• Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain, review and troubleshoot the process control system recipe / models. Guide process engineer in team for the process control system recipe / models development.
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review. Participate or lead quality / safety investigations and implement any corrective and preventive actions from these investigations.
• Develop, implement and monitor robust preventive measures for processing issues.
• Lead/ part of cross functional team for product transfer of new product on site and interface with above site and transferring sites to ensure flawless transfer of product to site.
• Able to carry out technical and/or GMP assessment for evaluation of processes.
• Lead/ part of team for product/ process transfer between the different process centric team for the commercial manufacturing and provide technical guidance to the process centric team and/ or operation team during the manufacturing.
• Play a pro-active role and lead changes in ensure the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel and stakeholders on process updates.
• Provide operating instruction and process training to different audiences such as operations, process team, quality operations and engineering.
• Own one or more multiple equipment / GMP systems in production and present the system overview with evidence compliance to internal and external auditors.
• Train the process technicians on the process and procedures as required.
• Ensure adherence to approved procedures and update procedures as required, including the principles and practices of good data management (ALCOA)
• Focus on Safety and GMP Compliance as operational priorities and as performance measures.
• Accountable for the Good Data Management and Data integrity understanding and performance.
• Report and investigate actions or behaviors that may negatively impact the desired outcome of the GMP process or activity.
• Play an active and impactful role to deliver flawless execution for respective PCTs (e.g. API, MS, QO, Leadership, Engineering) by updating performance against metrics, highlighting & resolving issues with appropriate escalations

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Job Responsabilities:

• Build and maintain advanced endpoint sensors on diverse operating systems including Windows and Linux
• Develop platforms and automation to deploy and manage endpoint sensors
• Develop backend data processing pipelines to process and analyse streaming data
• Build customer-facing web applications and API gateways to support the platforms’ use cases
• Propose innovative solutions to address cyber security use cases
• Design project roadmaps and perform project planning to achieve business outcomes
• Design and develop sensor deployment architecture in customers’ environments
• Configure and manage sensor environments, including operating systems, applications and network topology
• Participate in code and architecture reviews for developmental efforts
• Write complete technical documentation

Job Requirements:

• At least 3 years of experience as a Software Engineer or Cyber Security Engineer
• Hands-on experience in low-level systems programming
• Hands-on experience in C, C++ or Rust
• Hands-on experience in API or backend development
• Hands-on experience in frontend web development frameworks such as React or Next.js
• Demonstrated capacity to learn independently with minimal guidance on new technologies

Preferred Skills and Qualities:

• Cyber Security knowledge or experience
• Experience with low-level systems programming or kernel programming
• Experience with the Python programming language
• Experience with data engineering
• Experience with Assembly language
• Experience with firmware development
• Understanding of computer networking

Job Summary:

• Salary range : $4500 - $5500
• Working Days and Hours: Monday - Friday (8.30am - 6pm)
• Location of work: Somerset
• 1-month completion bonus upon completion of full year contract

Job Responsibilities:

• Responsible for conducting feasibility studies, market/customer needs analysis and financial analysis for electricity, utilities and related businesses. Specifically, the duties include:
• Conducting feasibility studies (Technical) of domestic and overseas projects/ investments, including economic (cost-benefit) analysis, project/ investment appraisal and project risk analysis
• Perform technical specifications review
• Provide engineering support for future developments of the group
• Participate in regulatory and statutory approval matters
  
  Requirements:
• Candidate must possess at least a Bachelor's Degree in Engineering (Electrical, Chemical, Mechanical)
• Minimum 5 years of relevant experience in Engineering/ Construction/ Oil & Gas industry
• Strong interpersonal communication and coordination skills

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON,

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Foo Kai Jing (Fiona)
Registration Number: R2199329
EA License No: 06C2859 (MCI Career Services Pte Ltd)

Quantitative Product Development Engineer (Trading)

Job Responsibilities:

• Actively participate in the development and maintenance of equity and futures products, ensuring consistent improvement in online service quality through technical solutions, and take responsibility for the reliability of live trading.
• Collaborate closely with researchers to enable various strategies, regardless of type or scale, to operate efficiently in live trading and generate substantial returns.
• Conduct research and integration of programmatic trading platforms, including implementing and deploying microsecond-level software solutions.
• Optimize the performance and latency of trading and order execution systems across dimensions such as computation, storage, networking, and hardware.

Job Requirements:

• Bachelor's degree or higher in Computer Science or a related field from a well-known domestic or international university, with over 2 years of work experience.
• Proficient in Linux operating systems and meet at least one of the following:a. Skilled in C++ and one scripting language.
  b. Skilled in Python 3 and one statically-typed language.
• Familiarity with production and iterative processes for online services, along with techniques for improving service reliability.
• Experienced with best practices such as Git, code review, and CI/CD, with a strong focus on tool-building and excellence in execution
• Experience in maintaining large-scale, highly complex, mission-critical products.Strong system design skills with expertise in performance, reliability, and availability.Hands-on development experience in any of the following areas: operating systems, databases, storage systems, or distributed systems.

Regret to inform that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R1878287

Business Registration Number: 201735941W.

Licence Number: 18S9037

We are seeking an engineer with opto-electronic product development experience, tasked with the mission of design, build and manufacturing of Si Photonics chips. The candidate must possess expertise in one of the following areas: opto-electronics, photonics, electronic circuit development, electronics board design, packaging design, or FPGA development.

Responsibilities

• Perform system-level optical and electronic test and measurements
• Prepare and develop prototype to products based on Photonics IC specifications and designs
• Source suppliers, establish supply chain and photonics manufacturing and collaborate with ODM/OEM/contract manufacturing partners

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics, Applied Physics, or a related discipline in Optics and Photonics
• At least 2 years of working experience
• Candidate is expected to have experience in any one of the following areas: circuit and system, FPGA Development, or Advanced Packaging
• Experience in commercial Si Photonics product design and product engineering is preferred.

THE ROLE:

We are the high-end test engineering team providing test solutions for Data Center Graphics (DCG) New Product Introduction (NPI) under the Product Engineering Organization. We do exciting product development for leading-edge technology that will power the next generation processors used for high performance computing, data centers, enterprise servers, and Artificial Intelligence clusters.

If you are looking for a fulfilling and challenging career as an engineer leading NPI System Level Test (SLT) Product Development, you are at the right place! As an MTS SLT Product Development Engineer, you will be responsible for developing and driving SLT solution to meet NPI business milestones and KPI (test time, yield, cost, quality). The expectation is to perform leadership through interaction with design teams, Product & Test Engineering teams, Customer Quality teams, software & platform teams to come up with the best solution that balance quality and cost. You will experience working with and learning from AMD’s talented engineering teams around the world.

THE PERSON:

We are looking for someone with strong technical, analytical, leadership and problem-solving skills, as well as demonstrating the characteristic of an independent and resourceful individual.

The applicant must have a proficient understanding of x86 CPU and GPU architecture and functionality, as well as a broad understanding of various industry standard bus protocols, such as DDR, PCIe, and USB.

KEY RESPONSIBILITIES:

• Accountable to drive and develop SLT test solution to meet business milestone, cost and quality in system level area.
• Solves complex, novel, and non-recurring problems; initiates significant changes to existing processes/methods and leads development and implementation
• Conduct engineering evaluations and analysis to drive closure of production issues
• Influences technical decisions that have a significant impact on final product
• Develop and apply new debug techniques to enhance technical depth in Product and Test Engineering
• Involves collaboration on or assuming the consultative or leadership responsibilities for a specific project or for product development initiatives
• May provide technical supervision or mentoring junior engineers
• Upscale overall team capabilities on low level system debug for AMD data center product families

PREFERRED EXPERIENCE:

• Strong knowledge and working experience on GPU architecture, X86 architecture, SoC design and power management features
• Experience and strong understanding into SOC (System-On-Chip), Firmware and Software interaction
• Software programming and scripting proficiency (C++, Java, Shell script, Perl, Ruby, Python)
• Proficiency in Windows, and Linux operating systems
• Experience with data center infrastructure is a plus
• Experience with board design, board level debug, post silicon electrical and mixed signal circuitries is a plus
• Familiar with using analyzers and oscilloscopes, and other debug tools is a plus
• Strong and effective presentation, written and verbal communication skills, and the ability to work with geographically distributed product engineering teams
• Excellent interpersonal, organizational, and analytical skills
• 5 years or more industry experience

ACADEMIC CREDENTIALS:

• BS/MS Electrical Engineering, Computer Engineering, or comparable disciplines

LOCATION:

Singapore

[Order Number:671284]

Responsibilities

• Support customers' engineers in developing Dry Etch processes.
• Create or refine process formulations, determine equipment requirements, and review techniques used in manufacturing and evaluation.
• Collaborate with engineering and scientific teams to align process designs with technical requirements.
• Analyze test data to establish specifications and acceptable limits for materials and processes.
• Define and manage projects involving new concepts, automation technologies, and process improvements.
• Work closely with cross-functional teams to resolve process and integration challenges.

Requirements

• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication and interpersonal skills.
• Detail-oriented, organized, and resourceful team player.
• Self-motivated and capable of working independently with minimal supervision.
• Comfortable working in a cleanroom environment.
• Experience in project management is a plus.

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Liew Lee Hui

EA Personnel Registration Number: R22109864

EA License no.: 07C5771

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

Key Responsibilities:

• Conduct comprehensive assessments of current production methodologies to identify opportunities for technological advancements that improve efficiency, safety, and product quality.
• Identify, evaluate, and integrate cutting-edge technologies to enhance operational efficiency, reduce waste, and ensure product quality. Present updates and results to stakeholders to showcase innovation progress.
• Plan, execute, and oversee engineering projects focused on innovating production processes through advanced technologies, ensuring timely and budget-conscious implementation.
• Implement rigorous testing protocols and quality control measures that leverage technology to uphold product safety and compliance with industry standards.
• Analyze existing processes to uncover inefficiencies, recommending innovative, cost-effective solutions that maintain quality and safety. Prepare and track budget estimates for technology upgrades and process improvements.
• Maintain detailed project records that capture design specifications, testing results, and performance evaluations, facilitating knowledge transfer and transparency in innovation efforts.
• Provide regular updates to stakeholders, emphasizing technological advancements, challenges, and overall project performance with a focus on innovation outcomes.

Job Requirements:

• Degree in Chemistry, Mechanical Engineering, or equivalent
• Minimum of 2 years in the packaging industry;
• Specialization in product development and process improvement with a strong emphasis on innovative packaging solutions.
• Proficient in Microsoft Office (Excel, Word, PowerPoint).
• Strong communication, problem-solving, analytical, planning, time-management, and multitasking skills.
• Knowledge of Project Management, Solidworks, and SAP would be advantageous.
• Excel in dynamic environments, demonstrating flexibility in response to technological changes and challenges.
• Anticipate and meet the evolving expectations of internal and external customers, striving for service excellence.
• Uphold high ethical standards, maintaining professionalism and reliability
• Collaborate effectively within teams to drive innovation and achieve business objectives.
• Monitor and track progress on innovative initiatives to ensure efficient and effective completion.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

The PTO Lead Process Engineer leads new product introductions and the transfer of drug products to other facilities of moderate/high complexity independently and is a coach for his/her colleagues on the commercialization and manufacture of all drug products. He/ she typically will assume the responsibilities of a technical product steward and leads/supports all technical/ process activities (for example) investigations, validation and qualification processes, risk assessments and process safety management activities under his/ her responsibilities. The PTO Lead Process Engineer also leads/supports continuous process improvement activities to enhance site performance metrics and provides advanced/expert knowledge to the site and across our global technical network (while leveraging on other site experiences / knowledge) and continuously expands on personal expertise. He/ she will also provide technical supply support independently. The PTO Lead Process Engineer is expected to possess advanced/expert knowledge of at least one process/platform technology and supports the objectives of his/her seniors and the direct supervisor.

WHAT YOU WILL DO

MAIN RESPONSBILITIES

• Leads new product introductions to the site by conducting process and equipment comparisons, new raw materials introduction, development studies, clinical supplies manufacturing, cleaning processes development/ validation and training of technicians as required. Identifies and implements strategies for PPQ matrixing, novel technologies and new products etc. Authors PPQ protocols, reports and other associated documentation related to a new product introduction. Expected to have an advanced knowledge of product development, scale-up and technical transfer, key supporting documentation and associated regulatory requirements. Anticipates and remediates quality issues and challenges from the technology transfer process. Demonstrates advanced knowledge in technical writing for investigations, change request, PPQ reports and CMC sections.
• Leads and/or supports the design and execution of small/ full scale experiments using appropriate methodology and/or simulations for products/ processes to evaluate the impact of proposed changes to validated equipment/ processes.
• Proactively identify solutions independently to address issues that arose during experiment/ evaluation
• Leads/ provides technical guidance in support of site and divisional capital projects and new facility start-up activities. Ensures that the process design is well thought-out and robust for routine manufacturing. Provide technical input independently to the process design to ensure its fit for purpose for routine manufacturing. Responsible to transfer the knowledge of the project and facility to IPT colleagues.
• Provides technical expertise related to the product, equipment and manufacturing/cleaning processes in response to deviations/ product complaints/ adverse events to identify point of occurrence, root cause and corrective/ preventative actions. Demonstrates ability to lead and resolve complex technical issues and investigations and resolve with minimal supervision.
• Provides technical expertise for compliance activities such as audit and regulatory support. Acts as primary regulatory representative with business partners and regulatory agencies for moderately complex products/ programs/ issues.
• Manages product portfolio activities and is expected to manage a project team for activities associated with the product portfolio. Examples (but not limited to) include managing documentation updates (e.g. SOPs, batchsheets, recipes), quality risk assessments, change control management/ filing support (if applicable) and validation activities such as equipment qualification, simple process validation and cleaning validation/monitoring activities. Expected to have an advanced knowledge of respective compliance topics related to the above-mentioned activities. Demonstrates good project management skills (e.g. define core team and activities, project scheduling, stakeholder management and issues escalation etc), and demonstrates the ability to manage/ influence the project team.
• Supports routine supply manufacture by providing on going technical support to the IPT, participates in Tier processes and implements opportunities for improvement utilizing MPS (Our Production Systems) tools. Ensures optimum production runs, identifies constraints and non-conformances and troubleshoots to resolve complex issues in production systems. In addition, conceptualizes process designs to troubleshoot and resolve complex operational or manufacturing issues and recommend enhancements to improve production runs and enable the continuously improvement of the product cost structure.
• Manages and performs the proactive monitoring of the performance of process parameters, critical quality attributes and equipment/module(s)/unit operation(s) performance during manufacturing and cleaning. This could involve leading/participating in Prospective Process Analysis (PPA), statistical analysis and response to shifts and trends in process performance. Undertakes responsibilities as an active site product steward and is a member of the Value Chain Technical Team where applicable.
• In addition, leads Continued Process Verification and participates in Annual Product review activities as part of product lifecycle management. Applies moderately complex statistical and risk analysis tools to evaluate actions required to ensure product robustness across applicable manufacturing equipment and processes.
• Demonstrates advanced understanding of product CPP, CQA, Cpk and sterile boundary of the current validated processes. Has good knowledge of the raw materials and PCC (product contact components) used for the products under his/her responsibility.
• Actively participates and shows commitment to collaboration and sharing of best practices across the global S&T network. Typically possesses advanced and/or expert knowledge in at least one platform technology/ process.
• Complies with all divisional and site-specific policies, guidelines and procedures.
• Demonstrates and promotes Environmental, Health & Safety (EHS) leadership behaviors, ensuring that all activities are carried out in accordance with EHS requirements. Actively participates in GEMBA safety walks. Leads/ participates process hazards analyses (PHA) and applicable Process Safety Management (PSM) activities related to new/inline products.
• Where applicable, develops SOPs, gap analyses and procedures for Quality/EHS subsystems/ topics in compliance with regulatory requirements, divisional and corporate policies and guidelines. Typically possesses advanced and/or expert knowledge in at least one compliance topic.
• Demonstrates leadership behaviors in alignment with our leadership standards (Individual Contributor). Practices Inclusion as the How.
• Leads personal career development with manager assistance through annual Performance Management Process (PMP), Employee Development Plan (EDP) and career mapping.
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

Qualification:

• Bachelor's degree in a technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences

Experience:

• Minimum 5 to 10 years technical experience in related pharmaceutical manufacturing industry.
• Demonstrated capability to successfully lead teams in complex projects.
• Expert knowledge of core technology/unit operations relevant to active pharmaceutical ingredient, Biotech and/or Non-Sterile manufacturing.

Leadership, Professional and Functional Competencies

• Demonstrate leadership skills in alignment with our Leadership Standards, focusing on build talent, fostering collaboration and drive results.
• Effective communication skills, both oral and written. Ability to work effectively on cross- functional teams as a leader or a core member.
• Strong Leadership capabilities, with desire for active people development in the organization.

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today.

As a Senior Engineer in PDE (Package Development & Engineering) at Micron, you will be responsible for the Advance Packaging success within your scope (MRDA) and guided by functional objectives, in terms of process, equipment and materials definition, development and/or optimization. You will be managing and optimizing your area's performance to meet or beat defined metrics. You will apply extensive knowledge to carry out tactics and collaborate with internal and external partners to build and implement packaging technology roadmaps aligned to corporate strategic objectives. You will provide advice to senior management related to tactical decision for the function. You will interact with executives, major customers and/or site managers to provide consultation, influence decisions and identify and resolve critical issues.

Identify, select, and evaluate new process, equipment and/or technology to support current and future requirements for MRDA area

• Define, development and establish new process, equipment design and/or capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new process, equipment capabilities and/or solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Actively participate in Package Development Engineering activities
• Conduct equipment benchmarking to establish the equipment suppliers and platforms for current and future need
• Create decision matrix for equipment and material selection
• Generates and set-up ADC, set-up/improve recipes
• Set-up PMON, Sampling Plans, BKM, CIP Strategies & performance indicators

Installation and qualification of new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional team
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives/personnel
• Establish the feedback loop for Continuous Improvement after mass volume production

Define, improve and/or maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

• Maintain knowledge of design constraints and weakness of existing platform
• Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:

• Bachelor or master’s in electrical engineering, Materials Science, Chemical Engineering, or related field. A PhD is a plus.
• 4 or more years of experience with proven track record of technical leadership in semiconductor manufacturing in Metro Real-Time Defect Analysis Process & Equipment Engineering. Experience in other Front-End areas, in Post Wafer Fabrication & High Bandwidth Memory technology
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill
• Excellent communication skills

Keen on the role? Apply now!

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

As a NAND CMOS Process Integration Engineer in the Singapore Technology Development department at Micron Technology Inc., you will be responsible for developing 3D NAND CMOS devices scaling and enhancing their performance, reliability and manufacturability.

Responsibilities:

• Develop and innovate critical CMOS Front end/interconnect module. Drive multi-functional teams to optimize existing process flows and develop new innovative solutions to meet product requirements and manufacturability.
• Develop/re-define critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Extract and analyze inline, probe, parametric, reliability, and other critical metrics and predict future behavior of the CMOS device performance of the product to enable early innovative solutions to meet product and device specifications.
• Early introduction, characterization and validation of new CMOS device models and test structures for developing future NAND products.
• 3 dimensions analysis with the use of K2 view to extract layout information and combine with the doping profiles of each implant step for product development and integration solutions.
• Interact and collaborate with TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Coordinate activities at manufacturing site towards gating experiment funding, conversions, and effectively communicate decisions made to all R&D, manufacturing, and relevant partners.
• Take on leadership role at quarterly yield summits and monthly program reviews in summarizing complex problems, deriving and explaining actions taken to address them and getting R&D, manufacturing, and senior management teams on the same page.
• Assist in the transfer of a new technology from R&D to manufacturing and contribute towards ensuring successful ramp and qualification. Supporting the transfer, documentation and training of module fundamentals into manufacturing.

Requirements:

• MS or PhD in Electrical Engineering preferably specialized in Microelectronics and Semiconductor Device Physics. Prior technology development and tech transfer/manufacturing experiences are preferred.
• Fresh MS/PhD candidates with knowledge of semiconductor process Integration and CMOS engineering.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Ability to develop a strong, holistic, end-to-end understanding of CMOS device and its related module on NAND technologies, related structural and electrical fail mechanisms.
• Deep understanding of probe failure mechanism, ability to do electrical bench data collection.
• Self-motivated, self-governing with proven ability to work in a demanding and dynamic environment.
• Experienced in coordinating cross-functional teams to achieve a goal.
• Solid data analysis, communication and reporting abilities with demonstrated presentation abilities.
• Curiosity and natural tendency of learning new things independently.
• Ability to travel for extended periods of time to the US for collaborative R&D work.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service manufacturing equipment for the semiconductor and display industries. Our innovations are at the foundation of the technology that transforms every part of our lives. We offer an exciting place to grow and learn alongside some of the best people you’ll ever meet. Join us to Make Possible a Better Future.

The Advanced Packaging Development Center (APDC) is a state-of-the-art cleanroom that is among the most advanced wafer-level packaging labs in the world. It houses the industry’s broadest portfolio of products that enable the foundational building blocks of heterogeneous integration, including advanced bump and micro-bump, fine-line redistribution layer (RDL), TSV and hybrid bonding. APDC was established as a joint lab partnership with the Institute of Microelectronics (IME), a research institute of Singapore’s Agency for Science, Technology and Research (A*STAR).

We are currently seeking for an experienced and passionate Process Engineer (R&D) to join APDC now. Apply now if you fit the description below!

Key Responsibilities

• Work closely with Process Integration, and the CTO USA team, hands on running wafers on semiconductor equipment using MES systems to run process operations.
• Design, create recipes, collect data, analyze and compile reports on moderately difficult process engineering experiments, within safety guidelines
• Perform hardware characterization on moderately difficult systems, within safety guidelines
• Troubleshoot moderately complex problems, perform Root Cause Analysis and resolve moderately difficult process engineering issues
• Measure film properties, organize data/reports for review and interpret data
• Generate internal documentation for products, presentations and technical reports
• Interact with customers to resolve moderately difficult process engineering issues/problems under general supervision
• Identify, select and work with vendors and suppliers under general supervision
• Implement new technology, products and analytical instrumentation

Requirements

• Relevant Engineering education qualification
• Research experiences focusing in semiconductor industry
• Past experiences in dealing with MES systems is a plus
• Stakeholder management
• Good communication and interpersonal skills

Work Location

• Science Park II

Job Responsibilities:

• Novel BCD platform device development.
• TCAD device simulation and deck calibration.
• Device test key design, layout, analysis.
• Device bench testing (DC/HV/reliability) and characterization.
• Device tuning, on time delivery, pass reliability qualification.

Required Capabilities:

• Solid semiconductor device physics and analysis skill, strong knowledge on bipolar and power devices.
• Experienced in BCD device development/ characterization is preferred.
• Hands on TCAD simulation/ calibration, layout skill, power device bench test is preferred.
• Good communication and team work skill.
• Self-motived and avid learner.

Qualifications:

• Preferred Master's or Ph.D. degree in Physics or Electrical Engineering.
• Relevant working experience in BCD development is preferred.
• Proficient in both oral and written English.

Join the Inkjet Systems Pte Ltd Family!

Are you looking for a stable, rewarding career with a company that values its employees? Inkjet Systems Pte Ltd is the place for you!

Why Work With Us?

At Inkjet Systems Pte Ltd, we believe in rewarding hard work with progressive wages and providing a safe, supportive work environment.

What We Offer:

• Full-Time Employment: Enjoy the security of CPF contributions and paid insurance.
• Compliance Assured: MOM-compliant workplace standards.
• Comfortable Work Environment: Work in a cool, airy, spacious, well-lit, and well-ventilated setting designed for productivity and comfort.
• Work-Life Balance: A five-day work week, so you have time for what matters most.

What We’re Looking For:
We’re seeking motivated team players who meet the following requirements:

• Reside within a 30-minute bus ride from our facility at 56 Loyang Way, Singapore 508775.
• Committed to punctuality, responsibility, and teamwork.

Your Next Step:
Become part of our innovative and forward-thinking team!

Apply Now:
Submit your resume to [email protected] or visit us at ecosam.sg to learn more.

Take the next step in your career with Inkjet Systems Pte Ltd—where your growth is our priority!

As a Process and Digital Consultant, you will identify the areas of process improvement and drive digital topics, along with supporting the organization in identifying the system or process issues and consulting on the solutions end-to-end on a daily basis.

You will:

• Discuss with business users, customers and identify the pain points and provide solutions - SAP, Digital, or PowerBI.
• Conduct workshops and continuously improve the Business processes.
• You will also be required to support Data driven initiatives, S/4 Rollout projects and other digital projects as and when require.
• Identify the opportunity of new digital solutions and market trends.
• Ensure you understand the market trends and business targets and bring ideas and solutions.
• Define KPIs, build Dashboards and reports with Celonis, Power-BI etc. for continuous process improvement.

PRISM+ is the largest Singaporean direct-to-consumer smart home appliances brand. Our mission is to offer cutting-edge products to the masses at affordable prices. We are a rapidly growing, ever-evolving organisation, and we are seeking new teammates to join us on our exciting journey.

The Ops Excellence and Planning Process Analyst is responsible for improving operational processes and systems to achieve the team's goals. This role involves setting engineering best practices, establishing training standards, and developing monitoring dashboards in collaboration with the OE Data Analyst.

Key Responsibilities:

• Implement changes to enhance efficiency and effectiveness.
• Identify, analyze and improve operational processes and systems.
• Establish and document engineering best practices.
• Develop and implement training programs to ensure adherence to standards.
• Collaborate with the OE Data Analyst to create and maintain performance monitoring dashboards.
• Utilize dashboards to track and analyze process performance.

• Experience in developing and implementing operational best practices.
• Familiarity with creating performance dashboards and tracking KPIs.
• Strong analytical skills with the ability to identify inefficiencies and recommend improvements.
• Experience in coding / programming will be a plus
• Proficiency in data analysis and visualization tools (e.g., Tableau, Power BI, Excel).
• Excellent organizational skills to manage multiple process improvement initiatives.