• Application of chemical and/or physical testing methods and standard operating procedures.
• Responsible for installing new instruments, developing new methods and validating methods.
• Prepare quarterly, monthly and special reports based on analytical chemistry work papers and/or measurement methods.
• Conduct investigations and report any abnormalities in laboratory measurements.

Requirements:

• Minimum bachelor’s degree in chemical Process or equivalent.
• At least 2 years of working experience in semiconductor or manufacturing.
• Thorough knowledge of analytical methods, preferably in trace metals analysis.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Assistant Production & Logistics Manager

Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm

Location: Jurong Island (Company transport provided near Jurong East MRT)

Salary : $5000 -$7000 + $250(Allowance)

The Assistant Production & Logistics Manager assists the Production & Logistic Manager in the management of the Production department and Plant operation.

Responsibilities

• To support Production Manager in leading Production & Logistics department to ensure safe and stable operation in Daily, GCM (grade change maintenance) and SDM (Shut down maintenance) operation and planning.
• To follow up with Technical and Maintenance department on critical mechanical or E&I issues that impact plant safety, quality, and reliability.
• To lead in managing the Local and Global CARs (Corrective Action Request) relating to Safety, Quality, Reliability and Stable operation matters under Production and Logistics department and manage to ensure CARs are well followed.
• To lead and support capex related matters from Production team. Capex matters include planning, proposal, study, Hazop, commissioning and evaluation in each of the Capex planning phases.
• To support and lead in new production grade trial operation with the trial planning, manpower arrangement, coordination with other various department and in house contractors to ensure smooth operation during the trial.
• To assist or lead Global MOC relating to raw material planning, new specification changes, and packaging design changes.
• To participate and support Production & Logistics Manager in providing information and evidence during HSEQ, Stable Operation, LQA, and Budget preparation, including to make investigation summary or report.
• To undertake special assignments or projects as directed by the Production & Logistics Manager.

Requirements:

• Diploma or Degree in Chemical Engineering.
• Minimum 5 years of related working experience in Production, Operations etc. in the Chemical industry.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is actively searching for a Head, of Production (Certified Master Butcher)

If you are a dynamic individual seeking a new career opportunity, read further!

The responsibilities of this role are:

• Responsible for production of all products within the company.
• Oversees the coordination and management of effective and efficient resource allocation and cost through multi-skilling and multi tasking and ensuring its profitability.
• Expected to uphold high standards of hygiene and food safety at all times
• Conduct checks to minimize any wastage and spoilage. Prepare a recommendation plan to reduce the occurrence.
• Conduct audit check on the production process to ensure proper cleaning, cutting , disjoining , boning and trimming of beef, veal , pork , chicken and turkey are carried out.
• Conduct random check on ingredients / raw products received from suppliers to ensure that the received products meet the minimum requirements in quality and temperature as per regulations.
• Ensure proper handling, cleanliness and maintenance of the butchery, cold rooms, materials and equipment .
• Ensure that all associates adhere to hygiene policy and standards the relevant regulatory authorities set and HACCP guidelines.
• Work with QC team and Purchaser in selection of raw materials from suppliers
• Work with Purchaser to monitor the monthly inventory record to ensure that it is accurately maintained and reported .
• Review processes with QC team and purchaser to ensure continuous improvement
• Quality assessment of inprocess and finished products
• Record and document recipes and food preparation for future reference and for use to train and transfer knowledge to the team .

The ideal candidate will need to have the following qualities and experience:

• Certified Master Butcher preferable ( qualify certificate from Austria, Switzerland and Germany)
• Preferable ten (10) years of working with Ham, sausages and marinated products ( pork & chicken )
• Competent working knowledge and experience in the HACCP program
• Experience managing a large ham and sausages production facility
• Solid knowledge and skills in ham and sausages production processes and recipe

An exciting career awaits the right candidate! Click "Quick Apply" to register your interest now.

All applicants' CV will be treated with the strictest confidentiality. We regret to inform that only shortlisted candidates will be contacted.

Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products
• Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products
• Uses basic engineering and DFx principles to estimate and reduce manufacturing and/or product costs and improve delivered product quality; determines time standards and makes recommendations for tooling and process requirements
• Writes and releases test procedures
• Gathers operational and test data and evaluates results
• Evaluates work methods, procedures and policies
• Assists in determining root cause analysis for issues that arise during assembly and/or test of systems

Requirements

• Bachelor in Engineering
• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline
• Applies general knowledge of business developed through education or experience
• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments
• Works within standardized procedures and practices to achieve objectives and meet deadlines
• Exchanges straightforward information, asks questions and checks for understanding

* Please apply with detailed CV with current and expected salary, and notice period

* Only shortlisted candidates would be notified

As part of Group expansion, we are looking for a dynamic Sales Manager to be part of the expanding team. You will be responsible for sourcing new clients, promoting our services and clinch new deals. You will also be an integral part supporting of the Group’s strategic expansion and initiatives.

If you are looking to develop your career in producing construction machinery, manufacturing and marketing of construction equipment; send in your application now!

Job responsibilities

• Report to General Manager of Engineering, you will formulate and implement business plans and promotions with customers to maximize profitability.
• Source for new business leads
• Lead negotiations with trade partners, build and maintain contact with key personnel to encourage continued business development.
• Prepare and develop monthly department meeting, quarterly reviews, annual plans, long term plans, and ongoing customer profitability.
• Build and maintain strong collaborative key customer relationships.
• Deliver monthly and annual Sales goals.
• Promote company’s new and existing products and its brands into appointed market and increase market awareness and share.
• Be the master of your own schedule, prioritizing time spent visiting accounts in order to meet and exceed monthly sales goal.

Job Requirement:

• Degree in Business Admin / Marketing / Marketing communication
• Minimum 3 years’ relevant sales experience in Construction or Machinery industry
• Excellent understanding of the full sales & marketing mix.
• Strong analytical skills and data-driven thinking.
• Up to date with latest trends and sales & marketing best practices.
• Advanced communication and interpersonal skills.
• A team player and capable of putting a positive spin on the brand.

Career Category

Job Description

Associate Manufacturing I

Amgen Singapore Manufacturing, Singapore

HOW MIGHT YOU DEFY IMAGINATION?

Amgen is one of the world’s leading independent biotechnology companies. For over 4 decades, Amgen has pioneered biotechnology breakthroughs, to bring state-of-the-art medicines from laboratory to the patient. Amgen has not only discovered and developed innovative human therapeutics, but has invested in cutting edge manufacturing capability and support services to deliver these exciting therapies to medical teams around the world. Japan and Asia Pacific (JAPAC) is the fastest growing region in Amgen. Now we are hiring an Associate Manufacturing I in Amgen Singapore Manufacturing.

Associate Manufacturing

Live

What you will do

• Perform solution and equipment preparation, raw material and single use parts dispensing for manufacturing processes in mammalian cell culture and purification processes.
• Involve in hands-on execution of the plant operations and assist Manufacturing Associates in troubleshooting.
• Monitor and analyze processing parameters for atypical trends and improvement opportunities.
• Perform solution and equipment preparation.
• Perform raw material and singe use parts staging and dispensing with additional logistical support responsibility.
• Stage components for autoclaving and washing.
• Perform filter integrity testing of sterilizing filters.
• Perform environmental monitoring of classified manufacturing cleanroom
• Support in-process testing of production samples, prior experience with analytical instrument will be a plus point.
• Actively support continuous improvement initiatives
• Support Safety audits
• Adhere to any applicable EHS requirements
• Regulatory knowledge
• Understanding of analytical methods
• All listed tasks and responsibilities are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Win

What we expect of you

Qualifications

• Bachelor’s degree and 2 years of directly related experience OR
• Associate’s degree and/or 4 years of directly related experience OR
• High school diploma / GED and 6 years of directly related experience
• Ability to adhere to regulatory requirements, written procedures and safety guidelines
• Ability to evaluate documentation/data according to company and regulatory guidelines
• Ability to interact with inspectors (internal and external)
• Ability to interpret and apply Good Manufacturing Practice (GMP) knowledge
• Basic statistical mathematical skills
• Ability to organize work and handle multiple priorities and meet deadlines
• Ability to understand, apply and evaluate basic chemistry, biology and physical principles

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Your selection for this role will may be subject to fulfilling the medical requirements of this job scope. If so, you will be informed of the medical check(s) that you may need to undergo. All medical related expenses incurred from this medical check shall be borne by the company.

Apply now

for a career that defies imagination

In our quest to serve patients above all else, Amgen is the first to imagine, and the last to doubt. Join us.

careers.amgen.com

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.

about the company:

My client' is a prominent microscope manufacturer, they specialize in optical microscopes and related equipment for microscopic specimen preparation.

• Type: Permanent
• Salary: $1600-$2200/month
• Location: West (company transport provided)
• Working hours: Mon to Fri – 8am – 5.30pm

Responsibilities:

• Manual sub-assembly using hand tools
• Meet daily output KPIs
• Cleaning lenses/prisms with specified chemicals
• Involvement in prism contacting

Requirements:

Manufacturing / Assembly experience

Familiarity with manual assembly tools

Lens / Prism cleaning experience

If you are interested in the position , kindly send your CVs in to gracelyn.teo(@)randstad.com.sg or +65 98254517

We regret that only shortlisted candidates will be contacted

(EA: 94C3609/ R21101213 )

Job Description:

Must-Have Skills:

1. Programming language/framework: Java, Spring MVC, MySQL.

2. Hands-on experience in Linux & Shell.

3. Hands-on experience in SQL.

4. Hands-on experience in AWS services.

5. Experience in using ITSM tools.

6. Experience in Release Management activities.

Good to have skills:

1. Knowledge of Airline Domain.

2. Knowledge in Splunk & Datadog.

Responsibilities:

1 Responsible to handle coverage support (24x7 mobile support) and provide permanent solution / workaround depending on the nature of issue.

2 Collaborate with interface teams to troubleshoot any interface issues and provide resolution.

3 Collaborate with Business users and stakeholders to understand and troubleshoot issues and provide resolution.

4 Work with Infrastructure / Cloud operations teams for any change requests, issues, patching activities etc.

5 Perform deployment & release management activities.

6 Collaborate with development squad to provide insights for defect fix by providing analysis performed.

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

• Coordinate with Company logistics activities and oversee business plans at the regional level.
• Lead the Logistics and Landing Storage and Delivery (LSD) function and participate in the strategic planning of logistics solutions.
• Promote Asia-Pacific standard process and strategy of Supply Chain within NSC/Factory
• Analyze logistics costs and (KPIs) for guiding to actions for achieving target.

Requirements:

• Diploma in Logistics or equivalent
• At least 3 years of experience in Freight Forwarding, Logistics or Shipping industry.
• Proficient in MS Office.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Industry: Manufacturing
Location: Tuas
Working Hours: 5 days (Mon- Fri) 0715 to 1600
Company transport provided
Salary UP $2000 + Attractive bonuses

Job Responsibilities

• Masking and demasking on PCB or related product to meet customer requirements.
• Inspection, fixturing, pack and etc under supervisor’s instruction and arrangement.
• Work under air conditional room environment and no standing is required.
• Able to work under scope requirement.
• Able to work OT as per instruction or arrangement.
• Production maskers may also be asked to keep records of their output and compare it with a production schedule.

Job Requirement

• Ability to do repetitive tasks
• No experience is welcome to apply
• On the job training provided

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified. Please send your updated CV to [email protected]

EA Personnel: Wong Kaili (Kylie)

EA Registration No.: R21100484

People Profilers Pte Ltd
20 Cecil St, #08-09, PLUS Building, Singapore 049705
EA Licence Number: 02C4944
Tel: 6950 9749

about the company:

My client' is a prominent microscope manufacturer, they specialize in optical microscopes and related equipment for microscopic specimen preparation.

job summary

Responsible for troubleshooting and ensuring efficient production output.

job details:

• Location: West (company transport provided)
• Working hours: Mon to Fri – 8am – 5.30pm
• Salary range: Up $2800
• Permanent

Responsibilities:

• Build and deliver instruments
• Follow prescribed methods for cable routing, electronics installation, and mechanical assembly.
• Analyze, and address standard work problems.
• Identify daily technical issues and collaborate with engineers to resolve priority concerns.
• Guide and provide technical support to Specialists.

Requirements:

• NiTEC/Diploma in Engineering (Mechanical, Electronic, Electrical).
• Minimum 2 years of relevant experience in manual assembly operations/manufacturing.
• Proficient in using manual hand tools such as screwdrivers, torque wrenches, and Allen keys.
• Possess expertise in addressing challenges through the application of various Problem Solving Methods, including Fishbone analysis

If you are interested in the position , kindly send your CVs in to gracelyn.teo(@)randstad.com.sg or +65 98254517

We regret that only shortlisted candidates will be contacted

(EA: 94C3609/ R21101213 )

• Enhance equipment capacity and verify it while improving operational productivity.
• Establish planning parameters for short-term and strategic planning.
• Monitor and address near-term production bottlenecks.
• Create scheduling strategies for the shop floor to meet throughput goals.
• Collaborate with Production to control dispatch points for seamless production flow.

Requirements:

• Degree in Industrial Engineering or equivalent.
• Minimum 2 years of experience in relevant field.
• Strong understanding of manufacturing and logistics processes, systems, and manufacturing industry product costing.
• Proficient in Microsoft Office and SAP.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• 1 year contract (Renewable)
• MNC
• Attractive Benefits
• Completion bonus

Responsibilities

• Assist Production Scheduler for the Singapore Site.
• Assist in production planning for manufacturing sites, including production scheduling and raw material supply planning, taking into account of the product quantities to be manufactured and production datelines.
• Stand in for scheduler to liaise with Customer Service Representatives and IBP team pertaining to customers requirements / deliveries.
• Inventory Management for Raw and Packaging Materials.
• Assist in purchasing all chemicals (raw materials) and packaging materials (drums/IBCs) for production.
• Assist to manage SAP transactions pertaining to production.
• Production Scheduling/Planning
• Stand in for production planning and ensure raw material availability based on Demand Forecasts provided by IBP team.
• Communicate and liaise production schedule to the Operations. Stay on top of the production schedule adherence to deliver Production OTIF (on-time, in-full).
• Supporting customer related enquiries as well as working closely with Customer Service Representatives on daily basis.
• Assist in scheduling and purchasing all raw materials/packing materials, non-stock items and services for the site. This includes monitoring raw materials arrival to ensure timely delivery to eliminate impacts on production schedule adherence.
• Work with 3rd Party Logistics pertaining to all movements on raw / packaging materials between Singapore port, plant and 3rd party warehouse
• Assist in managing and controlling finished products inventories
• To maintain safety stocks on raw / packaging materials as when required
• Have monthly/bimonthly meeting with Supply Chain to monitor stock inventories and to maintain at targeted inventories levels
• Manage all monthly stock inventory count and handle all inventories recording in SAP. Work with Operation to resolve all discrepancies found and ensure verification of all items that may impact inventory accuracy. Manage stock reconciliation report and handle all stock reconciliation transaction in SAP.
• Manage all sampling request to support business growth.
• Work with CSR, Logistic team, operation, QC and 3rd party vendor to ensure sample are available at the right time and deliver on time.
• Handles entries of Process Orders (POs) and other SAP data entry related to manufacturing plant, ensuring Production OTIF > 90%.
• Generating STOs and DNs for transfer of material from point to point.
• Create purchase order for direct/indirect materials.
• Maintain all MRP planning parameters in SAP.
• Support New Products run in Singapore plant. Work with Demand Chain for Product code creation/extension in SAP.
• Overall in charge of external tolling (product packing) instructions and coordination.
• Prepare, facilitate and monitor Intermediates and packaging materials needed for the drumming activities.
• Manage and work with 3rd Party Logistic on lease tanks activities transportation, loading, washing, tank testing, tank returning.
• Vendor creation for onboarding.
• Create purchase order for non-direct material and servicing and perform GRN on regular basis.
• Any ad hoc administrative matters as assigned to.
• Be involved in a participative in site HSE&S efforts. This may include but not limited to involvements in LSR, BBS, SAQ, safety committee, incident investigation, ERT, safety inspections, internal/local audits, HIRA, hazard studies (HAZOP) and others as deemed necessary by the site management for the continual improvement of site HSE&S performance.

Requirements

• Minimum Diploma holder with minimum 3 - 5 years relevant working experience in a petrochemical/chemical manufacturing facility.
• Good organizational, interpersonal/people and communication skills.
• Proficiency in SAP & MS Office Applications.
• Awareness of ISO9001, ISO14001, OHSAS18001 and other applicable management systems is preferred.

Interested applicants may wish to email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified.

Cindy Char Sin Yi

[email protected]

EA License Number: 02C4944

Registration Number: R1765345

People Profilers Pte Ltd

Tel: 69509736

20 Cecil St, #08-09, PLUS Building, Singapore 049705

Our Client

Our client is a well-known leader is in the Electronics | Manufacturing space. They are currently looking for a Legal Counsel to be based in Singapore which will be part of a team.

Role and Responsibilities:

• Supports all legal business matters pertaining to the APAC region
• Provides a variety of general corporate and commercial legal services to a number of in-house clients and legal APAC community
• Acts as an advisor on legal issues involving the organization’s government and regulatory compliance
• Reviews legal data and advises organizations on appropriate legal action to be taken
• Coordinates and monitors the legal matters handled by outside counsels and ensures the legal panel is updated based on the needs of the regional organization
• Advises and supports on general corporate and commercial matters, including corporate governance and organization, drafting transactional documents, digital product license terms and conditions, commercial law, employment law, immigration law, intellectual property and technology law, data privacy, competition law, tax law, risk management,, contract management, and dispute resolution
• Supports of the APAC Legal Leaders Forum in terms of driving agenda creation, organization and planning

To Qualify

• A recognized degree in Law
• Significant corporate experience with min 2 -5 years of legal experience gained in-house or in practice with a reputable law firm.
• Ability to work well under pressure

If you're interested in this role, click 'apply now'

If this job isn't quite right for you but you are looking for a new position, please contact us [email protected] / +65 6645 4540 for a confidential discussion on your career.

License No: 11C3510 / EA Reg ID: R1658237

• Application of chemical and/or physical testing methods and standard operating procedures.
• Responsible for installing new instruments, developing new methods and validating methods.
• Prepare quarterly, monthly and special reports based on analytical chemistry work papers and/or measurement methods.
• Conduct investigations and report any abnormalities in laboratory measurements.

Requirements:

• Minimum bachelor’s degree in chemical Process or equivalent.
• At least 2 years of working experience in semiconductor or manufacturing.
• Thorough knowledge of analytical methods, preferably in trace metals analysis.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

about the company

My client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Performs the set-up, calibration, testing and troubleshooting of equipment
• Responsible for Calibration and Repair of electronic boxes
• Setting up of tape & reel cum inspection machines.
• Prepare, setup and qualify machines
• Machine assembly
• Prepares technical reports summarizing findings and recommending solutions to technical problem
• Machine alignment, teaching and test run

skills & experience required

• Diploma / Higher NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering
• Relevant internship / working experience in cleanroom / front end equipment manufacturing / semiconductor environment will be a plus
• Able to read basic engineering drawings
• Comfortable to be hands on and also with daily documentation & administrative
• Understand machinery automation with electrical, servo, sensor, pneumatic system
• Able to read mechanical drawings and measurement tools, perform I/O check and trouble shooting
• Training given to candidate with no experience
• Willing to work around Ang Mo Kio / Kallang / Lavender area

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Tower Research Capital, a high-frequency proprietary trading firm founded in 1998, seeks a Production Trader to join one of its trading teams in Singapore. As a Production Trader, you will play a crucial role in day to day monitoring of all the automatons trading across all the Asian Markets.

Responsibilities

• Monitoring morning/evening maintenance operation
• Intraday monitoring of all the trading automatons: internal KPIs, Tower Risk Limits
• Ensuring intraday communication with the internal Compliance and Risk department
• Monitoring and Hedging some exposures manually
• Providing feedback and analysis to quants on algo behavior to help them improve models

Requirements

• Bachelor's degree in Computer Science, Engineering, or a related field. A Master's degree is preferred.
• At least 4 years of equivalent practical experience
• Good knowledge of Asian Derivatives and Cash Markets
• Strong problem-solving skills and the ability to work in a fast-paced, collaborative and geographically distributed environment
• Excellent communication and teamwork abilities
• Good knowledge of both Equities and Equity Derivatives trading
• Experience with scripting and programming languages such as Python and Bash

Nice to Have

• Experience with workflow management and task scheduling
• Experience in Index Arbitrage systematic trading
• Specific trading knowledge in any major Asian Exchanges

Job Description:

- Contribute to IT initiatives for Antaes Asia clients

- Provide L1/L2 Application support to Front Office users

- Adhere to Service Level objective target

- Ensure adherence to Application Production Support (APS) roster in terms of mailbox, webportal and hotline

- Should take part in 24/7 production support (i.e Shifts/Weekend/Public holidays)

- Escalate timely to Head of APS on possible risks, escalation matters and management issues.

- Review and create application Support knowledge articles

- Contribute to the continuous improvement plan

- Contribute to the promotion of Antaes services on top of assistance provided to clients

Job Requirements:

- At least Bachelor’s Degree in Computer Science, Engineering or related fields

- Total 5+ years of overall IT experience with 1+ year experience as L2 support

- Analytical and Problem-solving skills

- Excellent communication skills along with a customer/user-centric mindset

- Willingness to continually update and enhance skills in systems and processes through own efforts and trainings

- High level of persistence, can-do attitude & pro-activeness

- Good command of ITIL practices, Unix OS, SQL, Middleware (Tomcat, MQ), Software architecture

- At least basic command of Kubernetes, Autosys or Any scheduling system, Shell or Python, Jira and Service Now

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Thoroughly observe SPC parameters and control charts.
• Implement measures to enhance tool capability performance.
• Investigate quality issues and conduct initial troubleshooting.
• Escalate unresolved problems to the Supervisor and Technology Engineers.
• Manage the dispatch of products to the tool.

Requirements:

• Diploma in engineering or equivalent.
• 2 years of working experience in the related field.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

about the company

My client is a specialised manufacturer serving in the semiconductor market. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Handle shipping activities locally and internationally
• Liaise with couriers and manage freight forwarders
• Work with various departments including planning, order admin and procurement to ensure smooth operation flow
• Support store activities such as receiving, kitting, issuing, picking, packing, dispatching, cycle count, data entry

skills & experience required

• Diploma / Higher NITEC / NITEC in Engineering / Logistic / Supply Chain / O level certificate
• Min 3 years working experience in local and international shipping
• Forklift license will be a plus
• Prior experience in a manufacturing environment will be a plus
• Ability to execute import, export, cross-trade. re-export procedures and prepare related documentation
• Able to work in north of Singapore (Yishun / Woodlands / Sembawang)

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568