Primary:

To provide creative and operational elements of Audio in broadcast standard environment for all TV Production, OB and Studios events.

Responsibilities:

• Assist in planning and the execution of the audio plan to develop the appropriate audio requirement for TV production.
• Assist in handling of basic TV broadcast Mix Audio operations, Front-of-House (FOH) & Stage monitoring operation and ensure consistent audio quality during live and recorded productions.
• Maintain proper records/inventory of the sound equipment and follow up on equipment under repair.

Qualifications:

• NITEC in Electronics/Electrical Engineering/Audio/Video Field or Diploma in Audio Engineering / Film, Sound and Video.
• Willing to work on shifts.
• Experience in setting up sound system.
• Experienced in Audio Mixing and Recording Operation.
• Experience in the Maintenance of audio equipment.
• Strong Communication skills and Problem Solving.

Responsibilities

• Responsible for developing applications for projects including graphics, reports and calculations
• Responsible in conducting internal testing and acceptance tests and user training
• Responsible for preparing documentation including design specifications and manuals
• Responsible for providing high quality technical support to our customer
• Responsible for conducting onsite routine health check of the systems installed at customer base and documenting troubleshooting and problem resolution steps

Requirements

• Min Diploma in Computer Science or relevant
• Min 2 years of working experience in Project Management in SI Industry
• Proficiency in programming like Visual Studio, ASP and Java, MS Office with VBA and industrial automation is an advantage
• Knowledge in Microsoft SharePoint 2007/2010 (MOSS/WSS) is an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for inventory management ensuring the inventory is in healthy & good condition.
• Responsible for coordinating with manufacturing Plants and respective Supply Chain Management team to ensure materials and services are being delivered to the respective designation on time and in full (OTIF).
• Responsible for raising material/purchase requisition promptly and monitor the delivery status to ensure delivery is on-time and stock-out
• Responsible for Production Planning and Scheduling process and administrative handling.
• Responsible for performing material planning (MRP/JIT), sub-contracting and execution of raw material resources for Sales Order to meet on time and in full delivery (OTIF).

Requirements

• Min Diploma in Engineering, Supply Chain or Business
• Min 3 years of working experience in Production/ Material Planning in Manufacturing/ Oil&Gas/ Precision industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Overview

In collaboration between Singapore Airlines (2023 World's Best Airline*) and the National University of Singapore (Top 10 universities globally*), the SIA-NUS Digital Aviation Corp Lab was established, with support from the National Research Foundation, Singapore. SIA-NUS Digital Aviation Corp Lab aims to create innovative technologies that accelerate digital transformation, redefine air travel, and enhance safety and security.

We are seeking a highly motivated and skilled Research Engineer to join our team in the field of Virtual/Augmented Reality (VR/AR) and Large Language Models (LLMs) for Pilot Simulation Training. This position offers an exciting opportunity to contribute to cutting-edge research and development in the aviation industry, with a focus on leveraging VR/AR and LLM technologies for pilot competency based simulation training.

Responsibilities

• Conduct research on the application of VR/AR and Large Language Models in pilot simulation training, aiming to enhance realism, interactivity, and instructional effectiveness.
• Collaborate with a multidisciplinary team of engineers, data scientists, and aviation experts to define research objectives and develop innovative approaches for integrating VR/AR and LLM technologies into pilot training simulations.
• Design and develop VR/AR-based training environments that utilize LLMs to generate dynamic and realistic dialogue interactions for pilot-instructor communication, scenario-based training, and decision-making exercises.
• Conduct usability studies. Collect and analyze data from VR/AR simulations and pilot training scenarios to evaluate the effectiveness and performance of the simulation modalities.
• Provide guidance and mentorship to junior researchers, graduate and undergraduate students, or research assistants. Publish research findings in prestigious journals and present at conferences and industry events to contribute to the scientific community and promote advancements in VR/AR, LLMs and pilot simulation training.

Requirements

• Bachelor degree in Computer Science, Electrical and Computer Engineering or a related field, with a focus on VR/AR, Natural Language Processing, or Human-Computer Interaction.
• Strong background and research experience in VR/AR, Large Language Models, or related fields, demonstrated through high-quality publications in reputable conferences or journals.
• Proficiency in programming languages commonly used in VR/AR and LLM research, such as Python, C++/C#, or Unity.
• Experience with VR/AR hardware and software platforms.
• Familiarity with state-of-the-art Large Language Models, such as GPT-4 or similar architectures, and their applications in natural language processing tasks.
• Strong analytical and problem-solving skills, with the ability to think creatively and develop innovative solutions.
• Excellent communication skills, both written and verbal, to effectively convey research findings and collaborate with cross-functional teams.

Join our dynamic and innovative team, where you will have the opportunity to revolutionize pilot simulation training using VR/AR and Large Language Models.

* Singapore Airlines has been named Airline of the Year at the Skytrax World Airline Awards 2023. NUS ranks eighth in the world (first in Asia) in the Quacquarelli Symonds (QS) World University Rankings (WUR) 2024.

Job Purpose:

- Responsible for developing activities, within the I&C discipline, focusing on long term strategies, governance of technical guidelines, projects and action plans. This includes evaluation and identifications of improvements on business value, compliance and technical safety in order for the fleet performance improvement considering best practices in all MODEC Group shared as common practices as well as to promote research and development.

Core Responsibilities:

Contribute to continuous improvement of IMS by following and filling in projects status, updating and monitoring implementation of IMS documnets under I&C discipline.

Support MdB`s corporate annual budget planning for E& I&C coordination by providng information based on previuos experiences,technical knowledge and best practices in the market.

Contribute to MODEC`s participation in biddings of project by supporting preparation / develpment together with MOPS/MII/MINC/Pre Ops Team by bringing technical and operational experiences to new project in develpment.

Ensure knowledge management, which includes mjonitoring its starts, actions taken, knowledge database maintenance, as well as auditing inclusion of forms in the system by sharing lessons learned among MODEC Ops Fleet and subsidary company, being responsible for exteacting and listing up all lessons learned from operations experience and evaluating and reviewing feedbacks in MIMS.

Ensure technical support to Tier 2 Reliability for specific case to be defined by proper procedure(boundary scope) by responding to MOCs. TQs, RCAs, CAPA , NOI and safety studies recommendations upon request anddeveloping recommendations/solutions when necessary.

Contribute fordeveloping and maintaining Global Design Philosophy & Functinal Specifications by reviewing and or updating each assigned documents.

Develop and improve all the technical / business lifecycle guide/process/procedures from BID, EPCI, Pre Ops, operation, maintenance and decommissioning, by actively particiapting on all phase of projects, constantly monitoring and analyzing all standards and guideline defined for the I&C discpline, as well as proposing and elaborating actions plans for the technical Recommendations received from other Tiers.

Maximize business life cycle value and ensure fleet performance improvement by developing and researching new technologies, controllling KPI`s results, monitoring the resoulution of issues related to the I&C discipline and deceloping actions plans of continouous improvement through systematic approach and methodology following MODEC technical philosophy.

Qualifications and Requirements:

Bach degree in Engineering is required

Masters Degree / Post grad in areas related to discipline of expertise has an addtional advantage.

CREA certifications is required.

Minium 7 years of overall experiences in Offshore / onshore Oil&Gass area is required.

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

· Recipe creation and optimisation for new R&D applications requirement.
- Preventive and corrective maintenance planning cum execution and vendor management.

· To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up

· Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).

· To set-up appropriate process and product control plan and out of control action plans (OCAP)

· Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

· Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering

· Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)

· Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)

· Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

Job Description

• Inspecting incoming and outgoing materials along with finished goods.
• Compiling FA (First Article) and outgoing reports.
• Ensuring compliance with drawing specifications for all parts.
• Documenting and addressing non-conformance issues.
• Managing the calibration of measuring equipment, jigs, and fixtures.

Requirements

• Possession of a Certificate in Mechanical Engineering or its equivalent.
• Familiarity with various measuring instruments.
• Fresh graduates or individuals without similar experience are encouraged to apply; training will be provided.

PLASTICS ENGINEER Responsible for designing and developing materials and other goods made with plastics. Creates specifications, establishes manufacturing control plans, and designs pieces and parts.

Plastics engineers develop and test new plastics, known as polymers, for new Products

(We manufacture of EG POLYTHENE Products AND POLYPROPYLENE BAGS)

Responsibilities

• Design plastics or injection-mold fabrication processes.
• Create and improve injection-mold machinery.
• Research and develop new manufacturing processes.
• Analyze manufacturing data and suggest improvements.
• Analyze production and machinery line.
• Ensure quality output of molded components.
• Develop and design engineered plastic parts, insert molded parts and assemblies.
• Interact with customers, suppliers, and internal resources.
• Establish the parameters for an optimal molding environment.
• Design necessary components.
• Ensure environment to make plastics is appropriate.
• Analyze quality control and correct flaws.
• Work with other team members and vendors.
• Review existing validation reports.
• Create new reports and verifications.
• Operator and maintained injection molding machines, ensuringsmooth production processes.
• Conducted real-time troubleshooting to identify and address machine issues promptly.
• Collaborated with the maintenance team to perform preventive maintenance activities.
• Executed mold changes and set up machines for different production runs.
• Monitored and maintained product quality through regular inspections.
• Worked with production schedules to meet daily and weekly production targets.
• Implemented safety protocols and ensured a safe working environment.
• Trained new operators on machine operations and safety procedures.
• Recorded and documented machine parameters and production data.
• Oversaw mold setup/mold changes and adjusted processes to
• ensure product quality.
• Material Processing (PC, HIPS, ABS, Nylon GF,PPTF.POM,PPCP,PP)
• Oversaw production on 16 injection molding machines,
• maintaining lean manufacturing principles..
• Operated and supervised MILACRON (EQ&M) Series, ANGEL,HAITIAN, TEDERIC, and TON (80 to 2800) injection molding machines.
• Conduct analysis and improvement activities for new mold trials, resulting in enhanced product quality.
• Monitored and improved Overall Equipment Effectiveness (OEE) on the shop floor, achieving productivity gains.

Recuriement:

Requirements and skills

• Bacheleor Degree in Plastic moulding Technology or Manufacturing Engineering
• Proven experience as production Engineering
• Deep knowledge of production management
• Understanding of quality standards and health & safety regulations
• Knowledge of performance evaluation and budgeting concepts
• Experience in reporting on key production metrics
• Proficient in MS Office and ERP software
• Outstanding communication ability
• Excellent organizational and leaderships skills
• Attention to detail
• Strong decision-making skills and a results-driven approach
• All Races Welcome
• Prefer to work in Night Shift also

Deskside/Desktop Support Engineer

We are looking for experienced junior and senior full-time deskside engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Background

Thales people architect solutions that are relied upon to deliver operational advantage at every decisive moment throughout the mission. Defence and armed forces customers rely on us to deliver the full range of defensive systems for land, sea, and air. From early warning, to threat neutralisation, our platforms cover all levels from very short-range systems, to extended protection across the entire battle-space including Airspace Mobility Solutions, Vehicles and Tactical Systems and Missile Defence, Optronics, and Radar.

Air Mobility Solutions provides leading edge airspace control and security solutions for the commercial and defence sectors.

Thales's advanced LORADS air traffic management system ensures the safety of operators and passengers at a time when soaring growth in air traffic poses a range of complex technical challenges.

Technologies supplied by the Air Mobility Solutions global centre of excellence, based in Singapore, are currently deployed in Singapore and across Asia and the Pacific region.

Thales Australia's air traffic control systems are in use in over 50 countries including Australia, Mexico, South Africa, China, Singapore and Thailand.

Purpose:

The Cyber Security Engineering position is within Airspace Mobility Solutions in Singapore to contribute, but not limited to the LORADS and Topsky-ATC HE projects managed and supported from Singapore.

The position includes the following main responsibilities:

• To undertake security engineering and architecture activities as per budget and aligned with contract and strategy set by the System Cyber Security Engineering Lead.
• To define security solution and associated estimates for specific work packages and bids activities, for example in relation to Contract Change Proposal and Engineering Change Requests/Proposals.
• To provide technical leadership on security solution for the LORADS System and the impact on suppliers’ sub-systems and security components (e.g. other business lines).
• To define security solutions cooperatively with supplier solution teams, engineers and the cyber security design authority.
• To develop security engineering artefacts such as the statement of applicability to the targeted version of the applicable security standards, and other applicable CDRLs as directed by the lead cyber security engineer.
• To lead the vulnerability management service activities to Asian customers.
• To lead security audit and cyber health check service activities to Asian customers.
• To interface with other business lines (e.g. CDS) for the delivery of other cyber security services to Asian customers.
• Contribute to the security risk management by identifying and characterising security risk to the customer context.
• To contribute to customer meetings in relation to the cyber security tasks that you are implementing.
• To contribute to other security tasks from the AMS Business Line like for instance incident response and crisis exercises.
• To support other project or service initiatives when required.

KEY ACTIVITIES AND RESPONSIBILITIES

As the Cyber Security Engineer, you are accountable for:

• Lead, tailor, and support the Security strategy as per Engineering Plans.
• Plan, execute and manage the delivery and the Customer approval of Security deliverables;
• Plan, execute and manage the delivery of the security component with appropriate artefacts.
• Manage the technical risks relevant to Security activities to contribute to program risk management.
• Lead Security Architecture Design as per project needs.
• Lead the vulnerability management service activities to Asian customers.
• Lead security audit and cyber health check service activities to Asian customers.
• Contribute to the response of cyber incident and crisis events.
• Select, specify, and deploy methodologies (including metrics), tools/platforms necessary for Security Engineering activities in line with company policies.
• Manage and prioritize defects correction and evolutions in accordance with the project sprint strategy.
• Support Bids and Engineering Change Proposal evaluation;
• Providing collaborative support to the other members of the Project team.
• Support and contribute to the definition of the Security solution and Policies for the Products (Topsky-HE, Topsky-One, LORADS ATC).

Interactions:

• Works closely with the head Cyber Engineering Manager and the Cyber System team in country and Australia, the cyber sub-system team and solution engineering teams from the various sub-systems, including the legacy LORADS ATC and the future Topsky-One.
• Works closely with Cyber Head of Discipline, Security Authority and Solution Architects.
• Works with Subcontractors and suppliers to ensure they are aligned with the Security Program and comply with the defined security baseline.
• To establish trusted relationship with the Customers and Subcontractors (including CDS).
• Strong internal and external stakeholder management skills.

Challenges:

• Complex stakeholder community with different requirements and cultural approaches to the Delivery Process.
• High level of Customer and Senior Thales Management scrutiny and audit.
• Re-establishing a robust and rigorous discipline of weekly/monthly reporting and tracking of Project issues (cost/risk/schedule etc).
• Working in a multicultural and multisite environment.
• This position requires the capacity to understand and handle resistance to change, to engage cross functional, diverse stakeholders.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

• Experience in the life cycle of software/system development including processes and responsibilities at each stage of the cycle.
• Delivery of engineering/management services to tight timelines.
• Understanding of Security System Engineering processes and FBL/ABL/PBL management
• Working with a multi-skilled team of engineers: 2+ years
• Knowledge of Security Standards (NIST, ISO27001, Singapore security standards)
• Understanding of System accreditation and impact on project streams (sub-systems).
• Proven problem identification and analysis skills and system requirements analysis skills.
• Selecting, specifying and deploying methodologies including metrics, tools/platforms (e.g. DOORS).
• Producing appropriate artefacts leading to Customer acceptance and final accreditation.
• Contributing to Cost Models.
• Contributor to Risks & Opportunity management.
• Contribution to the management of subcontractors.
• Providing coaching/mentoring of less experienced staff.
• Challenge status-quo by being creative and innovative.
• Capability to delegate and supervise work performance.
• Excellent written and oral communications skills.
• Ability to manage Work Packages.

(We manufacture of EG POLYTHENE PRODUCTS AND POLYPROPYLENE BAGS)

Production Engineer Responsibilities:

• Liaise with other managers to formulate objectives and understand requirements
• Estimate costs and prepare budgets
• Organize workflow to meet specifications and deadlines
• Monitor production to resolve issues
• Supervise and evaluate performance of production personnel (quality inspectors, workers etc.)
• Determine amount of necessary resources (workforce, raw materials etc.)
• Approve maintenance work, purchasing of equipment etc.
• Ensure output meets quality standards
• Enforce health and safety precautions
• Report to upper management
• Supervising the manufacturing processes, ensuring quality work is done in a safe, efficient manner.
• Liaising with other engineers to develop plans that improve production, costs, and labor required.
• Diagnosing problems in the production line and providing recommendations and training.
• Establishing safety procedures and protocols that take the workers' well-being into account, and that also minimize the carbon footprint.
• operate, calibrate, and know well maintain machinery, as well as inspect finished products to ensure quality work.
• Keeping abreast of advancements in engineering and production, and sharing knowledge with co-workers.
• Identifying, documenting, and reporting unsafe practices.
• Drawing up production schedules and budgets for projects.
• Scheduling meetings with relevant departments and stakeholders.
• Analyzing all facets of production and making recommendations for improvement.
• Obtaining any materials and equipment required.
• Oversaw mold setup/mold changes and adjusted processes to
• ensure product quality.
• Material Processing (PC, HIPS, ABS, Nylon GF,PPTF.POM,PPCP,PP)
• Oversaw production on 16 injection molding machines,
• maintaining lean manufacturing principles..
• Operated and supervised MILACRON (EQ&M) Series, ANGEL,
• HAITIAN, TEDERIC, and TON (80 to 2800) injection molding
• machines.
• Conducted analysis and improvement activities for new mold
• trials, resulting in enhanced product quality.
• Monitored and improved Overall Equipment Effectiveness (OEE)
• on the shop floor, achieving productivity gains.

Production Engineer Requirements:

• Degree in engineering (Plastic moulding Technology)
• Relevant license may be required.
• Experience with CAD software.
• Proficiency in MS Office.
• Proven experience in the engineering field.
• Superb analytical, problem-solving, and critical thinking skills.
• Strong leadership abilities.
• Superb written and verbal communication skills.
• Ability to make decisions under pressure.
• Great attention to detail and organizational skills.
• Strong decision-making skills and a results-driven approach
• All Races Welcome
• Prefer to work in Night Shift also

Responsibilities:

• Work with Systems Engineers and Test Manager to select the correct testing methods and ensure all requirements (hardware and software) are properly tested
• Assist in creation/update of test plans and verification test scenarios
• Assist in reviews, including but not limited to, Test Readiness Reviews, Technical Qualification Reviews, and Final Qualification Reviews.
• Ensure full traceability of deliverables and tests to project requirements, using appropriate requirements management tools (e.g. DOORS), and defining comprehensive scenarios for integration and test
• Set up and maintain environment (e.g. Operating Systems, network, virtual machines) for testing, including development/modification of automation scripts for setup, tests & updates.
• Install and configure required COTS (commercial off the shelves) systems for testing, including development/modification of automation scripts for setup, tests & updates, where feasible.
• Prepare the resources used for various test configurations, develop and implement verification procedures, compile results, manage test deviations and record all verification results.
• Analyze test/system/application logs and results, assist in troubleshooting and communication of variances/anomalies to relevant stakeholders
• Responsible for Factory Acceptance Test, Site Integration and Testing covering:Preparing of test cases
  Participate in the onsite activities including system installation, system configuration, pre-on-site test activities
  Participate and coordination of on-site test and commissioning activities with customer as witness
  Producing test report, raise Problem Report if required
  Responsible for Test report submission and getting acceptance from customer
  Coordination with external party for testing when required
  
• Ensure all Configuration (e.g. IP addresses, hardware serial numbers) and Change Management (CM) processes are properly followed.
• Prepare, setup, automate and conduct tests on system performance and stability, for both hardware and software
• Ensure that tasks are performed to the satisfaction of all external and internal customers

Requirements:

• Diploma in a relevant area of Engineering or related discipline
• Higher degree qualifications are desirable
• Strong passion in validation and testing
• Confident, outspoken and able to execute tasks with customers as witnesses
• Basic knowledge of running/modifying batch files/scripts
• Basic knowledge of operating system setup and configuration, such as Linux and Windows Server
• Basic knowledge on networking such as VLAN & routing configuration and basic network troubleshooting
• Strong oral and written communications skills, and ability to communicate with multiple overseas and local teams
• Able to work independently and under pressure

Desirable Experience:

• Experience dealing with IT hardware (server, network switches, storage, workstation)
• Experience with integration or testing of system, preferably till commissioning phase
• Familiarity with various system protocols, including but not limited to, TCP/IP, HTTPS, PLC integration and Modbus
• Passion for self-learning and implementing automation for tasks
• Knowledge of coding/scripting language for automation (e.g. Python, PowerShell)
• Good experience in test automation tools or implementing one from scratch (e.g. Jmeter, LoadRunner, Serial Port Tester)
• Experience in an Engineering role deploying/testing one or more large-scale solutions
• Experience in container-based technology such as Kubernetes, Docker, Containerd
• Knowledge on continuous integration/deployment (Ansible, Jenkins, Foreman)
• Knowledge on Cyber Security and know-how on hardening systems & infra
• Knowledge of Databases and their setup
• Strong experience with Linux, Windows, and virtualization (VMWare, Hyper-V)
• Strong experience in technical and engineering work on Security/Defence projects
• Membership of relevant professional organization, e.g. INCOSE, Institution of Engineers Singapore, etc.
• Cloud Technology, Virtualization or Network related certifications

• Position : Service & Project Engineer (Equipment) – No Experience Required!
• Location : Boon Lay
• Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM
• Salary (commensurate with experience): Up to $3500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided
• Duration : Permanent
• Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Client visits and also monitor installation progresses at job sites
• Supporting sales team in preparation of technical presentations
• Working with sales engineers to assess and determine equipment needs and system requirements
• Supporting colleagues and suppliers by providing sales support such as identifying problems for installed equipment

Requirements:

• Minimum Diploma in Engineering
• Be able to understand and learn the mechanical and engineering aspects of the systems
• Must posses Class 3 Driving License
• Minimum 1 year of experience or no experience is welcome too!
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Senior Consulting Manager (APAC)

Reg no.: R21101247 | EA No: 13C6684

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

· Recipe creation and optimisation for new R&D applications requirement.
- Preventive and corrective maintenance planning cum execution and vendor management.

· To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up

· Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).

· To set-up appropriate process and product control plan and out of control action plans (OCAP)

· Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

· Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering

· Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)

· Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)

· Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

We are looking for an experienced and motivated Data Engineer.

As a Data Engineer at Mighty Bear Games, you will play a crucial role in shaping our data analytics platform. Your expertise will drive the development, maintenance, and optimization of data pipelines, and you’ll work closely with cross-functional teams to transform data into actionable insights that propel our games to new heights.

We are an equal opportunity employer. We celebrate diversity and welcome applications from candidates from all walks of life and are committed to creating an inclusive environment for all Bears.

Your Responsibilities Will Include

• Design, construct, install, test, and maintain highly scalable data management systems.
• Ensure systems meet business requirements and industry practices.
• Build high-performance algorithms, prototypes, predictive models, and proof of concepts.
• Research opportunities for data acquisition and new uses for existing data.
• Develop data set processes for data modeling, mining, and production.
• Recommend ways to improve data reliability, efficiency, and quality.
• Collaborate with data architects, modelers, and IT team members on project goals.
• work closely with product owners and being able design architecture that will support analytics solutions for the long term

As a Successful Candidate, You Would Have

• Proven experience as a Data Engineer, Software Developer, or similar role.
• Expertise in data modeling, ETL development, and data warehousing.
• Experience with SQL and NoSQL databases, including Postgres and Cassandra.
• Proficiency in scripting languages such as Python or Ruby.
• Knowledge of big data tools like Bigquery, Looker, Hadoop, Spark, Kafka, etc.
• Strong analytical skills with the ability to collect, organize, analyze, and disseminate significant amounts of information with attention to detail and accuracy.
• Adept at queries, report writing, and presenting findings.
• Creative problem-solving skills and excellent communication.
• Passion for gaming and understanding of the gaming landscape.
• A genuine interest in games and/or web3 and experience working in relevant creative industries.

As a Bonus, You Would

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or a related field.

If you want to be part of a team committed to transparency and openness, then Bear Force One is the place for you!

We are always on the lookout for interesting people - even if your profile doesn’t meet the requirements fully, we'd love to hear from you!

Whether you’re new to the industry or have several years of experience, here are some pointers on things we look for at Bear Force One: http://bit.ly/MBG-HowToLandYourDreamGamesJob and when you’re ready, just click to apply!

Position : Sales & Project Engineer (Equipment) – Up to $4,000 Basic – Boon Lay - No Experience Required!

Location : Boon Lay

Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM

Salary (commensurate with experience): Up to $4,500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided

Duration : Permanent

Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Execute and follow through the sales plan set by the manager with the aim to expand the company’s customer base and ensure its strong presence in Singapore.
• Work as a team to gather information to submit tender.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Any other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Engineering
• Minimum 1 year of related experience or no experience is welcome too!
• Must posses Class 3 Driving License
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Senior Consulting Manager (APAC)

Reg no.: R21101247 | EA No: 13C6684

Responsibilities

• Understands the basic and essential specifications and requirements of the assigned project and Industry Standard, Classification Society and Regulatory requirements.
• Prepares the cable block diagram, interconnection diagram, loop diagram, I/O list and instrument index specific to the assigned project.
• Prepares engineering specifications (drawings, data sheets, etc) specific to the assigned project and validates them with the Senior/Lead Engineer or Project Manager before incorporating them in the RFQs.
• Evaluates with guidance from Senior/Lead Engineer, the basic items of all the bids received for I&C packages from various suppliers and performs a technical bid evaluation process against the project specifications.
• Prepares accurate documents and specifications timely to be provided to the successful vendors to enable the latter to execute their work and deliverables.
• Develops solutions to the less complex range of technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and proposing various options/measures using experience, precedents and professional references.
• Under supervision of senior/lead engineer evaluates the I&C requirement for mechanical packages in Marine & Topside, contributes to technical bid evaluation process, and ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications.
• Participates in Factory Acceptance test/Site Acceptance test to ensure that Instrument items function as per specifications. Where necessary, works with the suppliers/contractors concerned to rectify the issues & making sure that they comply with the specifications and are ready on time.
• Participates in meetings, reviews progress and helps address interface/implementation/execution issues, escalates where necessary to ensure that the project proceeds timely and smoothly. Follows up to implement continuous improvement or lesson learnt actions items.
• Provides technical/engineering support to Construction/Commissioning work at site, helps trouble shoot and follows up to rectify the gaps or problems. Where necessary, provides off-site support and advice.
• Guides junior Engineers.

Qualifications & Experience

• Bachelor in I&C Engineering
• 7 years of relevant working experience in I&C engineering in oil and gas sector.
• Comprehensive knowledge on functionality of FPSO

1. Candidate must be a Diplomo/Degree in Electrical (or)

2. Diplomo in Mechanical/Degree (or)

3. Dipolomo in Civil/ Degree (or)

4. Diplomo in Computer Application/Degree

5. He must have more then five years of working experience in their respective field.

6. He must have good interpersonal skills, Hard working and positive attitude

7. Attend to other ad hoc duties instructed by supervisor.

8. Perform daily routine work of company.

9. 6 days work week.

10. Must have class3/3c driving license

11. Must be able to handle the construction project Independently

Responsibilities

• Must know also well referred to as a machine Programming, Seeting, or tender, uses manufacturing equipment to shape metal or plastic components for products.
• operate, calibrate, and know basic maintain machinery, as well as inspect finished products to ensure quality work.
• Liaise with other managers to formulate objectives and understand requirements
• Estimate costs and prepare budgets
• Organize workflow to meet specifications and deadlines
• Monitor production to resolve issues
• Supervise and evaluate performance of production personnel (quality inspectors, workers etc.)
• Determine amount of necessary resources (workforce, raw materials etc.)
• Approve maintenance work, purchasing of equipment etc.
• Ensure output meets quality standards
• Enforce health and safety precautions
• Report to upper management
• Keeping abreast of advancements in engineering and production, and sharing knowledge with co-workers.
• Identifying, documenting, and reporting unsafe practices.
• Drawing up production schedules and budgets for projects.
• Scheduling meetings with relevant departments and stakeholders.
• Analyzing all facets of production and making recommendations for improvement.
• Obtaining any materials and equipment required.
• Oversaw mold setup/mold changes and adjusted processes to
• ensure product quality.
• Material Processing (PC, HIPS, ABS, Nylon GF,PPTF.POM,PPCP,PP)
• Oversaw production on 16 injection molding machines,
• maintaining lean manufacturing principles..
• Operated and supervised MILACRON (EQ&M) Series, ANGEL,
• HAITIAN, TEDERIC, and TON (80 to 2800) injection molding
• machines.
• Conducted analysis and improvement activities for new mold
• trials, resulting in enhanced product quality.
• Monitored and improved Overall Equipment Effectiveness (OEE)
• on the shop floor, achieving productivity gains.

Requirements and skills

• Bacheleor Degree in Plastic moulding Technology or Manufacturing Engineering
• Proven experience as production Engineering
• Deep knowledge of production management
• Understanding of quality standards and health & safety regulations
• Knowledge of performance evaluation and budgeting concepts
• Experience in reporting on key production metrics
• Proficient in MS Office and ERP software
• Outstanding communication ability
• Excellent organizational and leaderships skills
• Attention to detail
• Strong decision-making skills and a results-driven approach
• All Races Welcome
• Prefer to work in Night Shift also

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Primary Purpose:

Manage and supervise the daily activities of the team members in accordance to the production specifications and requirements. Ensure that the team meets standard in terms of operation efficiency, and service uptime. Develop the capability of team members.

Job Responsibilities:

• Supervise a group of cameraman and guide them in all video technical set up. Review and update SOPs.
• Conduct annual review and assessment of team members training needs.
• Guide crew in camera operation (i.e. general camera system set up, angles, distances, movement) and overall operations concerning video, audio and electrical for TV production.
• Perform duty as Technical Producer for major production whenever necessary. Ensure production meets broadcasting standard. Anticipate problem and provide solution on complex issues.
• Provide contingency planning and ensure deliverable of production setup are adhered.
• Keep abreast of broadcasting technology development and industry standards and workflows. Offers recommendations for upgrades and changes to ensure operations are kept relevant and competitive.

• Diploma in Film Production or Electronics/Electrical Engineering or Audio related field.
• At least 10 Years of Ligting experience is preferred.
• Possess in-depth working knowledge of overall unit operations concerning camera, video, audio, lighting and electrical for TV Broadcasting.
• Possesses knowledge of camera systems, lenses and camera support equipment will be added advantage.
• Familiar with international broadcast standard, preferably ITU (International Telecommunication Union) and EBU (European Broadcasting Union) broadcast standard.

Job Description:

Mechanical Design on optical modules and photonics system

Job Responsibilities:

· Responsible for mechanical design

· sourcing for mechanical / electronics elements;

· Supporting the team on project activities,

· Maintain engineering documentation etc.

· Responsible for equipment set up and maintenance etc.

· Providing technical support to sales

Job Requirements:

· Min. Degree in Engineering (Optical/Mechanical/Physics/any equivalent).

· Min. 3 years’ experience in mechanical design

· Good at design software: autocad, solidwork etc.

· Good team player

This position is responsible for delivering billable network services by delivering superior technical solutions to all target customers, particularly in Security and network (LAN) solutions.

Responsibilities:

Ensure best practice is leveraged in providing the solutions to target accounts

Provide support to customers, particularly in Security products such as Firewalls, IPS, IDS (e.g. Palo Alto, Checkpoint, McAfee, Bluecoat, F5) products, transferring customers’ requirements into a solution based on Fujitsu solutions and services. Owns technical design from concept to subsequent implementation; responsible for design, configuration, testing and commissioning of solutions

Manage first level escalation of any deployment issues and problems. Note and escalate service development required to meet customer needs

Identify and create business opportunities for Fujitsu target customers and prospects

Participate in the tendering process and development of proposals in line with customer needs, liaising and qualifying with other colleagues as necessary. Supports in the development of customer SLAs.

Present technical solutions and services to customers both formally and informally as required with minimum support.

Stay abreast of technical issues, options and advancements within the internetworking industry relevant to the Fujitsu services’ portfolio

Provide a consistently high quality (billable or non-billable) technical service to existing and new customers ensuring that customer satisfaction is maintained or improved

Job Requirements:

A relevant degree with at least 3-5 years of experience as technical sales support in network environment and relevant experience in project implementation

CCNP certified a must, CCIE will be an added advantage

Good knowledge in network systems, communications interfaces protocols and diagnostic tools

Good experience on deploying security solutions such as Cisco ASA, FTD, Palo Alto, Checkpoint, Juniper, McAfee IDS/IPS, F5 and Other network security systems

Good knowledge of products related to Routing, Switching and Firewall

Experience with VMWare NSX V or T is a plus.

(We manufacture of EG POLYTHENE AND POLYPROPYLENE BAGS)

Responsibilities

• Evaluate manufacturing processes based on quality criteria, such as efficiency and speed
• Study production and machine requirements
• Develop and test effective automated and manual systems
• Design and install equipment
• Organize and manage manufacturing workflows and resources
• Integrate disparate systems (e.g. equipment handling, transport)
• Optimize facility layouts, production lines, machine operations and network performance
• Resolve issues and delays in production
• Find ways to reduce costs and maximize quality
• Train staff in new and existing processes
• Collaborate with other engineers, contractors and suppliers
• Ensure that manufacturing procedures follow safety and environmental regulations
• Upgrade systems and processes with new technology
• Operate and maintained injection molding machines, ensuringsmooth production processes.
• Conducted real-time troubleshooting to identify and addressmachine issues promptly.
• Collaborated with the maintenance team to perform preventive maintenance activities.
• Executed mold changes and set up machines for different production runs.
• Monitored and maintained product quality through regular inspections.
• Worked with production schedules to meet daily and weekly production targets.
• Implemented safety protocols and ensured a safe working environment.
• Trained new operators on machine operations and safety procedures.
• Recorded and documented machine parameters and production data.
• UNITED PLASTIC PRIVITED LIMITED |2022-2024 present | Injection molding Technician
• Oversaw mold setup/mold changes and adjusted processes to
• ensure product quality.
• Material Processing (PC, HIPS, ABS, Nylon GF,PPTF.POM,PPCP,PP)
• Oversaw production on 16 injection molding machines,
• maintaining lean manufacturing principles..
• Operated and supervised MILACRON (EQ&M) Series, ANGEL,
• HAITIAN, TEDERIC, and TON (80 to 2800) injection molding
• machines.
• Conducted analysis and improvement activities for new mold
• trials, resulting in enhanced product quality.
• Monitored and improved Overall Equipment Effectiveness (OEE)
• on the shop floor, achieving productivity gains.

Requirements and skills

• Bacheleor Degree in Plastic moulding Technology or Manufacturing Engineering
• Proven experience as production Engineering
• Deep knowledge of production management
• Understanding of quality standards and health & safety regulations
• Knowledge of performance evaluation and budgeting concepts
• Experience in reporting on key production metrics
• Proficient in MS Office and ERP software
• Outstanding communication ability
• Excellent organizational and leaderships skills
• Attention to detail
• Strong decision-making skills and a results-driven approach
• All Races Welcome
• Prefer to work in Night Shift also

Primary Purpose:

Manage and supervise the daily activities of the team members in accordance to the production specifications and requirements. Ensure that the team meets standard in terms of operation efficiency, and service uptime. Develop the capability of team members.

Job Responsibilities:

• Supervise a group of cameraman and guide them in all video technical set up. Review and update SOPs.
• Conduct annual review and assessment of team members training needs.
• Guide crew in camera operation (i.e. general camera system set up, angles, distances, movement) and overall operations concerning video, audio and electrical for TV production.
• Perform duty as Technical Producer for major production whenever necessary.
• Ensure production meets broadcasting standard.
• Anticipate problem and provide solution on complex issues.
• Provide contingency planning and ensure deliverable of production setup are adhered.
• Keep abreast of broadcasting technology development and industry standards and workflows. Offers recommendations for upgrades and changes to ensure operations are kept relevant and competitive.

Qualifications

• Diploma in Film Production or Electronics/Electrical Engineering or Audio related field.
• At least 10 Years of Ligting experience is preferred.
• Possess in-depth working knowledge of overall unit operations concerning camera, video, audio, lighting and electrical for TV Broadcasting.
• Possesses knowledge of camera systems, lenses and camera support equipment will be added advantage.
• Familiar with international broadcast standard, preferably ITU (International Telecommunication Union) and EBU (European Broadcasting Union) broadcast standard.