• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• 2 years of experience advantageous in supervising geotechnical and deep excavation works and diaphragm wall construction
• Degree in Civil Engineering
• Accredited as a RE with IES

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• 2 years of experience advantageous in pedastrian overhead bridge, road, flyover construction
• Degree in Civil Engineering
• Accredited as a RE with IES

Responsibilities:

• Prepares the schedule and oversee the T&I activities as per project specifications and procedures.
• Manages the subordinates’ staff in the day-to-day activities and that project goals are met as per budget.
• Coordinates with several departments related to T&I of project.
• Supervises the performance of his team and should respond to the issues during T&I.
• Attends the Project meetings and update the status.
• Liaises and review with T&I companies’ regarding transportation and Installation process, approach and time-lines to de-risk changes to schedule.
• Develops and drive the logistics concepts for project from conception to completion.

Requirements:

• Bachelor’s degree in Electrical and Electronics Engineering or related engineering disciplines
• 3-5 years’ experience related experience
• Knowledge in EPC projects for O&G, Offshore Renewables & system
• Proficient in MS office applications
• Dynamic, self-motivated, proactive and results oriented

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

BMS Engineer

Responsibilities

• Design and Implement Lighting Control System and Hotel Guestroom System
• Testing and commissioning of Lighting Control System and SCADA
• Project implementation and Project Management
• General server administration and database management

Requirements

• 1 year working experience in the Lighting, AV, CCTV, Building Automation Industry
• Self-motivated and able to work independently
• Diploma/Degree in Electrical/Electronic/Information Technology/ Computer Science or equivalent.
• Working experience with Lutron, KNX Lighting Control advantageous
• CAD Drawings
• Benefits: Excellent Career Advancement, Attractive Salary, AWS, Bonus

Job Description

- Proposed CAAS Extension of ATCC

Requirements

- At least 5 years of supervisory experience in supervision of Civil/Structural works, RC & steel works.

- Experience in supervision of medium to large scale building works, piling works, temporary works, Ground Building Works (GBW) for Government Institutional projects.

- To provide full supervision works to ensure works are carried out in accordance to approved plans under Building Control Act.

- Assist QP to keep and maintain site records.

- Job site is at Sealand Road, Changi Area, must be willing to travel and work at that area

- Able to lead a team of site staffs.

- Possess Degree in Civil Engineering recognized by PEB and registered with IES as Resident Engineer

Interested applicants to reply to:

[email protected]

Quote: SG510

Submit resume with photo including current and expected salary and contact no. latest by 31 December 2024.

We are representing our client in the Security industry to hire for a Project Engineer.

Responsibilities:

• Oversee and coordinate project tasks with Engineers and Technicians to ensure success.
• Monitor project schedules, budgets, and quality standards.
• Collaborate with clients to meet project requirements.
• Perform system programming and troubleshoot issues during implementation.

Requirements:

• Diploma/Higher Nitec in Electrical, Electronics, or related Engineering fields.
• 1-2 years of experience in site supervision and contractor coordination.
• Hands-on experience with alarm, card access, and CCTV system installations.

Interested candidates, please apply here.

EA Personnel (Koh Pei Wen)

EA Reg: R23115205

APBA TG Human Resources Pte Ltd

EA License: 14C7275

Responsibilities :

• Attending sites survey, precon survey, site inspection and handover
• Handling Contractor, assigning sites to subcons
• Draft technical proposal
• Liaise with other authorities such as HDB, LTA, Building Owner for Private sites
• Material & equipment acquisition, project coordination, progress monitoring, site technical support and as-built preparation and submission.
• Site handover with Client
• Coordinate with subcon and customer for site installation work.
• Follow up with contractors and update the status to client and Project Manager
• Attending site meeting and survey with Building Owner.

Requirements :

• Diploma / Bachelor’s Degree in Telecommunication or equivalent
• Preferred 2 years experience in telecommunication field
• Good communication skills, able to interact with people of all levels
• 5.5 days work week
• Woodland area

Summary:

We are seeking a highly skilled and experienced Data Engineer to design, develop, and deploy big data solutions. The ideal candidate will have strong expertise in designing and architecting large-scale data platforms using advanced technologies such as Cloudera, Azure Cloud, and Kubernetes, among others.

Key Responsibilities:

• Responsible for the design, architecture, and implementation of end-to-end Big Data solutions.
• Apply data mining and data modeling to build data analytic solution based on project requirements. Collaborate with data science and engineering teams to optimize the deployment of data models and machine learning pipelines.
• Design and architect scalable solutions using technologies like Cloudera Machine Learning, Elasticsearch, and AML applications. Actively involve in the integration of Cloudera CDH/CDP platforms for data management and analytics.
• Ensure high availability and disaster recovery of big data platforms using technologies like Kubernetes, VMWare, and Azure Cloud.
• Automate infrastructure and deployment processes using Chef and Shell scripting.
• Implement monitoring and observability solutions using Prometheus, Grafana, and other monitoring tools.
• Manage security frameworks for big data environments using CyberArk and Trend Micro.
• Perform infrastructure troubleshooting and manage incident resolution using Remedy.
• Optimize database performance and management using PostgreSQL.
• Collaborate with cross-functional teams to ensure secure, reliable, and scalable infrastructure on HPE servers.

Required Skills & Qualifications:

Education:

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or related fields.

Experience:

• At least 5 years of experience in Big Data architecture and infrastructure.

Technical Expertise:

a) Cloudera CDH/CDP platforms and Cloudera Machine Learning.

b) Azure Cloud architecture and deployment.

c) Experience with Kubernetes, VMWare, RHEL, and container orchestration.

d) Monitoring tools: Prometheus, Grafana.

e) Security tools: Trend Micro, CyberArk.

f) Scripting: Shell scripting and automation with Chef.

g) Strong experience with Tableau and SAS for data visualization and analytics.

h) AML application expertise and experience with Elasticsearch.

i) Database expertise in PostgreSQL.

j) Strong experience in infrastructure management with HPE servers.

k) Proven experience in working with cloud and on-premise environments.

Preferred Skills:

a) Experience with disaster recovery, high availability, and security compliance.

b) Experience with DevOps practices and continuous integration (CI) pipelines.

c) Experience managing large-scale environments and multi-tier architectures.

Soft Skills:

a) Strong problem-solving and critical-thinking skills.

b) Excellent communication and leadership abilities.

c) Ability to work collaboratively in a fast-paced, dynamic environment.

d) Strong organizational and multitasking skills.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

Responsibilities:

• Understand and analyse the customer’s needs;
• Find the best solution and lead the architecture definition to meet the customer requirements;
• Interface with the customer, for the technical related aspects of the solution;
• Support the sales and marketing teams by providing internal and external technical pre-sales support for the solutions and services, taking the lead of the architecture aspects in strong cooperation with all the required technical and non-technical skills involved (e.g. hardware, software, security, quality, maintenance);
• Lead the Make/Team/Buy decision process and support the partner & subcontractor choice throughout the capture & delivery activities;
• Be in charge of the executive and technical documentation for tenders and support handover to projects (including but not limited to design documentation);
• Support when needed the teams responsible for the implementation and testing of the solution by providing technical expertise on various aspects of the solution under development, ensuring the design and development goals until the final phases of the bid/project.
• Any other ad hoc duties as assigned by supervisor.

Qualifications:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Trellix or SSE product such as Netskope/SkyHigh Security/Versa Networks
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Job Scope:

• Design and develop an extract, transform, load (ETL) ingestion & transformation using Azure Data Bricks (Pyspark - Notebooks) & Azure Data Factory (ADF).
• Design and implement a data storage solution using Azure Data Lake.
• Migrate on-prem SQL data warehouse to Azure Synapse (Azure SQL DW).
• Engage and collaborate with customers to understand business requirements and translate them into detailed technical specifications.
• Involve in data modeling and designing the solution for entire Business Intelligence Warehouse.

Job Qualifications:

• Degree in Computer Science or equivalent.
• Solutioning and hands-on experience in Azure Synapse, Azure Data Factory or similar toolset.
• Basic knowledge of DB2, MSSQL, cloud infrastructure and security.
• Experience in troubleshooting and resolving data migration issues.
• Experience in managing data cleansing activities, analysis, tracking, and stakeholder management.
• Experience in integrating data from multiple sources to produce requested or required data elements.
• Demonstrated professional experience in data mining, analysis and modeling of large-scale complex data sets.
• Exceptional written and verbal communication and presentation skills.

Interested candidates can click apply for more information.

** We regret to inform that only shortlisted candidates will be notified. **

We respect your privacy and all communication will be treated with confidentiality. If you wish to know more about this position or explore other roles, please prepare your updated profile and get in touch with our consultants.

Please note that your response to this advertisement and communications with us pursuant to this advertisement will constitute informed consent to the collection, use and/or disclosure of personal data by Manpower for the purpose of carrying out its business, in compliance with the relevant provisions of the Personal Data Protection Act 2012.

Rallonza Bernice Mae Nocum | EA License No. 02C3423 Personnel | Registration No. R1442141

Job Description:

• Must be a Diploma/Bachelor's Degree holder.

• Hands-on implementation experience in building full-stack Restful web Applications.

• Experience in the following domain area/Technology/Programming languages

• Communication/Data Protocols: Modbus, OPC UA/AD, IEC 101/104, TCP/IP, SFTP, MQTT, AMQP

• Programming languages: JavaScript, Python, C/C++, SQL

• Experience in Linux, Docker, PostgreSQL, And Firewall management

• Experience in Code Management and Deployment

• Certified in Microsoft Technologies will be an added advantage

• Knowledge in Azure Devops, Azure IOT and Azure sphere will be an added advantage.

Roles and Responsibilities:

• The candidate will be responsible for designing and implementing data acquisition solutions and systems that meet the requirements of our clients.

• The successful candidate will be expected to have strong problem-solving skills and be able to troubleshoot and debug complex issues.

• The candidate will also be responsible for developing and maintaining documentation for solutions, including design specifications and test plans.

Responsibilities

• Work closely with team members (developers, product manager, customer support, and partners) to develop, test and deliver high quality products.
• Prevent, collect, analyze and track product defects.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Manage project dependencies and risk mitigation.

Minimum Qualifications

• 5+ years​ experience in automation testing development.
• Experience in writing clear, concise and comprehensive test plans and test cases.
• Experience in testing Webservice/Restful APIs and have a certain understanding of commonly used databases like MySQL.
• Good programming skills, hands on with at least one of the following languages: Java, Javascript, Python.
• Solid analytical and trouble-shooting skills.
• Good understanding of Agile/Scrum development methodologies as well as using collaboration tools, such as Jira, Trello, Slack, etc.
• Excellent interpersonal coordination and communication skills.
• Self-motivated, able to work independently as well as work as a team.
• Good exposure in a distributed/remote working environment.
• Enjoys breaking things and solving problems - not just able to find out the 'what', but also the 'why'.

Preferred Qualifications

• Experience on performance testing is a plus.
• Experience with automation build up.
• Skilled use of at least one source code management tool: SVN, Git, etc.

Job Description:

• Manage team of the site supervisors
• Appointed by QP(S) to be full time on site carrying out the duties of the QP(S)’s roles and responsibilities as required by BCA
• Site supervision/inspection of construction works
• Liaise with all parties involved in the project
• Monitor and ensure all works carried out as per specification/approved construction drawings
• Maintain & control site records as per BCA requirement
• Attend site meeting with Authority's Representative and Authority's Appointed Consultant project staff and assist in preparation of the meeting minutes and presentation with Station experience is required.

Job Requirements:

• Minimum eight (8) years of post-graduate experience as a civil engineer, of which at least three (4) years of experience in heavy civil/ structural engineering works. Experience in Station will be required.
• Degree in Civil Engineering recognised by the PE Board and qualification accredited by Joint Accreditation Committee of IES/ACES as Qualified Site Supervisor as defined under the Building Control Act.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

This is a 12-months contract as a Test Engineer.

Job Summary:

We are looking for a Test Engineer who will thoroughly inspect our products before they’re launched.

Job Responsibilities:

• Work closely with the production/development team to understand new products and their specific requirements;
• Establish testing framework to include necessary contributions from various teams and facilitate collaboration;
• Create test plans for different testing projects;
• Perform a series of strict tests throughout all stages of production to identify potential malfunctions;
• Analyse business requirements and technology options and improve testing procedures;
• Analyse test results and identify the root cause of malfunctions;
• Recommend improvements based results and findings;
• Ensure final products meet the company's safety and quality standards.

Job Requirements:

• Previous experience as a Test Engineer or similar role for more than 8 years;
• Familiarity with various testing techniques, familiar with Java/Rust/SQL;
• Hands-on experience with certain Quality Management Systems, like Jira/Confluence;
• Knowledge of quality standards and regulations;
• Great troubleshooting skills;
• Analytical mindset;
• Humble and cautious collaborative attitude.

We regret to inform that only shortlisted candidates will be contacted.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities

• Preparation of tender and contract documents including BQ
• Prepare and analyze costing for tenders
• Cost planning, estimation and measurement of quantities
• Assist in preparation of budget for M&E works
• Update M&E drawing
• Design drawing, design calculation
• Sourcing for sub-contractors and suppliers and price negotiation
• Support and tender multiple M&E projects concurrently
• Lead pre-tender meetings and brief team members’ duties during estimate preparation and submission stage
• Ensure tenders are well documented in a timely manner
• Coordinate with client and internal departments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Mechanical/Electrical Engineering or related field
• Minimum 2 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Software Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design solutions that meet functional requirements.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Participate in impact analysis of encountered issues.
• Contribute to continuous improvement of software development best practices in the areas of coding tools, languages and APIs, as well as software design and development processes.

Participate in UX activities such as:

• Conduct user research/interviews
• Develop user stories, storyboards to articulate current and future concepts
• Create wireframes, detailed visual mock ups and interactive prototypes
• Create style guides and digital assets for production

Requirements:

• At least 2 – 3 years’ Software Engineer experience, with strong expertise in at least of the following languages: Java, JavaScript, Python, C#, .Net.
• Good understanding of software development lifecycle processes
• Proficiency in Web Technologies such as HTML, CSS
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

• MNC
• Basic up to $3,500 + AWS + Variable Bonus
• Fixed overseas travel allowance
• Food & Accommodation included overseas
• Monday – Friday, 8:15am – 5pm
• Location: Redhill

Responsibilities

• Perform site acceptance tests, commissioning, start-up support, and troubleshoot maintenance issues for Insulating Glass machines.
• Interface with customers to address service needs, provide technical support, and ensure satisfaction.
• Deliver training to optimize product use and coordinate repair schedules.
• Provide field feedback for product improvement and ensure compliance with validation requirements.
• Maintain customer complaint records, prepare failure analysis reports, and support project goals with engineering and sales teams.

Requirements

• Min. ITE in Electrical, Mechanical, or Mechatronic Engineering, or equivalent.
• Proficient in reading technical drawings.
• Min. 1 year of experience in a technical servicing role.
• Open to traveling frequently within the SEA/AUS/NZ region for service assignments.
• Class 3 driving license is an added advantage.
• Bilingual in English and Mandarin to support Mandarin-speaking customers from China/Taiwan.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected]

**Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752
EA. Registration No.: R24123733 | Chen Yit Keat

Company Overview

The team has more than 15 years of experience developing 1G/2.5G/5GBase-T Ethernet physical layer PHY and switch chips for data centers, enterprise networks, and gateways and has successfully developed multiple generations of the most competitive products.

The company is headquarted in Kunshan, and the R&D team is located in Kunshan, Suzhou, Shanghai, and Singapore and plans to setup an R&D center in Silicon Valley.

The company is currently developing Ethernet PHY, gateway, and TSN switching chips. The target market is automotive & unpiloted driving, China's intelligent manufacturing, rail transit, and intelligent grid building industry provide domestic chips with "Independent intellectual property rights, independent and controllable.

We offer attractive salary commensurate with work experience + AWS + Bonus + Stock options

Job Responsibilities:

1. Help define analog system design specifications and architectures.
2. Lead analog designs during product development.
3. Participate in the design and realization of high-speed low-power small-area network chips.
4. Responsible for the design and verification of analog and mixed-signal circuits, particularly the CMOS signal processing circuits with profession in one of these areas, RX(e.g., AFE, ADC), TX(Serializer, DAC), PLL, LDO, ESD/EMC suppression etc.
5. Support high-level functional development and verification of analog and mix-circuit circuitry.
6. Cooperate with product definition, layout implementation, lab test and verifications.

Job Requirements:

1. Master with > 7 years' experience or PhD with > 4 years' experience in high-performance analog/mixed-signal ICs.
2. Proven experience in IC design including chip tape-out and lab evaluation of design.
3. Solid experience in using EDA CAD tools and performing Analog Custom Layout.
4. Experience in measuring IC performance and debug of design to correlate simulations to measurements.
5. Deep understanding of fundamental, including: detailed transistor level design, device physics, control/feedback loop stability analysis.
6. Direct project experience in at least one of the following areas a plus: ADC-DAC design PLL or clock/freq generation design.
7. Knowledge & experience in Verilog coding a plus.
8. Strong communication skills and good team player.

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Responsibilities

• Work closely with team members (developers, product manager, customer support, and partners) to develop, test and deliver high quality products.
• Prevent, collect, analyze and track product defects.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Manage project dependencies and risk mitigation.

Minimum Qualifications

• 5+ years​ experience in automation testing development.
• Experience in writing clear, concise and comprehensive test plans and test cases.
• Experience in testing Webservice/Restful APIs and have a certain understanding of commonly used databases like MySQL.
• Good programming skills, hands on with at least one of the following languages: Java, Javascript, Python.
• Solid analytical and trouble-shooting skills.
• Good understanding of Agile/Scrum development methodologies as well as using collaboration tools, such as Jira, Trello, Slack, etc.
• Excellent interpersonal coordination and communication skills.
• Self-motivated, able to work independently as well as work as a team.
• Good exposure in a distributed/remote working environment.
• Enjoys breaking things and solving problems - not just able to find out the 'what', but also the 'why'.

Preferred Qualifications

• Experience on performance testing is a plus.
• Experience with automation build up.
• Skilled use of at least one source code management tool: SVN, Git, etc.

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning & execution of all new and retrofit projects related to utilities & facilities.

· Ensuring the best available technologies are incorporated by design.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Delivering the project within the budget and timeline approved.

· Responsible for relevant project costing and annual budget preparation related to engineering, facilities and EHS.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure the site's facilities are kept to the highest standards for cGMP requirements, including Purified water system, WFI System, HVAC system, EMS, BMS, Boilers, fire safety, security, pest control, cleaning services and waste removal.

· Responsible for development SOPs and quality standard for site with following of site QMS procedures.

· Ensure to meet the required regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready for all the time.

· Responsible for managing a team of vendors / contractors.

· To assist on any ah-hoc duties that have been assigned / task by the immediate Superior

Education:

· Bachelor’s / master’s degree in mechanical engineering or a related field. SCEM, Water efficiency Manager will be an added advantage.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.