General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent shall oversee the maintenance of static and rotating equipment at the LNG Terminal. These include high pressure pumps, compressors, vessels, piping, valves, mechanical loading arms and structural elements; support the development and the upkeep of maintenance programme with advice from the Mechanical Engineer and to ensure that service records and logs are properly updated and maintenance activities are safe and efficient with minimal disruption to production.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Oversee all mechanical maintenance work at the Terminal to ensure compliance with facility standards and procedures and alignment to legislative guidelines.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical equipment and piping systems such as BOG compressors , cryogenic pumps , Marine Loading Arms, storage tanks and pressure vessels
• Supervise the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and not affecting terminal gas supply reliability
• Develop and update maintenance plan and schedule for relevant facilities and procedures with inputs from other teams to minimise production disruptions and redundant work.
• Perform the review and analysis of operating equipment and facilities to identify anomalies, propose improvement and mediations to extend equipment lifespan and reduce maintenance cost.
• Review maintenance plans for compliance with Company's engineering standards and practices to ensure such standards and practices are aligned to legislative guidelines and industrial standards.
• Prepare PM Checklists, MSRAs as required.
• Responsible for the achievement of Maintenance KPIs, information sharing and coaching of technicians including their training plan and technical advice.
• Responsible for manpower planning and management including overtime planning, system entry and emergency activations.
• Support Spare Parts and Warehouse activities such as stock count, critical spare review, spare order review/purchase /replenish and SPIR list.
• Provide scope of work, PR and evaluation for maintenance service contract/technical work outsourcing.
• Budget forecasting, monitoring and management of approved budget.
• Participate in emergency response procedures and be assigned to any specific roles and responsibilities for such purpose.

Work Experience

• Minimum 8 years' experience in mechanical and maintenance function, preferably in oil/petrochemical or related industries
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• Minimum 3 years' supervisory experience in an oil and gas installation is critical to success.
• Practical experience in repair and maintenance of sophisticated static and rotating equipment, reciprocating compressors and engines, piping and valves is essential.
• In addition, the successful candidate should possess the following personal attributes:

1. A team player who can work well in a team and willing to collaborate with other business groups to achieve results.
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.
3. Diplomatic, pro-active and have excellent organizational and motivational skills to deliver world class maintenance performance.
4. Outstanding ‘can-do’ attitude with high capacity in problem solving.

Education

1. Diploma or Degree in Mechanical Engineering.

Requisition ID:R000060450 Job Location: Singapore - Jurong Island

To submit application, please click below posting link or copy and paste to a new browser:

https://chevron.wd5.myworkdayjobs.com/jobs/job/Singapore-Central-Singapore-Singapore/Mechanical-Technician--Trainee_R000060450

Responsibilities for this position may include but are not limited to:

• Performs maintenance, repair, alignment and testing of rotating equipment and components such as compressors, chillers, centrifuges, pumps and gear boxes, mechanical seal, couplings etc.
• Performs maintenance servicing for pressure relief devices such as Pressure Safety Valve, Breather valves, Emergency hatches etc.
• Supervises maintenance, cleaning, repair and handover of fixed equipment such as boilers, pressure vessels, storage tanks, piping, heat exchangers, fin fans, painting and insulation work etc.
• Reads and understands equipment drawings, datasheets, crane lifting plan, P & ID or other instructions
• Determine materials, tools, manpower and methods required to complete the maintenance task
• Develop Job Safety Risk Assessment for every work assigned. Ensure Safe Work Procedures are followed. Ensure safeguards are followed such as valid permit are issued, wearing prescribed Personal Protection Equipment etc.
• Liaise with operations for system handover; liaise with other functions such as warehouse and equipment vendors for completion of urgent break-in work
• Writes post maintenance reports, communicates findings to relevant work groups; follows and completes maintenance quality assurance checklist
• Assists in troubleshooting equipment with operations and equipment vendors; able to utilize and interpret manufacturer’s operation and repair manuals

Required Qualifications:

• NITEC/Higher NITEC/Diploma in mechanical engineering or related engineering discipline
• Fresh graduate without working experience is also welcome to apply
• Preferably with background in oil & gas, petrochemical, and pharmaceutical industries
• Strong oral and written communication skills.

Preferred Qualifications:

• Able to operate drilling and fixed hoist
• Able to thread piping and fittings for assembly, join PVC piping and tubing
• Able to perform hydro-test of fixed equipment or rotating equipment during integrity/leak test
• Utilize Computerized Maintenance Management System (CMMS). Input into CMMS details such as equipment history, time confirmation, work notification history. Provide feedback post maintenance for continuous improvement

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

We are looking for a Senior Pre-sales Engineer (Cybersecuity) to develop good working relationship with the sales team to identify and work on sales opportunities and driving it to closure. Together with sales, the incumbent is responsible but not limited to the following:

• Execute the sales strategy, working with supporting business unit within Cyber DBA to obtain support to assist the sales team to deliver the required results.
• Be the technology and solution advisors with sound knowledge in the cybersecurity domain.
• Act as solution consultant that can speak to the security landscape, architectural models and solutions credibly, and possess the ability to discuss and present to senior members of a client team.
• Conversant in solution design methodologies and security by design guideline (e.g. Best Practices type of approaches) and have the ability to generate high quality artifacts such as requirements artifacts, high level and detailed designs and deployment plans.
• Have an understanding across breadth of cyber technology domains which includes but not limited to Network Security, Endpoint Security, Security Consulting, Incident Response, Threat Detection, and Managed Security solutions and understanding the inter-relationships between major components.
• Lead and shape client expectations.
• Be a primary facilitator and lead large groups.
• Help drive pursuits and engage in deals as a team, matching outcomes to expectations.

Requirements:

• 3 - 5 years of experience working in a pre-sales capacity related to cybersecurity domain such as Network Security, Endpoint Security, Security Consulting, Incident Response, SIEM, Threat Detection and Managed Security solutions.
• Excellent knowledge of security solutions and technologies, including:

1. Operating System, Network architecture/implementation/configuration experience
2. Network Security like next generation firewall technologies, network detection and response technologies
3. Endpoint Security like anti-virus, and EDR solutions
4. Cyber security anomalies detection and response like SIEM and SOAR

• Familiar with defence regularity compliance
• Strong technical skills with the ability to prioritize and execute in a methodical and disciplined manner. Set and manage expectations with senior stakeholders and team members
• Excellent communication and presentation skills with the ability to present to a variety of external audiences, including being able to interact with senior executives
• History of creating rapport with customers at all levels
• Understand and be conversant about Cyber Security Domains
• Professional security related qualification such as CISA, CISM, CISSP, GCIA etc
• Comfortable working in a project based / client serving model
• Singaporeans only

Work location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Responsibilities

• Act as the primary point of contact for all matters related to the E-house components of the FPSO project. Coordinate with engineering interdisciplinary teams, contractors, and stakeholders to ensure seamless integration of E-house systems.
• Be the first point of contact for any E-house related engineering issue.
• Lead a team of engineers, topside design contractor, and E-house module EPC contractors to conduct engineering design, support the integration, construction, and commissioning activities until project delivery.
• Review and approve design specifications for E-houses, ensuring they meet project requirements and industry standards. Collaborate with project stakeholders to address any design issues or modifications.
• Oversee the engineering design, construction and assembly of E-houses, ensuring adherence to project timelines, specification requirements, budget constraints, and quality standards. Conduct regular site inspections and progress meetings to monitor work and resolve any issues.
• Attend FATs, and any oversea technical clarification meetings as required.
• Involve in technical discussions and technical review for electrical studies.
• Implement and monitor quality control processes to ensure the E-house systems are built to specification. Conduct design review, technical clarification meetings, and validation of E-house system design.
• Work with E-house contractor and topside design houses to maintain accurate and comprehensive documentation related to E-house engineering design.
• Prepare and present reports on project status, issues, and achievements.
• Identify and resolve any technical, or project management issues that arise during the E-house design, construction and commissioning phases. Implement corrective actions as needed.

Job Requirements

• Minimum Bachelor’s degree in Electrical Engineering is mandatory. Mechanical Engineering, or a related field, or any advanced certifications (e.g. PMP) or degrees are a plus.
• Minimum of 8 years of experience in engineering coordination, with a focus on electrical systems and E-houses, preferably in FPSO or offshore projects.
• Strong knowledge of E-house design, construction, and commissioning. Proficiency in project management software and tools. Excellent communication, leadership, and problem-solving skills.
• Ability to work in a fast-paced environment and adapt to changing project requirements. Willingness to travel to project sites as needed.

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Salary: $2600 for first 3 months. After confirmation is $2700

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Job Description

The Advanced Remanufacturing and Technology Centre (ARTC) is a contemporary public-private partnership, spearheaded by A*STAR in collaboration with NTU Singapore, to bridge technology gaps in advanced manufacturing and remanufacturing adoption. Smart Virtual Systems Group of ARTC specialises in developing innovative platforms and infrastructure capabilities that enable immersive and connected services for the manufacturing industry.

SVS is seeking a highly motivated Research Engineer to develop highly available and scalable microservices-based applications and AI platform for autonomous manufacturing applications. He/she is expected to demonstrate a high level of independence and initiative, with the ability to effectively engage internal and external stakeholders to deliver solutions.

The key roles & responsibilities include but are not limited to the following:

• Lead the software development and infrastructure system for Autonomous Manufacturing Technologies
• Develop and deploy cloud-native software solutions and implement scalable container platforms using agile methodologies
• Translate business requirements into technical designs
• Coordinate cross-functionally to ensure the project meets business objectives

Job Requirement

• Bachelor Degree in Engineering or relevant disciplines
• 5 years of working experience.
• Understanding of Cloud Native Technologies and DevSecOps CI/CD Pipelines
• Understanding of Kubernetes platform and monitoring tools
• Hands-on experience with deploying and managing microservices using container orchestration platform
• Preferably possess Certified Kubernetes Application Developer Certification
• Can do attitude and happy to interface with multiple stakeholders
• Excellent problem-solving skills, attention to detail
• Excellent verbal and written communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

The Advanced Remanufacturing and Technology Centre (ARTC) is a contemporary public-private partnership, spearheaded by A*STAR in collaboration with NTU Singapore, to bridge technology gaps in advanced manufacturing and remanufacturing adoption. Smart Virtual Systems Group of ARTC specialises in developing innovative platforms and infrastructure capabilities that enable immersive and connected services for the manufacturing industry.

SVS is seeking a highly motivated Research Engineer to develop highly available and scalable microservices-based applications and AI platform for autonomous manufacturing applications. He/she is expected to demonstrate a high level of independence and initiative, with the ability to effectively engage internal and external stakeholders to deliver solutions.

The key roles & responsibilities include but are not limited to the following:

• Lead the software development and infrastructure system for Autonomous Manufacturing Technologies
• Develop and deploy cloud-native software solutions and implement scalable container platforms using agile methodologies
• Translate business requirements into technical designs
• Coordinate cross-functionally to ensure the project meets business objectives

Job Requirement

• Bachelor Degree in Engineering or relevant disciplines
• 2 years of working experience.
• Understanding of Cloud Native Technologies and DevSecOps CI/CD Pipelines
• Understanding of Kubernetes platform and monitoring tools
• Hands-on experience with deploying and managing microservices using container orchestration platform
• Preferably possess Certified Kubernetes Application Developer Certification
• Can do attitude and happy to interface with multiple stakeholders
• Excellent problem-solving skills, attention to detail
• Excellent verbal and written communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function:

• Strategize on maintenance, work instruction and methods to create plant equipment preventive maintenance procedures
• Support in the planning of routine maintenance of production equipment
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle
• Oversee and control maintenance costs. Manage budget for equipment upgrades and replacements.
• Train and mentor technicians in equipment operation concepts and maintenance techniques
• Function as project development member to install/ upgrade equipment. Schedule and obtain project material and manpower
• Support plant EHS and quality initiatives and targets
• Assist with developing budgets and long-range plans based on company growth and future maintenance needs

Major Responsibilities:

• Responsible for the maintenance (corrective, preventive, predictive) of plant equipment, wet process and dryer, dry blending and packaging, Clean In Place (CIP) systems, warehouse in compliance with site safety and GMP procedures to ensure good uptime and good MTBF
• Support the equipment qualification and validation such as walkdown, punch list commissioning, IQ/QQ/PQ for any new projects
• Execution of work order and record job performance via MAXIMO system
• Writing job aids and maintenance SOP, CCA and ER investigation reports
• Manage and lead contractor, vendor and service providers to perform maintenance or project works
• Maintenance budge for area of responsibilities
• Lead and take part in continuous improvement efforts/projects
• May act as a delgelate to the Engineering Manager when required
• Any other duties as assigned by supervisor

Requirements:

• Bachelor of Engineering (Mechanical, Mechatronic, Aerospace) or related disciplines
• Minimum 2 years of relevant mechanical/maintenance experience in manufacturing plant, preferably within GMP manufacturing environment or chemical manufacturing.
• Good communication and interpersonal skills
• Good team player and able to multi task

*Kindly note this position is based in Tuas

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

1) Conduct routine services and machine maintenance

2) Repair or replace machine transmissions, brakes, engines and other associated parts

3) Change engine and hydraulic oil, brake checks etc

4) Troubleshoot, repair, service and commissioning of equipment.

* Knowledge of diesel engine components and operational mechanisms

* Problem-solving ability

* Physically fit

General Overview

This position is part of the Instrument, Control and Electrical (ICE) team that provides maintenance and technical support to the Operations and Project teams in the LNG Terminal. This position is responsible for ensuring the overall technical integrity of the Terminal from the electrical discipline perspective.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Lead and supervise maintenance tasks and reliability improvements of electrical equipment and systems within the Gas Engine Generator (GEG) area
• Implement reliability programs and develop maintenance procedures for electrical equipment to facilitate consistent execution of maintenance tasks
• Develop and carry out minor CAPEX electrical projects following company guidelines
• Investigate electrical equipment failures or malfunctions in order to identify root causes of problem as well as recommend and implement solutions
• Liaise with external stakeholder including government agencies on electrical matters
• Support Major expansion projects from the electrical and operations perspective
• Work closely with Licensed Electrical Worker to provide integrity assurance for the electrical systems.
• The incumbent shall also participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum of five (5) years practical experience in an electrical maintenance / design role in an oil and petrochemical facilities or power generation environment.
• Relevant technical experience in high voltage electrical power systems.

In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Strong interpersonal, written and verbal communication skills

Education

• Bachelor Degree in Electrical and Electronic Engineering from a recognized university.

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

General Overview

This position is part of the Instrument, Control and Electrical team that provides maintenance and technical support to the Production, Mechanical and Project teams in the LNG Terminal. This position is responsible for establishing, reviewing and overseeing the relevant instrument & control design of newly build or modified equipment including implementation of minor instrument and control engineering projects, while ensuring the overall technical integrity of the terminal from the instrument & control (I&C) discipline perspective.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical support and solutions for the Production and Maintenance teams for instrument-related issues
• Liaise closely with Production and Maintenance teams as to how to reduce instrument maintenance costs and increase availability and functionality.
• Liaise with external stakeholder including government agencies on possible gas pipeline network and electrical power grid, instrument and metering interfaces to ensure conformity.
• Prepare and update instrument maintenance procedures for all instruments, PLC, Fire & Gas system, ESD, metering, CCTV and security equipment is up to date
• Conduct root cause analysis for instrument related incident and recommend preventive and corrective actions to prevent future occurrence
• Carry out MOCs project to resolve and improve instrument reliability and operational issues from engineering, construction to commissioning
• Ensure verification, inspection, testing and reporting to management in respect of all electrical and instrument equipment used for maintenance and their certification for use in hazardous areas of the terminal.
• Participate and provide support in execution of maintenance or major equipment turnarounds in the terminal
• Manage functional safety lifecycle of SIS in the Terminal
• Support expansion project from meeting overall facility integrity point of view, ensure smooth integration and any opportunity to leverage with existing Plant is captured
• The incumbent shall also participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum eight (8) years practical experience in an instrument & control maintenance / design function in an oil & gas or petrochemical Plant
• Conversant with local codes, regulations and submission procedures, and must possess expert knowledge of electrical & instrument international engineering design
• Experience in functional safety for the process industry as per IEC 61511. Certified functional safety engineer will be an advantage
• Experience in installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical, instrument and control equipment in the oil, gas or petrochemical industry is required.
• Experience with common PLC programming software and languages and able to troubleshoot third party equipment issues through program debugging. Experience with Siemens PLC will be an advantage

Education

• The candidate must have a good Degree in Electrical & Electronics Engineering or equivalent.
• Candidate with professional accreditation or affiliation to professional bodies of engineers will have an advantage.

Performance Criteria

• Able to carry out day to day activities with minimum supervision.
• Able to perform installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical equipment and related instruments.
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Strong interpersonal, written and verbal communication skills
3. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties

Job Description:

1. Prepare and deliver technical presentations explaining products or services to customers.
2. Coordinate with customers and engineers / Operation department to assess service job requirements.
3. Coordinate with admin staff for engineer deployment.
4. Secure and renew orders and overseas delivery/logistics.
5. Collaborate with other Sales teams to understand customer requirements and provide sales / technical support.
6. Expand sales for existing & new customers and product portfolio.
7. Follow up and negotiate for orders with customers. Regular customer visits.
8. Identify new opportunities under market conditions and prepare market reports accordingly.
9. Comprehensive communication with the customers of the target market regarding the products.
10. Attend vessels/sites in both local and overseas for engine repair/maintenance.
11. Any other ad-hoc duties as assigned by the department head.

Job Requirements:

1. Degree in Marine/Business/Marketing or equivalent
2. Minimum 3 to 5 years of experience in the Marine Industry.
3. A strong technical knowledge of Marine Engines and Spare parts
4. Knowledge and understanding of the overseas markets, trading skills required.
5. Required to make business trips to developing countries and work in high stress sales environment and multitask.
6. Have the experience to station in developing countries.
7. Good communication and interpersonal skills.
8. The ability to build relationships with clients quickly.
9. Analytical and problem-solving skills.
10. Mature, independent, good working attitude, and a team player.
11. Candidates must be keen to work hands-on and initiative.
12. Positive attitude, willing to travel.

• Data modelling and querying using log aggregation.
• Data extraction and reporting with Elastic tools.
• Bulk document indexing and managing search APIs.
• Developing and consuming REST APIs.
• Familiarity with ELK (Elasticsearch, Logstash, Kibana) is preferred.
• Programming experience in Java, Python, HTML, CSS, or JavaScript.
• Knowledge of REST APIs.
• Knowledge of networking and embedded system development
• Good communication and team working skills
• Good problem solver, ability to think out of the box
• Passion in programming is an advantage

Scope

• In General, Plan, manage & control overall scope of Electrical works of

projects.

• Understand Project specifications, prepare specifications for electrical

equipment and systems

• Technically evaluate suppliers’ proposals.

• Guide Designers to prepare Sing[le Line Diagrams/Subcontractors in

producing Field Engineering Drawings and verify their accuracy based on

project specifications and applicable local and international codes.

• Manage Supervisors/Subcontractors for the execution of construction works

by regular visits and meetings.

• Interface with other disciplines proactively to ensure there are no

mismatches.

• Liaise with clients’ Engineers/ Supervisors and Professional Engineers for the

smooth execution of projects.

Requirements

• Recognized Degree in Electrical or Electronics or Instrumentation

Engineering with minimum 8 years relevant working experience, preferably in

the chemical engineering industry.

• Experience with 22KV & LV Electrical system is required preferably in

Singapore and understanding of Singapore codes.

• Matured, Proactive, leadership qualities, good communication and

interpersonal skills are essential and willing to work longer hours based on

project needs.

• Familiarity with relevant Local & International Engineering Codes and

Practices.

• Senior positions will be considered for candidates with more experience in

the relevant field

Job Responsibilities

• Design process and perform process calculations for water, wastewater treatment, air treatment projects.
• Design PFD, P&ID with Auto CAD independently or with the help of drafters.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and piping and ducting with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Prepare submissions of the process drawings and textual documents.
• Focus on deliverables and deliver the above-mentioned documents on time.
• Evaluation of technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Other ad hoc jobs.
• Report to engineering manager.

Job Requirements

• Minimum Qualification: Bachelor degree in environmental, chemical engineering or related engineering
• The candidate should be highly responsible for this role.
• A degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment. Master degree holders with less experience will be considered.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.
• Must be able to communicate effectively in English, proficiency in Mandarin will be added as advantage.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628