Are you curious about the advancement of technology that enable millions of devices to be created on a single silicon chip the size of your finger? Are you pursuing to become a wafer fabrication expert in a fully integrated process chain? Look no further as UMC Process Integration Engineer position is the perfect fit for you.

UMC Singapore is expanding its production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. We are looking for Process Integration Engineer to maintain customer production by ensuring stable wafer quality and on-time wafer delivery through process integration and daily management. This position provides excellent opportunities for growth and development.

Responsibilities

• Introduce customer's new product to FAB and support in new product's tape out procedures to ensure pilot success.
• Improve new Product yield and ensure mass production inline, WAT and CP yield stable
• Define standard operation procedure for daily job
• Co-work with module engineers to solve production related issues. (inline, WAT, yield and reliability...)
• Co-work with module engineers to develop customized process to meet customer special requirement

Qualifications

• Possess at least a bachelor's degree in Electronic Engineering, Electrical Electronic Engineering, Physics, Material Science
• Study in specialized in wafer chip or related semiconductor course
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• Semiconductor device process engineer background is preferred
• Semiconductor foundry experiences is preferred

Roles & responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/Construction Subcontractor, etc. for Detail Design Development

2. Review Structural Analysis and Calculation carried out by design consultant and develop simple structural calculation for temp. works

3. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, Shop drawing development

4. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, and Strutting etc.

5. Check/Rectification of all the structural drawing/ shop drawing if required

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline;

2. Minimum 3 years of experience in Civil and Structural Engineering especially for LTA Project

3. BE well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure

4. Be well-aware of Underground Structure/Construction Sequences and related civil design works

5. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards

* Candidates who has experience as CS Engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

• Position: HSE Officer/Engineer/Lead
• Location: Gul Road (company transport provided)
• Working hours: 5.5 days work week
• Salary (commensurate with experience): Up to $6,000 + Performance Bonus (Up to 6 months) + Flexi Benefits + OT pay (if required)
• Duration: Permanent
• Industry: Marine & Construction Engineering (Listed & MNC Company)

Main Responsibilities:

• Ensure provision of the Act and Regulations are complied with
• Promote safe conduct of work in the yard
• Liaise with WSHO or Safety Coordinator on the matter with regards to safety, health and welfare of people working in the yard
• Conduct Safety Induction Programme
• Ensure that appropriate personal protective equipment is used by the employees, contractors' workers and visitors
• Conduct inspection tours at worksite
• Report any unsafe conditions, equipment and housekeeping
• Apply permit to work system as required by the procedures and regulations
• Liaise with subcontractors’ safety supervisors with respect to safety of work undertaken by subcontractors
• Ensure that all records of safety equipment are in order and properly maintained
• Assist WSHO in the event of any incidents
• Any other ad-hoc duties assigned

Requirements:

• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only
• Minimum Diploma in Workplace Safety & Health/Engineering or related discipline
• Minimum 3-5 years of experience in marine shipyard operations
• Ensure compliance with all legal and regulatory requirements

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Equipment Engineer (Wet) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Copper Plating and Wet Etching process equipment working principle and how critical parameters will impact process and to work together with process counterpart to resolve complex integration issues
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance of Copper Plating and Wet Etching equipment
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Self-audit and update specifications to meet company Quality Standard requirements
• Provide long term solution to address daily issues. Resolve department hardware chronicle issues.
• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory
• Other ad-hoc duties as assigned

Requirements

• Minimum bachelor’s degree in electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• At least 3 years of relevant experience in equipment engineering, preferably in a semiconductor/LCD/Electronics / Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Candidates with no prior experience will be considered for junior position
• Proven ability to identify, assess and solve problems

Preferred Qualifications

• Prior experience in Advanced Packaging/LCD/foundry or similar industry background with SABRE/STRATUS/GPTC/SSEC experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

• Position : Sales & Project Engineer (Equipment) – Up to $4,000 Basic – Boon Lay - No Experience Required!
• Location : Boon Lay
• Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM
• Salary (commensurate with experience): Up to $4,500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided
• Duration : Permanent
• Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Execute and follow through the sales plan set by the manager with the aim to expand the company’s customer base and ensure its strong presence in Singapore.
• Work as a team to gather information to submit tender.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Any other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Engineering
• Minimum 1 year of related experience or no experience is welcome too!
• Must posses Class 3 Driving License
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Responsibilities:

• Report to Project Manager /Site Manager for the Arrangement of work
• Liaise with consultants for the submission and approval of materials and shop drawings
• Responsible for planning, programming and monitoring of work progress on site
• Co-ordinate the inspection work by Resident Engineer and clerk of works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors
• Structure and Architectural work
• Set up accounts and workstations .
• Monitor performance and maintain systems according to requirements .
• Troubleshoot issues
• Ensure site safety and proper execution of site work procedure on site
• Willing to work on Sites (under hot sun)

Job Requirements:
Degree/Diploma in Mechanical Engineering or related
Preferably 3 years of experience on project management and building construction projects
Good communication and interpersonal skills
Software skills on MS Project and ACAD preferred

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics
• Min 2-3 years of relevant work experience in Etch Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

• Position: HR Assistant (Learning & Development)
• Location: Gul Road (company transport provided)
• Working hours: Monday to Friday (8am - 5.30pm)
• Salary (commensurate with experience): Up to $3,500 + Performance Bonus (3-6 Months) + Flexi Benefits + OT pay (if required)
• Duration: Permanent
• Industry: Marine & Construction Engineering (Listed & MNC Company)

Main Responsibilities:

• Assist Career Conversion Programme (CCP), including programme structures, stakeholder management and project operations
• Assist the funding grants and Employee Benefits programmes
• Administer full-cycle of scholarship programmes
• Assist and support in collaboration with Government Agencies and Institutes of Higher Learning (IHLs)
• Support in talent development programme to support company’s retention / growth and succession planning
• Assist in monthly HR reporting
• Liaise with the union for activities, handle new membership registrations, removal of resignees and update of monthly bills
• Any other ad-hoc duties assigned

Requirements:

• Bilingual in both English and Mandarin to converse with Mandarin speaking clients
• Minimum Diploma in any field
• Experienced in government grant application
• Proficient in Excel

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description Account Assistant (AR)

• Handle accounts receivables to ensure timely billings and collection from customers.
• Data entry of all invoices/receipts into system
• Prepare Statement of Accounts (SOA) upon customer request.
• Work closely with project team to ensure monthly invoices and documents are submitted timely to Finance.
• Prepare monthly accounting schedules and reconcile general ledger.
• Prepare monthly bank reconciliation.
• Assist to follow up with clients/intercompany on outstanding invoices
• Record and apply incoming payments accurately into system
• Reconcile payment with invoices and resolve discrepancies
• Any ad hoc assignment that may assigned from finance manager/management from time to time.

Requirements:

• Candidate must possess at least a Diploma in Finance/Accountancy or equivalent.
• Minimum 1 year of relevant working experience.
• Detail, analytical, accurate and good with numbers.
• High level of integrity, initiative, drive, commitment and a sense of urgency.
• Mature, diligent and conscientious in meeting deadlines.
• Good interpersonal and communication skills.
• Able to work effectively in a team environment.

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

We are seeking an experienced Firmware Engineer to join our team to design, develop, and optimize firmware for embedded systems. The ideal candidate will have strong experience working with FPGA, ARM processors, and embedded software development using C, C++, and Python Scripting Skills. You will implement cyber security software / firmware solutions on ARM/FPGA based embedded systems.

Key Responsibilities:

●      Develop and maintain firmware for embedded systems, specifically targeting FPGA and ARM-based processors.

●      Design and implement real-time embedded systems using C, C++, and Python.

●      Write and optimize device drivers, board support packages (BSP), and low-level hardware interfaces.

●      Collaborate with hardware engineers to define system architecture and debug hardware/firmware integration issues.

●      Implement, simulate, and test FPGA-based firmware using tools like Verilog, VHDL, or SystemVerilog.

●      Work on bootloaders, and system diagnostics.

●      Perform unit testing and integration testing for firmware, ensuring system performance and reliability.

●      Contribute to code reviews, technical documentation, and design reviews.

●      Troubleshoot and resolve firmware issues, optimizing system performance.

●      Integrate and deploy AI/ML models (e.g., neural networks) into embedded devices for tasks such as anomaly detection, or predictive analytics.

Qualifications:

●      Bachelor’s or Master’s degree in Electrical Engineering, Computer Science, or a related field.

●      3+ years of experience in firmware or embedded software development.

●      Strong proficiency in C, C++, and Python.

●      Experience with FPGA design and implementation using Verilog, VHDL, or similar hardware description languages.

●      Hands-on experience with ARM processors (Cortex-A, Cortex-R, or Cortex-M series) and associated toolchains.

●      Familiarity with embedded Linux and/or RTOS environments.

●      Experience with hardware debugging tools such as JTAG debuggers.

●      Strong understanding of real-time embedded systems, including hardware/software interfaces, peripherals (PCIE, UART, SPI, I2C), and memory management.

●      Excellent problem-solving and communication skills.

Preferred Qualifications:

●      Experience with PCIe, DDR, or high-speed interfaces.

●      Experience with scripting languages like Python for automating testing and development processes.

●      Knowledge of networking protocols and interfacing.

●      Familiarity with secure boot, encryption, and other security measures in embedded systems.

●      Experience with AI/ML frameworks such as TensorFlow Lite, PyTorch, or Keras, and knowledge of how to optimize them for embedded systems.

●      Hands-on experience with neural network architectures (CNNs, RNNs, DNNs) and deploying them on resource-constrained environments.

• Performance Bonus: Our company recognizes and rewards high performance with competitive bonuses tied to your results.
• Restricted Stock Units (RSUs): We issue RSUs to contributors, offering you a stake in the company's success and aligning your interests with our long-term growth.
• Career Advancement Opportunities: We provide clear career progression pathways and support your development to help you reach your full potential.
• Collaborative Work Environment: Join a team that values innovation, collaboration, and continuous improvement.

Engineer, Automation

Singapore Headquarters | Full-Time | Hybrid

HOYA Electronics’ primary focus is on the development of optical and extreme ultraviolet (EUV) photomask blanks, which are critical components in the manufacturing process of the latest-generation chips used in various applications such as artificial intelligence, high-performance computing, and 5G. The company also manufactures a range of photomask blanks used in the production of chips for various applications such as memory, logic, and power devices.

Life at HOYA Electronics

HOYA strives to create innovations for a better future for people.

At HOYA Electronics, we are dedicated to innovation in the information technology segment, envisioning a world where all can thrive in harmony with nature. Our people are guided by our mission along with principles of commitment and innovation, influence every decision and action we take. We prioritize environmental protection, safety, and human rights, fostering diversity, inclusion, and employee well-being.

Be Empowered to Innovate and Develop for a Better Tomorrow with Us

• Experience an empowering and inclusive workplace that fuels your growth and development.
• Unlock your potential with abundant opportunities for skill-building and career advancement.
• Thrive in an environment that supports work-life balance and values your well-being.
• Receive fair and competitive rewards – your success is our success.
• We believe in recognizing excellence and celebrating your contributions.

Get to Know the Role

We are seeking an Automation Engineer who is capable of managing factory automation technologies. Your responsibilities will include troubleshooting systems, designing and testing automated equipment, and leading efficiency improvements using Lean Manufacturing principles. You will also need to maintain machine uptime, oversee new machine setups, and integrate equipment across plants, so we are seeking someone who has a keen eye for detail. You should also have strong project management skills, to ensure timely and cost-effective project delivery, as well and stay abreast of advancements in the industrial automation field to drive continuous productivity improvements.

Essential Responsibilities

• Understand factory automation technology and equipment such as robots, automated guided-vehicles and computerized manufacturing system, AMHS etc.
• Repair, troubleshoot advanced AMHS hardware, software and interface problems, maintaining the system to ensure full functionality and reliability
• Design, modify, implement and test automated machines, programs, jig and fixture to required job specification in an efficient and cost-effective manner. Lead in-house automation projects on layout, build, troubleshoot, repair and modify developmental and production equipment.
• Drive efficiency improvement using Lean Manufacturing approach to identify waste, improve/streamline process flow and automation improvements with team and/or with cross-functional team collaboration
• Lead and maintain overall machine uptime, monitor machine utilization and OEE index by identifying and eliminating the causes for recurring issues with CAPA implementation
• Setting up new machines, transferring of equipment at different plants and integration to existing system. Supervise installation crews and support the field installation work.
• Project management on cost, quality, scope and schedule to ensure on timely delivery of the project and within budget
• Participate in design and documentation reviews, update management on work progress and deviations
• Keep abreast of latest developments in industrial automation technology and introduce them to plant wide operations achieve cost savings and productivity improvements
• Any ad hoc duties assigned by supervisor/manager

Skills and Competencies Profile

• Degree or Masters in Engineering (Mechanical, Mechatronics, Electrical, Electronics, Automation, Industrial, Computer etc)
• At least 2 years relevant work experiences in a similar capacity and semi-con industry
• Hands-on experiences in working with cleanroom automated equipment, knowledgeable about cleanroom work environment and SEMI standards requirements
• Proficiency with CAD software: such as AutoCAD is essential, and others such as SolidWorks is good to have
• Knowledgeable of semi-con industry standard on equipment design, safety rules, operating and maintenance instructions and procedures.
• Able to read and interpret technical drawings, equipment manuals etc
• Creative thinker, proactive and able to demonstrate excellent project management and problem-solving skills
• Independent, self-starter with good written, communication and analytical skills
• Candidates with automation design, PLC experience, understanding of computer programming and software development are highly desirable
• Excellent experiences in handling and managing machine preventive/predictive maintenances and critical spare part controls, in order to minimize unplanned downtime

HOYA Electronics Singapore Pte Ltd is an equal opportunity employer. We are committed to building diverse teams and creating a safe and inclusive workplace that enables our people to perform at their best, regardless of nationality, ethnicity, religion, age, gender identity or sexual orientation, and other attributes that make every individual unique.

An offer with HOYA Electronics Singapore is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations.

HOYA Electronics Singapore does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with HOYA Electronics Singapore.

Responsibilities

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule, claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English

Able to draw 2D / 3D

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

• Position : Estimation Engineer (Aerospace) - Up to $4,500 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,500 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Responsible for providing complete analysis, estimate, and studies for all deliverables involved in the assigned scope.
• Identify design and constructability issues and analysis to determine constructability.
• Develop detailed cost estimates from engineering drawings.
• Act as a connection between subcontractors, design team and client.
• Determine required but non indicated scope through the analysis of site conditions and all contract documents (plans specifications, etc.)
• Collaborate with operations staff to ensure that General Conditions and Requirement items are appropriately captured in the estimate.
• Perform assessment on subcontractor proposals to ascertain if scope is covered.
• Assist in auto-cad drawings and drafting.
• Any other ad-hoc duties required

Requirements:

• Minimum Diploma in Mechanical Engineering or equivalent
• Minimum 3 years’ experience in the fields of engineering, manufacturing, servicing, and repair of aircraft tooling, GSE’s, and/or similar equipment.
• Sound working knowledge of engineering principles, GD&T, materials, surface & heat treatments, and equipment testing.
• Candidates with experience in a manufacturing environment including machining, steel and aluminium fabrication, welding and sheet metal work will have an advantage
• Proficient in Microsoft Office
• Bilingual in English & Mandarin to liaise with chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

SUMMARY
Represent the quality function of technical support, in conjunction with other internal support groups, regarding issues affecting manufacturing on global customer accounts. Serve as liaison between Jabil Circuit and suppliers or customers on global quality related issues.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Develop and maintain QA plans and timeliness of global new product introductions utilizing Advanced Product Quality Planning and Process Optimization specific to the customer.
· Provide support for all quoting activities by participation in initial process design, development, and implementation phases.
· Evaluate and provide input to inspection processes via inspection aids and instruction guidelines.
· Support all global training programs specific to their customer by development and implementation of specialized training sessions for all applicable functions.
· Develop appropriate systems for document storage, access and review pertaining to global customer accounts.
· Review all supplies, internal, and customer discrepancies, coordinate and track the effectiveness of corrective/proactive action efforts.
· Conduct periodic review and maintenance of all documentation files; develop appropriate systems for document storage and access.
· Review all supplier or customer discrepancies. Coordinate and track the corrective/preventative action effort.
· Participate in the vendor survey activities as applicable. Drive proactive participation with suppliers and (when possible) aid in their process improvement efforts.
· Interface with all departments as applied to the Policies and Procedures.
· Provide insight and assistance of implementing and maintaining Process Improvement and Optimization concentrating on proactive methodologies.
· Assist in driving the standardization of manufacturing processes of global customer accounts.
· Interface and provide technical support on quality issues with the customer as needed.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelor's degree required and five years related experience; or equivalent combination of education and experience.

A Business Development Executive - Corporate Solutions is responsible for building and managing partnerships with corporate clients and developing tailored solutions to meet their business needs.

This includes identifying market opportunities and strategizing solutions that align with our company’s product and service offerings. The individual will also collaborate with team members to ensure quality service follow-ups, offering comprehensive and well-rounded support to clients.

Your duties include:

• Sales and Business Development: Establish new business opportunities, via reaching out to potential clients. Conduct market research to stay informed on industry trends (e.g. competitor activities, client pain points), and to adjust pitches/approach strategy to clients accordingly.
• Solutions Development: Communicate with clients to identify their business challenges and expectations. Work with industry partners to provide customised solutions for clients. Prepare proposals and presentations for clients, ensuring clarity on service offerings and pricing.
• Client Relationship Management: Establish and maintain long-term relationships with corporate clients. Act as the main point of contact for addressing inquiries and resolving issues. Conduct regular meetings with clients to keep up-to-date on their evolving business strategies, and to adjust existing solutions when the need arises.
• Performance Tracking: Conduct regular monitoring and prepare reports on project statuses (e.g. the performance of implemented solutions, expected outcomes). Review ongoing results and devise new strategies accordingly.
• Collaboration: Work closely with team members, and provide support to their business activities (such as product knowledge, industry experiences and insights, solutions management).

Job Requirements:

• Diploma or Bachelor’s degree in Business, Marketing, Finance, or a related field.
• Proven track record in business development, with the ability to identify and capitalize on new market opportunities.
• Excellent negotiation, communication, and presentation skills for pitching tailored solutions to clients.
• Experience in conducting regular client meetings and providing updates on service offerings.
• Ability to work effectively in cross-functional teams and support team members by sharing insights and product knowledge.
• Ability to work independently and manage multiple projects simultaneously.
• Adaptability to work in a fast-paced and dynamic environment.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a ISEP Senior Engineer to be part of our Facilities Department diverse team of talent. You will be responsible to provide support pertaining to Environmental, Health and Safety to wafer fabrication for the company

What you will be working on:

• Familiar with WSH Act, Fire Safety Act and ISO 45001, ISO14001, SS651 so as to ensure compliance to these requirements, including Statutory Equipment & Licenses.
• Ensure that the EHS Management Systems are implemented, maintained, and compliant with all applicable local legislation.
• Ensure safety case implementation and mitigative measures for Safety-Critical Events (SCE) in Major Hazard Industries (MHI).
• Develop, maintain, and periodically test emergency response plans, conduct CERT audits, and lead emergency drills including training, maintain procedure and implement all the requirement.
• Compliance with regulatory and permit/ licenses requirements, through Monitoring & Measurement and standard, work to ensure proper management and accurate reporting.
• Implement of EHS programs to improve awareness and performance towards established goals actively.
• Manage EHS incidents and non-conformance investigations, ensuring corrective and preventive actions are tracked and closed.
• Schedule and coordinate EHS related meeting, inspection and audit (External / Internal)
• Manage, schedule and coordinate EHS trainings including training and revision of training materials.
• Manage EHS reports, EHS bulletin/Alerts Manage and other communications
• Revise and write EHS procedures and work instructions.
• Manage work permit system and contractors management.
• Any other duties as assigned by Manager

More about you:

• Minimum Diploma / Bachelor in Science or Engineering in Environmental, Chemical or equivalent
• Familiar with local regulatory requirements related to workplace safety and health, and all other aspects of safety.
• Strong understanding of chemical safety regulations, ISO45001, ISO14001 and SS651
• Certificates in EHS Internal Auditing (ISO 45001, ISO 14001, SS651) will be significantly advantageous
• Registered Workplace Safety and Health Officer and Fire Safety Manager

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

JOB SCOPE:

Design, develop and deliver working software applications to delight customers
Improve software quality using XP practices such as code review and unit testing
Adheres to the Software Craftsmanship Manifesto
Prepare architectural and other technical documents
Assist on: user stories elaboration, test automation and bug fixes, build and release automation

Requirements

Solid experience in any of technologies: Java, NodeJS, Ruby on Rails, .Net , Agile, ReactJs
Experience with version control systems such as Git, Continuous Integration (Bamboo/TeamCity)
Experience developing in Mac/Linux environment
Experience working in agile teams – TDD, Pair programming, Scrum, XP
Familiar with both Windows and UNIX/Linux servers, Design Patterns, Unit Testing

Job Description

We are looking for an accountable Construction Project Civil Engineer to be responsible for all engineering and technical disciplines that projects involve. You will schedule, plan, forecast, resource and manage all the technical activities aiming at assuring project accuracy and quality from conception to completion.

Responsibilities

Prepare, schedule, coordinate and monitor the assigned engineering projects

Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications

Interact daily with the clients to interpret their needs and requirements and represent them in the field

Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status

Assign responsibilities and mentor project team

Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support

Review engineering deliverables and initiate appropriate corrective actions

Requirements and skills

Proven working experience as a Civil Engineer

Excellent knowledge of design and visualisations software such as AutoCAD

Advanced MS Office skills

Familiarity with rules, regulations, best practices and performance standards

Ability to work with multiple discipline projects

Project management and supervision skills

Decision making ability and leadership skills

Current engineer license

Time management and organization skills

BS degree in Bulding Construction , Civil Engineering or others relevant degree

JOB SCOPE:

Design, develop and deliver working software applications to delight customers
Improve software quality using XP practices such as code review and unit testing
Adheres to the Software Craftsmanship Manifesto
Prepare architectural and other technical documents
Assist on: user stories elaboration, test automation and bug fixes, build and release automation

Requirements

Solid experience in any of technologies: Java, NodeJS, Ruby on Rails, .Net , Agile, ReactJs
Experience with version control systems such as Git, Continuous Integration (Bamboo/TeamCity)
Experience developing in Mac/Linux environment
Experience working in agile teams – TDD, Pair programming, Scrum, XP
Familiar with both Windows and UNIX/Linux servers, Design Patterns, Unit Testing

We are currently looking to hire Infrastructure Engineer (Mainframe System Admin). This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Type: One-year Renewable Contract

ROLES AND RESPONSIBILITIES:

· Ideally, at least 7 years of relevant work experience

· Plan, Install, Manage, and administer Mainframe, Upgrades and Maintenance

· Manage and deliver support for z/OS, DB2, IBM TWS, IBM RACF, IBM RMM, IBM SDSF, SMP/E, IODF.

· Hands-on experience in installing, upgrading, and administering IBM, CA and BMC products.

· Hands-on experience managing DFSMS suite – DSS, HSM, RMM, VTL and replication.

· Experience managing enterprise Mainframe Storage Systems – Disk and Virtual Tape

· Experience with Mainframe recovery, disaster recovery, troubleshooting, maintaining, and configuring using Mainframe LPARs

· Develop/Maintain/Improve in-house programs and utilities in COBOL, REXX.

· Experience with MF Data Center and MF network (VTAM, TCPIP and TN3270)

· Collaborate with other infrastructure teams, e.g., Storage, security teams, open systems, network, etc., to ensure applications running in DB2, and MQ can interface with applications on other platforms, e.g., WebSphere Application Servers on Linux

· Perform performance data collection, analysis, and tuning of Mainframe Systems.

· Implement project and internal initiative responsibilities as assigned or delegated.

· Participate in incident and problem management activities related to application and Mainframe Systems

· Diagnose and resolve environment system abends and abnormal operating problems using system logs and other available logs and documents.

· Perform problem diagnostics and resolution as well as change management.

· Collaborate with other team members within the same Information Technology (IT) departments, functional users, and vendors to provide guidance and supervise project implementation.

· Provide 24*7 on-call support Mainframe Infrastructure.

· Meet or exceed customer SLA.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Deepa Shivakoti

Reg No: R1765546

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

• As a Platform Engineer, your role is to design, develop, and maintain distributed applications using the Oracle Tuxedo middleware platform and other technologies.
• Designing and developing distributed applications using Oracle Tuxedo middleware platform.
• Writing efficient, scalable, and reliable code in programming languages such as C, C++, Java, or COBOL to implement application logic.
• Configuring and managing the Oracle Tuxedo environment, including setting up application servers, managing resources, and optimizing performance.
• Collaborating with cross-functional teams, including business analysts, system administrators, and database administrators, to gather requirements, design application architecture, and ensure seamless integration.
• Developing and maintaining documentation for applications, including code comments, technical specifications, and system configurations.
• Performing unit testing, debugging, and troubleshooting to ensure the applications meet functional and performance requirements.
• Conducting performance tuning and optimization of Oracle Tuxedo applications.
• Keeping up to date with the latest Oracle Tuxedo platform updates, technologies, and best practices in distributed application development.
• Providing technical support and guidance to other team members and stakeholders.
• Participating in code reviews and ensuring adherence to coding standards and software development best practices

- Manage construction activities, ensure compliance with design specification, quality standards and safety regulations

- Liaise with consultants, subcontractors and suppliers to resolve project matters

- Conduct site inspections and quality assurance checks to monitor construction progress and address any deviations from plan

- Communicate project progress and risks through regular meetings and reports

- Assist Project Manager in monitoring and managing the day-to-day operations of project

- Attend regular meetings with main contractors/subcontractors on the project related matter

- Candidate must possess Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent

- At least 1 to 3 years experience in the related field

- Ability to work independently with minimum supervision