Job Responsibilities:

• Novel BCD platform device development.
• TCAD device simulation and deck calibration.
• Device test key design, layout, analysis.
• Device bench testing (DC/HV/reliability) and characterization.
• Device tuning, on time delivery, pass reliability qualification.

Required Capabilities:

• Solid semiconductor device physics and analysis skill, strong knowledge on bipolar and power devices.
• Experienced in BCD device development/ characterization is preferred.
• Hands on TCAD simulation/ calibration, layout skill, power device bench test is preferred.
• Good communication and team work skill.
• Self-motived and avid learner.

Qualifications:

• Preferred Master's or Ph.D. degree in Physics or Electrical Engineering.
• Relevant working experience in BCD development is preferred.
• Proficient in both oral and written English.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior Engineer to be part of our Facilities Department diverse team of talent. You will be the Subject-Matter-Expert for both the UPW & Chemical Systems.

What you will be working on:

• Plan and execute preventive and corrective maintenance activities for chemical, slurry and gas systems including chemical waste collection systems to ensure maximum equipment uptime and reliability.
• Manage on-site Total Gas and Chemical Management (TGCM) and Bulk Gas Plant contractors to ensure excellence in operations, maintenance, quality standards and safety compliance.
• Respond to issue and perform troubleshooting with on-site TGCM team, Bulk Gas Plant operations team and contractors.
• Work with Manufacturing and Quality teams on excursion root cause identification, elimination and prevention.
• Initiate, evaluate, plan, design and supervise all improvement or upgrading or new projects for chemical, slurry, gas and chemical waste system.
• Include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, and code compliance.
• Work in a team effort with other engineering, operations, maintenance, and construction disciplines to provide detailed designs and specifications for the installation of new capital equipment and systems.
• Identify and implement new technologies for chemical, slurry and gas systems for process breakthrough.
• Carry out cost estimates, analysis, cost and schedule estimates as well as justification of proposed projects.
• Responsible for maintaining various administrative and engineering database in support of job tracking, engineering data, and costing.
• Provide support for new chemical and gas evaluations.
• Plan and execute specialty gas system release/unhooking.
• Review and improve Operation and Maintenance Standard Operating Procedure and Risk Assessment.
• Support ISEP and Facilities operations concerning chemical, slurry and gas management/operations/storage/maintenance works.
• Carry out FMEAs (Failure Model and Effect Analysis), eliminate single points of failure and mitigate risks.
• Analyze systems to identify improvements that will result in better performance, efficiency gains, reduced maintenance, and cost savings.
• Work with Quality department to ensure the quality of chemicals, slurries and spec gas.
• Be aware of and perform all works in accordance with company safety guidelines.
• Benchmark with other Micron sites on operational, procedural, engineering, and design BKM of Facilities buildings and systems.

More About You:

• Master/ Degree in Chemical Engineering
• Min 4 years of relevant experience in Semiconductor Wafer Fab environment
• Hands-on experience in day-to-day operation and maintenance is essential
• Functional / Technical Skills and Knowledges:
• Operation and maintenance of Ultrapure Water, Wastewater, Chemical, Gas and Bulk Gas Systems

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Associate Engineer to be part of our Furnace Equipment department diverse team of talents.You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Furnace Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our CMP Equipment Department diverse team of talent. You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in CMP Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Diffusion Implant Equipment Department diverse team of talent. You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Implant Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

• Manage deliverables while ensuring adherence to company and department policies and procedures relating to Client Operations and Transfer Agency such as NAV reporting, investor registration, dealing, investor reporting and cash.
• During Japanese business hours serve as a main contact for daily client inquiries from the client servicing desk at our parent company. Manage these queries to a satisfactory closure, or appropriately handed off to the source team, in line with Japanese client service expectations.
• Handle any sensitive or escalated queries/concerns from Clients, Investors, Fund Managers or internal MUFG Departments following a high-quality standard in line with Japanese clients’ expectations.
• Support Client Operations and Investor Operations teams with their deliverables as per the need.
• Support teams and departments across locations, and direct reports with training and guidance on Japanese client servicing as per the need.  
• Foster a professional environment of encouraging personal and professional development.
• Foster collaboration across business units and regions to ensure we deliver against the highest standards in the industry in terms of Japanese client servicing.
• Support Client Operations and Investor Operations projects, initiatives, and risk mitigation within your team and across teams, encouraging participation, constructive feedback and idea generation from the team members.
• Support and Promote MUFG's core values of Trust, Challenge & Empowerment, Passion for Clients and Openness and Honesty.

Job Description

• Collaborate with internal stakeholders to understand their procurement needs and provide support and guidelines as required.
• Conducts timely market reviews and request for price proposal (RFQ) in accordance with internal purchasing rules and guidelines.
• Negotiates quantities, prices, delivery schedule, terms and conditions of delivery and payment/contractual terms.
• Ensure timely PO execution to meet production needs.
• Drives resolution to supply chain issues affecting quality, cost, delivery or lead-time, which may includes engagement with manufacturers/sub-tiers in the supply chain.
• Identifies and realizes cost savings opportunities and execute cost reduction initiatives assigned
• Prepare all relevant weekly, monthly reports
• Other duties as assigned

Job Requirement

• Bachelor Degree in Engineering or equivalent.
• Entry level candidate or 2-3 years working experience in semiconductor industry.
• Detailed oriented, Positive attitude, self motivated, target drive.
• Meticulous and strong in numbers.
• Excellent analytical and problem solving skills.
• Good understanding of procurement best practices & industry trends.
• Strong communication and interpersonal skills with the ability to effectively collaborate with internal and external stakeholders.
• Processes the ability to read, write and communicate in Mandarin with Chinese-speaking vendors and internal Chinese-speaking stakeholders
• Self-starter with good initiative and a team player personality.
• Dynamic individual capable to work under stress and multitask in a fast-paced environment.

Responsibilities

1. Build and maintain strong relationships with key customers, understanding their technical requirements, challenges, and business objectives.

2. Collaborate with sales, marketing, product management, and engineering teams to align Field Application Engineer activities with design win targets, product roadmaps, and market trends.

3. Drive customer feedback and insights internally to inform product development, roadmap prioritization, and service improvements.

4. Represent the company at industry events, conferences, and customer meetings to promote our semiconductor solutions and gather market intelligence.

Requirements

1. With Embedded system programming hands-on experience.

2. Preferred candidates with experience developing camera system or video pipeline applications.

3. Looks for SW engineers that understands the complete SW application development requirements of the customer and help customers integrate company’s SW libraries and explain the workflow of the SW System.

4. Bachelor's degree in engineering, computer science, or a related technical field. Experience at the solution level, with a strong understanding of HW & SW to debug issues, define solutions, and engage customers on their full AI system.

5. Advantages: Prior experience with edge AI solutions and architectures

6. Prior experience with ML tools & coding languages

7. Understanding of the AI edge inferencing market and applications

SUMMARY

Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Review circuit board designs for testability requirements.

· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.

· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.

· Generate reports and analysis of test data, prepares documentation and recommendations.

· Review test equipment designs, data and RMA issues with customers regularly.

· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.

· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.

· Determine conditions under which tests are to be conducted and sequences and phases of test operations.

· Direct and exercise control over operational, functional, and performance phases of tests.

· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.

· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.

· Develop or use computer software and hardware to conduct tests on machinery and equipment.

· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.

· May provide training in new procedures to production testing staff.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

SUMMARY

Direct Test Engineers I & II in operating within area of assigned responsibilities with a high level of efficiency, integrity and enthusiasm, striving to achieve excellence in all endeavors. Designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:

· Recruit and interview Test Engineers I & II.

· Communicate criteria to recruiters for Process Technician position candidates.

· Coach Test Engineers in the interviewing/hiring process.

· Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:

· Identify individual and team strengths and development needs on an ongoing basis.

· Create and/or validate training curriculum in area of responsibility.

· Coach and mentor Test Engineers I & II to deliver excellence to every internal and external customer.

Performance Management:

· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).

· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.

· Express pride in staff and encourage them to feel good about their accomplishments.

· Perform team member evaluations professionally and on time.

· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.

· Coordinate activities of large teams and keep them focused in times of crises.

· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:

· Provide communication forum for the exchange of ideas and information with the department.

· Organize verbal and written ideas clearly and use an appropriate business style.

· Ask questions; encourage input from team members.

· Assess communication style of individual team members and adapt own communication style accordingly.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

Business Strategy and Direction:

· Know and understand the campus strategic directions.

· Define, develop and implement Test Engineering strategies, which contribute to the campus strategic directions.

· Provide regular updates to Assistant Test Engineering Manager on the execution of the strategy.

Cost Management:

· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).

· Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.

· Provide feedback to Assistant Test Engineering Manager on cost and cost trends.

TECHNICAL MANAGEMENT RESPONSIBILITIES

· Perform duties, which involve conventional engineering practices that may include a variety of complex duties from ICT, FVT, ESS to System level test.

· Manage the engineering test function for standard and/or custom devices.

· Through subordinate supervisors or professional staff, identify and evaluate test procedures and test equipment required to perform quality checks.

· Compile and document data necessary to analyze performance and make recommendations for changes in the testing process.

· Assist/spearhead in the development of special test equipment and software text programs as required for the successful completion of project.

· Assist customer, setup training program for new product testing procedures.

· Provide training and assist test engineers.

· Act as the liaison and technical conduit for assigned customers.

· Explore new avenues and test technologies for quality improvements on product assigned.

· Perform detailed analysis on test quality of product assigned, identify trends and spearhead corrective actions.

· Monitor, through assigned test engineer, all NPI activities.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelors of Science in Electronics or Electrical Engineering from a college or university; and five to ten years experience

The Reliability Engineering Automation team prides itself in keeping Visa systems up and secure, catering to the 24*7 needs of the business. The team uses AI to aggregate observational data (from monitoring systems output, job logs, syslog, etc.) and data from ticketing, incident, and event management system data to produce a virtuous circle of continuous insights yielding continuous improvements and fixes The Staff Software Engineer, a highly motivated senior experienced individual contributor, responsible for innovative planning, designing and developing effective solutions in accordance with industry standards on best web development practices. As part of the team, you will be required to own key modules, perform code and design AI architectural reviews, suggest best practices and implement design and development standards. The role is a senior consultant who has the passion to solve problems, factor old codes, learn and pick up new technologies like generative AI, chatops, LLM, Onprem models. Model QA. The role will also be required to lead implementations on key modules and mentor junior team members,

Responsibilities:

• Have the passion in developing and supporting the growth of the next generation software architectures and inspire innovation within the team
• Develop scalable real-time low-latency Artificial Intelligence processing solutions in an agile delivery method
• Lead and guide the team in AI design, code and implement new algorithms to solve complex problems
• Develop AIOPS solutions using available tools and technologies and assist the global team in problem resolution by hands-on participation.
• Engage technical workshops with cross-vertical Technology partners for cross-vertical integration in software development

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Job Responsibilities:

• Novel BCD platform device development.
• TCAD device simulation and deck calibration.
• Device test key design, layout, analysis.
• Device bench testing (DC/HV/reliability) and characterization.
• Device tuning, on time delivery, pass reliability qualification.

Required Capabilities:

• Solid semiconductor device physics and analysis skill, strong knowledge on bipolar and power devices.
• Experienced in BCD device development/ characterization is preferred.
• Hands on TCAD simulation/ calibration, layout skill, power device bench test is preferred.
• Good communication and team work skill.
• Self-motived and avid learner.

Qualifications:

• Preferred Master's or Ph.D. degree in Physics or Electrical Engineering.
• Relevant working experience in BCD development is preferred.
• Minimum of 2 years of relevant experience in semiconductor industry.
• Proficient in both oral and written English.

Roles & Responsibilities

Primary Function/Primary Goals/Objectives:

· Ensure the execution of the capital project on processes, equipment, plant facilities are compliance with the Safety and GMP policies, procedures, standards, and statutory requirement

· Deliver projects independently on time, on budget and in scope.

· Manage project capital and expense cash flow budgets.

· Manage project cost status-raise Purchase Orders, process invoices on a timely manner

· Provide timely project status review

· Manage key portfolios in Project Management Office such as Capital Planning, Site Master Planning, Shutdown Planning, Drawings Management and Metrics Reporting.

Major Responsibilities:

· Implement plant continuous improvement projects and cost saving efforts.

· Conduct Risks Assessment (RA), develop work Method Statements (MS) and Safety Work Procedure (SWP)

· Manage reward and recognition and employee engagement programs in the organization.

· Manage various improvement programs and workstreams in the plant, track and report benefits of projects.

· Any other duties as assigned by supervisor.

Requirements:

· Bachelor’s degree in civil / Geotechnical Engineering

· At least 10 years relevant experience in tender and project management for civil, marine, infrastructure projects

Responsibilities

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D

The role will work as a member of the Global Cybersecurity organisation - Security Architecture team, which is focused on improving technology and architecture decision-making through collaboration with management, staff and customers on technology strategy, enterprise architecture, and investments in strategic security technology.

The individual, with a broad cybersecurity plus systems and network architecture knowledge and experience, will deliver security assessments while supporting our direction, lifecycle management and leadership for security architecture and technology. The individual will perform a key role in Security assessments while supporting various critical initiatives through the identification, analysis, evaluation, lifecycle management and adoption of security architectures and technologies. The Security Architect will work closely with other security functions and will provide guidance to ensure that there is coordination with their activities in technology choices. In addition, the Security Architect will be involved with education and mentorship, supporting the delivery framework, development of technical architecture and associated documentation, as well as advanced topics of research.

Essential Functions:

• Be a product security champion by driving Security Architecture and Design, implementation and optimization for Web, API and Mobile backend applications across Visa.

• Applying security design principles to develop security solutions architectures

• Engage in the initial requirements definition including analysis of threats and risks and alignment with Visa security, Engineering, IT and Architecture standards.

• Conduct and facilitate security reviews, threat modelling including deep design reviews throughout the development lifecycle.

• Facilitate 'table-top'/red-team/scenario analysis exercises in conjunction with other SMEs. Plan the resolution of any identified vulnerabilities/issues.

• You’ll be working on enabling/building security controls which protect the applications from attacks on various platforms and technologies, like:

  • Linux, Windows, VMWare, Openstack, SDN, Public cloud like AWS, Google

  • Cybersecurity tools like IDS, SIEM, Tripwire, Tanium, Netwitness, Netflow, WAF

  • HSMs, Tokenization systems, data encryption solutions from Safenet, Vormetric etc

  • Web technologies like HTTP, SOAP, REST services, AJAX

  • Databases like Oracle, MS SQL, Redis, Cassandra

  • Programming languages like Java, C, C++, .Net, Javascript, GoLang, ErLang, etc

  • Caching services like Hazelcast, Coherence, and messaging systems like Kafka, MQ

  • Web Access Management solutions like Forgerock, Siteminder, Custom/in-house Security Frameworks

• Help business and product team to achieve various compliance certifications like PCI, FFIEC  etc.

• Identify and analyse system and application level vulnerabilities to provide recommended counter measures or mitigating controls that reduce risk to an acceptable and manageable level.

• Driving security technologies evaluations, proof-of-concepts, and production pilots

• Building strong cross-organisational relationship through integration with the teams, in order to effectively influencing staff across the IT organisation and product groups

• Managing the lifecycle of security technologies

• Staying current with security technologies, as well as development techniques and methodologies in order to make recommendations for use based on business value

• Maintaining oversight of the design and implementation of IT systems to ensure appropriate and effective security controls are included.

• Contribute to the definition of overall IT architecture from a cybersecurity lens.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

The suitable candidate will join a team of engineers and operations specialists in the support of enterprise privileged access management infrastructure and operations. He/She will be responsible for the end to end design, deployment, operations and development of the bank’s privileged access management framework, infrastructure and processes.

Key responsibilities

Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.

Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privileged accounts and passwords.

5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.

Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.

Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.

Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.

Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.

Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.

Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.

Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.

Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

We are looking for candidates who possess a robust understanding of RACF, rather than those primarily knowledgeable in MF application development. Our ideal candidate should demonstrate deep expertise in RACF and its related functionalities.

Responsibilities:

Manage and drive z/OS Unix (Mainframe Access Management operations and audits).

Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.

Automate manual processes through scripting or via zSecure.

Possess strong knowledge of designing and reviewing RACF access groupings.

Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.

Experienced in managing Mainframe security projects, operations and implementation

Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.

Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA

Good to have strong experience with using zSecure Admin and zSecure Audit modules.

Good working knowledge of Access Management lifecycle and processes.

Experience in banking or financial services institutions preferred

Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure).

Assists in the coordination of various teams testing and evaluating for the development of design and its implementation of the best output.

Installs, configures, and tests operating systems, application software, and system management tools.

Ensures the highest level of systems and infrastructure availability.

Evaluates the existing systems and provides the technical direction.

Plans and implements system automation as required for better efficiency.

Deals with work process, optimization methods, and risk management tools in the given projects for the successful accomplishments according to the requirements of the stakeholders.

Computer science degree

Scripting and programming proficiency

OS and Network experience

Certification may be helpful

Operating systems Linux, IBM AIX & Solaris

Configuration Management Tools: Ansible and Puppet

Monitoring tools: ELK, Prometheus, Grafana

APM Tools:  Dynatrace & AppDynamics

Cloud Platforms: AWS, Microsoft Skytap, Azure and GCP

Scripting Languages:   SHELL BASH

IaaC Tools: Terraform, Dockerfile

Containerization:  Docker, PCF & Kubernetes.

UNIX System Administration (RHEL, AIX & Solaris), Problem Determination and solving, and experience on GPFS, PowerHA System Mirror, and VIO.

Experience in Observability and Monitoring including APM tools

1. JOB DESCRIPTION
Job TitleSolar Site EngineerOccupationENGINEERJob Description & Requirements
We are seeking dedicated and enthusiastic local Singapore graduates with ITE & Diploma certifications to join our team as Solar Site Engineer. The ideal candidate should be willing to work under harsh conditions at project sites and possess a strong interest in renewable energy, particularly solar power systems.Responsibilities:1. Site Assessment and Preparation· Assist in the evaluation and preparation of project sites for solar installations.· Conduct site surveys and collect data necessary for the design and installation of solar systems.· Coordinate with the Project Manager to ensure all site conditions and requirements are met.2. Installation and Commissioning:· Support the installation, commissioning, and testing of solar photovoltaic (PV) systems.· Work with PM to ensure installations comply with design specifications and safety standards.· Troubleshoot and resolve issues that arise during installation3. Maintenance and Support:· Perform regular maintenance checks on installed solar systems to ensure optimal performance.· Assist in diagnosing and repairing any faults or issues with the solar equipment.· Maintain accurate records of site activities, including installation progress, maintenance schedules, and any issues encountered.· Prepare and submit reports to senior engineers and project managers4. Collaboration and Communication :· Work closely with other team members, including electricians, technicians, and project managers.· Communicate effectively with clients, contractors, and other stakeholders.Criteria:· ITE or Diploma in Electrical Engineering, Mechanical Engineering, Renewable Energy, or related fields.· Basic understanding of solar PV systems and renewable energy principles.· Willingness to work outdoors and under harsh conditions.· Strong problem-solving skills and attention to detail.· Ability to work independently and as part of a team.· Good communication skills and a proactive attitude.· Physically fit and able to handle the demands of on-site work.Preferred Skills:· Experience with solar PV system installation or maintenance (internships or academic projects are acceptable).· Familiarity with electrical drawings· Basic knowledge of electrical safety standards and practices.· Proficiency in using relevant software and tools for site assessment and installation.Working Conditions:· Primarily outdoor work at various project sites.· Exposure to varying weather conditions and potentially challenging environments.· Occasional weekend or evening work may be required to meet project deadlines.

Job Description:

• Operation and Maintenance of Electrical systems
• Continuous performance monitoring and ensuring highest uptime
• Project coordination for new equipment installations
• Troubleshooting of system abnormalities and provide technical solution
• Initiate continuous improvement projects
• Manage external contractor and vendors and maintaining safety standards

Job Requirement

• Degree in Electrical Engineering or related fields with min 3 years' experience
• Experience in operation and maintenance of Transformers, LV, MV switch boards, UPS, Motors, Frequency convertors and power distribution.
• Experience in project installation of electrical distribution
• Able to study protection circuits, single line drawings and control circuits.
• Knowledge of low voltage systems like Fire protection, CCTV, PA and network systems

• Work closely with team members (developers, product manager, customer support and partners) to develop, test and deliver high quality products
• Create detailed, comprehensive and well-structured test plans and test cases
• Prevent, report, analyze and track issues in an effective and efficient manner
• Root cause analysis of existing script failures or product issues, propose and drive enhancement for minimizing project issues or risks
• Design, develop and execute automation scripts or implement quality tools to continuously increase efficiency

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom