RESPONSIBILITIES & DUTIES

• Assist the Production Manager in the scheduling of all incoming jobs and ensure close monitoring and timely delivery.
• Assist the Production Manager in taking charge of all coating (HVOF and Armoloy) jobs and ensure delegation and coordination on the necessary works.
• Understand the full requirements of all manufacturing, servicing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Ensure all budgets and plans are met.
• Assist the Production Manager to monitor and manage workshop loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans.
• Attend weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager to work closely with all Production Supervisors to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Identify the skill level of each reporting employees and distribute suitable work tasks to achieve higher throughput.
• Manage and resolve grievances and conflicts arising. Motivate employees to boost their morale.
• Work with Production Manager, Engineering Manager, General Manager and HR department to develop, implement and conduct training to enhance the competency or upgrading of skills for production employees.
• Conduct annual performance appraisal for all reporting employees.
• Work closely with the QHSE Manager/ MR to resolve quality issues.
• Perform review on PCR and work closely with the sales, engineering and quality department or customer to clarify all technical specifications and job requirements.
• Assist the Production Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager in initiating purchase requisition for any requirements.
• Assist the Production Manager in preparing monthly reports whenever required.
• Work closely with all departments to resolve any arising issues.
• Assist the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Accountability

• Control, lead, develop and motivate all reports.
• Monitor and ensure on time delivery of finished product.
• Minimize rework and rejection rate.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.
• Report all unsafe acts, infrastructure and environment to his Manager.

QUALIFICATION & EXPERIENCE

· Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.

· Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

Job Description

• Build and maintain relationships with relevant stakeholders in assigned countries, increasing the team's understanding of the business' operations and internal control plans
• Conduct audits of the company's financial, operational, and information systems, including social compliance audit to ensure compliance with established codes, policies and procedures
• Plan and evaluate the effectiveness and adequacy of internal controls, policies, and procedures
• Identify, analyse any potential areas of risk, control gaps, and develop a risk mitigation plan and control gap remediation recommendations to the business
• Prepare and present audit reports to the management and headquarters
• Conduct presentations and training to increase awareness of governance frameworks
• Implement new audit initiatives to maintain, develop and improve internal control, risk management and governance frameworks
• Assist with the development of policies and procedures to ensure compliance with industry standards and regulations
• Any other adhoc projects assigned

Job Requirement

• Bachelor's degree in Accounting, Finance, or relevant fields and qualifications in ACCA/CPA/CIA/CISA/CFE/CCEP
• At least 4 years of experience in internal auditing, risk management
• Have had commercial and/or Big 4 internal audit experience
• Experience in the manufacturing industry would be beneficial
• Knowledge of legal and compliance will be added advantage
• Proficient in Excel, PowerPoint, or MS Office, experienced in data analytics
• Displays qualities of a proactive and team-oriented individual
• Excellent communicator with strong presentation and influencing skills
• Willingness to travel internationally
• Knowledge of ESG (Environmental, Social and Governance) strategy and corporate sustainability is advantageous.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function:

• Lead Food Safety risk assessment and quality records (QRs) for escalation on lines as per Global GMP lifecycle policy.
• Provides support and inputs to update Food Safety Policy and site HACCP.
• Provide support to the Manufacturing organization to facilitate the efficient operations within the production area.
• To optimize existing processes and to ensure that production goals are met. Ensures systems and processes to maintain GMP at workplace.
• Collaborate with Operations sub-functions in tracking critical production and cleaning parameters to track and collate responses for consumers/medical/affiliates escalations.
• Monitors performance of equipment, machines and tools and corrects equipment problems or process parameters that can produce non-conforming products.

Major Responsibilities:

• Responsible to Manage and focus directly on GMP food safety engineering/food security and validation, in preparation for the commercial production of regulated products.
• Support execution of projects related to food safety and optimization of existing manufacturing processes to deliver products with the production requirements consistent with Gold Standard Policies.
• Responsible for leak management and sanitation response during food safety events, including oversight for sanitation and verification activities.
• Ensures effectiveness of routine sanitation and cleaning activities.
• Train shopfloor technicians on food safety requirements
• Responsible to perform quality events investigation and coming up with CAPA action. Ensuring the effectiveness of CAPA action.
• Interface with other departments and suppliers to address root causes.
• Responsible to motivate and train employees for the facility and from third party as part of food safety program.
• Partner with Engineering on the installation, modification, upgrade and maintenance of manufacturing equipment. Co-Development of qualification and validation protocols.
• Execution of qualification and validation activities
• Lead incident reviews to investigate and correct microbiological non-conformities and provide recommendation regarding process design, product disposition and continuous improvement.
• Optimize the documentation for quality systems, cleaning and validation, SOPs, HACCP plans, and food safety policy and protocols.
• Ensures plant Food Safety documentation is maintained in an audit-ready state, meeting all statutory, regulatory requirements & customer expectations.
• Ensures the effective use of materials, equipment, and personnel in producing quality products at an effective operating cost.
• Responsible for compliance with applicable Corporate and Divisional Policies and Procedures.
• Prepares reports, publishes, and makes presentations to communicate findings.
• Implement, document, and maintain controlled, repeatable production processes.
• Understands the business needs of the company and has knowledge of the customer needs of our business.
• Cultivates internal and external network of resources to complete tasks.
• Any other duties as assigned by supervisor.

Requirements:

• Diploma/Bachelor’s degree in Process Engineering/ Mechanical/ Electrical/ Food Science/Biotechnology/Microbiology
• Minimum 3-5 years of related experience in quality/manufacturing/production, preferably in a GMP environment in food/pharma industry
• Able and willing to work on shift pattern (12 hours rotation shift)
• Preferably with knowledge in SAP system/POMS/MES.
• Preferably with knowledge about food microbiology, pathogens and food safety.
• Able to make fast decision and react efficiently to situation.
• Understands engineering principles, theories concepts, practices and techniques

*Kindly note this position is based in Tuas.

*This position will be working on shift pattern.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Be part of something altogether life-changing

Working at Cytiva in the Life Sciences industry means being at the forefront of providing new solutions to transform human health. Our incredible customers undertake life-saving activities ranging from fundamental biological research to developing innovative vaccines, new medicines, and cell and gene therapies.

At Cytiva you will be able to continuously improve yourself and us – working on challenges that truly matter with people that care for each other, our customers, and their patients. With associates across 40 countries, Cytiva is a place where every day is a learning opportunity – so you can grow your career and expand your skills in the long term.

Cytiva is proud to work alongside a community of nine fellow Danaher Life Sciences companies. Together, we’re pioneering the future of science and medicine, developing products that enable researchers in the fight to save lives.

We are looking for a Material and Production Planner to work with our expert Materials Management team. Do you have a passion for Materials Management? Then we would love to hear from you.

What you will do

• Maintaining inventory levels to support production and inventory targets through MRP, Min-Max and Kanban planning
• Work with RMC/Science Team to resolve raw material lot specification outliers to optimize inventory use
• Work with supervisors and manager to implement process improvements to achieve better inventory and production performance
• Identifies and resolves problems in a timely manner, gathers and analyzes information skillfully, and maintains confidentiality.
• Adapts to changes in the work environment, manages competing demands and can take care of frequent change, delays or unexpected events.

Who you are

• Bachelors degree and 1 year of supply chain experience
• Proficiency in office suites, effective time management and interpersonal skills; able to balance multiple priorities
• Excellent communication and analytical skills with the ability to manage supplier relationships
• Proven track record to execute and deliver on commitments
• Experience using ORACLE based MRP system and in a cGMP manufacturing environment preferred

About Tungray Singapore Pte Ltd

Tungray Singapore Pte Ltd, a subsidiary of Tungray Technologies Inc., specializes in providing customized manufacturing solutions for various industries across Singapore and the region. As a leading technology company, we are dedicated to delivering innovative solutions that enhance productivity and optimize manufacturing processes.

Job Description

We are seeking a highly motivated and experienced Business Development Manager to join our team. The ideal candidate will have a solid technical understanding of manufacturing solutions, a proven track record in business development, and the ability to cultivate strong relationships with clients. This role is crucial to our efforts to expand our market presence in Singapore and the surrounding region.

Key Responsibilities

• Identify new business opportunities, including new markets, growth areas, trends, and partnerships.
• Develop and implement strategic sales plans to achieve company objectives in Singapore and the region.
• Leverage technical knowledge to understand customer needs and propose customized manufacturing solutions.
• Work closely with the technical team to design and tailor solutions that meet specific customer requirements.
• Build and maintain strong relationships with new and existing clients, providing ongoing support to ensure customer satisfaction and retention.
• Prepare and deliver presentations and proposals to prospective clients.
• Negotiate contracts and close sales agreements, ensuring profitability and alignment with company goals.
• Stay up-to-date with industry trends and competitors to identify opportunities for innovation and improvement.

Qualifications

• Bachelor’s degree in Engineering, Business Administration, or a related field.
• Minimum of 7 years of experience in business development or sales, within the manufacturing sector.
• Strong technical understanding of manufacturing solutions and the ability to communicate complex technical concepts to a non-technical audience.
• Proven ability to drive the sales process from plan to close.
• Demonstrated ability to build and maintain relationships with clients and stakeholders.
• Excellent communication, negotiation, and presentation skills.
• Self-motivated, goal-oriented, and able to work independently as well as part of a team.

Benefits

• Competitive salary and performance-based bonuses.
• Opportunities for professional development and career growth.
• A dynamic work environment with a focus on innovation and continuous improvement.

Send resume to email : [email protected]

Responsibilities:

• Coordination in production planning, design & fabrication works
• Update and maintain data for production orders
• To ensure all the delivery schedules are achieved.
• Ensure the Production Schedule is promptly updated to the Production Supervisor.
• To arrange the material for Production/Assembly and record accordingly.
• Responsible for prioritizing at the cleaning station according to delivery schedule or urgent pull-in.
• Do receiving for Work in Progress & Finished Goods after QC inspection.
• Conduct periodic cycle count on WIP & Sub length stocks.
• Inform QC on any Production CAR.
• Highlight to the Senior Manager if any stocks are running low.
• Maintenance & replenishment of Production tools.
• Organize Incoming shipments – open crates & arrange them on the racks.
• Monitor general factory housekeeping.
• To update the Production status for the mass pro project.
• Ensure the product complies with ISO requirements.
• Any other duties as delegated by the superior

Requirements:

• Minimum ‘O’ Level or Professional Certificate / NiTEC
• Min 1 year’s experience in production
• Mechanical industry background preferred
• Proficiency in MS Office applications
• Good communications and interpersonal skills are essential
• 5 days a week, location in Woodlands Spectrum 1

Essential Dutie and Responsibilities:

1. To calibrate mechanical equipment, measuring instruments, electrical & electronic equipments, dosimeters, jigs & fixtures.

2. To liaise with external calibration service suppliers on calibration requirements & support.

3. To update and maintain calibration information or data in computer system and to perform PM Monitoring and Dew Point Testing.

4. To coordinate with other departments on calibration schedule so as to ensure that all relevant equipment are calibrated on a timely manner.

5. To assist Calibration Supervisor on calibration issue and preparation or revision of calibration SOPs.

6. Responsible for compliance to EHS procedure and requirement.

Qualifications/ Education:

· Diploma or NITEC (NTC/ ITC) in any discipline

· Minimum “O” level qualification or equivalent or Certified Quality Technician

Skill Set and/or Experience:

· NITEC (NTC / ITC) with at least 5 years / Fresh Diploma

· NITEC (NTC/ ITC) with at least 8 years/ Diploma + 2 years

· Computer knowledge and blue print reading

· Good Interpersonal and communication skill

Essential Duties and Responsibilities:

1. Handling of materials for production manually or using aids like PIT (e.g.: forklift, power truck, and etc) and top up of material and packing of parts.
2. Perform as a relief Operator for a short duration as and when required.
3. Cleaning of equipment - conveyor belts, air nozzles, filter etc and remove/ change materials during code change when required.
4. Filling up report/ labels - recording of components numbers, batch numbers, discarding and recording of scrap.
5. Responsible to comply with EHS/6S/GMP/SOPs and regulatory requirements.
6. Maintain good inventory control by ensuring all inventory transactions are transacted accurately and updated at all times.
7. Perform regular inventory counts, such as monthly cycle count, and annual physical count.

Qualifications/ Education:

• Primary/ Sec 2/ Sec 4 or equivalent

Skill Set and/or Experience:

• Primary education with experience
• Simple mathematics - addition, subtraction, multiplication, division
• Language proficiency: English
• PC knowledge
• Familiarity with Good Manufacturing Practices (GMP)/ Good Documentation Practices (GDP) is preferred
• Ability to operate material handling equipment eg. forklift, power truck is preferred

The Supervisor will be a vital component of the Engineering Team. He will

• Organise and Manage a team of Operator and Machinist to achieve the daily production target and quality to meet customer deliveries
• Plan, Do, Check, Action (PDCA) for your Section's Operation's Objective, Production Output, Quality, Productivity, Cost Savings & Capacity
• Willing to be hands-on as and when required
• Prepare Report and participate in Meeting

This position requires the following

1. Passion in CNC machining technology

2. 5 years working experience in supervisory level in Machine Shop Environment

3. Good Technical Sense

4. Good Working Knowledge of CNC Machine Operation & Programming. Good Knowledge of Fixture Design will be an added advantage

5. Reasonable skill level in Computer (Excel and Words)

6. Hardworking and Committed

7. Self Disciplined and Initiative

8. Self Starter and Self Motivator

9. Physically Fit, Independent and Good Working Attitude

10. Possess Good Communication Skills (Both Written & Oral)

Job Description :

• Able to read and understand shop drawing.
• To conduct quality check, pre-pour & post pour.
• Liaise with all the relevant parties for production at factory.
• Production planning according to site needs.

Requirements :

• Precast experience would be added advantages.
• Able to communicate in English.
• Minimum Diploma in Civil /Structural /Materials.

Scope of Services

The Services required are set out as follows:

Multimedia Production

• Produce multimedia content for school.

• Provide videography/photography/animation support for coverage of school events and functions and provide editing.

• Work closely with ICT Support Team (i.e., ICT Associate, Desktop Engineers on multimedia requirements and support required by staff.

Multimedia Administration

Support Teaching and Learning

• Maintain and update school website.

• Provide multimedia support (e.g., photography, video production) to facilitate the delivery of lessons and events.

• Support administration tasks for teaching and learning (e.g., Burning of DVDs/CDs, printing of media resources etc.)

• Provide technical advice in terms of multimedia hardware and software that the school can purchase to support the teaching and learning in curricular and co-curricular areas.

Other Support/Duties

• Assist ICT Associate in managing requests from staff.

• Archive, manage and organize the school’s media collection. Other duties pertaining to the area of multimedia production and administrative work when assigned.

Qualification, Skill & Experience of the Contractor’s Personnel

The Personnel shall minimally have the following qualifications, skills and experience:

Qualifications:

• Minimum requirement of a relevant ITE/Higher NITEC, or equivalent certification on Multimedia knowledge

Experience:

• At least 2 years of experience working as a Multimedia Specialist, preferably in a school context.

• Preferably have experience managing photo-taking or video-taking projects.

Technical Expertise:

• Experience in providing Multimedia Support (e.g. Photography and photo editing, Videography).

• Have knowledge to maintain and update website.

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.

• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.

• Perform and maintain the documentation of operations in accordance with cGMP requirement.

• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.

• Perform online monitoring of in process parameters / checks throughout the batch.

• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.

• Perform all activities in accordance with cGMP.

• Maintain the cleanliness of work area to ensure cGMP compliance.

• Perform all other relevant duties required to meet the schedule.

• Check relevant material and product details against batch document

• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.

• Involve in equipment / process qualification.

• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.

• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.

• Experience in tablet coating of oral solid dosage manufacturing is preferred.

• A good team player with positive learning attitude.

• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines

• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.

• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Job Description:

• Support set up of machinery to ensure on-time for mass production.
• Responsible for leading machine conversions and cleaning equipment.
• Assist in immediate breakdown restoration of machine function to achieve production output.
• Perform troubleshooting and diagnostic-based troubleshooting guide.
• Conduct on-the-job training for new production operators and technicians
• Statistical process monitoring and control lead to productivity improvements.
• Support continuous improvement initiatives toward production efficiency and quality.
• Design and fabricate simple jigs/fixtures to improve production processes.
• Carry out periodical maintenance for process machinery on schedule.
• Review process issues, and internal corrective action requests, assist in a customer complaint investigation, and conduct failure analysis.
• Assist new production introduction trial run.
• Ensure customer orders are fulfilled on time in full.
• Perform reconciliation and maintain an accurate inventory of materials and finished goods.
• Consistently adhere to good housekeeping practices and safety regulations.
• Responsible for completing and countersigning GMP documentation for traceability and submitting it to Management at the end of each processed order.
• Ensure workplace safety.
• Workplace housekeeping and cleanliness.
• Any other duties and responsibilities as assigned by the management.

Job Requirements:

• Preferably at least a Diploma / Higher NITEC / NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering.
• Able to read basic engineering drawings.
• Fluent in both oral and written English.
• Knowledge of GMP will be an added advantage.
• Good communication and interpersonal skills.
• Able to support overtime and shift.
• Systematic and able to work under pressure.
• Able to work independently.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The objective of this traineeship programme is to support mid-careerists who are looking for career switches into the Biophamaceutical industry.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. Due to the nature of this traineeship programme, kindly note that training allowances are CPF exempted. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Role Description:

As a MSAT Chemist, you can expect o plan, organise and carry out experimental work with the objective of:

• Improving existing processes on plant
• Developing and making improvements to processes for new products so as to contribute to the successful introduction of new products/ processes to the plant
• Evaluating raw materials
• Providing troubleshooting support to the operations department

Key Responsibility Areas:

• Ensure process optimization for a specific product to make improvements to processes with respect to yield, quality, output, cost savings, robustness etc. in line with Good Manufacturing Practices (GMP) requirements and ensure suitability for Secondary process performance
• Undertake troubleshooting of problems relating to the plant/ processes to ensure the effective and prompt resolution of issues/ salvage of batch/ development of novel re-work methods for treatment of substandard batches
• Ensure proper documentation and filing for a specific product (includes laboratory notebooks, technical memos, analytical raw data, risk assessments, etc.) in compliance with GMP and GLP requirements
• Supervise technicians and junior staff to ensure good and safe work practice
• Act as a product custodian and ensure the provision of first-line product-specific technical support to its customers (internal and external)
• Provide technical support for routine manufacture and to commissioning teams in the commissioning of established/ new products, as well as conduct training in process chemistry to the relevant parties
• Evaluate the quality of raw materials and intermediates to ensure that it meets company’s specifications, and liaise with external suppliers to provide feedback on the quality of materials
• Support technical, genotoxic and material risk assessment for change implementation and maintenance of the control strategy throughout product lifecycle
• Support trending and review of key process parameters and attributes as part of Continued Process Verification (CPV)
• Provide technical support for routine process decontamination activities (includes identify process residues, support cleaning risk assessment, cleaning limits calculation, support unknown peak investigation, improvement to current decontamination method, etc)

We are looking for you with below attributes:

• A degree in Chemistry or equivalent
• Experience in a laboratory environment in the pharmaceutical industry or equivalent is desired

Competencies / Skills:

• Sound knowledge of organic, organometallic chemistry
• Sound analytical knowledge
• Sound plant knowledge
• Sound knowledge of cGMP/ GLP
• Knowledge of laboratory safety and hazards
• Financial awareness
• General business awareness
• Good communication skills

Where will I be based?

You will be based at one of our manufacturing sites in Singapore near Jurong. There will be 2-way shuttle services from designated MRT locations provided for our employees.

How can I apply?

Apply via this link: https://jobs.gsk.com/en-gb/jobs/408717?lang=en-us&previousLocale=en-US

We recommend you apply as soon as possible, because we accept ongoing applications and offer positions on a first come, first served basis!

At GSK we value diversity and treat all candidates equally. We strive to make our recruitment process free of bias of any kind and aim to create an inclusive workplace at GSK. If you require any assistance, either to attend an interview or during the course of the recruitment process, please let us know.

Apply now!

Need help with your application?

Please email us at [email protected] and let us know how we can help you.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The objective of this traineeship programme is to support mid-careerists who are looking for career switches into the Biophamaceutical industry.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. Due to the nature of this traineeship programme, kindly note that training allowances are CPF exempted. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Role Description:

• Ensure all data supporting the analytical method are accurate and able to take correct actions to address the issue
• Contribute to the plans for the implementation of new testing technologies and methods
• Able to understand and assess the change analytical assessment that may have an impact on product quality, validation and/or current Good Manufacturing Practice (GMP) compliance
• Lead or participate in investigation arising from laboratory investigation, incidents recommendations remedial actions for follow-up
• Draft, review and update appropriate laboratory documents such as testing protocol, procedures, analytical methods and guidelines relating to GMP and operational framework of the laboratory
• Updated with pharmacopeial and other health agencies guidelines
• Ensures that all manufacturing raw materials / non-routine samples and products are analyzed and tested according to the stipulated quality requirements
• Understand and adhere to any applicable safety requirements
• Ability to understand basic laboratory instrument technical mechanism and method troubleshooting
• Ability to guide laboratory analyst on method improvements and basic troubleshooting
• Ability to interact with inspectors (internal and external)
• Basic statistical mathematical skills
• Ability to organize work and handle multiple priorities and meet deadlines
• Ability to work in a diverse team

We are looking for you with below attributes:

• At least a Degree in Chemistry or relevant science

What you will learn:

• Interpersonal skills
• Influencing skills
• Team leadership
• Organizational skills

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Jurong. There will be 2-way shuttle services from designated MRT locations provided for our employees.

How can I apply?

Apply here: https://jobs.gsk.com/en-gb/jobs/407825?lang=en-us&previousLocale=en-GB

We recommend you apply as soon as possible, because we accept ongoing applications and offer positions on a first come, first served basis!

At GSK we value diversity and treat all candidates equally. We strive to make our recruitment process free of bias of any kind and aim to create an inclusive workplace at GSK. If you require any assistance, either to attend an interview or during the course of the recruitment process, please let us know.

Apply now!

Need help with your application?

Please email us at [email protected] and let us know how we can help you.

About Tungray Singapore Pte Ltd

Tungray Singapore Pte Ltd, a subsidiary of Tungray Technologies Inc., specializes in providing customized manufacturing solutions for various industries across Singapore and the region. As a leading technology company, we are dedicated to delivering innovative solutions that enhance productivity and optimize manufacturing processes.

Job Description

We are seeking a highly motivated and experienced Business Development Manager to join our team. The ideal candidate will have a solid technical understanding of manufacturing solutions, a proven track record in business development, and the ability to cultivate strong relationships with clients. This role is crucial to our efforts to expand our market presence in Singapore and the surrounding region.

Key Responsibilities

• Identify new business opportunities, including new markets, growth areas, trends, and partnerships.
• Develop and implement strategic sales plans to achieve company objectives in Singapore and the region.
• Leverage technical knowledge to understand customer needs and propose customized manufacturing solutions.
• Work closely with the technical team to design and tailor solutions that meet specific customer requirements.
• Build and maintain strong relationships with new and existing clients, providing ongoing support to ensure customer satisfaction and retention.
• Prepare and deliver presentations and proposals to prospective clients.
• Negotiate contracts and close sales agreements, ensuring profitability and alignment with company goals.
• Stay up-to-date with industry trends and competitors to identify opportunities for innovation and improvement.

Qualifications

• Bachelor’s degree in Engineering, Business Administration, or a related field.
• Minimum of 7 years of experience in business development or sales, within the manufacturing sector.
• Strong technical understanding of manufacturing solutions and the ability to communicate complex technical concepts to a non-technical audience.
• Proven ability to drive the sales process from plan to close.
• Demonstrated ability to build and maintain relationships with clients and stakeholders.
• Excellent communication, negotiation, and presentation skills.
• Self-motivated, goal-oriented, and able to work independently as well as part of a team.

Benefits

• Competitive salary and performance-based bonuses.
• Opportunities for professional development and career growth.
• A dynamic work environment with a focus on innovation and continuous improvement.

Send resume to email : [email protected]

About Tungray Singapore Pte Ltd

Tungray Singapore Pte Ltd, a subsidiary of Tungray Technologies Inc., specializes in providing customized manufacturing solutions for various industries across Singapore and the region. As a leading technology company, we are dedicated to delivering innovative solutions that enhance productivity and optimize manufacturing processes.

Job Description

We are seeking a highly motivated and experienced Business Development Manager to join our team. The ideal candidate will have a solid technical understanding of manufacturing solutions, a proven track record in business development, and the ability to cultivate strong relationships with clients. This role is crucial to our efforts to expand our market presence in Singapore and the surrounding region.

Key Responsibilities

• Identify new business opportunities, including new markets, growth areas, trends, and partnerships.
• Develop and implement strategic sales plans to achieve company objectives in Singapore and the region.
• Leverage technical knowledge to understand customer needs and propose customized manufacturing solutions.
• Work closely with the technical team to design and tailor solutions that meet specific customer requirements.
• Build and maintain strong relationships with new and existing clients, providing ongoing support to ensure customer satisfaction and retention.
• Prepare and deliver presentations and proposals to prospective clients.
• Negotiate contracts and close sales agreements, ensuring profitability and alignment with company goals.
• Stay up-to-date with industry trends and competitors to identify opportunities for innovation and improvement.

Qualifications

• Bachelor’s degree in Engineering, Business Administration, or a related field.
• Minimum of 7 years of experience in business development or sales, within the manufacturing sector.
• Strong technical understanding of manufacturing solutions and the ability to communicate complex technical concepts to a non-technical audience.
• Proven ability to drive the sales process from plan to close.
• Demonstrated ability to build and maintain relationships with clients and stakeholders.
• Excellent communication, negotiation, and presentation skills.
• Self-motivated, goal-oriented, and able to work independently as well as part of a team.

Benefits

• Competitive salary and performance-based bonuses.
• Opportunities for professional development and career growth.
• A dynamic work environment with a focus on innovation and continuous improvement.

Send resume to email : [email protected]

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 5+ years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 8 years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

We are seeking an a Production Planner to join our UAV team. The ideal candidate will be responsible for planning, scheduling and coordinating production activities to ensure timely delivery of unmanned aerial vehicles (UAVs) while optimizing resources and maintaining quality standards. This role requires strong analytical, organizational, problem-solving skills and with a deep understanding of production planning and supply chain management.

Job Description:

a. Production Scheduling:

• Develop and implement detailed production schedules for UAV manufacturing, ensuring timely and efficient production.
• Adjust schedules based on changing demands, resource availability and unforeseen delays.

b. Inventory and Material Management:

• Monitor inventory levels and coordinate with procurement to ensure all materials and components are available.
• Optimize inventory levels to avoid shortages or excess stock.

c. Capacity Planning:

• Analyze production capacity and proposed allocation of resources (machinery, manpower, materials) to meet production targets.
• Collaborate with manufacturing team to ensure production aligns with available resources and equipment maintenance schedules.

d. Collaboration with Cross-functional Teams:

• Coordinate between engineering, procurement, quality assurance and manufacturing teams to ensure seamless workflow and communication.
• Work closely with program manager, quality control and procurement teams to align production with project timelines and customer demands.

e. Production Monitoring:

• Track production progress, identify bottlenecks and proactively adjust schedules to mitigate potential delays.
• Ensure that production goals are met while maintaining high standards of quality.

f. Data Reporting:

• Generate and present regular reports on production performance, inventory levels and resource utilization.

g. Quality Assurance:

• Work closely with the quality control team to ensure assmebled UAVs meet company standards

Job Requirements:

• Degree/ Diploma in either Supply Chain Management, Production/Operations Management or any related field.
• Possess 3 years of experience in production planning
• Proficiency in SAP production planning software and Microsoft Office Suite (Excel, Word, PowerPo (optional but preferred)

Job Responsibilities:

1. Closely monitor daily outputs and yield loss
2. Update data into SAP system and planner
3. Update data of dailyproduction activity into SAP system
4. Coordinate with production planner on daily production activity
5. Closing aging Production Order
6. Ensure BOM and Routing in the SAP system are accurate and update
7. Inventory control
8. Coordinate with warehouse to meet on-time delivery

Job Requirements:

1. Secondary School and above
2. Basic computer knowledge (Excel)
3. Basic knowledge of using SAP system

Job Description

• Prepare and pack high quality cuts of meats according to customer specifications using company standards and adhering to all safety requirements. Majority of time will be spent operating processing equipment.
• Operation of Meat Processing Equipment; CryoVac, MultiVacs, Dicers, Needle, Slicer, Portion Cutters, Scales,
• Pack, trim and customize portions of meat products using knives, or other meat production equipment.
• Count and stack on tray portions per customer and company specifications
• Label portion with supplied number product labels
• Set up packing and labeling area as required
• Perform end of day functions
• Actively maintain, and merchandise partial cart
• Keep packing area and cutting room and surrounding area clean and sanitized.
• Follow company GMP (Good Manufacturing Practices) to maintain sanitary conditions
• Work continually in a refrigerated environment -18 °C – 10 °C

Requirements

• Must be physically fit (able to lift cartons 10-20kg)
• Able to handle meat processing equipment safely.

Job Responsibilities·

• Keep production records including material stock records
• Coordinate and confirm goods receiving and goods outgoing documents to warehouse and QC·
• Support QC in printing and filing of COA and GHS SDS·
• Coordinate delivery orders from the customer service officers·
• Collect delivery tickets from drivers and do filing·
• Prepare a regular inventory list of goods from the GEO system·
• In charge of goods receiving and updating in GEO system
• Create Manufacturing Order and Batch Report for certain customers
• Print product labels and manage all product label templates

Job Requirement

• Education: At least GCE O/A Levels or ITE/Diploma in any field
• Proficiency in MS Office (Word, Excel, Powerpoint)
• Able to commence work on short notice or immediately

Job duties and responsibilities:

• Lead the Production Division in formulating and implementing production business plans to achieve the company goals and objectives.
• Manage and promote the company’s core values, business objectives, and targets, including the development of supporting personnel and features for the continued growth of the company.
• Induct, train, coach, and develop human resource and succession planning for the division.
• Participate and contribute actively either as the chairman or as a member of the various committees of the company or any other company-wide gathering.
• Maintain the discipline and cohesiveness of staff under charge, working towards achieving the corporate objectives. Have a nose for recognising problems.
• Need to write to internal or external customers most effectively and concisely. Conversely, must be able to converse concisely and timely.
• Coordinate and take leadership of all the managers and assistant managers who are heads of their respective departments.
• Manage and delegate work within the division sphere.
• Lead in the management and control of budgets for jobs designated to the department.
• Led and formulated plans for the expansion and improvement of the production division.
• Oversee all production and maintenance projects to the satisfaction of the client's requirements by providing technical and management guidance to production departments.
• Ensure all production department projects are planned, coordinated, and executed smoothly to meet customers’ requirements with the highest quality and EHS compliance.
• Manage and deploy production resources (manpower, material, tools & equipment, logistics, technical, etc) efficiently and productively.
• Analyse job scope and plan resources with the department heads.
• Liaise with customers on job matters.
• Manage sub-contractors.
• Chair and conduct daily production and monthly safety committee meetings.
• Approve in-house training programmes and training materials.
• Conduct in-house training for staff and when required.
• Forecast the divisional requirements.
• Communicate and carry out the management requirements to subordinates.
• Implement the company’s IMS system for continuous improvement.
• Conduct post-project performance evaluation and identify areas for improvement.
• Ensure project costs are controlled within budget and minimize wastage.
• Continuously review and improve work methods and enhance the productivity of workers.
• Conduct an internal audit and self-assessment for IMS.
• Oversee the development of production indicators, man-hour standards, work instructions, and risk assessments.
• Act on behalf of the COO in his absence.
• Perform any other duties assigned by the COO.

Minimum Requirements:

• A Degree or Diploma in Engineering.
• Minimum 3 years experience in Engineering maintenance services
• Possess strong leadership and organisational qualities.
• Possess strong written and spoken communication skills.

Job Responsibilities

• To schedule production and/or procure externally sourced materials in accordance with prevailing confirmed customer demand, ensuring material availability at finished goods warehouse.
• Day to day planning skills to keep track of, and prioritize process orders and/or purchase orders.
• Extensive planning and organizational skills to meet and satisfy customer demand over extended periods of time.
• To make scheduling and/or procurement decisions that will impact customer orders and company stocking policies.
• Day to day planning skills to ensure that raw materials, packaging will be available in time to meet production requirements.
• To continually devise improvements to systems to improve efficiency and the speed of delivery of information from the department.
• Communicate and support the QC department regarding possible material for rework and production and/or procurement changes.
• To attend and play a key role in contributing planning issues in daily and weekly meetings, providing key information in meetings to improve the efficiency and running of the plants and/or procurement process.
• Continually review the production schedule to ensure all forward demands are being met and take appropriate action to add, move or cancel production and/or purchases to minimize working capital.
• Investigate and respond to customer complaints.
• Using MRP review proposed output and make decisions on the viability of turning planned order and/or purchase requisition requirements into firm process orders and/or purchase orders.
• Ensure product compatibility is maintained
• Respond in a timely manner to Escalations taking action to schedule new production if required.
• Effectively communicate the production schedule and any issues arising from it to production, customer service, sales, and manager.
• Assist with other task assigned by manager.

Requirements:

• Knowledge of site manufacturing, processes and products.
• More than 2 years of planning experience in manufacturing environment with SAP systems
• Experience in using Epicor system will be an added advantage
• Knowledge of SAP processes in the Sales & Distribution and Production Planning modules.
• Competent user of MS Office packages.
• Ability to complete tasks to tight deadlines
• Good knowledge of Excel
• Excellent communication and writing skills. Must have written and oral proficiency in the English language.