and Qualify Sales Opportunities:

- Actively identify and qualify new leads through market research, networking, and outreach activities.

- Assess customer automation needs and pain points to propose suitable Autonomous Mobile Robot (AMR) solutions, including payload and application-specific requirements.

2. Sales Strategy and Pipeline Management:

- Manage and monitor the sales pipeline, forecast revenue, and track performance against targets using CRM tools.

- Collaborate with cross-functional teams like Engineering, Marketing, and Customer Success to drive sales efforts and ensure alignment with customer needs.

3. Technical Proposal Development and Documentation:

- Create technical proposals, cost estimates, commercial offers, and tender documentation in consultation with internal technical teams.

- Address technical and commercial queries from customers to ensure clear understanding of proposed solutions.

4. Proposal Presentation and Negotiation:

- Prepare, present, and negotiate proposals, quotes, and contracts, ensuring all payload and application requirements are met.

- Negotiate terms and conditions with customers to ensure alignment with company policies while securing favorable agreements.

- Handle objections and challenges to close deals effectively.

5. Customer Relationship Management:

- Build and maintain strong relationships with key decision-makers and stakeholders in target accounts.

- Conduct meetings, presentations, and product demonstrations to highlight the benefits and value of AMR solutions.

- Serve as the main point of contact for customers, providing post-sales assistance as needed.

6. Collaboration with Technical Teams:

- Work closely with technical experts to develop tailored solutions and presentations that meet customer requirements.

- Utilize technical insights to strengthen the value proposition and enhance the competitive edge of AMR solutions.

Requirements:

• Ability to read mechanical drawings
• Ability to read basic electrical schematics
• Basic programming skills preferrably in Python or C/C++
• Excellent reporting writing and communication skills

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Assist the Project Manager with daily project activities, including coordination, scheduling, planning, and implementation of work.
• Conduct regular site inspections to ensure construction activities are carried out in compliance with approved designs, contract specifications, safety standards, and quality requirements.
• Provide recommendations for corrective actions when deviations from the project scope, schedule, or quality occur.
• Serve as the point of contact for clients, consultants, authorities, and internal teams, ensuring effective communication of project progress, specifications, and any challenges.
• Review project proposals and plans to align project objectives with management expectations, ensuring performance criteria and client needs are clearly understood and incorporated.
• Oversee project timelines and milestones, proposing adjustments and modifications to the schedule as needed to ensure timely delivery.
• Assist in the achievement of team goals by actively contributing to relevant tasks and maintaining a collaborative work environment.
• Liaise with clients to coordinate project plans, schedules, and deliverables, ensuring alignment with client expectations and project requirements.
• Prepare and submit all necessary documentation, including method statements, risk assessments, progress reports, monthly reports, and other key project documents.
• Prepare and submit monthly progress claims in a timely manner, ensuring accuracy and completeness.
• Perform other duties or tasks as assigned by immediate superior or Head of Department.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially cable pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

• 6 days work week
• Preferably possess a valid Class 3 license

Other Benefits

• Enjoy a company-provided shuttle for easy transportation to and from the office, including lunch trips.
• Free access to medical teleconsultation services for your convenience.
• Portable Medical Benefits Scheme (PMBS). Enjoy an additional monthly contribution directly to your Medisave account.
• Comprehensive Medical Benefits. Includes coverage for dental care and health screening through the company's provider.

Why Join Us

• Dynamic Work Environment: Thrive in a fast-paced, ever-evolving workplace that offers new challenges and opportunities every day.
• Varied Responsibilities: Take on diverse and exciting tasks that keep your role engaging and fresh.
• Collaborative Team Culture: Join a team that values open communication, efficiency, and a strong commitment to security.
• Growth and Development: Benefit from a supportive environment with ample opportunities for professional growth, skill development, and career advancement.

• Basic up to $3500 + AWS + VB
• 5 days work per week
• Monday – Friday , 8.30am – 6pm

Responsibilities:

• Understand customer requirements and develop tailored technical solutions.
• Support the Sales team in developing, marketing, solutioning, and deploying smart IoT solutions, integrating both software and hardware components for trials.
• Assist customers throughout the development cycle, from design specification to final acceptance.
• Collaborate with cross-functional teams to ensure a seamless handover to the project team for system installation, commissioning, and configuration.
• Monitor presales progress, identify potential challenges, and implement solutions to ensure project success.
• Coordinate and communicate with software developers, hardware engineers, and site operations to align efforts.
• Conduct site monitoring to verify that systems perform optimally and meet project specifications.
• Assist with IT system configurations, including networking and communication protocols.
• Provide ongoing technical support and troubleshooting during and after deployment.
• Training will be provided for candidates who possess relevant certifications (eg: electronics) but lack work experience

Requirement

• 2+ years of experience in a Presales Technical role or similar position have the advantage
• Knowledge in BMS & ELV Systems e.g. PA system, Fire Alarm System, CCTV system, Card Access, Structure Cabling & etc
• Knowledge of both software project lifecycle and DevOps practices
• Experience with a mix of software and hardware deployments
• Familiarity with IT systems, including networking and system monitoring
• Strong problem-solving skills with the ability to manage multiple presales activities
• Excellent communication skills and the ability to work collaboratively with diverse teams
• Experience in Video Manager software in comp's products: CCTV
• Able work independently and also with other both indoor and outdoor locations
• Co-ordinate and work closely with the external parties and customers to plan, organize and execute the project related activities.
• Assist the manager in engineering works such as system designing, documentation, testing & commissioning (T&C) for BMS systems
• Experience in IoT, smart building systems, or ELV (extra-low voltage) technology
• Familiarity with site operations, safety protocols, and field troubleshooting
• Experience in project monitoring tools and automation is a plus.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation).
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID, Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.

Requirements:

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above.
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities:

• Preventive and corrective maintenance for DRUPS (Dynamic Rotating UPS) at customers sites.
• Perform schedule preventive maintenance program at various customers’ sites.
• Attend trouble shooting and corrective repair on site
• Identify issues and potential issues from PM activities, provide feedback and possible solution to back office for issue resolution discussion with customers.
• Generate and maintain lean and clear documentation like service report from every service activity.
• Others maybe be needed for customer services.

Requirements:

• Diploma or Degree and above with M&E Engineering background.
• 2-3 years Relevant M&E engineering service or project management experience.
• Good knowledge on electrical system, mechanical, electrical rotating machine functionality, and service methodologies.
• Ability to handle high reliability service demand with technical solution.