Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.
  

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

- Design, develop, and improve sheet metal products and engineering processes

- Assist to create and review technical drawings, plans, and specifications using computer software

- Perform detailed documentation to track project development and design process

- Develop testing processes, and perform testing and validation of new designs

- Taking part in idea generation and improvement of existing products and machinery.

- Able to work with team members for the overall progress of the project and able to cope with fast paced learning environment - Prepare and perform unit beta testing and data recording

- Ability to be independent, innovative and creative

Skills and Academic Requirement:

- Bachelor's Degree/Diploma in Mechanical Engineering/Computer Engineering or in related field

- Solid Experience with AutoCAD and Solidworks

- Firm grasp of engineering concepts, and keen in designing mechanical systems and products

- Exceptional technical and problem-solving skills and reasoning ability

- Ability to communicate effectively and clearly

- Must be self-motivated and a great team player

We do not require recruitment agencies, please do not contact us. Thank you!

• Advanced CAD Skills – Proficiency in using advanced computer-aided design (CAD) software to create detailed 3D models and engineering drawings.
• Mechanical Engineering Knowledge – Strong understanding of mechanics, materials science, thermodynamics, and manufacturing processes.
• Problem-Solving – Ability to identify issues in design and find innovative solutions, considering both technical and cost constraints.
• Design for Manufacturability – Knowledge of how to design products that can be easily and cost-effectively manufactured.
• Project Management – Ability to lead and manage projects, including timelines, resources, and cross-functional collaboration.
• Finite Element Analysis – Experience with FEA tools to predict the behavior of mechanical components under various conditions.
• Communication Skills – Ability to clearly communicate technical ideas and collaborate with other teams, including engineers and manufacturers.
• Attention to Detail – A keen eye for detail to ensure designs are accurate and meet all specifications and safety standards.

Responsibilities:

Design, detailing, specification preparation and construction oversight for the full range of Mechanical packages for design and build of advanced technology and life science projects
Determining and defining sustainability targets;
Review of the design of Mechanical systems, produced by other team members, for technical compliance with specified and contracted client/customer requirements;
Formulating and driving any necessary recovery plans relating to Design,Cost &Schedule
Representing Mechanical Department in monthly HOD Meetings;
Performs monthly department meetings and provides a status update on development of projects and business development;
Informs and updates on latest technical developments and codes/ standards updates in the industry in regards to Mechanical engineering
Attend monthly HOD Meeting
Mentoring of the Lead Engineers with the intent of securing properly trained personnel to ensure the continual expansion of the company.
Establishes and updates individual competency profile for each team member;
Creates development and training plan for each direct report;
Actively manages performance (goals, action plans and key performance factors);
Establishes succession management planning;

Requirements:

Degree in Mechanical Engineering
At least 10 years of Design and Construction experience in a high-tech industry or other multiple discipline orientated construction business
Experience in implementing change strategies internally
Experience in strategic and operational planning and implementation
Experience in process and project management

Royal IHC is currently recruiting a MARINE MECHANICAL ENGINEERING TECHNICIAN for our Singapore office.

Roles & Responsibilities:

• Maintenance and Repair: Perform routine maintenance and repairs on dredging equipment, including pumps and hydraulic systems, ensuring optimal performance and minimal downtime.
• Assembly and Disassembly: Assist in the assembly and disassembly of dredger components, adhering to safety and quality standards to ensure efficient operations.
• Troubleshooting and Diagnostics: Conduct thorough troubleshooting and diagnostic assessments on various dredger systems to identify and resolve mechanical issues promptly.
• Collaboration: Work closely with engineers and operators to develop and implement effective maintenance schedules and procedures.
• Workshop Maintenance: Maintain a clean and organized workshop environment, ensuring all tools and equipment are in proper working condition and readily available. Ensure the accuracy of the inventory stored in the workshop. Conduct safety inspections and ensure all maintenance activities comply with safety standards and regulations.
• Procurement Support: Support the procurement of spare parts and materials, maintaining inventory records and ensuring timely availability for repairs. Maintain accurate records of inventory and procurement activities.
• Documentation: Accurately document maintenance activities and repairs in accordance with company protocols and regulatory requirements.

Job Requirements:

• Proven Mi. 5 years of experience in marine mechanical engineering or Marine-Shipyard field.
• Strong troubleshooting and diagnostic skills.
• Ability to work collaboratively in a team environment.
• Excellent organizational and documentation skills.
• Positive mindset with a proactive, “sure I’ll get that done” attitude.

What We Offer:

• A dynamic and supportive work environment where your contributions matter.
• Opportunities for professional growth and development.
• Competitive salary and benefits package.

Job Descriptions

• Execute design activities with customer design proposals, specifications, manuals, and other data.
• Evaluate the feasibility, cost, and maintenance requirements of designs or applications.
• Prepare and update 3D drawing and control in every issuance of drawings, in accordance with the detailing procedures and standards using AutoCAD application/ BIM Softwares.
• Study drawings and other pertinent papers for preparation for fabrication and erection drawings.
• Checking of elevation, dimension, and reinforcement of all structures as indicated in plans.
• Prepares final as-built drawings as per requirement of the client.
• Liaise with Client, Client's Consultants, Contractor, and the Design Checker to obtain approval of design and drawings.

Job Requirements

• Degree in Mechanical Engineering
• Min 5 yrs experience in Mechanical Design
• BIM,AutoCAD/Inventor/Solidwork experience, preferably in designing wiches & lifting equipment
• Good communication skill, salf motivated, and positive attitude.
• Independent and hardworking.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

Service Engineer

We are at the heart of every place that matters: as a leading global provider in the access solutions market, we enable people to move seamlessly in safe, secure and sustainable places.

Do you want your work to matter? Then join our team!

At dormakaba, more than 16,000 people from all over the world work together and grow together. If you are looking for exciting career prospects, if you want to fuel innovation and like tackling new challenges, then we would love to hear from you!

Our Singapore Service team is always on the lookout for talents and help you reach your best potential!

Role & Responsibilities

· Provide customer support for our Company’s products such as handling their enquiries with tact and courtesy.

· Perform on-site advice, installation, preventive maintenance and repairs of our Company products.

· Offer aftersales solutions and training to customers on product features, configuration, usage and maintenance.

· Proactive in informing customers of additional product and services we offer.

· Handle all essential resources, materials and equipments for effective and efficient delivery.

Key Competencies

· Good level of customer service experience.

· Good communication skills to enable interaction with internal and external customers.

Qualification:

· NITEC/ Diploma in IT/Engineering/Electrical/Mechanical/Computer-related or equivalent discipline.

· Candidates without prior working experience are welcome as on-the-job training will be provided.

· Possess a valid Singapore Class 3 Driving License.

Benefits:

· Learning culture where every employee is engaged in learning and development growth.

· Team programs and activities that celebrate individual and team’s success.

· Long service award recognition for our committed and dedicated colleagues.

· Health insurance and flexi-benefits cater for the employee’s health and wellness.

Is this you? Access your career at dormakaba today!

Diversity, Equity & Inclusion is part of our overall business and sustainability strategy. We consider all applicants equally throughout the whole recruitment process without regard to culture, age, ethnicity, gender identity, disability, marital status, language, national origin, physical/ mental ability, religion, sexual orientation, socio-economic status, underrepresented communities, etc. We do not use unfair selection methods for any of our positions, all employees are appointed based on performance and suitability for the role

Requirements:

1. At least a diploma in civil engineering and 5 years working experience in civil engineering project.

2. Must be able to co-ordinate with clients, inspectors, suppliers, workers and subcons.

3. Able to interpret drawing, able to generate shop drwing and cutting list.

4. Must be able to commit Saturday workdays.

5. Able to fulfill task with minimum supervision.

6. Ableto schedule daily work activities, deployment with workforce and resources.

7. Able to write Method of Statement adn Risk Assessment.

• Upkeep record of department equipment/assets.
• Execute both static and dynamic measurement such as dimension control and flow measurement not limiting to shore/ship tanks, piping, flow meters and instrument validation for custody transfer purposes.
• Process data collected and prepare all necessary reporting for review.
• Assist in the development and training of staff to required level of expertise.
• Ensure that all operations are conducted within client’s health and safety requirements.
• Assist in the implementation of department Quality system per the QA Manual.
• Perform any other task that may be assigned from time to time by Management.
• All jobs done in accordance to SGS Standard Procedures and/or Local Procedures where applicable.

Requirements:

• Diploma or equivalent in the field of Electrical or Electronic Engineering discipline
• Preferably 2 years of working experience
• Good computing skills and knowledge
• Possess local class 3 driving licence will be an added advantage
• Good communication, negotiation and interpersonal skills
• Good team player, works well under pressure and able to challenge status quo
• Able to work independently and to coordinate several activities simultaneously
• Able to ensure that process flow and work delivery is accurate and timely
• Able to give best customer care and services
• In addition, an added advantage for candidate who possess one or more of the following skills as follows:
• Instrumentation validation/verification/flow measurement
• Dimension control measurement via Total Station or theodolite
• Good computer knowledge in MS Office particularly Advanced Excel
• Any 3D software knowledge, autocad, etc…
• Coding or programing capability

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment in order to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures
  Witness and provide contractor resources to support FAT as required.
• Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Roles & Responsibilities:

To ensure the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To coordinate with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To manage project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience / Knowledge in in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA will be an added advantage

More than 3 years of site experience in the construction sector, preferably in the superstructure crosshead/ precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS Certification

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

1. JOB DESCRIPTION

Job Title

Marine Mechanical Engineer

Occupation

MARINE MECHANICAL ENGINEERING TECHNICIAN

Job Description & Requirements

Job Title

Marine Mechanical Engineer

Occupation

Marine Service Engineer

Job Description & Requirements

1) Needs to know troubleshooting on an engine.

2) Must be well versed with the 4 stroke engine.

3) Shore Based support to the boat issues.

4) Procurement of the spares.

5) Periodic Maintenance.

6) Must be familiar with the supply boat and launch boat industry.

7) Must have basic skills in Microsoft Excel.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Investigate and analyse incidents pertaining to rotating equipment failure or malfunction in order to identify root causes of problems and recommend & implement solutions.
• Identify, analyse and troubleshoot machinery deficiencies and make recommendation for improvement.
• Monitor and review implementation of Preventive Maintenance program to achieve high plant availability.
• Monitor Condition Monitoring program, analyse and propose recommendations for predictive maintenance.
• Establish programs and initiatives to maximize plant availability and equipment reliability

• Degree in Mechanical Engineering
• At least 4 years' experience in maintenance of plant equipment especially rotating machinery, preferably in oil/petrochemical or related industries

Roles & Responsibilities:

Involved in all aspects relating to the design and construction management of all types of civil and structural system

To lead the engineering team, carry out civil and structural engineering jobs in front end engineering design, detail engineering design

To generate project specification, design philosophy, calculation template to comply with clients’ requirements and the local authority’s requirements

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

Coordinate with sub-contractors and attend to clients' queries to ensure timely work arrangements

Involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standards

To manage project documentation and maintain accurate records

To ensure compliance with all health and safety regulations

Requirements:

Bachelor Degree in Civil Engineering/Building Construction or any equivalent qualification

Site experience on Super structure works for reinforce concrete, Steel structures and Precast structures

Experience / Knowledge in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA will be an added advantage

Minimum 5 years of relevant working experience in local construction industry will be an added advantage

Good team player and able to work independently

BCSS Certification

Familiar with the local authorities’ requirements for civil and structural submissions

Possesses strong leadership qualities and analytical and reasoning abilities

Possesses the ability to read, analyses, and interpret common technical information, contracts reports and instructions

The Civil Engineer is responsible for providing engineering and administrative coordination for the design, supply, construction and testing of the project. The primary challenge of this position is to ensure the project is completed in a timely and cost effective manner to meet contractual arrangements made with the client. Responsibilities will focus on projects with bulk earth works and civil works.

Key responsibilities and accountabilities

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Technical

• Manage interface between UGL Electrical/Structural Engineers and Civil design consultants
• Liaise with subcontractors to ensure job is constructed to the drawings, to the customer requirements
• Attend meetings with client taking a lead role on items like bulk earth works and civil works
• Liaise with Client on all technical aspects of the project
• Ensure that the survey of installations throughout the project is conducted in a professional manner with all results being reviewed and accepted as correct with actions coordinated and documented.
• Verification of all Subcontractor earth works and civil works quantities for progress claims
• Assist the Project Manager with compliance to the documentation required under the UGL Management System
• Review and plan the project with the Project Manager to ensure technical aspects of job are clear and to become familiar with contractual arrangements made with client
• Liaise with Construction Manager to ensure job is on schedule
• Provide a focal point for all technical based queries for associated subcontractors/suppliers.
• Provide engineering advice for subcontractors/suppliers
• Liaise with the Project Manager and the Project Planner regarding schedule issues and status of activities
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed
• Assist the Project Manager with all procurement and purchases of goods and services
• Assessment of risks and hazards involved in tasks, and methods to manage the hazards in order to prevent incidents, injury and damage
• Assist the Project Manager in preparation of monthly reports and also attends the monthly report meetings with Client
• Prepare and circulate the minutes of the monthly meeting with Client
• Responsibilities as per Work Health Safety Training Needs Analysis Matrix
• Propose creation and/or modification of HSSE documents within the management Ensure compliance with all record keeping requirements
• Undertake any adhoc projects, initiatives, tasks as directed by the Construction Manager

Policies and Procedure Responsibilities

• Ensure compliance with all UGL HSSE policies, procedures and relevant legislative requirements.
• Ensure compliance with UGL’s Fitness for Work Policy, including undertaking your own Drug & Alcohol responsibility of care and submitting to random testing as required.
• Ensure compliance with all emergency plans and procedures and ensuring they are displayed as appropriate within your area.
• Ensure compliance with all relevant Safety legislation.
• Ensure all work is compliant with UGL’s Quality Management Systems policies and procedures and ISO 9001:2008 requirements.
• All personnel are responsible for ensuring the quality of their work meets specified standards and requirements.
• Raise any non-conformances, with regard to product or process, with immediate manager or supervisor.
• Ensure compliance with all UGL & Group HR policies & procedures and legislation including Equal Employment Opportunity and Harassment Legislation.
• Ensure compliance with all IT policies & procedures in particular with regards to: appropriate access and use of systems/software, security of data and policies pertaining to viewing/ copying/ downloading of inappropriate, offensive or sexually explicit material.
• Ensure compliance with all Procurement and Asset Management policies and procedures.
• Ensure compliance with all policies and procedures pertaining to commercial obligation, risk management and protection of all intellectual property.

Qualifications and Education Requirements

• Bachelor of Engineering (Civil/ Structural/ Building)
• RPEQ certification desirable
• AS 9001 Quality Systems knowledge
• Minimum 5 Years’ Experience in project related disciplines
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, email

Job Description

• Liaise with respective functions to prepare project planning and progress report as and when required by authorities or clients and consultants.
• Ensuring projects meet agreed specifications, budgets or timescales
• Supervision of sub-contractors’ project execution processes.
• Attend technical meeting with authorities and consultants
• Ensure safe work procedures are implemented to control risk
• Familiar with relevant legal requirement
• Other duties as and when assigned

REQUIREMENT:

• Candidate must possess at least a Bachelor's Degree in Civil Engineering or equivalent.
• Required skill(s): MS Office, MS Project, AutoCad.
• Ability to work independently with minimum supervision and to meet tight deadlines
• Good team player

You are assisting the in-house IT Engineer in managing and resolving the day-to-day IT requests from employees. These tasks may include, but are not limited to the responsibilities as follow:

Responsibilities:

· Installing and configuring computer hardware, software, systems, networks, printers and scanners.

· Maintain and monitor the list of e-mail address in the company.

· Create login credential and the access rights to the new employees and deactivate all the access when employees leave the company.

· Ensure the security of data, network access and backup systems are kept up to date.

· Providing technical support across the company, including repairing and replacing equipment when necessary.

· Manage and update IT infrastructure list for the whole company.

· Raise Purchase requisition by identifying and selecting the appropriate equipment that align with the requirements of management.

· Support overseas office user from remote connection.

· Any other ad-hoc duties as assigned by IT lead/Management.

Requirements:

· Only Singaporeans may apply

· Part-timers are welcome

· Diploma or Degree holder with 2-3 years of relevant working experience.

· Extensive knowledge of computer hardware systems

· Familiarity with general OS systems, Enterprise, programming languages, and Office software

· Knowledge of LAN and wireless networks

· Good communication skills

· Ability to troubleshoot complex software and hardware issues

· Knowledge of database and networking security systems

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Investigate and analyse incidents pertaining to rotating equipment failure or malfunction in order to identify root causes of problems and recommend & implement solutions.
• Identify, analyse and troubleshoot machinery deficiencies and make recommendation for improvement.
• Monitor and review implementation of Preventive Maintenance program to achieve high plant availability.
• Monitor Condition Monitoring program, analyse and propose recommendations for predictive maintenance.
• Establish programs and initiatives to maximize plant availability and equipment reliability

• Degree in Mechanical Engineering
• At least 4 years' experience in maintenance of plant equipment especially rotating machinery, preferably in oil/petrochemical or related industries

The Field Service Engineer is responsible for carrying out after sales field service jobs including testing & commissioning, servicing, troubleshooting and overhaul of Ingersoll Rand’s air compressor at our installed bases. He/she will require technical knowledge of compressed air systems, customer orientation and strong ownership mindset to be successful in this role.

Responsibilities

• Perform installation, inspection, diagnose, maintenance and rectification on compressed air system at various commercial and industrial establishments.
• Conduct site and classroom training to customers on compressed air system.
• Recommend necessary actions to improve the efficiency and reliability of customer’s compressed air system.
• General service report writing for internal and external customers.
• Document and prepare field service quality reports. If there are quality problems, it is necessary to feedback specific product defects to the production department and assist customers to take corrective measures.
• Provide technical support for the Industrial Technologies & Services (ITS) products, including but not limited to Compressed Air System, Air Dryers System, Air Audit and IIOT system.

Basic Qualifications

• Degree in Mechanical/Electrical Engineering with strong field service experience in compressed air systems and PLC panel programming or related.
• Singapore Class 3 driving license.

Travel & Work Arrangements/Requirements

Office & Site-based within Singapore for field service jobs at installed bases.

Key Competencies

• Customer Orientation
• Ownership
• Independent
• Basic software applications such as Microsoft Office (e.g., Excel, Word, Outlook) and corporate systems (e.g., SAP).

What we Offer

• Equity Grant
• Employee Insurance
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Overtime & Allowances

Job Summary

The Channel Sales Engineer / Manager will be based in Singapore and will be responsible for developing the channel sales strategy, partnering existing distributors, developing new channels to provide compressed air solutions and grow our channel sales revenue.

He/she will act as an interface between Ingersoll Rand and our distributors in Singapore to drive strategic alignment and resolve outstanding challenges relating to sales, service, and operations.

Responsibilities

• • Develop and execute channel sales strategies for Ingersoll Rand’s Industrial Technology & Services (ITS) compressed air solutions in Singapore.
• Identify and develop new channel partners.
• Perform business analysis (e.g., SWOT) through collection of information from competition, distributors, customer buying behaviour, potential market volume, current market share and customer’s feedback.
• Achieve sales target set for area of responsibilities and industries by building and maintaining close relationships with distributors & customers to solicit for orders.
• Provide pre-sales technical assistance (incl. demonstration & technical presentations), product training and after-sales support to distributors and end-users.
• Report channel sales activities timely and accurately, submit monthly reports on channel sales, lost orders, and competition.
• Attending trade shows, conferences, marketing, and other events.
• Work closely with supply chain management, sales support and project engineer and order fulfilment team.

Basic Qualifications

• Degree / Diploma in Mechanical Engineering or related fields.
• Channel sales experience with industrial products such as Air Compressors, Dryers or other similar equipment.
• Driving license & own vehicle.

Travel & Work Arrangements/Requirements

Office-based, will be required to travel within Singapore or overseas for business needs.

Key Competencies

• Customer Orientation
• Ownership
• Business Awareness

What we Offer

• Equity Grant
• Employee Insurance (Incl. Dependants)
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Annual, Sick, Hospitalisation, Marriage, Exam, Compassionate, Maternity, Volunteerism Leaves.

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)