Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Job Description:

• PC setup & troubleshooting, application setup & configurations for end-users
• Oversee the IT infrastructure and equipment which includes Print server, Desktops, Laptops & windows workstations
• Managing Active Directory, DNS, DHCP, IP Addressing, Group Policy
• SCCM Asset Management, WSUS Server & Patch Management
• Assist in maintenance of anti-virus platform for servers and client PCs, conduct test and deployment of Microsoft patches for servers and clients
• Review and monitor the IT infrastructure to ensure that it is secure and optimized
• Support network & server of the company, plan, recommend and implement improvement to the IT infrastructure of the company
• Perform Backup & Restoration
• File Server Access Management, Firewall and Security Administration
• Other Ad-hoc duties as assigned

Job Requirements:

• Candidate must possess at least Bachelor's Degree in Computer Science, or Information Technology
• Preferably have 3 years of experience in IT operations, PC Support & Troubleshooting, infrastructure, network administration and end user support.
• Experience in Desktop, Laptop Support & Troubleshooting, O/s & Application configuration
• Experience in Windows10, Routers, Firewall, Switches, Wireless communication, WAN, FTP, Proxy
• Willing to perform Overtime

We regret that only shortlisted candidates will be notified.

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Ship electrical system design
• Electrical Load Schedule
• Electrical Single Line diagrams
• Short Circuit calculation
• Circuit breaker calculation
• Electrical equipment selection
• Electrical cable schedule, Cable tray layout, MCT design, cable route preparation, termination diagram
• Preparation of electrical material take off
• Possess good knowledge in automation integrations such as vessel ISCS, VRCS, AMS, etc.
• Prepare design drawings and documentation
• Project management, Project scheduling, client interaction, site visit (client office, ship, etc)

REQUIRED QUALIFICATIONS AND SKILLS

• Bachelor Degree in Electrical Engineering
• At least 3 years of working experience in the marine sector

Job Description

• Industry/Organization Type: Manufacturing/Production
• Position Title: Technical Support Engineer (Electronics)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8.30 am – 6 pm
• Salary Package: Up to $4,500 + VB
• Duration: Permanent

Key Responsibilities

• Manage technical transfer of products/projects in assembly and testing, including coordination with customers.
• Provide ongoing technical support in manufacturing and testing phases to optimize product builds.
• Assist the Quality Control (QC) team in resolving Return Material Authorization (RMA) issues.
• Support the Quality Assurance (QA) team in matters related to compliance, regulatory requirements, customer interactions, and audits.

APPLY NOW!!!

• Minimum of a Diploma in Electronics Engineering.
• At least 2 years of relevant work experience in the electronics manufacturing industry.
• Technical competence in handling manufacturing, project transfers, and troubleshooting within a production environment.
• Experienced in PCBA manufacturing and testing.
• Ability to communicate effectively with customers on technical matters.
• Experience working in an ISO13485 and FDA-regulated manufacturing environment is preferred.
• Strong communication and problem-solving skills.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69907 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Join us as we pursue our exciting new vision to make machine data accessible, usable and valuable to everyone. We are a company filled with people who are passionate about our product and seek to deliver the best experience for our customers. At Splunk, we’re committed to our work, customers, having fun and most importantly to each other’s success. Learn more about Splunk careers and how you can become a part of our journey!

As a Splunk Solutions Engineer (SE), you’ll be the primary technical resource for the assigned Enterprise accounts specifically covering the regional assigned market Indonesia. Our clients and partners span all business sectors and sizes.

This is an opportunity to work at a company that is changing the way information supports business decisions. You will be responsible for actively driving and running the technology evaluation stage of the sales process, working in conjunction with the sales team as the key technical advisor and advocate for our products and services.

Splunk Sales Engineer will answer technical inquiries from customers regarding Splunk technology, features, solutions, applications as well as eloquent Splunk technology and product positioning to both business and technical users. You will identify all technical issues of your assigned accounts to assure complete customer happiness through all stages of the technical sales cycle, and you should also establish and maintain positive relationships with our customer's technical staff. You will work closely together with the Partners, responsible for the opportunity if required.

Responsibilities: I want to and can do that!

• Demonstrate Splunk products and services to customers on site, remotely via webinar sessions, and at field events such as conferences and trade shows
• Willing to travel to visit partners, prospects and customers, and to engage in onsite customer and partner work when required
• Experience responding to functional and technical elements of RFIs/RFPs is also relevant.
• High-reaching with a proven record in technical software/hardware sales and knowledge of technology
• Strong presentation skills and able to communicate clearly and expertly
• Ability to be organized and analytical, and eliminate sales obstacles using creative and adaptive approaches
• You should be comfortable working for a multifaceted technical organization with a fast-growing partner and customer base

Requirements: I’ve already done that or have that!

• At least 5 years of proven experience in selling and supporting software products to IT organizations
• Experience in delivering sales and technical enablement workshop or webinar to customers
• Proficient in either IT Security or DevOps solutions.
• Experience and familiarity with IT management products and services.
• Experience with networking, server, application and development technologies
• Domain expertise with IT Operations, Application Management and/or security/compliance is desirable.
• Indonesia Bahasa speaker

Service Technician

• $2500 - $3300 + $60 handphone allowance
• Senoko
• Working hours: Mon - Fri 8am – 5pm, Sat 8am – 12pm

Requirements:

• Candidate must possess at least a NITEC, Professional Certificate in ( Electrical / Electronic / Mechanical) or equivalent.
• Must have basic Electrical/ Mechanical and Electronic background.
• Must have class 3 driving licence
• Able to start work immediately or short notice.

Job Responsibilities:

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Experience in Security System is a plus.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities and Duties

• Assist in the resolution of technical problems.
• Providing on-site and remote technical support.
• Diagnosing, troubleshooting, and repairing of semiconductor equipment.
• Identifying technical problems and making analysis in different Service categories.
• Ensure documentation and data are well recorded into the system in a timely manner.
• To manage spare parts inventory and to ensure sufficient stocks on hand and smooth operations.
• Follow up status of shipment and delivery with Operations Team where required.
• Understanding customer's needs and providing support and solutions.
• To file warranty claims on products with principals and enter claims into the system.
• Gathering / analyzing customer feedback and complaints on equipment breakdown.
• Liaise with the principal concerning product quality-related issues.
• Manage and provide effective leadership to the service team

Requirements

• Candidate must possess at least NiTEC/Diploma/Higher/Graduate Diploma in Electronics and/or Electrical Engineering or equivalent.
• Proficient in handling technical and service-related issues.
• Good communicative skills and a strong sense of responsibility.
• Ability to interact with people of all levels.
• Able to work independently.

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Responsibilities:

• Prepare reports, designs and drawings.
• Make calculations about pressures, loads and stresses.
• Consider the strength of construction materials and select appropriately.
• Provide technical advice on safe designs and construction.
• Obtain planning and/or building regulations approval.
• Analyze configurations of the basic components of a structure.
• Monitor and inspect all work undertaken by contractors to ensure structural soundness.
• Inspect properties to evaluate the conditions and foundations.
• Use computer aided design technology for simulation purposes.

Requirements:

• Degree in Civil or Structural Engineering
• Professionally registered with the Institute of Structural Engineers.
• Expert experience in project management.
• Advanced knowledge of construction methods, materials and legal regulations.
• Sound understanding of physics and mathematics.
• Ability to liaise with professionals from other disciplines.
• Meticulous attention to detail with the superb organizational skills.
• Ability to work under pressure and meet tight deadlines.
• Excellent communication and IT skills.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Responsibiliites :

• Collaborate with the business development Team to develop and come up with detailed Solar PV system designs that meet client requirements, local codes, and industry standards.
• Optimise system layout for maximum energy production and cost-effectiveness.
• Perform solar resource assessments to determine energy generation potential.
• Conduct shading analysis and assess site suitability for solar installations.
• Develop bill of materials (BOM) for projects.
• Use modelling software to predict system performance, energy output, and financial returns.
• Prepare and submit permit applications, ensuring compliance with local regulations and utility requirements.
• Coordinate with regulatory authorities to secure necessary approvals.
• Develop and implement quality control procedures for solar installations.
• Conduct inspections to ensure system integrity and safety standards.
• Provide technical guidance and support to installation teams during system setup.
• Troubleshoot and resolve technical issues as they arise.
• Create and maintain accurate and detailed project documentation, including schematics, drawings, and technical manuals.
• Monitor and ensure systems are operating optimally before handing over to clients.
• Promote and adhere to safety protocols and ensure that all installations meet safety requirements.
• Prepare weekly and monthly progress reports for every project to ensure that projects are within schedule.
• Provide technical support for sales, proposals, and during potential client meetings.
• Must be proficient in AutoCAD
• Solar experience is added advantage

Requirements :

• Bachelor’s Degree in Engineering or relevant field
• Prefer two (2) years of relevant work experience
• Preferably with Energy Industry or Renewable Products background
• AutoCAD, PVSyst or Helioscope skills preferred
• Technical advisors, EPC contractors, BD related roles are welcome to apply

• Project Planning and Scheduling: Define project scope, organize tasks, set timelines, and manage resources to achieve project milestones and final deadlines.

• Resource and Risk Management: Coordinate materials, workforce, and equipment while identifying and addressing project risks to maintain quality and avoid delays.

• Progress Monitoring and Documentation: Track each phase of the project, document updates, and prepare detailed reports for stakeholders, including test report documentation.

• Quality and Benefit Realization: Ensure that all work meets quality standards, aligns with client expectations, and delivers intended project benefits.

• Safety Awareness and Leadership: Promote and enforce safety protocols, leading by example to maintain a secure and efficient work environment.

• Essential Skills and Qualifications:

• Electrical Drawings and CAD Proficiency: Skilled in reading electrical schematics and proficient in CAD software (AutoCAD, Revit) for design and planning.

• Strong Organizational and Problem-Solving Abilities: Ability to organize complex projects and solve challenges that arise.

• Effective Communication: Clear, professional communication skills for collaboration with team members, contractors, and clients.

• Driver’s License (Preferred): A valid driver’s license is advantageous for site visits and project mobility.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

Job Title: Mechanical Engineering Technician (Motors and Engines)

Responsibilities and Duties:

• Inspect and troubleshoot equipment, machinery, and operating systems, identifying and correcting issues as needed.
• Maintain high standards in mechanical operations, ensuring systems meet operational and safety requirements.
• Diagnose and resolve mechanical issues with motors, pumps, conveyors, hydraulic systems, and other related equipment.
• Provide expert-level technical support and guidance to junior technicians when necessary.
• Perform both independently and as part of a team to ensure timely completion of tasks.
• Adhere strictly to company safety guidelines, procedures, and industry standards.
• Conduct regular preventive maintenance on machinery as per established protocols.

Technical Skills:

• Use a variety of hand tools, power tools, and rigging equipment for daily tasks.
• Perform welding using cutting torches as needed for repairs and maintenance.
• Operate and maintain heavy industrial equipment, including forklifts, scissor lifts, basket trucks, and bobcats.

Compliance and Reporting:

• Ensure compliance with both company and customer regulations, as well as policies.
• Maintain and manage personal tools, including keeping an up-to-date, documented personal tool inventory.
• Accurately manage time records and complete work orders in a timely manner.
• Foster positive relationships with both customers and team members through effective communication and professionalism.

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Central
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Work with Project Manager to confirm system designs and procurement
• Monitor project progress of sub-contractors and conduct site inspections regularly
• Manage sub-contractors for efficient and prompt completion of work
• Make sure project is carried out according to schedule
• Attending to all design and technical meetings with consultants, main contractors and system specialists to ensure all aspects and requirements were taken care of
• Attending to all site meetings with owner, consultants and main contractors on all matters related to the project operation and coordination
• To review the tender specification requirement and supplier quotation compliance
• Raise MR and order material & arrange manpower for necessary works
• To do quantities take off & prepare cost breakdown and comparison sheet
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess at least Diploma / Advanced / Higher / Graduate Diploma in Mechanical Engineering or equivalent with minimum 3 years relevant work experience in relevant field

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492