• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Position: Senior Software Engineer
Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$6,500 – $8,000

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Scope:

Software Development

• Design, Develop and Maintain device drivers for Windows Operating Systems
• Undertake WHQL testing and certification of drivers and device frameworks.
• Design, Develop and Maintain User Libraries and DLLs.
• Participate in all phases of SDLC and prepare corresponding documentation
• Undertake porting and maintenance of existing drivers to new frameworks and OS’s
• Resolve defects reported by internal and external customers
• Collaborate with USB host & device firmware development teams.

Job Requirement:

• Degree/Master’s in computer science/Engineering or related field.
• 5 years or above experience in the area of device drivers development, preferably USB
• In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs
• Excellent C Programming Skills.
• Professional attitude to work and meticulous in coding and testing
• Must have participated and experienced in SQA processes.

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

• MNC (Woodlands)
• Company Transport Provided
• Basic: $1700 to $2100 + AWS + VB (3 to 4 months)
• Excellent Benefits + Career Progression
• Training Provided for candidate without or with lesser experience

Job Responsibilities:

• General maintenance, equipment repair and overhaul plant equipment / instrument.
• Carry out minor fabrication work (piping, support system, vessel, electrical supply, lighting system).
• Maintain good housekeeping and 5S in the work area.
• Assist in plant troubleshooting job.
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.
• Operate processes in accordance to operating procedures, process safety information (where applicable) and safe work practices.
• Participate in relevant safety and health programs, trainings and initiatives.
• Report on safety and health incidents and accidents.
• Any assigned ad-hop task/s.

Requirements:

• Preferably 2 to 3 years’ experience in a process manufacturing environment.
• Basic Education Requirements: Minimum NTC-3 in Welding/Maintenance Fitting or Electrical fitting and Installation or other relevant technical certificate.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As an Associate Process Engineer, you will work on monitoring and sustaining process / SPC to ensure quality of products are meeting specification.

Your Job:

• Analyze SPC charts using SPACE
• Respond to all PR rules and follow CAS correctly.
• Work on basic annotation and achieve quality troubleshooting rate for SPC OOC points.
• Monitor all qualified processes using SPC and other statistical tools.
• Perform shift duties (12-hours shift) to support the running of production in the Module and ensure that integrity of the tools is in place to run the process.
• Assist Engineers in the qualification and fine tune of new processes and new equipment for production.
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements, and programs

Required Qualifications:

• Diploma in any Engineering streams
• Experience in wokring with Electronics / Manufacturing sectors
• 1-2 years of experience in working with SPC tools
• Good understanding of the SPACE
• Willingness to work in weekend / rotational shifts

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Intro to GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Introduction:

We are expanding our Fab Operations and are looking for Process Engineers, in this role you will sustain and improve process / SPC to meet quality, cost, productivity requirements. Process improvement to eliminate inherent process weakness to achieve company goals.

Your Job:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance.
• Do proper annotation to maintain quality troubleshooting rate for SPC OOC.
• Understand Cp and Cpk indices.
• Monitor critical SPC charts daily.
• Perform process window study and provide improvement plan to reduce OOC and improve CPK.
• Review ESPC charts using SPACE.
• Know all the rules for ESPC.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Raise PCRB and understand the requirement for PCRB opening, follow through with qual plan, analyze data using required software and CR closure.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues.
• Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline.
• Work closely with Equipment Engineer on new equipment acceptance.

Required Qualifications:

• Degree in electrical / electronic / Mechanical / Microelectronics / Chemical process Engineering / Chemistry / Physics
• 2 years of working experience in electrical / electronics industry
• Team Player
• Good ownership and accountability
• Good verbal and written communication skills
• Flexible and able to support overtime
• Self motivated, meticulous, and discipline
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Responsibilities:

• Developing and optimizing processes, including production flow, assembly methods, and equipment
• Ensuring efficient and profitable manufacturing processes
• Carrying out risk assessments of all equipment and processes
• Writing reports based on data collected and presenting findings to higher-ups
• Coordinating manufacturing launch of new or revised products
• Help with change control, test script writing

Requirements:

• Min Degree in related study
• 1-2years experience in Pharma engineering

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Esther Lim Suk Hui

EA Personnel No: R18728082

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

This role is responsible for one of the front-end process modules in Office Printhead or PageWide Printbar manufacturing lines and required to apply subject matter knowledge to drive technical and operational excellence in the manufacturing processes. Expected also to work on problems of diverse complexity and scope.

May participate in project team activities and facilitates information validation and team decision making process. Exercises independent judgment within generally defined policies and practices to identify and select a solution. Ability to handle most unique situations. May seek advice in order to make decisions on complex business issues.

Responsibilities

• Designs engineering solutions, including methods, operation sequences, and processes for the manufacturing of parts, component sub- assemblies, and final assemblies, based on established engineering principles and in accordance with general specifications and requirements.
• Lead issue diagnosis and problem-solving, using a systematic problem solving approach.
• Work in a project team of other manufacturing engineers and internal and outsourced manufacturing partners to develop and execute reliable, cost effective and high quality manufacturing solutions for moderately-complex products from new- product introduction through end of lifecycle.
• Delivers professionally written reports, and supports realization of operational and strategic plans.
• Collaborates and communicates with management, internal and external partners in outsourced manufacturing or development r regarding process and standards compliance, recording and reporting issues, and recommendations for problem resolution for manufacture of existing products.
• Represents the manufacturing engineering team for all phases of larger and more- complex development and manufacturing projects.

Education & Experience Recommended
• Bachelor’s or Master’s degree in Manufacturing engineering, Mechanical Engineering, or any other manufacturing related discipline
• Typically has 2-4 years of work experience, preferably in product/process engineering, or a related field or an advanced degree with 0-2 years of work experience.

Knowledge & Skills

• Using engineering tools and software packages to design and automate manufacturing processes.
• Strong analytical and problem-solving skills.
• Competent in adopting manufacturing methodologies such as Lean Manufacturing, Continuous Improvement etc.
• Understanding of material properties and hardware and electrical component design.
• Using empirical analysis, modeling and methodologies to validate manufacturing process and tooling design and specifications.
• Proficient in English. Good written and verbal communication skills.
• Ability to effectively communicate ideas to stakeholders
• Competency in Industry 4.0 technologies/Digitalization/Data Analytics is a plus.

Impact & Scope
• Impacts immediate team and acts as an informed team member providing analysis of information and limited project direction input.

Complexity
• Responds to routine issues within established guidelines.

Disclaimer
• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our PHOTO Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

• Analyze drawings to assess product characteristics, special handling needs, and determine appropriate packaging and crating requirements.
• Manage multiple projects effectively with minimal guidance or supervision.
• Identify opportunities for packaging improvements and implement solutions.
• Provide support for on-site packing activities as needed.
• Perform other ad-hoc tasks as assigned.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Work with both R&D and Operation Managers to kick off improvement projects that aims at cost reduction, yield improvement, Human Resource Management (work along with HR), etc.
• Implement Lean manufacturing principles and best practices to drive process improvements across all production lines
• Develop Production standard procedure or Work Instructions and align these documents with quality management systems requirements
• Prepare and conduct training for Operation teams to ensure up-to-date compliances are practiced consistently
• Identify opportunities for process optimization and implement strategies to improve productivity and efficiency
• Collaborate with the R&D team to introduce new technologies and innovations to our manufacturing process
• Report monthly CI & other assigned KPI performance
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s Degree in Mechanical/Industrial Engineering, with minimum 1 year working experience in manufacturing environment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Lead and manage a team of RPA developers and analysts to delivery end-to-end automation
• Analyse business processes and identify opportunities for automation
• Design, develop, test, deploy and maintain RPA solutions according to best practices
• Work closely with stakeholders to understand their needs and ensure successful project delivery
• Contribute to the governance and best practices of RPA engagements within the Center of Excellence (COE)
• Liaise with cross-functional teams, such as cyber security, Active Directory (AD), AWS etc. to address any roadblocks and ensure smooth project execution
• Train and mentor business users on RPA capabilities
• Manage client relationships and demonstrate the value of automation through workshops and demos
• Create and maintain project documentation, including process design documentations (PDDs), solution design documents (SDDs), and technical design documents (TDDs)
• Continuously improve RPA processes for increased efficiency and scalability

Requirements

• Degree holder
• At least 5 consecutive years in roles of similar capacity
• Good technical writing skills
• Familiar with incident, problem and change management processes
• An eye for automation opportunities
• Passionate about mentoring team

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Job scope:

• Monitor, analyze and make decisions on how to address MTBE (Metrology and Backend) tools that are out of control for established SPC rules for both process and defect related issues.
• Use SOP to dispose of products that were out of control for established SPC rules for both process and defect related issues.
• Perform daily compilation of presentation materials on daily process and tools issues and present in Passdown meeting
• Carry out and complete process engineering tasks assigned by process engineers which directly contributed to process improvement and flexibility improvement.
• Required to perform basic metrology tool tuning.
• May be required to perform equipment recipe creation.
• Take the initiative to assume added responsibilities.

Requirements:

• Working hours: 8.30am to 6pm (Mon to Fri)
• Understanding of SPC and its applications in semiconductor equipment and processes.
• Direct experience in metrology (Defectivity/Thickness/Geometry), Sorting and packaging, and Characterization lab are plus points.
• Excellent verbal and written communication, good PC skills, presentation skills and strong data collection and analysis skills.
• Willing to work any shift and that you be a behavioral example by being a proactive problem solver, communicating openly, and taking responsibility.
• Possess good teamwork, multi-tasking capabilities and project leading skills.
• Self-motivated
• Ability to troubleshoot problems and address root causes
• Team oriented with a strong focus on effective team dynamics

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Responsibilities:

• Developing and optimizing processes, including production flow, assembly methods, and equipment
• Ensuring efficient and profitable manufacturing processes
• Carrying out risk assessments of all equipment and processes
• Writing reports based on data collected and presenting findings to higher-ups
• Coordinating manufacturing launch of new or revised products
• Help with change control, test script writing

Requirements:

• Min Degree in related study
• 1-2years experience in Pharma engineering

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Esther Lim Suk Hui

EA Personnel No: R18728082

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

You will be part of our Process + Systems team adding your expertise + skills to the delivery of customer + operational excellence.

WHAT WILL YOU BE DOING ON A DAILY BASIS?

Your primary objective is to manage + execute all the related activities of process analysis, project management, supporting with documentation + business process modeling in compliance with company standards.

• To provide guidance and enforcement to countries on adopting and executing all globally aligned processes and procedures.
• To participate in strategic projects with management to drive operational excellence organization.
• To drive process improvement, process re-engineering + support the implementation of changed processes.
• To collaborate with other corporate functions to ensure business needs are identified + translated into technical solutions.
• To support the implementation of best practices + methodologies to the major organization stakeholders.
• To support + coordinate near shoring activities to the global shared service centers
• To drive OPEX reductions through adoption of e-solutions, standard processes and compliant tasks allocation.
• To identify knowledge gaps with countries and collaborate with corporate functions to ensure same are closed

Location: Singapore

Employment Type: Full-Time

Job Overview:

We are seeking a motivated Associate Consultant specializing in Business Process Re-Engineering (BPR) to optimize and redesign business processes for improved efficiency. This role involves evaluating workflows, recommending improvements, and supporting implementation efforts.

Roles and Responsibilities:

• Conduct comprehensive process analysis to identify inefficiencies.
• Gather, document, and evaluate business process requirements.
• Assist in designing and implementing streamlined workflows.
• Collaborate with stakeholders to define key performance indicators (KPIs).
• Support the development of process documentation, including SOPs and process flow diagrams.
• Monitor project progress and ensure adherence to timelines and goals.
• Facilitate change management initiatives for process improvement.
• Prepare reports and presentations for management review.

Qualifications and Skills:

• Bachelor’s degree in Business, IT, or a related field.
• Strong analytical and critical-thinking skills.
• Proficiency in process mapping tools and business analysis methodologies.
• Excellent communication and stakeholder management skills.
• Minimum Experience: 3+ years

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

Our large-scale Food Science program, ‘Proteins4Singapore,’ funded by Singapore’s National Research Foundation (NRF), is a collaborative effort between the Technical University Munich (TUM), Nanyang Technological University (NTU), the Singapore Institute of Technology (SIT), and A*STAR’s Singapore Institute of Food and Biotechnology Innovation (SIFBI). As part of the Proteins4Singapore team, you will work alongside renowned scientists in plant and food technology, food chemistry, materials science, and business sustainability. Through interdisciplinary collaboration, the program aims to develop state-of-the-art methods and techniques to ensure a sustainable protein supply for highly urbanized environments.

Please visit www.tum-create.edu.sg for more information about TUMCREATE.

Job Summary

We are seeking a highly motivated and skilled Research Fellow to join our dynamic research team focusing on designing, adapting, and implementing cutting-edge mechanical and electronic systems for a decentralized food manufacturing model. As part of the Proteins4Singapore project, this role involves on utilizing simulations and advanced control systems to optimize and ensure quality in novel food textures and forms. This position plays a critical role in advancing sustainable protein solutions for urban environments through interdisciplinary collaboration, drawing expertise from mechanical engineering, mechatronics, and food engineering. This is a 1-year contract with the possibility of extension after the first year.

Key Responsibilities

• Develop a closed-loop control system to synchronize high-moisture extrusion and shape manipulator systems with a seamless integration and quality assurance.
• Integrate a variety of non-invasive sensors for a continuous and active monitoring on a food shape manipulator system.
• Develop and adapt custom firmware to integrate extrusion, in-line monitoring and control system with software protocols.
• Work closely with interdisciplinary teams to combine multiscale structural analysis with food processing methods, such as 3D printing and extrusion, supporting the project’s overarching goals of promoting sustainable food technologies and creating novel approaches for analyzing food texture.
• Engage in collaborative research, data analysis, and interpretation, while contributing to the writing of research papers, reports, and presentations for dissemination at conferences and in peer-reviewed journals.
• Participate in lab meetings, seminars, and collaborative research discussions to align with project goals and objectives.
• Supervise junior group members including undergraduate and doctoral students.

Key Competencies

• Proficient in firmware and software development, with experience in real-time systems, control algorithms, and open-source platforms.
• Strong background of at least 3 years in mechatronics, electronic systems, and automation; ideally experience with CFD, FEM simulations, and rheology for material flow analysis.
• Experience with food processing technologies, particularly food-grade and semi-solid materials, and a focus on safety and user-centric design.
• Publication as key author in related journals.
• Excellent communication skills, both written and verbal, in particular communication of complex scientific concepts to both specialists and non-specialists in a multidisciplinary research environment.
• Proven ability to conduct independent research and collaborate in multidisciplinary teams including working effectively within deadlines.
• Self-motivated and adaptable, with strong problem-solving skills and the ability to thrive in a dynamic, fast-paced research environment.

Qualification Requirements

• Ph.D. in Mechanical Engineering, Mechatronics, Food Processing, Industrial Engineering, or cognate discipline from a reputable university.
• Demonstrated ability in firmware programming and real-time process control integration.
• Strong communication skills, both verbal and written, with the ability to document processes and present findings effectively.

What we offer

• A collaborative and inclusive research environment.
• Access to state-of-the-art laboratory facilities and equipment.
• Opportunities for professional development and career growth.
• Engagement with a leading research team committed to advancing an emerging topic of global relevance.

Applications

Please send your complete application including a cover letter and detailed CV to [email protected].

Only shortlisted candidates will be contacted.

We are looking forward to your application!