Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

SENIOR ENGINEER, ATCP SCENARIO PLANNING

Job Description

As an Assembly and Test Central Planning (ATCP) Scenario Planning Senior Engineer at Micron Technology Inc., you will play a key role in shaping the AT Manufacturing strategies through robust scenarios analysis and ensuring these are translated to the business plans for execution.

You will partner Site Leaders and key stakeholders across the network in supporting scenarios studies to provide data and options to the Executives for guidance and decision-making.

Assembly and Test (AT) scenario analysis

• Assist in defining and facilitating AT internal scenario studies
• Support financial analysis studies and review outcomes with the Finance teams and key partners, to facilitate decision making
• Translate decision to the business plan for execution

Captive Sites Space Planning

• Monitor Captive Sites’ production space utilization for potential space constrain triggers
• Support space-creation option studies with the Site teams to fulfill business requirements
• Review options with the Executives if capital is needed to help in decision-making
• Support Greenfield analysis as required

Long Range Planning (LRP) Analysis

• Assist in seeking guidance from the Executives on strategic direction; geographical diversification, captive growth, emerging technologies and others
• Work with Model Of Records (MOR) teams and Subject Matter Experts (SMEs) to refresh input parameters
• Collaborate with the Supply Chain to rationalize the volume profile for analysis
• Populate manufacturing tool-count and space needs of the network
• Review and support discussions on strategic plans

Participate and Manage Projects

• Support special projects aligning with the AT Strategic objectives
• Assist with analysis of current and future processes/systems
• Complete tasks by assigned due date
• Communicate status of tasks
• Report issues, risks, changes, and quality concerns to the project manager and team
• Assist with documentation and training needs for new processes

Space Planning

• Drive alignment on space definitions and measurable indices across A/T Sites
• Consolidate and maintain data impacting production space requirements:Production-driven tool footprints
  Non-production driven requirement from multi-functional teams (e.g. RND)
  
• Track and publish Captive Sites’ production space utilization for potential space constrain triggers
• Support and collaborate with multi-functional and Site teams on
• Space utilization efficiency projects
• Space-creation studies to fulfill business requirements
• Serve as a communication liaison between Global Facilities Technology Team (GFTT), Construction team, Site IEs and Facilities, and other relevant partners to ensure alignment on space related scenarios
• Support Greenfield analysis as required
• Support review of space related projects with the Executives if capital is needed to facilitate in decision-making

Ensure a Safe, Compliant, and Ethical Work Environment

• Align with company safety, labor, and ethics policies
• Oversee execution of mandatory training for direct reports
• Encourage a culture of safety and recognize contributions made to supporting a safe work environment
• Participate in process improvement activities
• Identify errors before they get to the next step
• Provide timely feedback when quality, safety, or ethical issues arise
• Follow and support company-wide and department safety procedures to maintain a clean, safe, and accident-free work environment
• Promote high integrity processes that will enable immediate sharing of problems, issues and solutions with management team

Requirement

• Bachelor’s in Engineering, Business, Manufacturing Supply chain or a related field of study
• Minimum 3 years’ experience in Engineering, Planning, Manufacturing or any related field.
• Understand basic factory dynamics and manufacturing configurations
• Experience in utility systems required for production tools and basic skills in Auto-cad will be beneficial
• Knowledge of area process, product flow, and budget impacts (business acumen)
• Excellent oral and written communication skills
• Able to work independently or with a multi-functional team
• Interact with management and executives comfortably

• Maintain and update documents and records on ISO 9001, ISO 14001 AND ISO 13485 system
• Establish and maintain proper documentation control & distribution
• Conduct internal and external audits. Ensure readiness of all sections for both 3rd party certification body and customer audits.
• Liaise with external auditors and certification bodies in conducting audits
• Generate monthly report/summary of OQA rejects, customer returns, RMA, external and internal 8D and revised specs and procedures.
• Review and update Quality Management System procedures to meet the quality system requirements.
• Ensure system compliance & preparations for Management Review
• Review audit findings and develop action plans
• Manage internal and external corrective action reports (CAR)
• Plan and conduct periodic system audits and participate in customer or supplier audits for compliance.
• Maintain and conduct regular review of calibration and preventive maintenance for instruments and equipment.
• Direct and head internal audit programs by reviewing procedures, while recommending improvements for all internal audit policies and procedures
• Perform any other duties, as assigned by superior.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

• Provided Capacity management and IT infrastructure governance for large scale cloud service provider operations.
• Managing several projects in areas of IT infrastructure deployments, consolidations, Compliance, Hosting and Digital transformation across group of companies.
• Providing Storage and backup operation support.
• Documented storage architecture to guarantee capacity met current and forecasted needs.
• Provide Capacity Management/Planning for Cloud Hosting infrastructure.
• Responsible for analyzing capacity utilization/trending and forecast reports to maintain predefined thresholds to ensure risk free smooth operation.

Requirement:

Degree in Information Technology or any related fields.

4+ years of experience in Project Management,Capacity management,server and storage management.

Professional Certification like PMP,ITIL or any related are preferred.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Project Summary

• Work closely with business (research analysts, quantitative strategist, end-users, etc), data engineers, data scientists to implement and support data solutions that support common functions in the data lifecycle, e.g. data onboarding and data distribution.
• Contribute, influence, and validate the design of lifecycle data solutions to ensure they meet both business and operational needs.
• Manage day-to-day operations for lifecycle data solutions such as collation of metadata, analysis of system operations data (e.g. data quality metrics, usage level of data distribution services).
• Perform data access control operations to ensure data ingested and distributed comply with enterprise data governance and data handling standards.
• Function as the Center of Excellence for the common data lifecycle services offered, defining standards and best practices, and designing process workflows to smoothen operationalization and to ensure compliance.
• Monitor, analyze, investigate, and resolve day-to-day operational incidents and provide advisory to users.
• Identify opportunities for continuous improvement in assigned area of work.
• Manage and maintain strong stakeholder relationship to ensure continuous support and knowledge for existing and future data lifecycle needs.

Skillset Requirements

• CAT-1 eligible or cleared candidate is required for this role.
• Possess a degree in Accounting, Finance, Engineering, Computer Science/Information Technology or related fields from recognized tertiary institution.
• At least 5 years of relevant experience in data management, data analytics, and data engineering user. Preferably within investment and banking industry.
• Good understanding of the principles, key controls and processes relating to data management, as well as data integration and data distribution.
• Good knowledge and experience in programming languages such as Python, Java, SQL etc.
• Familiar with data visualization tool (e.g. Tableau, PowerBI) and data virtualization technology such as Denodo is advantageous.
• Good at working with details and is meticulous for operations.
• Able to design and implement solution, and perform code review.
• Experience in Systems Development Life Cycle (SDLC) implementation methodology and/or Agile methodologies like Scrum and Kanban.
• Excellent written and verbal communication skills.
• Strong interpersonal skills and able to interact with diverse stakeholders.
• Agile, fast learner and able to adapt to changes.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 2 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Responsibilities:

• Manage and oversee the day-to-day construction management of the project
• Ensure smooth completion of the project
• Ensure that all civil works are carried out in accordance with contractual requirements and completed on schedule
• Review job specifications and analyse technical drawings
• Plan, arrange and supervise civil and building work activities
• Coordinate work activities with sub-contractors and consultants
• Prepare progress reports, work method statements and forecasts
• Responsible for all aspects of quality procedures, standards and specification
• Develop method statement for the activity including risk assessment, job safety environmental analysis and inspection test plan and checklist based on specifications of the materials.
• Any other duties to be assigned from time to time

Requirements:

• Degree in Civil Engineering
• Possess strong communication, management and organizational skills
• Strong commitment to safety
• Those without relevant working experience training will be provided
• Remuneration will be paid according to experience
• Working location at Jurong Island

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Degree in Civil Engineering/ M&E Engineering

- Mininum 2 - 5 years' experience working in construction industry

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 3 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Primary Objectives of Position

· Lead teams of Senior/Assistant Engineers and Senior/Technicians to carry out overhaul/repair/servicing/testing of Rolling Stock components to meet the daily production requirement.

· Ensure teams comply with all overhaul/repair/servicing/testing requirements and related tasks with approved work instructions, quality procedures, safety and operational procedures, and good maintenance standards.

· Plan and coordinate within teams and other departments/sections to complete the assigned maintenance tasks within an established standard time.

· Ensure the teams have the necessary qualifications and authorization to carry out daily tasks and any assigned tasks.

· Attend necessary skills courses to be able to carry out maintenance and assigned tasks.

· Responsible for the safety, welfare and discipline of the teams.

· Responsible for the upkeep of the teams’ equipment/tools and working environment.

Major Responsibilities

· Responsible for the teams’ quality and standards of the maintenance works within the established standard time and in accordance with the Work Instructions and related procedures to meet the daily production.

· Develop, maintain and update Work Instruction, Risk Assessment, Procedures, Competency Management, Repair Compliance Checklist and Technical Documents relevant to the section.

· Forecast and plan the resources needed by the teams to complete maintenance tasks and assigned tasks timely.

· Conduct regular engagement sessions with the teams to understand the teams better and to feedback on their performance.

· Be familiar with the training, qualifications and authorization to ensure all staff are adequately trained and authorized to support production requirement such as overhead crane operator, forklift driver etc.

The above activities are no means exhaustive and are subjected to amendment whenever is needed

Specific Safety Responsibilities

· To comply with SBST’s Safety, Health and Security Policies

· To ensure technical staff and contractor are competent trained and certified to perform the servicing works.

· To implement and conduct of periodic safety inspection and safety to ensure compliance with the specific standards.

· To ensure that the maintenance and modifications work performed on the equipment and repairable by the workshop is compliance with the safety standards and operating specifications.

· Responsible for the ensuring of the implementation Safety within the team.

Job Specifications

Minimum Education / Qualifications

· Recognized Bachelor's degree in electrical/Electronics/Mechanical/Mechatronics Engineering from a reputable university.

Minimum Years of Relevant Experience

· Preferably at least 3 years of of relevant working experience in systems maintenance/repair/overhaul.

Knowledge/Skills

· Good knowledge in electrical, electronic, mechanical and pneumatic systems of electric train.

· Good fault-finding skills.

· Knowledge on Diagnostic Software packages.

Attributes (functional & leadership competencies)

· Strong troubleshooting and analytic skills.

· Good interpersonal, management and communication skills.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Description:

Responsible for substrate technology roadmap development and substrate technology integration with a focus towards Package Technology Development, Advanced Package Technology, and Package NPI execution. The engineering position works closely with Substrate Suppliers, Assembly Technology Development, and Assembly NPI teams to develop Micron's specifications ensuring a successful launch of new substrate technology. The Substrate Team resides in the Global Design Simulation and Substrate (GDSS) group of the Package Development Engineering organization that is responsible for the design, development, and assembly of Micron's product portfolio; MCP, UFS, SSD BGA, NAND, DRAM, GDDR, LPDDR, and ASIC products. This position will be based in Singapore with primary support to NPI's launched in Singapore, Malaysia, and India.

Candidate must have extensive experience in substrate development and substrate fabrication processes with a working knowledge of packaging assembly and technology, and finally proven customer support skillset. This position requires global support resulting in work hours that support Asia time zone and reports to leadership in the US.

Qualifications:

• The applicant should have a Bachelor of Science degree or higher in Material Engineering, Mechanical Engineering, Chemical Engineering, Electrical or Electronics Engineering or related field with 15+ years of relevant experience.
• Strong influencing and stakeholder management skills - excellent executive communication skills
• Solid track record of collaboration and building and strengthening partnerships
• Excellent analytical and problem-solving skills with the ability to lead and work effectively with a team
• Good english communication skills are required

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 5 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 5 years of ASIC design experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.