We are seeking a Maintenance Engineer with a focus on security and CCTV systems to ensure the smooth operation and maintenance of our security infrastructure. You will be responsible for installing, troubleshooting, maintaining, and repairing security systems, including CCTV cameras, access control systems, and alarm systems, ensuring they are fully functional and secure.

Responsibilities:

• Install, configure, and maintain CCTV systems, including cameras, recording devices, and related infrastructure.
• Perform regular maintenance checks and troubleshoot any issues related to security systems.
• Conduct system inspections and provide repairs or replacements as needed to ensure system reliability.
• Monitor and maintain access control systems to safeguard restricted areas.
• Ensure that all security systems are compliant with industry standards and best practices.
• Respond to security system alarms, analyze events, and provide recommendations for system improvements.
• Document all maintenance activities, service reports, and system configurations.
• Stay updated with the latest security technologies and trends to ensure systems remain secure and efficient.

Qualifications:

• A graduate in Engineering, Electronics, or a related field (or equivalent experience).
• Knowledge of security systems, including CCTV, access control, and alarm systems.
• Experience with CCTV camera installation, configuration, and troubleshooting.
• Basic understanding of networking and IP-based security systems.
• Ability to work independently and as part of a team.
• Strong problem-solving skills and attention to detail.
• Excellent communication skills and ability to document technical information clearly.
• Must be willing to do OT and standby when necessary.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Description:

• Plan and carry out preventive maintenance throughout the hotel to ensure that standards are maintained for guest comfort.
• Assist the Chief Engineer in the general administration, training and coaching within the department.
• Ensure the smooth daily operation in the department through supervision, delegation of duties and coordinate all engineering activities within the Hotel.
• Ensure the preventive/ corrective maintenance for all the hotel’s facilities are done promptly.
• Conduct routine checks and log data of all facilities, following up on faults and repair works if required.
• Perform property/ room preventive maintenance inspection and update.
• Perform incident investigation and prepares report.
• Source for quotations and prepare purchase requisitions for spare parts and repair works.
• Maintain the tidiness of the store, workshop and check on the tool inventory.
• Ensure that all spare parts are available for use whenever required and proper storage of supplies & materials.
• Maintain fire-fighting facilities and equipment in compliance to the Fire Safety regulation.
• Perform regular energy/ defect analysis and be involved in energy management.
• Keep up to date on safety-related administrative documents.
• Ensure his/her own safety and the safety of others during interventions and those of the external service providers.
• Be available to carry out emergency maintenance work outside of normal working hours, as required for: full power failure, evacuation fire system re-set and / or failure of mechanical systems.
• Maintain records of repair work and daily checks as required by the local Council, § Government and Manufacturer specifications.
• Support the co-ordination of safety and security/risk management programs via third party providers
• Work with the operational Department Heads team to ensure InterREACT tracking and compliance
• Ensure health, safety and welfare of all ambassadors is provided for through implementation of integrated occupational safety and health program.
• Ensure the external areas of the hotel are neat and tidy and maintained in line with Company brand standards.
• Strive to honour the Accor Vision and demonstrate active use of Accor Values.
• Any other reasonable request within your range of competence as required by Management.

Job Requirements:

• Engineering Diploma and at least 2 years of experience in a similar role.
• Computer literate.
• Good command in English language.
• Passionate, energetic and self‐motivated individual who can deliver exceptional performance.
• Strong interpersonal and communication skills.
• Able to work well with teams and demonstrates excellent leadership.

Key Responsibilities:

• Perform routine maintenance on security systems (CCTV, access control, alarms, etc.).
• Provide 24x7 standby support for emergency system issues and breakdowns.
• Troubleshoot and repair security hardware, software, and network components.
• Assist with installation and setup of new security systems.
• Document all maintenance activities and system performance.
• Conduct preventive maintenance to minimize downtime.
• Ensure compliance with safety standards and regulations.

Requirements:

• 2–4 years in maintaining security systems products (CCTV, access control, alarms).
• Hands-on experience with security systems maintenance.
  Knowledge of networking and system configurations.
  Ability to troubleshoot and repair electrical/electronic systems.
• Willing to work 24x7 shifts and be on-call.
• Relevant security or networking certifications (optional).

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Our client is a renowned security solution provider that delivers turn-key solutions. They have carved a reputation for themselves and are committed to developing their people through continual career development training.

They are seeking an Infrastructure Maintenance Engineer to join their growing team

Job Description:

• Implement, maintain and administer network, OS, storage and backup
• Collaborate on system development tasks to include design, implementation, integration and testing
• Provide on-call, 24x7 support for systems on a rotating basis. Implement corrective procedures to resolve production problems and minimize unplanned system outages
• Create and maintain programmatic and technical documentation to ensure efficient planning and execution
• Coordinate with external parties and customers for problem resolutions

Job Requirement:

• Knowledge of IT Infrastructure such as OS & network
• Passionate in new technology and keen to pick up new skillsets
• Good team player and ability to work independently
• Able to manage stakeholders
• Candidates with one or more of the following skillsets will have an advantage:
• Skill in Networking or CCNA
• VMware NSX
• Virtualization (VMware, VSphere)

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Location - West (Lift / Escalator Industry)

Summary

Perform preventive and corrective maintenance works on equipment.

Standby duties as required to ensure equipment functions properly and safely.

Responsibilities

• Carry out preventive maintenance works according to the schedule.
• Perform corrective maintenance works as needed.
• Adhere to safety work procedures.
• Ensure proper use and storage of tools.
• Maintain proper work behavior while on duty.
• Perform standby duties when required.
• Follow up on breakdown reports and assist the Standby Section as necessary.
• Report all team-related matters to superiors.
• Carry out other duties as assigned by superiors.
• Maintain proper records of works carried out in relevant reports.
• Attend building or equipment inspections as required by law (e.g., BCD, FSB).
• Assist in conducting investigations of damages or accidents involving equipment or personnel.
• Follow up on Quality Control (QC) and Quality Assurance (QA) defects.
• Ensure compliance with Environmental Policy, including waste reduction and pollution prevention.

Requirements:

• Own transport is a must ($325 vehicle allowance)

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with thousands of engineers globally supporting projects. They have an international presence worldwide and are looking out for Maintenance Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio

Working hours: Monday to Friday, Standard Office Hours (Occasionally require standby after office hours)

Responsibilities:

• Perform corrective maintenance works for Card Access System, CCTV System, Networks, Windows/Linux Servers and Integrated Security Systems.
• Ensure that deployed system functionalities are in working condition.
• Provide onsite support for integrated security systems
• Perform routine maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements.
• Collate reports and checklist of PM works for billing purpose and CM works report for filing.
• Monitor spare parts availability to support and meet downtime of system.
• Monitor the end-of-life or end-of-service for equipment installed.
• Co-ordinate with sub-contractors and customer on site matters, work schedule and quality of work.
• Support contract administration works (Ordering, billing milestone, O&M submission, Operation Manual submission, maintenance checklist and asset list).
• Assist A&A work/ Variation Order work for sites during maintenance cycle

Requirements:

• Min. 2-3 years working experience in maintenance for security systems and servers
• Min. NITEC in Building Maintenance / Engineering fields
• Proficient in troubleshooting for CCTV, Door Access and Alarm systems
• Have performed 24/7 standby work before

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

JOB RESPONSIBILITY

The incumbent will be responsible for the maintenance of all manufacturing machinery and plant equipments in the entire plant to ensure that work is being performed efficiently in accordance to the specifications and normal engineering practices.

• Carry out diagnose of problems and repair manufacturing machinery and robot
• To maintain and/or build manufacturing machinery and plant equipment
• To assemble machinery tooling
• Carry out preventive maintenance to ensure performance consistency according to process specifications
• Ensure high level of preventive maintenance programs are implemented and strive for high uptime and reduce repair time
• Good in planning and carry out inspection and maintenance activities within the plant
• Liaise with contractors in terms of repair works
• Maintain 5S
• Undertake any other duties as assigned by superiors from time to time

JOB REQUIREMENT

• NITEC/Diploma in Electrical/Mechanical/Mechatronics Engineering
• 2 years experience in plant/equipment maintenance in manufacturing environment
• Familiar with tools such as Drilling, Cutting and Grinding machines, welding, apparatus, jig saw, electrical tools, hand tools and meters, an added advantage
• Knowledge of local safety requirements, an added advantage
• Ability to work under tight deadlines and self motivated
• Good knowledge and experience in Electrical with analytical and troubleshooting skills is desire

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Job Descriptions:

• Perform installation, maintenance, and repair of compressors/pumps.
• Conduct routine inspections and diagnostic tests to identify issues.
• Troubleshoot mechanical and electrical problems to ensure optimal performance.
• Maintain accurate records of service activities and repairs.
• Collaborate with team members to improve service efficiency and customer satisfaction.
• Adhere to safety protocols and best practices while working on equipment.
• Provide technical support and training to clients as needed.

Requirements:

• Min 1 - 2 years of experience in servicing of compressors/pumps or similar industry

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with thousands of engineers globally supporting projects. They have an international presence worldwide and are looking out for IT Maintenance Technicians to join their team and contribute to their ongoing success.

Location: Ang Mo Kio

Working hours: Monday to Friday, Standard Office Hours (Occasionally require standby after office hours)

Responsibilities:

• Perform corrective maintenance works for Card Access System, CCTV System, Networks, Windows/Linux Servers and Integrated Security Systems.
• Ensure that deployed system functionalities are in working condition.
• Provide onsite support for integrated security systems
• Perform routine maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements.
• Collate reports and checklist of PM works for billing purpose and CM works report for filing.
• Monitor spare parts availability to support and meet downtime of system.
• Monitor the end-of-life or end-of-service for equipment installed.
• Co-ordinate with sub-contractors and customer on site matters, work schedule and quality of work.
• Support contract administration works (Ordering, billing milestone, O&M submission, Operation Manual submission, maintenance checklist and asset list).
• Assist A&A work / Variation Order work for sites during maintenance cycle

Requirements:

• Min. 2-3 years working experience in maintenance for security systems and servers
• Min. NITEC in Building Maintenance / Engineering fields
• Proficient in troubleshooting for CCTV, Door Access and Alarm systems
• Have performed 24/7 standby work before

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with thousands of engineers globally supporting projects. They have an international presence worldwide and are looking out for Maintenance Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio

Working hours: Monday to Friday, Standard Office Hours (Occasionally require standby after office hours)

Responsibilities:

• Perform corrective maintenance works for Card Access System, CCTV System, Networks, Windows/Linux Servers and Integrated Security Systems.
• Ensure that deployed system functionalities are in working condition.
• Provide onsite support for integrated security systems
• Perform routine maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements.
• Collate reports and checklist of PM works for billing purpose and CM works report for filing.
• Monitor spare parts availability to support and meet downtime of system.
• Monitor the end-of-life or end-of-service for equipment installed.
• Co-ordinate with sub-contractors and customer on site matters, work schedule and quality of work.
• Support contract administration works (Ordering, billing milestone, O&M submission, Operation Manual submission, maintenance checklist and asset list).
• Assist A&A work / Variation Order work for sites during maintenance cycle

Requirements:

• Min. 2-3 years working experience in maintenance for security systems and servers
• Min. NITEC in Building Maintenance / Engineering fields
• Proficient in troubleshooting for CCTV, Door Access and Alarm systems
• Have performed 24/7 standby work before

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with thousands of engineers globally supporting projects. They have an international presence worldwide and are looking out for Maintenance Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio

Working hours: Monday to Friday, Standard Office Hours (Occasionally require standby after office hours)

Responsibilities:

• Perform corrective maintenance works for Card Access System, CCTV System, Networks, Windows/Linux Servers and Integrated Security Systems.
• Ensure that deployed system functionalities are in working condition.
• Provide onsite support for integrated security systems
• Perform routine maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements.
• Collate reports and checklist of PM works for billing purpose and CM works report for filing.
• Monitor spare parts availability to support and meet downtime of system.
• Monitor the end-of-life or end-of-service for equipment installed.
• Co-ordinate with sub-contractors and customer on site matters, work schedule and quality of work.
• Support contract administration works (Ordering, billing milestone, O&M submission, Operation Manual submission, maintenance checklist and asset list).
• Assist A&A work / Variation Order work for sites during maintenance cycle

Requirements:

• Min. 2-3 years working experience in maintenance for security systems and servers
• Min. NITEC in Building Maintenance / Engineering fields
• Proficient in troubleshooting for CCTV, Door Access and Alarm systems
• Have performed 24/7 standby work before

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Mondays to Fridays, 8am to 5pm

Saturdays, 8am to 12pm

Working location: 23 Changi South Ave 2

Singapore 486443.

Scope of work:

• Ensure cleanliness of internal spaces eg. office, meeting / function rooms,lobby etc.
• Vacuuming and mopping of floor
• Cleaning of toilets
• Cleaning of pantry
• Collect and dispose rubbish

Requirements:

• Understands and speaks basic English
• Some experience will be a plus
• Medically fit to work
• Responsible
• Positive attitude

Remuneration: $1740 onwards

Interested applicants, please contact us at 93713648 (office) or 86602259 (Charina).

Mondays to Fridays, 8am to 5pm

Saturdays, 8am to 12pm

Working location:

23 Changi South Ave 2

Singapore 486443

Scope of work:

• Perform cleaning of compound areas, carparks, drains, walkways, turf areas, water features etc.
• Sweeping and mopping of lobby
• Collect and dispose rubbish
• Perform other duties as assigned.

Requirements:

• Understands and speaks basic English
• Some experience will be a plus
• Medically fit to work
• Responsible
• Positive attitude

Remuneration: $1740 - $2060

Interested applicants, please contact us at 93713648 (office) or 86602259 (Charina).