Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.

• Able to liaise with consultants and subcontractors.

• Able to work independently and as a key member of the Site Management.

• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.

• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.

• Ensure all works are carried out within schedule and maintain the required quality.

• Ensure work safe environment at the work site and manage workers.

• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.

• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.

• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

• Responsible for general on-site technical and engineering matters.

• Quality Control.

• Co-ordination of works with subcontractors.

• Liaise with the consultants on technical and quality issues.

• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent

• Required skill(s): MS Office, preferable candidate with AutoCad skills

• Minimum 2 years Site/Working Experience. Candidate with LTA Projects experience will be advantage.

RESPONSIBILITIES

• Be part of the site team to perform engineering design, project management and oversee drawing management, and control of technical documentation;
• Good knowledge of Singapore Building Regulations and codes, design development & detailing;
• To assist Project Manager for site planning, coordination, supervision, monitoring and inspections
• To ensure site activities are executed in full compliance with technical specification and approved drawings within project budget and schedule;
• To liaise with authorities, consultants and subcontractors for technical submittal and approval;
• To adhere to construction procedures and safe work practices;
• To ensure efficient control and use of manpower, equipment and materials onsite without wastage;
• Others ad-hoc related duties as assigned.

Requirements:

• Possess a Bachelor Degree in Civil Engineering duly recognised by Professional Engineer Board of Singapore and accepted universities within the BCA listing.
• At least 3 years in relevant working experience in local construction industry;
• Self-motivated, independent and good interpersonal & communication skills

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

• Take instruction from/assist reporting to superior.
• Produce sketch drawings.
• Set design criteria , check design calculation and drawings.
• Assist in technical proposals.
• Check documentation complies with design criteria/Client brief/Approved concept/Standard.
• Liaise/attend clients, architects and site meetings.
• Maintain and check for completeness record, etc.
• Resolve any technical problems faced during the project design and/or construction stages.
• Other ad-hoc assigned by Director.
• At least 5 years of working experience in the construction industry.
• Candidate must possess a least bachelor's degree/post graduate diplima/professional degree in Engineering Mechanical or equvalent.
• Relevant project experience in HVAC/ACMV/MEP system both in design and project management.
• Strong knowledge of M&E installation, current practices, code and authorities requirement.
• Knowledge in ACMV product R&D preferred.
• Knowledge in Auto Cad and BIM preferred.

Key Accountabilities:

• Undertake independently the commissioning, installation, maintenance and repair/overhaul of MTU products and its associated equipment at MTU workshop or at site in accordance with MTU manuals and/or specific given instructions.
• Capable in resolving the technical matters and completing the services according to the works order and to the acceptance of the Customers and Supervisors, thereafter, provide the service/investigation reports where applicable.
• Liaise with Supervisors and in-house Technical Specialist for technical assistance, if required.
• Develop and update own skills and knowledge to meet the job requirements through training and self - learning.
• Advise, instruct and train the team members in carrying out the assigned tasks, in using of MTU documentations, tools, customers' drawings, etc.
• Observe the safety regulations of WSHA and guidelines/risk assessment from the company's WHS Committee when performing work at-site or at customer's premises.
• Work assigned from time to time

Qualifications:

• Diploma in Mechanical or Electrical Engineering
• Preferably with working experience on diesel engine.
• Good communication and interpersonal skill, resourceful, team player
• Willing to travel overseas on job assignments

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field
• 5+ years of experience in instrumentation and control system design, analysis, and implementation
• Proficiency in using CAD software for control system design
• Experience with control system programming and software tools such as PLC programming, DCS programming, or SCADA systems
• Knowledge of codes, standards, and regulations related to instrumentation and control systems, such as ISA, IEC, and NEC
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Experience with industrial processes and equipment, such as pumps, motors, and valves, is a plus
• Professional Engineering (PE) license is preferred

• Instrumentation and control systems for industrial processes should be designed, developed, and tested.
• Choose and specify instrumentation parts, such as controllers, transmitters, and sensors.
• Using CAD software, create schematics, diagrams, and layouts for control systems.
• Using software tools like PLC programming, DCS programming, or SCADA systems, develop and put into practice control plans.
• For planned initiatives, carry out cost-benefit evaluations and feasibility studies.
• Ensure that projects are finished on schedule and under budget by working together with project managers, other engineers, and clients.
• Review and approve instrumentation and control system design documents, including specifications, drawings, and calculations.
• Prepare and present technical reports and presentations to clients and other stakeholders.
• Ensure that instrumentation and control systems are designed and installed in compliance with applicable codes, standards, and regulations.
• Provide technical guidance and support to other team members.
• Keep abreast on new developments in the field of instrumentation and control systems as well as market trends.

Responsibilities:

• Take ownership of primary Sales Business Unit, and support assigned secondary Sales Business Unit.
• Establishes prospects within defined business segment
• Sales forecast and planning
• To participate and contribute to planning and meeting both long term and short-term business plan goals at both a strategic and tactical level
• To analyze targeted market segments for opportunities and work with functional teams on strategic projects to win new business
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Research competition and develop customer-specific technical sales strategies
• Responsible for sales turnover through product specifying into target projects through Consultants, Architects or Developers
• Responsible for customers’ technical needs assessment and analysis
• Anchor design and product recommendation to customers
• Support system proposal development, and proposal delivery to customers
• Work closely with various departments to develop winning technical offers, as well as to participates in the preparation of bid responses based on system designs and project specification
• Provides basic training and presentation about products and system solutions to clients
• Provide technical support at construction field, including on-site technical discussions, on-site installation demonstrations, etc.

Job Requirements:

• Experience in Coating/Construction Industry
• Proficient in Microsoft Office and Powerpoint
• Excellent presentation and communication skills, both verbal and written

Essential Attributes:

• Self-driven and willing to take up challenges
• Able to work independently as well as with other team members
• Strong interpersonal and excellent communication skills
• Creative and resourceful individual who possess strong determination for success

Education and Certification:

• Minimum Diploma or Degree in Engineering or equivalent
• Candidates posses own transport

Responsibilities:

• Take ownership of primary Sales Business Unit, and support assigned secondary Sales Business Unit.
• Establishes prospects within defined business segment
• Sales forecast and planning
• To participate and contribute to planning and meeting both long term and short-term business plan goals at both a strategic and tactical level
• To analyze targeted market segments for opportunities and work with functional teams on strategic projects to win new business
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Research competition and develop customer-specific technical sales strategies
• Responsible for sales turnover through product specifying into target projects through Consultants, Architects or Developers
• Responsible for customers’ technical needs assessment and analysis
• Anchor design and product recommendation to customers
• Support system proposal development, and proposal delivery to customers
• Work closely with various departments to develop winning technical offers, as well as to participates in the preparation of bid responses based on system designs and project specification
• Provides basic training and presentation about products and system solutions to clients
• Provide technical support at construction field, including on-site technical discussions, on-site installation demonstrations, etc.

Job Requirements:

• Experience in Coating/Construction Industry
• Proficient in Microsoft Office and Powerpoint
• Excellent presentation and communication skills, both verbal and written

Essential Attributes:

• Self-driven and willing to take up challenges
• Able to work independently as well as with other team members
• Strong interpersonal and excellent communication skills
• Creative and resourceful individual who possess strong determination for success

Education and Certification:

• Minimum Diploma or Degree in Engineering or equivalent
• Candidates posses own transport

Responsibilities:

• Drive optimization of plant capacity, equipment uptime and yield by safe, disciplined & cost-effective operations.
• Provide facilitative leadership and technical expertise in the daily operations of the unit to assist operators in resolving performance gaps vs. production plan.
• Optimize equipment maintenance and/or plant turnaround based on business requirements and/or production schedule.
• Review and reduce energy consumption through implementation of programs, initiatives and projects in the process and utility areas.
• Drive the development and enhancement of the skills of shift team technicians.
• Promote quality culture and drive work discipline in day and shift team operations.
• Participate in review of process and operations (through process safety management) to enhance process safety.
• Develop and lead data-driven productivity initiatives.
• Work with Reliability Engineers in identification of root cause for equipment failure and development of long-term resolutions.

Requirements:

• Bachelor’s degree in chemical, Mechanical or Electrical Engineering
• At least 2 years’ relevant experience in technical/operations function in petrochemical/chemical manufacturing.
• Those without experience but are interested in Chemical Engineering are encouraged to apply.
• Demonstrated ability to understand and apply technical knowledge in chemical process.
• Resourceful and possess excellent analytical & interpersonal skills.
• Willing to work in 12-hour rotating shift environment.

• Instrumentation and control systems for industrial processes should be designed, developed, and tested.
• Choose and specify instrumentation parts, such as controllers, transmitters, and sensors.
• Using CAD software, create schematics, diagrams, and layouts for control systems.
• Using software tools like PLC programming, DCS programming, or SCADA systems, develop and put into practice control plans.
• For planned initiatives, carry out cost-benefit evaluations and feasibility studies.
• Ensure that projects are finished on schedule and under budget by working together with project managers, other engineers, and clients.
• Review and approve instrumentation and control system design documents, including specifications, drawings, and calculations.
• Prepare and present technical reports and presentations to clients and other stakeholders.
• Ensure that instrumentation and control systems are designed and installed in compliance with applicable codes, standards, and regulations.
• Provide technical guidance and support to other team members.
• Keep abreast on new developments in the field of instrumentation and control systems as well as market trends.

Role based in Sydney, Australia - Relocation Support Provided

We are Rokt, a hyper-growth ecommerce leader. We enable companies to unlock value by making each transaction relevant at the moment that matters most, when customers are buying. Together, Rokt's AI-based relevance Platform and scaled ecommerce Network powers billions of transactions. In December 2022, Rokt’s valuation increased to $2.4 billion USD, allowing us to expand rapidly across 15 countries. 

The Rokt engineering team builds best-in-class ecommerce technology that provides personalized and relevant experiences for customers globally and empowers marketers with sophisticated, AI-driven tooling to better understand consumers. Our bespoke platform handles millions of transactions per day and considers billions of data points which give engineers the opportunity to build technology at scale, collaborate across teams and gain exposure to a wide range of technology.

At Rokt, we practice transparency in career paths and compensation.

At Rokt, we believe in transparency, which is why we have a well-defined career ladder with transparent compensation and clear career paths based on competency and ability. Rokt’stars constantly strive to raise the bar, pushing the envelope of what is possible.

We are looking for a Senior Machine Learning Engineer

Compensation: $190,000-$235,000 AUD including superannuation, plus employee equity plan grant & world class benefits.

As a Senior Machine Learning Engineer, you are someone who has significant expertise in both machine learning and software engineering. You will be working with our engineering and product teams to design, build and productionise proprietary machine learning models to solve different business challenges including smart bidding, lookalike modelling, forecasting, etc.

About the Role:

• Collaborate closely with product managers and other engineers to understand business priorities, frame machine learning problems, and architect machine learning solutions.
• Build and productionise machine learning models including data preparation/processing pipelines, machine learning orchestrations, improvements of services performance and reliability and etc.
• Contribute and maintain the high quality of the code base with tests that provide a high level of functional coverage as well as non-functional aspects with load testing, unit testing, integration testing, etc.
• Keep track of emerging tech and trends, research the state-of-art deep learning models, prototype new modelling ideas, and conduct offline and online experiments.
• Share your knowledge by giving brown bags, tech talks, and evangelising appropriate tech and engineering best practices.

About You:

• PhD in Machine Learning [Nice to have]
• Extensive knowledge in and experience with some of the following areas - Bayesian methods, Recommender systems, multi-task modelling, meta-learning, click through rate modelling or conversion rate modelling.
• 3+ years of industry experience in building production-grade machine learning systems with all aspects of model training, tuning, deploying, serving and monitoring.
• Experience with Kubeflow (or similar), Tensorflow and Feature Store in a production environment is a massive plus.
• Bonus points if you are familiar with any of the following architectures or have experience with the models mentioned in this benchmark: DCNV2, MMOE, Deep & Wide, ESMM, xDeepFM, and GDCN.

This role is based in Sydney, Australia. Rokt will provide relocation and visa support to qualified candidates.

About Rokt’stars:

As a mission-driven, hyper-growth community of curious explorers, our ambition is to unlock the full potential in ecommerce and beyond. Our bias for action means we are not afraid to quickly venture into uncharted territories, take risks or challenge the status quo; in doing so we either win or learn. We work together as one aligned team never letting egos get in the way of brilliant ideas. We value diversity, transparency and smart humble people who enjoy building a disruptive business together. We pride ourselves on being a force for good as we make the world better. 

About The Benefits:

We leverage best-in-class technology and market-leading innovation in AI and ML, with all of that being underlined by building and maintaining a fantastic and inclusive culture where people can be their authentic selves, and offering a great list of perks and benefits to go with it:

• Accelerate your career. We offer roadmaps to leadership and an annual $5000 training allowance
• Become a shareholder. Every Rokt’star gets equity in the company
• Enjoy catered lunch every day and healthy snacks in the office. Plus join the gym on us! 
• Extra leave (bonus annual leave, sabbatical leave etc.) 
• Work with the greatest talent in town
• See the world! We have offices in New York, Seattle, Sydney, Tokyo and London

We believe we’re better together. We love spending time together and are in the office most days (teams are in the office 4 days per week). We also get that you need to balance your life and your commitments so you have the flexibility to manage your own hours and can spend up to a week of every quarter working from anywhere.

If this sounds like a role you’d enjoy, apply here and you’ll hear from our recruiting team.

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation).
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID, Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.

Requirements:

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above.
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities:

• Preventive and corrective maintenance for DRUPS (Dynamic Rotating UPS) at customers sites.
• Perform schedule preventive maintenance program at various customers’ sites.
• Attend trouble shooting and corrective repair on site
• Identify issues and potential issues from PM activities, provide feedback and possible solution to back office for issue resolution discussion with customers.
• Generate and maintain lean and clear documentation like service report from every service activity.
• Others maybe be needed for customer services.

Requirements:

• Diploma or Degree and above with M&E Engineering background.
• 2-3 years Relevant M&E engineering service or project management experience.
• Good knowledge on electrical system, mechanical, electrical rotating machine functionality, and service methodologies.
• Ability to handle high reliability service demand with technical solution.

We are seeking an experienced and forward-thinking Investment Project Engineer to join our team and be stationed in Singapore. This pivotal role will focus on supporting and driving investment projects to ensure stable and sustainable investment for future growth.

The ideal candidate will play a crucial role in establishing a consistent organization dedicated to long-term investment stability, collaborating closely with both the Japan Mazak staff and the YMS investment team.

Key Responsibilities:

· Lead and support investment projects, ensuring they align with the company's strategic objectives.

· Collaborate with Japan Mazak and cross-functional teams to support YMS investment initiatives, technical requirement and ensure seamless project execution.

· Establish and maintain a consistent organizational framework to ensure future stable investment.

· Conduct thorough reviews of current manufacturing processes and identify areas for enhancement.

· Develop and manage project budgets, timelines, adherence to design specifications and resource allocations.

· Foster strong relationships with internal and external stakeholders to facilitate successful project outcomes.

· Conduct risk assessments and develop mitigation strategies to ensure project success.

· Serve as a key point of contact and resource for manufacturing investment-related inquiries and initiatives.

· Prepare detailed reports and presentations for senior management, highlighting project progress, challenges, and opportunities.

· Stay abreast of industry trends and technological advancements in machine tool manufacturing that could impact investment strategies.

Job Requirements

Education:

· Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Project Management, or a related field.

Experience:

· A minimum of 5-7 years of experience in managing and supporting large-scale investment projects, with a specific focus on equipment manufacturing.

· Proven track record of successfully leading investment initiatives within the equipment manufacturing industry.

· Extensive experience working within Japanese business culture and practices, ideally in a multinational corporation.

Technical Skills:

· In-depth knowledge of equipment tool manufacturing processes, technologies, and industry standards.

· Proficiency in Microsoft Application and possess strong knowledge and mastery of 2D CAD, SolidWorks software, etc

· Strong financial acumen with experience in budgeting, forecasting, and financial analysis related to investment projects.

· Excellent understanding of risk management principles and the ability to develop and implement effective risk mitigation strategies.

Soft Skills:

· Exceptional leadership and organizational skills with the ability to manage and mentor project teams.

· Strong communication and interpersonal skills, with the ability to effectively collaborate with cross-functional teams, stakeholders, and senior management.

· Bilingual proficiency in Japanese and English, with excellent written and verbal communication skills in both languages.

· Strategic thinking and problem-solving abilities to anticipate challenges and devise effective solutions.

Professional Attributes:

· Demonstrated ability to establish and maintain consistent organizational frameworks to support stable future investments.

· Commitment to continuous improvement and innovation in investment project management practices.

· High level of integrity and professionalism in all aspects of work.

Industry-Specific Experience:

· Extensive knowledge of the equipment manufacturing industry, including current trends, challenges, and opportunities.

· Experience in evaluating and integrating new technologies and processes in the equipment manufacturing sector.

· Familiarity with regulatory requirements and standards specific to equipment manufacturing.

Cultural and Business Acumen:

· Deep understanding of Japanese business etiquette, culture, and communication styles.

· Experience in navigating and bridging cultural differences in a global business environment.

· Ability to build and maintain strong relationships with Japanese and local stakeholders.

Manufacturing Engineer (Machining)

This position reports to the Technical Manager and is responsible to provide technical support to the machine shop and subcontract vendors on complex machining methods for both Premier Hytemp Singapore and Malaysia. Technical support may involve design tooling, fixtures, and machining methods for complex features and new product qualifications. The Manufacturing engineer is responsible to lead acquisition and implementation of latest technology (machines) to improve capability and efficiency.

Responsibilities

• Evaluation of complex machine drawings for manufacturing
• Propose and implement tooling & fixtures for machining of complex features
• Support Manufacturing team on new product qualifications and ensure manufacturing is achieving most optimized and competitive hours
• He or she must have strong knowledge on CNC machining process with strong understanding and capability to design fixture or use on best tooling to achieve optimized and competitive machining capability
• Work with Procurement team to develop strategic sub-con machining supplier
• Source and develop new relevant and good machining vendors to company’s approved vendor list
• Provide technical guidance and ensure supplier passes first article approvals
• Involved in daily MRB (Material Review Board) meeting to provide technical input for jobs when non-conformance occurs
• Continuously seek and work on cost savings and new customer development projects
• Initiate and lead continuous improvement projects

Requirements and Qualifications

• Minimum Degree or Diploma in Mechanical Engineering or related field with at least 5+ years of relevant experience
• Candidate should have a strong background in CNC machine shop environment
• Exposure to machining of complex parts for oil & gas equipment is preferred
• Good mechanical / technical skills
• Good understanding of ANSI, ASME Standards and API Products requirements
• Proficient in design and programming software like AutoCAD, Solidworks & MasterCam etc
• Strong communication and analytical skills, team player, energetic and willing to work hard
• The candidate needs to be self motivated with positive attitude and seek career growth
• Ability to prioritize and multi-task in a fast-paced environment

Job Description:

Repair

• Analyse errors independently
• Identify needed spare parts, agree and arrange on order with customers
• Carry out repairs (e.g. mechanics, electronics, hydraulics, control technology, pneumatics)
• Agree on solutions with experts from own area and Regional Service Center
• Documentation of carried out service missions

Installation/Commissioning

• Prepare installation together with customer
• Mechanical and electrical installation of the equipment
• Commissioning of the installation
• Providing operator training on site

Preventive maintenance

• Preventive maintenance according to servicing list
• Advice customers about necessary repair work, if necessary, agree on spare parts with customer and order them
• Documentation of carried out maintenance work

Further responsibilities

• Carry out relocation and retrofitting
• Carry out Service-Updates and data protections

Job requirement:

• Bachelor’s Degree or Polytechnic Diploma in Mechanical/Mechatronic/Electrical Engineering as or equivalent
• Working experience in Repairing, Commissioning and Installing of CNC Sheet Metal Punching /Laser cutting machine.
• Minimum 5 years of relevant experience
• Customer focus
• Communication skills
• Ability to convince customer
• Flexible adaptation to different situations and changing work conditions
• Analytical thinking
• Anticipates problems and takes actions to resolve them
• Cooperates and shares information and knowledge, offers support to colleagues

We are seeking an exceptionally skilled and detail-oriented NDT

Systems Engineer to join our team. This role demands extensive

expertise in advanced NDT methods, system design, programmin

and hands-on testing. The ideal candidate will have a proven trac

record in operating and programming advanced NDT equipment,

including PAUT, ToFD, DRT, ECT, and ACFM, and will possess

advanced skills in software and mechanical design.

1. Advanced NDT Equipment Handling:

Phased Array Ultrasonic Testing (PAUT): Operate PAU

systems, including setting up and calibrating equipment

configuring probe arrays, and conducting complex

inspections on various materials.

Direct Radiography Testing (DRT): Execute DRT

procedures, including optimizing exposure parameters,

interpreting radiographic images, and ensuring complia

with safety and quality standards.

Eddy Current Testing (ECT): Perform ECT for detecting

surface and near-surface flaws, including setting up test

parameters and analyzing signals.

Alternating Current Field Measurement (ACFM): Utili

ACFM to detect and size surface-breaking defects, includ

setting up equipment and interpreting measurement da

2. System Design and Programming:

Automatic Immersion Systems: Design, program, and

implement automated immersion systems for ultrasoni

testing. This includes developing custom software soluti

and integrating with hardware components.

Software Simulation: Use CIVA software to simulate an

model NDT scenarios, optimizing test setups and predic

inspection outcomes.

Equipment Programming: Develop and troubleshoot

custom programming for ultrasonic testing equipment,

including creating scripts for specific test procedures an

automating test sequences.

3.Technical Skills:

CIVA Software:

Advanced knowledge of CIVA software fNDT simulation and modeling.

SolidWorks and AutoCAD:

Proficient in SolidWorks formechanical design and AutoCAD for technical drawing.

Programming Skills:

Experienced in programmingultrasonic testing equipment, including creating customscripts and automation solutions.

4.Personal Qualities:

Initiative and Hardworking:

Self-driven with a strong wethic, capable of working independently and managing pressures.

Analytical Skills:

Excellent analytical and problem-solviabilities, with a keen eye for detail and precision.

5.Consulting and Solutions:

Offer expert consulting services to addresscomplex NDT challenges, providing tailored solutions baon client requirements and industry standards.

Problem Solving:

Analyze and resolve technical issuesrelated to NDT processes, equipment, and systemintegration.

6.Travel Requirements:

Regional Travel:

Travel to various international locationincluding the Middle East (Saudi Arabia, UAE, Oman, Qaand Asia (Singapore, Malaysia, Indonesia, Thailand,Bangladesh, India) for project assignments.

Adaptability:

Adapt to diverse working environments,including offshore and onshore sites, and handle projecdemands with flexibility.

Application Instructions:

Interested candidates should submit a detailed resume outlitheir qualifications, experience, and relevant certifications.

Please include a cover letter addressing how your skills andexperiences align with the responsibilities and requirementsoutlined above.

Responsibilities:

• Arranges necessary facilities and instruments for jobs such as meters, test kits, temporary preparations, shore generators, and load banks
• Performs testing and commissioning activities and ensures that proper documentations are approved and signed
• Supervises and deploys manpower to execute the operational tasks
• Ensures that electrical equipment and switchboards meet the purchase specifications, and arranges for protection and maintenance of the electrical system
• Reviews commissioning work processes to enhance efficiency and productivity
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department and vendors
• Plans and schedules the testing and commissioning requirements based on project basis, and organises all logistics requirements for major operations
• Performs any other assigned duties and responsibilities

Requirement

• Diploma in Electrical Engineering or related Engineering Disciplines
• Min. 4 years of related work experience working on FPSOs
• Possess working experience related to testing of LV/ MV Switchboards, power generators, DCS / ICSS interface for PMS system
• Capable of testing and calibration of Electrical switchboard and its components, troubleshooting and clear understanding of system specification and class requirements
• Familiar with the testing procedures and applicable rules and regulations of regulatory bodies
• Familiar with test memos and manuals

Our Addresses:

Seatrium - Admiralty Yard

Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Seatrium Limited - Tuas Yard

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Our Working Hours:

Mon - Thu: 8:00 am - 5:15 pm

Fri: 8:00 am - 4:30 pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

OB DESCRIPTION

Job Title

Quality & HSE Engineer

Occupation

QUALITY CONTROL ENGINEER

Job Description & Requirements

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Purpose:

Responsible for performing the final inspection of assembly products to meet Customer's quality standards.

Key Area of Responsibilities:

· Perform In-process and Final Inspection for assembly tools and loose assembly modules to meet the requirement as defined on drawing, WI and any related documents.

· Initiate Material Review Board (MRB) review when part or assembly is not according to requirement as defined on drawing, WI and any related documents during in-process inspection.

· Update outgoing inspection record after Final Inspection to allow monitoring of the internal quality.

· Raise Non-Conformance Report (NCR) for non-conformance found to ensure reject is recorded.

· Support and participate in company continuous improvement program.

Qualification & Experiences:

· Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course

· Preferably with Workplace safety & health in Metal work certification

· Knowledge on quality inspection and buyoff

· No experience are welcome

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule