Job Description & Requirements

· Manage and monitor all installed systems and infrastructure

· Install, configure, test and maintain operating systems, application software and system management tools

· Proactively ensure the highest levels of systems and infrastructure availability

· Monitor and test application performance for potential bottlenecks, identify possible solutions, and work with developers to implement those fixes

· Maintain security, backup, and redundancy strategies

· Write and maintain custom scripts to increase system efficiency and lower the human intervention time on any tasks

· Participate in the design of information and operational support systems

· Provide 2nd and 3rd level support

· Liaise with vendors and other IT personnel for problem resolution

Requirements and skills

· BS/MS degree in Computer Science, Engineering or a related subject

· Proven working experience in installing, configuring and troubleshooting UNIX /Linux based environments.

· Solid experience in the administration and performance tuning of application stacks (e.g.,Tomcat, JBoss, Apache, Ruby, NGINX)

· Solid Cloud experience, preferably in AWS

· Experience with virtualization and containerization (e.g., VMware, Virtual Box)

· Experience with monitoring systems

· Experience with automation software (e.g., Puppet, cfengine, Chef)

· Solid scripting skills (e.g., shell scripts, Perl, Ruby, Python)

· Solid networking knowledge (OSI network layers, TCP/IP)

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: November 2024

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Primary Objectives of Position

• Manage the overall supervision of maintenance activities in depot and workshop
• Responsible for the availability of passenger trains, engineering train vehicles, light rail vehicles and workshop overhaul or plant equipment for mainline operation.
• Manage the budget expenditure of the section
• Ensure all defects on vehicles/equipment are rectified in a safe and responsive way.
• Provide an effective technical support service to all other Rolling Stock sections, including development and control of an overall maintenance plan, provision of Work Instructions, procedures and technical documentation and provision of regular performance information.
• Ensure that Rolling Stock staff and contractors within their sections are adequately trained and competent to perform their tasks safely and proficiently in the railway environment.
• Overall-in-charge of managing corrective and preventive maintenance of NEL/SPLRT passenger trains, engineering trains, light rail vehicles, or depot plant equipment.
• Overall-in-charge for all engineering projects in NEL/SPLRT Rolling Stock.

Major Responsibilities

• The day-to-day management of staff in their section.
• Ensuring individual roles, functions and responsibilities are clearly defined and communicated.
• Managing section budget resources to maximize maintenance outcomes and improve customer satisfaction.
• Providing advice and support to the HOD and Executive management as required.
• Identifying areas for improvement through training and development programs
• Ensure all staff are adequately trained and competent.
• Manage, lead, and motivate the section to achieve reliability, quality, cost and availability targets to meet customer needs.
• Maintain the performance of all vehicles and depot equipment.
• Perform and standby for company and department duty schedule such as PST, EIC, AEIC or Rerailment duty

The above activities are no means exhaustive and are subjected to amendment whenever is needed

Specific Safety Responsibilities

• Ensure all work related to the section are undertaken in a safe way during all maintenance activities in Sengkang Depot.
• Undertake Monthly Safety Observations of all areas under the purview of Rolling Stock and ensure that controls are in place to achieve safety.

Job Specifications

Minimum Education / Qualifications

• Degree or Diploma in Engineering from a recognized university or polytechnic.

Minimum Years of Relevant Experience

• Preferably with 3 years of relevant experience in Railway Engineering/Maintenance or equivalent

Knowledge/Skills

• Strong Communication, Writing, Analytical and Problem solving skills
• Knowledge of Training and Development, preferably with full ACTA qualification
• Conversant in MS Office software (Word, Excel, PowerPoint)

Attributes

• Highly motivated and resourceful team player
• Strong interpersonal and communication skills
• Strong planning and organization skills
• Analytical and meticulous

Want to be part of a fun and exciting team in one of the fastest growing IT companies in Singapore? Xtremax is an established IT company that provides IT services such as website development and design to government agencies and private companies to help them transform their digital experience. We are expanding and actively looking for an experienced and highly motivated individual for the Technical Support role.

Responsibilities:

• Provide customer support by answering phone and email enquiries
• Primary investigation, information gathering before escalating to internal team for further diagnosis
• Manage operational issues/risks in a timely manner; escalating when necessary
• Keep track of service requests to meet service KPIs
• Follow standard operating procedures, and respond professionally
• Communicate effectively between customers and development team on escalated issues
• Understanding of issues raised by customer
• Good sense of ownership to customers’ reported issues and track them through resolution and bring to closure of ticket raised
• Serve as a key point of contact based on agencies assigned
• Cross functional collaboration: You are required to work with different teams within our organisation to meet the needs of our business.
• Escalate critical issues / roadblocks to the Technical Support Team Lead

Requirements

• Minimum polytechnic diploma in IT, computer engineering, or relevant experience
• Preferably have knowledge in cloud services (eg. Microsoft 365, Amazon Web Services, Microsoft Azure, Google Cloud)
• Preferably have knowledge in ticketing system (JIRA)
• Good interpersonal and communication skills
• Strong analytical and problem solving/troubleshooting skills
• Strong interest in technology
• Ability to communicate highly technical information to both technical and non-technical customer audience
• Ability to work independently and as a team in a dynamic environment

By submitting your resume/CV, you consent and agree to allow the information provided to be used and processed by or on behalf of Xtremax Pte Ltd for purposes related to your registration of interest in current or future employment with us and for the processing of your application for employment.

You also represent to us that you have obtained the consent of your referees when you disclose to us their personal data for the purpose of conducting reference checks.

The personal data held by us relating to your application will be kept strictly confidential and in accordance with the PDPA. You may also refer to our Privacy Policy for more details here: https://www.xtremax.com/privacy-policy

We regret to inform you that should you not consent to providing the necessary data required for us to process your application, your application will be considered void.

Apply for this job

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

Roles & Responsibilities

• Carry out ELV or security systems such as IP CCTV, Intercom, Access Control, IP PBX, Public Address system & etc for maintenance for residential condominiums, and commercial & industrial buildings.

• To diagnose & troubleshoot faults in the system and resolve these technical issues.

• Attend to clients’ queries on any operational & maintenance-related matters.

• Maintain good relationships with customers.

Requirements and skills

• ITE/Diploma in Electronics/Electrical or IT-related discipline.

• Min. 2 years of working experience in the security line (CCTV/Intercom/Access Control), and able to commission the system.

• Possesses knowledge of Network and basic IP systems.

• Strong understanding of cable checking and troubleshooting techniques.

• Experience in setting up and managing IP PBX systems is a plus.

• Computer literate with good knowledge in using Microsoft Office applications (Excel, Word).

• Good communication skills.

• Self-motivated, service-oriented, passionate, and responsible.

• Self-discipline and willingness to work staggered.

• Fast learner, independent, and can work under pressure.

• Class 3 Driving License Required.

• 5.5 workdays/week.

Role: Resident Engineer at C2D Solutions Pte Ltd

C2D Solutions Pte Ltd is seeking an experienced full-time Resident Engineer to oversee the technical aspects of construction projects.

Key Responsibilities:

• Manage a team of technical supervisors to ensure compliance with regulatory and client requirements.
• Collaborate with Professional Engineers, regulatory authorities, and contractors for planning, design, and supervision to solve site problems and ensure timely project completion.
• Implement and maintain the site supervision quality and safety assurance system.
• Supervise structural and geotechnical works, identifying any contractor non-conformities.
• Understand and interpret drawings and contract documents.
• Conduct regular site checks to ensure compliance with health and safety regulations per MOM.
• Attend site progress and technical meetings with the project team and client to address issues.
• Ensure proper management of site documentation, including meeting records, safety documents, and submissions.

Qualifications:

• Degree in Civil/Structural Engineering from a recognized university and registered as a Resident Engineer with IES.
• Minimum 5 years of experience in supervising industrial developments, with expertise in bored piling, precast structures, and structural steel.
• Knowledge of AutoCAD and BIM is preferred.
• Strong supervisory and leadership skills.
• Effective communication skills to interact with all levels of personnel.

This role is essential for ensuring high standards in construction project execution.

Job Description

• Carry out routine maintenance and repair work (Machine and Facilities)
• Perform plumbing, painting, and minor repairs
• Provide technical support and training to staff
• Implement preventive maintenance schedules
• Ensure compliance with health and safety regulations

Job Requirements

• Electrical / Mechanical engineering knowledge is an advantage
• Machinery repair and maintenance is an advantage
• Able to work as a team and individually
• Must be willing to be hands on
• Able to do overtime and work on Saturday and Sunday if required

Responsibilities:

• Provide first-line support for technical issues via phone, email, or in-person.
• Diagnose and resolve hardware, software, and networking problems.
• Install, configure, and maintain operating systems, applications, and hardware.
• Monitor and maintain IT infrastructure, ensuring optimal performance and security.
• Assist in the setup and deployment of new hardware and software.
• Create and maintain documentation for processes, procedures, and troubleshooting steps.
• Collaborate with other IT team members to improve processes and resolve complex issues.
• Provide training and support to end-users on new technologies and tools.
• Any ad-hoc matter assigned by superior.

Requirements:

• Diploma in Information Technology, Computer Science, or a relate field and above.
• At least 2 years of proven experience in IT support or a similar role.
• Experience in system engineering, IT support, or a related role are advantageous.
• Basic knowledge of operating systems (Windows 10, 11 & Server) and office productivity software.
• Basic networking fundamentals.
• Experience with remote support tools and ticketing systems.
• Understanding of security principles and practices.
• Proficient in MS Office such as PowerPoint, Excel, Words etc

Job Description

As Engineer of MSB Lean Manufacturing, you will manage the implementation of Lean transformation methodologies and tools in Assembly, Test and SSD manufacturing at MSB. You will collaborate closely with site functional teams to identify, explore and implement lean methodologies and tools to drive improvements in throughput, labor productivity, yield, and cycle time performance.

Responsibilities:

• Lead the adoption and implementation of Lean methodologies and tools across Assembly, Test, and SSD manufacturing.
• Facilitate continuous improvement events across different functional teams (e.g., Kaizen, Value Stream Mapping (VSM), Projects, Workshops).
• Develop and sustain programs and systems to foster a Lean culture.
• Conduct labor productivity analyses (e.g., Touch-time, MMR, spaghetti charts) to enhance operator and technician efficiency and reduce operational errors.
• Oversee Utilization/ Overall Equipment Effectiveness (OEE) to identify key sources of losses and improvement opportunities.
• Collaborate with functional experts to identify areas for improvement through the application of Lean methodologies and tools.
• Propose Lean approaches and initiatives, including Kaizen and Continuous Improvement Projects.
• Act as the key integrator between central and site functional teams, developing, driving, and communicating progress on critical Lean improvement initiatives.
• Develop an overall view of critical initiatives and their impact on key performance indicators.
• Provide visibility on program status, including key achievements with clear ownership.
• Trigger interventions to ensure programs stay on track towards targets.
• Support regular reporting and meetings with senior leadership, including deep dives for weekly/monthly reports and ad-hoc senior management updates.

Requirements

• Bachelor’s /master’s in Industrial and system engineering, engineering management, Production & Operation Management, or related field.
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations
• Background in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals will be beneficial

Keen on the role? Apply now!

This role is for a technical support position and they will be responsible for overseeing the project initiated by APAC Infrastructure as a Service (IaaS) team. They must ensure that the project deliverables are delivered on time and aligned to agreed SLAs and processes.They will help ensure the quality of IaaS services remains consistently high, that operating policies are developed or are strictly followed, and adhere to all IT security policies to maintain system integrity and quality.

Key Responsibilities:

Technical Management Responsible for the overall BAU support operations of IaaS systems in APAC (infrastructure in Australia, Singapore, Hong Kong and Japan) and regional oversight of the rest of APAC countries

.Must have skills in :Microsoft Windows Server 2012, 2016 & 2019 Microsoft Active Directory ITIL 3 or 4 Foundation

Good to have skills :PowerShell scripting

• Must have experience working on virtual technology platform VMware websphere 6.x or Microsoft HyperV 2019.
• Must know how to manage Active Directory for the authentication and privilege account management.
• Candidate must be competent on how to manage the OS on physical servers and virtual servers.
• Preferable if the candidate has knowledge and skills working with Low Latency or Electronic Trading Network
• Strong knowledge on governance, server administration and services in cloud based environments. In short, able to follow the bank’s standards, processes and procedures.
• Proficiency in handling and/or contribution to complex IT projects.Knowledge and experience with Ansible Tower, Ivanti, Centrify, Veritas and BMC software.
• Knowledge using or supporting VSAN, iSCSI, DAS, NAS, SAN storage technologies.
• Have good scripting skills, in PowerShell, Python or other programming languages.
• Have knowledge and experience using Agile methodologies and/or has been part of DevOps teams.
• Project Management experience is a bonus

| | Specific Qualifications Required | |

• A professional certification in any of the Operating Systems listed.
• Qualified in ITIL 3 or 4 Foundation

We are looking for candidate who loves challenges and working in a fast-paced environment utilizing their technical expertise confidently and a passion for troubleshooting and analysis. You will be part of the technical support team that provides the technical support to our customers. You should be a resourceful team player who is self-motivated, responsible and able to work well under pressure. You should have the potential or ability to lead a group of technical support engineers handling technical problems.

Your job scope involves providing end customers and partners with in-depth technical assistance in the use of ANTlabs products and solutions, cooperate with the sales and professional services teams to ensure ongoing customer success and satisfaction, and participate in the creation and maintenance of support documentations.

To join our team, you should:

• Have at least 3 years’ experience working with Linux OS (Centos)
• Be comfortable in handling critical customers solution projects

RESPONSIBILITIES

• Project Support.

- Responsible as Principal Engineer for assigned solution projects

- Understanding of scope environment of existing project support & manage customers

- Troubleshoot and recover customer services within SLA (onsite/remote)

- RequireD traveling to customer sites when needed

- Provide necessary technical training for new staff, L1 or customer (when needed)

- Take over upcoming new projects from Solution Team, understand technical solutions and provide support

• Product Support.

- Perform technical escalation point for Service Desk (L1)

- Able to perform troubleshooting and identify the abnormality (Cloud platform and gateway products)

- Troubleshoot and recover customer services within SLA

- Analyse customer report issues, timely escalate issues to Technology Team and work for solution(s)

• Prepare and accurately execute (remote/onsite) MOP (Method of Procedure) and verify services
• Timely share available new updates for relevant solutions to customers and schedule patch update
• Maintain solution projects detailed database and update accordingly
• Maintain OPS, NMS and perform basic operations
• Perform weekly rotational on-call standby duties

SKILLSETS

• Working knowledge and understanding of basic protocols (TCP/IP, DNS, HTTP, DHCP, RADIUS, SMTP, SNMP)
• Good hands-on working experience in -

- Database (MySQL, MariaDB)

- Clustering/HA (Pacemaker, Heartbeat, DRBD)

- Web services - Apache/Nginx

• Troubleshooting skills to analyse and isolate technical issues
• Technical explanation and incident management skills
• Experience in technical support operation for external customers solution projects and ensure customer service within SLA
• Experience in server-grade hardware maintenance
• Experience in deploying and maintaining Cloud-based solutions (preferred experience in AWS)
• Experience in virtualization platform (KVM, VMware, Kubernetes, Docker)
• Experience in automation (Ansible)
• Experience in bash scripting
• Some knowledge of PHP and Perl scripting
• Some knowledge of using Wireshark would be beneficial
• Good understanding on basic networking, Wireless technology and authentication (EAPSIM, EAP-PEAP,802.1x)
• Experience in ELK, Speedtest application

RESPONSIBILITIES

• Provide technical deployments in all running projects & new projects as a team member of Service Delivery Division
• Understand how to gather more technical requirements/information and recommend a solution
• Must be able to do Linux system installation, end-to-end/pilot testing at staging/production environments, ANTlabs solution verification and fault escalation
• Perform troubleshooting and patch fixes at a hardware and software level
• Able to diagnose, isolate, troubleshoot, and fix technical issues under pressure
• Show responsibility on all assigned tasks even need to work after office hours (at situations) in achieving tasks or timely project completion
• Demonstrated ability to execute and perform timely follow-up to ensure customer satisfaction & instil quality in every aspect of job function
• Any other matters as instructed by Supervisor (or) Project Managers when required due to job nature
• Overseas travel may be required for onsite implementation (duration - depends on project/customer/onsite requirement).

TECHNICAL SKILLS/EXPERIENCE

• Experience in installing, managing, and troubleshooting Linux Operating systems such as RHEL, CentOS or Ubuntu
• Experience and knowledge of open source applications/tools such as HA clustering, HA Proxy, BIND DNS, Apache, Nginx, LDAP, SMTP, NTP, NFS, SNMP, PRTG, etc.
• Experience and knowledge of Virtualization technologies (KVM, Microsoft Hyper-V and VMware)
• Experience and knowledge of Cloud Services like AWS, GCP, Azure, etc.
• Database knowledge such as MySQL, MariaDB, PostgreSQL, etc.
• Basic understanding of cloud / enterprise networking and security best practices
• Knowledge of OS/Application security hardening
• Experience in Linux shell/Bash script
• Experience and knowledge of networking such as switching, routing, firewall, VLAN, TCP/IP
• Knowledge of containerization and related tools (Docker, docker swarm, Kubernetes) will be preferred
• Having Dell Power Edge installation and troubleshooting experience will be advantageous

REQUIREMENTS

• Minimum 3-5 years of technical work experience in IT/Telecom industry with following technical skills/experience
• Bachelor’s Degree in: Engineering (Computer / Telecommunications), Computer Science / Information Technology or its equivalent
• Fast learner with a positive attitude and ability to handle multiple concurrent projects independently without much supervision
• Able to perform duties inside a data centre environment, as well as outside of office hours and/or night activities as required by the projects
• Proven experience in creating and maintaining project documentation, including but not limited to High-Level Design (HLD) and Low-Level Design (LLD) documents, deployment reports, technical specifications, and user manuals

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Responsibilities:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements for FEOL area

- Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap

- Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements

- Work with equipment suppliers to develop new capability

- Engage in active participation in Package Development Engineering activities

- Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need

- Create decision matrix for equipment and material selection

Installation and qualification of new equipment platform and handover to production group (pilot line setup)

- Plan/submit capital request to acquire new Equipment

- Create purchasing specification (Doc2) document

- Establish the new equipment qualification criteria and activities roadmap with respective functional - team

- Establish project handover requirements and procedures upon machine qualification

- Prepare documentation for handing over with respective site owner

- Conduct data gathering for low volume production

- Conduct training for Site representatives

- Feedback loop for Continuous Improvement after mass volume production

Maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

- Maintain and regularly update the TOR, with inputs from local or other assembly site

- Maintain general knowledge of process and material characteristics and translate to equipment design requirement

- Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

- Maintain knowledge of design constraints and weakness of existing platform

- Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:
- PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
- Minimum 2 years’ experience in related semiconductor industry
- Experience with technical knowledge on assembly and/or wafer bumping packaging technology
- Advantage packaging technology and Front end of line background will be preferable and plus point
- Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
- Fast learner, with initiative and independence (min supervision)
- Good teammate, ability to integrate and cooperate with cross function teams and external vendors
- Strong communication and presentation skills
- Understanding of business needs and customers’ requirement
- Strong project management skills to ensure execution to timelines

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 8+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Job Summary

The Water Treatment Marketing Support Engineer will provide technical support to the marketing team, focusing on membrane filtration technologies and water treatment solutions. This role involves collaborating with sales teams, customers, and engineering departments to effectively communicate product benefits, conduct market research, and support business development initiatives.

Key Responsibilities

1. Technical Support: Provide in-depth technical knowledge of water treatment processes, particularly membrane technologies (e.g., Nano Filtration, Reverse Osmosis) to assist the marketing and sales teams.
2. System Design: Develop and optimize designs for membrane filtration systems, including Nano Filtration and Reverse Osmosis technologies.
3. Water Quality Assessment: Analyse raw water quality data to determine treatment requirements and evaluate the effectiveness of membrane technologies.
4. Membrane Selection: Evaluate and select appropriate membranes based on performance specifications and project requirements.
5. Process Optimization: Identify opportunities to enhance system efficiency and increase water recovery rates.
6. Troubleshooting: Support operational teams in diagnosing issues related to membrane fouling, scaling, and maintenance.
7. Documentation: Maintain accurate records of system performance, maintenance activities, and compliance with quality standards.
8. Customer Engagement: Engage with customers to understand their requirements and provide tailored solutions that meet their specific water treatment challenges.
9. Training and Education: Develop training materials and conduct workshops for internal teams and customers on product features, benefits, and applications.
10. Marketing Materials: Contribute to the creation of marketing collateral such as brochures, case studies, and technical papers that highlight product advantages and applications.
11. Feedback Loop: Gather customer feedback on products and services to inform future product development and marketing strategies.

Qualifications

1. Diploma, equivalent or higher, with a major in Chemical Engineering, Environmental Engineering, Water Resource Management, or a related field.
2. Knowledge of design and visualization software such as AutoCAD is a plus.
3. Experience: Minimum of 3 years of experience in water treatment processes or related fields with a focus on membrane technologies.
4. Communication Skills: Excellent verbal and written communication skills for interacting with technical teams, customers, and stakeholders.
5. Presentation Skills: Ability to present complex technical information clearly and effectively to diverse audiences.
6. Bilingual in English and Chinese is required.
7. Technical Skills:

6.1. Strong understanding of membrane filtration technologies (Nano Filtration, Reverse Osmosis).

6.2. Familiarity with water quality parameters and analytical methods.

6.3. Experience in market analysis and product positioning.

Desired Attributes

1. Strong analytical skills with a problem-solving mindset.
2. Ability to work collaboratively within cross-functional teams.
3. Proactive approach to identifying opportunities for improvement in products and processes.

Working Conditions

1. The position may require occasional travel for customer visits, trade shows, or training sessions.
2. Flexibility to work in a dynamic environment with changing priorities.
3. Salary (commensurate with experience): S$3200 – S$ 4200.
4. A part-time position is also available for application.

Application Process

1. Interested candidates should submit their resume along with a cover letter detailing their relevant experience and qualifications.
2. Interested applicants, kindly forward above required document and indicating earliest availability / notice period required, current and expected salary via email to: [email protected]

We regret that only shortlisted candidates will be notified.

Working Location: Defu Industrial City/PUB Water Exchange

Key Responsibilities:

• Liaise with Solutions team to understand systems design
• Perform installation, configuration and maintenance of network devices and AD server / management server on-site
• Assist Project Managers and Engineers to prepare systems related diagram for the project implementation
• Ensure systems design conforms to contract and technical requirements
• Engage with back line support and/or with vendor’s support to diagnose and rectify technical problems to effectively resolve project implementation issues
• Attend to preventive and corrective maintenance to backend system

Competence (Knowledge, Skills and Abilities):

• Skills in relating to and servicing the customers with a win-win mind set
• Skills in troubleshooting technical problems related to servers, routers, switches, and IoT devices.
• Good knowledge of the security and surveillance solutions landscape and industry trends
• Knowledge on Microsoft Clustering, Active Directory, Agent VI, Milestone, VMware and IT Security is required
• Knowledge of CentOS, Ubuntu, VMware (ESXi), Firewall, Networking, and Windows Server OS
• Proficient in Active Directory, Certificate Services, Virtualization technology, and cyber security is required
• Skills in planning and scheduling
• Professional Certificate in MCSE and CISSP would be an advantage

Requirements:

• Minimum Degree in Computer Engineering or related discipline
• At least 3 years’ experience in a similar capacity
• Experience in installation on Server / Client configuration, Network Storage and IT Network

Role Profile

This technical solution focused role is accountable to setup applications and database and ensure their optimal performance to support various GovTech projects.

Key Responsibilities:

• Setup the application and database
• Perform analysis and review software application functionality and design and suggest improvement to enhance the design to cater for new services
• Consult with software development team, internal users, and clients to improve application performance
• Administer the application including user account management and configuration of the application
• Generate Test Plans and Test Procedures for User Acceptance Tests (UAT)
• Conduct UAT and prepare final UAT Reports
• Keep a record of configuration changes and scheduling application updates
• Support production issues such as establishing root causes of application issues and liaise with the software vendor to resolve issues
• Take care of application migration and new release roll-out
• Document processes and monitor application performance metrics
• Develop tools needed by L1/L2 that will help them with their investigation process

Competence (Knowledge, Skills and Abilities):

• Good understanding of the software and hardware environments for CCTV/networked cameras system
• Proficient in Video and IoT management application, software analysis and design, as well as proposal write up
• Good knowledge on the key features of the CCTV / Networked Video / Security Camera / Video Management product in the market
• Sound network knowledge (Internet Protocols, TCP/IP, DNS, DHCP, SNMP, Network Architecture etc.)
• Familiar with Golang, Node JS, JavaScript, Windows Server OS, CentOS, Ubuntu OS and MongoDB

Requirements:

• High level problem solving and communication skills
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction

Education & Experience:

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering or related field
• At least 3-5 years working experience in Video and IoT Management application, software analysis and design

As a Senior Engineer in PDE (Package Development & Engineering) at Micron, you will be responsible for the Advance Packaging success within your scope in Metro Real-time Defect Analysis (MRDA) and guided by functional objectives, in terms of process, equipment and materials definition, development and/or optimization. You will manage and optimize your area's performance to meet or beat defined metrics. You will apply extensive knowledge to carry out tactics and collaborate with internal and external partners to build and implement packaging technology roadmaps aligned to corporate strategic objectives. You will provide advice to senior management related to tactical decision for the function. You will interact with executives, major customers and/or site managers to provide consultation, influence decisions and identify and resolve critical issues.

Identify, select, and evaluate new process, equipment and/or technology to support current and future requirements for MRDA area

• Define, development and establish new process, equipment design and/or capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new process, equipment capabilities and/or solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Actively participate in Package Development Engineering activities
• Conduct equipment benchmarking to establish the equipment suppliers and platforms for current and future need
• Create decision matrix for equipment and material selection
• Generates and set-up ADC, set-up/improve recipes
• Set-up PMON, Sampling Plans, BKM, CIP Strategies & performance indicators

Installation and qualification of new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional team
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives/personnel
• Establish the feedback loop for Continuous Improvement after mass volume production

Define, improve and/or maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

• Maintain knowledge of design constraints and weakness of existing platform
• Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:

• Bachelor's/ Master's/ PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• 4 or more years of experience with proven track record of technical leadership in semiconductor manufacturing, preferably in MRDA Process & Equipment Engineering. Experience in other Front End areas, in Post Wafer Fabrication & High Bandwidth Manufacturing technology is of greater advantage.
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill
• Hands on in recipe development for inspection and measurement workstation such as KLA, Rudolph, Nordson, CAMTEK preferred

Keen on the role? Apply now!

Key Responsibilities:

• Work along with the development teams to onboard the Project onto AWS Platform
• Guiding the continuous integration, continuous deployment, continuous testing & continuous monitoring
• Work closely with the development team and operation team to ensure project delivery and maintain compliance standards.
• Set up, deploy, and maintain scalable, high-availability systems.
• Perform and automate provisioning and security hardening of systems.
• Set up and maintain CI/CD, automated testing, development, and delivery environments.
• Writing scripts/programs for service monitoring and health checks of systems
• Day-to-day monitoring, backup, deployment, and maintenance of systems

Requirements:

• Bachelor's or Master’s Degree in information engineering, information management or computer science
• Minimum 5 years in the software development industry or server infrastructure setup
• At least 3-years’ experience working closely with infrastructure, Experience in Linux, Windows
• Network troubleshooting is a plus.
• Good hands-on experience in using AWS Cloud
• Experience with IAC / config management tools (Terraform, Ansible, Puppet etc.)
• Good understanding of hardware infrastructure systems (network switches, firewalls, router etc.) and Linux operating system
• Good understanding of DevOps Principles and practices
• Experience with cloud orchestration, configuration management and auto-scaling techniques
• Experience on building and developing CI/CD pipeline and workflow.
• Cloud & DevOps Certifications e.g., AWS Solution Architect, DevOps is a plus.