1. Maintain and adjust the condition of electrical assets: Electrical Systems, Equipment, UPS Batteries, Generators

Switchboards, Motors, Wiring, Portable tools etc

• Comply with relevant authorisation procedures, safe working practices and specific instructions.
• Complete maintenance in an agreed timescale, using safe and appropriate methods and agreed procedures.
• Ensure resources and spares are planned for and used cost effectively.
• Ensure the correct, current operating requirements are available for reference.
• Ensure any assets which have been maintained or had parameters adjusted still comply with spec ified operating requirements with minimum disruption and with the specified methods, tools and materials.
• Monitor and record any maintenance or adjustments accurately in work history in MMS.

2. Monitor And Assess The Performance And Condition Of Electrical Assets

• Obtain information or parameters from reliable sources. (Inspection ports, connections, vendor documentary information, instrument readings, diagnostic equipment.) using approved methods Use monitoring equipment or procedures correctly to assess the condition of electrical assets Ensure monitoring and checks are carried out in line with specified MMS timescales and schedules.
• Record and communicate monitored outcomes accurately and in timely fashion to raise the effectiveness of MMS.
• Compare current performance with previous assessments and take action where differences must be addressed

3. Diagnose Faults in Electrical Assets.

• Respond promptly to problems in line with approved procedures.
• Select appropriate tests and diagnostic procedures and apply them methodically.
• Determine the cause, nature and extent of problems in the performance and condition of electrical systems or assets.
• Use the results of inspections to determine the appropriate actions to take.
• Record an accurate and full description in the appropriate document history

4. Monitor and Maintain Pollution Control Measures

• Sample and check that controlled process discharges from area of responsibility to the environment are within prescribed limits
• Identify and halt unplanned discharges where possible, and reported immediately according to policy, procedure and regulation
• Equipment, waste or other materials for disposal are dealt with according to the correct procedure
• Ensure resources such as PPE, materials, tools and spares are accounted and not wasted or used inefficiently

5. Emergency Response

• Carry out Emergency Response Role
• Show competence during drills and exercise

Qualifications and Experience:

• Proven experience and qualified to ONC/ HNC, or NVQ Level 3 or recognised equivalent in Electrical Maintenance Engineering 
• Minimum 5 yrs experience preferred, with 2 years offshore petrochemical experience desired  Good knowledge of PTW, Electrical Isolation Standards, Risk Assessment and Man Management, Power Management System, Generation on LV 
• COMP ex E’x’ Course. 
• Preferred courses: HV/LV Protection and HVLV Switching. Medically fit to offshore International standards such as ENG1 or equivalen

About Us

Established in 1972, Guardian Health & Beauty is Singapore’s Number 1 Health and Beauty retailer. With more than 126 stores nation-wide, it retails a comprehensive range of health & beauty products. Guardian has evolved from its pharmacy roots to a holistic one-stop solution for customers’ health and beauty needs. It continues to expand its products and service range to meet the redefinition of beauty by today’s customers – where health meets beauty.

With a strong health heritage, it has the largest network of award-winning pharmacists and a wide selection of health products. Professional services such as patient-care counselling, dispensary services, beauty and personal care solutions are offered at stores as a convenient one-stop for health and beauty. Guardian also operates its online store with more than 9,000 products available and offers the “Click & Collect” services. For more information, please visit www.guardian.com.sg. Follow Guardian Health & Beauty on Facebook, Instagram, Telegram, Youtube and TikTok.

Guardian Health & Beauty is a Progressive Wage (PW) mark accredited company.

The Role

• Support the pharmacist in the daily operational execution of the pharmacy to ensure that it operates smoothly
• Ensure Preparation of prescription and pharmacy-only medications based on prescription are accurate and efficient and to minimize dispensing error
• Control and monitor dispensing stock, OTC, Surgical and Health Supplements to ensure optimal stock and minimal stock wastage due to the expiry of drugs
• Conduct investigation for stock discrepancies
• Provide good customer service to customers so that their needs are met and sales are closed

About You

• Diploma in Pharmaceutical Sciences or WSQ Advanced Certificate in Healthcare Support (Pharmacy Support)
• Able to perform at retail working hours
• Highly motivated team player with good communication skills

Benefits

• Team Member Discount
• Subsidized Medical and Dental Benefits
• Training Opportunities
• Career Advancement

Work location: Islandwide

Addcel has been delivering deep value to clients across Pharmaceutical, Data Centers, Semi-con and Oil & Gas industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation, we take pride and passion in all that we do.

As a Maintenance Technician with Addcel, you will be responsible for:

• Performing preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensuring completion of all preventive and corrective maintenanc, documenting all service reports from vendors
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usgae
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involved in internal and external audits when required
• Any other duties as assigned

A successful candidate for this role will possess:

• Higher Nitec/ Diploma in Electrical/ Mechanical/ Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands-on experience in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Physically fit and able to work at height with MEWP
• Able to support after office hours and weekends when needed
• Well versed in Microsoft Office applications
• Able to read and interpret schematics

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Working Place : Pasir Ris

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

Monday to Saturday

What’s the role?

Shell is looking for individuals to own the process unit to which they are assigned and will be responsible for the operational activities on their unit, the standard and housekeeping of the unit, process isolation and decontamination and the control of maintenance work via Permit to Work (PTW).

• Display field leadership of personal and process safety, and environmental stewardship.
• Ensures adherence and understanding of policies, procedures and guidelines pertaining to health, safety, and environmental issues.
• Apply Blue Zone Barrier Thinking to job planning and hazard recognition and mitigation development.
• Be present on site for critical activities and Take 5 before every task.
• Display learner mindset and operational discipline and thoughtfully comply to the work processes and procedure in execution of core operational duties and work processes including Ensure Safe Production (ESP), PTW, process isolation planning and execution, housekeeping etc.
• Operate process units within the Production Area in accordance to Standard Operating Plan, Daily Operating Instructions, Production Team Lead’s instructions and supervision.
• Operate the plant in compliance to site Operating Procedures, Standing Instructions and site Health, Safety, Security, Environment procedures.
• Optimize plant operations within the Design-Operating-Window and the Integrity-Operating-Window.
• Perform proactive monitoring of the plant and equipment in accordance with ESP and unit specific requirements (as per Production Unit Tier 3 procedure and training workbooks).
• Contribute to keep process materials records and to maintain good housekeeping practices on process plant and in console areas.
• Safely execute minor maintenance activities (MMBO)
• Perform other related duties as required and instructed by senior colleagues.
• Manage plant upsets and abnormal conditions and subsequent troubleshooting including incidents/plant emergencies and subsequent follow-up.
• Perform initial troubleshooting of more challenging/abnormal issue/high risk task (e.g. valve passing, Loss of Primary Containment (LOPC)/test point or drain line choked etc.) and seek assistance when required.
• Proactively support peers from own/other clusters to deliver shift plan when need arises after completing of own duty.
• Report unsafe acts/conditions, near misses and incidents.
• Support shift 5 to understand the root cause of Product Quality/Design Operating Window/upset incident occur within the shift to capture and facilitate learning across shift.
• To deliver the shift plan and steer/targets safely and timely for their unit, in addition to keep unit operations safe and optimized in energy, margin and PQ.If an Authorized Gas Safety Tester (AGST), he/she conducts PTW issuance on unit, including oversight of critical activities, checks for interface across different field positions, i.e. potential incompatible activities. If not an AGST, he/she ensures that he/she has knowledge of all permits issued on their unit.
  Maintain rigor of work/procedure execution by having pre-execution discussion to surface any concern and remind each other about necessary precautions, and timely signoffs of procedures.
  
• Provide unit orientation and practical hands-on skill training to junior PTs/ PT new to the unit on field execution.
• Provide clear and concise information in shift report and a thorough handover to other shifts is conducted in accordance with ESP requirements for situational awareness, proper follow-up and work planning.
• Raise GSAP notifications for defects/maintenance issues with preliminary assessment of work order prioritization for the GSAP notification done based on SAP Business Warehouse (BWP) matrix.
• Create or review process isolation job packs (including de-oiling and decon) and support the execution of process isolation safely and timely to meet Operation Maintenance Coordinator (OMC)’s plan schedule, prepare and approve PTW, and assist in coordination of daily maintenance planning on their unit.
• For senior PTs, the incumbent is a practicing full AGST and will play an active role in helping to set process isolation, PTW, ESP and equipment care standards on their unit.
• Implement assigned operational controls identified in the HSSE Management Systems, Bowties, Hazard sheets and HRAs.
• Monitor the performance of process equipment in his/her process area and make corrections and normalize deviations from plan or escalate to Production Team Lead (PTL).
• Start up and shut-down any section of the process plant in accordance with laid-down procedures and as directed by PTL.
• Contribute in the preparation of shutdown lists, review of P&I (PEFS) diagram checks and produce sketches for process isolation job packs or plant changes.
• Inspects process equipment after completion of maintenance work, including independent check of internals of all equipment before box-up.

What we need from you

• Nitec/Higher Nitec in Chemical Process Technology or Diploma in Chemical Engineering / Chemical & Green Technology / Clean Energy;
• Minimum 3 years of relevant experience in chemical processing or oil refining / utilities e.g. steam boilers and Cogeneration for Process Units;
• Good understanding of Ethylene Cracker HoA (Higher Olefins and Aromatic, C4+) or Utility (Boiler, Cogen, Wastewater Treatment etc.) is an advantage.
• Able to operate DCS independently;
• WSQ Qualifications in workplace safety and health for process plants/manufacturing sites
• Mandatory HSSE competency requirement specifically on ACSSEW (confined space safety assessor);
• Qualified as a gas tester and/or confined space assessor;
• Flexible to perform both shift work and day-work, as well as overtime, when the need arises;
• Should possess the necessary pre-requisites to perform as an Auxiliary Fire Fighter (AFF) who may be called upon to participate in auxiliary firefighting training or in the event of emergency situations.
• Should also be prepared to be qualified as a First Aider.
• Strong problem-solving skills, good technical and process aptitude, and ability to remain calm and composed during emergency to make informed and risk-balanced decision are required.
• Newly graduated applicants are welcome to apply as we have a structured In-house training programme.

SPECIFIC DUTIES & RESPONSIBILITIES

The Technician/Senior Technician is responsible for carrying out preventive / breakdown maintenance on all M&E services and building works. He will be required to be specializing in areas consist of plumbing, masonry, electrical, mechanical, air-conditioning, carpentry or other areas of maintenance work.

This role reports directly to the Chief Engineer/ Assistant Chief Engineer/ Duty Engineer/ Maintenance Supervisor

• Carry out preventive / breakdown maintenance on all plumbing and sanitary systems of the Hotel to ensure that there is no chokage/ blockage in the plumbing and sanitary systems.
• Operate and carry out preventive / breakdown maintenance on all mechanical equipment such as air conditioning system, freezer, refrigerators, pumps, coolers, ice-makers and other refrigeration equipment.
• To operate and carry out preventive maintenance and repairs of all electrical installations and equipment such as generator, fire protection system (including emergency lighting), internal and external lighting, etc. at the hotel – including preventive maintenance for all 542 guestrooms, cycle based on Department Goals.
• Able to carry out M&E installation and repair work
• Able to trouble-shooting building defect and request
• Construct and repair furniture such as cabinet, cupboard, table, chairs, doors and props.
• To place order for materials, fittings and tools according to specifications needed for carpentry. Coordinate with Engineering administrator.
• Carry out painting, polishing, varnish furniture and ensure that they are well varnished. To maintain constant checking of plant operation.
• To ensure standard of operation, safety and housekeeping are up to standard.
• Assist in energy conservation programme and participate in fire-fighting and safety exercise.
• To know the procedures of firefighting.
• To minimize energy wastage.
• To carry out any other duties when directed by the Superior.

Job requirements

• Candidate must possess at least Nitec in Electrical, Mechanical or Building Services or equivalent.
• Preferably with minimum 1-2 years of experience in Engineering related industries for Technician.
• Preferably with minimum 2 years or more of experience in Engineering related industries for Senior Technician.
• Possess skills in maintaining, troubleshooting and repairing of building equipment
• Good communication skills (verbal and written)
• Willingness to learn and work as a team member
• Possess high level of integrity and respect for others

*We regret to inform that only shortlisted candidates will be notified

*This role is for Mercure ICON Singapore City Centre (nearest MRT: Chinatown).

This position ensures that all aspects of building and facilities maintenance in the Schools is at optimum operational condition and conforms to up to date regulatory and safety requirement at all times.

Job Responsibilities:

• Preventative maintenance and ensure all facilities operate efficiently and conform to operating standards.
• Hands-on in meeting urgent repairs/complaints on electrical services, plumbing and sanitary requests.
• Proper maintenance of interior and exterior walls of buildings, appliances and equipment in the building.
• Conduct day to day inspection activities/ checking building wear & tear and defects
• Mobilise and supervise contractors on major / rectification works.
• Ensure compliance with all regulatory and safety regulations
• Comply with company safety guidelines and procedures
• Ensure accurate updates/reports are done for all work progress and completion.
• Monitors and controls expenses within all areas of the department.
• Lead and mentor a team of maintenance technicians.
• Any other duties that is assigned, inclusive of support for new school projects.

Requirements:

• Relevant Diploma/Higher Nitec/Nitec with 3 years relevant experience or
• 5 years of relevant working experience in major building maintenance/construction projects
• Possess a class 2B/3 license with own transport.

We offer a competitive remuneration package plus benefits to the right candidate. Suitably qualified applicants are invited to send your updated resume in MS Word via APPLY NOW button.

Please include cover application letter and detailed CV with current and expected salary and copies of qualifications and testimonials. On appointment original copies must be provided for verification.

Host Pathogen Interactions in A*STAR Infectious Diseases Labs (A*STAR ID Labs) is seeking a Postdoctoral Researcher to join the lab.

We are seeking a talented and collaborative post-doctoral researcher to work in the broad scope of host-pathogen interactions and infectious diseases. The lab has various funded projects on the comparison of host-alphavirus interactions at the immune response level in vivo in animal models through a novel viral-centric and multiOmic approach. Other projects include immune response evaluation of vaccine adjuvant candidates, development of cell-based reporter systems of viral infections to facilitate and accelerate antiviral studies, as well as development of novel vaccine strategies.

The candidate will be expected to work on funded projects as well as develop novel research projects in the scope of the lab research interests to be able to apply to the various early career development schemes both at an internal and external national level. Virus studied in the lab are positive sense RNA viruses as well as some negative sense RNA viruses. Other common techniques and tools in the lab include protein-protein/RNA interactions, microscopy, functional genomics, viral reverse genetics, CRISPR Cas9 gene editing. Animals models available in the lab include mice and zebrafish.

Throughout the project, close collaborative work within A*STAR ID Labs as well as other institutes throughout Singapore and overseas will be used to leverage expertise for high impact studies.

Job Requirements

• PhD in Biomedical Sciences, Life Sciences, Immunology, Virology or related field
• At least 2 to 3 years of relevant experience (immunology or related field) is a plus.
• No virology experience necessary. Prior bioinformatic experience is a plus.
• Highly motivated and able to work independently.
• Team player with good interpersonal skills.
• Good spoken and written communication skills.
• Willing to learn to work in a BSL3 facility if necessary
• Must be comfortable to work with small animal models.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Perform functional and aesthetic inspection of aircraft cabin interiors.

• Document any defects, perform troubleshooting and carry out rectification.

• Support cabin modification, retrofitting and component repair tasks.

• Any other duties as assigned by the supervisor

Requirements:

• NITEC / Higher NITEC, preferably in an Engineering discipline

• At least minimum 2 years of relevant aircraft cabin maintenance experience

• Able to work flexible hours, including weekends and public holidays (rotating shift hours)

Where you fit in

Purpose of the Maintenance Technician (Instrument) is to carry out hands-on maintenance and coordinates maintenance work related to instrumentation in Production Unit (PU). The role assures that activities on the weekly schedule, emergencies or assigned non routine maintenance work are executed with quality and efficiency and in compliance to the site Health, Safety and Environment requirements.

Accountabilities include:

• Provide day-to-day hands-on maintenance/troubleshooting of instrument related matters in PU.
• Ensure compliance of engineering practices and assets with statutory obligations, Engineering Codes of Practices and Shell DEP standards.
• Review and communicate daily / weekly schedule assignments with workforce. Plan / execute / obtain resources, materials, services, and equipment for E and SB priority work repairs.
• Ensure compliance with HSSE standards, Monitor and feedback on the maintenance effectiveness process and take corrective action if required, GSAP administration of time sheets, service, purchase, and material orders. Lead in the timely daily maintenance schedule execution, E/SB work order planning, E/SB reviews, daily updates
• Liaise with/consults Operations, Technology, other Engineering and Procurement departments as part of the execution of jobs
• Initiate and plan to upgrade instrument systems before obsolescence and deteriorations beyond repair.
• Perform end of day schedule progress (percent complete, MCMP, TECO and approve actual hours)
• Ensure completion of QA / QC and condition reports. Field presence and supervisor of maintenance contractor (craft productivity and quality of work) for effective and efficient execution
• Manage the activities in the hard schedule, adopting small adjustments or deviations where necessary. Feedback jobs that roll-over into next week(s) to the scheduler. Identify risks for not achieving schedule and taking mitigating action, keeping maintenance supervisor / team lead informed. Feedback to maintenance planning and scheduling
• Timely request to operations for maintenance permitting Analyze and trouble-shoot instrumentation problems
• Update and maintain spare parts inventory
• Seek improvement in techniques, procedures and technology to improve reliability at minimum costs and within budget.
• Report and recommend improvement on recurring problems/breakdowns
• Involve in scheduled safety walkabout
• Assess the risk of all day to day jobs that is carried out Develop formal JOHAN with all relevant parties for jobs with medium and high risk
• Full compliance with LSR & Safety Rules at all times to achieve Goal Zero

What we need from you:

To be successful in this role, you will have:

• Minimum NITEC Level 2 certification in Instrumentation or Electronics or Electrical, or Diploma/Degree in Instrumentation or Electronics or Electrical
• 3-5 years of relevant experience in Instrument construction/ Maintenance in oil & gas, chemical/ petrochemical or related industries.
• Knowledge in basic control system and/or functional logic is an advantage.
• Proven ability to diagnose and troubleshoot instrument and control system malfunctions.
• Experience with calibration of industrial instrumentation.
• Understanding of control system principles (PLC, DCS) and communication protocols (OPC, Fieldbus, Modbus, HART, Vnet).
• Able to understand PID and have knowledge of instrumentation and control element
• Basic understanding of server system administration, including troubleshooting and maintenance procedures.
• SAP (GSAP) knowledge in Maintenance Module.
• Experience in field work interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Self-motivated with a strong commitment to teamwork and collaboration and managing contractors and vendors.
• Able to work in Team environment as well as standalone when need arises.

* NITEC or equilevant in M&E [Electrical/Airconditioning & minor repair work] with 2-3 years experience in

Commercial Building services

* Supervise team Contractors during maintenance servicing

* Perform routine maintenance/inspection of building work

* Must be prepare to work shift, including weekends

interested applicants, please email: [email protected]

Jobscope

• Operate equipment, clean, assemble and maintain the cleanliness of the equipment.
• Maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment in accordance with SOP / batch document.
• Perform online monitoring and check through the batch
• Complete all relevant documentation required for packing, maintenance and cleaning of equipment in the work area.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all duties required to meet the schedule.
• Check dispensed input packaging materials and product details against batch document.
• Co-ordination with Engineering for break down rectification of Packing equipment.
• Participate in investigation of process deviation, cGMP and all other compliance related matters
• Ensure compliance to GxP / Safety / Quality policies.

Requirements

• Min NITEC education or Higher NITEC/ Diploma in Chemical Processing/ Chemical Technology/ Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• 2-5 years of manufacturing experience in Pharmaceutical, Chemical or related industries.
• Fresh candidates are welcome to apply too as training will be provided
• Good understanding of safe working practices and cGMP.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

GO ID: https://go.persolkelly.com/job/apply/8809

Role: ACMV / HVAC / Aircon Technician
Duration: 1 year contract (Renewable)
Location: Multiple locations - Changi Business Park Crescent, Asian Square Tower, Orchard Rd
Working hours: 12 hours shift; 4 days a week - x 2 Tues & Wed (Night) + x 2 Sat & Sun (Day)
Salary: Up to $3.1k + 1 month bonus

As an HVAC Technician, he will maintain mechanical and electrical equipment for commercial HVAC systems at facilities by conducting proactive performance testing and ongoing scheduled maintenance.

Core Responsibilities:

• Install, repair, adjust, and maintain small electric or pneumatic control systems used for building. This includes heating, ventilation, air conditioning, and refrigeration systems and equipment.
• Conduct ongoing maintenance on building HVAC equipment to ensure proper equipment operation and compliance with all applicable codes, regulations, and work safety.
• Troubleshoot equipment failures and determine the best course of action for equipment modifications.
• Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion.

Requirements:

• Nitec / Diploma with 1 - 2 years of job-related experience.
• Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 20kg or more.
• Ability to follow basic work routines and standards in the application of work.
• Communication skills to exchange straightforward information.
• Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.

We regret to inform you that only shortlisted candidates will be notified.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/8809

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Information:

1. Basic Salary: $2,600 - $3,500 depend on experience ;
2. Polytechnic graduate：$2,600 ; ITE guaduate: $2,400 - $2,500
3. Attendance: $40
4. Morning Shift: 7am - 3pm; Afternoon Shift: 3pm - 11pm ($8.50/day); Night Shift: 11pm - 7am ($14/day)
5. Company transport at various location in the west

Responsibilities:

• Operate and monitor machinery on the assembly line to ensure smooth operation
• Conduct routine maintenance tasks, identify and address any issues with machine operation
• Troubleshoot & repair production machines for mechanism and electrical issues to minimise downtime
• Inspections to identify potential malfunctions and perform preventive maintenance
• Work cross-functionally to identify areas for improvement in quality, productivity and cost reduction
• Develop/modifications to equipment and processes to enhance efficiency and performance
• Plan and execute improvement projects from conception to completion
• Evaluate existing processes and practices to identify opportunities for optimisation
• Propose solutions to improve operational efficiency and product quality
• Develop and update programming for automated production equipment to optimise performance
• Provide training to operators on the operation and maintenance of automated equipment as necessary
• Conduct washing to remove contaminants from ball bearings, ensure adherence to quality standards
• Perform test to assess quality and integrity of ball bearings, documenting results accurately
• Visual inspections to identify defects or abnormalities in the manufacturing process
• Compile audit work papers and documentation to ensure completeness and accuracy
• Assist in the development of audit protocols and procedures
• Perform other administrative duties as assigned
• Adhere to all safety protocols and regulations to ensure a safe working environment
• Maintain cleanliness and organisation in work areas to promote efficiency and safety
• Review/recommend changes on procedures for work environment and safety aspects (E.g. IATF 16949, ISO14001, Safety Management Systems, etc.)
• Attend meetings, reviews, discussion and coordinate with Superior to achieve target and yield rate.

Requirements:

• ITE Nitec/Higher Nitec/Polytechnic diploma in Mechanical/Electrical/Mechatronic engineering
• Entry level are welcome to apply
• Comfortable wearing jumpsuit and cleanroom environment
• Able to commit monthly rotation shift work

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

The famous “hole-in-the-wall” bakery from Canggu, Bali opened its contemporary bakery café at Havelock Road, Singapore in August 2019. Starter Lab centres itself around healthy natural products from hand-crafted sourdough bread, pastries, posh toasts, salads, and locally roasted coffee.

Our sourdough goes through a process of long fermentation using only wild yeast, wholesome natural ingredients, and the magical element of time!

If you are passionate about wholesome food, open to learning, and are customer-focused – we would love to have you join our crew.

We are now on the lookout for talented Bread Technician/Packers for the production of Singapore's best sourdough bread and pastries based in Tai Seng, using wholesome ingredients and artisanal methods.

Role of Bread Technician/Bakers

• Reporting directly to Head of Production
• Slice and pack bread for our clients
• Sort bread according to the packing list
• Label boxes and crates correctly and clearly
• Monitor product quality frequently, reporting problems immediately if any arise
• Work closely with bakers to ensure quality control

Skills and Abilities

• Food and beverage experience a plus but not essential
• High hygiene standards
• Can work independently
• Excellent communication skills and an eye for detail

Work Location: Ang Mo Kio

Working Hours: Mondays to Fridays: 7:30am to 3:00pm, inclusive of 1hr lunch break

Contract Period: 1 Jan 2025 to 31 December 2025

Job Description:

• Preparation of materials and apparatus for Science lessons
• Management, operation and maintenance of the science laboratories and outdoor facilities
• Carry out stocktaking of Science resources
• Curating of students’ artefacts for teachers’ reflections
• Ad-hoc duties as assigned by school

Job Requirement:

(a) Shall have minimum GCE O levels or equivalent qualification with subject related to Science

(b) Should preferably have 2 years of relevant experience in administration and operations, preferably in supporting Science activities in a school environment

(c) Should be an excellent team-player who is organized and with the ability to multi-task

(d) Should be proficient in software skills (eg Microsoft office, video taking)

(e) Should have good communication and inter-personal skills

(f) Proficiency in English is preferred

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret to inform you that only shortlisted candidates will be notified. All applications will be treated with the strictest confidence.

Maxhunt Resource Pte Ltd | EA Licence: 22C1322

Loh Wing Sheng | Registration No: R22110239

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Location: Bukit Merah

3 months renewable Temp Staff

Any 5 days Mon - Sunday 8:30am - 6pm / 12pm - 9pm

rate: $12/hr

Duty will be packing of OT loaner sets in a sterile environment

Requirement:

Must be able to carry heavy load: 12-15kg

Must be comfortable to wear PPE

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!
Interested candidates, please submit your resume to [email protected]

Alison Chen
Outsourcing Team
Recruit Express Pte Ltd (EA Licence No.: 99C4599)

1) To carry out preventive maintenance / servicing of fire protection systems for Residential, Industrial, Commercial Buildings & Hotels etc

2) Able to communicate effectively with good sense of responsibility with positive attitude and a good team player

3) Liaise with clients for servicing schedule & prepare service

report / work report

4) Basic knowledge on MS words & Excel for quotation & schedule purpose

5) Able to work independently

6) Basic knowledge on the operation of the fire protection system

Job Responsibilities:

We’re looking for a passionate, creative, and engaging science tutor who can make learning fun and empower students to believe in their potential. You will guide students through exciting lessons in science, fostering curiosity, and helping them develop both academic skills and personal confidence.

He/She must provide syllabus guidance, review of concepts, timed exam practices, and targeted homework and feedback to each student.

Job Requirements:

We are seeking full-time tutors for Science for Primary and Lower secondary.

• At least 1 year or more experience in teaching Primary and lower Secondary.
• Prepared students to sit for the PSLE, lower secondary examination and familiar with the syllabus.
• If you teach online, then you need to know the relevant tools e.g. Zoom, webex, Google Meet.
• Possess at least A-levels or a Diploma/Degree in any field.
• Excellent verbal and written communication in English
• Good attitude and sense of responsibility
• Passion for teaching and inspiring students with creative and fun learning methods.
• Keen eye for detail
• Ability to teach both individual and group classes
• Able to create resources and creative delivery.
• Tutors should ideally have relevant experience teaching,
• This full-time position requires tutors who are based in Singapore and can teach in person only.
• Fresh A level and Graduates are welcome

Our client is a leading provider of food, water, and environmental testing services across APAC region. Due to business needs, they are now recruiting a Laboratory Manager to be part of their Chemical Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Laboratory Manager:

• Document, revise, and assess lab methods in collaboration with Quality, Operations, and Business Development teams.
• Contribute to strategic planning and projects to meet customer needs and expand lab capabilities.
• Plan and coordinate validation of chemistry test methods, reporting progress to leadership.
• Lead staff development, implement training programs, and conduct weekly technical training sessions.
• Monitor technical performance, ensuring competency through standardized KPIs and addressing any issues.
• Provide technical support across sites, resolving issues and ensuring smooth operations.
• Assess market needs for testing services and support budget planning and reporting.
• Maintain scientific integrity, ensuring quality control and resolving any technical issues.
• Lead customer communication, addressing technical inquiries and ensuring prompt resolution.
• Participate in technical audits, driving continuous improvement in Health, Safety, and Environment practices.

Requirements:

• PhD in Chemistry
• 10 years of relevant experience with Food Testing Lab and Commercial Testing Lab

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Working Hours: 5.5 days office hours + Rostered on call (1 week every 2 months)

Location: Central

Job Scope:

- Assist the Radiologist/Cardiologist and other Specialists in Diagnostic Imaging procedure and invasive procedure in CVL. Also inserts brannula at radiologists instructions for contrast examinations.

- Prepare sterile trolleys and sets up equipments/ accessories for Diagnostic Imaging and CVL procedures.

- Perform Newborn Hearing Screening and ECG.

- Ensure that patients fill up the Consent Form for special examinations such as MRI, IVP, CT Scan and other invasive procedures etc

- Ensure that all special preparation for diagnostic imaging is instructed to ward staff/ patient or relatives and complied with.

- Explain the procedure of the special examination to patients and reassures patient whenever required.

- Help patients to get changed for radiography procedure.

- Ensure that all medication chart and documentation notes are filled in properly for the procedure

- Check Emergency Trolley for expiry dates of drugs and instruments.

- Conduct monthly departmental inventory check.

- Ensure that there is an adequate stocks of surgical and pharmaceutical products, dry store, kitchen store and C.S.S.D. store.

- Assist at the reception when necessary.

- Attend and contributes to departmental staff meetings.

- Participate in departmental activities such as quality assurance and performance appraisal.

- Undertake other duties and tasks as might from time to time be requested by the Manager.

Job Requirements:

- Min. Diploma/ Degree in nursing

- Valid SNB & BCLS

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

Responsibilities

· Performing laboratory tests in order to produce reliable and precise data to support scientific investigations;

· Carrying out routine tasks accurately and following strict methodologies to carry out analyses;

· Preparing specimens and samples;

· Constructing, maintaining and operating standard laboratory equipment, for example centrifuges, titrators, pipetting machines and pH meters;

· Ensuring the laboratory is well-stocked and resourced;

Requirements

• Min Diploma in CPT, Biotechnology, Biomedical Science or equivalent

• Excellent communication skills is a must

• Meticulous and able to handle numbers is a must

• Proficient in more than one language

• Proficient in Microsoft Office

• Location : Central

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected] (Attn: Lab Technician - Leon)

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599