• Install, improve tools, perform maintenance, and compile alarms for equipment.
• Troubleshoot and repair equipment to minimize downtime.
• Analyze equipment failures, create pareto charts, and conduct weak point analysis for improvement.
• Lead continuous improvement initiatives for cost reduction, yield improvement, and OEE improvement.
• Prepare technical reports documenting equipment performance and activities.

Requirements:

• Minimum Degree in Electrical Engineering or equivalent.
• Having prior experience in the semiconductor industry (field of cleaning and polishing of silicon wafers).
• At least 3 years of relevant working experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Responsible to evaluate materials status of the China Contract Manufacturer (CM), Southeast Asia CM and EU CM, and monitor materials fulfilment to meet sale orders demand and forecast demand.
• Handle site inventory and Purchase Order (PO) to suppliers to avoid excess stock and make sure CM stock and Open PO with Suppliers (OPO) are able to cover the demand according to supply lead time.
• Regular checking of supplies/CM on the critical components supply schedule, manage CM proactively sourcing for alternative source of supply to ensure continuity of production.
• Develop and maintain good relationships with factories and perform as functional bridge between outsource partners and the internal stakeholders to achieve the corporate targets.

Requirements:

• Diploma in Supply Chain Management or equivalent
• At least 5 years of planning/supply chain experience in Electronics Manufacturing industry.
• Proficient in VLOOKUP and Pivot table and Power BI.
• Good knowledge in MRP/SAP system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Location : East
• Working Hours : 9am to 6pm
• Salary Range : Up to S$7,000 Per month

Responsibilities:

• Supervise and lead engineers and technicians, who work on continuous improvement program, design machinery, plan and develop projects, and oversee production and quality control.
• Lead and actively contribute to the mechanical and automation development of machinery, equipment, and automation systems.
• Supervise the mechanical and process teams, providing guidance in managing the entire development life cycle from development, budgeting, deployment, and execution of projects.
• Provide technical support and guidance to project leads and stakeholders.

Requirements:

• Min Degree in engineering or equivalent
• Relevant experience in manufacturing industry
• Experience in PLC Programming
• Strong leadership and collaborative management skills
• Able to work in fast paced environment
• Effective team player, communicator and team builder

Job ID: QY7748Y9

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9740

http://www.peopleprofilers.com

EA License Number: 02C4944
Registration Number: R1330005
Posting Personnel: Reeve Lim Kok Kiong

This is a contract position with our client.

The client is looking for Product Support Engineers withexperience in Java.

The candidate should have expertise specifically in Java based production support.

Operational Resilience Engineering provides resilience measurement and monitoring for the firm’s Important Business Services, a priority for regulators globally, with key deadlines over the next few years. Future state vision for this function is to design for resilience as we launch engineering platforms and products, share availability of critical services publicly with our clients, reduce operational loss and support costs, and continuously demise unused systems.
Heightened focus on Operational Resilience is key to our strategic theme of enhancing Engineering risk management. The measurement and monitoring of operational resilience includes:
• Defining a consistent taxonomy for Business Services, associated functions and Engineering Services
• Enabling dependency mapping of those Services to the assets they rely on, including systems, people, processes, vendors and facilities
• Creating a scenario catalog with impact tolerances/error budgets, ensuring recovery plans are in place and automating regular testing
• Maintaining a Resilience Dashboard for users across the firm to define the above, and view resulting analytics
The tooling to enable this initiative is a joint-venture between Operational Resilience Engineering, Site Reliability Engineering, Operational Risk and Resilience Metrics, Enterprise Technology Operations and Risk Engineering.
The program involves architecting and building the tooling from scratch on cutting edge technology stack that is highly scalable and performant to support 4,000+ users firmwide. The tooling is being built with the intent to be fully cloud native over the next few years, while starting in a hybrid mode using containerized deployments in view of time to market. Given the regulatory nature of the program, all the data will be modelled in the firm’s strategic data platform (Alloy) and go through data governance sign offs. Tooling will be built in tight alignment with site reliability principles to ensure a highly resilient architecture.

• Coordinate with Company logistics activities and oversee business plans at the regional level.
• Lead the Logistics and Landing Storage and Delivery (LSD) function and participate in the strategic planning of logistics solutions.
• Promote Asia-Pacific standard process and strategy of Supply Chain within NSC/Factory
• Analyze logistics costs and (KPIs) for guiding to actions for achieving target.

Requirements:

• Diploma in Logistics or equivalent
• At least 3 years of experience in Freight Forwarding, Logistics or Shipping industry.
• Proficient in MS Office.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Thoroughly observe SPC parameters and control charts.
• Implement measures to enhance tool capability performance.
• Investigate quality issues and conduct initial troubleshooting.
• Escalate unresolved problems to the Supervisor and Technology Engineers.
• Manage the dispatch of products to the tool.

Requirements:

• Diploma in engineering or equivalent.
• 2 years of working experience in the related field.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Application of chemical and/or physical testing methods and standard operating procedures.
• Responsible for installing new instruments, developing new methods and validating methods.
• Prepare quarterly, monthly and special reports based on analytical chemistry work papers and/or measurement methods.
• Conduct investigations and report any abnormalities in laboratory measurements.

Requirements:

• Minimum bachelor’s degree in chemical Process or equivalent.
• At least 2 years of working experience in semiconductor or manufacturing.
• Thorough knowledge of analytical methods, preferably in trace metals analysis.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Assistant Production & Logistics Manager

Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm

Location: Jurong Island (Company transport provided near Jurong East MRT)

Salary : $5000 -$7000 + $250(Allowance)

The Assistant Production & Logistics Manager assists the Production & Logistic Manager in the management of the Production department and Plant operation.

Responsibilities

• To support Production Manager in leading Production & Logistics department to ensure safe and stable operation in Daily, GCM (grade change maintenance) and SDM (Shut down maintenance) operation and planning.
• To follow up with Technical and Maintenance department on critical mechanical or E&I issues that impact plant safety, quality, and reliability.
• To lead in managing the Local and Global CARs (Corrective Action Request) relating to Safety, Quality, Reliability and Stable operation matters under Production and Logistics department and manage to ensure CARs are well followed.
• To lead and support capex related matters from Production team. Capex matters include planning, proposal, study, Hazop, commissioning and evaluation in each of the Capex planning phases.
• To support and lead in new production grade trial operation with the trial planning, manpower arrangement, coordination with other various department and in house contractors to ensure smooth operation during the trial.
• To assist or lead Global MOC relating to raw material planning, new specification changes, and packaging design changes.
• To participate and support Production & Logistics Manager in providing information and evidence during HSEQ, Stable Operation, LQA, and Budget preparation, including to make investigation summary or report.
• To undertake special assignments or projects as directed by the Production & Logistics Manager.

Requirements:

• Diploma or Degree in Chemical Engineering.
• Minimum 5 years of related working experience in Production, Operations etc. in the Chemical industry.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is actively searching for a Head, of Production (Certified Master Butcher)

If you are a dynamic individual seeking a new career opportunity, read further!

The responsibilities of this role are:

• Responsible for production of all products within the company.
• Oversees the coordination and management of effective and efficient resource allocation and cost through multi-skilling and multi tasking and ensuring its profitability.
• Expected to uphold high standards of hygiene and food safety at all times
• Conduct checks to minimize any wastage and spoilage. Prepare a recommendation plan to reduce the occurrence.
• Conduct audit check on the production process to ensure proper cleaning, cutting , disjoining , boning and trimming of beef, veal , pork , chicken and turkey are carried out.
• Conduct random check on ingredients / raw products received from suppliers to ensure that the received products meet the minimum requirements in quality and temperature as per regulations.
• Ensure proper handling, cleanliness and maintenance of the butchery, cold rooms, materials and equipment .
• Ensure that all associates adhere to hygiene policy and standards the relevant regulatory authorities set and HACCP guidelines.
• Work with QC team and Purchaser in selection of raw materials from suppliers
• Work with Purchaser to monitor the monthly inventory record to ensure that it is accurately maintained and reported .
• Review processes with QC team and purchaser to ensure continuous improvement
• Quality assessment of inprocess and finished products
• Record and document recipes and food preparation for future reference and for use to train and transfer knowledge to the team .

The ideal candidate will need to have the following qualities and experience:

• Certified Master Butcher preferable ( qualify certificate from Austria, Switzerland and Germany)
• Preferable ten (10) years of working with Ham, sausages and marinated products ( pork & chicken )
• Competent working knowledge and experience in the HACCP program
• Experience managing a large ham and sausages production facility
• Solid knowledge and skills in ham and sausages production processes and recipe

An exciting career awaits the right candidate! Click "Quick Apply" to register your interest now.

All applicants' CV will be treated with the strictest confidentiality. We regret to inform that only shortlisted candidates will be contacted.

Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products
• Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products
• Uses basic engineering and DFx principles to estimate and reduce manufacturing and/or product costs and improve delivered product quality; determines time standards and makes recommendations for tooling and process requirements
• Writes and releases test procedures
• Gathers operational and test data and evaluates results
• Evaluates work methods, procedures and policies
• Assists in determining root cause analysis for issues that arise during assembly and/or test of systems

Requirements

• Bachelor in Engineering
• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline
• Applies general knowledge of business developed through education or experience
• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments
• Works within standardized procedures and practices to achieve objectives and meet deadlines
• Exchanges straightforward information, asks questions and checks for understanding

* Please apply with detailed CV with current and expected salary, and notice period

* Only shortlisted candidates would be notified

As part of Group expansion, we are looking for a dynamic Sales Manager to be part of the expanding team. You will be responsible for sourcing new clients, promoting our services and clinch new deals. You will also be an integral part supporting of the Group’s strategic expansion and initiatives.

If you are looking to develop your career in producing construction machinery, manufacturing and marketing of construction equipment; send in your application now!

Job responsibilities

• Report to General Manager of Engineering, you will formulate and implement business plans and promotions with customers to maximize profitability.
• Source for new business leads
• Lead negotiations with trade partners, build and maintain contact with key personnel to encourage continued business development.
• Prepare and develop monthly department meeting, quarterly reviews, annual plans, long term plans, and ongoing customer profitability.
• Build and maintain strong collaborative key customer relationships.
• Deliver monthly and annual Sales goals.
• Promote company’s new and existing products and its brands into appointed market and increase market awareness and share.
• Be the master of your own schedule, prioritizing time spent visiting accounts in order to meet and exceed monthly sales goal.

Job Requirement:

• Degree in Business Admin / Marketing / Marketing communication
• Minimum 3 years’ relevant sales experience in Construction or Machinery industry
• Excellent understanding of the full sales & marketing mix.
• Strong analytical skills and data-driven thinking.
• Up to date with latest trends and sales & marketing best practices.
• Advanced communication and interpersonal skills.
• A team player and capable of putting a positive spin on the brand.

about the company:

My client' is a prominent microscope manufacturer, they specialize in optical microscopes and related equipment for microscopic specimen preparation.

• Type: Permanent
• Salary: $1600-$2200/month
• Location: West (company transport provided)
• Working hours: Mon to Fri – 8am – 5.30pm

Responsibilities:

• Manual sub-assembly using hand tools
• Meet daily output KPIs
• Cleaning lenses/prisms with specified chemicals
• Involvement in prism contacting

Requirements:

Manufacturing / Assembly experience

Familiarity with manual assembly tools

Lens / Prism cleaning experience

If you are interested in the position , kindly send your CVs in to gracelyn.teo(@)randstad.com.sg or +65 98254517

We regret that only shortlisted candidates will be contacted

(EA: 94C3609/ R21101213 )

Job Description:

Must-Have Skills:

1. Programming language/framework: Java, Spring MVC, MySQL.

2. Hands-on experience in Linux & Shell.

3. Hands-on experience in SQL.

4. Hands-on experience in AWS services.

5. Experience in using ITSM tools.

6. Experience in Release Management activities.

Good to have skills:

1. Knowledge of Airline Domain.

2. Knowledge in Splunk & Datadog.

Responsibilities:

1 Responsible to handle coverage support (24x7 mobile support) and provide permanent solution / workaround depending on the nature of issue.

2 Collaborate with interface teams to troubleshoot any interface issues and provide resolution.

3 Collaborate with Business users and stakeholders to understand and troubleshoot issues and provide resolution.

4 Work with Infrastructure / Cloud operations teams for any change requests, issues, patching activities etc.

5 Perform deployment & release management activities.

6 Collaborate with development squad to provide insights for defect fix by providing analysis performed.

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

• Coordinate with Company logistics activities and oversee business plans at the regional level.
• Lead the Logistics and Landing Storage and Delivery (LSD) function and participate in the strategic planning of logistics solutions.
• Promote Asia-Pacific standard process and strategy of Supply Chain within NSC/Factory
• Analyze logistics costs and (KPIs) for guiding to actions for achieving target.

Requirements:

• Diploma in Logistics or equivalent
• At least 3 years of experience in Freight Forwarding, Logistics or Shipping industry.
• Proficient in MS Office.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Industry: Manufacturing
Location: Tuas
Working Hours: 5 days (Mon- Fri) 0715 to 1600
Company transport provided
Salary UP $2000 + Attractive bonuses

Job Responsibilities

• Masking and demasking on PCB or related product to meet customer requirements.
• Inspection, fixturing, pack and etc under supervisor’s instruction and arrangement.
• Work under air conditional room environment and no standing is required.
• Able to work under scope requirement.
• Able to work OT as per instruction or arrangement.
• Production maskers may also be asked to keep records of their output and compare it with a production schedule.

Job Requirement

• Ability to do repetitive tasks
• No experience is welcome to apply
• On the job training provided

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified. Please send your updated CV to [email protected]

EA Personnel: Wong Kaili (Kylie)

EA Registration No.: R21100484

People Profilers Pte Ltd
20 Cecil St, #08-09, PLUS Building, Singapore 049705
EA Licence Number: 02C4944
Tel: 6950 9749

about the company:

My client' is a prominent microscope manufacturer, they specialize in optical microscopes and related equipment for microscopic specimen preparation.

job summary

Responsible for troubleshooting and ensuring efficient production output.

job details:

• Location: West (company transport provided)
• Working hours: Mon to Fri – 8am – 5.30pm
• Salary range: Up $2800
• Permanent

Responsibilities:

• Build and deliver instruments
• Follow prescribed methods for cable routing, electronics installation, and mechanical assembly.
• Analyze, and address standard work problems.
• Identify daily technical issues and collaborate with engineers to resolve priority concerns.
• Guide and provide technical support to Specialists.

Requirements:

• NiTEC/Diploma in Engineering (Mechanical, Electronic, Electrical).
• Minimum 2 years of relevant experience in manual assembly operations/manufacturing.
• Proficient in using manual hand tools such as screwdrivers, torque wrenches, and Allen keys.
• Possess expertise in addressing challenges through the application of various Problem Solving Methods, including Fishbone analysis

If you are interested in the position , kindly send your CVs in to gracelyn.teo(@)randstad.com.sg or +65 98254517

We regret that only shortlisted candidates will be contacted

(EA: 94C3609/ R21101213 )

• Enhance equipment capacity and verify it while improving operational productivity.
• Establish planning parameters for short-term and strategic planning.
• Monitor and address near-term production bottlenecks.
• Create scheduling strategies for the shop floor to meet throughput goals.
• Collaborate with Production to control dispatch points for seamless production flow.

Requirements:

• Degree in Industrial Engineering or equivalent.
• Minimum 2 years of experience in relevant field.
• Strong understanding of manufacturing and logistics processes, systems, and manufacturing industry product costing.
• Proficient in Microsoft Office and SAP.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• 1 year contract (Renewable)
• MNC
• Attractive Benefits
• Completion bonus

Responsibilities

• Assist Production Scheduler for the Singapore Site.
• Assist in production planning for manufacturing sites, including production scheduling and raw material supply planning, taking into account of the product quantities to be manufactured and production datelines.
• Stand in for scheduler to liaise with Customer Service Representatives and IBP team pertaining to customers requirements / deliveries.
• Inventory Management for Raw and Packaging Materials.
• Assist in purchasing all chemicals (raw materials) and packaging materials (drums/IBCs) for production.
• Assist to manage SAP transactions pertaining to production.
• Production Scheduling/Planning
• Stand in for production planning and ensure raw material availability based on Demand Forecasts provided by IBP team.
• Communicate and liaise production schedule to the Operations. Stay on top of the production schedule adherence to deliver Production OTIF (on-time, in-full).
• Supporting customer related enquiries as well as working closely with Customer Service Representatives on daily basis.
• Assist in scheduling and purchasing all raw materials/packing materials, non-stock items and services for the site. This includes monitoring raw materials arrival to ensure timely delivery to eliminate impacts on production schedule adherence.
• Work with 3rd Party Logistics pertaining to all movements on raw / packaging materials between Singapore port, plant and 3rd party warehouse
• Assist in managing and controlling finished products inventories
• To maintain safety stocks on raw / packaging materials as when required
• Have monthly/bimonthly meeting with Supply Chain to monitor stock inventories and to maintain at targeted inventories levels
• Manage all monthly stock inventory count and handle all inventories recording in SAP. Work with Operation to resolve all discrepancies found and ensure verification of all items that may impact inventory accuracy. Manage stock reconciliation report and handle all stock reconciliation transaction in SAP.
• Manage all sampling request to support business growth.
• Work with CSR, Logistic team, operation, QC and 3rd party vendor to ensure sample are available at the right time and deliver on time.
• Handles entries of Process Orders (POs) and other SAP data entry related to manufacturing plant, ensuring Production OTIF > 90%.
• Generating STOs and DNs for transfer of material from point to point.
• Create purchase order for direct/indirect materials.
• Maintain all MRP planning parameters in SAP.
• Support New Products run in Singapore plant. Work with Demand Chain for Product code creation/extension in SAP.
• Overall in charge of external tolling (product packing) instructions and coordination.
• Prepare, facilitate and monitor Intermediates and packaging materials needed for the drumming activities.
• Manage and work with 3rd Party Logistic on lease tanks activities transportation, loading, washing, tank testing, tank returning.
• Vendor creation for onboarding.
• Create purchase order for non-direct material and servicing and perform GRN on regular basis.
• Any ad hoc administrative matters as assigned to.
• Be involved in a participative in site HSE&S efforts. This may include but not limited to involvements in LSR, BBS, SAQ, safety committee, incident investigation, ERT, safety inspections, internal/local audits, HIRA, hazard studies (HAZOP) and others as deemed necessary by the site management for the continual improvement of site HSE&S performance.

Requirements

• Minimum Diploma holder with minimum 3 - 5 years relevant working experience in a petrochemical/chemical manufacturing facility.
• Good organizational, interpersonal/people and communication skills.
• Proficiency in SAP & MS Office Applications.
• Awareness of ISO9001, ISO14001, OHSAS18001 and other applicable management systems is preferred.

Interested applicants may wish to email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified.

Cindy Char Sin Yi

[email protected]

EA License Number: 02C4944

Registration Number: R1765345

People Profilers Pte Ltd

Tel: 69509736

20 Cecil St, #08-09, PLUS Building, Singapore 049705

Our Client

Our client is a well-known leader is in the Electronics | Manufacturing space. They are currently looking for a Legal Counsel to be based in Singapore which will be part of a team.

Role and Responsibilities:

• Supports all legal business matters pertaining to the APAC region
• Provides a variety of general corporate and commercial legal services to a number of in-house clients and legal APAC community
• Acts as an advisor on legal issues involving the organization’s government and regulatory compliance
• Reviews legal data and advises organizations on appropriate legal action to be taken
• Coordinates and monitors the legal matters handled by outside counsels and ensures the legal panel is updated based on the needs of the regional organization
• Advises and supports on general corporate and commercial matters, including corporate governance and organization, drafting transactional documents, digital product license terms and conditions, commercial law, employment law, immigration law, intellectual property and technology law, data privacy, competition law, tax law, risk management,, contract management, and dispute resolution
• Supports of the APAC Legal Leaders Forum in terms of driving agenda creation, organization and planning

To Qualify

• A recognized degree in Law
• Significant corporate experience with min 2 -5 years of legal experience gained in-house or in practice with a reputable law firm.
• Ability to work well under pressure

If you're interested in this role, click 'apply now'

If this job isn't quite right for you but you are looking for a new position, please contact us [email protected] / +65 6645 4540 for a confidential discussion on your career.

License No: 11C3510 / EA Reg ID: R1658237

• Application of chemical and/or physical testing methods and standard operating procedures.
• Responsible for installing new instruments, developing new methods and validating methods.
• Prepare quarterly, monthly and special reports based on analytical chemistry work papers and/or measurement methods.
• Conduct investigations and report any abnormalities in laboratory measurements.

Requirements:

• Minimum bachelor’s degree in chemical Process or equivalent.
• At least 2 years of working experience in semiconductor or manufacturing.
• Thorough knowledge of analytical methods, preferably in trace metals analysis.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

about the company

My client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Performs the set-up, calibration, testing and troubleshooting of equipment
• Responsible for Calibration and Repair of electronic boxes
• Setting up of tape & reel cum inspection machines.
• Prepare, setup and qualify machines
• Machine assembly
• Prepares technical reports summarizing findings and recommending solutions to technical problem
• Machine alignment, teaching and test run

skills & experience required

• Diploma / Higher NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering
• Relevant internship / working experience in cleanroom / front end equipment manufacturing / semiconductor environment will be a plus
• Able to read basic engineering drawings
• Comfortable to be hands on and also with daily documentation & administrative
• Understand machinery automation with electrical, servo, sensor, pneumatic system
• Able to read mechanical drawings and measurement tools, perform I/O check and trouble shooting
• Training given to candidate with no experience
• Willing to work around Ang Mo Kio / Kallang / Lavender area

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913