JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc.
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical installation, testing and commissioning.

JOB REQUIREMENT

• Degree in Electrical & Electronic engineering.
• Familiarity with AutoCAD, Navisworks.
• Minimum 3 years work experience in process plants or in the water/wasterwater industry, with good knowledge in electrical design of water and/or wasterwater treatment plants.

PC Refresh Engineer

We are looking for experienced full-time PC refresh engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 1-2 years of IT deskside support experiences.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description :

• Familiar with designing network topology
• Setup & integration of Network(LAN & WLAN), switches, routers, firewall and VOIP infrastructure
• Review network security including firewall rule settings, logs review, perimeter security
• Support internal network & voice infrastructure and security areas such as network security and security management
• Troubleshooting and performance monitoring on network & VoIP infrastructure
• Provides technical support for customer to resolve any network related issues.
• Critical review & improving processes to increase overall management efficiency, for both internal and external parties
• Expected to attend site surveys, customer meetings, presentations etc

Requirements :

• Minimum Diploma, Advanced / Higher / Graduate Diploma in Computer Science / Information Technology, Electronic and Computer Engineering.
• Candidates with minimally 3 years of relevant experience on networking
• Knowledge with systems, storage and database is a plus
• Team player and excellent communication skills.
• Able to perform and meet tight deadlines.
• Responsible and high level of integrity
• Singaporeans and PRs may apply

Working Hours and Location:

• Working hours is 9am to 6pm, Mondays to Fridays, excluding Public Holidays.
• Good remuneration
• Career progression depending on individual strengths and preference
• Free Training with cash incentives for obtaining certification in specific domains
• Fun and exciting culture
• City Fringe Location (Near Kallang, Lavender and Bendemeer MRT)

• Set goals for performance and deadlines in ways that comply with company’s plans and vision and communicate them to subordinates
• Organize workflow and ensure that employees understand their duties or delegated tasks
• Monitor employee productivity and provide constructive feedback and coaching
• Receive complaints and resolve problems
• Maintain timekeeping and personnel records
• Pass on information from upper management to employees and vice versa
• Prepare and submit performance reports
• Decide on reward and promotion based on performance
• Hire and train new employees
• Ensure adherence to legal and company policies and procedures and undertake disciplinary actions if the need arises.
• Proven experience as supervisor or relevant role
• Familiarity with company policies and legal guidelines of the field
• Ability to learn a variety of job descriptions

Our global R&D powerhouse as well as an innovation leader with approximately 900 specialists and abundant resources to further accelerate innovation of hearing instruments and tailored solutions including by leveraging its leading digital platform. We provide world’s first leading innovations in audiology, signal processing, electrical and mechanical engineering, material and computer science, and more.

We are steadily looking for talent from all over the world to join our team. You will make breakthroughs with your never-give-up attitude. There are plenty of options to develop and invent, be successful, and change the world for the better.

We are now looking for a Wireless System Integration Engineer to join our wireless team. You will work as a key member to integrate wireless solution for our hearing aid devices by working closely with our platform and integration team. This role will report to the manager, wireless system integration team.

Responsibilities:

Design and Development

• Will work as a Key Member in WSI-SG (Wireless System Integration-Singapore) team to design, develop and integrate the wireless solutions in our 'best-in class' hearing aids
• Will work on research area of design, simulate and develop new RF/MI Antenna concepts for all form factors of WSA Hearing Aids
• Will work closely with cross-functional teams such as Mechanical Engineering, Electro Acoustic, Rechargeable Systems and Global Wireless Teams

Test and Measurements

• Evaluate various measurement techniques, Test Concepts and strategize to quantify RF performance in R&D Labs and Mass production Test Systems

Analyze

• Evaluate technical work packages based on 'Quality', 'Cost' and 'time' as three main parameters in project management activities
• Provide technical resolutions in the product development issues
• To become subject matter expert in Wireless Integration

Requirements:

• A University Degree/Masters/PhD qualified in Electrical/Electronics/Telecom/Communications/RF/Microwave Engineering.
• 5+ years of experience
• Good Knowledge in the EM Theory of Wireless Communications.
• Good Knowledge in Bluetooth/Bluetooth Low Energy, NFMI/NFC and/or Wireless Power Transfer Technologies.
• Good Knowledge in EM CAD Tools such as CST/HFSS/ANSYS.
• Experience with Wireless/RF Circuit Design, Good knowledge in PCB Schematic/Layout Techniques (especially handling Flexible PCBs) and awareness towards EMI/EMC design techniques.
• Good Knowledge of Antenna Anechoic Chamber, RF Test Equipments.

JOB SCOPE & JOB RESPONSIBILITIES

• Basic design of heat. Mass balance, PFD, P&ID, process calculation for Water & Wastewater, RO, demin, pre-treatment, biological, chemical, PWT, etc.
• Sizing of equipment, vessel, tank and selection of material, instrumentation, control philosophy, cause and effect matrix, HAZOP, IPF, SIL study, IOM manual, etc.
• Preparing datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, Exd, ISA standards, codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, optimization and hand-over.

JOB REQUIREMENT

• Degree in Chemical /Environmental engineering or equivalent.
• Familiar with international standards, codes and regulations, offshore & onshore.
• Min. senior 10 years or engineer 5 years similar job scope preferably in Oil & Gas, Power Plant or in the water/wastewater Industries.
• Proficiency in AutoCAD is an added advantage

Job Description

• Accountable for all technical and quality issues which are related to assigned electron optics subassemblies.
• To handle daily production escalation. Provide strong technical support to production team to resolve issues and ensure system meeting shipment schedule as planned.
• Dispose non-conformance products and closely work out with supplier on the quality and process continuous improvement.
• Response to failure analysis and provide comprehensive analysis report to field support team or customers. Provide and implement the corrective action to fix the problem in systematic way.
• Work with material team on the product cost reduction, EOL component replacement, relocation of manufacturing site, and any engineering support needed from them.
• Writing ECO on any product change and ensure ECO implemented properly.
• Answerable to supplier quality and OOBQ yield. Audit supplier’s process and quality control if necessary.

Job Requirements

• PhD/Master’s/Bachelor’s Degree in electron Optics/Mechanical engineering / System Engineering or equivalent
• Knowledge in high-vacuum systems and experience in high voltage electronics
• Preferred experience in electron optics system including hardware handling experience, such as electron source, column and objective lens
• Ability to work in a clean room environment.

Job Description

• Interface with Design Engineering team for the release of new products (NPI) into Manufacturing
• Involve in product development and evaluate the design for manufacturability and reliability by participating in design reviews and the assembly of the prototype units.
• Drive continuous improvement to minimize Cycle time/Quality issues.
• Perform First Article qualifications for parts and obsolescence components.
• Generate and Maintain process and equipment work instructions, drawings, and other production document to conform to specifications.
• Work with suppliers to resolve component/yield/part problems in a timely manner and assist purchasing teams in driving supplier quality improvements and cost reductions efforts.
• Provide strong technical support to production team to resolve issues and ensure on time shipment.
• Perform detailed Failure analysis on Infant Mortality parts and come up with proposal and concepts to enhance performance.
• Apply 8D troubleshooting, including driving learning and standardization to improve spare part quality.
• Create ECO (Engineering Change Orders), Structuring BOMs and creating test and assembly documentation as needed.
• Provide fly and fix support on field escalations for analysis/resolution on any issue requiring in-depth knowledge on the product.

Job Requirements

• Master’s/bachelor’s degree in mechanical engineering/Mechatronics Engineering with 2 or more years of experience in high-mix-low-volume manufacturing
• Strong mechanical engineering fundamentals, including design principles, machine elements, materials, and fabrication methods.
• Proficient with CAD, ProE/Creo/Solidworks.
• Good Understanding of the Pneumatics, Computers, controls systems and sensors involved in Electromechanical stage/Robot.
• Strong troubleshooting and analytical skills to support technical issues, set-up experiments, and perform data analysis.
• Ability to read and understand Mechanical drawings and use a variety of precision testing and measuring instruments as needed.
• Experience in semiconductor equipment industry /manufacturing is preferred.
• Team player, Self-driven, Willing to learn.
• Expected to travel up to 20% of the time.

Your Challenge

As a member of the Software Quality Control team, you develop and execute test plans to identify software problems on physical machines and in simulated setups. You are the testing point of contact in Singapore and will work closely together with on-site engineers and developers as well as your software quality control colleagues globally.

The job involves travel to customers and site visits. Your expertise in software testing facilitates on-site problem identification, defect analysis and reporting.

Responsibilities

The regional software quality control engineer, responsible for outgoing software quality in the South East Asia (SEA) region, will have following responsibilities in the Software Quality Control team:

• You develop software test plans according to product specification, customer use cases and end user expectations.
• As experienced test engineer you complete test plans on physical machines and in simulated setups and distribute the tested software to the customer support team with clear release documentation and application notes.
• You document test results and defects experienced during tests.
• You diagnose bugs and closely monitor them from discovery to resolution, by engaging with the engineering and customer support teams.
• In our Singapore factory, you act as a go-to person for the local developers, field support engineers as well as your colleagues around the globe. Joint test execution and problem analysis will be key in this role.
• Occasionally you perform customer visits in the SEA region to support problem solving on site.
• You partner with other engineers to stay informed of new technologies being introduced to ensure system components are designed for testability.

Qualifications

• You have a master’s or bachelor’s degree in engineering with a minimum of 4-year experience in product-based software testing
• Demonstrated understanding of creating effective test procedures and test cases
• Demonstrated experience in executing test procedures and validating against customer requirements
• Experience in test automation and test frameworks is a plus
• Understanding of existing quality control methodologies to apply in your day-to-day job
• Organized, detail oriented, very responsive
• You are dynamic and like to interact with people
• Self-motivated, works well independently and with others

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 8+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.
• o Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
• o Demonstrate skills in unit testing and appreciate the benefits of test suites.
• Demonstrate knowledge of REST API best practices and design guidelines.
• o Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
• o Expected to know the performance, deployment, and security considerations of REST API
• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.
• Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.
• · Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• · Essential to know the fundamentals of containerized applications.
• · Able to work by integrating design with other teams even with insufficient/partial information.
• · Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Develop embedded software/firmware for switched-mode power supplies and battery chargers.
• Prepare code for digital control of power supply/charger, housekeeping functions, and communication.
• Adjust and optimize controller parameters to improve power supply performance.
• Work with the hardware team to meet customer requirements.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders for successful product delivery.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, or PhD with Min. 3 years’ experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Ability to perform digital control of power electronics and other housekeeping functions.
• Proficient in C/C++, MATLAB, and Python.
• Experienced in CC/CV mode control.
• Code ancillary functions such as power supply protection, calibration, and timing requirements.
• Comfortable with digital controllers and DSPs from major vendors.
• Basic hardware tests the ability to perform independent debugging.
• Familiar with automotive communication protocols, e.g. CANbus, OCPP.
• Candidates with the below skillsets will be an added advantage:

1. Familiar with automatic test systems.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Key Responsibilities:

• Develop embedded software/firmware for switched-mode power supplies and battery chargers.
• Prepare code for digital control of power supply/charger, housekeeping functions, and communication.
• Adjust and optimize controller parameters to improve power supply performance.
• Work with the hardware team to meet customer requirements.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders for successful product delivery.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, or PhD with Min. 5 years’ experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Ability to perform digital control of power electronics and other housekeeping functions.
• Proficient in C/C++, MATLAB, and Python.
• Experienced in CC/CV mode control.
• Code ancillary functions such as power supply protection, calibration, and timing requirements.
• Comfortable with digital controllers and DSPs from major vendors.
• Basic hardware tests the ability to perform independent debugging.
• Familiar with automotive communication protocols, e.g. CANbus, OCPP.
• Candidates with the below skillsets will be an added advantage:

1. Familiar with automatic test systems.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Key Responsibilities:

• Develop embedded software/firmware for switched-mode power supplies and battery chargers.
• Prepare code for digital control of power supply/charger, housekeeping functions, and communication.
• Adjust and optimize controller parameters to improve power supply performance.
• Work with the hardware team to meet customer requirements.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders for successful product delivery.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, or PhD with Min. 8 years’ experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Ability to perform digital control of power electronics and other housekeeping functions.
• Proficient in C/C++, MATLAB, and Python.
• Experienced in CC/CV mode control.
• Code ancillary functions such as power supply protection, calibration, and timing requirements.
• Comfortable with digital controllers and DSPs from major vendors.
• Basic hardware tests the ability to perform independent debugging.
• Familiar with automotive communication protocols, e.g. CANbus, OCPP.
• Candidates with the below skillsets will be an added advantage:

1. Familiar with automatic test systems.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Responsibilities

· Design, develop, and maintain web-based applications using modern web technologies and frameworks.

· Write clean, efficient, and well-documented code following best practises and coding standards.

· Implement user interfaces that work seamlessly across different browsers and devices.

· Integrate third-party APIs and services into web applications to enhance functionality and user experience.

· Perform code reviews, testing, and debugging to identify and fix issues, optimize performance, and ensure reliability of web applications.

· Provide technical support and assistance to end-users and other team members as needed.

Qualifications

· Bachelor’s or Master’s degree in Computer Science, Information Technology, or related field.

· Experience working as a Web Developer, Software Engineer, or similar role.

· Proficiency in full-stack web development

· Programming skills in Python and Typescript

· Experience with server-side frameworks such as Django, React, or similar.

· Knowledge of web standards, protocols, and best practices for web development.

· Experience with applying security mechanisms for web applications such as handling certificates and tokens.

· Experience with version control systems such as Git.

· Strong problem-solving and troubleshooting skills.

· Excellent communication and collaboration skills.

Responsibilities

• Participate in the system solution design of next generation multi-core multi-chip AI sub-system that scales beyond 1000s TOPS for high performance computing.
• Perform system validation, use case validation, performance analysis, benchmarking, modeling to identify performance bottlenecks, and system parameters optimization.
• Deliver optimized solutions that meet the demanding requirements of HPC workloads and articulate them effectively across stakeholders ranging from toolchain, software and hardware teams, domain experts, and to technology leadership.
• Collaborate with hardware teams to design and optimize the system's computational components, including processors, accelerators, interconnects, and memory subsystems.
• Collaborate with software developers to define and implement software frameworks, libraries, and tools that maximize performance and productivity on the target HPC architecture.
• Collaborate with domain experts and application developers to understand the unique requirements of specific workloads and propose tailored architectural solutions.

Qualifications

• Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, or related field.
• Good understanding of multiple key technology areas is expected (Camera/Image sensors, Graphics, Audio, Video, Display, AI/ML, Computer Vision, distributed systems, SoC architecture, RTOS).
• Good problem-solving abilities and the ability to analyze and address complex performance and scalability challenges.
• Programming skills in languages such as C, C++, and/or Python.
• Ability to translate and navigate business and customer needs into actionable items for software and hardware development teams.
• Working knowledge with ML frameworks like PyTorch and TensorFlow.
• Working knowledge of ARM and/or RISCV CPU.
• Working knowledge of software stack components, such as compilers, runtime systems, job schedulers, and scientific libraries.

Preferences

• Experience in performance optimization via software-hardware co-design is a plus.
• Experience with engineering tools and workflows for large systems is a plus.
• Experience with SystemC modeling is a plus.
• Working knowledge with ARM and/or RISCV ISA is a plus.
• Working knowledge with FPGA is a plus.
• Working knowledge with OpenCL/CUDA/SYCL programming is a plus.
• Working knowledge of system interconnects like GbE, PCIe, InfiniBand, etc is a plus.
• Working knowledge with RTL design is a plus.

Responsibilities

• Participate in the software design of the runtime software across multi-device and heterogeneity.
• Apply code optimization techniques, ensuring efficient and optimized performance of the runtime software components.
• Participate in architecture definition; collaborate closely with software architect in refining architecture designs.
• Collaborate with silicon and platform bring-up to verify and debug the AI sub-system and its delivered performance.

Qualifications

• Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, or related field.
• 3 years of embedded software design and development on SoCs and/or ASICs.
• Good coding skills in C/C++.
• Good knowledge of SW design patterns.
• Good knowledge of SDLC.
• Good knowledge of RTOS and/or Linux OS.
• Good knowledge of multi-thread and multi-process software design and debugging.
• Experience with embedded system involving multi-core CPU/DSP.
• Knowledge of debuggers (LLDB, GDB) and profilers on heterogeneous hardware system.

Preferences

• Experience with Python is a plus.
• Knowledge of Linux kernel and driver development is a plus.
• Knowledge of CNN and common NN operators/layers like Conv2D, BatchNorm, etc is a plus.
• Knowledge of managing CI/CD pipeline (especially under GitLab) is a plus.
• Knowledge of inference engines such as TFLite, OpenVINO runtime, ONNX runtime, TVM runtime, etc is a plus.
• Knowledge of JTAG debugger and bare-metal bring-up is a plus.
• Knowledge of high-performance domain-specific languages (SYCL/CUDA/OpenCL) is a plus.
• Knowledge of PyTorch or TensorFlow is a plus.
• Knowledge of just-in-time compilation techniques is a plus.

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficiently
• To assist engineers in day-to-day issues

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered(eg. M&E professional services, Green Mark Related work etc.)
• Help to review the works of the engineers assigned to you, with the objective of compliance to local authority requirements coupled with sound engineering principals

REQUIREMENTS :

• Degree in Electrical or Mechanical Engineering or equivalent.
• Minimum 5 years of working experience in M&E consulting firm.
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD / BIM software is an added advantage.
• Provide guidance to junior engineers.
• Able to work as a team, assertive, independant and proactive.

Interested candidates please submit updated resume via “APPLY NOW”.

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

PC Refresh Engineer

We are looking for experienced full-time PC refresh engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3-5 years of IT deskside support experiences.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction.
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficientcy

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered (eg.M&E professional services, Green Mark Related work etc.)

REQUIREMENTS :

• Candidate must possess at least Diploma/Bachelor's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): English
• At least 2 Year(s) of working experience in an M&E Consulting firm.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD/BIM software is an added advantage.
• Able to work as a team, assertive , independent and proactive.
• Candidate without relevant working experience but with good interpersonal skills will be considered.

Interested candidates please submit updated resume via "APPLY NOW".

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Continental Group:

Continental develops pioneering technologies and services for sustainable and connected mobility of people and their goods. Founded in 1871, the technology company offers safe, efficient, intelligent and affordable solutions for vehicles, machines, traffic and transportation. In 2023, Continental generated preliminary sales of €41.4 billion and currently employs around 200,000 people in 56 countries and markets.

ContiTech Group Sector:

ContiTech is one of the world's leading industry experts. Far beyond our roots as a rubber products manufacturer, we offer connected, environment-friendly, safe and convenient industry and service solutions using a range of materials for off-highway applications, on rails and roads, in the air, under and above the ground, in industrial environments, for the food industry and the furniture industry. As a group sector of Continental, ContiTech currently employs more than 40,000 people in 40 countries and regions and is active as a global industrial partner in Asia, Europe, North America and South America.

Job Description

• As Application Engineer for Fluid Handling, you are working on Industry & Energy activities to support Sales Channels in achieving short- and long-term business objectives, increased profit and market growth.
• You're familiar with the specified application for end users & OEs. Provide troubleshooting support and give right recommendations to customers.
• Sensitive to market change, input the innovation direction to Product Development and implement the new product validation both in lab and in field as well as giving the final evaluation.
• Training to customers and internal departments from technical aspects.
• Executes department policies according to input from Head of Application Engineering. Ensures compliance with company policies & procedures.

Qualifications

• Bachelor Degree in Science or Business studies (university/university of applied science)

Additional Information

• 3 years of professional experience in project management, technical sales, application engineering or technical consulting
• Project management experience in major projects, especially in international business environment
• Project management experience specifically within an international business environment is highly desirable
• Experience with fluid handling, hoses, hose fittings, especially in the fields of industrial or energy markets
• Experience working with intercultural and interdisciplinary teams
• Exceptional written and oral communication skills
• Comfortable in public speaking, presentations and training others
• Advanced computer literacy skills, in particular Microsoft Office 365
• Additionally, you will have the ability to build strong relationships with internal and external stakeholders, particularly with external clients.

- Proficiency in construction methods, materials and equipment.

- Skill in planning, budgeting, scheduling project.

- Strong communication skills to interact with clients, contractors and team member.

- Able to use Revit and Autocad for 2D & 3D drawings.

- Responsible for preparation of drawing and design information.

- Genernate shopdrawings, fabrication drawings, as-built drawings and detailed drawing submission.

- Previous experiences as architecture engineer/drafter or similar role preferred.

PC Refresh Engineer

We are looking for experienced full-time PC refresh engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3-5 years of IT deskside support experiences.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

PC Refresh Engineer

We are looking for experienced full-time PC refresh engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3-5 years of IT deskside support experiences.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]