The Senior Network Operations Engineer is an Operations role whom will focus on SLA driven Level 3 Incident Management which encompasses responding and resolution of Network, Wireless, Security Infra related issues. The position will be a critical member of the Operations team whom are the higher level and Sev 1 n 2 escalations to diagnose and troubleshoot fault incidents. This role will work directly with customers to gather the fault symptoms and provide the resolution or work around and share best practices, make recommendations, document the issues, provide root cause incident reports. The job scope includes extensive support to client network support team to perform activities in network health check, wireless testing, user issues, break fix, preparing Incident root cause reports.

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Field engineer responsible for handling support issues on Enterprise Networking Platforms and Solutions related to Routing, Switching, Wireless, NAC, Security. Includes Vendors such as Cisco / Aruba / Fortinet / Riverbed / Palo Alto / F5 etc
• Under take escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 3 on site troubleshooting and hardware field replacement works for Enterprise Networking Solutions.
• Be part of a team of engineers that performs 24 hours standby duties on a rotational basis.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you
• Work closely with various team of engineers for troubleshooting in relation to Enterprise Networking incidents.

Qualifications:

• Minimum 5 years of relevant experiences in network operations including network, wireless, security technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA/CCNP/CCIE certified plus any other networking certifications preferred
• Strong understanding about Enterprise Networking Solutions such as VSS,
• VPC, Multicast , MPLS etc..
• Ability in performing local / remote IOS upgrades on different products and RMAs for faulty devices in production

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Ownership on critical incidents for customers to deliver resolution with in SLA.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up-to-date software.
• Troubleshoot production issues and network/security problems to fix any infra related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Performing RMA for hardware failures and replacement in production environment
• Perform health checks for the critical environments and ensure the systems running up to the standard and no potential failures.
• Setup staging and simulation for customer activities for critical jobs before actual tasks in production environment.
• Working in 24/7 operations centre and standby role for after office hours support on monthly rotational basis
• Able to follow and meet customer SLA for all the incidents and requests / responsible for the service delivery
• Undertake escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 1/2/3 on site troubleshooting and hardware field replacement works for customers.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you

The Individual and their Experience:

• Knowledge of ITIL principles, particularly Incident, Change, Problem and Service Management
• Minimum 2-3 years of relevant experiences in network operations including network, wireless, security technologies.
• Experienced on working with vendors and customer on outage situation and provide direction to juniors and customer on recovering services affectively.
• Hands on experience in operations and BAU for fixing user/infra issues in production environment is essential.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Description & Requirements

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

4. Prepare operational and maintenance schedule as per MIS

5. Work closely and collaborate with the customer support team to ensure customer satisfaction.

6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

7. Remote monitoring of the system operation and performance and reach site if any emergency.

8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

9. Working with a team and deliver the work within the planned schedule.

10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

2. Electrical or Mechanical troubleshooting experience would be advantageous

3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

4. Strong communication and analytical skills.

JOB DESCRIPTION:

- Pressure vessel and tank design in accordance with ASME Boiler & Pressure vessel Code section II, VIII (Div.1 & 2) and IX, API 650 TEMA, JIS B8265 and JPI.

- Take the vendor’s technical quotation review, clarification and evaluation, leading the kick-off meeting/design review meeting, supporting the pre-inspection meeting, coordinating with other disciplines (Project, Process, Civil, Piping, Electric, Instrument, Transportation, Construction, etc.).

- Prepare Requisition including basic technical requirements, detail design requirements, general documentation requirements, inspection and procedure requirements, etc.

- Evaluate performance of vendor’s design equipment such like plate heat exchangers, filters, drum, etc.

- Review vendor package design including 3D model (Navis Works) and follow up on the required approvals.

- Review / approve vendor documents in line with client / contractor’s requirements.

- Follow up of all engineering issues and close any outstanding issues as promptly as possible.

- Monitor and control vendor’s document submission status. Expedite vendor if any delay.

- Coordination with vendors and global project disciplines for the proper execution of the project.

- Attend project meeting / follow up meeting with vendors, client, third party etc.

- Review thermal rating result of shell & tube heat exchangers in performance point of view.

- Discuss technical issue in design review meeting with vendor to close comments of vendor documents for equipment including package items.

- Assist site team during construction and commissioning stage

- Conduct trouble shooting, investigate root cause, propose countermeasure.

- Assist procurement team as required during the ordering stage.

- Vendor qualification work including check of Design/QAQC/Fabrication capability, vendor’s experience, fabrication sequence & typical schedule, work load, etc.

JOB REQUIREMENTS

- Master’s Degree in Mechanical Engineering.

- More than 5 years of experience as Design Engineer in Pressure Vessel Engineering field in Chemical Plant

- Work experiences at Chemical Plant site in Singapore as field engineer for 6 months and worked for pre-commissioning/progress monitoring for Static equipment and equipment preservation. Communication with vendor supervisor.

- Inspection experience of Static Equipment (Carbon Steel Drum, Stainless Steel Drum and FRP Tank etc.) at vendor’s shop.

- Contribution as a lead engineer for static equipment design for any types of projects such as feasibility study, FEED, EPC and proposal work also.

- Communication with global office engineers.

- Strong engineering knowledge in static equipment for high pressure/temperature, various materials types (carbon steel, stainless steel, duplex stainless steel, etc.), various material constructions (clad/weld overlay/lining/mono-wall/multi-wall), welding including tube-to-tube sheet and dissimilar welding.

- Familiar and aware of collaboration between inter-discipline engineering activities.

- Attendance of 2-weeks Welding Training at Hitachi Zosen Corporation in Kumamoto, Japan, experience of actual welding work (SMAW, SAW, FCAW, TIG) and non-destructive examination for weld joint (PT, MT, UT, RT).

- Speaks and write proficent English and Japanese

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The job holder is to work with PI and the research team to conduct Research Characterizing Airborne Pollutants in Urban Environment.

The research activities involve (but not limited to):

• Operating a wide variety of instruments, data retrieval
• Laboratory chemical analyses and speciation
• Modeling chemical reactions of airborne pollutants
• Assisting and contributing to project deliverables, including,
• Planning and conduct experiments, data analyses, progress reporting, report writing, etc.

Qualifications

One or more of (but not limited to) the following:

• Fast learner capable of conducting independent research and proficient literature search, review & summary with strong background in chemical engineering / chemistry / physics
• Sufficient experiences in applying Pythons functions of matplotlib, and numPy, pandas, statsmodels, etc
• Modeling chemical reactions of airborne pollutants through implicit modules
• Experiences of applying machine learning to handle big data
• Experiences of laboratory chemical analyses using chromatography, such as GC-MS-MS, LC-MS-MS, etc
• Experiences of operating instruments measuring physical properties of aerosols
• Experiences in conducting field studies of aerosol and VOC sampling using various instruments
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc
• Proven rounded and effective team player with strong initiative and ownership of the research project

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to manage the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.

• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.

• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.

• Contribute necessary improvements and offer advice about operational procedures.

• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications

• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.

• Work with the Service Department to resolve enquiries, if required.

• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.

• Able to travel in short notice.

• Good verbal communication skill.

• Physically capable and available to work overtime including weekends and public holidays.

• Ensure a safe working environment.

• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.

• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).

• Desirable overtime allowance after probation period.

Interested applicants can also send your resume/ cv to ‘[email protected]’.

Role Purpose:

In this role, the Senior Value Stream + Smart Tool Engineer will support new product introduction function under Industrial Engineering SEA organization. As a key stakeholder in product engineering process (PEP) and Product Transfer Process (PTP), the IE focuses on industrialization of new products through realization of production concept, process & test developments, in a complete production line to mass release.

Major Accountabilities:

1. Involve in new product launch from the early conceptual stage, ensure that product is designed according to Design for Manufacturing
2. Define and develop value stream, manufacturing flows & routings of new products
3. Evaluate & determine line capacity and take time required based on forecast demand
4. Design production line and production layout, develop and setup physical line as planned
5. Actively look for opportunity to integrate new manufacturing process and automation concept into production line
6. Design production workstations, Jigs and Fixtures according to P+F Standard Workspace Modules
7. Implementation of lean concepts & management tools in production line
8. Equipment/jigs/fixtures requirements definitions in product launch and ensure availability in production line on time
9. Create production documentations & control plan and ensure availability in production before pilot run
10. Participate & contribute in DFMEA / PFMEA
11. Ensure on-time process and manufacturing release, in-line with P+F Time-to-Market initiative
12. Work with project & production team to achieve target yield as committed in project plan
13. Able to work in cross-functional team environment, with close communications with process/test engineering of IE and M+S team, production and R&D
14. Responsible to lead/participate in improvement projects which yields to significant improvements in quality, cost and technology, and ensure project complete on time and project targets met
15. Establish and maintain guidelines, procedures and standards for Automation Projects and Fixture Engineering activities
16. Direct, review and approve technical documents, ie. Equipment requirements specifications, fixture engineering designs and all relevant hardware qualification documents
17. Identify and initiate opportunities for manufacturing productivity improvement through Automation and Fixturing designs, in close alignment with Industrial Engineering Division and respective total production unit (TPU) operational needs
18. Responsible for Fixture development and Qualification for New, Transfer and Improvement Projects
19. Provide 3D Printing services for Prototyping requirements at agreed cost, quality and lead time

Role Requirements:

• Bachelor/Master degree in Electronics, Mechanical or Industrial Engineering
• Min 7 years of working experience in related field or industry, with proven record in new product introduction, product transfers, production line setup
• Knowledge in plastic part joining technology, e.g. ultrasonic/laser welding; automation technology; jigs/fixtures mechanical concept & design
• Knowledge of industrial sensors products would be advantageous
• Knowledge of Kaizen
• Green Belt or equivalent ( Lean Six Sigma)
• Master of tools and method. ie DMAIC, SIPOC, SMED

Have we piqued your interest?

Then we would like to meet you. Please send your application online and we look forward to your application!

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience
• New entry is welcomed

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Job summary:

We are currently looking for a Cyber Security Engineer to join our Professional Services Team delivering Security Projects encompassing predominantly NAC, Firewall, PS and 2FA solutions.

Qualified candidate is expected to have hands-on experience in delivering such solutions. This role presents itself with considerable learning opportunities on the state-of-the art security technologies. And based out of our Singapore office, this role would be reporting to the Technical Manager (Cyber Security).

1.0 Job Responsibilities:

· Develop low level design document for the project delivery detailing the scope with the sensible technology write up.

· Participate in Internal/Customer meetings to develop the LLD document

· Strong understanding with hands-on experience of multiple NAC solutions using Radius Protocol and device admin with Tacacs Protocol

· Understanding of Windows Active Directory and Integration with NAC Solutions

· Proficient with hands-on experience delivering Firewall migrations and tuning Firewall/IPS policies.

· Ability to deliver 2FA Solutions for specific use case requirements

· Proactively participate in maintaining internal knowledgebase sharing technical findings within the Team

2.0 Required Qualifications:

Essential:

· Network Access Control (dot1x) experience of HPE ClearPass, Cisco ISE

· Firewall Migration expertise across multi-vendor platforms- Cisco ASA/FTD, Palo Alto, Fortigate, Checkpoint

· Hands on experience Cisco FirePower NGIPS

· Basic understanding of Networking – Routing and Switching Protocols

· Ability to manage small scale project and ensure completion within the projected timeline

· Build Customer relationship to manage the projects in a congenial way

· Team Player highly spirited, sharing project experience with peers

· Able to learn and adopt new skills when projects warrant based on the relevant training provided

Desirable:

· Hands on experience RSA SecureID, Cisco DUO 2FA

· Hands on experience deploying in Cloud platform (i.e. AWS, Azure) is preferred

· Knowledge of CyberArk, WAF and Database Firewall is preferred

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

JOB DESCRIPTION:

• Control FPSO TOPSIDE engineering work including Detail Engineering Subcontractors, EPC package supplier, and supplier documents.
• Prepare and keep detail Engineering Procurement Construction Integration (EPCI) schedule for topside in FPSO project.
• Overall responsibility for all project activities under assigned scope management of discipline in engineering, procurement and construction Integration.
• Coordinate and follow up with design disciplines with emphasis on flow of inputs between design disciplines and highlight critical problems to head of disciplines and engineering managers.
• Review project/technical specifications for FPSO topside engineering.
• Manage detail engineering subcontractor’s quality and schedule during FPSO topside detail engineering stage.
• Support to establishing project control systems for the project schedule and cost. This includes development of the project baselines.
• Assist Project Manager and Project Control Manager to prepare the job execution plan in the parts related with engineering schedule, budget and resource planning.
• Set-up and maintenance of control work includes - scope monitoring (scope of works and supply in the Contract and those in the agreements among Joint Venture/Consortium, Sub-contractors), change order management, Overall Schedule Management, Risk Management (Risk identifications, monitoring and mitigation), Project Reporting.
• Set-up and maintenance of Letter Management System and Electronic Document Management System includes – establishing information exchange flow and document exchange flow among Joint Venture/Consortium, Vendor and Sub-contractor.
• Hold, manage and attend regular (weekly, monthly, progress) and key meetings within Project and with other engineering design disciplines to understand design issues and work out satisfactory solutions.
• Develop and coordinate the reporting system and reflect to the project.

JOB REQUIREMENT:

• Bachelor’s degree in department of Chemical Engineering.
• Minimum 6 years of working experiences in project management department for engineering company.
• At least a 1 year of working experiences in FPSO related project.
• At least 2 years of working experience as Project engineer in design office and construction site for Power Plant Project.
• Willing to travel and/or station in module fabrication yard, structure pre-fabrication shop, detail engineering subcontractor’s office as project engineer.
• Familiar and aware of collaboration between inter-discipline engineering activities with proactive mind.
• Familiar with scheduling software such as MS Project.
• Must be familiar with Electronic Document Management System such as TeamBinder.
• Familiar with material control system such as SPMat.

Job Description / Responsibilities

The candidate will be a member of the Integration Services Systems Infrastructure team that manages Server infrastructure and System Management systems.

His/her responsibilities include the following:

• System Management, Administration, Compliance and Support
• Proactively manage and maintain Systems and services to maintain a 24x7x365 uptime in accordance with SLA.
• Develop and implement project plans, risk assessments and contingency plans.
• Maintain best practices on managing systems and services across all environments in accordance with compliance policies.
• Fault diagnosis, analysis and of logging information for reporting of performance exceptions
• Proactively monitor system performance.
• Review or propose remediation solutions to address vulnerabilities identified and ensure the solutions are implemented in accordance with organizational policies.
• Collaborate with other teams and team members to develop ways to improve the stability, security, efficiency, and scalability of the environment
• Manage, coordinate, and implement software upgrades, patches, hot fixes on infrastructure managed.
• Provide after-hours support for Infrastructure related emergencies as well occasional weekend maintenance as part of the rotational duty support team.
• Maintain proper documentation according to organizational policies and practices.
• Maintain inventory and asset configuration documentation
• Support audit and compliance activities.
• Generate periodic reports according to organization practices.
• Perform change and release management activities according to organization practices.
• Coordinate / Perform Level 1,2 and 3 support and service provisioning requests.
• Liaise with vendors, internal stakeholders and/or customers to identify troubleshoot, and resolve issues.
• Support other IT related activities when required.

(a) Education Qualification

• Degree in Computer Engineering, Computer Science or IT related discipline
• Relevant IT certifications such as MCSE, RHCE, or similar are preferred

(a) Relevant Experience

· Possess relevant Server Administration experience on both Windows and Linux operating systems

· Possess Strong knowledge of IT systems and networking software, hardware, and networking protocols

· Possess experience in scripting (e.g., Linux Bash shell, Windows PowerShell)

· Possess experience in project management and able to provide good support to Project Managers

· Experience with the following technologies will be advantage:

1. Virtualization technologies - VMware ESXi, Nutanix AHV

2. Hyperconverged Infrastructure – Dell VxRAIL and Nutanix

3. iPaaS platform – Boomi iPaaS

4. ITOM/ITSM - ServiceNow

5. Splunk

6. System Monitoring – SolarWinds Server Application Monitoring (SAM)

Responsibilities

• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Lead the internal team members in achieving the ISO9001:2015 accredited certification as well as customer-specific qualifications.
• Work closely with internal team members and external suppliers to address product-related quality issues, and drive corrective and preventive actions for continuous improvement.
• Perform other duties as requested by management

Requirements

• Degree / Diploma in Engineering (Electrical Engineering, Mechanical Engineering, etc)
• Working knowledge in 5S, PFMECA, SPC & ISO 9000 series Quality system
• Able to communicate effectively across all levels
• Strong knowledge and ability to read mechanical drawings with knowledge of CMM, profile projector, and measuring equipments
• Min. 5 year's relevant working experience in the Manufacturing/EMS/Semiconductor industry or experience in quality environment

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

Roles and Responsibilities:

The Technical Support Engineering II is responsible for supporting Field Service Engineers and Customers through the different communication channels adopted.

Strive to resolve difficult problems relating to product deficiencies or user errors within the shortest time.

This role is tasked with maintaining product knowledge within the Tech Support group to manage escalated technical support requests.

The person in this position may also conduct training on products.

• General expert on several Alcon products.
• Generate Knowledge Articles based on the review of trends on service requests.
• Monitor and respond to GTS Now (service hotline and email/ticket support) service requests for the products he/she is trained on.
• Participate in training classes as assisting trainer or trainer in development
• Support in planning, coordinating and defining the content of product-specific training in coordination with all training locations.
• Collaborate with the Training Team when creating or reviewing training content
• Requires occasional travel, 20%

Education:

• Bachelor’s Degree or equivalent years of directly related experience

Experience (Years):

• Minimum 3 Years of Relevant Experience in Ophthalmology / Medical Device Industry in Technical Services roles.
• Experience in installing, maintaining, and repairing medical device equipment.
• Excellent problem-solving skills and ability to analyze complex technical issues.
• Strong communication skills, both verbal and written, with the ability to convey technical information clearly and concisely.
• Detail-oriented with a commitment to delivering high-quality results.
• Ability to work effectively in a fast-paced, dynamic environment.

Preferred Experience:

• Bachelor's degree in engineering or a related field. A focus on biomedical engineering or medical device technology is preferred.
• Experience troubleshooting and resolving complex issues on medical devices.
• Experience in technical service training to Field Service Engineers.
• Electrical/Electronic, Mechanical, and Optical Systems level training.
• Experience with networked products and installing medical devices in networked environments.

How You Can Thrive at Alcon:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

Alcon Careers

See your impact at alcon.com/careers

Job Description / Responsibilities

• Assist in Global Portnet Application Development and Support.
• Responsible for developing web applications based on microservice architecture.
• Responsible for developing both frontend UI and server side Services.
• Full stack developer experience is preferred.
• Adhering to functional and non-functional requirements.
• Conducting comprehensive systems testing to ensure bug-free programs.
• Code development to transform requirements to product features.

(a) Education Qualification

Degree in Computer Engineering, Computer Science or IT related discipline

(a) Personal Characteristics & Behaviours

• Java and Angular will be key skill
• Comfortable with technical troubleshooting in fast paced environment and has strong work ethics.
• Good problem-solving skills
• Good English, written and verbal communications skills
• Able to work independently, with initiative and minimal guidance / supervision
• Innovative and resourceful
• Result driven
• Good technical acumen
• Able to start work earliest possible

Objectives of this role

• Supervising and managing construction projects from start to finish, ensuring adherence to project plans and specifications.
• Reporting project updates, milestones and potential risks to the project manager and key stakeholders.
• Analysing and interpreting engineering drawings, survey reports and other technical documentation to guide the construction process.
• Planning and overseeing allocating resources, materials and equipment to optimise project efficiency.
• Monitoring project costs, identifying cost-saving opportunities and adhering to budget constraints.
• Providing technical guidance and expertise to resolve construction-related challenges.

Project Overview

SMART CAMP (Critical Analytics for Manufacturing Personalized-Medicine) is a interdisciplinary research programme in Singapore (CREATE international research campus and innovation hub) and at the Massachusetts Institute of Technology (MIT). SMART CAMP addresses key technology bottlenecks in cell therapy manufacturing: (i) critical quality attributes of safe, effective cell therapy products; and (ii) integrated process analytics to monitor and modulate those attributes. While cell therapies are poised to transform healthcare for both the industry and the patient, there remain many outstanding scientific and technical challenges to significant global impact that this R&D programme addresses. This high-impact focus includes measurement and feedback control of processing parameters (process analytic technologies, or PAT) that contribute to cell viability and function during cell proliferation, and the measurement at intermediate and final steps of the cell product properties correlated with positive therapeutic outcomes (critical quality attributes, or CQA).

This interdisciplinary team comprises engineers, biologists, clinicians, manufacturing, and data analytics experts from multiple MIT academic units, and multiple Singapore-based universities, research centres of excellence, and hospitals who are experienced at translational demonstrations of technologies in safety-regulated industries such as cell therapies.

CAMP’s unique, enabling and cross-cutting capabilities include cell and clinical biology, microfluidics, real-time optics and spectroscopies, 3D-printed devices, process analytics, data analytics, and bioinformatics. This programme will demonstrate these approaches required of cell-based personalized medicine through three translational testbeds (three Flagship Projects), ultimately facilitating access for more patients to life-saving, approved cell therapies for currently intractable health challenges. These flagship projects will address allogeneic and autologous cell therapy products, including but not limited to cell sources including adult stem/progenitor cells and immune cells for treatment of specific cancers, tissue degeneration, and autoimmune diseases.

For information on SMART CAMP: https://camp.smart.mit.edu

Responsibilities

SMART CAMP research focuses on multiple immune cell types and targeted indications, including CAR-T cells for cancer therapeutics. Our experts in immunology at the basic and translational levels work on the development of both the cells’ critical quality attributes (CQA) and culture systems’ process analytic technologies (PAT). This Research Engineer / Senior Research Engineer will assist our researchers in laboratory organization, as well as in research and process development, including experiments related to:

• Immune cell culture and CAR-T cell manufacturing
• Immune cell isolation, activation, transduction, and expansion
• Immune cell characterization and profiling
• Clinical sample processing
• Lentivirus production
• Plasmid preparation

Requirements

• Bachelor of Science / Life Sciences / Bio-Engineering / Chem-Engineering Degree or Diploma.
• Research experience with aseptic cell culture is a must.
• Experience with cellular profiling assays, e.g. flow cytometry staining and analyses, gene and protein expression, cytotoxicity assays.
• Experience with molecular biology assays, e.g. molecular cloning and plasmid preparation.
• Experiece with bioreactors is an asset.
• Good organizational skills and time management.
• Good work ethic and intergrity, and ability to work well in a team.
• Able to communicate effectively in and present data to a multidisciplinary team of researchers with different training backgrounds.

To apply, please visit our website at: http://smart.mit.edu/careers/career-opportunities.

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

Responsibilities

• To champion and liaise with production personnel on the investigation of root cause(s) of non-conformance and procedural failures
• Writing Quality Control plans & Inspection Test Plan (ITP) as per contractual requirements, API and licensors’ requirements
• To prepare, review & approve Quality Documentations such as drawings, first piece, in-process & final inspection reports prior to product release to customers
• To conduct audit, process inspection on sub-contract suppliers and maintenance of Approved Vendor List (AVL)
• In addition to these duties/responsibilities employee is required to carry out all additional duties as & when directed & required by QHSE manager

Requirements

• Min Degree in Engineering or equivalent
• Min 5 years related experience within production environment (desirable)
• Relevant Industrial Quality Training Certification

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

We are searching for a reliable, innovative production engineer to oversee manufacturing processes at our company. You will join our growing team of professionals and be responsible for supervising staff, ensuring health and safety codes are followed, training workers in the responsible use of machinery, identifying problems in the production line, troubleshooting equipment, and completing various administrative tasks.

To be successful as a production engineer, you should be an independent thinker and keen problem-solver. Outstanding production engineers are able to diagnose problems, train staff, and provide effective recommendations.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Purpose

National Cybersecurity R&D Laboratories (NCL) is looking for hiring one creative cyber security R&D engineer who experienced on handling IT/OT/IoT program development, project operations, network security infrastructure of ICS and network system. The engineer will participate in NCL’s IT/OT Cyber Exercise, help to build NCL’s ICS environment/testbed and provide technical support for NCL’s VAPT developing project.

Job Description

• Deploy and maintain cloud-based computing system and network infrastructure.
• Design, setup, configure and troubleshoot network systems.
• Setup, configure, and troubleshoot server systems with different operating systems (Windows, Ubuntu).
• Perform a regular backup of data and application systems.
• Working with other parties (e.g., vendor, provider, ...) for the deployment and troubleshooting.
• Prepare and provide technical support to the end-users and other team members.
• Analyze critical logs, investigate, and troubleshoot technical issues.
• Implement and continuously update security patches for operating systems, servers and network devices to avoid security issues or attacks.
• Ongoing assessment of new threads and improve on computing security.
• Develop and deploy monitoring system for infrastructure.
• Ensure high availability of services through regular server and network maintenance.
• Perform and participate in capacity planning, redundancy planning and execution of Disaster Recovery Plan.

Qualifications

• Minimum three (3) years of relevant working experience.
• Experienced in Virtualization technologies (VMWare, VirtualBox, KVM etc).
• Experienced in complex secured network design, VPN and WLAN implementation.
• Has knowledge in network devices administration (e.g., Firewall, Router, VLAN, Switch etc).
• Familiar with Windows and Linux OS (Ubuntu, CentOS, Redhat etc).
• Able to configure secured Internet services with methods/protocol (e.g. HTTPS, SSH Tunneling, L2TP/IPsec etc).
• Familiar with data storage systems (e.g. FreeNAS, LTO, NFS etc.) and data backup operations on multiple File Systems.
• Enthusiasm for problem-solving and able to work in a fast-paced environment.
• Strong interpersonal skills with the ability to communicate effectively.
• Able to write automation script (e.g. Bash, Python, Ansible etc).
• Experience in private and public cloud environments (e.g., OpenStack, AWS etc).
• CCNA (Routing and Switching) or equivalent certification.
• Experience working with the open-source project.
• Able to write simple code in Python or Java.

COMPANY DESCRIPTION

Red Shield Industries (RSI) is the social enterprise arm of The Salvation Army. By re-using, recycling and restoring donations in kind from the public and corporations, it generates income through its Family Stores to support our mission to provide holistic care to the community.

RSI also strives to assist humanitarian needs in times of crisis and emergency, leveraging on its logistics network to deliever aid to crisis areas in the region quickly and efficiently.

Working closely with local and international organisations, RSI engages them in meaningful programmes for their coprate social responsibility initiatives.

https://www.salvationarmy.org/singapore/red_shield_industries

RESPONSIBILITIES

About The Job

The Process Worker supports the mission of the Red Shield Industries, a social enterprise, highly regarded by public for its excellent delivery donation in kind service which is sensitive and responsive to the community welfare needs and meeting the funding needs of The Salvation Army. It is expected that as a process worker, the job incumbent will sort and distribute donated items according to the guidelines set up to maximize the revenue for The Salvation Armys work.

Key Responsibilities

• Check and process all clothing/toys/bric-a-brac/books/glassware/etc collected are classified as per standard operation procedures
• Ensure items are sorted categorically and distributed efficiently to warehouse for on forwarding to the retail stores.
• Support the execution of the planning and smooth operation of the sorting system and packaging before sending to the warehouse for distribution to the various stores.
• Surrender unclaimed monies or valuables to supervisor who will bring to the attention of the Processing Centre Management.

• Secondary Education
• Physically fit (able to lift 10 to 20 kg of goods)
• Able to stand for long period (4 hours)
• Able to work in non-aircondition environment

Working Hours

• 44 working hours
• Monday to Sunday: 8.30am to 6pm (inclusive 1.5-hours break)

Work Location

The Salvation Army Singapore Red Shield Industries

356 Tanglin Road Singapore 247674

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focusses on developing the technology and demonstrators for Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave passive and active circuits and subsystems.

Note: a design portfolio showcasing RF designs must be attached to the resume.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Several years of experience in the simulation and design of microwave circuits and subsystems.
• Experience in the design of LNA, PA, mixer, control circuitry and antennas.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

Job Description:

• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned from inception to completion within the specified time frame and of the desired quality.
• Liaise with authorities, consultants and subcontractors.
• Implement architectural and structural works.
• Good communication skills to enhance good team working spirit.

Requirements:

• Experience in management of projects will be advantageous.
• Recognized degree in Civil/Structural Engineering by P.E. Board / BCA.
• Initiative, self-motivated, possess a strong drive with high responsibility and result oriented.
• Preferably 1 - 3 years working experience in Civil & Structural works.
• Experience in engineering software and AutoCad would be an advantage.

Responsibilities:

• Design, develop, code, and document larger modules as part of firmware projects and lead a firmware project.
• Rich experience on embedded SoC software development and debug environment setup.
• Work with relevant architects, software and hardware teams to finalize the system level solutions and modularize the firmware development works.
• Utilize low level C coding techniques when developing codebases, follow coding standards and follow standard development best practices.
• Read schematics, utilize oscilloscopes, digital analyzers, and other test equipment in the development and debugging of firmware designs.
• Have fundamental knowledge about the operating system and its common drivers, especially understanding basics of RTOS.
• Have fundamental knowledge about inter-chip communications in heterogenous processor environment, and able to use OpenAMP or RPC such techniques.
• Understand storage devices/controller (i.e. SAS, SATA etc.) driver, protocols and firmware design is a plus.
• Understand power management at system level and OS power management handling is a plus, especially familiar with PMIC firmware.
• Understand the virtualization techniques on server environment is a plus.

Requirements:

• Minimum degree in Bachelors Engineering in Computer Science/Engineering, Electrical Engineering, related field or equivalent experience on embedded system.
• Minimum of 3-5 years of experience
• Experience with implementing embedded operating systems such as Linux, FreeRTOS on target hardware
• Demonstrated experience with C/C++/assembly language programming.
• Demonstrated experience with ability of problem analysis and solving.
• Familiar with RISC-V/ARM ISA is a plus.
• Good team player and be able to prioritize the tasks and delivery the modalized development work.

On behalf of our client who is an Original Equipment Manufacturer (OEM) in the Building Equipment space, we are looking for Mechanical Design Engineers.

Responsibilities

• Provides technical support to projects, Installation on problem verification, report, and coordinates with Group on job site issues and technical solutions related to mechanical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Marketing and Sales staff for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager

Requirements

• Degree in Mechanical Engineering or diploma with a minimum of 5 years of related experience.
• Proficient in Auto CAD & 3D software is essential

Salary will be offered in accordance with experience and qualification.

Location: East

EA License No. : 22C0971 | EA Reg ID : R21101298