Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Description and Qualifications for a Engineer in the Petrochemical Industry

A Engineer in the petrochemical industry at Jurong Island plays a crucial role in overseeing engineering activities at the site. Here is a job description and qualifications typically required for this role:

Job Description:

1. Technical Oversight: Provide technical expertise and support, resolve drawing discrepancies & technical difficulties with technical team and ensure preparation of detailed method statements and work instructions for scheduled job are done. Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

2. Project Management: Manage engineering projects, including planning, scheduling, and budgeting to ensure projects are completed on time and within budget.

3. Safety Compliance: Ensure strict adherence to safety regulations and protocols of the job site to maintain a safe working environment.

4. Quality Control: Oversee quality control procedures to maintain high standards of construction and operation.

5. Team Collaboration: Work closely with multidisciplinary teams, including chemical engineers, mechanical engineers, and technicians. Coordinates between sub-contractors/vendors/stakeholders and monitor site manpower / material / equipment demands to meet schedules. Liaise with the owners and consultants on the submission related to structural works, project, maintenance works, electrical works and Technical Department.

6. Problem Solving: Identify and troubleshoot engineering issues, offering effective solutions.

7. Documentation: Prepare technical reports, documentation, and progress reports.

8. Supervision: Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.

• Full time supervision at site
• Able to communicate and team work
• Other Ad-Hoc related duties assigned by the company

Qualifications:

1. Education: A Bachelor's Degree in Engineering or a related field is typically required

2. Experience: 10 years of experience as a Engineer or similar job role in the electrical Engineering industry or Mechanical cum steel structural work and maintenace works.

3. Technical Skills: Technical expertise and knowledge in mechanical cum steel structural works , electrical , maintenance works , M& E engineering. Proficient in Microsoft Project and Good knowledge on method statements, Autocads drawing –piping isometric and etc

4. Communication Skills: Effective communication and teamwork are crucial for collaborating with various teams and stakeholders.

5. Project Management: Project management skills are valuable for overseeing engineering projects effectively.

6. Safety Awareness: A strong commitment to safety and the ability to ensure compliance with safety standards is essential.

• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team / department.
• Ensuring that the site works are completed with high quality standards and adhering to safety requirements throughout the project or maintenance works.

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in CVD equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in CMP equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

• Electrical Supply (MNC company)
• Basic $3000 - $3500
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Working location: Tuas
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspect and test incoming and outgoing parts according to established procedures and maintain quality records.
• Report quality issues to the QA Manager and relevant department heads, ensuring non-conforming products are separated.
• Authorize the rejection of unsatisfactory parts and approve the release of conforming parts for delivery.
• Perform routine factory tests on switchboards and oversee testing and commissioning on-site or aboard vessels.
• Assist in achieving quality objectives, recommend solutions for issues, and verify their implementation.
• Ensure safety compliance, proper calibration of instruments, and maintain good housekeeping in the QA Department.

Requirements

• Min ITE/ Diploma in Electrical Engineering

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Chemical and Biomolecular Engineering, National University of Singapore, is inviting applications for 1 Research Engineer (RE) position under Associate Professor Sibudjing Kawi’s group. The candidate will work on Shell research project entitled “Integrated Catalytic Plasma and Membrane Design for Low-Temperature High-Value Olefins Production from Light Hydrocarbons”.

Qualifications

Master degree in chemistry/chemical engineering in the area of catalysts, inorganic membranes and inorganic membrane reactors for high temperature reactions.
• Proven experience (with good research track record in terms of publications and/or patents) in the field of inorganic hollow fiber membrane synthesis, catalyst synthesis/characterization/testing for hydrocarbon pyrolysis and catalytic membrane reactor design.
• Strong team player skills and the ability to work harmoniously with a diverse workforce.

Responsibilities:

• Plans for production which includes releasing of work orders and ensuring on-time delivery of shipments based on customer requirements
• Works closely with purchasing and warehouse/logistics groups to ensure on-time receipt, delivery of materials and finished goods shipments
• Monitors and co-ordinates on material shortages, expediting and ensuring material availability to support production plan
• Manages spares planning support and ensure timely delivery of spares to distribution centre
• Drives spares repair material planning and optimize the materials needed to support the spares replenishment program
• Drives and minimize excess and obsolescence inventory
• Assists in developing, maintaining and improving existing processes, procedures and key performance metrics

Requirements:

• Bachelor Degree / Diploma or equivalent in Technical Engineering / Business / Supply Chain
• Minimum 2 years of related industry experience in manufacturing and production planningKnowledge of work order management and understanding of Bill of Material
  Proficient in an ERP system, preferably SAP system (PP module) with good knowledge of supply chain, materials flow concepts and production planning reporting/metrics
  Experience in low volume high mix (preferably equipment manufacturing) and DFT/pull manufacturing environment is a plus
• Strong written and verbal communication skills
• Team player, self-driven and able to work under pressure with a sense of urgency
• Ability to adapt to a fast-paced work environment and to work with a variety of offshore locations

COMPANY

At Peptobiotics we have built a new biotechnology product to replace the billions of dollars of antibiotics currently used in agriculture - enabling a productive, sustainable food system free from disease, and helping prevent the superbug crisis. We use genetically modified microbes to produce novel antimicrobial peptides. Our strain and bioprocess teams work together designing our product around straightforward scale-up and profitable unit economics.

OBJECTIVES

• Operation of bioreactor systems for submerged fermentation, downstream processing and sample analysis.
• Liaise with Chinese contract manufacturers for production at ~80kL scale and assist them in troubleshooting when required.
• Drive process optimisation by overseeing rigorous data collection, recording, and analysis. Use effect size analysis, DoE, etc to accelerate yield improvements and scale up.
• Preparation of SOPs for fermentation and downstream processing.
• Work with other team members to align molecular, bioproduction and veterinary research.
• Training and mentorship of junior team members.

REQUIREMENTS

ATTRIBUTES

• Experience with benchtop microbial bioreactor systems.
• Experience with yeast secreted protein production fermentation optimization preferred.
• PhD or Masters with work experience.
• Ideally has some experience or familiarity with downstream processing and analytical methods.
• Ideally has some experience or familiarity with industrial-scale fermentation.
• English and Chinese language working fluency are both required.
• Good communicator that enjoys working with and supporting others.
• Driven and takes initiative.
• Interested in entrepreneurship, biomanufacturing, synthetic biology, sustainability/agriculture,aquaculture, technology commercialisation and science with real world impact.

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.

Key Performance Indicators

Wholesales

• Achieve the Sales Objective for the Wholesales Team
• Increase in sales revenue and profit margin
• Increase in customer base SG
• Meeting the sales target set
• Maintaining and improving relationship with the customers
• Work with Sales Manager in managing Key Accounts

Operations

• Manage Production, QA/QC & Wellaway team

Job Responsibilities and Duties

Wholesales

• Develop strategies and techniques to achieve sales targets and guide team members on future actions.
• Identify potential customers and generate leads for the organization, aiming to create new opportunities.
• Foster teamwork to ensure the team works cohesively towards a common goal.
• Ensure the team meets desired results.
• Determines annual SG Sales and gross-profit plans (profits).
• Implements SG sales programs by developing field sales action plans.
• Address customer complaints by investigating issues, developing solutions, preparing reports and making recommendations to management
• Maintain necessary data and records for future reference.

Leadership

• Oversee the operations of Production, QA/QC, Wellaway and Wholesales team.
• Monitor and ensure overall team productivity and performance.
• Provides leadership, support and guidance to respective departments.
• Ensures strong communication between team leads by conducting communication sessions and ensuring proper dissemination of information to employees.

Job Requirements

Education and Experience

• Degree in business, marketing or any discipline.
• 10 years and above relevant experience within the sales and marketing.
• Exposure in pharmaceutical sales is essential.
• Good organization and planning skills.
• Good leadership and coaching skills.
• Good teamwork spirit.
• Excellent interpersonal skills.

Personal Competencies

• Think creatively and make decision.
• Possess good communication skills (internal and external).
• Persuasive aptitude.
• Attentive to details.
• Adaptable to changes.
• Good understanding of market trends.
• Patient, determined and perseverance.

Special Requirements

• Good knowledge and understanding of the market situation and changes.
• Sound understanding and knowledge of pharmaceutical and medical industry.

Responsibilities

Operational support and efficiency

• Perform scheduled preventive maintenance (PM) and troubleshoot equipment-related problems to minimize equipment downtime
• Resolve equipment issues and implement corrective and preventive actions
• Always aim to maximize uptime of equipment to sustain equipment performance
• Prepare and execute new equipment start-up by working with cross functional team
• Coordinate with process, integration and manufacturing engineers to ensure work is carried out efficiently to meet module objectives.
• Provide leadership in giving direction and systematic guidance to Equipment Engineer / Technologists/Technicians.

Record and reports

• Review, validate and analyze given reports
• Ensure staff's on-time submission and accuracy on the tool checklist or report

Documentation & Standard Operating Procedures

• Establish and implement all equipment specification, troubleshooting procedures, maintenance procedures, safety related documents and ensure compliance with corporate requirements and procedures
• Documentation of Corrective Action and Best-Known Methods for equipment to allow more efficient troubleshooting
• Lead and work with the supplier and cross function groups on new tool start up with necessary documentation, gantt chart, site preparation, facilities preparation, acceptance preparation, automation preparation and production readiness .

Cost efficiency

• Work with equipment vendors and spare parts suppliers to improve and develop new methods to achieve improvement in maintaining the tools
• Expected to involve actively in yield improvement, cost reduction, 2nd source suppliers and parts sourcing/testing, optimisation of new machine qualification release plan and cycle time reduction projects

Equipment improvement

• Participate in global key equipment exchange to improve and align strategy and plans
• UPkeep, monitor and control equipment performance indices (MTBF, MTTR, UPtime% , Errors Pareto list, WSPC and etc)
• Maintain optimum utilization of equipment and resources and constantly review methods of OEE management to reduce tool downtime and increase equipment throughput
• Develop and implement improvement/safety program of preventive maintenance task of machines
• Lead Technicians to participate in continuous improvement projects

Training and development

• Train/mentor Technicians and Engineers through OJT and continually upgrade their technical skills to cope with technological changes

Quality

• Participate in QIT programs to optimize equipment utilization and cost of maintenance
• Analyze trend, propose areas of quality improvement; Coordinate evaluation and implementation with relevant parties
• Lead or participate in quality related exchange to enhance improvement and preventions

Safety

• Ensure good housekeeping and safety practices in the Fab
• Work with HSE team to establish ,maintain tool and chemical safety related documents

Requirements

• Possess at least a Bachelor’s degree in engineering (Material Science, Chemical Engineering, Electronic/Electrical Engineering, Physis) with min 3 years experience as tool owner
• Preferable hands on experiences with knowledge on

1. Vapor phase decomposition- inductively coupled plasma-mass spectrometry(VPD -ICPMS)
2. Film measurement system
3. Visual and Sorter systems
4. Sem Vision
5. Bagging tool and Box cleaner tools
6. Automation material systems

• Skilled in JMP, Python and driven on root cause analysis techniques to aid on troubleshoot complex problems and provide root-cause fixes to recover/improve the tool and/or process
• A critical thinker team player who loves challenges, thrive on complex issues, multitasker and possess passion for learning
• Have good communication skills and time management discipline.

We're seeking a skilled Engineer, Quality Assurance to join our team in Singapore. Reporting to the Engineering Manager, you'll play a critical role in ensuring the quality assurance aspects of our technical areas.

Key Responsibilities

• Participate in our shift-left testing process and entire Software Testing Life Cycle (STLC) to ensure high-quality products.
• Collaborate with Product Managers to define, test, and validate product requirements.
• Design, execute, and automate tests for web applications and backend APIs, ensuring comprehensive coverage.
• Produce detailed test reports and serve as the sign-off authority for feature releases.
• Work closely with Development teams to identify and resolve issues, ensuring seamless collaboration.
• Contribute to the evaluation and adoption of testing automation frameworks.
• Mentor junior QA engineers, sharing expertise and promoting growth.

Essential Qualifications

• Bachelor's or Master's degree in Computer Science or a related field.
• Excellent communication skills, with the ability to explain technical concepts to diverse audiences.
• 2-5 years of experience in web application testing and automation.
• Strong foundation in Software Engineering concepts and STLC life cycle.
• Ability to write test plans and test strategy documents.
• Good knowledge of API and Web testing, Networking, and Operating System concepts.
• Strong troubleshooting, debugging, and analytical skills.

Preferred Qualifications

• Experience with testing automation tools.
• Background working in product companies.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

SALARY:

Junior - ($4,200-$5,000)

Senior - ($5,000-$6,000)

LOCATION:

Ang Mo Kio / Yio Chu Kang / Central

Job Description

•Manage & Lead the electrical team.

•Perform engineering duties such as design, engineering calculations, planning, tender.

Preparation/evaluations as part of the engineering project team

•Team development

•QA/QC documentation review of engineering deliverables

•Liaison with clients, project managers, architects, contractors

•Resolve any technical problems faced during project design and/or construction stages

•Suggests ways to increase revenues and efficiency.

•Testing & Commissioning of the ACMV Electrical Systems.

•Ensure the team follows all electrical codes and standards.

Job Requirements

•Any qualification in a relevant engineering field with minimum 5 years of related working experience

in the Construction Electrical Field associated with ACMV / Electrical.

•Engineering design of commercial buildings, major infrastructure transportation projects and

mixed-use developments

•Possess design experience and good understanding of ACMV / Electrical technical systems and

procedures:

•Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as

cable, generators, panels, etc.

•Develop, design through establishing, design briefs, design reports, calculations, schematics,

schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

•Productions of drawings and developing models

•Site Experience, Testing & Commissioning Experience

•Having experience working with Infrastructure Projects would be an added advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

Product area

In gTech Users and Products (gUP), our mission is to advocate for Google’s users by creating helpful and trusted experiences across the product ecosystem. We achieve this by meeting partners and consumers where they are with support and help, representing their needs with our product partners and proposing fixes and features that elevate their engagement with Google's diverse product ecosystem. Additionally we provide a range of product services that ensure our products are optimized for every user, no matter where they are in the world (e.g., localization, digitization, partner integration and more).

Job description

gTech’s Professional Services team takes a creative, collaborative, and customer-centric approach to provide foundational services and forward-looking business solutions to top advertiser and publisher customers. Through technical implementation, optimization, and key solutions, gTech Professional Services helps customers attain their business goals while building long-term capabilities.

Additional job description

In this role, you will be responsible for the technical relationship of our Distribution partners. You will collaborate with teams in Engineering, Business, and Product Management to use technologies for our internal or external clients/partners. From concept design and testing to data analysis and support, you will own the technical execution and work with business operations to distribute products such as Chrome, Lens, Android apps, and more. You will balance business and partner needs with technical constraints, develop innovative, solutions, and serve as a partner and consultant. You will also build tools and automate processes, oversee the technical execution and business operations of our products, as well as develop product strategy and prioritize projects and resources.

Qualifications

Job responsibilities

• Work with our Product, Engineering, and Partnership teams. Develop solutions, provide consulting services to our partners, build relationships, and know the partner's needs.
• Help partners in their day-to-day challenges by being the subject matter expert, delivering solutions, and troubleshooting their technical issues.
• Propose, design, create, and present proof-of-concept prototypes and demos to a variety of audiences, from engineers to marketing professionals.
• Perform implementation reviews. Advocate for new product features, and provide partner feedback to internal cross-functional teams including Product Management and Engineering.
• Deliver business intelligence. Use internal and external data sources to provide data insights to support decision making.

Minimum qualifications

• Bachelor’s degree in Engineering, Computer Science, a related field, or equivalent practical experience.
• 3 years of experience working with client-side web technologies (e.g., HTML, CSS, JavaScript, or HTTP).
• 3 years of experience coding with one or more programming languages (e.g., Java, C/C++, Python).
• Experience in technical troubleshooting, and managing internal/external partners or customers.

Preferred qualifications

• Master’s degree in Engineering, Computer Science, Business, or a related field.
• 5 years of experience in business intelligence, data analytics, or statistics.
• 5 years of experience working with systems (e.g. Linux, Unix).
• Excellent project management skills and attention to detail.
• Excellent problem-solving and troubleshooting skills.
• Ability to present to the technical level audience.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Responsibilities:

- Design and implement integration solutions for various physical security systems, including access control, video surveillance, intrusion detection, video analytics and alarm systems

- Ability to understand and address customer requirements and translate them into technical solutions

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Collaborate with cross-functional teams to gather requirements and define project scope

- Conduct site surveys and assessments to determine integration needs and best practices

- Conduct POC, demo, testing and setup of security system and video analytics

- Manage and execute projects with strong project management skills

- Develop documentation, including system specifications, integration plans, and user manuals

- Stay updated on industry trends, technologies, and best practices related to physical security

Requirements:

- Bachelor’s degree in Computer Science, Engineering, or a related subject

- Programming skills in Python, C++ and/or Javascript

- Fullstack experience is strongly preferred

- Strong understanding of networking, database management, and software integration

- Familiarity with industry standards and protocols (e.g., ONVIF, BACnet, etc.)

Nice to have:

- Professional experience working with VMS systems and integrating 3rd party solutions

- B2B (Business-to-Business) experience in physical security

- Technical security system certifications (I.e., Gallagher, Genetec, BICSI, Milestone) and/or related IT (i.e., CCNA) certifications preferred

- Possess market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, or PhD with Min. 5 years’ experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Summary:

• Construction industry
• Junior role up to $3800
• Senior role up to $5000
• Performance bonus on a yearly basis
• Location: AMK / YCK / Central
• 5 days work week
• Experienced in ACMV & LTA / SMRT

Key Responsibilities:

• Perform engineering design, calculations, planning, and tender preparation / evaluations
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaise with clients, project managers, architects, contractors about the projects
• Assist in resolving any technical problems faced during project design and / or construction stages
• Any other required duties as required by the Project Team

Key Requirements:

• At least 3 years experience in relevant field
• Must have ACMV, LTA / SMRT experience

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Title: Project Engineer (ID5034)
Location: Ubi
Working Hours: Mon to Fri 8.30am – 6pm
Salary: $3000 to $4000


Job Description:

The role and responsibilities include, but are not limited to,
• To manage projects, monitor progress and ensure smooth completion.
• To coordinate the works of a multi-disciplinary workforce including consultants, external subcontractors and etc.
• To handle project risk management and issues escalation.
• To ensure safe work procedures and environmental control measures are implemented at work site.
• To provide project status update to management accurately and in a timely manner.
• To attend to maintenance issues during DLP.
• To assists in products specification and datasheet.
• Any other ad hoc duties assigned by Manager.



Requirement:

• Min Diploma holder in Electrical / Electronic / Mechanical Engineering
• At least 3 years’ experience as Project Engineer
• Motivated to work in challenging, fast paced and result-driven environment
• Good communication and interpersonal skills
• Knowledge of lighting an advantage
• Knowledge of software an advantage, eg. Autocad, Photoshop, Dialux

Job Title: Site Engineer (ID8372)
Location: Woodlands, Singapore
Working Hour：Mon-Fri, 8:30am to 5:30pm
Salary: $2800 - $4000

Job Description:
-To resolve all technical and non-technical issues during the project lifecycle.
-To ensure the tracking and monitoring of items per contractual requirement.
-Responsible for submission and monitoring of technical drawings, method statements and proposals.
-To ensure construction meeting client & regulatory requirements.
-To carry out short-term planning to meet site progress.
-To co-ordinate, program and monitor site work, materials, plant & equipment.
-Carry out project objectives to align with company goals.
-Minimize material wastage on-site and maximize machinery/equipment usage.
-To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
-Follow approved construction method that is cost effective, productive & without compromising on Quality.
-Achieve targeted progress of works to ensure the intended cash flow.

Requirement:
-Experience in leading a team or subcontractors would be advantageous.
Strong communication skills.
-Highly committed and motivated individual.
-Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
-Fresh graduates are also welcome to apply.

Key Responsibilities:

• Work along with the development teams to onboard the Project onto AWS Platform
• Guiding the continuous integration, continuous deployment, continuous testing & continuous monitoring
• Work closely with the development team and operation team to ensure project delivery and maintain compliance standards.
• Set up, deploy, and maintain scalable, high-availability systems.
• Perform and automate provisioning and security hardening of systems.
• Set up and maintain CI/CD, automated testing, development, and delivery environments.
• Writing scripts/programs for service monitoring and health checks of systems
• Day-to-day monitoring, backup, deployment, and maintenance of systems

Requirements:

• Bachelor's or Master’s Degree in information engineering, information management or computer science
• Minimum 5 years in the software development industry or server infrastructure setup
• At least 3-years’ experience working closely with infrastructure, Experience in Linux, Windows
• Network troubleshooting is a plus.
• Good hands-on experience in using AWS Cloud
• Experience with IAC / config management tools (Terraform, Ansible, Puppet etc.)
• Good understanding of hardware infrastructure systems (network switches, firewalls, router etc.) and Linux operating system
• Good understanding of DevOps Principles and practices
• Experience with cloud orchestration, configuration management and auto-scaling techniques
• Experience on building and developing CI/CD pipeline and workflow.
• Cloud & DevOps Certifications e.g., AWS Solution Architect, DevOps is a plus.