Under strict supervision, conducts tests on materials, components, subassemblies, and tools. Acquire basic knowledge of test procedures and techniques. Documents test procedures, data, observations, and results. Assemble components for prototype tools and for tests. Acquire basic knowledge of assembly tools and techniques. Documents assembly procedures and techniques. Learns and applies company sanctioned standards and specifications. Acquire basic knowledge of materials, components, and their application. Incorporate Reliability, HSE and Quality analysis techniques in all job processes. Error is readily ascertainable by the supervisor and can be corrected in relatively short time frames. Entry level position, no experience required.

Senior E&I Technician (WDA)

• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on the Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.

WHAT YOU WILL DO

Responsibilities include, but are not limited to:

• Provides support to complete work activities timely, efficiently, and satisfactorily.
• Apply Safety requirements in all aspect of day to day work.
• Follow up and continue with the previous shift or day incomplete work.
• Provides simple troubleshooting and diagnostic of equipment failure to determine the root cause and perform immediate corrective actions. Use Root cause analysis method for difficult or complex problem.
• Standby for any emergency repair after office hours / weekends and public holidays.
• Provide regular communication to stakeholders like operations and maintenance teams about equipment status.
• Maintain utility equipment like Chiller, Cooling tower, cold rooms, air compressors efficiently and reliably and to support production activities.
• Knowledge in instruments like temperature, Humidity sensors calibration.
• Maintain facilities in upright condition.
• Provide response to Alarms from utility equipment timely.
• Any other duties as and when assigned by the Supervisor / Manager

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• NTC / ITC / Diploma in Electrical Engineering or Mechanical Engineering or Instrument & Control engineering or its equivalent
• 3 - 5 years of working experience in Utilities and Facilities or electrical/instrumentation field in the Petrochemical or Chemical or Oil & Gas or other related industries
• Simple report writing skills

Preferred qualifications:

• EMA electrician’s license will be an advantage.
• Knowledge of cGMP and good documentation practice will be an advantage.

We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another’s thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace

Job Summary: The IT Operation and Maintenance Director is a senior leadership role responsible for overseeing, strategizing, and managing the operation, maintenance, and support of an organization's IT infrastructure, systems, and services. This position plays a pivotal role in ensuring the reliability, availability, and optimal performance of IT assets, while also providing leadership for the IT support functions. The IT Operation and Maintenance Director typically reports to the Chief Information Officer (CIO) or Chief Technology Officer (CTO).

Key Responsibilities:

1. Strategic Planning:Develop and implement long-term strategies for IT operation and maintenance that align with the organization's overall business objectives.
   Establish and manage budgets, resource allocation, and performance goals for IT operation and maintenance.
2. Operation and Maintenance:Oversee the daily operation, maintenance, and performance monitoring of IT systems, networks, data centers, and other infrastructure components.
   Ensure the highest level of system availability and performance while minimizing downtime and disruptions.
3. Team Leadership:Lead and manage the IT operation and maintenance teams, which may include system administrators, network engineers, helpdesk/support staff, and other IT professionals.
   Recruit, mentor, train, and evaluate team members to maintain a high-performing and collaborative workforce.
4. Problem Resolution:Identify and resolve complex IT issues, incidents, and service disruptions through effective incident management and problem-solving processes.
   Implement efficient troubleshooting and escalation procedures.
5. Asset Management:Manage IT assets, including hardware, software, licenses, and contracts.
   Maintain accurate inventories, ensure compliance with licensing agreements, and optimize asset utilization.
6. Security and Compliance:Establish and enforce IT security policies, procedures, and best practices to safeguard data and systems.
   Ensure compliance with relevant industry regulations and standards, and manage security audits and assessments.
7. Disaster Recovery and Business Continuity:Develop and maintain robust disaster recovery and business continuity plans to protect against data loss and ensure the continuity of critical operations.
   Regularly test and update these plans to accommodate changes in the IT environment.
8. Vendor and Supplier Management:Manage relationships with IT vendors, service providers, and suppliers.
   Negotiate contracts and service-level agreements (SLAs), ensuring adherence to agreed-upon terms and high service quality.
9. Performance Monitoring:Implement comprehensive performance monitoring and reporting tools to proactively detect and address performance issues.
   Analyze performance metrics and recommend improvements to enhance system and network performance.
10. Documentation and Knowledge Sharing:

• Maintain accurate and up-to-date documentation of IT systems, configurations, and procedures.
• Develop operational manuals and encourage knowledge sharing within the team to enhance operational efficiency.

Requirements:

1. Education: A bachelor's degree in computer science, information technology, or a related field is typically required. A master's degree or relevant certifications (e.g., ITIL, CISSP) may be preferred.
2. Experience: A minimum of 10-15 years of experience in IT operations and maintenance, with at least 5-7 years in a leadership or directorial role, is typically required.
3. Technical Knowledge: Proficiency in IT infrastructure, network administration, system management, and security best practices. Familiarity with the organization's specific technology stack is a significant advantage.
4. Leadership and Communication: Strong leadership, team management, and communication skills are essential for effectively leading diverse IT teams and collaborating with various stakeholders.
5. Problem-Solving and Strategic Thinking: Strong analytical and problem-solving abilities to address complex IT issues and make strategic decisions that align with organizational goals.
6. Regulatory Knowledge: Understanding of relevant industry regulations, compliance requirements, and the ability to implement and maintain compliance measures.
7. Project Management: Proficiency in project management methodologies and tools is essential for ensuring the successful delivery of IT infrastructure projects.

The IT Operation and Maintenance Director plays a critical role in maintaining the integrity and reliability of an organization's IT infrastructure. Their strategic vision, leadership, and operational expertise are vital for ensuring the consistent availability, security, and performance

Job Summary: The IT Operation and Maintenance Manager is a critical role responsible for overseeing the ongoing operation, maintenance, and support of an organization's IT infrastructure and systems. This position plays a crucial role in ensuring the reliability, security, and performance of IT assets and services. The IT Operation and Maintenance Manager typically reports to the IT Director or Chief Information Officer (CIO).

Key Responsibilities:

1. Operation and Maintenance:Manage the day-to-day operation, maintenance, and monitoring of IT systems, networks, and infrastructure.
   Ensure that IT systems and services are available and performing optimally, minimizing downtime and disruptions.
2. Team Management:Lead and supervise the IT operation and maintenance team, including system administrators, network engineers, and support staff.
   Recruit, train, and evaluate team members to maintain a high-performing and cohesive workforce.
3. Problem Resolution:Identify and resolve IT issues and incidents promptly to minimize impact on business operations.
   Implement effective incident management and problem-solving processes.
4. Asset Management:Manage IT assets, including hardware, software, licenses, and contracts.
   Ensure accurate inventory and licensing compliance while optimizing asset utilization.
5. Security and Compliance:Implement and enforce IT security policies, procedures, and best practices.
   Ensure compliance with relevant industry regulations and standards, and manage security audits and assessments.
6. Disaster Recovery and Business Continuity:Develop and maintain disaster recovery and business continuity plans to safeguard against data loss and ensure continuity of operations.
   Conduct regular testing and updates of these plans.
7. Vendor and Supplier Management:Manage relationships with IT vendors, service providers, and suppliers.
   Negotiate contracts, service-level agreements (SLAs), and ensure service quality.
8. Performance Monitoring:Implement monitoring and reporting tools to proactively detect and resolve performance issues.
   Analyze performance metrics and recommend improvements.
9. Documentation:Maintain accurate and up-to-date documentation of IT systems, configurations, and procedures.
   Create operational manuals for team reference.

Requirements:

1. Education: A bachelor's degree in computer science, information technology, or a related field is typically required. A master's degree or relevant certifications (e.g., ITIL, CISSP) may be preferred.
2. Experience: A minimum of 5-7 years of experience in IT operations and maintenance, with at least 2-3 years in a management or supervisory role, is usually required.
3. Technical Knowledge: Proficiency in IT infrastructure, network administration, system management, and security best practices. Familiarity with the organization's specific technology stack is a plus.
4. Leadership Skills: Strong leadership and team management skills, with the ability to motivate and lead a diverse IT team.

1. Oversee functions and activities of daily facility management (including the safe and efficient functioning, maintenance, servicing and operation of facility/equipment/machinery and systems).

2. Conduct facility/equipment inspections, facility/equipment system data collection/analysis, carry out risk assessments, implement necessary mitigation measures, and inform the operations team in time if the system is not optimal.

3. Maintain necessary maintenance policies including preventive maintenance program of the facility and its systems and facility-embedded equipment such as autoclaves, fire suppression system, steam generator, pest control, security services and systems, Building Management System (BMS), gas cylinders/pipelines, ACMV/HVAC, chillers, UPS, generator, etc.

4. Respond appropriately to emergencies (utility breakdown/fire/security breaching) as they arise, participate in 24-hour emergency response activities.

5. Manage new production line and machinery set up and/or upgrading work to existing production line.

6. To carry out the maintenance schedule outlined in the HACCP manual.

7. To maintain the machinery storage area and machinery not in use.

8. To observe hygiene condition of the premises at all time.

9. To observe safety and health procedures as well as security measures are all times.

10. Any other work shall be assigned by the Senior Engineer from time to time.

11. Able to work independently.

Provide technical support to daily plant operations to ensure safety and efficiency.

Perform regular and ad-hoc maintenances of production facility.

Implement process improvements to improve production safety and quality.

Work in compliance with safety and environmental standards.

Promote production safety by enforcing security procedures and hazardous controls.

Attend to equipment repairs and problems promptly.

Perform routine inspections to identify any malfunctions and replacements.

Monitor production operations to identify dangerous and hazardous conditions.

Maintain the work area safe, clean and organized.

Provide cost-effective solutions for optimal production operations.

Analyze and diagnose production problems in a timely manner.

Maintain complete documentations of production maintenance and repair works.

Ensure safe, smooth and uninterruptable plant operations.

Plant Operation

Support plant goals and objectives to achieve overall site KPI’s.

・Comply safety guidelines, SOP, policies and standards.

・Intergrade safety to all part of work and provide safety suggestions and improvements.

・Timely inform all unsafe activities, environmental release etc.

・Support shift activities includes but not limited to operation, frontline maintenance, plant start-up & shutdown and any other ad-hoc and urgent calls.

・Monitor and Operate Incinerators, boilers, turbine/generators and auxiliary systems includes but not limited to feed water treatment plant (Demin), compressed air system, fuel oil system, NH3 System, potable, rain and waste water systems etc.

・Perform shift logging and ensure equipment’s are operating within safe operating limits.

・Inform plant safety and other abnormal events timely.

・Involve in equipment/system isolation & normalization as part of plant activities.

・Respond to CCR alarms and perform frontline troubleshooting. Unresolved items raise maintenance notifications.

・Perform water sampling and ensure chemical injection system functionality as intended.

・Receive operation related chemicals, Lime, Fuel oil, NH3 etc.

・To assist operation & maintenance engineer in fulfilling their responsibilities.

・Carry out plant improvement activities.

・Maintain proper housekeeping as well as tidiness of work areas.

・To carry out any other duties as assigned by O&M Team.

・Oversee and handle maintenance activities as assigned during overhaul.

・Oversee and supervise external contractors.

Plant Optimization

· Identify safety improvement and implement energy & water saving initiatives.

· Assist maintenance team during maintenance.

· Monitor and keep track of utilities consumptions and generate reports as and when required

· Involve in Facilitate project works as well as plant improvement activities.

· Suggest and execute plant improvements initiatives.

Requirements

· NITEC / Diploma in Mechanical / Electrical / Industrial.

· Emergency Response Trained & First Aid trained.

· Confined space trained.

· Work at height trained.

Job Description:

• Main role to perform maintenance and repair on buses
• Carry out component repair when needed
• Diagnose malfunctions in defective parts by using diagnostic tool to determine the problems from various parts of the buses, including but not limited to, to ensure that they are in proper and safe working condition to operate effectively

- Brake and drive systems

- Battery system

- Pneumatic system

- Air-con system

• Must ensure high standard of workmanship and minimize turnaround time for repairs and inspections to meet workshop’s service standards and according to job order.
• Adhere to defined guidelines in regard to safety, orderliness and etc.

Job Requirements:

• Applicants with NITEC in Automotive Technology (Heavy Vehicles)
• Higher Nitec or Nitec in Automotive Technology, Mechanical, Electrical or Electronics.
• Minimum 1 to 2 years relevant experience in a similar industry
• Candidates must be sound in basic automotive skillset.
• Have knowledge of handling diagnostic tools, interpret and solve fault codes.
• Preferably with Class 4 Driving License
• Team Player
• Details oriented
• Able to work in fast-paced working environment
• Salary commensurate with experience

• Location: Penjuru Place, Jurong East
• Company bus pick-up provided at MRT Jurong East, West Gate
• Competitive base salary + OT + 1 month fixed bonus, medical & insurance
• Comfortable working at night during peak season/ when required due to critical issues

The Maintenance Technician will carry out all planned and unplanned maintenance activities across mechanical & electrical equipment to ensure minimal disruption to the manufacturing process.

Job Responsibilities:

• Execute responsive, preventative and predictive maintenance requirements to all machines/equipment in the Well screen Technologies facility to ensure maximum production levels.
• To perform day to day activities in accordance with the planned maintenance program.
• Carry out daily inspections of all the Well screen Technologies ancillary equipment.
• Maintaining all High and Ultra High Pressure pumps, water chillers, booster pumps, water treatment, slotting machines, weave and plate machines, laser and abrasive removal system as per the maintenance schedule or as required.
• Carrying out upgrades to equipment as and when planned in accordance with safe working practice.

Job Requirement:

• Comfortable working at night/ running night shift during peak season/ as & when required due to critical issues
• working 5 days/ week + OT
• Comfortable working at Penjuru Pl, Jurong East.
• Min 2 years of experience with manufacturing & maintenance background
• Strong mechanical knowledge in pumps, motors, centrifugal, and double diaphragm pumps.
• Basic electrical & electronic knowledge & experience
• Willingness in supporting facility maintenance around 5-10% basis.

Responsibilities:

1. Assist in project management and co-ordinate with in-house developer, vendor, customer and business stakeholders to ensure projects meet project scope, budget and schedule with proper project plan
2. Translate requirement from business unit to applications
3. Analyze user's requirements, feasibility, cost, time and resources required, compatibility with current systems, potential problem area and recommending solutions for projects
4. Responsible for the maintenance of application changes request
5. Provide application support, including but not limited to conducting training to users, application server maintenance, data analysis
6. Responsible for creation of all system documentations, and to ensure that they are kept up to date.
7. Work closely with external vendors and internal uses in the development/support of the new system

Job Requirements:

1. Diploma/Degree in relevant discipline or relatable working experience in IT field
2. At least 4+ years of working experience in participation of business application development, technical and business analysis
3. Understanding of Software Development Life Cycle (SDLC)
4. Application/Software design, development, integration, testing experience
5. Facilitation, negotiation and conflict resolution skills and demonstrated success at building teams and relationships with key stake holder in a project
6. Strong written and verbal communication skills
7. Analytical skills and attentive to details
8. Able to work independently without supervision
9. Liaising work and vendor/client management

Others Information:

1. 5-days work week
2. Meal allowance
3. Medical, dental & insurance benefits
4. Company Transport: 2 ways from Jurong East

Responsibilities:

• Provide first level end user support including troubleshooting, escalation of the issues to vendors, applying upgrade/patches to Desktop/Laptop, software, and hardware installation.
• Provide support for M365, Intune and Sharepoint is must.
• Manage user accounts, permissions, and access right to file server and Sharepoint. Procurement of IT equipment for end users
• IT asset inventory
• Ensure compliance with IT security standards, policies, and procedures.
• Oversee the daily running of the IT department ensuring that all systems are functioning properly.
• Setup, installation and deploying of computer.
• Ensure proper documentation of all IT infrastructure setup, software licenses and any software modifications.
• Site office visit.
• Other ad doc tasks and projects as needed.

Requirements:

• Minimum 3 years of experience in IT Engineer.
• Working experience in M365 and Sharepoint Creation/Migration is must.
• Able to read and write a simple scripting.
• Hands-on software and hardware troubleshooting experience
• Able to work independently with minimum supervision.
• Ability to multi-task, take initiative and manage priorities.
• Basic dynamic knowledge

Location: Lakeside

QC Technician

Responsibilities

•Responsible for quality control by following ISO 9001 quality system procedures and support to meet quality objectives.

•perform incoming, in-process, outgoing inspection and testing bu following work instructions and procedures.

•Record and update accurate data in system.

•Support engineers in troubleshooting and investigation on failure products.

•Support and work with production to resolve technical and quality issues.

•Feedback to engineers on inspection and quality issues.

•Issue NCMR in system and communication to production.

•Responsble for 5S housekeeping.

•Participate in 6S and continious improvement program.

•Performs other duties and assumes accountabilities as a apparent or as delegated, inclauding mutually agreed upon objectives.

Knowledge skills and abilities

•Able to read technical drawings

•Good interpersonal skills and able to work as a team

•Meticulous and paying attention to details

•Able to use Basic Micosoft excel

•Understand GD& T is a plus

•Basic knowledge and understanding in conducting a RCA is a plus.

Experience

•At least 2 years QC or quality related experience , preferred familiar with ISO 9001.

•Experience in using basic measuring equipments such as calipers and height gauges is preferred.

•Able to read and interpret electrical schematic diagrams will be a plus.

•Able to use CMM will be a plus.

Description

5-10 years’ Experience in Cnc Turning with Master Cam/UG Programming

2D & 3D Programme with Designing Knowledge

Multi task work

Need to operate CNC Milling and CNC Turning Machine

Need to work Night shift

Need operate the Conventional Machines when it is necessary

Requirements

Diploma/ITE Singapore

5-10 Years Experence in Precision /OIl & Gas Experience

SINGAPOREAN ONLY

Contact Ravi +65 90627715 (WhatsApp)

Mom Lic No-08C4221 (Reg No-R1102427)

Job Description & Requirements

• Design, improve and oversee the entire technological infrastructure of the crypto exchange.
• Timely fix critical technical issues that would otherwise be detrimental to the organization.
• Make architecture decisions to ensure a strong, stable, and scalable product
• Be in charge of deploying and then maintaining the entire exchange from pre-purchased source code.
• Modify and improve the source code to add new or customized features/functions.
• Leading the development of new products, transforming ideas to logic to code, then being in charge of deployment and testing of the new product, and doing everything in between.
• Supervise, test, and audit system infrastructure and all deployed code, to ensure bug-free functionality, efficiency, and most importantly, cybersecurity.
• Manage all front & back-end development or improvement,
• Work with our product/UI/UX team to constantly improve UI/UX with customer feedback and results from split testing
• Be in charge of building and managing a team of high-quality developers.
• Documenting and improving the company’s technical systems, processes, and procedures
• Researching and implementing new technologies that would benefit the organizationtion.
• Constantly trying to automate manual processes within the organization.
• Review and deploy all money-sensitive code into our production server to ensure utmost cybersecurity and no fraudulent loopholes to access funds that hired developers may put into the code.

Requirements

• Minimum 3 years of blockchain experience.
• Minimum 5 years of experience with any 2 of the following languages with the ability and willingness to learn new languages: Java, Golang, RUST.
• At least 1-year experience of working crypto exchanges OR 1 year of experience running traditional trading systems or forex/equity exchanges
• Ability to conduct technological analyses and research
• Strong interpersonal skills and the ability to share/collaborate with peers
• Ability to hire and manage large technical teams, both front end, and back end, managing applications in all platforms including Web, Android, iOS, Mac, Windows,etc.
• Ability to write, audit and deploy code, and set up proper processes for other people to do this with utmost cybersecurity
• Cybersecurity: Have a strong understanding of crypto-related cybersecurity.
• Creativity: think outside the box and deliver innovative and original solutions
• Tenacious: show determination to succeed and the drive to deliver outstanding results
• Result focused: set performance targets that are ambitious yet realistic and measurable, and manage their achievement in a structured way
• Highest standards: Exceeding expectations is not enough. The CTO needs to know how to supersede even the highest of standards.

Enjoy great career development opportunities in a fast growing company We regret to inform that only the successful candidates will be notified.

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Reading repair manuals and liaising with other professionals.
• Running tests and interpreting results to make effective recommendations.
• Writing up reports, safety regulations, and preventative maintenance plans.
• Sourcing replacement parts.
• Negotiating with suppliers and clients.
• Repairing or replacing faulty equipment.
• Fabricating any components required.
• Providing time and material cost estimates before starting a job.
• Keeping abreast of advancements in your field and attending workshops as required.

Technician Requirements:

• High school diploma.
• A relevant degree, certification, or license may be required.
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.

Job Title: Electrical/Mechanical Technician (FCMS)

Location: Tampines

Working Days: 4-3-3-4

Working Hours : 8am to 8pm or 8pm - 8am

Basic Salary: Up to $3500

Benefits: AWS, Quarterly Bonus, Annual Leave, Company Transport

Responsibilities

• Carry out maintenance activities for facilities systems incl. cooling / heating, compressed air, vacuum systems, cleanroom and non-cleanroom ACMV system and equipment, etc
• Support engineers for operational support, trouble-shooting and problem solving
• Follow up and coordinate internal and external activities when required

Requirements

• NITEC or Diploma in mechanical or electrical
• Minimum 2 years experience in manufacturing industries
• Familiar with cleanroom operation and general facilities systems preferred

WONG MENG KANG

SuperformConsulting Pte Ltd

R1988500/15C7536

• To support and maintain the ASRS (Automation Storage and Retrieve System) and its equipment for the logistics operations.
• To carry out continuous improvement to eliminate the ASRS and its equipment breakdown.
• To carry out planned maintenance of the ASRS and its equipment as per scheduled.
• To carry out routine checks to ensure the smooth operation of ASRS system.
• Carry out repair and troubleshooting of equipment breakdown.
• To maintain correct spare parts safety stock and replenishment.
• Any other duties as assigned by the Superior from time to time.

Requirements

• Diploma in Mechanical and Electrical Engineering or relevant certification from recognized institutions.
• Proficiency in MS Office (Excel and Words)
• Familiar with AC installation up to 400/480 volt and DC up to 24 volt.
• Familiar with wiring diagrams, symbols, and electrical measuring.
• Familiar with electrical/mechanical drive technology (e.g. motors and gears).
• Familiar control technology (e.g. controls/inverter).
• Forklift license will be an added advantage.
• Good working attitude, teamwork oriented and ability to learn new tasks.
• Must be able to work at heights exceeding 40 meter.
• Must be able to work on rotating shifts.

1. Carryout structural repair & modification of electro-hydraulic driven machinery locally as well as in the region.
2. Carryout mechanical & hydraulic dismantling & assembly works.
3. GCE ‘N’ level, ITE in Fabrication Technology with 3 to 5 years’ experience.
4. Willing to travel when required and situation permits.
5. Possess Class 3 driving license.
6. The position is based in Singapore, overseas travel will be required.

Our Client is a Multinational Information Technology and Electronic company. With their expansion plan, they are looking for IT Support Engineers.

The Role:

• Support the project teams in the implementation, installation and configuration of PCs / Workstations O.S., applications and related peripheral devices.
• Provide 1st level on-site IT support to the end-users on 8 hours shift including Public Holidays.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• The Support Engineer will report to the Project Manager.
• Experience in installation, configuration, troubleshooting of PC / peripheral devices and application maintenance support will be required.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required

• Shiftwork (Monday - Sunday):
• Day shift: 7 a.m. - 3 p.m.
• Night shift: 3 pm - 11 p.m.
• Successful applicants should be prepared to be deployed primarily at Tanah Merah, Harbourfront and Marina Bay. The also could be deployed in future on a rotational basis;
• Certificate in Higher Nitec or Diploma, ideally with a focus / specialization in IT;
• Having prior exposure to IT operational environments;
• Communicate well and has good interpersonal skills;
• Independent and has ownership of assigned tasks.

Salary package additions:

• Annual Performance Bonus
• Monthly Shift Allowance
• Monthly Transport Allowance
• Monthly Phone Allowance
• Attendance Allowance

Duties & Responsibilities

• Support end-user hardware and software deployment
• Provides support and troubleshooting for end-user incidentals
• Liaising with outsource services provider in resolving issues when required
• Support and maintain office IT assets and documentation
• Monitoring and maintaining office network and data backup and recovery
• Liaising with vendors in sourcing and purchasing or IT requirements
• Support user account maintenance for ERP system
• Help to setup or troubleshoot and resolve online meeting incidentals
• Maintain company website and email accounts
• Support branch office IT counterpart when necessary
• Any other relevant job scope assigned

Requirements

• MCandidate must possess at least Degree in Computer Science/Information Technology or equivalent.
• Minimum 1 year experience as an IT administrator cum Software developer
• Must be knowledgeable in server virtualization
• Linux and Window Server deployment, configuration, and patching
• Proficiency in Office 365, Microsoft Team and perpetual Microsoft Office
• Knowledgeable in VBScript for Excel and Power BI
• Proficiency in maintaining Network switches and Firewall
• Database optimization and performance tuning
• Good interpersonal and communication skills

Duties and Responsibilities

· Perform commissioning activities, such as Electrical functional tests, dynamic commissioning, completion of functional checks, and complete mark up on as-built drawings.

· Assist VENDOR’s Engineer in commissioning VENDOR’s packages.

· Carry out housekeeping and maintenance of tools and test equipment.

· Carry out the preservation of equipment.

Functional Interfaces

· CONTRACTOR’s Discipline Supervisors

· CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

Profile Requirements

· Qualification: Diploma in Engineering/ Singapore Technical Certificate/ National Trade Certificate/ Skill

You will be working in Nippon Sanso Holdings Singapore company, part of the Nippon Sanso Holdings Group. You will be reporting to the regional SEA+I IT & IS Senior Manager.

You will be responsible for design, deployment, and management of our SEA+I Hybrid Infrastructure Services, which includes both regional cloud and local on-premises environments.

You will be the technology leader who can deliver scalability, reliability and availability of our infrastructure across multiple platforms to support our regional business.

You will work with local IT teams across SEA+I to manage and optimize their on-prem environment.

Key Responsibilities

• Manage and administer hybrid cloud and on-premises infrastructure, ensuring high availability, scalability, and performance.
• Lead regional and local IT Infrastructure projects. Bring together external and internal
• Implement and maintain security measures, including access controls, encryption, and vulnerability management, for hybrid cloud and on-premises environments.
• Collaborate with cross-functional teams to define and implement infrastructure strategies, taking into consideration hybrid cloud and on-premises components.
• Work closely with vendors and service providers to effectively manage the infrastructure, ensuring compliance with service level agreements (SLAs) and resolving any issues or escalations.
• Plan and execute infrastructure changes and upgrades, while minimizing disruption to business operations.
• Stay up-to-date with emerging technologies, trends, and best practices related to hybrid cloud and on-premises infrastructure, and propose and implement improvements accordingly.
• Provide technical guidance and support to team members and other stakeholders on infrastructure-related matters.
• Provides regular reports on Service level attainment and other KPIs in accordance to corporate regulatory and compliance requirements.
• Develop and maintain documentation, including infrastructure architectures, procedures, and troubleshooting steps.

General Requirements

• Over 10 years experience in general IT and more than 5 years experience in a regional infrastructure management role
• Demonstrated experience in the planning, design and implementation of hybrid cloud and on-premises infrastructure architecture and security
• Experience in general IT governance (organizational management, technology evaluation, vendors management, program planning, etc.)
• Project Management and decentralized team coordination experience
• Familiar with enterprise infrastructure and networking solutions, able to review technical details with the team to identify potential improvements
• Have a good technical understanding of advanced network security concepts and identity & access management solutions
• Relevant certifications (e.g. Microsoft 365 Enterprise Administrator Expert, Certified Azure Solutions Architect, Fortinet NSE, …) are a plus
• Fluent in English, both spoken and written (C1 English level)
• Bachelor or Master degree (Computer Science) or equivalent through experience
• Flexibility to travel (20% travel)

The Role

Working with an industry market leader and alongside a highly dedicated team, the Field Service Technician will report to the Service Manager and Field Service Manager. The role will provide strong technical and maintenance support for our customers by performing planned maintenance or non-scheduled repairs in a professional manner for mechanical battery electric and internal combustion lift trucks.

Scope of Responsibilities:

• Report to the Service Manager and Field Service Manager regarding on-site repairs and/or maintenance calls and update daily on-site job cards.
• Complete a minimum average number of site calls per day.
• Coordinate with customers on site arrival, departure, truck service availability, and ensure that lift trucks are operating well before leaving the site; ensure that necessary work are completed satisfactorily before seeking customers' acknowledgement on the service job cards.
• Maintain an accurate record of all travel and worked hours for each job using the assigned tablets.
• Maintain the service van condition according to Company standards and ensure scheduled maintenance is carried out on the service van.
• Maintain tools and equipment according to the company standard and report any breakages or loss of tools promptly.
• Replenish and maintain service van inventory to the specific and appropriate levels.
• Participate in and conduct an accurate count during a van stock-take and provide accurate daily cycle count data.
• Ensure that on-site work safety requirements are complied with at all times.
• Understand daily work targets, completed jobs and/or sales of parts.
• Assist in ad-hoc projects or training matrix evaluations, when necessary.
• Perform a reasonable amount of overtime work to support business/customers' needs, when necessary.

The Right Fit:

• Nitec/NTC-2/3 or equivalent in Electrical or Mechatronics Engineering studies
• At least 2 years of working experience in maintenance repair and overhaul in industrial machinery or material handling equipment (lift trucks)
• Good working knowledge in electrical/mechanical aptitude or electro-hydraulic equipment will be advantageous.
• Experienced in customer service will be advantageous.
• Possess strong communication skills and proactiveness to resolve technical issues.
• Must hold a valid Class 3 driving license to drive the assigned service van for field work. Candidates with no driving license will be considered for workshop technician positions.

This position is based at our Branch office located at 15 Tuas Avenue 8, Singapore 639230.

If you are looking for an opportunity to develop a career in a challenging and fast-paced environment with a global market-leading company, please send in your resume today!

1. Carryout equipment commissioning, servicing, and repair of electro-hydraulic driven machinery locally as well as in the region.
2. GCE ‘N’ level, ITE in Electrical or Mechatronics Engineering with 3 to 5 years’ experience working with electrical / electronic systems in port handling or similar equipment.
3. Possess Class 3 driving license.
4. The position is based in Singapore, overseas travel will be required.

JOB SCOPE

Carry out pre-delivery inspection, testing, installation & commissioning, repairs and servicing works for products handled by the company at company's premise or at customer's site. Carry out electrical, mechanical and hydraulic fault diagnosing and repairs for all products handled by the company.

JOB RESPONSIBILITIES

• Carry out pre-delivery inspecton, testing & commissioning, repairs and servicing works for products handled by the company at company's premise or at customer's site.
• Carry out electrical, mechanical and hydraulic fault diagnosing and repairs for all products handled by the company.
• Complete service report including cause(s) of problems, details and detailed parts used for every job completed timely and submit daily with time sheet to the respective supervisor/service engineer.
• Complete daily time sheet and submit daily to the respective supervisor/service engineer.
• Perform installation of attachment according to job specification and installation instruction at customer sites in Singapore.
• Perform retrofitting and modification task and ensure the completed task is compliance with the drawing and instruction provided.
• To handle welding works.
• Handle material preparation for stock like shaft, mounting bracket, manifold block, fitting and hose guide etc.
• Any other duties as assigned by the service management.