Job Description:

• Conduct technical analysis and calculations to ensure system performance and safety.
• Create detailed engineering drawings and specifications for fabrication and installation.
• Conduct product testing and evaluation to ensure compliance with regulatory standards.
• Provide technical support to clients, including troubleshooting, system optimization, and maintenance recommendations.
• Stay up-to-date with industry trends, advancements, and best practices in fire suppression technology.
• Provide technical support to clients, including troubleshooting system issues, conducting inspections, and recommending system upgrades or modifications.
• Troubleshoot and resolve any mechanical issues that arise during the development or manufacturing process.
• Test and evaluate prototypes to ensure functionality, safety, and efficiency.

Requirements:

• Diploma or Degree in Mechanical Engineering or a related field
• Minimum 3 years of experience in mechanical engineering or product design, preferably in fire suppression or a related industry
• Proficiency in computer-aided design (CAD) software and/or Solidworks for creating engineering drawings
• Familiarity with relevant codes, regulations, and standards related to fire suppression systems is an advantage
• Knowledge of manufacturing processes for mechanical components.
• Excellent problem-solving skills and attention to detail.

Job Description:

• Coordinate with production on daily basis to ensure high quality products are produced;
• Develop process improvements to effectively utilize equipment and materials to maximize production;
• Develop operational strategies to achieve production and quality objectives;
• To develop and maintain good lean manufacturing practices like 5S, Poka Yoke at production;
• Responsible for production tooling management;
• Perform engineering analysis to reduce downtime and improve production efficiency;
• Evaluate current production activities and make recommendations for improvements;
• Develop operating instructions and equipment specifications for production activities;
• Provides training and guidance to production technicians and operators periodically;
• Stay current with product specifications, engineering technology and production processes;
• Develop best practices to improve production capacity, and quality;
• Working closely with QA to investigate problems and perform root cause analysis and derive resolutions;
• Keeping abreast of advancements in engineering and production and sharing knowledge with co-workers;
• Any other duties assigned from time to time.

Requirements:

• Able to liase with and conduct trainings for our existing Chinese speaking employees from China and Malaysia;
• Minimum 1 year experience in Manufaturing Environment
• Minimum Qualification level: Diploma in Manufacturing Engineering or equivalent;
• Good communication, interpersonal skills, strong leadership and project management skill;
• Proficiency in MS Office;
• Knowledge in project management, engineering tools & problem-solving methodology is a plus;
• Good knowledge in injection molding is a plus.

Service Support Engineer (SLA)

Tasks:

• Delivers engineering services to customers effectively and on time
• Monitors and maintains customers’ system equipment and performance
• Guides customers through use of equipment safely and effectively
• Explains new features and suggests upgrades to customers
• Builds close relationships with customers
• Generates SLA reports and presents findings to management and customers
• Able to analyze processes and information, identify problems and trends, and develop effective solutions and strategies
• Commitment to providing exceptional service to customers and support to peers
• Resolve conflicts or complaints from customers
• Ability to respond to emergencies on time

Qualifications:

• Hold a diploma/degree in electrical engineering, or relevant engineering in RF
• Willing to travel frequently in the ASEAN region
• Good work ethics and growth mindset
• Open-mindedness and innovative thinking
• Time management skills

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Job Summary

Fugro Satellite Positioning has an immediate opening in the Singapore office for a Network Engineer. This position, as part of a global team, is responsible for implementing and managing a reliable and secure Fugro Data Network in support of real-time Global Navigation Satellite System services.

This will involve hardware and software configuration, monitoring and proactively supporting the daily operation of our Fugro Data Network, including Network Control Center (NCC), Remote sites and Satellite uplink sites.

This role works with the Singapore Network Control Centre personnel and in close collaboration with the USA Network Control Center and additional Fugro Satellite Positioning operational and development personnel worldwide in support of our Global infrastructure.

About the Role:

• Configure and update local/remote routers, install, configure and update software, security patches, licensing and virus scanners on local and remote systems
• Install and reconfigure NCC cabling and hardware and support remote site hardware installation and reconfiguration.
• Monitor Network performance and address issues as appropriate to maintain security and operational capability
• Coordinate planned downtime with Network Operations Manager and/or Operational staff to minimise customer impact
• Determine cause for whole or partial system and/or network downtime and implement solutions to improve availability
• Participate in an after-hours support roster for NCC operations

Key Contacts (Internal):

Work with the Network Operations Manager and / or technical staff to design and implement a data handling infrastructure incorporating reference stations, Network Control Centres, disaster recovery sites and uplinks appropriate to the current and future needs of the Fugro Data Network.

About you:

Education: College coursework in information technology required; degree in computer networking systems, IT or computer science preferred.

Working experience: 0-3 years

License/ certification/ qualification: CCNA qualified. In depth understanding of Linux, Windows and data networks.

Languages & Proficiency: English, Proficient

Other: Understanding of current and emerging data communications technologies

What we offer

Competitive salary with Annual Wage Supplement

Generous paid-leave

Career & training opportunities (international opportunities possible)

Company shuttle from various pick-up at MRT stations across Singapore

Collective health insurance and outpatient benefits;

Employee Assistance Programme (EAP) to provide help when you need extra support.

Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.

How to apply

· Please include your latest resume in the application.

· Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).

· We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

Job Responsibilities

· Design and implement software of embedded devices and systems for commercial deployment.

· Develop codes for product firmware and conduct design review and code review to obtain design approvals.

· Develop technical specifications and identify technical challenges and resolve issues.

· Test and qualify firmware module for integration.

· Perform technical root cause analysis and outlines corrective action for given problems.

· Drive technology/development projects in all phrases from specification to release

Pre-requisites

· Degree in Electronic/Electrical/Computer Engineering/Computer Science, Software Engineering or related fields.

· Minimum 3 to 5 years’ experience in real time embedded system and firmware.

· Strong knowledge of software development quality management systems, quantitative, analytical and problem-solving skills

· Good knowledge of microprocessor and microcontroller architecture.

· Excellent teamwork skills, flexibility and ability to handle multiple tasks.

· Good interpersonal and communication skills.

· Able to work independently with positive disposition.

Additional Information

Career Level

Junior Executive

Qualification

Bachelor's Degree, Post Graduate Diploma, Professional Degree

Years of Experience

3 years

Job Type

Full-Time

Job Specializations

Computer/Information Technology, IT-Network/Sys/DB Admin

Company Overview

Trek Technology (S) Pte Ltd is a subsidiary of Trek2000 International Ltd, an industry leader, innovator, original inventor and patent owner of the ThumbDrive® (i.e. USB Flash Drive) offers state-of-the-art design solutions ranging from Mobile Media Solutions, Wireless, Antipiracy, Compression and Encryption to sophisticated Enterprise Solutions all catering to the fast changing digital industry.

Trek with its library of granted patents is represented all over the world and has offices in the U.S., Malaysia, Thailand, India, Hong Kong, Singapore, the Netherlands, China, the Philippines, Vietnam, Cambodia and Japan to serve the rapidly expanding markets across all regions.

As part of a public listed company whose shares are quoted on the Singapore Stock Exchange (SGX:Trek), Trek was named by Forbes Global as one of the Best Small Companies in the World of 2000 and 2002. Trek 2000 International Ltd was also ranked as the Best Managed small Company in Singapore by AsiaMoney (of Euromoney). Trek also received the INVENT Singapore AWARD 2008; the ASEAN BUSINESS AWARDS for Innovation in 2011 and ASIA-PACIFIC ENTERPRISE LEADERSHIP AWARDS for Spirit of Innovation Award in 2013.

Trek®, ThumbDrive®, DivaDrive® and FluCard® are trademarks or registered trademarks of Trek Group of Companies in Singapore and / or other countries.

For more information, visit our website at http://www.trek2000.com.sg, http://www.thumbdrive.com, http://www.flu-card.com.

Key Responsibilities

• Design, collect data, analyze and compile reports on a variety of difficult process engineering experiments, within safety guidelines
• Perform hardware characterization on a variety of difficult systems, within safety guidelines
• Troubleshoot a variety of complex problems, perform Root Cause Analysis and resolve a variety of difficult process engineering issues
• Generate internal and external documentation for products, presentations and technical reports
• Interact with customers to resolve a variety of difficult process engineering issues/problems with limited supervision
• Measure film properties and interpret data
• Identify, select and work with vendors and suppliers with limited supervision
• Implement new technology, products and analytical instrumentation

Requirements

• Master’s or PHD degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience with Plasma Etch process development
• ​Bachelor with 5+ years relevant working experience

Working Location

• Science Park II

Key Job Accountabilities:

· Liaison with customer reps on documentation procedures including certification and maintenance release.

· Ensure all aircraft have valid documents such as Certificate of Registration, Certificate Of Airworthiness, Radio License, Insurance Certificate, etc as applicable.

· Conduct quality internal audits as scheduled by the Quality Audit Plan or as instructed by the Manager Quality.

· Carry out investigation into incidents, accidents,customer compliants and warranty claims.

· Carry out surveillance inspections at various stages of aircraft work in progress for correct maintenance practices, good housekeeping and proper documentation.

· Assist in the evaluation of new or amendments as appropriate of new or changes to existing contracted operators’ interface procedures.

· Carry out Airworthiness Directives review.

· Monitor and track contracted operators’ surveillance follow up action to closure.

· To consolidate the aircraft surveillance and investigation KPI on the program assigned.

· Any other duties as assigned by the Quality Manager.

Required Experience and Qualifications:

• Hold an Aircraft Maintenance Engineer’s License (AMEL) issued by the civil Aviation Authority of Singapore (CAAS) or a foreign equivalent license recognized by CAAS or an FAA A&P certificate or professional licenses relating to aviation.
• Minimum five years working experience in aviation industry.
• Shall possess Diploma in engineering or equivalent.
• Conversant with Airworthiness requirements and / or Quality Management System (AS9110).
• Able to perform internal and external quality audits is an added advantage.
• Strong knowledge of Microsoft Office applications.
• Excellent verbal and written communication skills.
• Able to work independently and in a team environment

Job Description

· To provide support and application for Wafer Sort & Testing Related Equipment.

· Service & Calibration of Hi Vacuum Pumps and related equipment for the semiconductor industry.

Qualifications / Requirement

· Diploma in Electrical / Electronic Engineering.

· Preferably with experience in Vacuum Technology and/or Wafer Testing.

· Excellent written and verbal communication skills, customer service oriented, self-motivated and able to work independently.

· Result oriented and able to work well under pressure.

· Travelling required.

Job Description

Key Responsibilities

Forecasts financial, manpower, and operational requirements for key businesses (start up, warranty, service agreements, paid service). Identifies and pursues service agreement business in conjunction with marketing and sales.

Manages start ups in terms of time and cost requirements. Manages local inventories and RMA procedure. Maintains DSO according to goal. Manages systems start up and warranty cost under reserve.

Ensures customer satisfaction with Company service and system performance.

Interviews, hires, and trains customer engineers as necessary to support regional business.

Ensures employee satisfaction through:

- communication of business progress and all related action.

- setting goals and controlling achievements.

- establishing training and career development plans.

Ensures the appropriate safety practices among customer engineers. Develop CE skills. Spots and develops managerial/other specialist talent. Ensures employee satisfaction through:

Escalates system downs according to valid escalation procedure, to ensure earliest possible return to service. Reports in a timely and accurate manner as required.

Achieves guaranteed up time and other parameters as sold to customers.

Promotes quality improvement processes to:

- reduce cycle time

- drive continuous improvement of technical performance

- empower the work force

Functional Knowledge

• Demonstrates in-depth understanding of concepts, theories and principles in own job family and basic knowledge of other related job families

Business Expertise

• Applies understanding of the industry and how own area contributes to the achievement of objectives

Leadership

• Manages a generally homogeneous team; adapts plans and priorities to meet service and/or operational challenges

Problem Solving

• Identifies and resolves technical, operational and organizational problems

Impact

• Impacts the level of service and the team’s ability to meet quality, volume, and timeliness objectives
• Guided by policies and resource requirements within business unit, department or sub-function

Interpersonal Skills

• Guides, influences and persuades others internally in related areas or externally

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

JOB RESPONSIBILITIES

· Lead new product and manufacturing transfer activities, setup of medical device service & repair facility

· Implement new production / service/ project initiative and manage budget and timeline.

· Liaise with customer on all new product development/ service & repair activities

· Perform intermediary role between Research & Development (R&D) & manufacturing and service & repair.

· Lead and provide direction to Cross Functional Team.

· Champion to lead & develop from First Article / prototypes to customer's approval.

· Work closely with Supplier Chain, Operations & Quality on supplier qualification, Process Failure Mode Effects Analysis (PFMEA), equipment qualification and process validation, establish service & repair processes

· Perform other tasks as assigned by the supervisors.

JOB REQUIREMENTS

· Minimum Degree in Engineering

· Minimum 3 years of relevant working experience

· Experience in NPI & Project Management

· Familiar with the requirement of medical device service & repair center and its operating process

· Project Management skill

· Communication and leadership skills

· Problem Solving and decision-making skills

· MS Project skill

· Process Failure Mode Effects Analysis (PFMEA) and process validation skill

JOB RESPONSIBILITIES

· Lead new product and manufacturing transfer activities, setup of medical device service & repair facility

· Implement new production / service/ project initiative and manage budget and timeline.

· Liaise with customer on all new product development/ service & repair activities

· Perform intermediary role between Research & Development (R&D) & manufacturing and service & repair.

· Lead and provide direction to Cross Functional Team.

· Champion to lead & develop from First Article / prototypes to customer's approval.

· Work closely with Supplier Chain, Operations & Quality on supplier qualification, Process Failure Mode Effects Analysis (PFMEA), equipment qualification and process validation, establish service & repair processes

· Perform other tasks as assigned by the supervisors.

JOB REQUIREMENTS

· Minimum Degree in Engineering

· Minimum 3 years of relevant working experience

· Experience in NPI & Project Management

· Familiar with the requirement of medical device service & repair center and its operating process

· Project Management skill

· Communication and leadership skills

· Problem Solving and decision-making skills

· MS Project skill

· Process Failure Mode Effects Analysis (PFMEA) and process validation skill

Job Description

Key Responsibilities

1. Forecasts financial, manpower, and operational requirements for key businesses (start up, warranty, service agreements, paid service). Identifies and pursues service agreement business in conjunction with marketing and sales.
2. Manages start ups in terms of time and cost requirements. Manages local inventories and RMA procedure. Maintains DSO according to goal. Manages systems start up and warranty cost under reserve.
3. Ensures customer satisfaction with Company service and system performance.
4. Interviews, hires, and trains customer engineers as necessary to support regional business.
5. Ensures employee satisfaction through:- communication of business progress and all related action.- setting goals and controlling achievements.- establishing training and career development plans.Ensures the appropriate safety practices among customer engineers. Develop CE skills. Spots and develops managerial/other specialist talent. Ensures employee satisfaction through:
6. Escalates system downs according to valid escalation procedure, to ensure earliest possible return to service. Reports in a timely and accurate manner as required.
7. Achieves guaranteed up time and other parameters as sold to customers.
8. Promotes quality improvement processes to:- reduce cycle time- drive continuous improvement of technical performance- empower the work force

Functional Knowledge

• Demonstrates in-depth understanding of concepts, theories and principles in own job family and basic knowledge of other related job families

Business Expertise

• Applies understanding of the industry and how own area contributes to the achievement of objectives

Leadership

• Manages a generally homogeneous team; adapts plans and priorities to meet service and/or operational challenges

Problem Solving

• Identifies and resolves technical, operational and organizational problems

Impact

• Impacts the level of service and the team’s ability to meet quality, volume, and timeliness objectives
• Guided by policies and resource requirements within business unit, department or sub-function

Interpersonal Skills

• Guides, influences and persuades others internally in related areas or externally

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

Responsibilities:

• Prepare and evaluate equipment to be used in on-site troubleshooting and analysis
• Review work order and related documentation to determine tasks to be performed in the troubleshooting assignment
• Discuss assignment with internal technical representatives and customer’s representative to understand the nature of the problem and ensure that the product was properly assembled according to specifications
• Assist with coordinating the installation of hardware as required
• Test mechanical and electrical components, using the appropriate tools, and replace faulty components as necessary
• Track and trend on-site problem detection and resolution
• May train customer’s staff as required
• Make technical recommendations on product improvement, reliability and troubleshooting techniques and tools based on product performance
• Work closely with senior engineers on the resolution of the more complex and difficult problems in the field
• Train lower level technicians
• Monitor processes and assemblies for product Design for Manufacturability (DFM) issues and drive feedback through appropriate channels
• All employees are responsible for the Quality of their work to ensure BEI meets, or exceeds Customer Satisfaction

Requirements:

• Nitec/ Higher Nitec in Engineering with 1 -2 years of relevant experience. Fresh Graduates are welcome to apply
• Diploma in Engineering with few years of relevant experience will be considered for Engineer position

Responsibilities

> In-depth study, support and development of new technology and

capability improvement

> Design test vehicle, conduct DOE, data collection and analysis

> Liaise with vendor for evaluation and prepare technical report

> Co-ordinate with varies department for new technology

introduction

> Monitor initial mass production performance, resolve issues and

make improvement plan

Requirements

1. Degree in Engineering (Mechanical / Chemical / Electrical &

Electronics) with 3 years’ experience in a manufacturing

environment

2. Strong in Engineering concepts and fundamentals

3. Knowledge of statistical and analytical tools – SPC, PFMEA, DOE

4. Good writing, communication, planning and co-ordination skill

5. Knowledge of PCB manufacturing will be preferred

Responsibilities

> Study and evaluate new method and materials to improve current

process and manufacturing capability

> Conduct DOE to determine the key process parameters and

product characteristic

> Assist production in setting up machine operation procedure and

safety guidelines

> Implement new process

> Explore possibility of reducing material standard usage or cheaper

source

> Determine the root cause for sample rejection for process related

issue

Requirements

1. Degree in Chemical/Mechanical/Electrical/Materials Engineering or

Diploma with 2 to 3 years working experience

2. Good trouble shooting and analytical skills

3. Independent, creative, resourceful and able to take pressure

4. Good communication, report writing and presentation skills

5. Fresh graduates are welcome as training will be provided

Job Description

• Working out of estimates for the proposed work
• Putting up traffic control / division plan for work
• Taking and scheming of road levels where required
• Picking up manhole details and existing traffic lines or schemes on the road
• Submit the detailed calculation and plans to the SO
• Do site measurement and prepare job measurement sheets for payment of completed works
• Attend monthly progress payment, operation meeting and other meetings required at LTA office
• Ensure that all plant and equipment are in good working condition and the temporary signing arrangement at site is in accordance with the Code of Practice for Traffic Control at Work Zone (Latest Edition) before the commencement works
• Plan and ensure the smooth operation of the work
• Ensure that the work carried out is according to the Contract Specifications
• Submit weekly progress report on Provisional Quantities, Planned Jobs, Provisional Sum and other duties as assigned by the SO

Job Requirements

• At least 3 yearS experience of relevant supervision experience in road and road structure construction
• Degree in Civil Engineering recognised by Professional Engineers (PE) Board or qualifications acceptable by the Commissioner of Building Control for the registration as Resident Engineer or as accepted by the SO

Job Description

Key Responsibilities

1. Complete definition and design of complex components, modules and sub systems. Contribute to the system engineering specification both within the field of one's expertise and broadening into other disciplines. Ensure designs meet market requirement specifications (MRS). Coordinate with project marketing and management to understand sub system requirements. Be able to chair architecture brainstorming meetings and drive the systems process to down select to a final architecture of a subsystem.
2. Conduct detailed engineering analysis of sub systems using vast knowledge of design concepts and functional requirements pertaining to field of technical expertise and broadening into other disciplines. Assist in creating concepts for architectural design approaches. Evaluate architectures to provide recommendation for best system solution approach.
3. Build and qualify prototypes of new designs, or procure entire subsystems from outsourced suppliers and test for compliance with detailed specifications
4. Problem identification and troubleshooting a variety of difficult engineering problems in field of technical expertise, including serviceability and manufacturability.
5. Support System Integration during the assembly and final testing of new product designs.
6. Perform and coordinate tests as per internal as well as industry-accepted reliability specifications. Make suitable design or operational changes as required.
7. Support system engineering projects that have a substantial mix of electrical, mechanical, physics, algorithms and software design, and understand the underlying system implications.
8. Provide remote and onsite support to field support personnel as required.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job Description

Key Responsibilities

• Owns product change management (PCM) and controlUnreleased product approval and control
  ECO (Engineering Change Order) approval
  Implementation of PCN (Part Change Notification), with Global Product Support
  Provides guidance/input to Engineering and the Business Unit about the field service impact of part/supplier changes.
  
• Accuracy of customer shipped configurations and BOMs (Bill of Materials)CaRM (Configuration accuracy Review Meeting) reviews
  BOM (Bill of Materials) accuracy
  
  NSR (Non Standard Request) approval
• Owns common modules roadmap and implementation post Phase 5 of ePLC.
• Implementation of component roadmaps including part obsolescence, replacements, alternative vendors and cost reduction
• Facilitates Intercompany communication to align on product strategies, provide guidance on pricing, spare level contents, and restricted part orders. Facilitates alignment meeting for product roadmap and market proliferation
• Implementation of cost reduction roadmap
• Manage strategic vendor issues
• Manage all changes to the product after product release
  whether driven by engineering, quality, safety, customer demands or supply obsolesce

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

We are looking for a motivated individual with a passion for the aviation industry and a keen interest in the spearheading the digital transformation efforts of Changi Airport Group (CAG). You will be driving the development of our consumer applications that will transform our business and bring customer experience to greater heights. You are likely to possess a sharp business mind and a proven ability to project manage the delivery of high-quality technical solutions that drive key business strategies. You will guide functional development teams, both within and outside of CAG, through all phases of the product development process, from discovery, through development, to product launch.

Job Responsibilities
• Assist the product management leads to identify project milestones, align requirements, identify risks and coordinate resources
• Managing project progress and adapting to changes as required
• Ensuring that projects are delivered in accordance with agreed timelines and resources
• Managing relationships with internal development teams, stakeholders and external vendors
• Overseeing all incoming and outgoing project documentation
• Managing project costs, including procurement activities
• Participation in tender process (eg design, submission and review) where necessary
• Participation in internal data protection risk assessments and developing risk mitigation plans
• Working with product owners to conducting project reviews and creating reports for management reviews
• Working with various tech and business teams to optimise and improve processes and overall approach where necessary

Job Requirements

• Degree in Business / Data Analytics / Economics / Information Technology / Information Systems / Computer Science or a related field preferred
• Have at least 4-6 years of digital project management experience using Agile methodology (SCRUM preferred)
• Experience in managing Adobe Experience Manager-based portal rollouts and maintenance, good understanding of all AEM building blocks including templates, components and dialogs is highly preferred (*please elaborate on your experience with AEM if you have*)
• Strong organisation and stakeholder management skills
• Proven track record in managing medium to large-scale digital project deliveries
• Ability to solve problems creatively and effectively
• Results and customer oriented
• A good team player that is resourceful and able to work independently
• Ability to multi-task and thrive in a dynamic and fast paced environment
• Motivated and driven, with a curiosity and openness to constantly look for new solutions and ways of working to tackle new challenges
• Excellent written and verbal communication skills.
• Able to communicate with both technical and non-technical audiences

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Other Requirements: This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Key Responsibilities

• Key Product Unit, Process engineer for bump/FOWLP metallization product development at Applied Product Development Center (APDC).
• Product development include Degas, PreClean and PVD technology, required to design, collect data, analyze and compile reports on moderately difficult experiments, within safety guidelines. Generate internal documentation for products, presentations and technical reports.
• Perform new hardware characterization, tool issue troubleshooting, on moderately difficult systems, within safety guidelines. Basic hardware knowledge required.
• Troubleshoot moderately complex problems, perform Root Cause Analysis and resolve moderately difficult engineering issues
• Interact with customers to resolve moderately difficult engineering issues/problems.
• Implement new technology, products and analytical instrumentation

Requirements:

• PhD/ Master/ Bachelor in relevant Engineering/ Science/ Physics studies
• Candidate with minimum prior experiences to few years experiences are welcome to apply
• Understanding of semiconductor process and industry is compulsory
• Resourceful, meticulous and problem-solving attitude

Working Location:

• Science Park II

Job Description & Requirements:

• Ensure that all products are manufactured with utmost efficiency and quality, according to planned protocols using the appropriate technology. Evaluates, products, components and applications by designing and conducting researching programs, applying knowledge of project and materials
• Develops products by studying customers' requirements, researching and testing manufacturing and assembly methods and materials
• Assures products' quality by designing finished products
• Prepare report by collecting, analyzing and summarizing information trend
• Guide assembly of automation module / machine according to mechanical assembly drawing, and electrical schematic diagram
• Able to interpret well on mechanical drawings, assembly drawings and electrical schematic diagrams
• Guide and improve the production performance of the department together with Manufacturing Manager (quality, lead-time, delivery performance, costs)
• Work closely with the Quality department to assure conformity of product to customer requirement
• Monitor and adjust production processes or equipment for quality and productivity
• Other responsibilities that may be assigned from time to time
• Perform ad-hoc tasks when requested

Requirements:

• Degree / Diploma in Mechanical/Electrical/Mechatronics
• 1-4 years of relevant experience preferably in Assembly of Equipment or Test area preferably in Semiconductor Industry
• Experience in maintaining the Quality of Work
• Knowledge of Material BOM’s
• Capable of understanding Engineering drawings for Mechatronics-assembly
• Experienced in Manufacturing Engineering Tools (5S, Process Flow, FMEA, System Risk Analysis, DMAIC, 8D, Control Plan, SOP, SOO, Work Instructions, Root Cause Analysis, Capacity versus Demand)
• Experience in Mechanical Fitting, Cable Routing and Installation of Equipment. Preferably in a Semiconductor Equipment Industry.
• Able to use Solid works to design simple fixtures / jigs
• Technical skills must include basic knowledge of mechanical/Electrical/Mechatronics
• Ability to work independently with minimal supervision

Site Testing Engineer

Job Description

• Lead the assigned dedicated work scope of Test and Commissioning
• Conduct all required Test Procedure, Methodology & equipment testing activities in site related to project to obtain sign-off from Customer.
• Preparation of technical proposals (testing and commissioning) for submission to LTA Singapore.
• To arrange all test equipment required for testing in coordination with site Manager & team leader.
• Mobilization of required test equipment arranged and made ready to commence testing in time.
• Coordinate and liaise with Customers on application of Permit-To-Work for testing activities for approved proceedings.
• Prepare and compile test report for submission to customer
• Prepare and draft Method Statement Risk Assessment.
• Supervise and monitor the site test activities at each specific T&C work.
• Provide support to team leaders and site engineers in all safety related requirement.
• Develops test plans and test procedures for Site Acceptance Test (SAT), Interface test (IFT) and System Integration Test (SIT).
• Plan scheduling and job allocation for activities (to coordinate with Planner)
• Participation in technical discussion and report preparation.
• Organizing training programs.
• Maintain and ensure line clear after each deployment and the site is always neat and tidy,

Requirements

• Minimum Diploma in Electrical Engineering or Mechanical Engineering.
• Fresh graduates are welcome
• Able to understand the regulation and requirement of local electrical practice and SMRT/ LTA requirements.
• Computer literacy
• Able to prepare Test Procedure and relevant technical document.
• Able to learn and pick up cut-in/cut-out of circuits for new systems or reroute cables / systems that requires test and commissioning.
• Willing to work in night shifts and on call duty.
• Positive work attitude
• Team Player

Function Description

This position serves both Business Development and Service & Support. The position requires detailed knowledge of flight simulation equipment, maintenance, and operation, as well as Collins image generators and display systems. Experience within the Asia-Pacific region and especially with China airlines, training centers, and training device manufacturers is also required. This position works as part of the business development team to identify and follow market opportunities, clarify customer requirements, organize proposal submissions, and conduct contract negotiations. Detailed process knowledge of Collins service and support, and business development workflows and systems is desired.

Performs duties related to overall customer service including post-sales support. May support sales team by notifying other divisions of customer concerns and trends. Responsible for maintaining quality and consistency of service by documenting and identifying trends in customer service needs. Performs on-site services for Aftermarket clients, installs new equipment and services, maintains / services and upgrades existing equipment. Provides instruction and education regarding products or equipment usage to customers and internal employees. Designs and manages product training for customers and staff.

Discipline Description
Coordinates with Customer Service representatives to identify customer training and support needs. Resolves issues surrounding installation, usage, upgrade and training on products. Provides on-site support as needed. May resolve technical problems in a call center/help desk environment or through customer escalation. Completes proper documentation of issues.

Organization Level Description
• Implements functional strategy.
• Establishes operational plans for work area.
• Recognized master within discipline, having deep knowledge of theory and organizational practices within a specific discipline.
• Problems faced are typically complex.
• Develops and implements new products, processes, standards or operational plans that will have impact on the achievement of functional results.
• Significantly improves on existing processes and practices.

Typically requires a University Degree or equivalent experience and minimum 10 years of prior relevant experience or, an
Advanced Degree in a related field and minimum 7 years experience.

Familiarization and experience with regulatory authorities is required.

Purpose
Senior Product and Technical Service professional with significant experience. Implements customer support strategy. Works with leadership and Customer Service representatives to develop and execute effective support programs in alignment with projected changes in production processes, equipment upgrades, and/or other product strategy.
Responsibility Statements Subject matter expert for multiple products and services.
Operational lead for complex customer technical matters. Work with Customer Service to review effectiveness of technical support activities and identify customer training and support
needs. Responsible for improvements to product and technical service programs and offerings in alignment with production processes, product changes, and other factors. Direct implementation of product and technical services.

Authorities and Responsibilities

To interpret technical drawing and performing machining, sheetmetal process and requirement to produce the work piece.
To perform machine code programming with 3D modelling/knowledge of Auto Cad, solid works, others.
To operate, set up parts and producing parts as per drawing specification..
Guiding and providing operator/machinist with basic instruction in operating the machines.
Design jigs & fixtures for machining, sheetmetal, Robot welding process and good knowledge in understand of manufacturing aspect include re-design.
To responsible of all production mechanical related product matter and troubleshoot on dimensions non-conformance, and provide corrective actions and remedy.
To participate in Mfg/Production Engineering activities to improve quality process, waste, efficiency and cost.
To participate in failure analysis, recommend appropriate corrective/preventive technical action (if any).
To perform other similar or related duties as directed by superior from time to time
Competence Requirement:-

1. Min. ITE-NTEC/Diploma/Degree level PE/ME/Mfg/Mechatronics or its related discipline.

2. Fresh graduate/ Degree or 3-5 years in relevant experience in related field

3. Able to interpret technical drawings, and having machining knowledge.

4. Possess good analytical, verbal or written and interpersonal skills