Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review Architectural drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Degree in Civil/Structural Engineering.
• Minimum 5 years Site/Working Experience.
• Good Organizational and planning skill.
• Able to work independently and as a team.
• Candidates with Marine Project experience preferred.

Requirement:

• Strong technical aptitude and the ability to understand and explain complex products and solutions
• Excellent communication and interpersonal skills, with the ability to build and maintain relationships with customers
• Problem-solving skills and the ability to think creatively to overcome challenges
• Strong negotiation and presentation skills
• Proficiency in Microsoft Office Suite and customer relationship management (CRM) tools
• Willingness to travel within the region as needed

Job Description:

• Proactively identify and pursue new sales opportunities within your assigned territory
• Develop and execute targeted sales strategies to meet and exceed sales targets
• Provide technical expertise and support to customers, ensuring their needs are met
• Collaborate with cross-functional teams to deliver seamless customer experiences
• Continuously monitor market trends and competitor activities to identify new avenues for growth
• Maintain accurate records of all customer interactions and sales activities
• Represent the company at trade shows, conferences, and other industry events

Job Scope:

• Build something cool from scratch to final products & system
• Understand business needs, technical requirements and give innovative solutions
• Work smart instead of hard to solve all kind of funny issues
• Relax and think out of the box to create something innovative to make someone happy include yourself and who you really care
• Study latest technology in electronics, software, data analysis, AI etc.
• Identify prospective customers by using business directories, following leads from existing clients, participating in organizations and events, and attending trade shows and conferences.
• Initiate sales campaigns and follow marketing plan guidelines in order to meet sales and production expectations.
• Select the correct products and solutions or assist customers in making product selections, based on customers' needs, product specifications, and prepare quote prices, credit terms, or other bid specifications for customer
• Demonstrate and explain the operation and use of products and systems.
• Complete product and development training as required.
• Visit establishments to evaluate needs or to promote product or service sales.
• Prepare sales contracts for orders obtained, and submit orders for processing.
• Project coordination for project development, deployment,testing.

Requirement:

• Prefer Bachelor or Master Degree in Engineering (Electronics/Computing/Software) or equivalent.
• Prefer 5 Years or above experience in embedded system design, electronics hardware and software development or sales and marketing
• Candidate must have good understanding about electronics system, architecture and be able to understand clearly the hardware or software with less guidance. Knowledge with related developments tools and programming language like C, Python is basic requirement
• Candidate must be active and quick learner, and fearless of new things
• Candidates fluent in both English and Mandarin will be preferred, as they will be required to liaise with our R&D team in Shanghai & Fuzhou, China.
• Prefer ambitious, mature & good communicator

Inspection Engineer (Tankage)

Job Description:

Inspection on various tanks such as basic repair and maintenance.

Performed regular inspections to ensure Quality Assurance on the various installed materials in the facility.

Manage the inspection process regularly by determining the corrosion rate.

Perform internal/external inspections on storage tanks and to generate reports with repair recommendations.

Monitor the tank inspections on regular intervals.

Performed various quality assurance procedures on the tanks.

Maintain records of all inspection process carried in both hard copies as well as electronic copy.

Perform inspection asper various quality assurance procedures on the tank’s asper client criteria.

Perform internal and external inspections to determine if it meets the acceptance criteria of a specific code, standard or document.

Properly interpret regulations, codes, and industry standards.

Computer usage to compile and submit daily reports, inspection reports, and inter-office communications.

Pay attention to detail and be capable of recommending and approving repairs as well as performing visual inspection of completed work.

Maintains a positive relationship between client, facility, and customer; and promote a positive attitude towards co-workers.

Compile and submit completed inspection reports in a timely manner.

Inspection of various storage tanks in accordance with API inspection codes and Recommended practices asper API- 620, 650 and 653.

To provide technical expertise on all NDT matters as required on projects.

Qualifications:

Degree in any related engineering/science field from a recognized university

Candidates with a Diploma in Mechanical Engineering, preferably with more than 15 years of experience in the petrochemical industry working in fixed equipment or inspection related areas

Knowledge of materials selection, Non-Destructive Examination techniques, welding, and risk-based inspection procedures, would be an advantage

Familiarity with major API codes and specially API 650 for tankage will be an added advantage

Knowledge and ability to use computer programs such as MS Office, etc.

Willingness to work extended hours, not afraid of heights and working in confined spaces

A team player with strong communication and interpersonal skills

Capable of effectively driving milestone planning for Equipment Strategy development with key members from various functions

Candidates having work experience with ExxonMobil will be prioritized.

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Overseeing projects at one or multiple stipulated sites.

• Assist project manager is the execution of the projects.

• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.

• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.

• Monitor and ensure progress of works are carried out according to project specification.

• Assist drafting team for design schematic drawing, layout drawing, P&ID drawing.

• Review and check drawing before submit to main contractor.

• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.

• Support project manager in the administration of contract, claim, variation and any dispute arise.

• Raise MR and order material & arrange manpower for necessary works.

• Advise site team for work schedule and technical issues.

• Make sure project is carried out according to schedule.

• Responsible for site supervision and implementation.

• Responsible for ensuring implementing safety measures.

Requirements:

- Minimum diploma

- 3 years or above experiences in ACMV, especially in air-conditioning industry

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Prepares and reviews key project documentation in executing the complete Subsea/Riser interface engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares and reviews project requirement specification, layout and interface drawings, design studies and other engineering deliverables using engineering common network, software and tools
• Coordinates with other engineering team members (i.e. Yard engineering, basic design and etc.), Equipment designers and Client’s SURF contractors on technical issues and design solutions in meeting project deliverables
• Participates in project meeting, attends to basic technical queries and issues related to subsea/riser interfaces, reviews and be responsible for Riser interface equipment designer deliverables
• Liaises with owners, Equipment designers, SURF contractors, , statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates and reviews the reports on work progress for submission to owners, statutory and classification authorities for approval and maintains project database for future references
• Preparation of technical specification (TS) for complex riser related packages.
• Technical bid evaluation (TBE) of vendor proposals to aid selection of most suitable proposal for the project.
• Reviews Vendor deliverables
• Manages & Liaises with the selected vendor to deliver the package meeting all the project requirements in a safe and cost-effective manner meeting the schedule.
• Provides engineering inputs to commercial, production and project team members on all aspects to procurement, fabrication, installation, testing and commissioning activities

Requirements

• Bachelor's Degree in Mechanical/ Offshore and Marine Engineering or equivalent
• 5 years of experience in Procurement, Planning, Designing, Integration of Subsea/Riser interface design in the oil & gas industry
• Experienced in engineering pre-commissioning and commissioning activities in package
• Possesses good interpersonal skills
• Good problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

As a Facilities Mechanical Engineer, you will be leading engineering and maintenance works in the fields of Mechanical equipment and system on site, to achieve continual improvement to system robustness, reliability and efficiency with the necessary guidance and direction from Facilities organization, to achieve facilities department, site, facilities corporate and company goals.

Job Responsibilities

• Plan and implement preventive and corrective maintenance programs for Facilities mechanical systems including HVAC, exhaust systems, scrubbers, process cooling water, chillers, boilers, cooling towers, compressed air systems, Fire protection system and cleanroom air systems to ensure maximum equipment uptime and reliability.
• Plan, design and lead mechanical system expansion projects to facilitate tool utilities demand of future technology of manufacturing equipment.
• Plan, design and lead mechanical engineering projects includes new construction, system upgrading and quality improvement.
• Respond and problem solving of system issues and production interruptions to mechanical related systems.
• Perform capacity tracking and planning for mechanical systems.
• Enforce to company’s environmental safety health policy and procedure, standard operating procedure with risk assessment, good housekeeping standard and quality policy when performing work.
• Apply computer base software to document and analyses records of maintenance work order, equipment history and project tracking.
• Maintain maintenance record for system fault history traceability.
• Proficient in quality tool such as 8D & 5 WHY analysis for troubleshooting or incidents.
• Initiate and lead energy savings & sustainability projects.

Job Requirements

• Bachelor’s degree in Mechanical engineering.
• Design and Engineering background of mechanical system such as HVAC system and Exhaust system will be of good advantage.
• Ability to understand and use schematic, single-line drawing and related equipment and system documentation.
• Ability to work in a team environment with various professional level.
• Considerable knowledge and application of problem solving and data analysis methodology.
• Considerable knowledge of maintenance practices and procedure and installation work.

Position Overview:

We are seeking a motivated and detail-oriented Semiconductor Engineer to join our Tool Installation team. This position is ideal for recent graduates with a strong foundation in semiconductor technology, electrical engineering, or mechanical engineering. You will be responsible for installing, maintaining, and troubleshooting semiconductor tools used in the production of advanced semiconductor devices.

Key Responsibilities:

• Tool Installation & Commissioning: Support the installation and setup of semiconductor manufacturing tools and equipment, ensuring they meet operational standards and specifications.
• Technical Support: Provide troubleshooting and technical support for tool-related issues, collaborating with cross-functional teams to resolve problems efficiently.
• Maintenance & Calibration: Assist in the regular maintenance and calibration of tools, ensuring they operate at optimal performance levels.
• Documentation: Maintain detailed records of installations, modifications, maintenance, and performance data for tools and equipment.

Required Qualifications:

• Education: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Semiconductor Technology, or a related field.
• Certification: Must have an Engineer certification (e.g., EIT or equivalent).
• Technical Skills: Familiarity with semiconductor fabrication processes and tools is a plus. Strong knowledge of electrical circuits, mechanical systems, and troubleshooting techniques.
• Problem Solving: Ability to diagnose and resolve technical issues effectively and efficiently.
• Communication: Strong written and verbal communication skills. Ability to document work processes clearly and collaborate effectively with team members.
• Team Player: Ability to work in a team environment and follow detailed instructions while taking initiative when needed.
• Attention to Detail: A keen eye for detail, ensuring that installations and processes are carried out according to established protocols and safety guidelines.

Preferred Qualifications:

• Internship or project experience related to semiconductor tool installation or maintenance is a plus.
• Familiarity with cleanroom environments and semiconductor manufacturing equipment is desirable but not required.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

• 5 Days work week
• 9am to 6pm
• Walking Distance from MRT

Responsibilities:

• Oversee drawing management and control of technical documentation
• Assist project manager in planning and execution of project plans at site
• To understand and design electrical drawing and single line drawings
• Carrying out tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementing preventative maintenance procedures
• Preparing service & Site Progress Reports

Requirements:

• Diploma in Engineering or equivalent
• Min 2 years of working experience in construction industry
• Knowledge in PLC and WSH

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1222284 | Kelvin Soh

• He/She is required to prospect for new accounts, maintain existing accounts, and build relationships with newly acquired customers.
• Service corporate accounts and manage full sales cycles
• You are required to apply appropriate strategies to increase sales.
• Keep updated on market competition and prices
• Attend site meetings and responsible to liaise with our customers on their solution needs and after sales need.
• Follow up and process sales orders, sales report generation, project management and sales presentations.
• Corresponding with customers on quotations and purchase order related issues.
• Manage daily sales inquiries and quotations via email and phone for both existing and new clients.
• Work closely & coordinate with the indoor team to maximize sales figures.
• Liaise with operation team and ensure timely delivery of customers’ orders
• To prepare report after Job Done / Pump Repair Done. (Training will be provided)
• Carry out risk assessment; Make recommendations on risk control measures and Communication Risk Assessments (RA) to concerned parties and other Method of Statement. (Training will be provided)
• Any other ad hoc duties assigned

Requirements:

• A degree or diploma holder preferably in Mechanical Engineering or a related field.
• Applicants with no working experience are welcomed (Training provided)
• Strong knowledge of pumps and their applications is highly desirable
• Experience in engineering sales/customer service is a plus.
• Proficiency in AutoCAD, Excel, and PowerPoint
• Willingness to travel for business purposes as required
• Excellent communication and interpersonal skills.
• Willing to learn, pleasant personality, humble responsible, positive working attitude and hardworking.
• Ability to work independently and as part of a team.
• Proficiency in Mandarin to liaise with Mandarin-speaking clients and suppliers.
• Salary base on the working experience, additionally + Commission
• Flexible and able to Support on Saturday if required.
• Class 3 driving license with own vehicle.

ATTRACTIVE REMUNERATION PACKAGES WILL BE OFFERED TO THE RIGHT CANDICATE

Kindly send us your updated resume indicating your current and expected salary to: [email protected]

We regret that only shortlisted candidate will be notified.

Visit us at: https://www.acms.com.sg

Job summary

Attractive salary package

Learning & Development opportunity

Positive Working Environment Commission

• Assist in the planning and scheduling of construction activities.
• Coordinate with architects, subcontractors, and suppliers to ensure project specifications are met.
• Conduct site inspections to ensure compliance with safety and quality standards.
• Supervise and manage on-site construction activities.
• Monitor project progress and provide regular updates to the project manager.
• Ensure all materials and workmanship meet the required standards and specifications.
• Implement and enforce health and safety protocols on the construction site.
• Conduct safety audits and inspections to ensure a safe working environment.
• Prepare and submit reports on project status, costs, and any issues or delays.
• Liaise with clients, architects, engineers, and other stakeholders to ensure smooth project execution.
• Attend project meetings and provide updates on construction progress and challenges.

Requirements

• Required language(s): Chinese, English (in order to liaise with the English & Chinese speaking associates)
• Graduate with no experience welcome.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Good team player and problem solver.

Job Responsibilities

• Provide effective and timely services and support all existing scheduled projects
• Provide sales support on technical specification & information, data, drawings
• Project quotation specification confirmation and technical clarification
• Design accessories and create 3DCAD drawings for quotations and assemblies
• Provide consultation and offer workable solutions to help solve customers’ concerns
• Do on-site technical assessment and provide engineering solutions
• Presentation and training to internal and customers
• Ensures quality by completing all final inspections and repair reports

Requirements

• Degree/Diploma in Mechanical / Instrumentation / Mechatronics Engineering or equivalent
• Ability to operate 3DCAD (Solid Works)
• Good knowledge onl valves and instrumentation is preferred.
• Related experience in process & control or instrumentation service industry is preferred.
• Decisive, drive and ability to deliver effective, innovative solutions
• Good knowledge of Microsoft excel, word and powerpoint
• Be able to work long term with us
• English fluency (meeting and writing reports inside and outside the company)
• A person who has positive and can think and act for himself/herself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication and interpersonal skills at all levels.

Reporting Function

• Directly report to Engineering Manager/General Manager

RESPONSIBILITIES & DUTIES

• Assist the Production Manager in the scheduling of all incoming jobs and ensure close monitoring and timely delivery.
• Assist the Production Manager in taking charge of all coating (HVOF and Armoloy) jobs and ensure delegation and coordination on the necessary works.
• Understand the full requirements of all manufacturing, servicing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Ensure all budgets and plans are met.
• Assist the Production Manager to monitor and manage workshop loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans.
• Attend weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager to work closely with all Production Supervisors to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Identify the skill level of each reporting employees and distribute suitable work tasks to achieve higher throughput.
• Manage and resolve grievances and conflicts arising. Motivate employees to boost their morale.
• Work with Production Manager, Engineering Manager, General Manager and HR department to develop, implement and conduct training to enhance the competency or upgrading of skills for production employees.
• Conduct annual performance appraisal for all reporting employees.
• Work closely with the QHSE Manager/ MR to resolve quality issues.
• Perform review on PCR and work closely with the sales, engineering and quality department or customer to clarify all technical specifications and job requirements.
• Assist the Production Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager in initiating purchase requisition for any requirements.
• Assist the Production Manager in preparing monthly reports whenever required.
• Work closely with all departments to resolve any arising issues.
• Assist the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Accountability

• Control, lead, develop and motivate all reports.
• Monitor and ensure on time delivery of finished product.
• Minimize rework and rejection rate.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.
• Report all unsafe acts, infrastructure and environment to his Manager.

QUALIFICATION & EXPERIENCE

· Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.

· Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

RESPONSIBILITIES & DUTIES

§ Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.

§ Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.

§ Generate PCR and manufacturing process plan.

§ Generate engineering drawings and perform drafting.

§ Support Asst. Engineering Manager on the job costing.

§ Continuously explore for new manufacturing method or new external providers to support the production.

§ Work closely with the Production Supervisor to resolve any production issue.

§ Support the procurement department to deal with external providers on all technical issues.

§ Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.

§ Follow safe work practices and procedures.

§ Ensure company and QHSE policies and procedures are adhered to at all times.

§ Participate/ attend all functions, activities and meeting organized by the company.

§ Perform other assignment and duties as and when required.

§ Welcome Fresh Gradutes

• Site & office project management and daily operations including inspections, handover, site measurements, project management
• Handling technical and engineering issues
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Liaison and meeting with client's representatives, relevant authorities and consultants
• Site co-ordination, monitoring and report work progress
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of projects
• Conduct site check on the repair works, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions

Job Requirement:

• At least Diploma, Advanced Diploma, Bachelor’s Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent
• 0 - 2 Year(s) of experience in sales of products & services, preferably in Engineering Industry
• Good communication skills and networking skills
• Self-drive & motivated individual
• Salary will be paid based on experiences and qualifications