We are now seeking Field Service Engineer to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Perform inspection, installation, commissioning, repair, upgrading, troubleshooting and related service work on offshore drilling platforms, land rigs, Shipyard or in workshops.
• Liaise with rig’s management during offshore assignment.
• Communicate with respective Managers for briefing and debriefing of service-related activities.
• Fill in necessary job reports, ISO work instructions and checklists required for all work in a timely manner.
• Interface with relevant departments to obtain a thorough understanding of NOV products and how they are safely operated, tested, calibrated and problems are resolved in a timely manner.
• Communicate field failures and feedback reports to the appropriate departments.
• Install, commission, troubleshoot, and repair NOV drilling equipment
• Provide training to other NOV personnel on the following systems and equipment as needed.
• > Analog and digital PLC based systems
• > Proprietary integrated control systems (Cyberbase, Amphion)
• > Variable Frequency Drives
• > Hydraulic/Pneumatic Systems
• > Electrical Systems (including various types of AC/DC motors)

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.
• Travelling on short notice is required. approximately 50% travelling.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand electrical schematics and PLC programs. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

- project management: Liaise with contractor to set up charger including Router , LAN or SIM. Link API to platform.

- ⁠Repair & maintenance Troubleshooting , replacement of parts, liaise with factory; logging & data retrieval.

- ⁠planning & leads a team for charger maintenance. Offer service to customer.

- ⁠Apply LTA technical requirements .

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

Job Title: DCS Engineer

Work Location: Jurong Island

Expected Start Date: 01 January 2025

Responsibilities for this position may include but not limited to:

• Provides engineering design, troubleshooting and maintenance of Distributed Control System (DCS)
• Troubleshoot day-to-day process problems related to process control applications, controller tuning and batch receipes execution
• Supports Process Hazard Analysis and implements process changes through a Management of Change Process
• Maintains up-to-date documentations for the DCS
• Conducts training programs for operators on DCS & Batch Receipes
• Initiates and manages DCS hardware life cycle, software and process control network upgrades
• Leads / supports development and execution of control system pojects, and greenfield projects

Required Qualifications

• Bachelor's Degree in Electrical / Electronics / Instrumentation and Control / Chemical from an accredited university
• Minimum 5 years of related work experience in DCS in the refinery, petrochemical or checmical industry
• Strong analytical / trouble-shooting skills
• Good interpersonal and communication skills
• Able to work independently in a team and in a diverse enviroment.

Preferred Qualification:

• Knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Knowledge in SQL Programming / Power BI, Process Controls Domain & Network adminstration.

Intersted candidates, do drop me your resume @ [email protected]

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are looking for a dedicated and skilled Assistant Engineer to support our maintenance team in ensuring the smooth operation of all machinery and equipment. This role is ideal for someone who has a strong technical foundation and is eager to learn and grow within a maintenance engineering environment. The Assistant Engineer will assist with routine maintenance, troubleshooting, and repairs while ensuring safety and efficiency in all tasks.

Be Part of Our Success

• Assist senior engineers in routine maintenance tasks and repairs on equipment
• Aid in diagnosing and addressing minor issues promptly to reduce downtime
• Help carry out scheduled preventive maintenance tasks to keep equipment in optimal condition
• Record maintenance activities accurately, including repairs, replacements, and inspections, under the guidance of senior engineers
• Ensure all work adheres to safety standards and regulations; actively maintain a safe working environment
• Assist in managing spare parts inventory, notifying senior staff of low stock and needed reorders
• Work closely with the maintenance and production teams to complete tasks and support the overall maintenance strategy

Qualities We Value

• Diploma in Engineering
• Ability to diagnose and repair complex systems
• Able to adapt and work under tight schedule
• Able to communicate effectively with customers
• Strong analytical skills to identify issues and implement effective solutions
• Possess class 3 driving license
• Working location is in Ang Mo Kio
• Singaporeans only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated
• Meaningful work and projects that make a difference in people’s lives
• A fun, passionate and collaborative workplace
• Competitive remuneration and comprehensive benefits

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field

Tasks and Responsibilities

• Overseeing the regular maintenance and repair of shipyard facilities, including buildings, docks, cranes, and other equipment.
• Planning and executing facility improvement projects, such as building renovations, dock expansions, or utilities upgrading.
• Ensuring all facilities adhere to safety regulations and standards.
• Developing and managing budgets for facility maintenance and improvement projects.
• Identify opportunities to improve energy efficiency in shipyard operations and implement cost-saving initiatives.
• Ensuring compliance with environmental regulations and implementing sustainable practices.
• Identify potential risks to shipyard facilities and operation processes.

Job Requirements

• 2 years of experience in heavy industry, preferably Shipbuilding industry.
• Read technical diagrams and schematics for work planning and issue resolution.
• Diagnose or troubleshoot faults in the plants and machinery.
• Carry out electrical wiring / mechanical installation and technical maintenance works.
• On-site installation, system setup, calibration, testing, onsite repairs and preventive & corrective maintenance.
• Ability to identify and resolve issues related to facility operations.
• Experience in developing and managing budgets.

Job Responsibilities:

1. Utilize wireless vibration sensors & cloud-based diagnostic analysis software to provide clients with remote diagnostic analysis of machinery health services.
2. Collaborate with client maintenance teams to develop and implement condition-based monitoring programs, and reliability-centered maintenance (RCM) strategies.
3. Continuously monitor asset performance through PHM remote diagnostic services, identify opportunities for improvement, and develop and implement reliability improvement initiatives.
4. Perform data analysis, failure mode and effects analysis (FMEA), and root cause analysis to identify potential failures, their impact, and underlying causes. Offer technical guidance and support to the stakeholders in optimizing asset reliability and performance.
5. Responsible for the vibration alarm setting and optimization, diagnostic models on the PHM system.
6. Collaborate with PHM solution engineers to perform data verification and analysis work.

Requirements: -

1. Proven experience (over 3 years) in reliability engineering & vibration diagnostic field, with the ability to independently diagnose equipment faults, and offline testing experience.
2. ISO Category III certification. Understanding of equipment reliability, predictive maintenance strategies, root cause analysis, and equipment data analysis.
3. Familiar with the principles and maintenance of rotating equipment (such as motors, gearboxes, fans, pumps, etc.)
4. Preferably with bachelor’s degree in engineering, or a related field (Mechanical, Electrical, Industrial, etc.), specializing in equipment fault diagnosis would add advantage.

Job Descriptions

• To do up products specifications for main contractors, architects, Consultants
• Establish Communicative Business Relationship With Prospective Clients at long term.
• Be the account manager for the projects

Job Requirements

• Candidate must possess at least a Diploma & Above, preferably construction related.
• Self Confidence, strong analytical mind, able to communicate with various professionals and different site personnel, friendly, team player & target oriented.
• Possess own car
• Required skill(s): MS Excel, MS Powerpoint, MS Word.
• At least 2 year(s) of working experience in the related field is required for this position.
• At least Project based type Sales Experience
• Handling Specifications

Benefits

• $600 transport allowance
• Can claim home season parking, parking fees and ERP charges pertaining to work can be claimed on reimbursement basis.
• Petrol Fleet card given
• Company mobile line, phone and laptop will be provided
• Annual leave starts from 10 days
• Entitled to quarterly profit sharing, have quarter sales target which set by HQ and once they exceed the sales target, they will have the profit sharing on the excess amount. Personal target will be set by HOD, once hit then is eligible for the profit-sharing pool. Team work is important.

Working Hours

• Mon - Fri, 5 days work week
• 8.30 - 18.00

About The Role

Zero-Error Systems (ZES) is seeking a Product Engineer to join our team and help us revolutionize the industry. As a Product Engineer, you will join a team of specialised engineers to design, verify, test, and operationalise our System-on-Module (SoM) products by using high-performance Field Programmable Gate Arrays (FPGA) SoC devices.

Key Responsibilities

• Work closely with the product development team, and be involved in the FPGA product development lifecycle including system design, IP development, testing, application-use case, and production
• Contribute to the full design methodology (from front-end to back-end) based on FPGA, including the design of customized circuits/Intellectual Properties (IPs)/systems and the configuration/programming of macro-IPs (e.g, ARM cores, and communication interfaces) within FPGA cores
• Create and review the test programs to support and validate the FPGA product development
• Support the FPGA design upgrade
• Maintain and provide good documentation for the FPGA product development
• Any other duties assigned

Key Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Xilinx or Altera
• Good knowledge of Verilog register-transfer-logic design and hardware functional verification concepts/test methodology is desirable.
• Hands-on experience in FPGA development tools such as AMD/Xilinx VivadoExperience in digital design and embedded software development using FPGA will have added advantage.
• Comfortable in Linux environment, and programming skills/experience in C/C++ are preferred.
• Good problem solving and failure analysis skills
• Good team player and results-oriented
• Excellent communication skills

Measures of Performance

• FPGA Platform - Setup/Installation/Maintenance of an FPGA platform to support the product development
• Hardware/Software Validation - Together with the team, qualify/quantity the performance/functional of the FPGA products, including Hardware/Software co-design
• Product Demonstration - Together with the team, demonstrate the application use-case for the FPGA products

For interested candidates, please forward your resume to ZES HR at [email protected]

Job Descriptions

1. Manage the day-to-day sales activities for the semiconductor manufacturing equipment products (e.g. CMP tool) within the designated sales territory so as to achieve the sales target set by management.
2. Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
3. To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts. Manager is expected to make directions for the team to achieve these sales targets
4. To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products (e.g. CMP tool)
5. To make, develop and manage the localized marketing and sales program for the sales territory.
6. To communicate with the sales team to understand customer demands and offer sales support where necessary.
7. To work with EC to set the industry pricing level.
8. To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
9. To work closely with EC on the new accounts and new products, using the local team to win new contracts.
10. Establish customer rapport an acceptance
11. Any other duties as assigned by the management

Job Requirements

1. Knowledge of commercial and shipping documents (Incoterms)
2. Knowledge of the semiconductor manufacturing equipment products(e.g. CMP Tools).
3. Diploma/Degree in Engineering or equivalent
4. Good people skills with a pleasant personality.
5. Strong communication, interpersonal and customer service skills.
6. Excellent presentation and negotiation skills.
7. Ability to work independently as well as collaboratively within the team.
8. Must be prepared to travel overseas for training and to our customers’ location in the region as required.

Preferably to have Sales work experience in Japanese company in semiconductor industry for more than 5 years.

(Those without the relevant experience may be appointed as Senior Sales Engineer initially with a view to be upgraded later)

(Those with more years of relevant experience may be appointed to a relevant management position)

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday

Job Descriptions

• Schedule maintenance activities for chillers systems, keeping track of maintenance works with follow up actions for chillers.
• Ensure all maintenance works are carried out according to prescribed checklist and schedule
• Responsible for testing & commissioning/ fine tuning of new chiller with minimal guidance, such as coordinate project execution at site, witness FAT and conduct SAT to ensure the chiller operating conditions according to target performance.
• Ability to interpret as-built documents, schematic drawings, technical documents as well as analyze operating data from chillers and know how to identify and repair any issues that arise.
• Responsible for on-site management of the chiller overhaul/ repair works and supervise subcontractor work; effectively control the service quality and progress.
• Preparation of service report for each service assignment.
• Assuage dissatisfied customers on service issues such as provide prompt and effective resolution to technical problems on chiller and recommend preventive measures.
• Preparation of risk assessments prior and ensure safety procedures and conduct during service and repairs.
• To ensure all works carried out safely and/or in accordance with safety procedures.
• Any other tasks, when required by Department Manager.

Job Requirements

• Minimum ITE Certificate with Merit in Engineering or Diploma in Mechanical Engineering.
• Minimum 3 years of relevant chiller experiences.
• Preferably Singaporean or SPR
• Able to guide and troubleshoot HVAC faults especially modular screw chillers, centrifugal chillers and absorption chillers.
• Good communication skills both verbal and written as well as preparing service reports.
• Has a good safety mindset and displays good WSH behavior.
• Short term working at overseas maybe required.

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday
• ※ Most of the time they are outside of the office

Job Responsibilities

• Prepares Primavera P6, to monitor the progress and substantiate time and cost entitlements.
• Prepares preliminary master schedule for pre-tender, tender and contract programmes.
• Prepares and maintains an intergrated schedule of drawings, procurement, construction, test & trials, integrated logistic plan using Primavera P6.
• Prepares baseline schedule which includes resource loading using Primavera P6.
• Identify descrepancies, delay and provide recovery schedule to Project Manager.
• Assist with the preparation of Extension of Time (EOT) claims, including presentations to clients.
• Prepares progress reports and progress audits, inclusing S-Curves, progress trackers and programming health checks.
• Prepares receovery programmes and presentations summarising key recovery strategies.
• Prepares detailed commissioning programmes
• Prepares baseline schedule which includes resource loading and cost loading.
• Provides advise on post-contract claims, reviews, disputes and litigation on programming.
• Any other ad-hoc duties as assigned by superior.

Job Requirements
• Degree in Civil Engineering or equivalent
• Min. 2 -3 years experience in the same field or equivalent
• Must have Primavera P6 Certificate
• Good team player and ability to work in a fast-paced environment
• Hands-on experience with Primavera for (2 to 4 years experience)

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Job Responsibilities:-

1. Primarily responsible for the development of wireless vibration temperature data acquiring solutions for industrial enterprises and rotating equipment ends, managing the entire process from pre-sales solution design to project delivery for major client projects. This includes PHM requirement analysis, technical solution design, and product development.
2. Responsible for the on-site delivery management of industrial IoT projects, including on-site engineering design, network setup, system upgrades, equipment IoT integration and debugging, performance testing, and configuration of SaaS software functions on the cloud.
3. Conduct vibration analysis for rotating equipment using Vibration Analyzer. Analyse vibration data to identify potential issues and recommend appropriate corrective actions.
4. Communicate effectively with suppliers and customers regarding technical solutions.
5. Responsible for training and knowledge transfer to customers to ensure they can effectively use the PHM platform. Additionally, tasked with identifying new functional requirements from customers and providing feedback to product development for adjustments, maintenance, and optimization of existing features.

Requirements:-

1. Possess minimum 3 years of experiences in vibration condition monitoring-related fields, with familiarity in IoT, big data, artificial intelligence, cloud computing, and other industrial internet domains.
2. Experience in implementing vibration condition monitoring projects for industrial enterprises and system integration, with a background in rotating equipment diagnosis & maintenance, and industrial IoT project implementation.
3. Understanding of the IT/software integration industry, basic knowledge of IoT, and the product architecture of platform+SaaS applications.
4. Preferably have a Bachelor’s degree or above in engineering, with strong business communication and pre-sales solution development skills. Must have a self-driven business approach, be outgoing, diligent, and possess a rigorous professional demeanor.
5. Possess valid SG class-3 driving license

Job Responsibilities

• Prepares Primavera P6, to monitor the progress and substantiate time and cost entitlements.
• Prepares preliminary master schedule for pre-tender, tender and contract programmes.
• Prepares and maintains an intergrated schedule of drawings, procurement, construction, test & trials, integrated logistic plan using Primavera P6.
• Prepares baseline schedule which includes resource loading using Primavera P6.
• Identify descrepancies, delay and provide recovery schedule to Project Manager.
• Assist with the preparation of Extension of Time (EOT) claims, including presentations to clients.
• Prepares progress reports and progress audits, inclusing S-Curves, progress trackers and programming health checks.
• Prepares receovery programmes and presentations summarising key recovery strategies.
• Prepares detailed commissioning programmes
• Prepares baseline schedule which includes resource loading and cost loading.
• Provides advise on post-contract claims, reviews, disputes and litigation on programming.
• Any other ad-hoc duties as assigned by superior.

Job Requirements
• Degree in Civil Engineering or equivalent
• Min. 2 -3 years experience in the same field or equivalent
• Must have Primavera P6 Certificate
• Good team player and ability to work in a fast-paced environment
• Hands-on experience with Primavera for (2 to 4 years experience)

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are looking for a proactive Electronics Assistant Engineer with a diploma in Electronics or a related field to support our engineering team. This role involves assisting in the development, testing, and maintenance of electronic systems and components. The ideal candidate will have a solid understanding of electronics principles and a desire to learn and grow in a dynamic environment.

Be Part of Our Success

• Assist in the assembly, testing, and troubleshooting of electronic circuits and systems
• Support the design process by preparing prototypes and conducting tests
• Collaborate with senior engineers to gather requirements and assist in project development
• Document testing procedures, results, and modifications made during projects
• Proficient in technical documentation and reporting
• Help in the selection of electronic components and materials for projects
• Participate in maintaining laboratory equipment and ensuring safety standards are met
• Stay informed about new technologies and trends in electronics

Qualities We Value

• Diploma in Electronics Engineering, Electrical Engineering, or a related field
• Experience through internships or projects related to electronics is an advantage
• Basic understanding of circuit design and electronic components
• Familiarity with testing equipment such as oscilloscopes, multimeters, and function generators
• Understanding of programming basics (e.g., C, C++) for embedded systems
• Basic knowledge of CAD software for electronic design (e.g., Altium) is a plus
• Strong problem-solving skills and attention to detail
• Good communication skills and ability to work well in a team
• Willingness to learn and take on new challenges
• Singaporeans Only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working location is in Ang Mo Kio

Job Responsibilities: -

1. Supervise motor inspection and overhaul service work to ensure efficient and effective maintenance work, compliance with safety regulations and quality standards.

2. Conducting motor assembly, testing, and problem solving. Determine the motor status based on test results and issue motor test reports.

3. Improve work method, quality management systems, and workflow to enhance maintenance processes.

4. Provide technical support for motor pre/post-sales activities, including technical knowledge training for customers, ensuring customer satisfaction.

5. Develop and implement motor inspection, maintenance, and diagnostic plans for products, providing field technical guidance and process supervision.

6. Perform motor fault diagnosis, including vibration analysis, temperature monitoring, electrical testing, and insulation checks, etc.

7. Analyze and resolve motor-related problems to ensure optimal performance and reliability.

8. Train and upgrade the skills of workers in motor maintenance processes, including testing, assembly, insulation, repair, etc.

Requirements:-

1. Degree in Electrical Engineering or related field (preferred). Hands-on experiences in motor overhaul maintenance and technical support.
2. Possess years of experiences in motor repair and testing, diagnostics and troubleshooting.
3. Familiar with the maintenance, overhaul and testing of various high-voltage and low-voltage motors.
4. Preferably with class-3 driving license.

Job Duties

• Under broad direction, identifies user requirements and assists with the design, development and documentation of supply chain business processes.
• Assists in the development of user training and works with users to ensure that processes are correctly followed.
• Communicates with supply chain business units to ensure business needs are met.
• Is an advocate to the business unit and user community.
• Coodinates and conducts user training.
• Assists in supervising others. Provides basic job training and guidance on a regular basis; performs work of same or closely allied nature.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.

Requirement

Skills are typically acquired through completion of an undergraduate degree in a Technical, Supply Chain, or Business related field and 4-10 years of experience in a supply chain related field. Should have direct experience in and extensive knowledge of supply chain business processes and process management techniques.

Job Description:

As a Project Engineer specializing in structural steel construction, you will play a pivotal role in the planning, execution, and completion of our projects. Working closely with our project managers, you will oversee all aspects of construction, ensuring adherence to timelines, budgets, and quality standards. This is an excellent opportunity for a talented individual to make a significant impact in the dynamic field of construction engineering.

Key Responsibilities:

• Collaborate with project managers to develop project plans, schedules, and budgets for structural steel construction projects.
• Conduct thorough site assessments and surveys to identify potential challenges and ensure compliance with regulatory requirements.
• Coordinate with architects, engineers, subcontractors, and suppliers to facilitate the timely procurement of materials and resources.
• Manage day-to-day construction activities, including site logistics, safety protocols, and quality control measures.
• Monitor project progress and performance, identifying and addressing deviations from plans and specifications.
• Provide technical expertise and problem-solving support to resolve construction-related issues effectively.
• Prepare and review engineering drawings, specifications, and documentation to ensure accuracy and completeness.
• Foster a culture of teamwork, innovation, and continuous improvement among project team members.

Qualifications:

• Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.
• Minimum of 2 years of experience in project engineering, preferably in the structural steel construction industry.
• Proficiency in Tekla software.
• Strong understanding of construction principles, practices, and techniques.
• Excellent communication, leadership, and interpersonal skills.
• Ability to manage multiple priorities in a fast-paced environment.
• Familiarity with Singapore building codes, regulations, and industry standards.
• Immediate availability will be preferred

Job Descriptions

• Thoroughly review and understand bidding employer’s requirement documents, project specifications, and process data.
• Translate employer requirements into effective contractor solutions that align with project goals.
• Propose T&I proposal and support project execution.
• Assign work to In-House design team. Timely provide technical proposal or solution to project operation team.
• Liaise and communicate with project stakeholder for technical clarification and conclusion.
• Technical support for SFE Vessel operation and maintenance.
• Support engineering budget (estimation) and cost control.

Requirements

• Bachelor Degree in Civil Engineering / Naval Architect
• Min 10 years of related working experiences in offshore structure design and installation such as offshore platform, jacket and foundation.
• Preferably have experience with Wind Farm T&I.
• Familiar with offshore industrial standards and codes.
• Familiar with engineering design tools and software.
• Able to work in a team.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate must possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum 3-5 years of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Basic Qualities Required:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter