• Provided first/second level trouble shooting & resolve production stoppages due to equipment issues.
• Monitoring and control facilities equipment.
  Replenished production material where applicable in the respective workstation.
• Performed process control checks where applicable.
• Participated in preventive maintenance & calibration checks for production and measuring equipment as scheduled
• New production line setup and fit-out works.
  Utility setup and equipment move-in, move out document submission.
  In charge for facilities equipment and maintenance of compressor & exhaust system, HVAC, ACMV

Requirements

• Min Nitec in Mechanical Engineering
• Min 2 years experience in Manufacturing/Semicon Company
• Strong experience in HVAC/ACMV

Interested candidates who wish to apply for the advertised position, please APPLY with an updated copy of your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Successful candidate will be under general supervision by Field Commissioning Engineers/Discipline Leads, to assist in the coordination of the Commissioning Technicians in the Commissioning activities on Process, Topsides, Marine and Turret systems.

You must be capable to demonstrate a full understanding of all applicable policies and work methods associated with assigned duties to commission and maintain instrumentation equipment and to perform other duties as required.

The Senior Technicians shall have minimum ten years of relevant industrial experience, five years of which shall have been in oil and gas or petrochemical industries, including extensive previous commissioning experience on FPSO projects. They will be fully conversant with the applicable National / International Codes and Standards. He/She must be able to perform a variety of commission, troubleshoot and repair of various electrical equipment including, but not limited to, MCC’s, VSD’s, distribution panels, motors, lighting and small power circuits.

Duties and Responsibilities

As for the Discipline Technicians with additional responsibilities as described below:.

• Communicate clearly and precisely.
• Understand the need for and adherence to the Permit to Work and Lock-Out Tag-Out Procedures.
• Understand and follow safe working practices.
• Follow oral and written instructions.
• Be instrumental in the preparation, lodgement and implementation of all relevant Permits.
• Be directly responsible for the preparation, planning and execution of the daily commissioning activites.
• Co-ordinate the technicians activities.
• Establish and maintain positive and effective working relationships with supervisors, fellow workers and vendors.
• Coordinate activities with other departments.
• Ability to supervise workers to assist in commissioning.
• Assist in providing training for less experienced personnel.
• Good timekeeping practices.
• Preparation and submittal of MC and PC dossiers for handover to operations.
• As Building of documents and drawings.

EEHA (Ex) Qualifications

Preference will be given to Senior Technicians that hold current qualification in line with the requirements of IEC 60079-14 for installation, inspection and commissioning of EEHA equipment. These qualifications shall include the following:

• IECEx units Ex 001, Ex 003, Ex 006, or
• AS/NZS 4761.1 units 2.2, 2.4, 2.5, 2.6; or
• CompEx units Ex-01, and Ex-03

• A service technician, or skilled service worker, is responsible for providing technical repair and service work either in a facility or in the field. These professionals may install and service a wide range of hardware depending on the technician’s specific industry. Service technicians may work on vehicles, heavy machinery and home appliances or in many other areas where complex hardware needs to be maintained or fixed. Their responsibilities include diagnostic review, repair and replacement of parts as well as the replacement and installation of equipment.
• Installing new hardware and complex products while ensuring that they work correctly and safely
• Educating the hardware users about the correct use and upkeep of their products
• Repairing broken-down or damaged equipment either in the field or at a diagnostic and repair center
• Assessing hardware and installation functionality and preparing reports about maintenance and repair work that they have performed
• Persuading customers to invest in necessary replacements or vital repairs to key components and hardware devices
• Handling customer relations in a professional and friendly manner
• Explaining complex installation, diagnostic and repair issues in a way that’s accessible to a nontechnical audience

Key Highlights

• Exposure in the government sector
• Location: City Hall
• Working Hours: Mon- Fri (office hours)
• Salary:  Up to $3100/month
• Duration: 12 months

Key Responsibilities

• Oversees building maintenance and inspections by conductiong regular building inspections
• Manages outsourced facility vendors and coordinates with departments for smooth operations.
• Assists in budgeting and procurement.
• Liaises with users for project requirements and supports building revamp projects.
• Ensures projects are on time and within budget.
• Tracks project milestones and maintains records.
  

Requirements

• Min Diploma in Real Estate, Facilities Management or Engineering with at least 2 years of experience in facilities management
• Working experience in facilities management or project management is a plus
• Familiar with government procurement policies will be advantageous

Interested candidates please click "Apply Now". We regret to inform you that only shortlisted candidates will be contacted for further discussion.

Chok Kah Hwa

Outsourcing Team

BGC Group Pte Ltd

EA Licence Number: 05C3053

Reporting to the Building Manager, you will assist to provide guidance to a team of Technical Executives. You will be involved in provide facilities management services for our clients' site. This includes preventative maintenance, pest control, horticulture, security management, etc through our appointed term/ sub-contractors. You will investigate, check and analyse reported breakdowns & faults to determine their cause for the prevention of future occurrences. You may be required to supervise upgrading projects.

• Diploma / Degree in Building Services Engineering / Mechanical / Electrical or equivalent
• Min 5 years’ of relevant working experience
• Familiar with preparation of payment certificates and government procurement processes
• Pro-active, independent, able to work with minimal supervision and perform under pressure
• Good communication and interpersonal skills
• Service orientated mindset

Summary

This role is to service and repair material handling equipment and provide good customer service to ensure customer satisfaction.

Job Description

• Analyse, diagnose and rectify issues on material handling equipment.

• Carry out electrical, electrical and hydraulic repairs on equipment and components.

• Perform scheduled preventive maintenances.

• Perform modification, commissioning works.

• Undertake Supervisor’s Instruction

• Perform stock take

• Provide support and guide new colleagues

• Attend trainings

Requirements

• Strong Electrical, mechanical, hydraulic knowledge

• Good computer skills

• Able to speak and write English for handling English speaking people

• Diploma in Electrical / Electronics / Mechatronics / Automotive

• At least 2 years’ experience in the technical field such as MHE, cranes, marine equipment, industrial vehicles.

Location: Biopolis

Duration: until 30 Jun 2024

Mon-Fri office hour

1. Routine laboratory testing on raw materials or finished products, media preparation and non-routine testing (special projects)

2. Set up and maintain bacteria culture and mammalian cell culture based on available SOP/ protocols.

3. Perform various microbiology, cell-based and biochemical/ molecular biology in vitro and ex vivo assays for various projects

4. Perform routine lab housekeeping

Requirement

• Min. Diploma in Science or related disciplines, microbiology background will be preferred.

• A team player with out-going personality, a passion for research and is detail-oriented at work.

• Good organizational, communication and coordination skill to multi-task and meet deadlines as needed.

• Possess intermediate skills in Microsoft Office suite of software

• Having prior knowledge in Life Sciences (Molecular Biology, Cellular Biology, biochemistry etc.) will be an advantage.

If interested, please email me at [email protected]

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Responsibilities:

• Analyze technical inquiries and evaluate client specifications
• Establish technical, application, and process design support.
• Prepare a quotation, including technical specifications and cost estimates for equipment or solutions, tailored to customer needs and budget.
• Develop a technical presentation for the customer.
• Communicate with the manufacturer or a representative to obtain an estimate.
• Collaborate with the draftsman to create the layout and process flow diagram or flowsheet.

Requirements:

• Min diploma in Mechanical, electrical, chemical or it’s equivalent
• At least one year related sales experience
• Prior sales experience in processing equipment/system is an added advantage
• Good communication skills

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• General workshop duties as assigned by the Workshop supervisor which may include:
• Assist with mechanical equipment repairs, overhaul & maintenance.
• Assist with other ongoing projects/jobs as and when required depending on need.
• Maintenance of workshop equipment
• General housekeeping and 5S duties.

Requirements:

• Previous work within a workshop environment.
• Mechanical competence.
• Good command of English both verbally and written.
• Basic computer skills.
• Can work both independently and as a team.
• Physically fit.
• Work flexible hours on occasions.

5 days work week

Tuas Area (Co. Tpt pick at Boon Lay MRT & CCK MRT)

Marine Engineering Co.

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Company’s Profile

As a market leader in industrial vehicles, they have over 4 decades of experience in the automotive industry. They lease many high-end vehicles to their 41,000 customer base and have been customers’ first-choice partner for many years. They are currently looking for a forklift technician to value-add to their business.

Location: Pioneer

Working Hours: Mon – Fri, 8.30am – 5.30pm

Responsibilities:

• Servicing and repair of material handling equipment i.e. diesel and electric fork lift / MHE
• Troubleshoot and rectify MHE issues
• Other tasks as assigned by workshop supervisor

Requirements

• Possess Class 3 Driving License
• Bonus if have 1 year of experience in electrical / diesel forklift OR experience in automotive / industrial equipment repair

Your recruiter for this job: WhatsApp Celine @ 84940873 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Interested candidates may apply directly as well. For more job opportunities, follow SnatchJobs on Telegram: https://t.me/sgfulltimers

Celine Chan | R21103433

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Jobs Description

- Meeting rooms Set Up

- Beverage Requests and Set Up

- Catering Support

- Event Support

- Kitchen support such as washing of glasses and utensils, stock taking, cleaning of refrigerator and microwave, sanitizing of tables, clean the coffee maker machine, maintain cleanliness of kitchen and more

Requirement

- Able to read and write good English

- Able to use computer and use microsoft words and excel

- Able to read and reply email

- Need to work overtime (OT) or weekends when there is event. There will be overtime pay if requested to work

- Physical fit to handle strenous and busy schedule

- Working Hours : Monday to Friday - 7am to 5pm and 8am to 6pm - depends on shift

- Location : CBD Area

Job Responsibilities & Duties

• Assist to execute daily production control activities, such as Production Scheduling, Line Balancing and manpower planning.
• Assist to execute daily quality control activities, such as Adherence to all SOP requirements as per respective regulatory guidelines GMP, Halal, GDP Medical Device & Therapeutic products.
• To ensure documentation and records are proper and complete.
• To ensure housekeeping & cleaning of the production equipment’s and facilities are completed.
• To carry out production activities as per production operators and hand packers.
• To execute maintenance activities.
• Any other duties assigned by superior / management.

Key Performance Indicators

• Ensure daily production targets are carried out and timely and accurately
• Ensuring all documents and records are accurate and complete.
• Ensure production equipment’s and facilities are carried out daily.

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Mission

The Avionic Technician realizes maintenance operations on avionic equipment (radio communication and navigation systems, radars, altimeters, CDU, MFDU, etc.) while continuously optimizing TAT and costs and respecting quality, security and environmental procedures.

Main Activities

1. Intervention Scope

• He/She acquaints himself/herself with the maintenance operations to be undertaken to the work order and the customer’s order.
• Control, test and measure as required by the working documents (CMM, internal repair method) by using appropriate metrological tools (millimetres, spectrum analysers, oscilloscopes, specific avionic test benches, ATC, DME ADF, etc.).
• Inform the Engineering department of abnormalities.
• Disassemble equipment in compliance with the constructor’s documentation and the CMM (Component Maintenance Manuel).
• Wash and strip the equipment’s parts.
• Elaborate with the coordinator a technical quotation for the refurbishing of the equipment: workforce, materials and delays.
• Replace defective element, repair and reassemble the equipment in compliance with the CMM.
• Transmit the equipment file to Certifying staff.
• Establish for each phase of the process, the needed documents for the repaired equipment’s traceability.
• Clean-up work space
• Any other duties as assigned

Job requirements:

• NITEC/Diploma in electronics
• Experience in maintenance in the aeronautical industry will be appreciated.
• Knowledge aeronautics documentation (CMM, SB…)
• Knowledge of the procedures in aircraft component repair
• Knowledge in electronics and micro-mechanics.

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Carry out repair and routine maintenance duties on equipment, building facilities and offices, building systems, grounds, and structures
• Coordinate efforts with company’s contracted HVAC vendors to ensure company HVAC systems are functioning perfectly
• Perform inspection, maintenance, repairs, and installation of air conditioning systems, including D.D.C. building control and pneumatic systems, cooling systems, refrigerators, ice machine, refrigerated water coolers, and similar equipment
• Carry out maintenance checks on heating, ventilation, and air conditioning systems; clean evaporator drain pans, coils, and filters; lubricate fan and motor bearings; repair and change motors, electrical wiring, belts, compressors, thermostats, fans, floating elements, and defrost timers
• Place airflow controls to occupants’ preference by adjusting dampers, splitter, diffusers, and fans speeds; take away, clean, and change filters and strainer; remake, repair, and paint metal and wood cooling fans and towers; add the right amount of chemicals to water towers to prevent corrosion and rust
• Run equipment, observe its operation, and read instruments and gauges, including Volt-ohm meters; find out temperature gauges and adjust mechanisms, including valves, pumps and controls to direct levels of fluid, temperature, and pressure; charge with specified types and amount of refrigerant, and bleed contaminants from systems; inspect gauges and carry out periodic preventive maintenance checks
• Carry out overhauling and servicing of refrigeration units by repairing, changing, or reworking broken parts of compressors, condensers, and vacuum pumps; inspect Freon level in refrigeration units and fix any leak observed, and charge units as required; clean and change filters on ice machines and similar equipment; inspect heating elements and change if bad
• Salary will be decided based on working experience

Nitec (Intermediate) / Certificate of Vocational Training / BCA Builder Certificate / NTC Grade 3 or equivalent

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Address: Lavender

Working hours: Monday – Friday 9am-6pm

Salary: up to $2400 (budget able to stretch with experience)

Job Description

• Handle Service and repair cases of ear pieces, In-The- Ear (ITE) Hearing Aids, Behind-The-Ear (BTE) Hearing Aids

• Handle Urgent custom made ear piece order

• Provide Support in logistics (i.e Packing)

• Trimming/ Filling Ear mold

• Need to perform soldering work

• Quality Check and testing of all out-going instruments

• Scanning Ear impression for custom made ear mold and ordering from Vietnam

• Maintain housekeeping for safe working environment

• Any other ad-hoc duties assigned by the supervisor

Interested candidates, do submit your resume to: [email protected]
Telegram me at @jocelynchan

Jocelyn Chan Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence number : 99C4599 Personnel EA License: R1331820 [email protected]

Responsibilities

• Responsible for setting and operating CNC Machines
• Responsible for performing preventative maintenance on product equipment
• Responsible for performing other duties as and when required

Requirements

• Min Nitec in Engineering
• Min 1 years of working experience in Precision/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Work Location : Pasir Ris

Work Hours: Monday to Friday : 7.00am to 4.30pm

Contract Period: 1 March 2024 to 28 February 2025

Job Responsibilities:

MAIN ADMINISTRATIVE DUTIES:

These duties will form the bulk of the job, and will include the following:

• Working together with ICT Manager in the procurement process of Audio Visual (AV) equipment, including requests for quotations, evaluation and advising the relevant personal on the recommended procurement, including technical specifications and market pricing.

• Oversee maintenance and organisation of AV equipment and infrastructure to ensure its long term serviceability.

• Provide recommendation of new AV equipment that will meet school’s long term development needs.

• Support ICT Manager in project management (AV systems related) with external suppliers, partners & relevant school staff for timely & cost-effective project delivery according to the required standards.

• Assist ICT Manager in maintaining accurate & regular progress reports and documentation related to AV Assets and ICT projects.

• Assist ICT Manager in planning & management of AVPA assets & resources, including loan, replacement & condemnation.

• Maintain school owned ICT devices, working in tandem with MDM solutions, and support staff and students in the loan and use of mentioned devices.

• Monitor availability of AV peripheral stock (consumables/non-consumables).

• Work with the Applied Learning Programme committee to provide technical support in the form of AV recording

• Provide 1st line of AV support for all student and staff-related programmes, activities & meetings held in school.

• Oversee the management, serviceability & updating of the school’s digital signage system.

SECONDARY DUTIES:

These duties will include, but not limited to, the following:

• Support AVPA CCA IC during the execution of school related events in terms of AV requirements.

• Support the school Operations Manager in matters relating to:

• Fault reporting of AV & General equipment

• Maintenance and upkeep of the AV equipment

• Engagement and working with vendors to facilitate the repairs and maitainence of AV & General equipment

Job Requirement :

Relevant experience and qualification in the area of

o Audio Visual Systems (e.g. lighting, sound, multimedia and staging systems) and/or

o Multimedia Technology (e.g. broadcasting equipment, multimedia editing)

• ICT skills in the use of MS Office suite (Word, Excel, PowerPoint) and Google Workspace (Docs, Spreadsheet, Slides) for administration and video editing

EA : 22C1322 EA Personnel : R23115755

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Assist in operations on ground as and when required

- Any other related duties assigned by manager

Our client is a one of the leading players in the FMCG industry. Due to business needs, they are now recruiting a Automation Technician to be part of their Logistics team to support their business needs. They are located in the West - easily accessible.

Job Description :

• Oversee the testing, operation, and upkeep of automated machinery.
• Sustain the performance and reliability of all automation and network systems within the automation layer.
• Analyze equipment reliability using error logs, event reports, and data from computerized maintenance systems.

Requirements:

• Min Nitec in Mechatronics, Engineering, or a related field
• Experience with automation control products such as Siemens IPC, PLC etc.
• Comfortable with rotating day and night shifts

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Shift Allowances Given (Day - $5; Night - $20)

Responsibilities:

• Attend to operation needs of customers or customer-appointed vendors
• Basic administration on the facility booking system
• Observe and execute the security duties
• Coordinate with Stakeholders whenever required
• Be familiar and follow the Company’s Policies and Procedures
• May be asked to switch to night duties on planned occasions

Requirements:

• Minimum - ’O’/’A’ Levels
• 1 year of working experience as Facilities Admin is prefered
• Must be comfortable with travelling between Bendemeer & Toh Guan
• Ability to work with minimal supervision.
• Willing to take up other duties during off peak hours
• Competencies: Customer focus, Composed and Basic Coordination skills.
• Experience: Security duty, Administrative tasks, Customer Service (Customer Facing)

Should you be interested in this position, please contact Terence at +65 9645 4048 your resume directly for fast respond.

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R23116141 Le Cong Thang

Our Assistant Facilities Manager is responsible for the daily maintenance of the school campus and related safety aspects. They ensure that all aspects of the school physical plant are running safely and efficiently. This role will manage the relationships with our external service providers. A successful candidate will be an experienced team player who brings enthusiasm and a proactive mindset.

Key Responsibilities:

• Responsible for overseeing and maintaining all building management systems.
• Oversee and manage a planned preventive maintenance schedule, undertaking the responsibility of maintenance work with safety as a priority and avoiding any school operations.
• Manage staff and resources assigned..
• Responding appropriately to emergencies or urgent issues as they arise and dealing with the consequences.
• Ensure appropriate quality, workmanship and compliance
• Ensure that Health and Safety standards at work are understood, implemented and maintained by all team members and sub-contractors, as well as communicated to staff.
• Manage relationships with all specialist contractors and sub-contractors.
• Coordinate projects related to facilities from planning, installation to completion and use including obtaining the required permits and approvals in carrying out the activities.
• Assist to ensure campus health and safety is maintained and in compliance.
• To assist in facilities’ procurement.
• Identify any unsafe condition in the workplace; recommend measures to remedy the unsafe conditions and implement measures.
• Actively participate in the school’s safety committee.
• Review and update Health and Safety documentation and ensure compliance.
• Registered Fire Safety Manager (FSM) for the school.

Safeguarding:

• Abide by the school safeguarding policy and keep abreast of any changes.

Qualifications/Skills

• Diploma in Electrical / Mechanical / Building Services or equivalent.
• At least five (5) years of relevant experience in managing similar facilities or in a school setting.
• Practical experience in using BMS
• Experienced in ACMV
• Certified Fire Safety Manager or willing to attend certification training
• Possess good communication skills, both verbal and written.
• Quick to learn in a new environment

To apply, please email the following documents to [email protected] before the application closing deadline.

• A completed NLCS application form (which can be found on the school website)
• A Cover Letter, stating your suitability for the role
• A copy of your Curriculum Vitae (CV)

Please note incomplete submissions will not be processed and only shortlisted candidates will be contacted for interviews.

Responsibilities:

• Install, repair, and maintain refrigeration systems, including refrigerators, and some others prism products.
• Diagnose and troubleshoot system issues, including mechanical, electrical, and refrigerantrelated problems.
• Repair or replace faulty components, such as compressors, condensers, evaporators, motors, and fans.
• Perform regular preventive maintenance on refrigeration systems to ensure optimal performance and prevent breakdowns.
• Conduct system tests to verify performance, temperature control, and refrigerant levels.
• Calibrate temperature controls, thermostats, and pressure switches as needed.
• Follow safety protocols and guidelines to ensure a safe working environment.
• Adhere to relevant regulations, codes, and industry standards for handling refrigerants and electrical systems.
• Maintain accurate records of repairs, maintenance activities, and parts inventory.
• Provide excellent customer service by addressing client inquiries and resolving issues promptly.
• Stay updated with advancements in refrigeration technology, industry trends, and best practices.
• Collaborate with team members and contractors to complete projects and assignments.
• Any other ad-hoc duties as assigned by superior/or managery.

Requirements:

• Min O-Level or equivalent. Relevant certifications or vocational training is a plus.
• Min 2 years’ experience as a Refrigeration Technician or similar role.
• Strong knowledge of refrigeration systems and components.
• Familiarity with electrical systems and troubleshooting techniques.
• Ability to read and interpret technical manuals and diagrams.
• Excellent problem-solving and analytical skills.
• Detail-oriented with a strong commitment to quality and safety.
• Excellent communication and customer service skills.
• Ability to work independently and under pressure.
• Valid Class 3/3A driver's license or equivalent SG driving license.