SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Integration diverse team of talent. You will be responsible to manage integration of all modules’ processes and the respective derivatives.

What you working on:

• To provide a leading role in the developing, transferring and maintaining of advanced CMOS fabrication technology with good process capability and high yield.
• Lead new technology transfer from mother fab or process development.
• Owner of new tapeout prototype lots and ensure 100% success rate.
• Drive process robustness improvement by providing root cause analysis and and collaborate improvement actions to meet 100% wafer acceptance test (WAT) Cpk goal & Baseline D0 target.
• Drive process excursion control by providing root cause analysis to modules and collaborate improvement actions to meet wafer acceptance test out of control % / out of specification % (WAT OOC%, OOS%) goal and single wafer low yield (SWLY) and single lot low yield (SLLY) goal.
• Collaborate with product engineer on product sensitivity related low yield and plan to do product specific process tuning to meet baseline D0 target
• Work with Customer Engineering to resolve customer complaints and provide customers with required information to meet customer concern and satisfaction & customer caution index (CCS & CCI) goal.
• Adhere to all FAB change management, safety & ISMS procedures
• Continuous improvement in d0, WAT performance, new tape-out (NTO) success and people efficiency.
• Ensure safety awareness
• Lead sub-team in x-functional continuous improvement projects.

More about you:

• Degree in Electrical/Electronics/Microelectronics/Material Science/Materials Engineering/Physics Engineering
• At least 2 years of relevant PI/Yield Engineering working experience in semiconductor manufacturing environment
• Strong understanding of device physics, advanced semiconductor process and SPC
• Strong analytical and problem solving skills to lead 8D team for corrective and performance actions
• Proficient in Microsoft business applications
• Proficiency in PROMIS system, Klarity ACE & DataPower will be an added advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:

• Assist in the design, operation, control and optimization of chemical / biological processes systems used in manufacture of API and biologic products.
• To be part of the commissioning and qualification effort of the process equipment and associated systems.
• Assist in Design, install and commission new production units, monitoring modifications and upgrades and troubleshooting existing processes
• Participate in improvement efforts leading to higher process capability and production volume while maintaining and improving quality standards
• In a cGMP environment, lead modifications and changes to processes and equipment, troubleshooting, deviation investigation, identification and completion of corrective and preventative actions.
• Assist Senior Engineer in proposal and evaluation modifications to equipment, processes and operations to improve safety, increase efficiency and enhance company goals.
• Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs and changeovers
• Actively engaged in developing specifications for process equipment and assist in FAT / SAT of related equipment as part of the new build-outs.
• Participate and lead, when required, in all investigations (contaminations, deviations, and discrepancies) relating to the manufacturing process.
• Provide operational support for the successful and uninterrupted operation of manufacturing.
• Other duties as assigned by manager

Requirements:

• Diploma/Degree in Science, Mechanical/Chemical Engineering or a relevant discipline. At least 1-2 years related Pharmaceutical experience preferred. Fresh graduates or with pharmaceutical internship are also welcome to apply.
• Good interpersonal and communication skills.
• Ability to multitask and hands-on approach
• Reliability, responsibility, and personal integrity
• Self-motivated and willingness to learn
• Creative Thinking

Senior/Process Design Engineer (Wastewater Treatment)

Our client is a leading environmental solutions firm with strong expertise in EPCC, O&M and design & build. In line with their growth and expansion, they’re now looking for a Senior/Process Engineer to join their dynamic organization during an exciting time in their development.

Job Responsibilities

• Be responsible for designing, implementing, and optimizing wastewater treatment processes and systems
• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum Degree in Chemical Engineering, Environmental Engineering or related field
• Possess process/mechanical design experience with wastewater treatment projects
• Must be willing to be hands-on to be on site occasionally
• Must be able to draw and review drawings (i.e. create process flow diagrams (PFDs), piping and instrumentation drawings (P&IDs), perform detailed calculations related to plant process design)

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Key Responsibilities:

• Assist in evaluating manufacturing processes by supporting research programs, applying knowledge of product design and materials, and collaborating with operators and vendors.
• Help design and develop manufacturing processes for new products and enhancements, including related tooling and fixtures.
• Support process troubleshooting and refinements to improve product throughput and assembly techniques.
• Contribute to improving manufacturing efficiency by analyzing workflow, space requirements, and equipment layout.
• Participate in process qualifications and validations, including equipment qualifications and material specifications.
• Assist in ensuring product and process quality by supporting the design of testing methods and confirming manufacturing processes.
• Provide manufacturing decision-making information by assisting in calculations of production, labor, and material costs, and reviewing production schedules.
• Help prepare product and process reports by collecting, analyzing, and summarizing information and trends.
• Assist in keeping equipment operational by coordinating maintenance and repair services, following manufacturer’s instructions and procedures.
• Support Health & Safety initiatives in assigned areas, including accident investigation and corrective actions.
• Research state-of-the-art process technologies and evaluate their potential benefits.
• Participate in Validation Activities as directed.
• Assist in maintaining compliance with ISO 13485, GMP, and FDA regulations.

Education/Experience and Qualifications:

• Bachelor’s degree in Engineering or a similar technical field.
• Up to 2 years of experience in a high-volume production environment; experience in medical device manufacturing, particularly catheter production, is a plus.
• Strong interpersonal skills with the ability to communicate effectively at all levels within the company.
• Basic understanding of DOE and statistical techniques.
• Familiarity with process capabilities and control charting is preferred.
• Exposure to writing protocols for validations and qualifications, including FMEA and IQ/OQ documentation.
• Awareness of GMPs, ISO 9001, ISO 13485, and Medical Device Directives.
• Self-motivated and eager to drive change and innovation. Must be comfortable working in a fast-paced environment with minimal supervision.

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Project Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Perform activities such FAT/SAT and Installation verification for new equipment and modification of existing equipment.
• Review of Vendor Turnover Packages and Construction Trade Turnover Packages.
• Review Functional specifications
• Assist with execution of qualification protocols for IQ, OQ.
• Draft and execute commissioning protocols related to production equipment in upstream/downstream processes
• Support Change Control and deviation management processes
• Coordinates with other departments for efficient completion of projects.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Description

As a NAND CMOS Process Integration Engineer in the Singapore Technology Development department at Micron Technology Inc., you will be responsible for developing 3D NAND CMOS devices scaling and enhancing their performance, reliability and manufacturability.

Responsibilities:

• Develop and innovate critical CMOS modules. Drive multi-functional teams to optimize existing process flows and develop new innovative solutions to meet product requirements and manufacturability.
• Develop/re-define critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Extract and analyze inline, probe, parametric, reliability, and other critical metrics and predict future behavior of the CMOS device performance of the product to enable early innovative solutions to meet product and device specifications.
• Early introduction, characterization and validation of new CMOS device models and test structures for developing future NAND products.
• 3 dimensions analysis with the use of K2 view to extract layout information and combine with the doping profiles of each implant step for product development and integration solutions.
• Interact and collaborate with TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Coordinate activities at manufacturing site towards gating experiment funding, conversions, and effectively communicate decisions made to all R&D, manufacturing, and relevant partners.
• Take on leadership role at quarterly yield summits and monthly program reviews in summarizing complex problems, deriving and explaining actions taken to address them and getting R&D, manufacturing, and senior management teams on the same page.
• Assist in the transfer of a new technology from R&D to manufacturing and contribute towards ensuring successful ramp and qualification. Supporting the transfer, documentation and training of module fundamentals into manufacturing.

Requirements:

• MS or PhD in Electrical Engineering preferably specialized in Microelectronics and Semiconductor Device Physics. Prior technology development and tech transfer/manufacturing experiences are preferred.
• Fresh MS/PhD candidates with knowledge of semiconductor process Integration, device physics and CMOS engineering.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Ability to develop a strong, holistic, end-to-end understanding of CMOS device and its related module on NAND technologies, related structural and electrical fail mechanisms.
• Deep understanding of probe failure mechanism, ability to do electrical bench data collection.
• Self-motivated, self-governing with proven ability to work in a demanding and dynamic environment.
• Experienced in coordinating cross-functional teams to achieve a goal.
• Solid data analysis, communication and reporting abilities with demonstrated presentation abilities.
• Curiosity and natural tendency of learning new things independently.
• Ability to travel for extended periods of time to the US for collaborative R&D work.

Working Location: Fab10, 1 North Coast Drive, Singapore 757432

Responsibilities:

• Ensure the sputtering machine is tuned to operate at maximum capacity without compromising performance. 
• Adjust the sputtering parameters to maintain high-quality output, minimizing defects and inconsistencies. 
• Regularly monitor and maintain the sputtering equipment to ensure it remains in optimal condition. 
• Optimize the sputtering process to maximize the efficient use of materials, reducing waste. 
• Work closely with teams from different departments to ensure smooth operations and address any cross-functional issues.  Analyze data from the sputtering process to identify trends, issues, and areas for improvement. 
• Based on data analysis, make precise adjustments to the sputtering machine to enhance performance and quality. 
• Implement a continuous improvement approach to keep refining the sputtering process and achieve better results over time.

Requirements:

• Diploma in Degree in any Engineering fields with 3-4 years in the manufacturing process monitoring experience.
• Fresh Degree in Chemical Engineering/Material Science.
• Good understanding for Sputtering-related knowledge such as PVD, CVD processes.
• Strong analytical skills with exposure to software tools (Minitab, Microsoft Office).

To apply, please click "Apply Now" or visit www.gmprecruit.comand search for job reference: 21168

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

• Generate service and spare parts quotations based on customer inquiries and needs.
• Carry out service tasks, including performing repairs and commissioning of gas and water quality analyzers, CEMS, and AQMS both in-house and at customer locations.
• Troubleshoot and offer recommendations for analyzer issues, ensuring solutions comply with company's standard procedures and safety regulations.
• Build and maintain positive relationships with customers, providing them with ongoing technical and service support.
• Collaborate with customers to address service-related concerns and offer tailored technical solutions.
• Assist the project team in executing Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) for projects.
• Identify new opportunities to expand preventive maintenance and service contract offerings.
• Provide training on product usage and features to end users and distributors.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Responsibilities:

• Provide Technical expertise with respect to Emerson DeltaV or Rockwell Automation PLC/HMI system and software and in particular configuration in the company.
• Support software/hardware modification pertaining to the site Automation systems.
• Perform any modification/changes in terms of Hardware/Software in accordance with site GMP quality requirement.
• Support field troubleshooting with other internal Stakeholders.
• Interact with other departmental stakeholders like Quality, Engineering, Manufacturing as well as other staff within MSAT department on automation related enquiries.
• Support testing Factory Acceptance Tests (FAT), Commissioning and Qualification in accordance with site GMP quality requirement.
• Support other technical changes and duties such as On Call/Shift duty as required
• Support Modbus/Devicenet/Profibus/Fieldbus and other types of devices communication protocol/devices in terms of troubleshooting/modification/addition. Support Variable Frequency (VFD) commissioning/modification and validation

Requirements:

• Minimum 3 years’ experience working with bio manufacturing projects
• Knowledge/Proficient in DeltaV is a must.
• Knowledge of site GMP quality requirement will be a plus
• Knowledge of upstream manufacturing will be a plus
• Pharmaceutical related experience preferred
• Must be team player, self-starter, curious with strong analytical and organizational skills
• Experience in upstream / downstream / Central services process operation will be a plus
• Experience in equipment design for process equipment will be an advantage.
• Experience in driving stainless steel equipment projects is a plus.

Based in Tuas.

1 year contract. Option to extend/annual renewal depending on performance

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

About our client: Our client is a leading international chemical manufacturing company.

About the role: The Production Engineer is responsible for improving the production technology of the upcoming plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures, and operation condition sheets in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, troubleshooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utility consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grades, new processes and equipment with the Production Technology Engineer.
• With a feasibility study, optimize plant operating efficiency, yield optimization, and energy conservation. Then, conduct the necessary field tests to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measures for customer complaints in a technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ findings and recommend modification, improvement, and potential investment projects such as debottlenecking, and environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with the technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked-up P&IDs and the required technical information for cost estimation purposes.
• Coordinate with the Technical department all plant improvement and modification activities working closely with the Technical Process engineer to prepare detailed
• engineering design, preparing specifications and requisitions for major equipment purchases, reviewing vendors’ documents, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with the Technical department for regular updates of P&ID’s, and instrument list, and equipment list.
• Communicate with the global process improvement team to build synergy for further technical updates of new plant.

About you:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.
• Demonstrated skill to in leadership, developing others, and working in a team-based environment.
• Outstanding verbal and written communication, presentation, interpersonal, creative thinking, consulting, and analytical skills.
• Excellent communication skills
• Ability to prioritize work to manage multiple projects to meet deadlines.
• Excellent problem-solving/decision-making skills.
• Ability to multi-task

Preferred qualifications:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction processes, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programing and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

*Please note that only shortlisted candidates will be contacted

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

[Order Number:671284]

Responsibilities

• Support customers' engineers in developing Dry Etch processes.
• Create or refine process formulations, determine equipment requirements, and review techniques used in manufacturing and evaluation.
• Collaborate with engineering and scientific teams to align process designs with technical requirements.
• Analyze test data to establish specifications and acceptable limits for materials and processes.
• Define and manage projects involving new concepts, automation technologies, and process improvements.
• Work closely with cross-functional teams to resolve process and integration challenges.

Requirements

• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication and interpersonal skills.
• Detail-oriented, organized, and resourceful team player.
• Self-motivated and capable of working independently with minimal supervision.
• Comfortable working in a cleanroom environment.
• Experience in project management is a plus.

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Liew Lee Hui

EA Personnel Registration Number: R22109864

EA License no.: 07C5771

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

About our client: Our client is a leading global pharmaceutical manufacturing company.

*This role will be hired on a 1 year contract to support our client's project, with possible extension / renewal*

About the role:

• Demonstrate the ability to lead technical projects from concept through implementation in collaboration with the Process Engineering team.
• Perform activities such as incoming goods inspection (IGI), FAT/SAT, and installation verification for new equipment and modifications to existing equipment.
• Assist with the execution of qualification protocols for IQ and OQ.
• Support all phases of engineering project implementation to ensure alignment with scope, schedule, budget, quality, and safety requirements.
• Be capable of reading and understanding PCS7 Functional Specifications, ensuring they are fit-for-purpose and aligned with business needs.
• Coordinate with the Automation team, as well as with manufacturing and MSAT teams, for improvements or implementing changes related to software FAT.
• Collaborate with engineering consultant firms and process engineers to support and complete tasks within the schedule for new and modified equipment, including:
  o Reviewing P&IDs, standard detail drawings, URS, etc.
  o Involving in Factory Acceptance Testing (FAT) of all process equipment, when applicable.
  o Coordinating inspection site installation of new equipment upon delivery.
  o Reviewing Vendor Turnover Packages and Construction Trade Turnover Packages.
  o Reviewing functional specifications.
  o Participating in Software FAT using PCS7, if applicable.
  o Assisting in commissioning and qualification of new or modified equipment in Cell Culture or Downstream (Purification) areas, including reviewing and executing C&Q documents.
• Target delivery of results on the first attempt.
• Adhere to applicable Environmental, Health, and Safety (EHS) requirements.
• Commit to maintaining fair and respectful relationships with others and behaving according to the company's code of conduct.
• Perform other duties as assigned by process engineering team members or management.

About you:
• 3 to 5+ years of experience in Upstream/Downstream bioprocess operations and demonstrated experience in equipment design within the pharmaceutical/biopharmaceutical industry.
• Experience in an engineering role supporting cGMP operations in a pharmaceutical/biopharmaceutical manufacturing plant is highly desirable.
• Experience in the design and operation of biopharmaceutical manufacturing equipment and facilities.
• Experience in the management and coordination of engineering and construction management consultants, equipment vendors, and contractors.

Key Skills and Competencies:
• Process and equipment knowledge of biological drug substance manufacturing processes; expertise in downstream unit operations is highly preferable.
• Knowledge/experience in change control management and deviation investigation & closure.
• Understanding of equipment commissioning, various stages of qualification, and process activities.
• Thorough knowledge of current Good Manufacturing Practices (cGMP) and Good Engineering Practices (GEP).
• A solid understanding of design principles and standards within biopharmaceutical facilities.
• Strong knowledge of sanitary design aspects of biopharmaceutical manufacturing equipment.
• Ability to communicate effectively, both in writing and orally, at all levels.

*Please note that only shortlisted candidates will be contacted.*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

• Contribute to the completion of project milestones, organize own work to meet project task deadlines and communicate progress on scheduled projects.

• Lead or support major equipment related investigations and implement equipment corrective or preventative action and performance improvements.

• Organize testing associated with the development of new process technologies and the support of new product introductions and tech transfers.

• Ensure integrity and compliance of data according to Standard Operating Procedures.

• Coordinate all work on scheduled projects (personnel activities, documentation and outside resources).

• Perform other tasks necessary to support site compliance to Center and regulatory requirements.

• Support cleaning program by performing swabbing and visual inspection of equipment.

• Assist in document preparation and training.

Interested applicants please email a copy of your resume to [email protected]

Tele @jesswongie OR WA 96503173

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities

• Leading the design, development and characterization of new tools and identifying and closing any hardware and procedural gaps.
• Innovate solutions that enable best in class performance
• Oversee installation and upgrades of tools ensuring quality of work, cost control and alignment to project schedule.
• Engage equipment vendors to improve current products and implement roadmap needs.
• Work with Process Engineers, Manufacturing, Procurement, and Vendor partners to develop a comprehensive package capable for our volume manufacturing sites.
• Generating and maintaining documents that outline equipment performance, operating procedures, maintenance specifications, and cost metrics.
• Support Internal And External Audits

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)