Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Responsibilities :

• Schedules customers’ requirements to facilitate efficient process for order fulfillment and customer service.
• Assist in facilitating cross-functional co-operation between Sales/Marketing, Engineering, Manufacturing and Logistics to meet customer delivery satisfaction.
• Ensure availability of finished products for customers as well as assist the logistics goal in meeting target inventory turns and minimize risk of obsolescence.

Requirements :

• N Level or Diploma Holder
• At least 2 years of relevant experience
• Working in manufacturing environment will be preferred
• Positive attitude and able to work in a team
• Multi-tasks and able to work under face-paced work environment
• 5 days work week (8.15am to 5.15pm)
• Transport pick-up at Bedok MRT station

Job Description

Key Responsibilities

• Intermediate knowledge of NPME role. Independently develops, implements, and releases new product BOMs for complex modules and product structure. Works with key stakeholders to develop and implement new product manufacturing, test, and sourcing strategies.
• Manages the development and validation of Operation Method Sheets (OMS) for medium complex modules.
• Performs 3D solid model virtual analysis process, including Master Layout (MLO) and Digital Mock Up (DMU). Actively participates in design reviews, providing DFA, DFAe, DFTp, ITO, and operational efficiency improvement feedback to new product development team to drive cost, quality, and cycle time goals.
• Orchestrates change requests and executes change control processes including Non Standard Requests (NSRs), Engineering Change Orders (ECOs), Change Control Board (CCB), Supplier Problem Sheets (SPSs), Engineering Specification Waivers (ESWs).
• Documents product-related issues/enhancement opportunities and performs Root Cause Corrective Analysis (RCCA). Leads the disposition and resolution of issues requiring Long Term Corrective Action (LTCA) for project/program.
• Leads the managed build process for programs/projects.
• Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers related to new product introductions.
• May perform other duties as assigned.

Requirements:

• Strong understanding of engineering principles, manufacturing processes and design for manufacturability.
• Ability to identify and solve manufacturing and production related problems effectively.
• Ability to exercise judgement based on the analysis of multiple sources of information.
• Curiosity-driven learning and improvement with engineering skills.
• Willing to adapt to changes quickly in fast-paced environment, stay updated with work process.
• Familiarity with product assembly process, and bill of material.
• Experience in model based CAD software.
• Knowledge of product development and its lifecycle.
• Ability to manage projects, set deadlines and work within constraints to complete successfully.
• Strong communication skills to collaborate with team members.

Desired Skills:

• Familiarity with various manufacturing processes such as machining, molding, casting.
• Experience as design, or new product manufacturing or manufacturing engineer.
• Advanced skills in Microsoft Office and Teams.
• Proficiency in model based CAD software.

Education:

• BS in engineering, applied physics or other related field.
• 2 to 7 years of experience is desired.

- Have experience in wholesale bread manufacturing for at least 10 years

- Work closely with the management in developing customised recipes for customers and healthier recipes

- Have an acute understanding of our bread production line and be able to respond to machinery breakdown appropriately

- Plan the production schedule

- Review production records

- Manage and train a team of 10 bakers

- Streamline processes and commission any new equipment procured

- High attendance rate and able to cover duties of absent staff at last-minute notice, including shifts at 2am, 3am, 4am, 5am, 6.30am and 8am (normal working hours).

Job Scopes

1. Automated Product Inspection Equipment (ATE) Design and Development .
2. New Product proces design and line setup.
3. Work closely with local and HQ (Japan) designers on product change requirements, plan with the local group of members,
   draft the implementation schedule to meet target date, disseminate, and finetune the schedule with production PICs for the implementation to be carried out smoothly.
4. Follow-up with related members and enforce the usage of systems developed for Operation Change tracking.
5. Understand key functions and product master setting rules of our ERP system, process-related inline systems, traceability requirements, to align the process design with the systems.

Technical Background Requirement:

Electronic/Electrical Design, Software Design & Programming

Language Requirement:

English and Japanese is preferrable

1. General and Administrative

· Uphold company’s core values and maintain a professional appearance and demeanours that reflects the company’s commitment to quality, continuous improvement and care and respect for individuals.

· Plan and coordinate with relevant team(s) to produce and prioritize jobs and, when necessary, reorganize to meet deadline changes and updates.

· Comply with all health and safety standards and workplace legislation.

· Communicate effectively with the assigned supervisor, internal teams and own team, informing and updating them regularly to guarantee that customer objectives are met and follow systems and procedures outlined in the company manuals.

2. Scope of Work

Operations Management

• Determine priorities dynamically and set planning assumptions for work-in-progress levels by products, cycle times and yields
• Manage manufacturing key metrics including loading, performance to commitments, on-time delivery and bottlenecks
• Evaluate the sustainability of manufacturing processes by preparing rough-cut capacity plans
• Improve operation planning through use data analysis.
• Analyse production efficiencies

Maximize resource utilization

• Manage material requirements planning taking into account the sales forecasts, production plans and production capacities
• Manage a balance between production requirements and manpower resources

Conform to management system requirements

• Integrate quality principles and methodologies to enhance engineering performance
• Evaluate Workplace Safety and Health management systems for compliance and improvements

Contribute to continuous improvement

• Evaluate the organization’s approach towards a lean enterprise
• Manage innovation practices in organization
• Analyse data for business insights identification
• Review manufacturing processes to reduce working capital and optimize inventory levels

Influence organizational development

• Develop on-the-job training program
• Develop workplace learning plans
• Lead change management in the organization
• Conduct interviews and make hiring decisions
• Resolve workplace grievances and disputes

Job Requirements:

• At least 6 years’ experience in production management
• Successful implementation of 5S, Kaizen, Lean Manufacturing, TQM, Lean Six Sigma advantageous
• Proficient in MS Office

Competencies:

• Technical Minded
• Hands On
• On the Ground
• Develop Staff
• Problem Solving
• Decision Making
• Communication
• Drive for Improvement
• Sense of Urgency

Job Description

· Handle sales activities/quotations for assigned account.

· Handle and grow existing customers / new development customers (Machining and contract Manufacturing) with strategic growth of 15% - 20%.

· Manage customer account status & credit control for assigned account.

· Achieve assigned sales target and consistently follow up for purchase order after quotation is submitted to customer.

· Work with cross functional departments for customer request /new RFQ as per SOP0038.

· Review order fulfilment as per SOP0039 and back-up support for sales co-ordinator in order fulfilment that enable smooth daily operations.

· Maintain & service customer satisfaction as per SOP0040.

· Review consolidation of pricing & forecasting and work with customers in fulfilling the forecast.

· Participate in weekly / bi-weekly / monthly sales call with customers with the aim to ensure business needs are on schedule and to arrest any potential / new issues by customers relating to sales and revenue.

· Understand and work with multi-level Bill of Materials.

· Collaborating with the design, production, supply chain, engineering or R & D departments of the company to determine how products and services could be made or modified to suit the needs of the customer.

· Selling on technologically and scientifically company core capabilities to covert to product sales.

· Maintain and ensure Sales and Marketing annual operating budget did not exceed per HOD prevailing directive.

· Managing close relationship with various departments taking deliveries as top priority.

· Any other ad-hoc duties assigned by the supervisor.

Requirements

· Minimum Diploma in Mechanical/Manufacturing Engineering or its equivalent

· Minimum 1 year of relevant working experience.

Skills

1. Technical and Technological Skills

· Knowledge in Navision system platform.

· Strong oral and written communication skills.

· Basic MS Office proficiency.

· Provide quality customer service that meets customer needs and expectations.

· Able to accomplish sales-related reports and presentations.

2. Personal Qualities (Soft Skills):

· Customer-focused and results-driven.

· Able to work independently or with the team.

· Good communication and interpersonal skills in building and maintaining both internal and external relationships.

· Open to explore and decipher new things for professional growth.

Production technician job duties

Production technicians fulfill several job duties during their workday, including:

• Ensuring materials are available for production manufacturing
• Inspecting and testing finished products
• Identifying problems with production or manufactured goods
• Communicating solutions for production challenges with quality assurance
• Educating coworkers on health and safety regulations
• Establishing preventative maintenance methods
• Analyzing machinery and tools to report faults or broken items
• Scheduling training sessions for coworkers and staff

Production technician work environment

The exact work environment of a production technician can vary depending on their work location and specific job duties. However, many production technicians work in manufacturing companies or factories assembling goods on the factory floor. In these general environments, they might be expected to move quickly and be on their feet for long durations, lifting heavy materials when necessary. While working in this setting, it can be important for production technicians to

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Job Responsibilities:

• Monitoring product quality throughout the manufacturing process to ensure that it meets company standards.
• Estimating the cost of labor and materials needed for each project, then submitting this information to upper management for approval.
• Overseeing work schedules and deadlines to ensure that projects are completed on time.
• Fabricate and assembles metal structures and equipment through the use of welders, cutters, shapers, CNC machines and measuring tools.
• Complete each weld to the specified standards using appropriate equipment and materials.
• Ensure quality weld and inspection for welding process.
• Interfaces with production welders to improve welding methods.
• Ensure timely delivery for every individual projects and project management.
• Optimize welding productivity and performance.
• Communicate job expectations and performance requirements to welders.
• Initiate, coordinate and enforce production, safety, and quality systems, policies, and procedures.
• Ensure that welded material and consumables meet specifications.

Job Requirements:

• High School Diploma / Vocational Certificate / Diploma / Degree in Engineering or any related field.
• Have experience is welding parameter setting for ESAB SAW Welding.
• Knowledge in WPS and QPR.
• Interpret welding symbols and technical drawings.
• Knowledge of welder and welding safety standards.
• Good mechanical aptitude, knowledge and detailing in welding technical drawings.
• Excellent problem solving, time management skills and team player.
• Self-motivated, excellent time management, planning and prioritization of jobs.

Job Description:

• Coordinate with production on daily basis to ensure high quality products are produced;
• Develop process improvements to effectively utilize equipment and materials to maximize production;
• Develop operational strategies to achieve production and quality objectives;
• To develop and maintain good lean manufacturing practices like 5S, Poka Yoke at production;
• Responsible for production tooling management;
• Perform engineering analysis to reduce downtime and improve production efficiency;
• Evaluate current production activities and make recommendations for improvements;
• Develop operating instructions and equipment specifications for production activities;
• Provides training and guidance to production technicians and operators periodically;
• Stay current with product specifications, engineering technology and production processes;
• Develop best practices to improve production capacity, and quality;
• Working closely with QA to investigate problems and perform root cause analysis and derive resolutions;
• Keeping abreast of advancements in engineering and production and sharing knowledge with co-workers;
• Any other duties assigned from time to time.

Requirements:

• Able to liase with and conduct trainings for our existing Chinese speaking employees from China and Malaysia;
• Minimum 1 year experience in Manufaturing Environment
• Minimum Qualification level: Diploma in Manufacturing Engineering or equivalent;
• Good communication, interpersonal skills, strong leadership and project management skill;
• Proficiency in MS Office;
• Knowledge in project management, engineering tools & problem-solving methodology is a plus;
• Good knowledge in injection molding is a plus.

Responsbilities / Accountabilities:

• Manage customer demand and maintain production plan in SAP system
• Drive materials to meet commitment to customer schedule and Revenue target
• Commit delivery to sales orders
• Proactive in identifying risk & Opportunities to meet revenue plan, customer delivery commit etc…. and work with cross functional team to mitigate risk to commitment
• Monitor customer demand / Supply change and work with Business Unit team to provide recommendation to meet changes in business demand
• Engage Business Unit & Global Planning team for prioritization during tight capacity situation to meet customers requirement
• Ensure SAP planning parameter (Lead time / Build strategies / planning time Fence etc ) are regularly updated
• Support dynamic change in demand & manage supply bottleneck with cross functional team (Work center planning/ Sourcing / engineering etc… )
• Ensure KPI (On Time Delivery , Commit response time , Inventory turns ) are met
• Closed collaboration with Global planning team in the phasing of NPI to mass production transition timeline to ensure smooth production ramps & mitigate risk to new business win
• Provide close loop commit tracker update to Inside Sales team & Business Unit throughout supply crisis period

Requirements:

• Bachelor’s Degree in Business Administration/Supply Chain or related field with 1 – 2 years of production planning experience
• Excellent communication skills and proficient in both English and Chinese to work with subcons and factories in different parts of Asia who are Mandarin speaking
• Excellent interpersonal skills adopting customer centric mindset
• Proficient in SAP and Excel
• Strong problem solving and decision making skills
• Independent team player and is able to work under pressure and in a fast paced environment

Please apply via our corporate website under the requisition number 6900 at http://www.qorvo.com/careers/ with a copy of your detailed resume. ​

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

· Responsible for providing hands-on support in the analysis, design, development, testing and implementation of custom web applications using Microsoft technologies and tools such as Power Platform.

· Assist the management and maintenance of on-premise and cloud-based software systems in the company.

· Providing change management, validations and testing for existing applications and software systems.

· Provide a point of escalation with support for L1 / L2 support, and liaise with external vendors for L3 support for systems.

· Participate in external and internal audit to ensure software and systems used in the company are effective and validated.

· Create and maintain documentations and compliance for data and systems with reference to industry best practices.

· Reviewing software design architecture and updating technical documents.

Perform other tasks as assigned by the supervisor.

Experience:

• 3 or more years with RDBMS and NoSQL databases
• 3 or more years of experience with object-oriented languages (Python, JavaScript, C# .etc)
• Preferred working experience in MedTech / Manufacturing Industry

Skills

• Microsoft Certified Systems Engineer (MCSE)
• Experienced in building and maintaining software systems
• Experienced with Microsoft-based stack (M365, Power Platform, Azure, Dataverse, Microsoft SQL Server, Dynamics 365 Business Central)
• Knowledge of best practices in ICT operations and systems management
• Excellent problem solving and troubleshooting skills
• Process orientated with great documentation practices
• Communication skills, especially for translating technical concepts to non-technical business leaders
• Ability to work on a dynamic, action-focused team that has concurrent projects

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

JOB RESPONSIBILITIES

· Lead new product and manufacturing transfer activities, setup of medical device service & repair facility

· Implement new production / service/ project initiative and manage budget and timeline.

· Liaise with customer on all new product development/ service & repair activities

· Perform intermediary role between Research & Development (R&D) & manufacturing and service & repair.

· Lead and provide direction to Cross Functional Team.

· Champion to lead & develop from First Article / prototypes to customer's approval.

· Work closely with Supplier Chain, Operations & Quality on supplier qualification, Process Failure Mode Effects Analysis (PFMEA), equipment qualification and process validation, establish service & repair processes

· Perform other tasks as assigned by the supervisors.

JOB REQUIREMENTS

· Minimum Degree in Engineering

· Minimum 3 years of relevant working experience

· Experience in NPI & Project Management

· Familiar with the requirement of medical device service & repair center and its operating process

· Project Management skill

· Communication and leadership skills

· Problem Solving and decision-making skills

· MS Project skill

· Process Failure Mode Effects Analysis (PFMEA) and process validation skill

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

JOB RESPONSIBILITIES

· Lead new product and manufacturing transfer activities, setup of medical device service & repair facility

· Implement new production / service/ project initiative and manage budget and timeline.

· Liaise with customer on all new product development/ service & repair activities

· Perform intermediary role between Research & Development (R&D) & manufacturing and service & repair.

· Lead and provide direction to Cross Functional Team.

· Champion to lead & develop from First Article / prototypes to customer's approval.

· Work closely with Supplier Chain, Operations & Quality on supplier qualification, Process Failure Mode Effects Analysis (PFMEA), equipment qualification and process validation, establish service & repair processes

· Perform other tasks as assigned by the supervisors.

JOB REQUIREMENTS

· Minimum Degree in Engineering

· Minimum 3 years of relevant working experience

· Experience in NPI & Project Management

· Familiar with the requirement of medical device service & repair center and its operating process

· Project Management skill

· Communication and leadership skills

· Problem Solving and decision-making skills

· MS Project skill

· Process Failure Mode Effects Analysis (PFMEA) and process validation skill