Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Your Team, Your Impact

The role is part of our Test Operations and plays a critical role in supporting Product and Test Engineers with test development, product qualification, and manufacturing release. Additionally, it involves collaboration with production and planning teams to optimize spare capacity for revenue generation. The position encompasses the management of Marvell’s test equipment, including testers, handlers, probers, and related hardware, with an emphasis on ensuring operational readiness and driving continuous improvement.

What You Can Expect

• Collaborate with product & test engineers and external vendors to install, configure, buyoff and operate testers, handlers, change kits, probers and hardware items to support NPI Test development projects.
• Own and drive equipment installations, buyoff & operational readiness.
• Develop procedures and documentation for tools handling, setup, conversions to achieve high up time & low operational cost.
• Guide technicians on schematic interpretations, board level troubleshooting and bench setups.
• Work with vendors for tool maintenance, upgrade, repair & calibration works as necessary.
• Review and maintain key spares to achieve high levels of equipment & HW uptime.
• Generate periodic management updates on equipment installation & asset utilization metrics.

What We're Looking For

• BS in EE/ME with minimum 7 years of experience in handling ATEs, Auto Handlers, Change kits, Wafer Probers and associated hardwares.
• System knowledge with hands-on experience in UltraFLEX & Advantest 93K testers.
• Solid understanding in correlations, calibration, golden unit test, preventive maintenance & production release processes.
• Experience in driving root cause analysis and CA/PA to achieve high equipment uptime & stability.
• Work in rotating shifts (day or night schedules) to support project teams across the globe.
• Self-starter, fast learner, good communicator, able to work in matrix organization, juggle multiple tasks.
• Knowledge in ESD controls, GRR, 5S, TPM, OEE, 8D, ISO-9K, MS-Office tools.
• Hands on experience in setup, troubleshoot & running of Hon Precision, Epson and Cohu handlers preferred.

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Singapore Based (Woodlands Industrial Park / Site Office)

5.5 Days work per week (Mon to Fri 8:30am to 5:30pm & Sat 8:30sm to 12:30pm)

Salary: $3,000 to $6,000 depending on experience

Candidate must possess at least a Diploma, Advanced/ Higher/ Graduate Diploma or Degree in Mechanical, Electrical Engineering + Experience in chiller system

Career Progression Opportunities

Responsibilities & Duties

Knowledge of M&E project requirements and contract requirements

Able to manage projects/ claims/ sub-contracts

To able to work odd hours (if necessary)

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

• Central-North location
• 5 days work week
• $7,500 - $13,000 + Variable bonus
• Excellent career progression
• Attractive employee welfare benefit
• Regional projects spanning from Singapore to China, Bhutan, and Cambodia.

Responsibilities:

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe Structural/ Geotechnical design and excellent delivery of service to clients.

• Serve as Qualified Person (QP) and responsible for PE endorsement for projects assigned
• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural/Geotechnical Engineering or its equivalent
• Local design experience in C&S/ Geotechnical engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports
• Registered with Singapore PE Board as Professional Engineer
• Willing to sign as signing QP

We regret that only shortlisted candidate will be notified.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Job Summary:

We are seeking a talented IT Engineer - MES who will be responsible for the integration of Computer Integrated Manufacturing (CIM) systems and Manufacturing Execution Systems (MES) focusing on improving efficiency and productivity to enhance manufacturing processes.

Mandatory Skill-set:

• Degree in Computer Science, Computer Engineering;
• At least 2 years of experience in supporting Manufacturing Execution System (MES) applications (e.g., Siemens Opcenter, Rockwell FactoryTalk);
• Proficiency in programming languages such as SQL, Python, or C#;
• Working knowledge in Unix scripting;
• Good understanding in application server, client application and database (i.e. Oracle);
• Independent and proactive yet a strong team player;
• Excellent spoken and written communication skills.

Desired Skill-set:

• Experience in Tibco (TIB / RV) in high technology manufacturing environment.

Responsibilities:

• Provide L2 and L3 support for production systems, focusing on monitoring, maintaining, and continuously improving the Manufacturing Execution System (MES);
• Ensure the proper operation of production lines concerning products, routes, operations, equipment, recipes, and lot movements;
• Analyze user requirements to perform MES modeling and configuration for changes in material flow;
• Participate in User Acceptance Testing (UAT) and System Integration Testing (SIT) to validate system performance and functionality;
• Offer both user and system support during pre-implementation and post-implementation phases to ensure a smooth transition and operation;
• Ensure that development tasks are completed on time, adhering to corporate policies and guidelines, with proper documentation;

We are seeking a electrical technician to join ourteam in Singapore.

The ideal candidate should

Job responsibilities

- installation of all types of CCTV/ door access ,etc.

- perform service & repair all types of CCTV/door access system.

- perform checking maintenance andtroubleshooting of CCTV/door access.

- Any other duties as assigned by Managerduring project, from time to time.

- perform handover with customer after jobcompleted.

Job requirement

- At least 4 Year(s) of working experience inelectrical work /installation /

- Have ITC/Diploma in Electrical may bepreferred.

- Be mild-tempered

- Be able to work overtime when required.

- Applicant with CSOC/BCSS cert may bepreferred.

- Required language (s): English (written andspoken)

SOLAR PANEL INSTALLATION WORK

Responsibility to take care of the project and lead workers.

High floor sun site work.

Assessing locations to ensure they are suitable for solar panels Measuring up areas for installation Making adjustments to building surfaces so panels fit and are adequately supported Installing and maintaining solar panels on homes, business premises or open land,Solar panel installers are responsible for installing solar panels on roofs, in fields, or other surfaces. They work with a variety of different equipment and materials to ensure that the panels they install are properly connected and functioning correctly. Solar panel installers must have strong technical skills and knowledge of their craft.

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

Min. 3 to 4 years’ experience in Welding & fitting

Able to read construction drawings and work independently

Workers who having welder certification of 3G/4G/6G

Stainless steel piping welding

Shielded Metal Arc Welding

ARC, TIG & MIG welding

Gas Cutting & Grinding

Lays out, positions, aligns, and fits components together.

Bolts, clamps, and tack-welds parts to secure in position for welding.

May assemble parts by bolting and riveting.

Job Description

• Perform general drafting work including (but not limited to) the detailing of civil, structural, architectural, and other related drawings based on preliminary concepts or sketches.
• The ability to do drafting with only discussion with engineers (without sketch) is an advantage.
• Preparation of 2D drawings on AutoCAD for civil, structural and architectural works.
• Preparation and/or update 3D model and generate fabrication drawings and MTOs.
• Preparation and review construction shop drawings.
• Preparation and review steel fabrication drawings.
• Support project team in case of design and technical concerns during construction.
• Collaborate with C&S team as well as overall project team.
• Perform occasional site visit to check actual conditions for engineering or check design compliance.
  

Requirements

• Diploma or Degree in Architecture, Civil Engineering or other relevant disciplines.
• Minimum 2 years of experience in the Process/Oil & Gas or similar industry.
• Fresh graduates are also welcome to apply
• Proficiency in Drafting & Modelling software.
• AutoCAD proficiency is a must. Experienced in Modelling software such as Revit or Advance Steel is also required.
• Experience in both greenfield and brownfield projects.
• Willingness to learn and possess a “can-do” attitude.
• Ability to do simple Bill of Quantities.
• Ability to work effectively in a team environment or individually (if necessary).
• Ability to multitask if necessary and work in a fast-paced setting.
  

• Basic Salary: $6,000 to $8,000 Basic + $1,000 Transport allowance + Mobile + Sales Commission

• Possess sales experience in SEMICONDUCTOR FRONT END PROCESS

Our client is a Europe MNC & a global leader of instrumentation equipment in the semiconductor & pharmaceutical industry.

Responsibilities:

• Manage & grow client base from MNC to SME
• Achieving or exceed sales & revenue targets
• Support, perform & coordinate instrument demo to clients
• Manage complex sales with ability to sell across different levels within accounts

Requirement:

• Diploma or Degree
• Sales experience in Semiconductor Front End process
• Proficient in Chinese to coordinator with Chinese speaking clients

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

• German MNC / Semiconductor industry
• Good Salary Package
• Good career exposure

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.
• Conduct daily pass-down meetings and escalate line issues if any
• Oversee manpower/overtime and consumables planning
• Ensure manufacturing and safety procedures are being followed
• Conduct training/coaching to leaders & operators to improve performance
• Implement ideas and improvement activities to prevent human errors
• Ensure good discipline and housekeeping in the line
• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT
• Preferably experienced in high-tech, high-vol manufacturing environment
• Good leadership and communication skills
• Shift Work (Morning and Night shift)

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the

Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Vivian Chung Fhui Tiin

EA Personnel Reg No: R22106436

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

As Sr/Engineer for PDE Technology Development Process Integration, you will be responsible for developing advanced packaging process solution and ensure New Process, New Equipment, New Material and Path finding activities success for NAND, mNAND and DRAM, Controller in Micron. To lead new Technode process readiness and improving the yield, quality and reliability with process characterization and optimization and new materials, machines & technologies introduction. You will need to have understanding of Frontend Process, packaging requirements, chip/package interaction, equipment capability and process technology in the industry and the ability to enable best technology for New Technode & Product Introduction with assembly packaging requirements. You will also be required to drive & collaborate with multi-functional teams to resolve assembly process related problems.

Key Responsibilities

Ensure smooth transition from new process development, 1st qualification success to small volume production launch

• Development and Qualification of new packaging process, material, equipment and technology solutions to meet new Technode (NPI) requirements and schedule
• Perform process TRA, risk mitigation execution and process recipe readiness prior Silicon arrives and ensure 1st pass rate.
• Lead/partner with cross function team/site, to ensure successful transfer to CEM for LVM.
• Qualify new process/technology/equipment/materials
  Implement PDE TD PMI (Product Maturity Index) methodology & provide proper Documentation for product transfer CEM & HVM

Identify path finding opportunities for continuous yield improvement and cost reduction activities

• To understand and be able to integrate process knowledge between upstream and downstream across Si and assembly/packaging process
• Understand the future trend, technology and capabilities required for future packaging solutions, work with teams to put in place new capabilities to enhance process performance.

Provide new solutions on time to meet company and customer needs

• Define, develop and establish process capabilities, strategy and roadmap
  To develop & engage creative solutions for new capabilities or to overcome the identified process constraints, ahead product requirements.

Job Requirements:

• PhD/Masters/Bachelor’s in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• At least 2 years' experience in semiconductor industry
• Experience in Frontend fab Process integration or Module process with technical knowledge on wafer and die level process technology
• Understanding of Micron’s silicon and how it interacts at backend process & package level through CPI is a plus
• Strong project management skills to ensure execution to timelines
• Strong communication and presentation skills
• Understanding of business needs and customers’ requirement
• Ability to integrate & partner with people from cross function teams

Keen on the role? Apply now!

Our client specializes in high-precision CNC machining and custom manufacturing. Due to business needs, they are now recruiting a Welding Process Engineer to be part of their Welding Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Welding Process Engineer:

• Design and create welding procedures, specifications, and jig fixtures.
• Perform TIG welding and have knowledge of orbital welding (preferred).
• Introduce and implement advanced welding technologies and techniques.
• Estimate costs, resources, and timelines for welding projects.
• Train welding personnel on techniques and safety protocols.
• Maintain comprehensive records of welding procedures, inspections, and certifications.
• Develop and uphold Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).

Requirements:

• Diploma in Mechanical Engineer
• Possess Certified Welder Inspector (CWI) is an added advantage
• 3 years of relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Summary

To provide SAP Basis support for a local Chinese restaurant. He/She will be

• responsible for the day-to-day operations of the SAP systems.
• system configuration, administration, monitoring, and troubleshooting of the environment.
• He/She will need to provide technical support and leadership for SAP systems, which can include implementing patches, overseeing upgrades, establishing processes for monitoring performance, system configuration, design, and application support.

Job Description

• Ensuring 24/7 SAP system availability.
• Responsible for Managing User/Client Administration, Authorization Management, System Performance Management, Audit Management, Transport Management System, Background Job, Patches installation, System Backup & Recovery, Kernel Upgrade, OS & Database Maintenance for Jumbo Group wide.
• Responsible for managing and conducting SAP Business Continuity Planning, Disaster Recovery.
• Ensure Optimum server performance and Preventive maintenance to keep daily operation smooth.
• Manage SAP daily support ticket within defined Service Level.
• Custodian for SAP System Architecture, Hardware, and integration landscape.
• Manage and liaise with third party vendor.
• Deliver all IT projects on time.
• Any other ad-hoc duties as assigned by the Manager from time to time.

Job Requirements

• Degree in Computer Science , Information Systems, Engineering, or equivalent
• Knowledge in Basis Administration is a must
• 1 to 2 years of relevant SAP Basis experience
• Basic knowledge on SAP HANA and Netweaver technology
• Interested in processes within software development landscapes
• Prior experience in S4/Hana would be advantageous
• Analytical, meticulous and have good sense in troubleshooting
• Ability to articulate and communicate with people of all levels in the organization
• Able to work independently and lead in projects
• Linux, SAP S4/Hana environment

As a Field Service Engineer, you will have responsibility for installation, service, and maintenance of Gauge Tank Level Gauging Systems on sailing ships/vessels and in shipyards, as well as offer in-house technical support and remote service to customers and colleagues around the world. One of the key offering is the fiscal K-Gauge Custody Transfer System (CTS), which is a critical system in LNG and LPG carrier operations.

Key Responsibilities:

• Installation & commissioning of K-Gauge tank level monitoring systems
• Service & maintenance of K-Gauge systems onboard vessels both locally and globally
• In-office technical support and remote services to global colleagues and customers

Requirements:

• Typically diploma or degree in one or more of the following: electronics, instrumentation, automation, mechatronic or telecommunication. Relevant experience may compensate for lack of education
• Field experience from maritime, shipping and/or offshore oil & gas installations is an advantage
• Good oral and written communication skills in English
• Highly motivated for worldwide support activities (travelling is required)
• Able to work at Toh Guan

Role:

Fire Protection Engineer (Building Construction)

• Singapore Based (Working location: Labrador area)
• 5.5 Days work per week (Mon- Fri 8.30am-5.30pm; Sat 8.30am – 12.30pm)
• $3500-$5500
• Diploma / Degree in Mechanical Engineering/Building Services + 5 years of relevant experience
• Experience in Water Mist system and/or foam system is added advantage
• Career Progression Opportunities

Job scope

To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples

To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples

Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hose reel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)

Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions

Manage and execute project as per the schedule

To attend meeting with contractors to address issues and update progress

Study and reviewing of drawings, specifications for compliance

Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.

Plan and lead testing and commissioning of the fire protection systems.

Follow up with site / authority inspections, defects rectifications of the fire protection work.

Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.

Follow up with maintenance of fire protection systems during DLP

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Location: Henderson Road

Working Hour: 5 Days work Week 9AM – 6PM

Salary: $4,500 - $5,000

Job Scope

• Be the primary technical contact for customers and in house repair jobs
• Assist customers in the repair and maintenance activities, but also with Providing spare parts and associate services
• Identify and translate customers’ requests ;
• Handle technical incidents and establish reports (troubleshooting, expertise, gathering useful information for analysis
• Guarantee, when necessary, the proper processing of offers : spare parts, onsite interventions and repairs.
• Coordinate onsite interventions actions and ensure an ongoing communication to the customer.
• Provide technical assistance to the Repairs Department and Field Service Technicians + Business Centers ;
• Occasionally promote to customers, technical training sessions and sales of spare parts and repairs ;
• Initiate, together with the appropriate stakeholders, the implementation of corrective actions that arose from customer complaints/claims.
• Be the technical interface within the departments, such as Engineering, Purchasing, Sales, Production, Global Service and customers
• Identify potential sales opportunities and forward the information to the sales teams.
• Identify the spare parts needed for Sales team to quote to customer
• Recommend spare parts needed for regular maintenance/during troubleshooting
• Acts as last form of technical checks to make sure the spares quoted is according to customer’s requirement
• curb warranty costs.
• Be responsible for the collection of outstanding payments for the Customer Service department
• Maintain proper records of interaction with customers within the CRM tool
• Control offers and order confirmation as per applicable procedures

Requirements

• Have 3 to 5 years of experience in Mechanical Engineering. Marine engineering with mechanical knowledge will also be considered.
• Degree in Mechanical Engineering
• With hands on experience on compressors, turbines and pumps mechanically
• Be willing to travel if needed.

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De