Purpose of the Position

Reporting to the Shift Supervisor, the Process Technician's primary responsiblity is to ensure the smooth operation of his/her assigned Process Unit, be it in either the Field or DCS Panel Operation.

Job Description

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists.
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition.
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers, reactors, driers, compressors, pumps, etc according to established practices and procedures.
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Collect process samples from assigned sampling points in a safe manner.
• Equipment Inspection Tours according to checklist.

Requirements

• NITEC in Chemical Process Technology /Diploma in Chemical Engineering or related discipline.
• Min. 1-2 years Operational experience with demonstrable exposure to Process Plant Operations and site-based activity or equivalent.
• Experience in Safety Awareness programs or involvement in Safety Committees will be an added advantage.

Job Description:

• Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units
• Actively involved in job estimation and WIP (Work-In-Progress) tracking
• Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems
• Manage and supervise the Maintenance, Repair & Overhaul (MRO) tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary products
• Deliver allocated and ad-hoc tasks within stipulated timeline and cost
• Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost
• Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations
• Submit investigation reports to relevant authority for approval
• Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained
• Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components
• Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible
• Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts
• Perform other related duties as assigned

Job Requirements:

• Degree in Mechanical/ Mechatronic Engineering
• Experience in Component MRO in related industries
• Experience in effectively leading a team of Technicians
• Experience in SAP System is advantageous
• Knowledge in Army systems will be an added advantage
• Ability to read and interpret schematics and datasheets
• Strong technical skills in troubleshooting Engine, Transmission or Gearboxes
• Competent in Mechanical/Mechatronic system
• Familiar with components testing
• Ability to read and interpret Engineering Drawing and datasheets
• Good communication skills and a strong team player
• Able to work under pressure and tight timeline
• Good analytical and problem-solving skill
• Able to read Manual and Engineering Drawing for any re-engineering work required

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Job Description

The Quality Assurance Engineer is responsible to ensure that all products, processes, methods and equipment are validated and is the quality representative in Quality improvement projects. He/She handles external customer complaints and change management business processes. The QA Engineer expected to lead and drive cross functional team in day-to-day issues, global bench marking activities, internal process robustness and automations. He/She must be inclined to have hands-on understanding of tool and product functionality and production.

In this role, you will have the opportunity/responsibility to:

• Continuous improvement of Core Value Drivers and KPI’s in support of quality and business growth through the rigorous deployment of DBS tools
• Manage CAPA & 8D processes; assure root cause analysis and effectively implement robust CAPA in a timely manner. Follow-up and verification of CAPAs to assure no recurrence. Adhere to corporate escalation and reporting guidelines
• Strong focus on variation reduction using data driven approach and automotive core tools such PFMEA, Capability analysis/SPC. MSA etc.
• Proactively identify leading key Indicators and provide Manufacturing Quality Trend Charts/Analysis and suggest/implement improvements based on the trends.
• Support QMS to meet ISO 9001 requirements. Perform Internal Audits per the annual audit schedule, prepare report, follow-up and verification of completion of actions initiated from audit(s)
• Evaluates work methods, procedures and policies. Tracks progress of qualification status and reliability results & determine disposition of non-conforming processes.
• Lead and Support People engagement initiatives both site and global
• Drive efficiency, automation and digitalization in production & QM methods

The essential requirements of the job include:

• Minimum Bachelor’s degree in Engineering/Science
• Min 5 years relevant working experience in manufacturing with 3 years in Quality Control/Assurance in Semiconductor, Electronics or Automotive Manufacturing.
• Solid understanding of quality tools and methods. (FMEA, Control Plan, SPC, 5Why, FTA, 8D, 6 Sigma, Minitab/JMP)
• Certified Quality Engineer or Certified Lead auditor with thorough understanding of ISO 9001 2015 requirements
• Excellent English communication and Interpersonal skills.

It would be a plus if you also possess previous experience in:

• Previous exposure to the Manufacturing sector.
• Excellent problem-solving and analytical skills.
• Analytical and data visualization skills eg Tableau, Qlikview
• Lean / Kaizen proficiency/ black belt proficiency a plus

Company:

Sopra Steria is a listed European tech leader specializes in Consulting, Digital Service, and Software. We have 60,000 employees worldwide located in different regions (Europe, North America and Asia), whereby Singapore is the HQ for APAC. EvaGroup Asia Pacific is part of Sopra Steria I2S APAC, in charge of Infrastructure, Cloud and Cybersecurity services.

Responsibilities:

Managing and Operating Red Hat Platform Operations Day 2:

• Red Hat Enterprise Linux
• Red Hat Identity Management
• Red Hat Satellite
• Red Hat Ansible Automation Platform
• Installation/Configuration/Hardening/Maintenance/Patching
• Maintain System Security
• Advanced Troubleshooting
• Performance Tuning
• Capacity Management
• Preventive/Proactive Support
• Incident/Change/Problem Management

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Minimum 3 years of hands-on experience with Red Hat Enterprise Linux administration.
• Familiarity with security tools and protocols in a Linux environment.

Preferred Qualifications:
Red Hat Certified Engineer (RHCE) or Red Hat Certified System Administrator (RHCSA).

Job Description

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review Architectural drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Degree in Civil/Structural Engineering.
• Minimum 5 years Site/Working Experience.
• Good Organizational and planning skill.
• Able to work independently and as a team.
• Candidates with Marine Project experience preferred.

Requirement:

• Strong technical aptitude and the ability to understand and explain complex products and solutions
• Excellent communication and interpersonal skills, with the ability to build and maintain relationships with customers
• Problem-solving skills and the ability to think creatively to overcome challenges
• Strong negotiation and presentation skills
• Proficiency in Microsoft Office Suite and customer relationship management (CRM) tools
• Willingness to travel within the region as needed

Job Description:

• Proactively identify and pursue new sales opportunities within your assigned territory
• Develop and execute targeted sales strategies to meet and exceed sales targets
• Provide technical expertise and support to customers, ensuring their needs are met
• Collaborate with cross-functional teams to deliver seamless customer experiences
• Continuously monitor market trends and competitor activities to identify new avenues for growth
• Maintain accurate records of all customer interactions and sales activities
• Represent the company at trade shows, conferences, and other industry events

Inspection Engineer (Tankage)

Job Description:

Inspection on various tanks such as basic repair and maintenance.

Performed regular inspections to ensure Quality Assurance on the various installed materials in the facility.

Manage the inspection process regularly by determining the corrosion rate.

Perform internal/external inspections on storage tanks and to generate reports with repair recommendations.

Monitor the tank inspections on regular intervals.

Performed various quality assurance procedures on the tanks.

Maintain records of all inspection process carried in both hard copies as well as electronic copy.

Perform inspection asper various quality assurance procedures on the tank’s asper client criteria.

Perform internal and external inspections to determine if it meets the acceptance criteria of a specific code, standard or document.

Properly interpret regulations, codes, and industry standards.

Computer usage to compile and submit daily reports, inspection reports, and inter-office communications.

Pay attention to detail and be capable of recommending and approving repairs as well as performing visual inspection of completed work.

Maintains a positive relationship between client, facility, and customer; and promote a positive attitude towards co-workers.

Compile and submit completed inspection reports in a timely manner.

Inspection of various storage tanks in accordance with API inspection codes and Recommended practices asper API- 620, 650 and 653.

To provide technical expertise on all NDT matters as required on projects.

Qualifications:

Degree in any related engineering/science field from a recognized university

Candidates with a Diploma in Mechanical Engineering, preferably with more than 15 years of experience in the petrochemical industry working in fixed equipment or inspection related areas

Knowledge of materials selection, Non-Destructive Examination techniques, welding, and risk-based inspection procedures, would be an advantage

Familiarity with major API codes and specially API 650 for tankage will be an added advantage

Knowledge and ability to use computer programs such as MS Office, etc.

Willingness to work extended hours, not afraid of heights and working in confined spaces

A team player with strong communication and interpersonal skills

Capable of effectively driving milestone planning for Equipment Strategy development with key members from various functions

Candidates having work experience with ExxonMobil will be prioritized.

Established in 2017, QCP is one of the first digital asset trading firms in Singapore, with a vision to partner the next generation of investors to unlock institutional opportunities in digital assets. 

QCP brings to clients deep expertise gained from thriving through multiple market cycles. A global market maker in digital asset derivatives with a vast network of liquidity providers and counterparties, we are shaping the future of digital asset markets through greater access and efficiency. 

We offer a range of tailored derivatives and spot trading as well as structured solutions to institutional, professional and accredited investors. We also provide 24/7 liquidity across various markets in partnership with various exchanges and platforms. 

QCP is headquartered in Singapore and is supported by a strong team of professionals in trading, business development, operations, risk and compliance teams.

Our in-house publications track the constantly evolving state of digital assets and markets, and can be accessed on our Telegram (t.me/QCPbroadcast), website (qcpgroup.com), Twitter (@qcpgroup) and LinkedIn.

Responsibilities

As an Entry-Level Cloud Engineer at QCP Capital, you will play a key role in supporting the design, implementation, and maintenance of our AWS infrastructure. You will be part of the Technology Operations team, reporting to the Head of Technology, and will work closely with cross-functional teams to ensure our cloud-based systems' availability, scalability, and security. This is a great opportunity for a recent graduate with a passion for cloud technologies to gain hands-on experience and grow their skills in a dynamic and fast-paced environment.

• AWS Infrastructure Management
• Assist in the design, deployment, and maintenance of scalable and highly available AWS infrastructure.
• Support the implementation and management of AWS services such as ECS, EC2, S3, RDS, Lambda, Networking, and others as needed.
• Monitor and optimize resource usage, performance, reliability, and costs.
• Monitor and improve AWS network performance.
• Security and Compliance
• Participate in regular security assessments and audits to ensure compliance with industry standards.
• Work closely with the security team to assist in responding to and remediating security incidents.
• Support efforts to enhance cloud infrastructure and data protection following Well Architected Framework principles.
• Automation
• Develop basic infrastructure as code (IaC) using tools such as Terraform, CloudFormation, or the Cloud Development Kit (CDK).
• Learn to implement automation scripts to streamline routine tasks and improve operational efficiency.
• Assist in setting up CI/CD pipelines.
• Monitoring and Alerting
• Help set up and configure monitoring and alerting systems to proactively identify and resolve issues.
• Collaborate with other teams to respond to and resolve incidents.
• Collaboration
• Work closely with development and production teams to ensure seamless integration of cloud services.
• Provide technical support and assistance to team members and stakeholders as needed.

• Bachelor's degree in Computer Science, Computer Engineering, or a related field.
• 0-2 years of experience in cloud engineering, software development or related fields.
• Experience with programming languages (e.g., Python, Bash) is mandatory.
• Experience with docker and containerization is a plus.
• Good understanding of Networking.
• Familiarity with infrastructure as code tools (Terraform, CloudFormation, CDK) is a plus.
• Knowledge of CI/CD pipelines, cloud architecture, security and DevOps practices is an advantage.
• Strong problem-solving skills, eagerness to learn, and excellent communication skills.
• Able to work independently.
• Interest in building a career as a Cloud Engineer with a focus on AWS.
• AWS certifications (e.g., AWS Certified Solutions Architect, AWS Certified Developer) are an added bonus, but not required.

The Environment We Offer

As a growing firm with a tightly-knit team, we respect and listen to all our employees. You will get the chance to make an impact by having your voice heard by everyone, including the management.

Our employees enjoy a high level of autonomy at work. We focus on substance, not form - as long as you can perform, you will be recognized and rewarded. We are also dedicated to supporting our staff and ensuring they develop holistically to maximize their potential in the long- term.

We also provide flexible working arrangement as required and a casual and fun environment to boot!

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

• He/She is required to prospect for new accounts, maintain existing accounts, and build relationships with newly acquired customers.
• Service corporate accounts and manage full sales cycles
• You are required to apply appropriate strategies to increase sales.
• Keep updated on market competition and prices
• Attend site meetings and responsible to liaise with our customers on their solution needs and after sales need.
• Follow up and process sales orders, sales report generation, project management and sales presentations.
• Corresponding with customers on quotations and purchase order related issues.
• Manage daily sales inquiries and quotations via email and phone for both existing and new clients.
• Work closely & coordinate with the indoor team to maximize sales figures.
• Liaise with operation team and ensure timely delivery of customers’ orders
• To prepare report after Job Done / Pump Repair Done. (Training will be provided)
• Carry out risk assessment; Make recommendations on risk control measures and Communication Risk Assessments (RA) to concerned parties and other Method of Statement. (Training will be provided)
• Any other ad hoc duties assigned

Requirements:

• A degree or diploma holder preferably in Mechanical Engineering or a related field.
• Applicants with no working experience are welcomed (Training provided)
• Strong knowledge of pumps and their applications is highly desirable
• Experience in engineering sales/customer service is a plus.
• Proficiency in AutoCAD, Excel, and PowerPoint
• Willingness to travel for business purposes as required
• Excellent communication and interpersonal skills.
• Willing to learn, pleasant personality, humble responsible, positive working attitude and hardworking.
• Ability to work independently and as part of a team.
• Proficiency in Mandarin to liaise with Mandarin-speaking clients and suppliers.
• Salary base on the working experience, additionally + Commission
• Flexible and able to Support on Saturday if required.
• Class 3 driving license with own vehicle.

ATTRACTIVE REMUNERATION PACKAGES WILL BE OFFERED TO THE RIGHT CANDICATE

Kindly send us your updated resume indicating your current and expected salary to: [email protected]

We regret that only shortlisted candidate will be notified.

Visit us at: https://www.acms.com.sg

Job summary

Attractive salary package

Learning & Development opportunity

Positive Working Environment Commission

• Assist in the planning and scheduling of construction activities.
• Coordinate with architects, subcontractors, and suppliers to ensure project specifications are met.
• Conduct site inspections to ensure compliance with safety and quality standards.
• Supervise and manage on-site construction activities.
• Monitor project progress and provide regular updates to the project manager.
• Ensure all materials and workmanship meet the required standards and specifications.
• Implement and enforce health and safety protocols on the construction site.
• Conduct safety audits and inspections to ensure a safe working environment.
• Prepare and submit reports on project status, costs, and any issues or delays.
• Liaise with clients, architects, engineers, and other stakeholders to ensure smooth project execution.
• Attend project meetings and provide updates on construction progress and challenges.

Requirements

• Required language(s): Chinese, English (in order to liaise with the English & Chinese speaking associates)
• Graduate with no experience welcome.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Good team player and problem solver.

Job Responsibilities

• Provide effective and timely services and support all existing scheduled projects
• Provide sales support on technical specification & information, data, drawings
• Project quotation specification confirmation and technical clarification
• Design accessories and create 3DCAD drawings for quotations and assemblies
• Provide consultation and offer workable solutions to help solve customers’ concerns
• Do on-site technical assessment and provide engineering solutions
• Presentation and training to internal and customers
• Ensures quality by completing all final inspections and repair reports

Requirements

• Degree/Diploma in Mechanical / Instrumentation / Mechatronics Engineering or equivalent
• Ability to operate 3DCAD (Solid Works)
• Good knowledge onl valves and instrumentation is preferred.
• Related experience in process & control or instrumentation service industry is preferred.
• Decisive, drive and ability to deliver effective, innovative solutions
• Good knowledge of Microsoft excel, word and powerpoint
• Be able to work long term with us
• English fluency (meeting and writing reports inside and outside the company)
• A person who has positive and can think and act for himself/herself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication and interpersonal skills at all levels.

Reporting Function

• Directly report to Engineering Manager/General Manager

• Site & office project management and daily operations including inspections, handover, site measurements, project management
• Handling technical and engineering issues
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Liaison and meeting with client's representatives, relevant authorities and consultants
• Site co-ordination, monitoring and report work progress
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of projects
• Conduct site check on the repair works, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions

Job Requirement:

• At least Diploma, Advanced Diploma, Bachelor’s Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent
• 0 - 2 Year(s) of experience in sales of products & services, preferably in Engineering Industry
• Good communication skills and networking skills
• Self-drive & motivated individual
• Salary will be paid based on experiences and qualifications

Job Summary:

The Project Engineer is responsible for planning, coordinating, and executing engineering projects, ensuring they are completed on time, within budget, and to the required quality standards. This role involves working closely with project managers, engineering teams, and other departments to ensure successful project delivery. The Project Engineer will be involved in project planning, technical review, and site coordination, providing essential support throughout the project lifecycle.

Key Responsibilities:

• Project Planning and Coordination:Assist in defining project scope, objectives, and deliverables, ensuring alignment with client requirements and business goals.
  Develop and monitor project schedules, budgets, and work plans, using project management tools to track progress and ensure timely completion.
  Coordinate with engineering, procurement, and construction teams to ensure alignment on project milestones and deliverables.
  
• Technical Support and Design Review:Review and interpret technical drawings, specifications, and documentation to ensure engineering quality and compliance.
  Provide technical input to the design process, working closely with design teams to address any engineering challenges.
  Support project manager in evaluating design changes, assessing their impact on project schedules and budgets.
  
• Site Coordination and Quality Control:Conduct site visits as needed to monitor project progress, identify issues, and ensure compliance with design specifications and safety standards.
  Coordinate with contractors, vendors, and suppliers to ensure materials and equipment meet quality requirements and project specifications.
  Assist in conducting quality control inspections, ensuring that installations align with engineering and regulatory standards.
  
• Documentation and Reporting:Prepare and maintain project documentation, including status reports, meeting minutes, and technical documents.
  Provide regular updates to project managers on project progress, potential risks, and any adjustments needed to stay on track.
  Support procurement activities by reviewing material specifications and participating in vendor evaluations as necessary.
  

Qualifications and Experience:

• Bachelor’s degree in Engineering (Mechanical, Civil, Electrical, or a related field).
• 3-5 years of experience in a project engineering role, preferably in [specific industry, e.g., oil and gas, construction, manufacturing].
• Proficiency in project management software (e.g., MS Project, Primavera) and CAD software (e.g., AutoCAD).
• Familiarity with industry standards and codes relevant to engineering projects.

RESPONSIBILITIES & DUTIES

• Assist the Production Manager in the scheduling of all incoming jobs and ensure close monitoring and timely delivery.
• Assist the Production Manager in taking charge of all coating (HVOF and Armoloy) jobs and ensure delegation and coordination on the necessary works.
• Understand the full requirements of all manufacturing, servicing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Ensure all budgets and plans are met.
• Assist the Production Manager to monitor and manage workshop loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans.
• Attend weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager to work closely with all Production Supervisors to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Identify the skill level of each reporting employees and distribute suitable work tasks to achieve higher throughput.
• Manage and resolve grievances and conflicts arising. Motivate employees to boost their morale.
• Work with Production Manager, Engineering Manager, General Manager and HR department to develop, implement and conduct training to enhance the competency or upgrading of skills for production employees.
• Conduct annual performance appraisal for all reporting employees.
• Work closely with the QHSE Manager/ MR to resolve quality issues.
• Perform review on PCR and work closely with the sales, engineering and quality department or customer to clarify all technical specifications and job requirements.
• Assist the Production Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager in initiating purchase requisition for any requirements.
• Assist the Production Manager in preparing monthly reports whenever required.
• Work closely with all departments to resolve any arising issues.
• Assist the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Accountability

• Control, lead, develop and motivate all reports.
• Monitor and ensure on time delivery of finished product.
• Minimize rework and rejection rate.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.
• Report all unsafe acts, infrastructure and environment to his Manager.

QUALIFICATION & EXPERIENCE

· Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.

· Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

RESPONSIBILITIES & DUTIES

§ Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.

§ Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.

§ Generate PCR and manufacturing process plan.

§ Generate engineering drawings and perform drafting.

§ Support Asst. Engineering Manager on the job costing.

§ Continuously explore for new manufacturing method or new external providers to support the production.

§ Work closely with the Production Supervisor to resolve any production issue.

§ Support the procurement department to deal with external providers on all technical issues.

§ Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.

§ Follow safe work practices and procedures.

§ Ensure company and QHSE policies and procedures are adhered to at all times.

§ Participate/ attend all functions, activities and meeting organized by the company.

§ Perform other assignment and duties as and when required.

§ Welcome Fresh Gradutes

handle drawings

allot jobs for project incharge

follow up with client

Job Responsibilities

• Involve in the analysis, design, documentation, coding, and testing of our applications
• Performing unit and integration testing
• Conducting functional and non-functional testing
• Troubleshoots production problems related to software applications
• Resolves problems and responds to suggestions for improvements and enhancements
• Evaluating current applications to update or add new features
• Ability to work independently on assigned tasks.
• Assist with project plan time estimates and ensure development milestones are met
• Performs any additional duties assigned by the immediate supervisor or senior management

Job Requirements

• Candidate must possess at least a Diploma and above
• At least 1 Year(s) of working experience in the related field is required for this position
• Required Skill(s): Well-versed in ASP.Net (MVC) and knowledge of Microsoft SQL.
• Ability to thrive in a fast-paced environment

Are you an experienced Commissioning Engineer and do you want to leave your mark on the global energy industry? If so, we want to hear from you!

Semco Maritime in Singapore is looking for commissioning engineers as an expansion of our engineering team engaged in Telecommunication Systems – PAGA, PABX, CCTV, GMDSS Radio System, VSAT System, UHF Repeater System etc. solutions for the Offshore and Onshore Oil & Gas Industry.

Job Tasks

You will be involved primarily in fabrication, installation, and commissioning of telecommunication systems.

You may also be required to assist lead engineer / project manager in the daily execution of ongoing projects.

Qualifications/Requirements:

• A Degree in Telecommunication / Electrical / Electronic Engineering.
• Some relevant working experiences in the Oil and Gas industry would be advantageous.
• Strong knowledge in various Telecommunication Systems, especially one or two of following:

1. GMDSS Radio
2. VHF Aeronautical Radio and Helicopter Navigation Beacon e.g. NDB
3. UHF Active Repeater System with TX & RX Combiners
4. Crane & Life Boat Radios
5. Leaky Feeder and Passive Antenna
6. VSAT Systems with Stabilized Antennas
7. ENT/IPTV & TVRO Systems with Stabilized Antennas
8. CCTV Systems
9. PAGA systems
10. PABX systems
11. LAN/WLAN and IP-PABX Systems
12. EPOB System
13. ENV/HMS & Weather Monitoring Systems
14. PNS, P.R.S. & Navigation Systems
15. TNMS System
16. Telecom Shutdown Systems

• Hands-on experience on configuration, programming, troubleshooting, installation and commissioning of the above systems
• High responsibility and ownership on delivering high quality work within given project schedule
• Ability to multi task and work under pressure
• Team player with cooperation spirit and excellent coordinating skills, as well as capable of working independently
• Pro-active and have right working attitude
• Self-motivating and willing to learn
• Possess good interpersonal, communication and technical writing skills.
• Knowledge of application software e.g. Word, Excel, AUTOCAD etc.

You will be part of a dynamic worldwide team of engineers which will require your ability to work, and cooperate with local engineers as well as Semco’s engineers around the world.

Please send us your resume with the wording “Commissioning Engineer, Telecommunication” in the subject field, stating your credentials and past job experience with your application. Please state your expected salary, required time for notification and reasons for leaving your present position, if available.

We regret that only shortlisted candidates will be notified.

Welcome to Semco Maritime

At Semco Maritime, we create change. For people. For projects. And for the global energy sector. With us, you will join a community of over 2,200 of the most dedicated thinkers and doers in the energy industry who are driving real change and making their own personal mark on the global energy landscape.

While everyone knows why the energy transition is vital, we are concerned with the journey. How to get there. By providing the answers needed to make change real. Because we believe that global energy ambitions can only be realized through hard work and clever pragmatic solutions. This is what we do. This is what we invite you to

participate in.

So yes, working for us will change the energy sector – and may well change you too.

Care to join the movement?

Change. With us.

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

- project management: Liaise with contractor to set up charger including Router , LAN or SIM. Link API to platform.

- ⁠Repair & maintenance Troubleshooting , replacement of parts, liaise with factory; logging & data retrieval.

- ⁠planning & leads a team for charger maintenance. Offer service to customer.

- ⁠Apply LTA technical requirements .

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

About The Role

Zero-Error Systems (ZES) is seeking a Product Engineer to join our team and help us revolutionize the industry. As a Product Engineer, you will join a team of specialised engineers to design, verify, test, and operationalise our System-on-Module (SoM) products by using high-performance Field Programmable Gate Arrays (FPGA) SoC devices.

Key Responsibilities

• Work closely with the product development team, and be involved in the FPGA product development lifecycle including system design, IP development, testing, application-use case, and production
• Contribute to the full design methodology (from front-end to back-end) based on FPGA, including the design of customized circuits/Intellectual Properties (IPs)/systems and the configuration/programming of macro-IPs (e.g, ARM cores, and communication interfaces) within FPGA cores
• Create and review the test programs to support and validate the FPGA product development
• Support the FPGA design upgrade
• Maintain and provide good documentation for the FPGA product development
• Any other duties assigned

Key Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Xilinx or Altera
• Good knowledge of Verilog register-transfer-logic design and hardware functional verification concepts/test methodology is desirable.
• Hands-on experience in FPGA development tools such as AMD/Xilinx VivadoExperience in digital design and embedded software development using FPGA will have added advantage.
• Comfortable in Linux environment, and programming skills/experience in C/C++ are preferred.
• Good problem solving and failure analysis skills
• Good team player and results-oriented
• Excellent communication skills

Measures of Performance

• FPGA Platform - Setup/Installation/Maintenance of an FPGA platform to support the product development
• Hardware/Software Validation - Together with the team, qualify/quantity the performance/functional of the FPGA products, including Hardware/Software co-design
• Product Demonstration - Together with the team, demonstrate the application use-case for the FPGA products

For interested candidates, please forward your resume to ZES HR at [email protected]

Job Descriptions

1. Manage the day-to-day sales activities for the semiconductor manufacturing equipment products (e.g. CMP tool) within the designated sales territory so as to achieve the sales target set by management.
2. Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
3. To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts. Manager is expected to make directions for the team to achieve these sales targets
4. To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products (e.g. CMP tool)
5. To make, develop and manage the localized marketing and sales program for the sales territory.
6. To communicate with the sales team to understand customer demands and offer sales support where necessary.
7. To work with EC to set the industry pricing level.
8. To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
9. To work closely with EC on the new accounts and new products, using the local team to win new contracts.
10. Establish customer rapport an acceptance
11. Any other duties as assigned by the management

Job Requirements

1. Knowledge of commercial and shipping documents (Incoterms)
2. Knowledge of the semiconductor manufacturing equipment products(e.g. CMP Tools).
3. Diploma/Degree in Engineering or equivalent
4. Good people skills with a pleasant personality.
5. Strong communication, interpersonal and customer service skills.
6. Excellent presentation and negotiation skills.
7. Ability to work independently as well as collaboratively within the team.
8. Must be prepared to travel overseas for training and to our customers’ location in the region as required.

Preferably to have Sales work experience in Japanese company in semiconductor industry for more than 5 years.

(Those without the relevant experience may be appointed as Senior Sales Engineer initially with a view to be upgraded later)

(Those with more years of relevant experience may be appointed to a relevant management position)

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday

Job Descriptions

• Schedule maintenance activities for chillers systems, keeping track of maintenance works with follow up actions for chillers.
• Ensure all maintenance works are carried out according to prescribed checklist and schedule
• Responsible for testing & commissioning/ fine tuning of new chiller with minimal guidance, such as coordinate project execution at site, witness FAT and conduct SAT to ensure the chiller operating conditions according to target performance.
• Ability to interpret as-built documents, schematic drawings, technical documents as well as analyze operating data from chillers and know how to identify and repair any issues that arise.
• Responsible for on-site management of the chiller overhaul/ repair works and supervise subcontractor work; effectively control the service quality and progress.
• Preparation of service report for each service assignment.
• Assuage dissatisfied customers on service issues such as provide prompt and effective resolution to technical problems on chiller and recommend preventive measures.
• Preparation of risk assessments prior and ensure safety procedures and conduct during service and repairs.
• To ensure all works carried out safely and/or in accordance with safety procedures.
• Any other tasks, when required by Department Manager.

Job Requirements

• Minimum ITE Certificate with Merit in Engineering or Diploma in Mechanical Engineering.
• Minimum 3 years of relevant chiller experiences.
• Preferably Singaporean or SPR
• Able to guide and troubleshoot HVAC faults especially modular screw chillers, centrifugal chillers and absorption chillers.
• Good communication skills both verbal and written as well as preparing service reports.
• Has a good safety mindset and displays good WSH behavior.
• Short term working at overseas maybe required.

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday
• ※ Most of the time they are outside of the office