JOB SUMMARY:

Coordinate Gradiant Field Construction and manage Operation activities in Singapore and in Southeast Asia (as long as travels reasonably allow). Responsible for the Coordination, Operations, and Maintenance of Gradiant systems during construction, commissioning, operations and defect liability period phases. Represent Gradiant locally in compliance with Company culture and standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

In collaboration and alignment with Corporate Engineering, Project Management, Procurement:

• Conduct Field Engineering during the piloting, construction, commissioning and operation/maintenance/DLP/after sale phases of Gradiant’s Projects in Singapore and overseas with minimal supervision.
• Provide technical and hands-on support for the implementation of pilot studies and commercial operations (e.g. process adjustments, chemical preparation, preventive maintenance activities, corrective maintenance, instrument calibration, membrane cleaning, troubleshooting, process optimization) as directed by Gradiant Operations and Process Engineering Managers.
• Manage Gradiant and/or its partners’ site operators in implementing good practices for plant operations and maintenance and daily operational activities through preparation and implementation of standard operating procedures (SOPs) and technical training.
• Support the development, establishment, and maintenance of plant performance monitoring, reporting and improvement.
• Proactively report and investigate plant performance/reliability issues and propose practical and cost-effective solutions.
• Coordinate and oversee the relevant technical support to the operating sites, as to reduce unplanned downtime through failure analysis and corrective actions implementation.
• Support the preparation of the predictive and preventive maintenance programs at operating sites and closely monitor their performance.
• Participate in technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s local representative.
• Promote and support Gradiant after sales services, including spare parts, consumables, ad hoc operational and site technical support. Work closely with Engineering and Procurement departments to correctly specify and source materials and services.
• Positively promote a safe and healthy work environment and employ safe work practices at all times, including documenting incidents and recommending and following through on corrective actions.
• Monitor compliance with contractual and regulatory requirements.
• Maintain efficient communication and information sharing between the Operations Department and Engineering/NPI Departments including writing and issuing technical reports and Return of Experience/Lessons Learned reports.
• Carry out other duties as may be assigned from time to time by your supervisor.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least formal trade qualifications. Bachelor's Degree/Post Graduate Diploma/Professional Degree in Environmental, Chemical, or Mechanical Engineering is desirable.
• At least 2 year(s) of experience in Commissioning and/or in Operations and Maintenance in the water industry is required for this position.
• Familiar with various water and wastewater technologies
• Proficient in Microsoft Office Suite
• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities
• Reliable, well organized, and detail-oriented
• Fluency in English
• Applicants must be willing to travel as and when required (up to, and sometimes exceeding, 50%)
• Familiarization with mechanical,electrical,Instrumentation and Controls of process plants
• Commissioning activities like SAT/FAT,instruments,valves and controls loop check

JOB SPECIFICS:

• Ability to work in a high energy, start-up based environment.
• Strong communication skills to convey ideas and technical information effectively with team and customers.
• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.
• Pays attention to detail, identifies & solves complex issues.
• Checks work for quality.
• Shares suggestions to improve quality & productivity.
• Works independently with minimal supervision.

• Position: Service Engineer (Crane/Heavy Equipment Industry)
• Location: Tuas (company transport provided)
• Working hours: Monday to Friday (8.30am - 4.30pm)
• Salary (commensurate with experience): Up to $4,000 + OT Payable + AWS + Performance Bonus + 14 Days Annual Leave + Transport Allowance + Meal Allowance
• Duration: Permanent
• Industry: Equipment & parts distributor (MNC)

Main Responsibilities:

• Product delivery training to distributors and customers
• Provide diagnosis guidance and analyzing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue
• Furnish warranty claims and quality report to drive quality improvement on our products
• Any other ad-hoc duties assigned

Requirements:

• Minimum Diploma in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess a valid Class 3 Driving License
• Will involve travelling to other countries within Asia, entitled to travelling allowance

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Main Responsibilities

• Research & Development for machine tool products and technologies (CNC Milling Machines and it’s Automation)
• Development of Customized Machines for our customers.
• Collaboration with main company departments from Sales, Marketing, Product-Management, Production, Supply-Chain, Customer-Support and Controlling.
• Design of rigid and high-accuracy structural parts as well as lightweight-parts for fast, high-acceleration-applications in teamwork with Simulation- and Test-Engineers.
• Design of mechatronic-units with pneumatic, hydraulic, servo-electric and sensor components.
• Involvement in Concept-Design, Structural-Simulation, Detailing, Prototyping, Testing, Production, Customer-Support and Surveillance of machine-performance at our customers.
• Strong guidance by experienced senior-engineers along the career-path.
• Collaboration with extensive global network of Makino R&Ds, Sales-Regions and Key-Suppliers.

Job Requirements:

• Degree in Mechanical Engineering from reputable University
• Strong interest in product-design for the production-environment as key-enabler for many innovative products.
• Creativity for innovative solutions as well as strong analytical skills
• Minimum of 2 years of experience in mechanical design
• Good time management, pro-active, self-motivated and high sense of responsibility.

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

- To build and design cold storage rooms

- Project engineer is required to serve customers by identifying customer needs and engineering modifications of products, equipment and services.

- Effectively cooperate and communicate with project managers and others to provide assistance and technical support.

- Understand customer service needs and provide technical and engineering information on products, services or equipment.

- Develop and maintain customers, prepare cost estimates, etc.

- Annual leave and sick leave are the same as the Ministry of Labor, bonuses and thirteenth salary depend on company profits

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

Geotechnical:

- Experienced in the design of earth retaining and stabilizing structures, deep foundations, reclamations, slope stabilities.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Responsibilities:

• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas.
• Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals/drawing for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements:

• Minimum diploma in Manufacturing / Electrical /Mechanical / Engineering discipline.
• Minimum 5 years working experience in manufacturing environment.
• Willing to work after working hour or during non-working days.
• Able to work under pressure.
• Computer literate. Autocad is an advantage
• Knowledge in ISO is an advantage.
• Able to start on short notice / immediate.

Responsibilities:

• Prepare & conduct quality inspections, coordinate for non-destructive testing & implement QA/QC management system at site
• Distribute relevant QA/QC documentation to site subcontractors
• Compete site quality control instructions and action remedial responses
• Coordinate with site / client on all quality issues coordinate and attend the QA/QC site weekly meetings
• Consult QAQC Lead on all nonconformance reports and undertake remedial action
• Participate in the quality internal and external audits

Requirement:

• Min. 1 - 3 years of relevant working experience, preferably in QA/QC and commissioning of mechanical systems
• Min. Diploma in Mechanical Engineering or equivalent
• Possess Certified Welding Inspector (CWI)
• Well versed in Universal Standard codes such as ASME / API / AWS / NACE & DSEN

Job Description

• Responsible for analyzing and evaluating current systems and work processes
• Identifies areas for improvement and develop innovative solutions to improve operations efficiency, productivity and cost savings
• Documents processes, procedures and work instructions
• Responsible for downstream production and resources planning
• Prepare monthly reports for management meeting
• Perform other work related tasks as and when assigned

Requirement

• Bachelor’s degree in Industrial Engineering, or related discipline and/or equivalent experience
• Preferably 5 years of related work experiences
• Good analytical and presentation skills
• Excellent written and verbal communication skill
• Ability to solve problems and address root causes
• Committed, good team player with strong interpersonal skills and multi-tasking capability
• Ability to be self-motivated and work effectively with minimal supervision

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description

• Perform process design for chemical plants, storage terminals, industrial waste facilities in basic design, FEED and detailed engineering stage.
• Responsible for developing process engineering deliverables including PFD, P&ID, calculation reports, heat and mass balance, system descriptions, line list, simulation model, utility consumption list, process control philosophy, etc in accordance with project requirement and applicable codes/standard.
• To carry out process calculations such as hydraulic calculation, surge analysis, heat transfer calculation, pressure relief and blowdown analysis, utility consumption calculation, equipment sizing, etc.
• Develop firefighting design philosophy, fire water/foam demand calculation and fire water/foam network hydraulic simulation as per local regulation and international code/standard.
• Develop design basis and UFD for utility supply system and wastewater handling system.
• To participate in design review, Process Hazard Analysis, SIL Studies, 3D Modeling review and prepare close-out reports when required.
• Work closely and co-ordinate with other engineering disciplines for preparation of process deliverables and provide process parameter input as required.
• Provide regular update to Lead Process Engineer, Process Manager and Engineering manager on process related technical and engineering issues.

Requirements:

• Bachelor’s Degree in Chemical and Biomolecular Engineering or equivalent
• Fresh Graduates are welcome to apply
• Team player with strong analytical and communication skills

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned

Requirement:

• Bachelor’s Degree in Civil Engineering or equivalent
• Able to lead and work independently
• Proficient in Microsoft Office and AutoCAD
• Good communication skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

• Monitor the quality of extrusion fabrication outputs and safety of extrusion operations
• Trains and reinforces employees on machine operation, safety and company policies
• Inspect fabrication outputs to check for inconsistencies and deviations from established quality standards
• Maintains fabrication workflow, processes and types of machinery
• Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines
• Ensures that production is being accomplished as per production schedule and specifications
• Monitor team and work procedures to meet production schedules
• Provide direction for project tasks and hold all team members accountable for safety, quality and production
• Conduct daily briefing with the crew to review production goals and performance feedback

Qualifications and Requirements:

• Minimum of 3 years experience as a production engineer in a construction or manufacturing environment
• In-depth knowledge of extrusion procedures, equipment, and WSH guidelines
• Able to read and interpret construction blueprints and shop drawings.
• Problem-solving abilities
• Able to use a variety of material handling and fabrication equipment.

Job Description & Requirements

1. Ensure that the Inspection department approves fittings, ducts, water pipes, and other accessories before the installation begins.
2. Deliver all tools required for the fitting including power tools, hand tools, scaffolding, and ladder on time and in the exact numbers as mentioned in the list.
3. Prepare, apply, and get approval for the HVAC shop drawings, work method statement, MEP-coordination drawing, and project specification from the head engineer.
4. Coordinate installation schedule with team members and other departments working on the project.
5. Monitor site activities and make sure all rules and regulations are followed. Making reports on daily progress made at work and ensuring it reaches the superiors.
6. Ensure safe construction of heating, ventilation, and air conditioning maintenance according to rules and regulations set by the safety policy manual by the company. They will have to ensure the protection and safety equipment is 100 per cent tried and tested for safe use.
7. Arrange labor and other professionals including pipe fitter, duct fitter and assistant duct fitter. They also act as a supervisor for the installation and maintenance project.
8. Additional responsibilities include having to arrange for the safety gear and equipment they need to do their work.
9. Documentation of the Conduct Testing inspection process for a variety of tasks including the light test for ducts, underground chilled water piping system, and hydro test.
10. Attending weekly and monthly meetings held by the project manager and QC supervisor to talk about the project updates and completion.
11. Assisting the commission team during the testing, balancing, and adjusting phases of air and hydronic fitting.

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Benefits:

• Working Hours: 8 am-6 pm (6 days)
• 14 days Annual Leave after confirmation
• 14 days Medical Leave (completion of 3 months service)
• $200 medical claim per year
• Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

Job Description:

• Gather feedback from stakeholders and finalize product requirement documents with clarity on objectives and execution details.
• Prepare and archive technical documents such as drawings, specifications, test results etc.
• Coordinate with the electrical team for design verification of electromechanical parts.
• Coordinate with the supply chain such as cost analysis discussions.
• Coordinate with quality assurance such as to ensure critical dimensions are met.
• Coordinate with the production team such as correct assembly instructions and storage.

Qualifications:

• Strong written & verbal communication skills in English and Chinese would be favorable.
• 3 years of experience in Mechanical engineering design would be favorable.
• Review, edit, and update drawings and other technical documents for new products.
• Experienced with using FMEA and DFM to evaluate components and systems.
• Experienced working with various mass manufacturing methods such as casting, CNC, laser-cut, bending, and stamping would be favorable.
• Familiarity with EU automotive homologation standards would be favorable.
• Familiarity with quality requirements such as PPAP/ISO 9001/IATF 16949 would be favorable.