a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

The key duties and responsibilities of the role include (but are not limited to):

• Reporting to the RF Manager
• To support radio network planning & optimization projects and ensure project milestone are met on time.
• Familiar and experience with mobile network rollout tasks.
• Perform site selection, site survey, antenna tuning & verification and acceptance testing.
• Perform post processing and analysis of drive test and walk test logfiles.
• Perform RF optimization for 4G/5G sites and performance monitoring.
• Capable to solve RF related problems, troubleshoot and identify root cause for performance issues (weak coverage, capacity congestion, pilot pollution, interference, overshooting and etc).
• Be responsible on good network performance for customer.
• As technical point of contact with project stakeholders, vendors and customer.
• Attend internal and external meetings with various levels i.e project managers, RF managers, vendors, contractors etc.

The candidate should possess the below qualities to fulfil the needs of the role:

• Tertiary education qualification majoring in Telecommunications, Electronics or related area
• Minimum 3 years of RF planning & optimization experience in LTE mobile network deployment.
• Excellent in the fundamentals of radio access technologies and antenna systems.
• Experience in multi-vendor wireless equipment operation and network optimization.
• Strong skill set in various RF planning and testing tools such as Atoll, Nemo Handy, Nemo Analyze, Google Earth, MapInfo Professional etc.
• Literate in computer application skills with Microsoft Excel, Power Point, Outlook etc.
• Dedicated team player with good communication and interpersonal skills.
• Able to work well with cross cultural teams.

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals.

Key Accountabilities:

The incumbent shall be responsible in assisting the site in program deliverance and alignment with both local and international codes, recognized industry standards and company requirements from project conception to realization. This translates in executing the site strategic roadmap to ensure site compliance and the right- to-operate with the various operating permitting licenses with all municipal, provincial, or local regulatory requirements, as well all Company HSES Standards (through the design and implementation of site wide programs).

Specific programs to be implemented will developing Risk Assessment, Job Hazard Analysis, Pre-Start Safety Review, Chemical Safety and Storage, Construction Safety Programs, any other programs assigned by the team lead but not limited to:

• Working closely with the Team Lead and operational leads in developing Risk Assessment programs and working closely with the relevant stakeholders in identifying the foreseeable hazards.
• Helping to conduct awareness training for Risk Assessment.
• Developing risk assessment template accordance to Company Standard and populate the observations and finding and converting into actionable items.
• Help to track all HAZOPs action items and maintain an updated checklist against the Risk Assessment, and PSSR walkdown.
• Carry out construction walkdown daily including night visits, populate all observations and follow-up with closure of the observations.
• Working and assisting HSE Engineers in identifying and evaluating environmental protection needs for existing and new processes, for assessing the magnitude of risks of non-compliance or environmental harm, including participating in mechanical integrity and reliability engineering evaluations of environmental protection equipment/systems (e.g., wastewater treatment).
• Support Company standards and programs to ensure site follows both local regulatory guidelines and Corporate HSES management system.
• Develop standardized procedures and practices to minimize compliance risks.
• Working closely with the HSE Engineer, relevant stakeholders and identifying the impact and aspect of the site environmental programs and working closely with stakeholders to implement ISO 50001 Energy Management System.
• Implement, enforce, and take ownership on Health, Safety and Environmental (HSE) requirements and initiatives within his/her areas of responsibilities.
• Constantly sharing on best practices and lessons learnt, share learning experiences to ensure continuous HSE culture improvement on-site.
• Ensure all affiliates are competent and provided with the necessary tools and equipment to work safely and without health risks.
• Carry out any other duties as assigned by the Head of HSES.

Education and Experience:

• BEng/BS Degree in Engineering, Science, Chemistry, Safety or technical equivalent.
• 8 to 10 years of safety and environmental sustainability experience in manufacturing environment. Preference will be given to candidates who understand cGMP/GDP requirements.
• Incumbent must have a good understanding of all local environmental regulations.
• Language skills/English is a must.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Job Scope :

- Leads in design, development and implementation of automotive electrical activities (according to the achievement plans) using approved engineering processes outlined by the company Product and Process Development procedure to meet customers’ requirements

- Lead in design, development and verification of new products to meet product and process development requirements

- Leads in evaluation and selection of new components / parts

- Leads in development and propagation of new technologies and processes

- Train and guides others on electrical design competency and act as technical resource to them

- Coordinate electrical activities to meet project requirements

- Provide technical support to manufacturing during pilot runs / tests production start- up period and existing products

- Meet departmental Cost and Quality objectives

Requirements:

- Degree in Electrical / Electronic or equivalent.

- 3 – 5 years’ of relevant experience

- Experience in Power Electronic / Automotive Industry

- Experience in complex systems with mechatronics, electrical machines, power electronics, and software

Interested candidates, please submit your detailed resume with photo to : [email protected]

Our client, an international company with presence in the USA, Europe and Singapore is seeking a Technical Sales Engineer specializing in water solutions.

Job Discription

• Foster and cultivate relationships with both prospective and existing clients within the water treatment sector.
• Offer technical guidance and assistance to clients regarding diverse water treatment systems.
• Deliver presentations to clients and internal stakeholders on water treatment systems and solutions.
• Formulate and present comprehensive proposals, quotes, and contracts to clients, incorporating detailed technical specifications and drawings.

Requirement

• Bachelor’s degree in engineering or related technical field (e.g., chemical, environmental, mechanical).
• 3+ years of technical sales experience in water treatment.
• Strong knowledge of: Various water treatment systems & applications and Latest industry regulations.
• Experience in designing water treatment systems such as CAD for technical drawings, system sizing and P&IDs.
• Excellent communication, both technical and non-technical.

We regreat to inform only shortlisted candidates will be contacted.

About Us

AsiaNext is a trusted digital exchange for institutional investors in Asia and globally. It will offer integrated listing, trading, and post-trade services for digital assets, including digital payment tokens. This joint venture between SBI Digital Asset Holdings Co., Ltd. (SBI DAH) and SIX Digital Exchange (SDX) will provide an institutional-grade platform to enable the tokenization and trading of existing securities and non-bankable assets.

AsiaNext will support the growing institutional demand for trading of public and private digital assets. It will leverage the extensive networks of SBI DAH in Asia and SDX in Switzerland and Europe, as well as their joint expertise in fulfilling institutional investors’ needs. Both SBI DAH and SDX have demonstrated leadership in digital asset markets globally through multiple investments, issuances and initiatives in this space.

Why Join Us?

With SIX Group AG and SBI Digital Asset Holdings Co., Ltd. as shareholders, AsiaNext has significant financial backing supporting its mission of building the world’s first institutional-grade digital exchange for institutional investors, and fostering trust through rigorous security and compliance to regulations. The team comprises members with traditional finance, digital finance and technology background spanning decades at UBS, JPMorgan, SIX, Thomson Reuters, MAS, SGX, DBS, Citi, Credit Suisse, Barclays, securities tokens and crypto exchanges, and many others.

If you are looking to develop your career in a professional and well-run environment, yet which moves and grows rapidly, join our diverse and talented team to build the digital exchange of choice for institutional investors.

About This Role:-

This a technical individual contributor role and you will be part of a dynamic team in the Technology Department. As a senior IT security engineer, you should have the relevant skills and experience in handling the offensive, defensive, and operational aspects of security. In the course of work, you will also gain deeper exposure to the world of digital assets, Web 3.0, blockchain technologies, smart contracts and exchange trading systems.

Responsibilities

• Design, lead and manage vendors in the implementation of IT security architecture, platforms, and solutions
• Coordinate and implement security solution delivery which may include access control solutions, blockchain and wallet security, virtual private network (VPN), identity and access management platforms, data protection technologies, anti-malware, vulnerability management, security monitoring and compliance tools
• Conduct regular security analysis such as penetration test and platform vulnerability scanning to prevent cyber attacks
• Oversee day-to-day IT security operations, including monitoring security systems, analyzing logs, and responding to security incidents in a timely manner
• Proven experience in IT security engineering specifically on application infrastructure defence-in-depth strategies
• Perform security review of the whole IT Security environment including servers and networks to ensure compliance with MAS Technology Risk Management (TRM) guidelines.
• Provide support, guidance and ideas to various company technology initiatives
• Support efforts in ensuring IT security policies, standards and procedures maintain relevant to regulatory/audit requirements and best practices
• Develop/implement automated systems to help spot known crypto security exposures.
• Stay current on the latest cyber threats and vulnerabilities to ensure the cyber security architecture and defences are up to date.

Qualifications And Experience

• Bachelor’s degree in Computer Science, Information Systems, Engineering or related disciplines
• Minimum 5 years of relevant experience in IT Security and/or IT Networking
• Relevant industry certification in security (e.g. CISSP, CISA, CISM, CEH etc.)
• Good knowledge of the regulatory standards in data protection and security of information systems
• Good working knowledge of AWS cloud security and DevSecOps would be an advantage
• Good working knowledge of blockchain and/or digital assets is preferred
• Strong communication / inter-personal skills, with a high level of integrity and trust.
• Ability to multi-task in a fast-paced environment

Employment Benefits

• Competitive staff benefits - 21 days annual leave, life insurance, and medical insurance (includes dependents)
• Variable bonus and long-term incentive program

How to Apply

If you are ready to take up a new challenge in a dynamic and fast-growing platform, please send your resume to [email protected], stating your name and title of the position applied for in the subject line.

Only shortlisted candidates will be contacted for further discussion. All personal data collected will be kept strictly confidential for recruitment purpose only.

AsiaNext is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, colour, sex, gender identity or expression, sexual orientation, age, non-disqualifying physical or mental disability, national origin, or any other basis covered by appropriate law.

Disclaimer

Asia Digital Exchange Pte Ltd (“AsiaNext”) would like to inform you that all our job vacancies are published on our official company website and LinkedIn page. AsiaNext uses only the following reputable third-party job sites – MyCareersFuture, LinkedIn, Jobstreet and Indeed. We advise prospective candidates to exercise caution and not apply for or share personal information for any job posting with any unauthorised sources.

Engineer (Private Residential Condominium Projects)

Job Description & Requirements

• Preparing and manage overall master schedule integrating work breakdown structure
• Preparing schedule bar chart plan considering all in puts (manpower, equipment and materials) availability, production and construction sequences
• Developing and update resources (manpower, equipment's and materials) availability, production and construction sequences
• Inspect and monitor daily the work happening on site
• Participate all meeting (ie. Schedule review meeting, progress meeting, coordination meeting, constructability review meeting and so on)
• Record / Document weekly progress meeting held with the client, consultants and sub-contractors
• Liaising with managers and engineers to discuss the progress of the project and address any issues that arise
• Developing contract and construction programmes and construction project plans

Requirements:

• Degree in Civil Engineering and/or relevant field
• Minimum 3 years’ of local experience in private residential and condominium projects
• Well-versed in sequence of works and authority requirement
• Proficient in planning works and material schedules
• Familiar with Ms Project is preferred

· Drive the Technical and Maintenance support to the operating units in terms of marine systems such as mooring system, loading and unloading facilities including hoses, cargo tanks etc.

· Ensure the units are maintained with respect to Class / Statutory and other regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore units in terms of mooring system, loading and offloading equipments including hoses, Cargo tank inspections and other marine / deck related issues

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Review and provide the engineering solutions for Management of Change Request from units as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis.

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide In-house Training for the Offshore Team as and when required

· Carry out competency evaluation for onboard Marine Superintendents as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating Facilities

· Liaise with HSEQ for any HSEQ related issues and ISM/ISPS related matters

· Provide support for fee agreement with Class Societies

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

Summary

The sales executive is responsible to generate and increase sales revenues as well as expand client base by seeking and following on leads, first point of technical contact by providing technical assistance and advice to clients, establish and maintain customer relations.

Primary Responsibilities

• Establish new customer market and sell the company’s range of products and services.
• Expand sales to existing client and provide excellent before and after sales services.
• Form good network/contacts with client and industry associations to be constantly connected to various events for networking opportunities.
• Provide customers with proposals which meets their needs.
• Follow up with client enquiries, and contracts.
• Other duties assigned by the management from time to time.

Knowledge and Skill Requirements

• Minimum diploma/degree in mechanical engineering / related discipline or extensive experience in the specialty lubricants industry.
• Independent, discipline, self-motivated and service oriented.
• Strong problem solving and ability to provide solutions skills.
• Strong interpersonal and communications skills
• Valid Class 3 license

• Exposure to Various Security Tools and Technology
• Career Progression Opportunities

About Our Client

Our client is a leading IT firm looking to hire DevSecOps Engineers to join their team. This is in line with their strategic business expansion plans.

Job Description

As a DevSecOps Engineer, your responsibilities include:

• Conducting secure design review, secure code review, and threat modeling
• Collaborating closely with multiple teams to proactively identify essential security practices for the business
• Offering technical expertise in addressing both existing and emerging information security risks
• Developing and deploying security tools and scanners, encompassing SAST and DAST

The Successful Applicant

As a successful candidate, you will have the following:

• Bachelor's Degree in Computer Science or a relevant field
• At least 3 years of experience in Application Security or DevSecOps
• Excellent knowledge with CI/CD and virtualization tools
• Requires CAT 1 clearance

What's on Offer

• Exciting Cyber Projects

· Responsible for all Electrical/Instruments/Electronic related matters

· Interpretation of all electrical & instrumentation drawings and coordinate with outsources on panel building, wiring, control sequence and PLC programming etc.

· Generate and prepare electrical wiring diagrams and installation of all electrical wiring works and control panel

· Building of system control panels, distribution/junction boxes

· Servicing, Testing and commissioning of all systems both in-house and on site (local and overseas)

· Setting and calibration of all instruments

· Trouble shooting of all electrical related problems

· Coordinate with production team on electrical installation for built systems

· Coordination with Customer on job related matters

· Provide support to Mechanical Engineer and procurement on technical aspects

· Liaise with suppliers (electrical items)

· Assist in Mechanical services

· Other Ad-hoc Duties when assigned

· Graduate with Electrical Engineering from ITE or Polytechnic

· At least 2 years of related experience

· Knowledge of Control Panel is an advantage

· At times require to attend site job at customer premises

· Transport provided in Boon Lay

· Willing to travel when assigned

· Please include your current and expected salary in your resume

• Guide new product and manufacturing transfer activities, overseeing the setup of a medical device service & repair facility.
• Execute new production/service/project initiatives and oversee budget and timeline management.
• Coordinate with customer on all aspects of new product development and service & repair activities.

Requirements:

• Degree in Engineering or equivalent.
• At least 2 years of NPI & Project Management experience in Medical Device Manufacturing environment.
• Proficient in Process Failure Mode Effects Analysis (PFMEA) and experienced in process validation.
• Well-versed in the requirements of a medical device service & repair center and its operating process.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Project Engineer

• Working Hours: Monday-Friday 9am-6pm
• Location: Kaki Bukit
• Salary: $3800-$5000 + VB

Requirements:

• Electrical Engineering with at least 2 years working experiences
• Experience in Marine industry preferred and familiar with Marine navigation system, PAGA, Weather Monitoring system, etc

Job Scope:

• Supervise and co-ordinate/scheduling work projects to fulfil customers’ orders timely, including hands-on component integration, testing & trouble shooting of our electrical products, .
• Support Sales proposals/quotations to customers; support project bidding, etc, including preparation of AUTOCAD technical drawing, datasheets.
• Source & Purchase supplies
• Site services (such as on board docked vessels) whenever required.
• Willing to travel overseas if required.

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Description

As a Software Engineer, you will lead the development lifecycle of our software applications, ensuring innovation, quality, and scalability. You will be instrumental in designing, developing, and implementing solutions that meet our business needs, while ensuring cross-platform compatibility and maintaining high security and performance standards.

Duties and Responsibilities

· Design and develop software applications and components, from concept through deployment, using .Net (C#, ASP) and SQL Server.

· Create responsive, user-friendly web applications ensuring cross-platform compatibility.

· Participate actively in all phases of the SDLC, including planning, development, testing, deployment, and maintenance.

· Architect and build robust EDI integration mappings to facilitate efficient data interchange.

· Draft technical specifications, test plans, and maintain detailed documentation, including user guides.

· Oversee system performance, conduct security audits, and manage integrations to ensure optimal operation.

· Stay abreast of the latest technology trends and tools, suggesting improvements and innovations to our tech stack.

Skill Requirements

· Diploma or Degree in Computing, IT, or related fields.

· Excellent analytical and problem-solving skills.

· Proficiency in MS SQL Server; strong programming skills in C#, Python, SQL; familiarity with .Net, ASP.NET MVC, HTML5, CSS3, Bootstrap, JavaScript, jQuery, AJAX, JSON.

· Experience with multiple development languages and a strong foundation in Object-Oriented Programming.

· Knowledge in cloud applications like Web API, Azure, Power BI.

· Familiarity with CargoWise or similar freight management systems is a plus.

· Experience working with integration tools like Microsoft BizTalk, MuleSoft, Altova MapForce, or BOOMI is a plus.

• Great working environment and collaborative members
• Opportunity to work with an experienced engineering team

About Our Client

Our client is a local multinational technology and engineering group in the aerospace, smart city as well as defence and public security sectors.

Job Description

• Perform software development and ensure the implementation of the system requirements.
• Aligned the given timeline and work with disciplinary team to achieve the goal and project requirements.
• Perform software and system testing and to ensure the product quality are with accurate unit-tests within the given product architecture and coding standard.
• Comply software Quality Management System and Safety requirements.

The Successful Applicant

• Working with programming skills in C, C++, C#, .NET architecture.
• Software development with software testing experience will be an advantage.
• Working in Avionics and Aviation-related domain would be preferred
• Computer networking knowledge
• Software development in RTOS (Real Time Operating System) and embedded environment.
• Knowledge of software development lifecycle processes and test methodologies.

What's on Offer

As a growing company with a tightly-knit team, they respect and listen to all the employees. You will get the chance to make an impact by having your voice heard by everyone. You will get the chance to enjoy a high level of autonomy at work.

· Minimum 6 years of experience in Data Engineering role with financing industry, ideally in a banking environment

· At least 3 years of development experience with using Microsoft Business Intelligence stack covering

o Tabular Analysis Service

o Data warehousing

o Performance tuning

o Data transformations and quality checks

o Power BI dashboarding and reporting

· Good exposure and usage experience in CI/CD tools / processes preferably Azure DevOps

· Ability to design and present technical solutions to architects and to team

· Proactive and problem solving attitude with ability to anticipate risks

· Strong communication (written and verbal) and organisational skills

“Do you have a passion for creating mouthwatering, fresh-baked delights? With over a 110-years of tradition, founded in the heart of Kobe, Kansai, Hyogo Prefecture, join our team at DONQ and be a part of the magic that goes into crafting our exquisite bread and pastries. As a Bread Production Specialist, your role will be an adventure in itself."

BENEFITS

======================================

Master the Art of Bread Production

Bonuses and Yearly Annual Increments

Annual Leave and Medical Leave Benefits

Amazing career growth and promotion opportunities

Leadership Allowances

JOB DESCRIPTION:

======================================

Bread Artistry: Dive into the world of bread production, where you'll have the opportunity to learn, create, and master the art of crafting delectable, high-quality bread. From kneading to baking, you'll be an integral part of the process, ensuring every product meets our exact standards.

Quality Assurance: Your keen eye for detail will be vital as you work diligently to maintain the exceptional quality of our products at every stage of production. Each loaf should be a masterpiece, and you'll be instrumental in making sure that happens.

Kitchen Mastery: Keeping our kitchen and bakery equipment spotless and in tip-top shape is a crucial part of your role. Your efforts will contribute to the efficiency and safety of our operations.

Team Player: Your role doesn't stop at the production floor. You'll also be an essential support system for our sales staff, ensuring the seamless operation of our store. This means you'll get a taste of the sales side of things as well, including cashiering, bread slicing, and providing exceptional customer service.

JOB REQUIREMENTS:

=====================================

· 5 to 6 days work per week

· Minimally 1 day off a week, 6 days off per month excluding public holidays

· 8 hours work per day, 1-hour break time

· Able to work on weekends (Preferred)

· No experience required, new comers are welcome

· Hygiene certificate would be an advantage

Job Description:

We are seeking a motivated Junior Software Engineer who is ready to apply the knowledge and skills obtained from their computer science or software engineering degree. The candidate will be involved in all aspects of software development, including Quality Control (QC) testing and understanding user requirements.

Responsibilities:

1. Participate in the entire application lifecycle, focusing on coding and debugging.
2. Assist in designing, developing, and implementing software solutions.
3. Understand and implement testing methodologies and practices.
4. Participate in QC testing, including writing and executing test cases, and documenting results.
5. Assist in identifying, logging, and tracking software defects.
6. Communicating with the product team and with end-users to understand user requirements and to translate them into software solutions.
7. Participate in code reviews to maintain code quality and share best practices and experiences with the team.
8. Collaborate with cross-functional teams to ensure smooth project execution.

Qualifications:

1. Bachelor's degree in Computer Science, Software Engineering, or a related field.
2. Understanding of software development principles.
3. Familiarity with any programming language (Javascript, Python is preferred).
4. Experience with web frameworks such as Django, and React is a plus.
5. Understanding of software QA methodologies, tools, and processes is a plus.
6. Strong communication skills.

Skills:

1. Ability to work autonomously in a team environment.
2. Ability to point out lapses in teamwork and initiative to begin a fix for such lapses.
3. Strong attention to consistency and detail.
4. Eagerness to learn about new technologies and software testing methodologies.
5. Ability to manage multiple tasks and work towards long-term goals.

Responsibilities:

• Your leadership and operations management skills will be highly improved.
• Leading a team of operators, technicians to achieve production goals.
• Provide support to clients' engineers on process development.
• Develop new and modified process formulations, handling equipment and reviews processing techniques and method.
• Manage equipment and setup process.
• Characterise process and equipment system to maintain and control process parameters.
• Troubleshoot process deviation and equipment malfunctions.
• Improve manufacturing yield and quality.

Requirements:

• Min Diploma in Material Science / Chemical / Electrical/Mechanical Engineering Or it's equivalent.
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis and DOE.
• Able to handle a team of a team of operators, technicians

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

ECO One Solutions Pte Ltd is looking for a highly skilled Principle Engineer to lead our switchgear business unit. The ideal candidate shall have the experience in providing our company technical solutions and lead the service roadmap.

Scope & Responsibilities:

1) Provide technical solutions.

2) Creating new customer account.

3) Leads team to execute the tasks.

4) Provide traning to workers.

5) Creating job duties and delegation.

6) Negotiate budgets with vendors.

Qualifications:

a) Bechelor degree in Electrical Engineering with 10+ years of experience.

b) Specialist knowledge in switchgears testing.

c) Strong in implementing complex technical solutions.

d) Excellent in communications and collaboration skills, with the ability to effectively interact with technical & non-technical customers.

ByteDance will be prioritizing applicants who have a current right to work in Singapore, and do not require ByteDance's sponsorship of a visa.

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok, Helo, and Resso, as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

At ByteDance, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for millions of users across all of our products. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at ByteDance.

Responsibilities

- Support the Sales Teams to Qualify leads, Identify Customers' Pain Points and Translate Technologies into Solutions that meet Customers' Business Goals.

- Call upon Technical Expertise and Sales Acumen to lead the Qualification process through Demos, Presentations, Architecture Design Sessions & Technical Workshops.

- Lead RFPs/RFIs/Hands-on POCs by owning the overall process, and ensuring an optimum collaboration across all stakeholders. Convert POCs into Contracts.

- Become a Trusted Advisor Internally and Externally by providing Thought Leadership, Industry Knowledge, and deep understanding across all Technologies that Bytedance B2B is providing.

- Collaborate with all stakeholders including Solution Team, Product Team, Strategy, and R&D, to help influence product roadmap based on Market Feedback in your region.

- Build or improve Tools and Processes to help scale highly customized Technical POCs.

- Present to C-Suite, Business and Technical stakeholders to help raise brand awareness of Bytedance B2B across APAC. Articulate Business and Technical value.

- Upsell, cross-sell and drive adoption of Bytedance solutions for existing customers.

Qualifications

- Engineering Bachelor degree and above;

- At least 1 - 3 years of related work experience, preferably AI-related or IT consultant solution & pre-sale role;

- Strong strategic thinking and analytical skills, deep understanding of the AI technologies as well as Industry vertical pain points

- Hands-On experience on the following technologies :

- Video/Image processing (OpenGL/C)

- Web and App Software development (JS, ios, Android)

- Databases, Analytics, AI.

- Experience in reading/writing programming languages (Server, Web, Android/iOS Mobile App), Deep Understanding of Software development technologies, Can manage debugging and troubleshooting, Comfortable with APIs;

- Knowledge in Cloud Infrastructures, Security and Compliance is a plus.

- Experience in Project Management;

- Data-Driven Pragmatism, critical thinking and outcome-driven;

- Comfortable with fast-paced and ambiguous "startup" environment

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Our client is from Oil and Gas industry. They are looking for a PLC Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Seeking a skilled PLC Engineer for a challenging role.
• Provide technical expertise and innovative solutions to support Production and ICEA teams.
• Regularly update stakeholders on the progress of PLC tasks aligned with site objectives.
• Maintain records of site shutdowns and production losses caused by PLC systems.
• Collaborate closely with Production teams to optimize PLC maintenance costs and enhance system performance.
• Develop comprehensive maintenance procedures for various plant equipment, including electrical, instruments, DCIS, F&G, ESD, metering, sampling, and analysis.
• Ensure compliance and certification of PLCs for safe use in hazardous areas.
• Offer maintenance support and troubleshoot PLC logic/hardware issues.
• Proactively manage PLC lifecycle to prevent obsolescence.
• Play a crucial role in emergency response, conduct feasibility studies, and ensure cybersecurity adherence in the OT environment.

Requirements:

• Min Degree in Electrical & Electronics Engineering or any relevant field.
• Min 3 years of experience in PLC Siemens S7 maintenance / design in Oil and Gas or Petrochemical Industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (NEW JIRN TONE)

Job Scope:

• Attend paid training for product understanding
• Provide technical support to customers
• Promptly respond to customer requests
• Travel for sales three days a week
• Contribute to account strategy and growth
• Execute successful product launches and Coordinate off-site events
• Increase market share in assigned territory
• Fulfill assigned duties/project

Job Requirement:

• Degree in engineering or a business-related field preferred
• Strong communication skills
• Goal-oriented and hardworking
• Desire for personal growth and training
• Preferred possession of a valid Class 3 License

Benefits:

• Performance-based monthly incentive and bonus
• Transport, medical, dental allowances, and AWS.
• Training provided

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

· Coordinate with the Wireless Network Service Provider to ensure that the availability of the Wireless Network is in accordance with the contractual Service Level Agreement

· Coordinate with Wireless Network Service Provider to ensure systems are properly configured and secured

· Monitor and review performance data to identify potential problems, and ensure issues are resolved in a timely manner

· Ensure that the Wireless Network runs efficiently and smoothly

· Assist in problem/incident resolution and determination

· Liaise with internal and external stakeholders on technical issues and needs

· Ensure that the Wireless Network related documentation are up to date

· Assist the Programme Manager in budget tracking

Requirements

· Bachelor’s degree in Computer Science, Information Technology, or related field.

· 3+ years of experience in network implementation.

· Hands-on experience with Wireless Controllers.

· Knowledge of network protocols, security architectures, and best practices.

· Strong analytical and problem-solving skills with attention to detail.

· Excellent communication and teamwork abilities.

Interested candidate please submit your CV directly to [email protected]

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R1105286 (Ngiam Xinyi)

Job Description

• ICA (Instrumentation, Control and Automation) related design for process plant (water/wastewater plant, incineration plant, etc.), from concept to implementation, ensuring project is delivered on time, within specifications and meeting industrial standards. ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks. Collaborate with process team to optimize the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Review project specifications, technical proposal/design documentations from the ICA subcontractor/supplier and liaise with project consultant / client for the approval of technical documentations/drawings.
• Support ICA related procurement work, develop cost estimates for ICA products and ICA works, and prepare the schedule for ICA works.
• Project coordination, ensure project is on schedule and is running smoothly, including handling technical matters at site, managing ICA subcontractor/supplier and working on site with clients and other stakeholders.
• Supervise installation and testing and commissioning of ICA works.
• Other duties as assigned by the management.

Requirements

• Minimum 4 years of experience in process plant electrical EPC work with Degree in Electrical , Electronic or Instrumentation Engineering or related Engineering Discipline. For Diploma holder, minimum 6 years of experience is required. For senior position, candidate must have at least 8 years of experience.
• Familiar with relevant code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D/Bentley is preferred.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Willingness to take on responsibility and make effort to meet deadlines.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• In-depth knowledge of control system architectures, such as PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater or incineration related control system.
• Relevant experience in ICA design and site work for water, wastewater treatment and incineration works.
• Highly motivated and ability to work independently with minimal supervision.
• Able to work in Tuas area.