Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with the Contractors of the IWMF and also TWRP.

• With a focus on inter-disciplinary construction management, assist the CRE to coordinate the existing team of discipline Lead Resident Engineers as required, including liaison with our in-house Engineering Design Manager (EDM) on any outstanding design issues that may affect immediate construction activities.

• Lead and coordinate the construction work interface between IWMF contractors and TWRP contractors works and tie-ins etc and in particular with counterpart Interface Manager from TWRP.

• Lead and set up interface meetings between the various Contractors to drive the Contractors to resolve their coordination and tie-in point issues.

• Coordinate with BIM Manager and set up interface BIM walk through sessions as required with the Contractors.

• Project delivery planning updates for the interfacing/tie-in points from the IWMF/TWRP Contractors with a specific focus on MEICA issues given the stage of the project.

• Coordinate and expedite internally on urgent RFA/RFI submissions with regards to interfacing matters, in particular between EPC1 and EPC2 but also with IWMF and TWRP.

• Attend other site meetings as required by CRE and coordinate internally to resolve technical issues with the Contractors with regards to interfacing matters with a specific focus on MEICA issues given the stage of the project.

• Attend and follow-up on interface/coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, interface meetings with TWRP, etc and as required for the coordinated completion of the Works under each contract as they lead into the Testing and Commissioning phase of the project.

Requirements:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

We are seeking a motivated Assistant Engineer (Sales & Marketing Support) to join our dynamic team! This role will serve as a bridge between our engineering, sales, and marketing teams, ensuring seamless communication and support. The ideal candidate will bring a combination of technical expertise and customer-oriented skills to assist in delivering exceptional service to our clients.

Job Scope:

Technical Support for Sales Team:

• Provide technical assistance and product knowledge to the sales team during customer meetings, presentations, and calls.
• Prepare technical documentation, product specifications, and comparison reports for sales presentations.

Customer Interaction & Troubleshooting:

• Assist in addressing technical inquiries from clients and help troubleshoot product-related issues.
• Participate in customer meetings to explain technical aspects of UF membranes and their applications.

Project Support:

• Collaborate with the sales team to support technical aspects of client projects, including sizing and selecting appropriate UF membrane products for specific applications.
• Monitor project timelines and provide updates to the sales team to ensure smooth coordination with customers.

Market Research & Product Development Input:

• Conduct market research to understand customer needs, competitor products, and industry trends.
• Provide feedback to the R&D and production teams regarding potential improvements or modifications to the UF membrane products based on customer feedback and market demand.

Training & Product Demonstrations:

• Organize and conduct product training sessions for the sales team, distributors, and customers.
• Assist in product demonstrations and pilot installations for potential clients to showcase membrane performance.

Documentation & Reporting:

• Maintain detailed documentation of customer interactions, technical issues, and solutions provided.
• Prepare regular reports on customer feedback, product performance, and sales support activities.

Collaboration with Marketing Team:

• Work closely with the marketing team to develop technical content for brochures, presentations, and marketing materials.
• Assist in planning and executing marketing events, such as exhibitions, webinars, and customer workshops.

Qualifications:

Educational Background:

• Bachelor’s degree in Engineering (Chemical, Environmental, Mechanical, or related field).
• Knowledge of water treatment or membrane technology is a plus.

Technical Knowledge:

• Ability to read technical drawings and understand product specifications.
• Familiar with AutoCAD or Solidworks
• Programming and Data analysis will be a plus

Communication Skills:

• Strong verbal and written communication skills.
• Ability to explain technical concepts to non-technical audiences and prepare technical reports.

Problem-Solving & Collaboration:

• Good analytical skills to troubleshoot and address customer needs.
• Team player with the ability to work across different departments.

Responsibilities:

• Work closely with customer and internal team during new product introduction to deliver design project
• Coordinate with factory to ensure timely delivery of prototypes during sample builds
• Facilitate DFM activities during development to ensure product is manufacturable
• BOM creation and Maintenance in SAP system (Part addition, BOM Upload, BOM Change)
• Handover of project to factory for mass production

Requirements:

• At least 3 years of working experience in electronics manufacturing environment
• At least a Bachelor’s degree in Engineering
• Good understanding of electronics manufacturing process
• Experience in project / product management
• Fluent in verbal and written communication

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

The Asia Pacific (AP) Team is delivering innovative energy solutions to the world and seeking a motivated Principal Applications Engineer (PAE) to join our exciting Oil and Gas Business Development team.

As a PAE, you are responsible for directing the Company's internal activities associated with supporting the sale of new turbo-machinery packages for the Oil and Gas market across the Asia Pacific region.

You collaborate closely with Field Sales and a wide cross section of other departments to plan, develop, and execute technical and commercial strategies necessary to successfully compete for new equipment business.

Specific responsibilities include the review of customer specifications, selection and optimization of Solar's turbo-machinery equipment offering, pricing custom features, coordination of Construction Services and Customer Services scope, and proposal preparation.

We are looking for a passionate contributor who can move the needle to win business with the Sales team and a strong desire to advance into an international field sales position in the future.

Nature and Scope:

• Provide product and application expertise to the global field sales teams and customers.
• Develop solutions to technical problems involving other Solar organizations such as Engineering, Project Management, and Quality as well as external suppliers and customers in the resolution of specific issues.
• Apply state-of-the-art tools for producing data that describes the selected equipment.
• Consult with Sales on Solar’s solution capabilities to improve the competitiveness of Solar’s offering.
• May assist Sales in difficult or complex customer negotiations as well as in the implementation of complex projects.
• Identify creative solutions to manage Solar’s risks associated with projects.
• Is responsible for not only identifying and managing critical issues but also for bringing them to an agreeable conclusion.
• Participate in the discussion of the philosophy, design, and application of package features and alternatives.
• Continually increase product and process knowledge in order to perform duties more effectively.
• Improve knowledge of the performance capabilities and limitations of Solar’s entire product line, as well as knowledge of sales strategy, economics, competitor capabilities, and customers.

Principal Accountabilities:

• Provide timely and accurate support to Field Sales personnel to assist in the capture of new equipment sales.
• Assist in the preparation of proposals by reviewing customer specifications, developing corresponding technical comments/exceptions and developing Applications Check-sheets (ACS) with accurate custom feature pricing.
• Select the optimum equipment configuration to competitively satisfy the customer’s needs.
• Devise alternative innovative approaches to customer applications when standard equipment cannot be utilized.
• Ensure commercial and technical risks are effectively managed during proposal preparation and specification reviews.
• Defend Solar’s standard product design in customer negotiations. Using your relationship-building skills, influence customers decisions towards Solar’s solution.
• Upon a successful order, hand the project over to Business Management, and Project Engineering, with complete technical and commercial definition but also critical commercial and technical issues so that it can be executed efficiently.
• Coordinate and assign tasks to other company departments and groups as part of the response coordination in support of customer inquiry activity.
• Define projects accurately to ensure margin erosion is minimized through shipment.
• Continue to expand product knowledge. Utilize PAE tools to generate proposals, custom features and ACS’s.
• Responsible for several relatively difficult inquiries. Spend considerable time in customer meetings and negotiations.

Environment:

• Occasionally collaborate with teams in the USA requiring a flexible work schedule.
• Travel is required within the Asia Pacific region.
• Function in multicultural environments, collaborating with other professionals to prepare technical and commercial proposals and coordinate contract details as well as to respond to unique project conditions/demands.
• Deal with dynamic, fast paced, ever shifting conditions and challenges against competition and demanding customers.

Minimum Qualifications:

• Bachelor of Science degree in Mechanical, Electrical Engineering or equivalent, and at least three years of experience in related engineering assignments, preferably with turbomachinery applications.
• Must demonstrate general knowledge of turbomachinery principles and theory, mechanical and electrical engineering and applications related to our business.
• Knowledge of Solar’s policies, products and processes, and a familiarity with Solar’s markets and industry standards.
• Moderate Solar and/or marketplace experience is required, including the engineering and operation of the equipment along with potential impact to customers.
• Demonstrated cross functional leadership; in order to identify and secure resources necessary to prepare proposals, deliver on commitments
• Strong negotiation and influencing skills; Able to effectively influence a variety of business partners, peers and customers.
• Must demonstrate the ability to interface cross culturally as well as cross functionally.
• Self-driven, motivated, ability to work independently.
• High level of emotional intelligence
• Candidates must have a desire to move into a field sales position and demonstrate the basic capability to execute this career progression in the future.

Position Overview

Science Centre Singapore is dedicated to the promotion of interest, learning and creativity in science & technology through imaginative and enjoyable experiences, and to contribute to the nation's development of its human resource.

Join the Exhibitions team and create memorable experience as an Assistant Experience Engineer.

Essential Job Functions

As an Assistant Experience Engineer, you play a pivotal role in developing exhibits and experience, ensuring they operate at the highest level for the enjoyable experience for our guests. Your responsibilities include the following:

- Exhibit checks, reporting, troubleshooting and maintenance of exhibits/exhibitions

- Carry out periodic image back-ups of our exhibits, maintaining the exhibition network and administration of the team’s knowledge management database (storage FTP server)

- Set-up and takedown of Exhibitions

- Exhibit Ideation and Prototyping

- Work on Exhibit Specifications (including providing technical advice for development projects)

Requirements

Knowledge and work experience in the following areas will be an advantage.

Diploma in Industrial Design/Product Design

· Machining, mechanical assembly works, electrical and electronic systems, digital prototyping using CAD (computer-aided Design) software.

· Rapid prototyping, addictive and subtractive fabrication of spare parts and components for exhibits, exhibit housing and experiences.

· Operating woodworking machines such as, the bench saw, planer, routers and stand drill.

· Wood/plastics fabrication works

Diploma in Information Technology or equivalent

· Familiarity with troubleshooting basic computer hardware faults, diagnose software issues within an exhibit and resolve them

Other Skills/Abilities

Having a strong interest in taking apart or fixing things, coupled with the ability to handle basic equipment and tools useful in carrying out the duties within the galleries.

We value qualities such as professionalism, initiative, and quality service in all aspects of interaction with both internal and external customers, collaborative and enthusiastic about learning and acquiring new skills.

Shift Requirements

Rotating 5-day work shifts is a requirement, while duties on weekends and public holidays will be scheduled as and when required.

Only shortlisted candidates will be notified.

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Develop & implement Project Quality Plan, all QA/QC inspection and testing, as required by contract specifications and by regulatory requirements;
• Lead and manage the QA/QC team in the various disciplines including but not limited to qualified welding and fabrication inspection.
• Oversee preparation of Welding Procedure Specification, Welder Qualification Record and Quality Procedures;
• Ensure compliance to the overall Quality Management System, policies and standards
• Develop and implement preventive measure and corrective actions for non-conforming products include training to ensure awareness of quality procedures and specific responsibilities in the QA/QC process.
• Able to audit QA/QC activities of the staff and sub-contractors to assess conformance with the QA/QC procedures.
• Liaise and attend with consultants and subcontractors for QAQC activities
• Carry out inspections to in-progress / completed works and ensure Works are in accordance to project specification.
• Raise report of any non-conformances and carry out root cause analysis.
• Monitor corrective actions and process improvement.
• Manage subcontractors to clear defects
• Document QAQC records and prepare handover documents.

Requirements:

• Degree in Mechanical Engineering or equivalent
• Minimum 8 years of relevant experience in the setting up, day to day management, testing and inspecting, auditing and reporting of all aspects of the QA/QC of similar major projects in the waste, oil and gas, water or petrochem industries.
• Good Organizational and planning skill.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

Join GSK Process Technician Apprentice Programme – Singapore - 2025: Help us get ahead of disease together

GSK Apprenticeships are full-time entry level opportunities that offer ITE graduates the opportunity to begin their career while studying towards a Work-Study Diploma in Chemical Process Technology fully funded by GSK.

Prior Education requirements: Nitec in Chemical Process Technology (GPA>2.0) OR Higher NITEC in Chemical Technology OR Higher NITEC in Biotechnology, Fresh ITE graduates within 5 years of graduation or ORD.

Language requirement: Written and spoken fluency in English

Other requirements:

• If offered a position the candidate must be willing to enroll, and meet entry requirements, with the partnering educational institution, in the preferred related instruction course
• Must be able to commute daily to the GSK manufacturing facility and to the education institution when required for classes

Start date: January 2025

Application deadline: We recommend you apply as soon as possible. We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

Are you looking to gain a head start in your career where you can help positively impact the health of billions of people? Apply for the Process Technician Apprentice Programme today!

We are looking for highly motivated ITE graduates with an interest in science and engineering who are looking to kickstart their career in the pharmaceutical industry. The apprenticeship programme allows you to develop hands-on technical skills while continuing your education.

Working at our pharmaceutical manufacturing site, you will help to ensure we have the latest, safe, efficient, and reliable processes and equipment to deliver life-saving medicines and vaccines to people in 90 % of the world’s countries. This role will enable you to develop your skills in an industry that’s making radical changes to the way it develops and manufactures products.

Ahead together with tailored training and career development

This entry-level development opportunity offers you the chance to study towards nationally recognized qualifications while gaining hands-on, paid on-the-job training. Our apprentices will take up studies towards a Work-Study Diploma in Chemical Process Technology while working at a GSK Pharmaceutical Manufacturing facility in Singapore.

You will spend time working in our manufacturing facility learning how to operate and maintain the different equipment and utility systems that support our pharmaceutical production from our in-house industry experts . You will learn safety and risk management to ensure all equipment is operated safely and efficiently.  Over the 30 months of the apprenticeship, you will have a personal training programme to help you develop and progress.

What will you do?

As a process technician apprentice, you may get involved in the following activities:

• Learning how to operate equipment in the manufacture and packaging of our pharmaceutical products
• Supporting the operation of solvent recovery and effluent treatment processes that support manufacturing processes
• Supporting routine preventive maintenance activities
• Get involved in project activities
• First touch engineering - root cause analysis and solving breakdowns
• Data collection, analysis and trending to identify improvement opportunities and implementation of change
• Assisting in new product and equipment introductions
• Ensuring quality, safety and accuracy in all that we do

What do we offer you?

• A competitive salary
• An annual bonus based on company performance
• Access to healthcare and well-being programs
• Employee recognition programmes, which reward exceptional achievements
• On-the-job experience and formal and informal training and development, delivered through a mixture of coaching, mentoring and formal training programmes
• Fully funded next level education!

Apply now: https://jobs.gsk.com/en-gb/jobs/402355?lang=en-us&previousLocale=en-GB

We want GSK to be a workplace where everyone can feel a sense of belonging and thrive as set out in our Equal and Inclusive Treatment of Employees policy. We’re committed to being more proactive at all levels so that our workforce reflects the communities we work and hire in, and our GSK leadership reflects our GSK workforce.

Need help with your application?

Please email us at [email protected] and let us know how we can help you.

#ApprenticeSG

#ManufacturingApprenticeSG

Job scope –

- Provide guidance to process technicians on key parameters, plant operating instructions, equipment preparation for maintenance, process troubleshooting, operating plans, and safety concerns.

- Supports process control and data systems such as distributed control system (DCS) and plant information monitoring system.

- Conduct process evaluations, technical feasibility studies, process trend analysis, and provide technical leadership for the continued operation of the facility.

- Support the Commissioning Team during plant start-up, performance test, optimization and prepare documentation.

- Prepare and review Standard Operating Procedure, PFDs, P&IDs, material, quantity, heat and mass balances, utility and consumable balances, and technical data sheets for major equipment items.

- Provide the required technical support as technical lead in the plant reliability and productivity improvement projects.

- Liaising with the operation team in the control room on a daily basis.

- Ensure safety at the sites through compliance to safe operations and practices at all times.

- Liaise with authorities with regards to all matters with proper documentation.

Requirement

- Minimum Bachelor Degree in chemical engineering or petrochemical engineering.

- 2 years’ working experience in a petrochemical plant or oil refinery is an advantage.

- Strong knowledge of chemical process, and chemical process safety handling.

- Good interpersonal and communication skills, excellent spoken and written skills.

- Exceptional problem solving and analytical skills.

- Basic knowledge of AutoCAD and any other CAD design software is desirable.

- Able to work independently and a multitasker.

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with resource planning and budget milestones.
• Perform site study for PV system recommendations.
• Manage site team for safety compliance.
• Monitor project progress for specification, schedule, and budget alignment.
• Plan and prepare Bill of Materials (BOM).
• Coordinate with procurement for timely material delivery.
• Create checklists for solar project inspections.
• Investigate and troubleshoot M&E issues with stakeholders.
• Assist LEW with site testing and inspections.
• Design electrical and mechanical drawings using AutoCAD.
• Requirements:.ubmit project documents for authorities.

Requirements:

• Diploma in Mechanica/Electrical Engineering, or equivalents.
• Knowledge of AutoCAD, Solidworks, or modeling software (e.g., SketchUp, PVsyst, Helioscope) is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• To Project Management Coordinate with main-con & consultant for drawing submission, material sample submission & meeting with main-con and consultant.
• Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptacle layout, single line diagrams, CCTV, data Tel com operational routing diagram, and ELV systems. control schematic and wiring diagrams.
• Identify discrepancies in tender/contract / IFC drawings and raise queries for clarification, A&A (R&R) + Constriction Filed.
• Attend all operational matters related to the daily running of the project & Handle multiple projects simultaneously.
• Testing & commissioning for Electrical apparatus.
• QA/QC documentation review of engineering deliverables.
• LV & HV cables sizing calculation & prepare bill of material.
• Planning workforce arrangement & supervision & working planning.
• Giving progress reports regularly to teams & monitor project schedules.
• Prepare Electrical shop & As-builts SLD Rcp drawing

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Salary: $3500 - $5000 (basic), travelling allowances
• Overtime claimable, Performance bonus
• Degree holders with no experience can apply
• On-the-job training is provided
• Good working environment
• Career advancement

Main purpose of the job

To perform repair, inspect and commission Company’s System (cranes, drilling systems, pipe-lay systems etc.) at the client’s premises or at the Company under supervision of an experienced service engineer

Responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1 year of relevant experience as Service Engineer in Oil & Gas/Marine industry
• Candidates with no experience can apply as on-the-job training is provided
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily and work overtime
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your resume to [email protected]

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical & Electronic or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

Key Responsibilities:

• Develop and implement improvement process to streamline internal operations and enhance production efficiency to achieve cost effectiveness.
• Collaborate with various production teams to minimize manufacturing errors, reduce waste, and prevent product defects, thereby improving overall product quality.
• Design and oversee operation mechanisms to ensure optimal production efficiency and smooth workflow.
• Generate innovative solutions to improve process capability, increase throughput, and eliminate bottlenecks.
• Define parameters and lead the digitalization of productivity data, with a focus on integrating IoT between equipment and dashboards.
• Investigate and resolve quality issues, both internal and external, to ensure compliance with regulatory and company standards.
• Lead and contribute to various ad-hoc projects, offering technical expertise to support cross-functional teams.
• Proactively monitor, identify, design and refinement of Standard Operating Procedure and improvement in processes.
• Support and participate in company continuous improvement program.

Job Requirements:

• Minimum Degree in Engineering (Industrial, Mechanical, Electrical, Chemical, Process, Precision, etc.), Computer Science, or other relevant discipline is required.
• Preferably with at least 2 years of experience in a manufacturing environment.
• Strong academic performance are welcome to apply and will be considered for a Management Trainee role.
• Proficiency in statistical software is advantageous.
• Familiarity with production control, quality management systems, data analysis, and statistical process control is preferred.
• Strong analytical and communication skills are essential.
• Self-motivated and capable of thriving in a team-oriented environment.
• Must demonstrate a “willingness and curiosity to learn,” as training will be provided.

We regret that only shortlisted applicants will be notified.

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

• Provides technical and engineering leadership, and supports the development of new technologies within a local laboratory and potentially across the Element enterprise
• Provides counsel to coworkers and customers requiring critical analysis of data
• Is able to exchange technical information and knowledge with peers, senior colleagues and specialists across the element enterprise
• Actively seeks ways to disseminate critical testing knowledge, acumen and protocols throughout Element
• Is accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Is able to oversee and guide problem solving of complicated technical challenges
• Provides input and support on business development opportunities with new or existing customers
• Confident making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assists in the professional development of novice technicians and engineers within the local laboratory
• Carries out crucial examination and implementation of testing concepts and data
• Utilizes an assortment of skill, methods, procedures and materials in advanced testing analysis
• Adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

* Responsible for achieving sales targets and providing technical support to our customers.

Requirements :

* Diploma or ITC / NTC2 in Mechanical / Electrical or Marine Engineering

* Entry-Level graduates may apply

* Sales and product training will be provided

* Excellent interpersonal, communication & negotiation skills

* Must possess Class 3 licence and own a car

Job Responsibilities and Duties

• Project management and daily operations including inspections, handover and site measurements.
• Prepare submission of shop drawing, method of statement, progress claims and project management reports
• Supervise and monitor projects are carried out in accordance to company's operating procedures, quality standards and contractual specifications
• Ensure environmental, safety and health practices are carried out at all times

Requirements (Qualification & Experience)

• Candidate must possess at least a Diploma/ Bachelor's degree in Civil Engineering or its equivalent
• Positive attitude, including being self-motivated, responsible and taking ownership of work
• Minimum 5 years' of working experience in Construction industry will be an added advantage
• Strong analytical and communication skills

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.