Job Opportunity: Contract Micro Lab Technician

Location: Tuas
Contract Duration: 12 months (with a 2-month completion bonus)
Salary Range: $3,000 - $3,400 (base)
Transport: No allowance, but a company bus is provided from Boon Lay, Jurong East, CCK, Outram, and Bedok MRT
Working Hours: Monday to Friday, 8:15 AM to 5:00 PM

Job Scope:

• Sample preparation for analysis of water and solid samples
• Analysis of water samples using manual titration, colorimetric methods, and instruments like TOC, flow injection analyser, UV-spectrometer, and titrator
• Maintaining the ISO17025 system

How to Apply:

Contract : 1 year : Start 2 Jan 2025

Work Hours: Monday to Thursday : 8.00am to 5.30pm

Friday: 8am to 5.30pm

Job Responsiblities:

- Man the school science lab - clean and tidy

-Prepare lab material / resource for experiment

-Assist teacher in planning their activities.

-Maintain general cleanliness and functionality of equipment

- Other job assignby HOD- support admin work and learning material.

Job Requirement

- GCE N level

- relevant Lab Technician experience in School setting

- good communication skills to liase with teacher student and other stakeholder

Job Scope

• Ensure compliance to the manufacturing process by following the official work instruction or other related documents. In process checking, adjustment and set-up
• Follow the work schedule assigned by the supervisor to meet the production KPI
• Must take care the quality of the products and tools provided for assembly and also moving, packing, and sorting parts or finished goods.

Requirements and Qualifications

• Experience in working with industrial machines
• High school or diploma with internship certificate considerable
• Preferable with ITE or Technical Certificate in Mechanical/Electrical or minimum 2years experience.

The position holder is responsible for maintaining and servicing a range of well-known diesel generators ranging from 10KVA to 4MW and both HT and LT generators. Reporting to your team Senior Service Tech or Team Senior Service Engineer / leader

Key Tasks:

• Carry out fault finding and diagnosis to a range of diesel generator sets.
• Resolve electrical and mechanical engine problems
• Replacing electrical and mechanical components
• Carry out Full engine servicing
• Carry out site testing, inclusive of load bank testing for both HT and LT generators
• Customer liaison, update and ensure complete customer satisfaction.
• Good housekeeping of both customer sites and company vehicle
• Adhere to company health & safety standards

Requirements

Education

• Minimum Diploma/ITC/NTC in Mechanical or Electrical Engineering - LEW an added advantage
• SEC/SEC (K) Certificate if applicable

Knowledge / Experience / Others

• Previous experience working on Diesel Generators
• With minimum 3 years hand on experience on Diesel Generators
• Completed an apprenticeship in Mechanical Engineering / Electrical Engineering / Diesel or Plant Fitting, or have a relevant qualification in one of those courses.
• Ideally strong knowledge of diesel generators such Cummins / Volvo / Perkins / Mitsubishi / John Deer / Droman / Deutz and any other brands
• Possess a valid Singapore driving license .

Personal Competencies

• Able to use own initiative as well as working as part of a team
• Good customer service and communication skills

1. Maintain and adjust the condition of electrical assets: Electrical Systems, Equipment, UPS Batteries, Generators

Switchboards, Motors, Wiring, Portable tools etc

• Comply with relevant authorisation procedures, safe working practices and specific instructions.
• Complete maintenance in an agreed timescale, using safe and appropriate methods and agreed procedures.
• Ensure resources and spares are planned for and used cost effectively.
• Ensure the correct, current operating requirements are available for reference.
• Ensure any assets which have been maintained or had parameters adjusted still comply with spec ified operating requirements with minimum disruption and with the specified methods, tools and materials.
• Monitor and record any maintenance or adjustments accurately in work history in MMS.

2. Monitor And Assess The Performance And Condition Of Electrical Assets

• Obtain information or parameters from reliable sources. (Inspection ports, connections, vendor documentary information, instrument readings, diagnostic equipment.) using approved methods Use monitoring equipment or procedures correctly to assess the condition of electrical assets Ensure monitoring and checks are carried out in line with specified MMS timescales and schedules.
• Record and communicate monitored outcomes accurately and in timely fashion to raise the effectiveness of MMS.
• Compare current performance with previous assessments and take action where differences must be addressed

3. Diagnose Faults in Electrical Assets.

• Respond promptly to problems in line with approved procedures.
• Select appropriate tests and diagnostic procedures and apply them methodically.
• Determine the cause, nature and extent of problems in the performance and condition of electrical systems or assets.
• Use the results of inspections to determine the appropriate actions to take.
• Record an accurate and full description in the appropriate document history

4. Monitor and Maintain Pollution Control Measures

• Sample and check that controlled process discharges from area of responsibility to the environment are within prescribed limits
• Identify and halt unplanned discharges where possible, and reported immediately according to policy, procedure and regulation
• Equipment, waste or other materials for disposal are dealt with according to the correct procedure
• Ensure resources such as PPE, materials, tools and spares are accounted and not wasted or used inefficiently

5. Emergency Response

• Carry out Emergency Response Role
• Show competence during drills and exercise

Qualifications and Experience:

• Proven experience and qualified to ONC/ HNC, or NVQ Level 3 or recognised equivalent in Electrical Maintenance Engineering 
• Minimum 5 yrs experience preferred, with 2 years offshore petrochemical experience desired  Good knowledge of PTW, Electrical Isolation Standards, Risk Assessment and Man Management, Power Management System, Generation on LV 
• COMP ex E’x’ Course. 
• Preferred courses: HV/LV Protection and HVLV Switching. Medically fit to offshore International standards such as ENG1 or equivalen

About Us

Established in 1972, Guardian Health & Beauty is Singapore’s Number 1 Health and Beauty retailer. With more than 126 stores nation-wide, it retails a comprehensive range of health & beauty products. Guardian has evolved from its pharmacy roots to a holistic one-stop solution for customers’ health and beauty needs. It continues to expand its products and service range to meet the redefinition of beauty by today’s customers – where health meets beauty.

With a strong health heritage, it has the largest network of award-winning pharmacists and a wide selection of health products. Professional services such as patient-care counselling, dispensary services, beauty and personal care solutions are offered at stores as a convenient one-stop for health and beauty. Guardian also operates its online store with more than 9,000 products available and offers the “Click & Collect” services. For more information, please visit www.guardian.com.sg. Follow Guardian Health & Beauty on Facebook, Instagram, Telegram, Youtube and TikTok.

Guardian Health & Beauty is a Progressive Wage (PW) mark accredited company.

The Role

• Support the pharmacist in the daily operational execution of the pharmacy to ensure that it operates smoothly
• Ensure Preparation of prescription and pharmacy-only medications based on prescription are accurate and efficient and to minimize dispensing error
• Control and monitor dispensing stock, OTC, Surgical and Health Supplements to ensure optimal stock and minimal stock wastage due to the expiry of drugs
• Conduct investigation for stock discrepancies
• Provide good customer service to customers so that their needs are met and sales are closed

About You

• Diploma in Pharmaceutical Sciences or WSQ Advanced Certificate in Healthcare Support (Pharmacy Support)
• Able to perform at retail working hours
• Highly motivated team player with good communication skills

Benefits

• Team Member Discount
• Subsidized Medical and Dental Benefits
• Training Opportunities
• Career Advancement

Work location: Islandwide

Addcel has been delivering deep value to clients across Pharmaceutical, Data Centers, Semi-con and Oil & Gas industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation, we take pride and passion in all that we do.

As a Maintenance Technician with Addcel, you will be responsible for:

• Performing preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensuring completion of all preventive and corrective maintenanc, documenting all service reports from vendors
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usgae
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involved in internal and external audits when required
• Any other duties as assigned

A successful candidate for this role will possess:

• Higher Nitec/ Diploma in Electrical/ Mechanical/ Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands-on experience in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Physically fit and able to work at height with MEWP
• Able to support after office hours and weekends when needed
• Well versed in Microsoft Office applications
• Able to read and interpret schematics

Job Description

• Perform non-destructive tests (NDT) and determine product acceptability to the authorized limits of the NDT level obtained in accordance with the prescribed methods and procedures
• Perform NDT Inspection duties in support of customer parts
• Record, organize and evaluate test results and generate NDT reports
• Perform verification of In-coming / In-process dimensional inspection
• Perform Final Dimensional and Visual Inspection
• Maintain all measuring equipment in QA Department
• Ensures compliance to all radiation safety rules and regulations and provides protections to self and others during testing
• Dispose of hazardous waste in accordance with Environmental Regulations
• Maintenance and calibration of all NDT equipments
• Buy off and maintain NDT consumables and ensure inventory is up to date
• Coordinate NDT Inspection workload according to priorities, efficiency and cost
• Participate and drive any projects assigned
• Take on any task assigned by superior

Requirements

• Minimum Technical Certificate/NITEC in Engineering (Mechanical/Precision) or equivalent
• At least two years working experience in related field
• Able to perform measurement using micrometer, surface roughness, bore gauge and NDT Level II (At least LPI, MPI & UT)
• Required language(s): English (both spoken and written)
• Must be computer literate
• Positive working attitude & self motivated

This position ensures that all aspects of building and facilities maintenance in the Schools is at optimum operational condition and conforms to up to date regulatory and safety requirement at all times.

Job Responsibilities:

• Preventative maintenance and ensure all facilities operate efficiently and conform to operating standards.
• Hands-on in meeting urgent repairs/complaints on electrical services, plumbing and sanitary requests.
• Proper maintenance of interior and exterior walls of buildings, appliances and equipment in the building.
• Conduct day to day inspection activities/ checking building wear & tear and defects
• Mobilise and supervise contractors on major / rectification works.
• Ensure compliance with all regulatory and safety regulations
• Comply with company safety guidelines and procedures
• Ensure accurate updates/reports are done for all work progress and completion.
• Monitors and controls expenses within all areas of the department.
• Lead and mentor a team of maintenance technicians.
• Any other duties that is assigned, inclusive of support for new school projects.

Requirements:

• Relevant Diploma/Higher Nitec/Nitec with 3 years relevant experience or
• 5 years of relevant working experience in major building maintenance/construction projects
• Possess a class 2B/3 license with own transport.

We offer a competitive remuneration package plus benefits to the right candidate. Suitably qualified applicants are invited to send your updated resume in MS Word via APPLY NOW button.

Please include cover application letter and detailed CV with current and expected salary and copies of qualifications and testimonials. On appointment original copies must be provided for verification.

SPECIFIC DUTIES & RESPONSIBILITIES

The Technician/Senior Technician is responsible for carrying out preventive / breakdown maintenance on all M&E services and building works. He will be required to be specializing in areas consist of plumbing, masonry, electrical, mechanical, air-conditioning, carpentry or other areas of maintenance work.

This role reports directly to the Chief Engineer/ Assistant Chief Engineer/ Duty Engineer/ Maintenance Supervisor

• Carry out preventive / breakdown maintenance on all plumbing and sanitary systems of the Hotel to ensure that there is no chokage/ blockage in the plumbing and sanitary systems.
• Operate and carry out preventive / breakdown maintenance on all mechanical equipment such as air conditioning system, freezer, refrigerators, pumps, coolers, ice-makers and other refrigeration equipment.
• To operate and carry out preventive maintenance and repairs of all electrical installations and equipment such as generator, fire protection system (including emergency lighting), internal and external lighting, etc. at the hotel – including preventive maintenance for all 542 guestrooms, cycle based on Department Goals.
• Able to carry out M&E installation and repair work
• Able to trouble-shooting building defect and request
• Construct and repair furniture such as cabinet, cupboard, table, chairs, doors and props.
• To place order for materials, fittings and tools according to specifications needed for carpentry. Coordinate with Engineering administrator.
• Carry out painting, polishing, varnish furniture and ensure that they are well varnished. To maintain constant checking of plant operation.
• To ensure standard of operation, safety and housekeeping are up to standard.
• Assist in energy conservation programme and participate in fire-fighting and safety exercise.
• To know the procedures of firefighting.
• To minimize energy wastage.
• To carry out any other duties when directed by the Superior.

Job requirements

• Candidate must possess at least Nitec in Electrical, Mechanical or Building Services or equivalent.
• Preferably with minimum 1-2 years of experience in Engineering related industries for Technician.
• Preferably with minimum 2 years or more of experience in Engineering related industries for Senior Technician.
• Possess skills in maintaining, troubleshooting and repairing of building equipment
• Good communication skills (verbal and written)
• Willingness to learn and work as a team member
• Possess high level of integrity and respect for others

*We regret to inform that only shortlisted candidates will be notified

*This role is for Mercure ICON Singapore City Centre (nearest MRT: Chinatown).

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Working Place : Pasir Ris

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

Monday to Saturday

SUMMARY:

Work within a team of skilled technicians to provide serviceable vehicles to ensure that service delivery standards are met, whilst maintaining vehicles to the service standards required to comply with the Company’s policies and procedures; as well as legislative and LTA contractual obligations.

PRINCIPAL RESPONSIBILITIES AND AUTHORITIES:

• Responsible for maximising personal performance by working efficiently and effectively which should achieve a minimum of four vehicle inspections in a working day – allowing approximately two hours for each inspection;
• Ensure a ‘right first time’ approach to maintenance, remaining flexible and adaptable to the changing maintenance demands;
• Deliver a high standard of vehicle repairs in accordance with the approved service regimes and work instructions;
• Carry out the duties allocated by the Workshop Planning Manager and Engineering Supervisors ensuring that the required work is undertaken within the specified timelines;.
• Diagnosing any possible faults with the vehicles and determining the best and most effective solutions for repair and maintenance;
• Remain up to date with the changing technologies of the fleet and attend the relevant courses when necessary;
• Proactively contribute to the team performance to ensure that vehicles are maintained to highest standards;
• Respond to Operations Control requests to attend to on-road repairs;
• Undertake first-line maintenance of the CFMS and BTS equipment in accordance with the relevant maintenance schedule;
• Responsible for correctly booking out any parts required to carry out maintenance;
• Ensure that parts are used in a cost effective manner and identify any areas of concern to the Engineering Supervisor;
• Communicate effectively with the Operations Supervisors, Bus Captains and the Engineering Team to deliver a reliable maintenance service;
• Adhere to the Company Health and Safety procedures in relation to working in the Engineering department;
• Ensure that the correct PPE is worn at all times and that safety equipment is used when working with machinery;
• Train other employees in engineering procedures and processes as to a level of competency, including trainees/apprentices.
• Undertake any additional reasonable duties as requested by the Engineering Supervisor and Workshop Planning Manager.
• Undertake any training and development activities as requested by the Engineering Supervisor or Workshop Planning Manager.
• Maintain good housekeeping, safety and security of workshop and work areas
• Ensure compliance with all workshop procedures, safe work practices and work instructions
• Mentor and supervise assigned staff under your charge.
• Ensure Zero Industrial accident and compliance to all statutory and or government regulations.

SKILLS, EXPERIENCE, CONDITIONS SPECIFICATION:

• Flexibility of working hours is essential as shift and weekend are a feature of this role.
• Hold the relevant trades certificates for the functions undertaken within the position. Minimally possess a NITEC in Automotive Technology, Mechatronics or equivalent
• An engineering awareness and familiarity with vehicle component parts;
• Experience using computer based inventory systems;
• Hold and retain a valid forklift operator licence,
• Possess a valid Class 4A / 4 / 5 Driving license - if not, may be required to obtain within 12 months of commencing employment in the position.

SAFETY AND COMPANY RESPONSIBILITIES:

• To adhere to all company policies and procedures.
• To take care of your own safety and the safety of others at all times by complying with your responsibilities, particularly in relation to health and safety, as outlined in the company policies and procedures and under the relevant Health and Safety at Work Act.
• To report to your line managers any injury, collision of dangerous occurrence in which you may have been involved, or are aware of having taken place at your work location, or any concern you have about health and safety issues.

What’s the role?

Shell is looking for individuals to own the process unit to which they are assigned and will be responsible for the operational activities on their unit, the standard and housekeeping of the unit, process isolation and decontamination and the control of maintenance work via Permit to Work (PTW).

• Display field leadership of personal and process safety, and environmental stewardship.
• Ensures adherence and understanding of policies, procedures and guidelines pertaining to health, safety, and environmental issues.
• Apply Blue Zone Barrier Thinking to job planning and hazard recognition and mitigation development.
• Be present on site for critical activities and Take 5 before every task.
• Display learner mindset and operational discipline and thoughtfully comply to the work processes and procedure in execution of core operational duties and work processes including Ensure Safe Production (ESP), PTW, process isolation planning and execution, housekeeping etc.
• Operate process units within the Production Area in accordance to Standard Operating Plan, Daily Operating Instructions, Production Team Lead’s instructions and supervision.
• Operate the plant in compliance to site Operating Procedures, Standing Instructions and site Health, Safety, Security, Environment procedures.
• Optimize plant operations within the Design-Operating-Window and the Integrity-Operating-Window.
• Perform proactive monitoring of the plant and equipment in accordance with ESP and unit specific requirements (as per Production Unit Tier 3 procedure and training workbooks).
• Contribute to keep process materials records and to maintain good housekeeping practices on process plant and in console areas.
• Safely execute minor maintenance activities (MMBO)
• Perform other related duties as required and instructed by senior colleagues.
• Manage plant upsets and abnormal conditions and subsequent troubleshooting including incidents/plant emergencies and subsequent follow-up.
• Perform initial troubleshooting of more challenging/abnormal issue/high risk task (e.g. valve passing, Loss of Primary Containment (LOPC)/test point or drain line choked etc.) and seek assistance when required.
• Proactively support peers from own/other clusters to deliver shift plan when need arises after completing of own duty.
• Report unsafe acts/conditions, near misses and incidents.
• Support shift 5 to understand the root cause of Product Quality/Design Operating Window/upset incident occur within the shift to capture and facilitate learning across shift.
• To deliver the shift plan and steer/targets safely and timely for their unit, in addition to keep unit operations safe and optimized in energy, margin and PQ.If an Authorized Gas Safety Tester (AGST), he/she conducts PTW issuance on unit, including oversight of critical activities, checks for interface across different field positions, i.e. potential incompatible activities. If not an AGST, he/she ensures that he/she has knowledge of all permits issued on their unit.
  Maintain rigor of work/procedure execution by having pre-execution discussion to surface any concern and remind each other about necessary precautions, and timely signoffs of procedures.
  
• Provide unit orientation and practical hands-on skill training to junior PTs/ PT new to the unit on field execution.
• Provide clear and concise information in shift report and a thorough handover to other shifts is conducted in accordance with ESP requirements for situational awareness, proper follow-up and work planning.
• Raise GSAP notifications for defects/maintenance issues with preliminary assessment of work order prioritization for the GSAP notification done based on SAP Business Warehouse (BWP) matrix.
• Create or review process isolation job packs (including de-oiling and decon) and support the execution of process isolation safely and timely to meet Operation Maintenance Coordinator (OMC)’s plan schedule, prepare and approve PTW, and assist in coordination of daily maintenance planning on their unit.
• For senior PTs, the incumbent is a practicing full AGST and will play an active role in helping to set process isolation, PTW, ESP and equipment care standards on their unit.
• Implement assigned operational controls identified in the HSSE Management Systems, Bowties, Hazard sheets and HRAs.
• Monitor the performance of process equipment in his/her process area and make corrections and normalize deviations from plan or escalate to Production Team Lead (PTL).
• Start up and shut-down any section of the process plant in accordance with laid-down procedures and as directed by PTL.
• Contribute in the preparation of shutdown lists, review of P&I (PEFS) diagram checks and produce sketches for process isolation job packs or plant changes.
• Inspects process equipment after completion of maintenance work, including independent check of internals of all equipment before box-up.

What we need from you

• Nitec/Higher Nitec in Chemical Process Technology or Diploma in Chemical Engineering / Chemical & Green Technology / Clean Energy;
• Minimum 3 years of relevant experience in chemical processing or oil refining / utilities e.g. steam boilers and Cogeneration for Process Units;
• Good understanding of Ethylene Cracker HoA (Higher Olefins and Aromatic, C4+) or Utility (Boiler, Cogen, Wastewater Treatment etc.) is an advantage.
• Able to operate DCS independently;
• WSQ Qualifications in workplace safety and health for process plants/manufacturing sites
• Mandatory HSSE competency requirement specifically on ACSSEW (confined space safety assessor);
• Qualified as a gas tester and/or confined space assessor;
• Flexible to perform both shift work and day-work, as well as overtime, when the need arises;
• Should possess the necessary pre-requisites to perform as an Auxiliary Fire Fighter (AFF) who may be called upon to participate in auxiliary firefighting training or in the event of emergency situations.
• Should also be prepared to be qualified as a First Aider.
• Strong problem-solving skills, good technical and process aptitude, and ability to remain calm and composed during emergency to make informed and risk-balanced decision are required.
• Newly graduated applicants are welcome to apply as we have a structured In-house training programme.

Established fire-fighting company looking for Service Technicians.

- Training will be provided

- Perferably with Class 3 Driving License

- Able to work overtime

- Secondary or ITE welcome

- Preferably staying in Clementi or Jurong area

Interested please email with resume to [email protected]

Host Pathogen Interactions in A*STAR Infectious Diseases Labs (A*STAR ID Labs) is seeking a Postdoctoral Researcher to join the lab.

We are seeking a talented and collaborative post-doctoral researcher to work in the broad scope of host-pathogen interactions and infectious diseases. The lab has various funded projects on the comparison of host-alphavirus interactions at the immune response level in vivo in animal models through a novel viral-centric and multiOmic approach. Other projects include immune response evaluation of vaccine adjuvant candidates, development of cell-based reporter systems of viral infections to facilitate and accelerate antiviral studies, as well as development of novel vaccine strategies.

The candidate will be expected to work on funded projects as well as develop novel research projects in the scope of the lab research interests to be able to apply to the various early career development schemes both at an internal and external national level. Virus studied in the lab are positive sense RNA viruses as well as some negative sense RNA viruses. Other common techniques and tools in the lab include protein-protein/RNA interactions, microscopy, functional genomics, viral reverse genetics, CRISPR Cas9 gene editing. Animals models available in the lab include mice and zebrafish.

Throughout the project, close collaborative work within A*STAR ID Labs as well as other institutes throughout Singapore and overseas will be used to leverage expertise for high impact studies.

Job Requirements

• PhD in Biomedical Sciences, Life Sciences, Immunology, Virology or related field
• At least 2 to 3 years of relevant experience (immunology or related field) is a plus.
• No virology experience necessary. Prior bioinformatic experience is a plus.
• Highly motivated and able to work independently.
• Team player with good interpersonal skills.
• Good spoken and written communication skills.
• Willing to learn to work in a BSL3 facility if necessary
• Must be comfortable to work with small animal models.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Enter inspection data and maintain filing.
• Write quality records and checklists.
• Store and maintain equipment.
• Conduct microbiological tests and analyses.
• Calibrate equipment.
• Train new lab staff.
• Consolidate product release documents.
• Generate certificates of analysis.
• Tag product status in the system.
• Manage QR scanning and inventory.
• Scrape QR and tested samples.
• Verify chemical mixing processes.
• Perform other assigned duties.

Requirement:

• No need experience , Training Provided
• Min N/ O Level

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Job Description

• Working experience as Lab Technician in primary or secondary school.
• Prepare apparatus for science experiments before the lesson
• Stock take of equipment and managing of materials used by science experiments periodically. Send a logistic report on the stock checking per term.
• Monitor and alert to the school for replenishment of materials.
• Assist HOD science to search for vendors on purchasing of science related equipment when necessary
• Simple repairs to any damage of electrical apparatus or any similar work related to science
• Knowledge of using and handling datalogger
• Able to render first-aid service to students if necessary

Requirements

• Have 2 years of prior experience in operations or job related experience as mentioned above
• Have basic computing skills such as Microsoft Office applications such as Words and Excel
• Education Qualifications – 5 ‘O’ Level Passes
• Knowledge of using and handling datalogger

Working hours

• Mondays to Fridays: 7:30am to 2:00pm, inclusive of 30 minutes of lunch break
• Service not required on Saturdays, Sundays and gazetted public holidays

Working locations

• (School environment)

Additional info:

• Contract Period: From 2 January 2025 to 21 November 2025
• With option to extend (Discretion)
• This is an outsourced role

If you are what we are looking for & keen to apply, kindly send in your resume (in MS Word format) to Fadhilah at [email protected] | 64941546

All Curriculum Vitaes will be treated with the strictest confidentiality. We regret to inform that only shortlisted candidates will be notified.

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to RMA Groups’ PDPA and e2i’s PDPA.

Norfadhilah Awang

EA License No. 93C4403

EA Regn. No. R24120699

Work Location: Ang Mo Kio

Working Hours: Mondays to Fridays: 7:30am to 3:00pm, inclusive of 1hr lunch break

Contract Period: 1 Jan 2025 to 31 December 2025

Job Description:

• Preparation of materials and apparatus for Science lessons
• Management, operation and maintenance of the science laboratories and outdoor facilities
• Carry out stocktaking of Science resources
• Curating of students’ artefacts for teachers’ reflections
• Ad-hoc duties as assigned by school

Job Requirement:

(a) Shall have minimum GCE O levels or equivalent qualification with subject related to Science

(b) Should preferably have 2 years of relevant experience in administration and operations, preferably in supporting Science activities in a school environment

(c) Should be an excellent team-player who is organized and with the ability to multi-task

(d) Should be proficient in software skills (eg Microsoft office, video taking)

(e) Should have good communication and inter-personal skills

(f) Proficiency in English is preferred

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret to inform you that only shortlisted candidates will be notified. All applications will be treated with the strictest confidence.

Maxhunt Resource Pte Ltd | EA Licence: 22C1322

Loh Wing Sheng | Registration No: R22110239

We are looking for a proactive and detail-oriented Solar Technician / Solar Engineer to support our Project Manager in the planning, coordination, and execution of solar projects. The ideal candidate will assist in optimizing resources, conducting site studies, managing site teams, and ensuring projects adhere to safety standards, timelines, and budgets. This role is perfect for fresh graduates looking to gain experience in the renewable energy sector, with on-the-job training provided.

Key Responsibilities:

• Assist the Project Manager in coordinating, planning, and forecasting resources to optimize utilization and meet project milestones and budgetary goals.
• Conduct site studies to assess conditions and provide recommendations for photovoltaic (PV) systems.
• Oversee and manage the solar project site team, ensuring that all work complies with safety regulations and standards.
• Monitor work progress at the project site to ensure that it aligns with the technical specifications, project schedule, and budget.
• Ensure that all site activities follow safety standards and regulations.

Requirements:

• Diploma in Mechanical or Electrical Engineering, or a related discipline is preferred.
• Fresh graduates are welcome to apply. On-the-job training will be provided.
• AutoCAD, SolidWorks, and other modeling software (e.g., SketchUp, PVsyst, Helioscope).

If you are keen to join our dynamic team, please submit your resume in either Word or PDF format to [email protected]. In your application, kindly include the following details:

• Current Salary
• Expected Salary
• Availability
• Reason for Leaving

We appreciate your interest in this opportunity. Please note that only shortlisted candidates will be contacted for further consideration.

By submitting your application or resume, you acknowledge and consent to the collection, use, retention, and disclosure of your personal information by us to potential employers through our services.

EA (23S1595/R23116355)

Job Description:

• Perform functional and aesthetic inspection of aircraft cabin interiors.

• Document any defects, perform troubleshooting and carry out rectification.

• Support cabin modification, retrofitting and component repair tasks.

• Any other duties as assigned by the supervisor

Requirements:

• NITEC / Higher NITEC, preferably in an Engineering discipline

• At least minimum 2 years of relevant aircraft cabin maintenance experience

• Able to work flexible hours, including weekends and public holidays (rotating shift hours)

We are looking for a Software Quality Assurance Analyst who are passionate about improving the quality of the services. The QA will be part of an in-house team tasked with developing and maintaining the system.

Responsibilities:

• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Create, maintain and improve the automated test framework and test environments
• Conduct testing on new features and file defects
• Perform various tests such as manual/functional/performance/exploratory tests support UATs
• Assist in resolving production cases
• Participate in all agile ceremonies

Requirements:

• Degree in software engineering, computer engineering, electrical engineering or Infocomms-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Experience with various testing tools will be an added advantage:
• Experience with open-source automated testing frameworks (i.e. Robot, Appium, Selenium) or Enterprise level testing tools (e.g. HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated

Join us in our walk-in interview!

Date: Wednesday, 6 November 2024

Time: 10.30am to 4.30pm

Venue: One Punggol Community Club

Level 4 Multi Purpose Room

1 Punggol Drive S(828629)

(Opposite Safra Punggol)

Note: Please bring along a copy of your resume & education transcripts for reference

*Singapore Citizens only*

Job description:

Looking to venture into the Aerospace industry? NO PRIOR EXPERIENCE REQUIRED

We are the world's largest airframe MRO solution provider with over 45 years of experience in aviation and are backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe.

We are looking for individuals who are passionate about Aerospace MRO to join us today!

What you can look forward to:

• Structured training program (classroom + OJT)
• Competitive remuneration package
• Career growth and development

Responsibilities:

(After completion of Aircraft Maintenance Technician (ACMT) training)

• Perform preventive maintenance checks on aircraft systems, structural and/or electrical/ electronic components
• Fabricate and perform approved minor repairs on airframe sheet metal parts, electrical wirings and/or subsystem assemblies' components
• Perform simple operational checks on aircraft system and/ or component using appropriate test sets / tools to ensure serviceability and airworthy in accordance with national regulatory, company procedures and safety requirements

Requirements:

• NITEC/Higher NITEC in any discipline OR
• Diploma in any discipline OR
• Minimum 3 GCE "O"/ "N"/"A" Level (Passes in English/Maths/Science)
• Passionate in working on aircraft and technical work
• Singaporean only

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Key Responsibilities

• Incident Handling: Perform trouble shooting via detailed analysis of HW and SW failures with the usage of all available diagnostic tools. This includes repair of HW on component level, cleaning and adjustment of mechanical components and configuration and installation of SW.
• Preventive Maintenance: Perform routine checks according to documented preventative maintenance procedures and refill consumables as directed.
• IMAC/R: Perform Installation, Movement, Addition, Change and Removal of hardware and software products and components as directed.
• Customer Training: Instruct and train customers on usage and operation of installed HW and SW.
• Process Tasks: Receive briefing for incidents and orders from dispatch function. Update dispatch function of all unforeseen issues. Provide detailed debriefing on all performed activities. Proactively inform customers about performed actions.
• Continuous Improvement Process: Observe technical or process problems at all times, proactively inform about potential problems and offer improvement suggestions if possible.
• Actively use corporate tools and processes for knowledge sharing, e.g. knowledge base to find solutions and provide input for it.
• Training: Participate in regular hardware and software trainings (on the job, classroom trainings and web-based trainings) according to the corporate training concept and receive certification after passing relevant test.

Required Qualifications

• Proven track record of more than 1 year Service Technician with banking/retail experience.
• Successfully completed education in IT- or mechatronic/electronic-related profession.
• In individual cases it is possible to assign the job to an employee, if the essential professional knowledge is acquired by work experience.
• PC literacy and good knowledge and application of the relevant tools and methods.
• Product knowledge of relevant industry and basic ITIL skills preferred.
• Ability to lift and move heavy loads, stand most of the day, climb, bend and stoop while working on equipment.
• Acceptance of exposure to the outside elements.
• Shift adaptability, which would include an on call rotation for evenings and weekends.
• Exceptional customer service skills are needed.
• Ability to organize and inventory truck stock parts and tools.
• Sense of urgency, organizational skills, professional presence and work in team environment.
• Ability to pass MVR, background and drug test where required.

Preferred Qualifications

• Firstline or Service Technician work experience preferred.
• Vocational/Trade School preferred