Job description:

· Commissioning, Maintenance, Repair & Troubleshooting of marine electrical & mechanical equipment onboard vessels and in company premisses/workshop ( i.e. Burners, Boilers, Scrubbers, EGE, EBG, GCU and supporting systems).

· Ability and willingness to travel on short notice onboard vessels in region, but occasionally also globally.

· Employees must have ready valid travel documentation, passports, visas, seaman book and vaccinations as required to travel.

· This is full time position, and we welcome experienced candidates of all ages.

· Ensure that the work is executed according to the company’s Quality, Health, Safety and Environment guidelines and customer site procedures and report unsafe practices and incidents.

· Write Service Certificates (time sheets) on site and get them signed by customer.

· Write Service Reports with full details of job done, warn customer on possible safety issues, spare parts required/suggested and giving suggestions & recommendation of future services.

· Proactive recommendation of required/suggested spare parts to Customers.

· Communicate sales opportunities to Service Managers.

· Provide onsite and remote technical support to clients.

Required skills:

· Preferred experience with Boiler & Burners systems, Scrubbers, but it is not mandatory.

· Troubleshooting skills in electrical, electronic & mechanical systems.

· Basic programming skills of PLC (Programmable Logic Controllers).

· Basic parametrisation knowledge of industrial & marine controllers.

· Experience in automation, control and instrumentation devices, pumps, electrical motors, frequency converters, actuators, positioners, …

· Proficient skills in MS Office.

· Fluent written and spoken English.

· Cross cultural awareness.

· Structural and systematic approach when executing tasks.

· Attitude to provide high quality of work results.

· Good communication skills.

· Team player mindset with attitude to share knowledge and experience with Your colleagues.

· Customer oriented approach with effectively prioritizing and executing tasks with clear customer communication with no prestige attitude.

• Prepare PLC program, SCADA software and conduct simulation tests in office. Support maintenance of existing SCADA systems and PLCs.

• Install instruments based on hook-up drawings.

• Conduct Factory Acceptance Test (FAT) for panels and do On-site commissioning. Install the hardware and carry out all the tests. Create test reports and submit to customer.

• Attend weekly progress meeting with customer and report progress. Conduct Toolbox meetings.

• Support customer through remote desktop or phone call for emergency issues at site

• Prepare Operation & Maintenance manuals for projects

• Attend company internal meetings and present on progress of projects.

• Good Technical Experience in Electrical, BMS, Process Instruments & Fire Alarm systems

• Prepare and Submit BOQ and Quotation for New Tender jobs and Additional works

• Prepare detail work schedule, site organization and

manpower mobilization plan

• Prepare MSRA for all work activity.

• Submission of Material Catalogue and Samples and Arrange RTO Inspection.

• Prepare Electrical, Instruments & Control cable Schedule

• Arrange Work place daily activity for team members, and arrange and order Tools and Materials.

• Prepare work Progress daily, weekly report & Minutes of meeting report

• Arrange RTO site inspection and testing report as per customer requirements

• Prepare and submit As-Built Drawings with PE Endorsement

• Verify and approve the timesheets of project technicians.

• Prepare PLC program, SCADA software and conduct simulation tests in office. Support maintenance of existing SCADA systems and PLCs.

• Install instruments based on hook-up drawings.

• Conduct Factory Acceptance Test (FAT) for panels and do On-site commissioning. Install the hardware and carry out all the tests. Create test reports and submit to customer.

• Attend weekly progress meeting with customer and report progress. Conduct Toolbox meetings.

• Support customer through remote desktop or phone call for emergency issues at site

• Prepare Operation & Maintenance manuals for projects

• Attend company internal meetings and present on progress of projects.

• Good Technical Experience in Electrical, BMS, Process Instruments & Fire Alarm systems

• Prepare and Submit BOQ and Quotation for New Tender jobs and Additional works

• Prepare detail work schedule, site organization and

manpower mobilization plan

• Prepare MSRA for all work activity.

• Submission of Material Catalogue and Samples and Arrange RTO Inspection.

• Prepare Electrical, Instruments & Control cable Schedule

• Arrange Work place daily activity for team members, and arrange and order Tools and Materials.

• Prepare work Progress daily, weekly report & Minutes of meeting report

• Arrange RTO site inspection and testing report as per customer requirements

• Prepare and submit As-Built Drawings with PE Endorsement

• Verify and approve the timesheets of project technicians.

We are seeking a highly motivated and experienced candidate to join us as Training and Development Manager. You will play a pivotal role in enhancing the skills, knowledge, and performance of our employees, ensuring the continuous development and success of our workforce. You will also play a crucial role in attracting, developing, and retaining top-tier talent to ensure the continuous growth and success of our talent pool.

Responsibilities:

1) Training and Development

• Design and implement training and development programs that are aligned with talent management goals and address specific skill gaps within the workforce.
• Manage orientation sessions for new employees, ensuring a smooth onboarding process.
• Establish a continuous learning culture, promoting ongoing professional development opportunities for employees at all levels.
• Develop and manage the training and development budget, ensuring cost-effective utilization of resources.
• Source and evaluate external training vendors, negotiating contracts and maintaining positive relationships.
• Ensure that all training programs and talent management practices comply with relevant regulations and standards.
• Implement measures to assess the effectiveness of training initiatives and make continuous improvements.

2) Talent Management

• Develop and implement a comprehensive talent management strategy, identifying key skills, competencies, and potential areas for growth within the organization.
• Collaborate with department heads to identify high-potential individuals and create personalized development plans to nurture and retain top talent.
• Facilitate succession planning initiatives to ensure a seamless transition for critical roles within the organization.

3) Performance Management

• Work closely with department managers to implement performance improvement plans and provide coaching to address skill gaps and enhance individual and team effectiveness.
• Monitor and analyze key performance indicators related to training and development initiatives, adjusting strategies as needed.

4) Collaboration and Communication

• Foster effective communication channels between different departments to ensure alignment of training and talent management initiatives with organizational goals.
• Collaborate with external training providers, educational institutions, and industry associations to stay abreast of the latest developments and best practices in healthcare training.

Requirements:

• Bachelor's degree in Human Resources, Organizational Development, or a related field. Master's degree is a plus.
• Proven experience in training and talent management with at least 3 years of relevant experience as a Manager.
• Strong communication, interpersonal, and leadership skills.
• Ability to collaborate effectively with cross-functional teams.
• Excellent organizational and project management abilities.
• Familiarity with learning management systems and other training technologies.

A*SRL/SRIS is looking for a Manager to lead business development, manage relationships between A*SRL/SRIS and its key partners as well as support the institute’s overall Research and Innovation goals.

The key role and responsibilities include:

· Identifying and attracting new strategic industry partners

· Support existing research collaboration relationships

· Partner with Principal Investigators (PIs) and their teams in their interactions with industry

· Assist with identifying collaborative project aims, deliverables, budgets and timelines

· Provide guidance and advice on intellectual property rights and usage

· Review agreements and lead the negotiation of legal arrangements for academic and industry projects in consultation with A*STAR Legal, Innovation & Enterprise HQ A*STAR and BMRC Clusters

The candidate shall also oversee the accounts management function and operate as the lead point of contact between A*SRL/SRIS and strategic and key partners of the institute. He/she will build and maintain close and harmonious customer relationships with strategic and key SRIS partners. The role requires coordination with the Principal Investigators, administration team and A*STAR HQ functions to ensure seamless partnership with existing and new strategic partners.

The candidate will handle the review of contracts, coordinate the smooth execution of projects, and complete project deliverables in a timely manner. He/she will develop ideas and suggestions to enhance the opportunities to achieve the overall R&I objectives of the institute.

Requirements

· Doctorate degree (Ph.D.) in Life Sciences, Bioengineering, Biotechnology, or related fields. Experience and/or strong technical knowledge in Skin Biology/PharmBio is an advantage

· At least more than 8 years of relevant experience

Prior experience managing multiple complex projects

· Prior experience managing multiple high-valued non-academic/industry partners; candidates with experience working in related industry sectors would have an advantage

· Excellent communication (both verbal and written) and interpersonal skills, experience with contracts review is advantageous

· Excellent organizational skills

· Able to work independently and as a team in a fast-paced environment

· Able to complete quality work within tight deadlines

· Detailed-oriented and able to manage KPIs (key performance indicators) tracking for the Business Development team using the Customer Relationship Management system, competent with Excel/Powerpoint for database management and presentations, well organized and resourceful

· Positive learning attitude with a pleasant personality

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A*STAR Skin Research Labs (A*SRL)/Skin Research Institute of Singapore (SRIS) is looking for a Administration Executive to support the Business Development (BD) operations, working closely with the Business Development Director and the Business Development team, researchers, SRIS partners and internal groups within the organisation.

The key role and responsibilities include:

• Assist the BD Operations Manager in developing, maintaining, and overseeing the policies and procedures governing research in A*SRL/SRIS
• Support the BD Director to improve the general administration of BD through close coordination and collaboration with other internal stakeholders
• Tracking and managing legal agreements and maintaining legal agreement database (e.g. CRM tracking)
• Liaising with project managers to ensure contract terms are followed
• Facilitating the negotiation and execution of legal agreements, e.g. filling in templates, checking grammar mistakes and page numbers, cleaning up drafts, summarizing contract, liaising with collaborators for NDAs and submission for ED’s signatures, coordinating with all parties for signatures
• Act as a check point for compliance requirements by sighting compliance related approval documentation where necessary
• Provide secretariat support for all BD and contracts negotiation meetings
• Ensure key stakeholders involved in agreements are reminded of the need for completeness when filling up standard forms and agreement templates
• Ensuring prudent use of resources, etc.
• Assists in maintaining KPI database & to provide accurate information for reports to internal & external stakeholders
• Assists in developing materials for business development engagement activities
• Provide support to facilitate the training and guiding of scientific staff using standard templates, eg how to fill up standard forms and agreement templates for compliance and contract negotiation respectively
• Any related duties as determined by the BD Director

Requirements

• Bachelor’s degree in legal/research/science/technology management, or related fields with a keen interest in research administration with at least 5 years relevant experience
• Must possess a flair for writing to handle minutes and draft presentation slides
• Meticulous, resourceful and uses sound judgment and demonstrates initiative in carrying out assigned duties, with good organisational skills to create / maintain detailed records
• Detailed-oriented and IT-savvy to navigate through databases and software applications
• Proficient in Microsoft Office – word, excel and PowerPoint
• Able to complete quality work within deadlines
• Excellent organizational, communication (both verbal and written) and interpersonal skills, any experience with reviewing contracts is advantageous
• Able to work independently and as a team in a fast-paced environment
• Positive learning attitude with pleasant personality

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A*SRL/SRIS is looking for a Manager to lead business development, manage relationships between A*SRL/SRIS and its key partners as well as support the institute’s overall Research and Innovation goals.

The key role and responsibilities include:

· Identifying and attracting new strategic industry partners

· Support existing research collaboration relationships

· Partner with Principal Investigators (PIs) and their teams in their interactions with industry

· Assist with identifying collaborative project aims, deliverables, budgets and timelines

· Provide guidance and advice on intellectual property rights and usage

· Review agreements and lead the negotiation of legal arrangements for academic and industry projects in consultation with A*STAR Legal, Innovation & Enterprise HQ A*STAR and BMRC Clusters

The candidate shall also oversee the accounts management function and operate as the lead point of contact between A*SRL/SRIS and strategic and key partners of the institute. He/she will build and maintain close and harmonious customer relationships with strategic and key SRIS partners. The role requires coordination with the Principal Investigators, administration team and A*STAR HQ functions to ensure seamless partnership with existing and new strategic partners.

The candidate will handle the review of contracts, coordinate the smooth execution of projects, and complete project deliverables in a timely manner. He/she will develop ideas and suggestions to enhance the opportunities to achieve the overall R&I objectives of the institute.

Requirements

· Doctorate degree (Ph.D.) in Life Sciences, Bioengineering, Biotechnology, or related fields. Experience and/or strong technical knowledge in Skin Biology/PharmBio is an advantage

· Prior experience managing multiple complex projects

· Prior experience managing multiple high-valued non-academic/industry partners; candidates with experience working in related industry sectors would have an advantage

· Excellent communication (both verbal and written) and interpersonal skills, experience with contracts review is advantageous

· Excellent organizational skills

· Able to work independently and as a team in a fast-paced environment

· Able to complete quality work within tight deadlines

· Detailed-oriented and able to manage KPIs (key performance indicators) tracking for the Business Development team using the Customer Relationship Management system, competent with Excel/Powerpoint for database management and presentations, well organized and resourceful

· Positive learning attitude with a pleasant personality

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

1. Degree / diploma in civil engineering / structure engineering.

2. ⁠Able to use autocad.

3. ⁠Coordination drawing.

4. Take charge of overseeing projects.

5. Collaborate with contractors and project managers.

6. Track and report on project progress.

Salary based on experience

***No agents are required for this job posting***

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Originate and close opportunities to develop new market segments, product groups and
• channels.
• • Identify and canvass new sales opportunities and market through prospecting.
• • Provide pre and post-sales support to customers.
• • Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Manage the assigned accounts in a professional and efficient manner, consistent with good technical sales practice;
• To establish and execute a customer contact plan that will ensure the level of service and technical follow up needs and inquiries are properly and promptly addressed.
• Continuously identify sales opportunities within assigned territory or market segment.
• Develop shipping network and strategy to drive new business and client development in marine industry.
• Promote and develop the company’s product and services incorporating customers feedback and requirements.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Perform market research surveys amongst customer base to seek feedback on sales and service techniques, follow-up methods and quality of after sales service.
• Cultivate and enhance long term relationship with new and existing customer and build a strong client relationship and grow accounts to their maximum potential.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Maintain teamwork by incorporating positive attitude.
• Perform weekly & monthly simple sales report for review and implementation.
• Carry out any other duties as and when assigned by the immediate supervisor or higher management.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 2 years in marine industry.
• Is a strong networker and to-the-point communicator who is managed to build and maintain a solid internal and external network.
• Outgoing personality with good communication and interpersonal skills
• Aggressive, enthusiastic, and result oriented.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.
• Possess own car is an added advantage.

• Team based environment with work life balance
• Bi-yearly salary review and fast track career progression
• Full training & support provided to you

Responsibilities

• Perform market research to understand the various industries
• Develop new clients and Maintain existing clients
• Understand clients' recruitment needs as well as to provide the neccessary advices to clients if required
• Delivery of new positions brought in and communicate closely with the Consultant Team to ensure they understand the position's requirement for sourcing purpose
• Perform negotiation with clients as and when required
• Attend networking session as and when required

Requirements

• Proficiency in Japanese language to liaise with Japanese speaking clients and stakeholders
• Candidate must have at least 2-3 years of solution / service sales experience
• Candidate who is flexible, adaptable to changes, willing to learn and improve, self-driven and a team player will have a distinct advantage

To Apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Lim Yoke Hui

EA Personnel Registration Number: R1433821

EA License no.: 07C5771

Job Overview:

As a Business Development Manager specializing in baby food products, your primary responsibility is to drive the growth and market presence of our baby food product line. You will play a key role in developing and executing strategic plans to expand our market share, build strong partnerships, and achieve revenue targets.

Key Responsibilities:

Market Analysis

• Conduct thorough market research to identify trends, customer needs, and competitor activities in the baby food segment.
• Analyse consumer preferences and insights to inform product development and marketing strategies.
• Strategic Planning:
• Develop and implement effective business strategies to achieve sales and revenue goals.
• Identify new business opportunities and potential partnerships to enhance the baby food product portfolio.
• Product Development:
• Collaborate with the product development team to create innovative and nutritionally sound baby food products.
• Ensure product offerings align with regulatory standards and customer expectations.

Sales and Distribution:

• Build and maintain strong relationships with key retail partners, distributors, and other stakeholders.
• Develop and execute sales plans to expand the distribution network and increase product visibility

Brand Promotion:

• Work closely with the marketing team to create compelling brand messaging and promotional campaigns.
• Implement marketing strategies to increase brand awareness and customer loyalty.

Customer Relationship Management:

• Engage with key clients and customers to understand their needs and feedback.
• Address customer inquiries and concerns promptly to maintain a positive brand image.

Financial Management:

• Develop and manage budgets related to business development and sales activities.
• Monitor and analyze financial performance against set targets.

Qualifications:

• Bachelor's degree in Business, Marketing, or a related field. MBA is a plus.
• Proven experience with a min of 3 years’ in business development within the food or consumer goods industry, with a focus on baby products preferred in the FMCG industry.
• Strong understanding of market dynamics and consumer behaviour in the baby food sector in the Singapore industry.
• Excellent management, communication, negotiation, presentation skills and strong market acumen.
• Ability to lead cross-functional teams and collaborate effectively.

Key Performance Indicators (KPIs):

• Revenue growth in the baby food product category.
• Expansion of market share and distribution channels.
• Successful implementation of strategic initiatives.
• Customer satisfaction and feedback.
• Join us in creating nutritious and delightful experiences for our youngest consumers!

Kim Yew Integrated is a leader in providing world-class integrated facilities management solutions. We believe in moving ‘Ahead Together’, leveraging our tailored services, exceptional customer experiences and FM technology to bring businesses and society ahead so we can all live better together.

We are looking for an experienced and highly motivated Business Development Manager to join our team and help drive our business growth.

Responsibilities

1. Identify new business opportunities, with familiarity on portals such as Gebiz, Sesami etc.
2. Develop Business Proposal, tender submission, attend site briefing, reporting of opportunities.
3. Collaborate with internal teams, including QS, engineering, marketing, and operations, to develop customized solutions and compelling business proposals for clients.
4. Prepare and deliver professional PowerPoint presentations and pitch materials, showcasing the company's capabilities and value proposition.
5. Manage and monitor the sales pipeline, ensuring timely follow-up and progress tracking on leads and opportunities.
6. Report to management on bid status

Requirements

1. Diploma / Bachelor's degree in Engineering, Marketing, Business, or a related field in Integrated Facilities Management.
2. A minimum of 2 years of proven experience in business development or sales within the integrated facilities management industry is preferred.
3. Excellent written and verbal communication skills, with the ability to create persuasive business proposals and presentations.
4. Strong interpersonal and relationship-building skills, with a customer-centric mindset and a passion for delivering exceptional service.
5. Demonstrated ability to identify new business opportunities and develop innovative solutions to meet client needs.
6. Proficient in Microsoft Office Suite, including PowerPoint, Word, and Excel.
7. A self-starter with strong problem-solving, decision-making, and time-management skills.
8. Willingness to travel as needed for client meetings, presentations, and industry events.

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.