Job Description & Requirements

• Assist to ensure all M&E construction activities meets the performance and procedures and making recommendations for improvements and correction actions.
• Manage contractors with a focus on quality, compliance with engineering drawings, applicable code and standards and project schedule and cost.
• Work closely with draftsmen and all sub-contractors to carry out design, supervision and installation of the entire electrical installation, including testing and commissioning of all systems.
• Provide supervision and input to site projects with regards to site logistics, installation, safety, sub-contractors, quality, cost control and on-time reporting.
• Assist the Project Manager in developing and implementing corporate construction policies.
• Oversee the effective management of project activities to ensure timely delivery and low wastage.
• Liaise with internal department, government/Statutory Authorities, consultants, clients, suppliers to ensure smooth operation of projects.
• Assist in timely project progress reporting to Management and attending to all site meetings.
• Ensure business objective is obtained and complies with all relevant regulation and laws.
• Attending to all site meetings with owner, consultants and main contractors on all matters.
• Monitor the project progress and deliver project to the expected safety and quality objectives and ISO standards
• Manpower allocation to maximise productivity.

Requirements

• Diploma in Engineering majoring in Electrical / Power Engineering.
• Minimum 3 years of working experience.
• Those with potential will be groomed for a senior position.
• Those with many years of relevant experience may be considered a senior position.
• Those with M&E Construction Industry experience will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad and Primevera software will be an added advantage.

• Candidate should be capable to work with Marine Electronics, Communication and Navigational equipment e.g Marine Radars, ECDIS, VDR, GPS, AIS, MFHF, VHF, Satellite Systems, Speed Log, Echo-sounder etc on board vessel as well as at workshop.
• Candidate should have prior experience of repair, service, new installation, and commissioning of above listed items.
• Candidate with Good Knowledge and experience in Troubleshooting and Repairs of Bridge Equipment will be given preference.
• Candidate should be capable of doing independent Documentation, coordination with other staff member, weekly reporting.

• Assist to ensure all M&E construction activities meets the performance and procedures and making recommendations for improvements and correction actions.
• Manage contractors with a focus on quality, compliance with engineering drawings, applicable code and standards and project schedule and cost.
• Work closely with draftsmen and all sub-contractors to carry out design, supervision and installation of the entire electrical installation, including testing and commissioning of all systems.
• Provide supervision and input to site projects with regards to site logistics, installation, safety, sub-contractors, quality, cost control and on-time reporting.
• Assist Project Manager in developing and implementing corporate construction policies.
• Oversee the effective management of project activities to ensure timely delivery and low wastage.
• Liaise with internal department, government/Statutory Authorities, consultants, clients, suppliers to ensure smooth operation of projects.
• Assist in timely project progress reporting to Management and attending to all site meetings.
• Ensure business objective is obtained and complies with all relevant regulation and laws.
• Attending to all site meetings with owner, consultants and main contractors on all matters.
• Monitor the project progress and deliver project to the expected safety and quality objectives and ISO standards
• Assist in manpower allocation to maximise productivity.

Requirements

• At least a Diploma in Engineering majoring in Mechanical Engineering.
• Minimum 3 years of working experience.
• Those with potential will be groomed for a senior position.
• Those with M&E Construction Industry experience will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• computer literacy and proficient in Ms Office.
• Those with knowledge of AutoCad and Primevera software will be an added advantage.

• Assist to ensure all M&E construction activities meets the performance and procedures and making recommendations for improvements and correction actions.
• Manage contractors with a focus on quality, compliance with engineering drawings, applicable code and standards and project schedule and cost.
• Work closely with draftsmen and all sub-contractors to carry out design, supervision and installation of the entire electrical installation, including testing and commissioning of all systems.
• Provide supervision and input to site projects with regards to site logistics, installation, safety, sub-contractors, quality, cost control and on-time reporting.
• Assist Project Manager in developing and implementing corporate construction policies.
• Oversee the effective management of project activities to ensure timely delivery and low wastage.
• Liaise with internal department, government/Statutory Authorities, consultants, clients, suppliers to ensure smooth operation of projects.
• Assist in timely project progress reporting to Management and attending to all site meetings.
• Ensure business objective is obtained and complies with all relevant regulation and laws.
• Attending to all site meetings with owner, consultants and main contractors on all matters.
• Monitor the project progress and deliver project to the expected safety and quality objectives and ISO standards
• Assist in manpower allocation to maximise productivity.

Requirements

• At least a Diploma in Engineering majoring in Electrical Engineering.
• Minimum 3 years of working experience.
• Those with potential will be groomed for a senior position.
• Those with M&E Construction Industry experience will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad and Primevera software will be an added advantage.

Job Description

• Assist in preparation and submission of engineering design and documents by following construction plan and drawings
• Oversee construction activities, progress, planning and implementation according to project timeline.
• Monitor and adhere to work schedule, work progress and project costing
• make recommendation for effective project management
• Monitor materials delivery and usage
• Working together with the safety team to ensure overall site safety
• To assist the project engineer, general contractors and the rest of the team for the execution of contracts progress
• To coordinate with clients, consultants, subcontractors to ensure timely delivery of work schedule
• To assist Project Engineer on all other project administrative matters.
• Proficient in Rebar casting and Steel Structures
• Make sure projects meet authorities requirements.
• Prepare day to day report on work progress and update the management

Job Requirements:

• Possess at least Diploma / Degree in Civil, Electrical, Mechanical Engineering or equivalent
• Preferable with minimum 2 years of working experience in construction industry.
• Possess relevant safety certificates
• Ability to work independently and under pressure to meet tight project schedules.
• Willing to travel & based at the project site if necessary
• Able to work long hours, night works, overtime and Sunday work if required

About the Company

Our Client is a leader in geospatial technologies, serving customers across industries from commercial to government sectors.

Responsibilities

We’re looking for a highly engaged, solution-centric Software Engineer to deliver impactful geospatial solutions to achieve positive client outcomes.

• Understand and analyse customer’s challenges and requirements;
• Work with team members to identify solutions for complex problems faced by customers;
• Design and develop applications that leverage on geospatial technologies;
• Propose innovative designs that are empathetic and create a good user experience;
• Identify areas for professional growth, receive training and attain relevant certification;
• Participate in an agile team to continually improve the quality of solutions to customers.

Requirements

• Degree in Computer Science, Mathematics, Geographical Information Systems, or any relevant discipline;
• At least 3 years of experience full-stack application development, with strong front-end focus;
• Proficiency in JavaScript and its frameworks would be an advantage;
• Proficiency in Geographical Information Systems (GIS) technologies would be an advantage;
• Analytical and problem-solving skills;
• Creativity, innovation and a passion for designing user-centric and effective solutions;
• Excellent communication skills to articulate solutions for complex problems;
• Ability to work in a fast-paced environment with multiple deadlines.

Employment Details

• Career advancement opportunities;
• Good learning & development opportunities.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

• Knowledge of electrical engineering fundamentals and practices
• Ability to draft and design plans and schematics
• Technical project management skills and experience
• Excellent communication skills
• Ability to design and test electrical systems
• Knowledge of the latest trends and technologies
• Understanding and implementing designs from technical drawings
• Interacting with contractors and customers using verbal and written communication
• Making presentations to clients and coworkers
• Attending company meetings
• Creating product documentation and records
• Preparing cost estimates for customers and other employees
• Inspecting electrical components during and after the product installation
• Testing electronics for problems and proposing solutions

The service engineer's responsibilities include repairing faults, servicing equipment, creating preventative maintenance strategies, and updating user manuals

• Monitoring and maintaining electrical equipment or machinery performance;

• Walking customers through how equipment works including how to use it safely;

• Explaining new features and suggesting upgrades to customers;

• Delivering services to customers effectively and on time;

• Ordering and restocking materials when it is required;

• Participating in ongoing training to keep up to date with the latest developments in electrical engineering;

• Providing clear customer feedback;

• Leading or assisting with the support of projects;

• Following government health and safety regulations and the regulations of their employer.

Job Description:

The candidate should have good knowledge in typical design pattern in java, Console application and Control M. He should have extensive knowledge in java multiple thread programming. He should be a very good team player and should have courage to take the ownership of the end-to-end implementation. Must have change implementation process & also expected to have the DEVOPS & JIRA process.

About the Company

Our Client is a leader in geospatial technologies, serving customers across industries from commercial to government sectors.

Responsibilities

We’re looking for a highly engaged, solution-centric Software Engineer to deliver impactful geospatial solutions to achieve positive client outcomes.

• Understand and analyse customer’s challenges and requirements;
• Work with team members to identify solutions for complex problems faced by customers;
• Design and develop applications that leverage on geospatial technologies;
• Propose innovative designs that are empathetic and create a good user experience;
• Identify areas for professional growth, receive training and attain relevant certification;
• Participate in an agile team to continually improve the quality of solutions to customers.

Requirements

• Degree in Computer Science, Mathematics, Geographical Information Systems, or any relevant discipline;
• At least 3 years of experience full-stack application development, with strong front-end focus;
• Proficiency in JavaScript and its frameworks would be an advantage;
• Proficiency in Geographical Information Systems (GIS) technologies would be an advantage;
• Analytical and problem-solving skills;
• Creativity, innovation and a passion for designing user-centric and effective solutions;
• Excellent communication skills to articulate solutions for complex problems;
• Ability to work in a fast-paced environment with multiple deadlines.

Employment Details

• Career advancement opportunities;
• Good learning & development opportunities.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

• Assist to ensure all M&E construction activities meets the performance and procedures and making recommendations for improvements and correction actions.
• Manage contractors with a focus on quality, compliance with engineering drawings, applicable code and standards and project schedule and cost.
• Work closely with draftsmen and all sub-contractors to carry out design, supervision and installation of the entire mechanical installation, including testing and commissioning of all systems.
• Provide supervision and input to site projects with regards to site logistics, installation, safety, sub-contractors, quality, cost control and on-time reporting.
• Assist the Project Manager in developing and implementing corporate construction policies.
• Oversee the effective management of project activities to ensure timely delivery and low wastage.
• Liaise with internal department, government/Statutory Authorities, consultants, clients, suppliers to ensure smooth operation of projects.
• Assist in timely project progress reporting to Management and attending to all site meetings.
• Ensure business objective is obtained and complies with all relevant regulation and laws.
• Attending to all site meetings with owner, consultants and main contractors on all matters.
• Monitor the project progress and deliver project to the expected safety and quality objectives and ISO standards
• Manpower allocation to maximise productivity.

Requirements

• At least a Diploma in Engineering majoring in MEP or relevant field.
• Minimum 5 years of working experience.
• Those with potential will be groomed for a senior position.
• Those with Construction Industry (majoring in ACMV service) experience will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.

RESPONSIBILITIES:

• Manage site activities, vendors and sub-contractors
• Attend meeting, coordination, prepare works schedule & site supervision
• Supervise construction and civil works on site.
• Review project specifications, technical clarifications, and construction drawings
• Carry out works scheduling, material requisition, cost control, project supervision, and documentation
• Ensure timely and smooth progress of works
• Responsible for all aspects of site safety

REQUIREMENTS:

• Diploma/Degree in Civil Engineering
• Minimum 2 years related Project experience
• Good communication & interpersonal skills
• Excellent project skills
• Good team player and adaptable to a dynamic environment

• Ensure all M&E construction activities meets the performance and procedures and making recommendations for improvements and correction actions.
• Manage contractors with a focus on quality, compliance with engineering drawings, applicable code and standards and project schedule and cost.
• Work closely with draftsmen and all sub-contractors to carry out design, supervision and installation of the entire mechanical installation, including testing and commissioning of all systems.
• Provide supervision and input to site projects with regards to site logistics, installation, safety, sub-contractors, quality, cost control and on-time reporting.
• Assist the Project Manager in developing and implementing corporate construction policies.
• Oversee the effective management of project activities to ensure timely delivery and low wastage.
• Liaise with internal department, government/Statutory Authorities, consultants, clients, suppliers to ensure smooth operation of projects.
• Assist in timely project progress reporting to Management and attending to all site meetings.
• Ensure business objective is obtained and complies with all relevant regulation and laws.
• Attending to all site meetings with owner, consultants and main contractors on all matters.
• Monitor the project progress and deliver project to the expected safety and quality objectives and ISO standards
• Manpower allocation to maximise productivity.

Requirements

• At least a Diploma in Engineering majoring in MEP or relevant field.
• Minimum 7 years of working experience.
• Those with potential will be groomed for a senior position.
• Those with Construction Industry (majoring in ACMV service) experience will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.

Job Description

Technically competent in Oracle EBS Core HR, Self Service HR, Absence Management, Approval Management Engine, Talent Management and Compensation Modules

Technically competent in Unix/Linux, Oracle PL/SQL, WebLogic, Java J2EE, Oracle SSO Roles/Responsibilities

Responsible to provide BAU support for responsible for ensuring system availability and provide support for applications like Core HR, Self Service HR, Leave Management, Talent Management, Compensation Modules and other ERP financial modules.

Responsible to provide operational support and ensure SLI of system availability, online and batch deliverables.

Fine tune applications and systems for high performance and higher volume throughput

Contribute to business requirement review for technical implementation as a subject matter expert for IT to ensure SDLC standards are met.

Conduct review of technical and functional solutions from enhancement/project team to ensure they conform to IT standards.

Respond on time to the queries raised by various business units. Confidential S/N Role Team/ Competency Core Skillsets High Level Job Scope Job Description

Provide timely updates regarding production status and progress of issue resolution.

Perform impact analysis of enhancements/projects that will impact supported systems.

Participate in Disaster Recovery and Business Continuity exercises.

Provide on-call support and afterhours/weekend support as needed, covering application support and application change deployment.

Have a quality mind-set with prevention attitude to attain zero defects

Able to support SIT/UAT/PROD/DR deployment, with DevOps

Able to support relevant software/platform/database upgrade for the systems.

Job Description

Identifying technological and operational gaps in the monitoring, diagnostics, and management infrastructure and implementing solutions to meet requirements

Enhancing capabilities to analyze device syslog data to identify issues proactively or reactively

Deepening network telemetry analysis by enabling new real-time data from network devices

Broadening our packet and flow monitoring fabric and aggregating this data for new focused diagnostic and trouble-shooting capabilities

Identifying common, repeatable provisioning, troubleshooting and network recovery tasks, and building automation to manage these tasks

Developing self-service tools for application and infrastructure clients to gain better visibility of real-time network health and performance

Partnering with network, systems, and application teams to drive the build and delivery of next generation network tools and capabilities

Implementing software, systems, and solutions identified by the Network Tools team leads

Qualifications:

Minimum of 1 year of relevant work experience or a Bachelor's Degree

Solid understanding and ability to optimize the platforms and technology used in monitoring networks, including but not limited to SNMP, syslog, and probing

Experience implementing engineering solutions for network monitoring and alarming tools, leveraging vendors such as Netcool, Solarwinds, Netscout, Netbrain, and Thousandeyes

Understanding of LAN and WAN network technologies, routing and switching design

Understanding of technologies like LTM, GTM, CDN used to deliver online services

Understanding of security services like Firewall, DDoS mitigation, WAF, Botnet prevention.

Experience partnering with diverse technical teams and implementing solutions to deliver customer requirements

Experience implementing and operating fault management solutions to increase operational uptime

Proficiency with programming languages such as Python, Java, etc.

Excellent communicator and an excellent team player, capable of establishing trust and securing partnership with all levels of the organization

Proficiency in Linux, Windows, and other operating systems

Strong analytical skills with excellent problem solving ability

Good Knowledge on software development methodologies

Good Understanding of API frameworks like Rest and SOAP

Knowledge with CI/CD tools such as Jenkins, Artifactory and GIT

Knowledge of IT Systems management processes such as ITSM and ITIL

Understanding of DDI implementations (DNS, DHCP, IPAM).

Job Description:

The support specialist will be a techno functional support team member for the Enterprise Datawarehouse (EDW) under IT BAU team.

He/she is responsible for ensuring system availability and timely deliverables for datamarts for various business unit like Finance, regulatory, Campaign.

The support specialist, as the analyst expert within the IT team, will be the support staff who needs to closely co-ordinate and work with various team like Tech Infra, application services, solutioning, project and business units in the bank. He/she follows up to resolve issues

Requirements:

Responsible to provide BAU support for Enterprise Datawarehouse

Responsible to provide operational support and ensure SLI of system availability, batch deliverables

Respond on time to the queries raised by various business units

Provide timely updates regarding production status and progress of issue resolution

Fine tune applications and systems for high performance and higher volume throughput

Conduct review of technical and functional solutions from enhancement/project team to ensure they conform to IT standards

Perform impact analysis of enhancements/projects that will impact supported systems

Identify the underlying problems, analyse the root causes, provide possible solutions/fixes, and respond to users within SLA

Support relevant software/platform/database upgrade for the systems

Work with delivery team for smooth transition from projects/enhancements to BAU Mode

Incident, problem, and service outage management experience

Participate in Disaster Recovery and Business Continuity exercises

Able to support relevant software/platform/database upgrade for the systems

Server Performance, capacity, utilization monitoring and Health monitoring

Collaborate with diverse cross functional teams within IT and Business to Independently drive outcomes

At least 3+ years of relevant experience in banking/financial services industry

Experience with Teradata FSLDM and data mapping

Hands-on technologist, strong in SQL, UNIX and Teradata tools and technologies

Experience in designing high throughput fault tolerant data pipelines for Batch (ETL/ELT)

Experience in GL Data reconciliation between systems, datamarts & report and Knowledge of the ledger balance reporting is an added advantage

Experience in Performance Tuning on Teradata or other MPP data pipeline.

Responsibilities:

• Oversee construction activities and progress, planning, implementing and monitoring work schedules in accordance with master work schedules and established budgets and ensuring delivery of quality work that meets contractual requirements
• Oversee quality control on site and together with the safety team, ensure Environmental, Health and Safety practices are carried out effectively by all parties (internal & external) working on site
• Manage and control workers on site and monitor their work closely to ensure quality standards and keep site safe and neat
• Understand and interpret drawings and specifications, and check plans, drawings and quantities for accuracy of calculations
• Manage, monitor and interpret the contract design documents supplied by the client or architect
• Ensure that all materials used and work performed are in accordance with the specifications and established budgets
• Liaise with all internal and external parties involved in the project
• Liaise with consultants on technical issues, and handle and resolve any technical and engineering problems that may arise
• Provide guidance to supervisors relating to construction works, ensure progress according to schedule, quality standards are maintained, site inspections are carried out and technical and other site issues are resolved on time
• Supervise, manage and coordinate with sub-contractors to ensure quality of work and scope of work is within specifications and established budgets
• Plan and organise site work efficiently e.g. manpower allocation, plant and site facilities to meet agreed deadlines
• Manage and coordinate with purchasing department and various suppliers for timely purchase of materials & supplies (e.g. rebar, formwork, concrete, scaffolds, sanitary fittings) to site, delivery checking and verification to execute contract works and ensure no delays or gaps in schedule
• Inspect sites to monitor job progress and assess and ensure conformance to engineering plans, specifications and construction standards

Requirements:

• Bachlor Degree or Diploma in Civil/ Structural Engineering or any related fields
• Minimum 3 years’ relevant experience in Construction or Site Management
• Independent, meticulous in work, good leadership, manpower & resources allocation skills, team player, with ability to plan work efficiently in advance and build rapport with all levels of stakeholders
• Ability to speak and write well in English

Responsibilities:

• Oversee construction activities and progress, planning, implementing and monitoring work schedules in accordance with master work schedules and established budgets and ensuring delivery of quality work that meets contractual requirements
• Oversee quality control on site and together with the safety team, ensure Environmental, Health and Safety practices are carried out effectively by all parties (internal & external) working on site
• Manage and control workers on site and monitor their work closely to ensure quality standards and keep site safe and neat
• Understand and interpret drawings and specifications, and check plans, drawings and quantities for accuracy of calculations
• Manage, monitor and
• Interpret the contract design documents supplied by the client or architect
• Ensure that all materials used and work performed are in accordance with the specifications and established budgets
• Liaise with all internal and external parties involved in the project
• Liaise with consultants on technical issues, and handle and resolve any technical and engineering problems that may arise
• Provide guidance to supervisors relating to construction works, ensure progress according to schedule, quality standards are maintained, site inspections are carried out and technical and other site issues are resolved on time
• Supervise, manage and coordinate with sub-contractors to ensure quality of work and scope of work is within specifications and established budgets
• Plan and organise site work efficiently e.g. manpower allocation, plant and site facilities to meet agreed deadlines
• Manage and coordinate with purchasing department and various suppliers for timely purchase of materials & supplies (e.g. rebar, formwork, concrete, scaffolds, sanitary fittings) to site, delivery checking and verification to execute contract works and ensure no delays or gaps in schedule
• Inspect sites to monitor job progress and assess and ensure conformance to engineering plans, specifications and construction standards

Requirements:

• Diploma or Degree in Civil/ Structural Engineering or any related fields
• Minimum 3 years’ relevant experience in Construction or Site Management
• Independent, meticulous in work, good leadership, manpower & resources allocation, and problem solving skills, team player, with ability to plan work efficiently in advance and build rapport with all levels of stakeholders
• Ability to speak and write well in English

Our commercial architectural firm requires an experienced, highly technical Civil Engineer to join our team of design professionals. We’re a progressive, tight-knit company with significant expansion plans. We offer several opportunities for promotion if you meet our needs, especially if you have experience with concrete restoration. Our portfolio includes numerous high-profile clients, so if you are looking to expand your repertoire and improve your resume, this position is the perfect fit for you. Our firm primarily manages commercial projects in the industrial sector, so experience or knowledge of that area is a plus. The successful candidate will also be responsible for overseeing the engineering department.

About the Company

Our Client is a leader in geospatial technologies, serving customers across industries from commercial to government sectors.

Responsibilities

We’re looking for a highly engaged, solution-centric Software Engineer to deliver impactful geospatial solutions to achieve positive client outcomes.

• Understand and analyse customer’s challenges and requirements;
• Work with team members to identify solutions for complex problems faced by customers;
• Design and develop applications that leverage on geospatial technologies;
• Propose innovative designs that are empathetic and create a good user experience;
• Identify areas for professional growth, receive training and attain relevant certification;
• Participate in an agile team to continually improve the quality of solutions to customers.

Requirements

• Degree in Computer Science, Mathematics, Geographical Information Systems, or any relevant discipline;
• At least 3 years of experience full-stack application development, with strong front-end focus;
• Proficiency in JavaScript and its frameworks would be an advantage;
• Proficiency in Geographical Information Systems (GIS) technologies would be an advantage;
• Analytical and problem-solving skills;
• Creativity, innovation and a passion for designing user-centric and effective solutions;
• Excellent communication skills to articulate solutions for complex problems;
• Ability to work in a fast-paced environment with multiple deadlines.

Employment Details

• Career advancement opportunities;
• Good learning & development opportunities.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

• Report and assist Project Manager on project functions.
• Assist in project planning implementation and to coordinate all construction works on the project site.
• Prepare, plan and submit project-related documents.
• Supervise the execution of the construction works and ensure that the works are carried out.
• Assist contract department in verifying progress payments and claims from Contractors.
• Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Trained in risk management.
• Candidate must possess a Bachelor's Degree in Engineering (Civil) or equivalent.
• At least 3 year(s) of relevant working experience in the construction industry.
• Good problem solving and strong communication skills.
• High proficiency in MS Office.

Job Description:

-- Good knowledge and experience in Hadoop

-- Hands-on Experience within the Hadoop Tool Sets Hive, Hue, Spark, Kafka, Kudu, Flink, Ozone, Kafka, and Streaming.

-- Strong SQL, Python, Java, and Unix shell scripting, and with good experience in application support especially in the banking/financial services industry

Overview:

The Wintel Engineer will be responsible for maintaining, troubleshooting, and supporting the Windows server infrastructure for the organization.

Responsibilities:

Install, configure, and manage Windows server operating systems and related software applications.

Monitor server performance and ensure system availability and reliability.

Troubleshoot and resolve system issues and outages in a timely manner.

Perform routine system maintenance tasks, such as patching, updating, and upgrading servers.

Ensure security compliance and implement security best practices on Windows servers.

Document system configurations, processes, and procedures for knowledge sharing and training.

Participate in on-call support rotation and respond to system emergencies as needed.

Qualifications:

3+ years of experience working with Windows server environments.

Proficiency in Windows server operating systems, Active Directory, DNS, DHCP, and Group Policy.

Strong troubleshooting and problem-solving skills.

Excellent communication and interpersonal skills.

Relevant certifications such as MCSE, MCSA are a plus.

Deliverables:

Completed installations and configurations of Windows servers and related software.

Documentation of system configurations, procedures, and troubleshooting steps.

Timely resolution of system issues and outages to ensure system availability and reliability.

EA License No. - 14C6941

Role: Senior Data Engineer

Job level: More than 10 years of relevant experience (L4)

Key skills:

AS400, Hadoop, Data Lake, SQL, Informatica

Key Responsibilities:

· Design, develop, and implement data processing pipelines to process large volumes of structured and unstructured data

· Should have good knowledge and working experience in Database and Hadoop (Hive, Impala, Kudu).

· Should have good knowledge and working experience in scripting using (Shell script, awk programming, quick automation to integrating any third-party tools), BMC monitoring tools

· Good understanding and knowledge in Data Modelling area using industry standard data model like (FSLDM)

· Collaborate with data engineers, data scientists, and other stakeholders to understand requirements and translate them into technical specifications and solutions

· It will be good to have experience in working with No SQL as well as virtualized Database Environment

· Implement data transformations, aggregations, and computations using Spark RDDs, Data Frames, and Datasets, and integrate them with Elasticsearch

· Develop and maintain scalable and fault-tolerant Spark applications, adhering to industry best practices and coding standards

· Troubleshoot and resolve issues related to data processing, performance, and data quality in the Spark-Elasticsearch integration

· Monitor and analyze job performance metrics, identify bottlenecks, and propose optimizations in both Spark and Elasticsearch components

· Prior experience in developing banking application using ETL, Hadoop is mandatory. In depth knowledge of technology stack at global banks is mandatory.

· Flexibility to stretch and take challenges

· Communication & Interpersonal skills

· Attitude to learn and execute

Key Requirements:

• 7+ years of AS400, RPG, CLP & SQL

• Knowledge of Aldon Change Management System(ACMS) is a must·

• Experience in developing Hadoop

• Experience in data lake (integration of different data sources into the data lake)

• SQL Stored Procedures/Queries/Functions

• Unix Scripting

• Experience with distributed computing, parallel processing, and working with large datasets

• Familiarity with big data technologies such as Hadoop, Hive, and HDFS

• Job Scheduling in Control-M

• Strong problem-solving and analytical skills with the ability to debug and resolve complex issues

• Familiarity with version control systems (e.g., Git) and collaborative development workflows

• Excellent communication and teamwork skills with the ability to work effectively in cross-functional teams.

Responsibilities

• Responsible for day-to-day operational activities to ensure optimum system performance and determine the system strategy for business continuity.
• Responsible for daily system health checks and proactive incident reporting.
• Support new operation initiatives and to drive development of system integration, acceptance, performance management practice and performance testing.
• Work with different stakeholders to perform technical support for any TRUST incident or request.
• Support infrastructure services either on premise, hybrid, or public cloud environment to support systems by working closely with different stakeholders.
• Responsible for ensuring backup solution for data and system are operational state
• Support for any application/platform and security incidents, work with various internal teams and vendors to resolve issues on a timely basis to meet SLA.
• Responsible for tracking and maintaining asset inventory to ensure all asset are accounted for.
• Ensure that Standard Operation Processes (SOPs) are properly documented and complies with audit requirements.

Requirements / Qualifications

• Degree in Computer Science/Engineering, Information Technology, or in relevant disciplines.
• Added advantage with AWS Certification - working experience in Cloud-based services, IT operations and vendor management.
• Proactive and dedicated individual with multi-tasking capabilities
• Working knowledge of and experienced in Public Agency IT/System environment is preferred.
• Familiar with cloud-based services such as Government Commercial Cloud (GCC), AWS and/or Azure.
• Familiarity with security and access control measures to control privileged access to test and production environment.
• Experience in networking technologies such as WAN, LAN, Network Security, Firewall rules, Load Balancers, VPNs and DNS,Knowledge of disaster recovery, system backup and restore.
• Certification in AWS SysOps is a plus.