Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Job Description:

As a Diesel Engine Mechanic, you will be responsible for diagnosing, repairing, and maintaining diesel engines used in various Ships, vessels and tankers, excluding motor vehicles. Your expertise will be crucial in ensuring optimal performance and reliability of our equipment.

Key Responsibilities:

Perform routine maintenance and repairs on diesel engines, including overhauls and rebuilds.

Diagnose mechanical issues using diagnostic tools and equipment.

Read and interpret technical manuals, schematics, and blueprints.

Collaborate with team members to complete projects efficiently.

Maintain accurate records of repairs and maintenance activities.

Ensure compliance with safety standards and regulations.

Qualifications:

Proven experience as a Diesel Engine Mechanic (3+ years preferred) or Mechanic (Earth Moving Machinary)

Strong knowledge of diesel engine systems and components for ships, boats and vessels.

Proficiency in using diagnostic tools and equipment.

Ability to work independently and as part of a team.

Excellent problem-solving skills and attention to detail.

Relevant Trade certifications.

About MWC

Set up in 2009, Migrant Workers’ Centre (MWC) is a non-governmental organisation whose mission is to champion fair employment practices and the well-being of migrant workers in Singapore, by pursuing four main pillars: Fairness, Assistance, Integration, and Representation.

Find out more about MWC here: https://www.mwc.org.sg/

Responsibilities:

· Develop and manage marketing materials (collaterals) to effectively communicate product value to the Migrant Community

· Collaborate with external partners to manage and optimize recruitment touchpoints for Membership Services.

· Strategize to maximize recruitment efforts through partnerships, ensuring impactful engagement at various recruitment channels.

· Analyse data to inform marketing strategies and improve outreach effectiveness.

· Generate membership reports and statistics

· Support the administrative duties (procurement, correspondence, filing, records safekeeping; digitalization of records, etc)

· Any other adhoc project/tasks as assigned

Requirements:

• Diploma/Degree in Sales and Marketing preferred
• Strong understanding of data analysis to drive marketing efforts.
• Graphic design skills are preferred to enhance visual presentation of marketing materials
• Ability to converse and write in one of the migrant workers’ native languages will be a plus
• Customer-service oriented and enjoys meeting people
• Independent, self-motivated, with a desire to learn
• Proficient in Microsoft Office (especially Word, Excel and Powerpoint)
• Able to work on weekends and after office hours

Work Location:

This role is primarily based at Migrant Workers' Centre Recreation Club (MWCRC@SL) at 51 Soon Lee Road, Singapore 628088

Responsibilities

• Must have experience in aluminium & Glass industry work
• Able to work independently with Main Contractor, Architect to resolve site issues
• Prepare tender submission;handle progress claims and progress payment, VO & finalization of accounts
• To attend site meeting whenever is required
• Materials ordering for sites.
• Any ad-hoc duties assign.
• Estimate the overall cost of the project

Requirements:

• Degree/ Diploma in Building/Quantity Surveying
• At least 5 years QS experience in alum windows & doors
• Meticulous, Independent with good communication skills
• Proficient in AutoCAD and Microsoft Office programs (Excel, Word, e.g.)
• Familar with alum profiles
• Able to work under pressure and tight deadline;

• Manage and oversee the day-to-day construction management of the project and provide timely updates
• Responsible for all inspection activities
• Monitor and supervise entire project team to ensure compliance of work
• Check and monitor project budget, as well as prepare for unforeseen costs
• Manage material at construction site to ensure zero wastage and no overstock of material
• Manage manpower and overtime cost to ensure optimal cost benefit within or below budget
• Attend and/or chair meetings with clients, architects, engineers and workers
• Prepare regular progress reports for each project
• Ensure all changes to specifications, work scopes and drawings are properly documented

About Eco Harvest Pte Ltd:

Join our close-knit team where values like integrity, openness, and teamwork are at the heart of everything we do. At Eco Harvest , we foster a relaxed work environment with a strong focus on meeting clear standards and procedures without micromanagement. We specialize in providing essential supplies across food, spices, and chemical sectors for industrial and pest control applications.

Role Overview:

The Purchasing Executive at Eco Harvest will manage critical aspects of our supply chain, enhancing our procurement operations and maintaining effective supplier relationships. This role involves managing the entire procurement cycle, ensuring operational compliance, and collaborating across teams to meet business goals.

Responsibilities:

• Engage and negotiate with suppliers to secure favorable terms and manage contracts.

• Oversee inventory levels and manage all procurement documentation from initiation to reconciliation.

• Accurately maintain purchasing, sales, and petty cash records within our accounting system.

• Address customer delivery concerns and manage logistics to optimize delivery schedules.

• Adhere to and enforce company procurement policies, ensuring all activities are compliant.

• Track shipments and work with vendors to rectify any delivery issues or discrepancies.

• Work alongside various departments to guarantee timely and accurate delivery of products.

• Evaluate suppliers and contribute to the decision-making process for vendor selection.

• Monitor budgets and conduct cost analyses to identify financial optimization opportunities.

• Spearhead initiatives to streamline procurement processes for better efficiency and cost savings.

Qualifications:

• Minimum 2 years of experience in purchasing, procurement, or a similar field.

• Exceptional organizational skills with the ability to manage multiple tasks.

• Superior communication skills, both written and verbal.

• Proficiency in Microsoft Office; further training on company-specific purchasing software will be provided.

• Demonstrated ability to work both independently and within a team.

• Familiarity with current procurement practices and market trends.

Application Process:

If you are driven to excel in a dynamic role and contribute to a team where every member is valued, please apply by sending your resume and a personalized cover letter explaining why you are a great fit for Eco Harvest by emailing us

**Job Description:**

We are seeking a skilled Welder to join our team. The ideal candidate will have experience in various welding techniques and a strong attention to detail. performing welding tasks on ships, vessels and boats. You will be responsible for fabricating and repairing metal structures, ensuring high-quality standards and safety protocols on a marine environment.

**Key Responsibilities:**

- Perform welding tasks using MIG, TIG, and Stick welding techniques on vessels and ships.

- Read and interpret blueprints and technical drawings.

- Assemble and fabricate metal parts and structures.

- Conduct quality inspections on welded materials.

- Maintain a clean and safe working environment.

- Collaborate with team members to meet project deadlines.

**Qualifications:**

- Proven experience as a welder (4 years preferred).

- Trade Certification in welding is a plus.

- Proficient in reading blueprints and technical drawings.

- Strong attention to detail and quality control.

- Ability to work independently and as part of a team.

- Excellent communication and problem-solving skills.

We are an innovative education company looking for an Assistant Manager to join our team for managing the delivery of ongoing programs and help in the roll-out of new education programs. As a key person in the program management team, you will be responsible for managing a portfolio of education programs and ensuring that the programs are completed in budget and on-schedule.

This is a dynamic role and the responsibilities will include;

Managing Existing Programs

- Track program enrolment and assist with any queries related to the enrolment process.

- Assist with the booking of venues and facilities for the programs.

- Coordinate with various vendors for materials and supplies related to the program and ensure timely deliveries

- Oversee the program execution, including manage the temp staff hired during program execution.

- Analyse and present feedback data from the programs conducted.

Business Development for New Programs

- Work with the program design team to understand the details of program content and delivery methods.

- Develop information materials related to the programs.

- Conduct outreach activities for existing and new groups of clients (mainly education institutions).

The candidate attributes should include;

- Prior experience in managing events/programs or conferences.

- Good communication skills

- Good interpersonal skills

Education – Preferably a Diploma and above

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

MAIN RESPONSIBILITIES

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.

• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents, and site instructions.

• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Consultant / Qualified Person as stated below:

• Check shop drawings submitted by contractor.

• Check as-built drawings and Operation & Maintenance Manual submitted by contractor.

• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.

• To check mock-ups done on site, where necessary.

• To ensure that the required construction tests in connection with the construction works are carried out where necessary.

Requirements:

• Diploma in Mechanical or Electrical Engineering from a recognized tertiary institution or relevant qualifications.

* Minimum ten(10) years of relevant experience as a mechanical and electrical engineer, of which at least three (5) years shall be in supervision of works similar in nature to major construction works in buildings, plumbing/Sanitary Experiance.

*Experience in PUB project is advantageous.

Contract Period: 5 years

· Performing various skin treatments according to clients’ needs, such as facial/skin treatments.

· Scheduling client’s appointments

· Data entry of client's information

· Keep documentation and maintain client’s files

· Perform pre-treatment and after treatment consultation

· Acknowledge and respond to relevant client’s queries, needs and expectations

· Suggest and promote retail products or additional services

· Stock taking

· Ensure treatment rooms are clean and neat

· Any other administrative task when required

Job Responsibilities:

1. Handle customer complaints and quality related queries
2. Implement customer requirements, carry out product quality plan for all projects and ensure PQP effectiveness
3. Implement quality tools in production to support corrective and preventive actions and continuous improvement
4. Part and line approval follow up (Qualification Package) throughout the project
5. Supplier Quality Management
6. Handle quality issues and liaise with cross-functional team towards improvement
7. Ensure related documents are updated accordingly for lesson learnt and continuous improvement

Job Requirements:

• College degree of Science/ Engineering
• Experience in quality control and customer/supplier quality management
• Experience in incoming, manufacturing and customer service area
• Familiar with quality tools and have basic knowledge of six sigma
• Familiar with the knowledge of IATF 16949 standard and 5 Tools (PPAP/APQP/SPC/MSA/FMEA)
• Good inter-personal and presentation skill
• Self-motivated and good team player

Responsibilities:

• Responsible for 3D product design and its requirements
• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions
• Perform functional test evaluation, Design for assembly (DFA)
• Create proof of concepts
• Generate engineering drawing with proper GD&T and Tolerance Stack up
• Perform Patent search for possible design infringement
• Drive Projects with tight timeline

Requirements:

• Degree in Engineering (Mechanical / Industrial)
• 2-4 years of relevant experience
• Good exposure in Plastic Injection molded parts design
• Knowledge of product design, engineering plastics behavior, product certification
• Knowledge of CAE simulation will be an added advantage
• Competent in Engineering calculations
• Hands on 3D CAD & CAE experience
• Good problem solving skills with strong technical acumen

Job Description

• Perform Accounts Payable & Accounts Receivable functions, including data entry into the systems
• Check staff reimbursements, project petty cash claims and adhoc payments
• Ensure accurate project costing updates, verify interim valuation certificates, and allocate staff costs effectively within projects.
• Update related party transactions / balances
• Conduct monthly bank reconciliations
• Maintain full set of accounts and manage all financial and accounting transactions.
• Timely production of monthly management reporting package, including financial statements and relevant schedules.
• Prepare cash flow forecast, bank reconciliation and cash monitoring.
• ⁠Prepare quarterly GST reporting, reconciliation report and tax computation
• Involve in budgetary control, forecasting and other management accounting functions
• Assists in year-end audit.
• Other ad-hoc duties as assigned.

Requirements

• Diploma or Bachelor's degree in Finance, Accounting, or related field.
• At least 3 years of experience in finance operations, accounting, or related roles.
• Detail-oriented with a high level of accuracy and attention to detail.
• Self-motivated, with a positive learning attitude, able to work independently and proactively within a team
• Experience in project management will be an added advantage.
• Possess good interpersonal and communication skills.
• Willingness to continuously learn and improve professional skills
• Willingness to accept and support changes
• Meticulous and adept in working under pressure and tight timelines
• Hands-on bookkeeping is preferred.

CONSULTANT

JOB DESCRIPTION

You will lead the team in your specialty area and work closely with fellow healthcare professionals in providing holistic care to patients. In addition to patient care management, you are expected to provide guidance, teaching and training to all level of staff. You may also be involved in intra- and interdepartmental projects and committees and any other tasks as assigned by the Head of Department.

We have vacancies in the following disciplines:

Division of Medicine & Community Services

Cardiology

Internal Medicine

Infectious Disease

Rehabilitative Medicine

Rheumatology

Endocrinology

Gastroenterology

Geriatric Medicine

Palliative Medicine

Division of Ambulatory & Surgical Services

Anesthesia

Diagnostic Radiology

Ear, Nose, Throat (ENT)

Emergency Medicine

General Surgery

Intensive Care Medicine

Orthopaedic Surgery

Ophthalmology

Laboratory Medicine (Microbiology, Pathology, Histopathology)

REQUIREMENTS

• MBBS or equivalent and relevant postgraduate qualification (eg MRCP, MCEM, FRCS);
• Those with at least 2 years of specialist working experiences can apply as Consultant;
• Ability to work in a fast-paced environment and strong adaptability to changes;
• Strong command of spoken and written English;
• Registered (or meet registration criteria) as a Specialist with Singapore Medical Council

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

RESIDENT PHYSICIAN / SENIOR RESIDENT PHYSICIAN

JOB DESCRIPTION

You will be responsible for the total management of patients in the wards and outpatient clinic

under the supervision of a Consultant. You will also guide the Medical Officers, House Officers and medical students and take on any other tasks as assigned by the Head of Department. You will work alongside nursing, allied health and pharmacist colleagues in a team-based setting to provide comprehensive and holistic patient care.

We have vacancies in the following disciplines:

Division of Medicine & Community Services

Cardiology

Internal Medicine

Geriatric Medicine

Palliative Medicine

Community Hospital

Division of Ambulatory & Surgical Services

Anesthesia

Diagnostic Radiology

Ear, Nose, Throat (ENT)

Emergency Medicine

General Surgery

Intensive Care Medicine

Orthopaedic Surgery

Ophthalmology

REQUIREMENTS

MBBS or equivalent with at least 3 years experiences as Medical Officer;

Those with relevant postgraduate qualification (eg MRCP, MCEM, FRCS) will have an advantage;

Be in active clinical practice in the past 3 years in the selected discipline;

Ability to work in a fast-paced environment and strong adaptability to changes;

Strong command of spoken and written English;

Registered (or meet registration criteria) with Singapore Medical Council.

Please be informed that only applications submitted through NHG Career Webpage (corp.nhg.com.sg/Careers), WHC Career Webpage (whc.sg/joinus), JobStreet Singapore (jobstreet.com.sg), Singapore Medical Association (sma.org.sg), Singapore Nurses Association (sna.org.sg), MyCareersFuture.sg, LinkedIn and WHC appointed recruitment agencies will be considered. If you are accessing this job posting from another recruitment channel, please visit the official channels mentioned above.

Clinical Associate

You will provide clinical care / procedures to the patients under the supervision of senior doctors. You will be required to perform night duties and work on weekends/public holidays according to department roster. You will work alongside nursing, allied health and pharmacist colleagues in a team-based setting to provide comprehensive and holistic patient care.

We have vacancies in the following disciplines:

Medicine

Anaesthesia

Radiology

Otolaryngology (ENT)

Emergency Medicine

Surgery

Orthopaedic Surgery

Ophthalmology

REQUIREMENTS

• Basic medical qualification with at least 3 years’ post Housemanship working experiences;
• Those with relevant postgraduate qualification will have an advantage;
• Be in active clinical practice in the past 3 years in the relevant discipline;
• Able to work independently in a fast-paced environment with strong adaptability to changes;
• Strong command of spoken and written English;
• Registered (or meet registration criteria) with Singapore Medical Council.

• Position: Service Engineer (Crane/Heavy Equipment Industry)
• Location: Tuas (company transport provided)
• Working hours: Monday to Friday (8.30am - 4.30pm)
• Salary (commensurate with experience): Up to $4,000 + OT Payable + AWS + Performance Bonus + 14 Days Annual Leave + Transport Allowance + Meal Allowance
• Duration: Permanent
• Industry: Equipment & parts distributor (MNC)

Main Responsibilities:

• Product delivery training to distributors and customers
• Provide diagnosis guidance and analyzing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue
• Furnish warranty claims and quality report to drive quality improvement on our products
• Any other ad-hoc duties assigned

Requirements:

• Minimum Diploma in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess a valid Class 3 Driving License
• Will involve travelling to other countries within Asia, entitled to travelling allowance

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

1) Plan and coordinate, supervise, monitoring of works/ control worker/ allocate work to worker.

2) Coordinate /follow up schedule with Main contractor on our company scope of work eg, metal railing, metal grating , metal catladders/ Architectural works.

2) preparation of safety documents (Risk Assesment forms, MOS,etc)

3) prepared bill of quantities, liaised with fabrication team /coordinates with production to manufacture products on time/oversee for delivery to project site for installation.

4) conduct quality inspection on finished products.

5) Overall control onsite, checking and verifying drawings as per plan to actual/verify work on site as per approved drawing.

6) prepare progress billing report and quantity measurement on site for monthly progress claim purpose.

7) attend site meeting with main contractor / Architect/ consultant.

8) understand revit, BIM , Autocad will be advantage.

9) Able to understanding see drawing/plan/sectional.

10) skilled for able to solve site problem, skilled for can cooridinate with main contractor.

11) Assign work scope by company as and when.

12) Estimator skilled

Responsibilities:-

1. Prepare material requisition lists for job requirements.

2. Plan and design electrical switchboards, consoles and control panels according to customer's requirements and Terasaki standards.

3. Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shop floor production.

4. Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.

5. Feed back to Sales & Marketing Department on the changes of technical requirements by clients for claims of additional costs and time.

6. Check and follow-up on design and shop drawings with production departments.

7. Develop and improve on design of electrical switchboards, consoles and control panels. While taking note of quality, standard, cost effective designs are to be considered.

8. Assist and advise Sales & Marketing Department on technical matters, provide technical backup for securing of contracts.

9. Carry out other responsibilities as and when assigned by the superiors.

10. Follow the procedures of design control, documentation and data control, and quality system of the total Quality Management System.

Benefits

• Flexible working hours
• Work from home
• Uncapped earning

You will be expected to:

• Canvasing for new customer
• Account Management
• Prepare job ads to attract applicants
• Shortlist and Screening of candidates for interview.
• Coordinate interview arrangement and ensure candidates are well prepared.
• Ensure sales closures to achieve personal commission.

Requirements:

• Min Diploma qualification and above
• Able to work independently and remotely when required
• Certificate of Intermediaries License (CEI) is a MUST to be able to conduct EA work.
• Relevant experience in recruitment agencies is a MUST ( 2-3 years)

Interested parties who wished to apply for advertised role, please send your full resume to [email protected]

We regret that shortlisted candidate will only be notified.

Responsibilities

• Handle full sets of accounts - handle daily operational AP/ AR tasks including invoicing, payment, receipts, staff claims, and others
• Perform month-end and year-end closing of accounts for management reporting and statutory compliance
• Perform monthly reconciliation, Balance Sheet Schedules and reports
• Prepare quarterly GST reports
• Prepare audit schedules and liaise with the external auditor and tax agent
• Ensure timely and accurate recording of accounting entries into accounting system
• Maintain good documentation and filing system
• Perform any other ad-hoc duties assigned as and when required

Requirements

• Diploma in accounting or equivalent.
• CPA / ACCA or pursuing will be an advantage
• Min 5 years of relevant experience with hands-on experience with full-sets finance activities
• Excellent communication and interpersonal skills, ability to work in a highly collaborative work environment and is comfortable with matrix reporting
• High computer literacy, technically agile with numbers and is able to work independently
• Resilient, highly adaptable and able to multi-task in a fast-paced environment / high growth start-up

Location : Tuas Avenue 8

Work Hours : 8.30am - 5.30pm (Mon-Fri) 830am - 12.30pm (Sat)